California Eastern Laboratories WD6102 Zigbee Gateway User Manual Exhibit D Users Manual per 2 1033 b3
California Eastern Laboratories Zigbee Gateway Exhibit D Users Manual per 2 1033 b3
Exhibit D Users Manual per 2 1033 b3
CPD00 02 CGW W‐Z‐010 00 Userr Manuaal The Corteet Z100 Gatew way (CGW‐Z‐0 0100) is a devvice intended for use in various wirelesss sensor netw work (WSN), machine‐to‐maachine (M2M), and Interneet of Things (IIOT) applicatiions. The Corrtet Z100 Gateway o act as a reliable, secure, and low‐costt bridge betw ween two diffeerent IEEE is primarily intended to 802.15.4 wireless netw works such a ZigBee‐based d networks. The T Cortet Z10 00 Gateway can c as a ZigBeee Coordinattor (ZC) for on ne ZigBee nettwork, coordiinating comm munication of ZigBee end nodes using one of its two IEEEE 802.15.4 radios. The Co ortet Z100 Gaateway can act as ZigBee Router (ZR) on another ZiggBee network, acting as a baackhaul to an nother ZigBeee Coordinator (ZC) using itss other IEEE 802.15.4 radio o The 00 Gateway will w store, maintain, and peerform manyy critical configurable netw work functionss on Cortet Z10 the ZigBeee networks – particularly on o the ZigBeee network it iss coordinating as the ZC. Such function ns include grroupings of wireless devicees, rules goveerning the behavior of wireeless devices,, schedules governingg the behavior of wireless devices, etc. es information on the feattures of the Z100 Gatewayy and how to use the Z100. This document provide Conten nts 1.0 Z100 Features ............................................................................................................................................. 2 2.0 Z100 External Interrface .............................................................................................................................. 2 3.0 Setting up theZ100 0 ..................................................................................................................................... 2 A.1 IMPORTANT SAFETTY INSTRUCTIONS ......................................................................................................... 3 A.2 Moun nting Tab Use ..................................................................................................................................... 3 A.3 Speciffications ............................................................................................................................................. 4 A.4 Agenccy Certificatio ons ................................................................................................................................. 4 A.5 FCC & Canada Com mpliance Stateement ....................................................................................................... 4 A.6 Warning (Part 15.2 21) ................................................................................................................................. 4 Rev 3.0 1.0 Z100 Features The Thin Gateway has a modular design that uses a Power board and a Communication board. The Power board converts outside power to what is needed for the Communication board. The Communication board contains the radio and processor for Gateway operation. The Z100 contains the following features: Radio Board o 802.15.4 Radio for connecting to ZigBee RF devices o 802.15.4 Radio for connecting to ZigBee Backbone network o Power Connector for connecting to power board o Button o Tri‐color LED Power Board o Standard wall plug for connecting to North American wall socket o Power converter to convert from AC power to DC for Communication board Easy Commissioning Over‐the‐air firmware updates 2.0 Z100 External Interface The Z100 external interface contains: Button Tri‐Color LED Plug Safety Tab 3.0 Setting up theZ100 To setup the Thin Gateway follow these steps 1. Plug the Z100 into the wall socket 2. The Z100 LED illuminate based on the status of the device 3. Use the Cortet mobile app and follow on‐screen instructions Rev 3.0 A.1 IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. READ and KEEP these instructions FOLLOW all instructions DO NOT use this apparatus near water, Dry location use only DO NOT attempt to modify this product. Doing so could result in personal injury A.2 Mounting Tab Use CAUTION ‐ The Z100 has an integral mounting tab for optional semi‐permanent attachment to a grounded 15‐ampere, 125‐volt duplex receptacle. Use only with duplex receptacle having center screw. NOTICE ‐ Local Regulations in Canada do not permit use of a mounting tab. In Canada, do not use the mounting tab to attach the unit to an outlet Risk of Electric Shock – Disconnect power to the receptacle before installing or removing the unit. When removing receptacle cover screw, cover may fall across plug pins or receptacle may become displaced 1. Using a standard slotted screwdriver, remove the center plate screw from the wallplate (do not remove the wallplate itself). 2. Plug the device into the receptacle, oriented such that the mounting tab hole lines up with the wall plate screw hole. 3. Secure unit in place by receptacle cover screw Rev 3.0 ecification ns A.3 Spe Input AC Voltage 10 00‐240 VAC, 50/60 Hz Maximum m Current Draain 0.07A Operatingg Temperaturre Range ‐2 20 to 40C [‐4 to t 104F] Overall Prroduct Envelo ope Dimensio ons (includes mounting tab b and blades) 60 0.3 mm high x 51.0 mm wide x 59.2 mm m deep [2.37 in x 2.00 in x 2.33 in] Product Envelope Dimensions when n installed (in ncludes moun nting tab) 60 0.3 mm high x 51.0 mm wide x 42.1 mm m deep [2.37 in x 2.00 in x 1.66 in] AC input IEEC Type A, ungrounded, no on‐polarized A.4 Age ency Certtificationss The CGW‐‐Z‐0100 has been certified d per FCC Partt 15 rules and d to Industry Canada licensse‐exempt RSSS Standardss. To fulfill th he FCC and IC certification requirements, the label iss placed on th he outside of the device and contains itss own FCC ID and IC ID as shown below. The CGW‐ZZ‐0100 also co ontains CC ID: W7Z‐ZIC CM357SP2, IC C ID: 8254A‐ZZICM357SP2. transmitteer module FC Conforms to o FCC Part 15B FCC ID: W7ZZ‐WD6102 IC: 8254A‐W WD6102 A.5 FCC C & Canad da Compliiance Stattement This devicce complies with w Part 15 of the FCC rulees and with In ndustry Canad da license‐exeempt RSS Standardss. Operation is subject to the t followingg two conditio ons: (1 1) This device may not cause harmful in nterference and` (2 2) This device must accept any interfereence received d, including in nterference th hat may cause undesired op peration. Le présentt appareil est co onforme aux CNR d'Industrie e Canada appliccables aux app pareils radio exxempts de licen nce. L'exploitation est autorisé ée aux deux co onditions suivan ntes: 1.. l'appareil ne doit d pas produirre de brouillage e, et 2.. l'utilisateur de e l'appareil doit accepter tout brouillage radio oélectrique sub bi, même si le brouillage est su usceptible d'en n compromettre e le fonctionnem ment. A.6 Wa arning (Pa art 15.21)) Changes or o modifications s not expresslyy approved by CEL could void d the user's autthority to opera ate the equipme ent. Rev 3.0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : dwilde Create Date : 2016:06:30 13:39:27-05:00 Modify Date : 2016:06:30 13:39:27-05:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 11.0 (Windows) Format : application/pdf Title : Microsoft Word - 15. CPD002-CGW-Z-0100-UserManual-v03.docx Creator : dwilde Document ID : uuid:b1e8debb-3e76-48f6-84b3-a21d09901d32 Instance ID : uuid:54769991-8ca2-444f-9f02-ceae1ae396bc Page Count : 4EXIF Metadata provided by EXIF.tools