Callaway Golf MX5911016 Golf Course GPS Device User Manual User s manual

Download:
Mirror Download [FCC.gov]
Document ID	1459942
Application ID	CM0RY3j9xNr3GRZg04/cYg==
Document Description	User's manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.14kB (864214 bits)
Date Submitted	2011-05-05 00:00:00
Date Available	2011-05-05 00:00:00
Creation Date	2011-05-04 12:26:25
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2011-05-04 12:26:25
Document Title	User's manual
Document Creator	Adobe InDesign CS5 (7.0)

Getting Started
1. Download the “uPro CONNECTOR” software onto your
computer at www.callawayuxplore.com/downloads
2. Insert battery into your uPro MX device and power
on the device
3. Connect your device to your computer using the computer’s
USB port and the included USB cable
4. The Callaway UXplore website will launch automatically
after connecting your device
5. Register your device following the instructions on the website
6. Charge your device by either keeping the device connected
to your computer or using the included power adapter
and USB cable
Learn More
Find out more about the Callaway uPro MX at
www.callawayuxplore.com
Instructional Videos
Instructional videos on how to use your uPro MX are available
on the device. Touch the video icon from the main menu and
start the videos.
Visit www.callawayuxplore.com/uprosupport for technical support,
complete instructions, and important safety information.
©2011 Callaway Golf Company. Callaway, Callaway Golf, the Chevron device, UPRO, and ProMode are
trademarks and/or registered trademarks of Callaway Golf Company. ProMode courses require additional fees.
LED light
Power button
USB port
Optical finger navigation button
Insert the Battery
1. Open the battery compartment by unscrewing the screw
head until the battery cover is loose and can be removed by
lifting up gently
2. Insert the included Li-Ion battery by placing the
connector-side down to make contact with the device.
The text on the battery should be facing up. Handle your
Li-Ion battery with care. See battery warning for
additional information
3. Replace the battery cover by sliding it into place and
tightening the screw until the battery cover is no longer loose 		
(do not over-tighten the screw)
Battery Cover
Screw Head
Charging Options
Charge by Plugging into a Power Outlet
1. Plug USB Cable into the USB Socket on the USB Power Adapter
2. Plug USB Power Adapter into a power outlet
3. Plug the smaller end of the USB Cable into the micro
USB connector on the uPro MX device, pushing firmly
to establish a complete connection
4. Verify the LED light has illuminated red signifying the device is
charging or the LED light is flashing red indicating the battery is
charged. The battery will take approximately 3 hours to fully charge
Charge by Plugging into a Computer
1. Plug the USB Cable into an available USB port on your powered
on computer
2. Plug the USB Cable into the Micro USB connector on the uPro MX
device, pushing firmly to establish a complete connection
3. Verify the LED light has illuminated red signifying the device is
charging or the LED light is flashing red indicating the battery is
charged. The Battery will take approximately 3 hours to fully charge
Note: Some USB ports do not support charging. If LED light is not illuminated, try
additional USB ports or plug directly in the wall adapter and plug into a power outlet
FCC COMPLIANCE STATEMENT (USA)
FCC Class B Part 15
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
WARNING: Changes or modifications to this unit not expressly
approved by the manufacturer could void the user’s authority to
operate this equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
˜FYcf]YbhcffY`cWUhYh\YfYWY]j]b[UbhYbbU"
˜=bWfYUgYh\YgYdUfUh]cbVYhkYYbh\YYei]daYbhUbXfYWY]jYf"
˜7cbbYWhh\YYei]daYbh]bhcUbcih`YhcbUW]fWi]hX]ZZYfYbhZfca
that to which the receiver is connected.
˜7cbgi`hh\YXYU`YfcfUbYldYf]YbWYXfUX]c#HJhYW\b]W]UbZcf\Y`d"
Industry Canada Standard (Canada 310)
This Category II radiocommunication device complies with Industry
Canada Standard RSS-310. Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that
may cause undesired operation of the device.
Ce dispositif de radiocommunication de catégorie II respecte la
norme CNR-310 d’Industrie Canada. Son fonctionnement est
subordonné aux deux conditions suivantes : (1) ce dispositif ne
doit pas produire d’interférences, et (2) ce dispositif doit pouvoir
supporter toute interférence, y compris les interférences qui
peuvent nuire à son fonctionnement.
Note Regarding Callaway uPro MX
The Callaway uPro MX GPS unit is not to be discarded in the normal
kUghYghfYUa `cWU`#fY[]cbU`gmghYagYl]ghhcX]gdcgYcZY`YWhfcb]Wg"5gUbYbXigYf#WcbgiaYfmciWcbhf]VihYVmYbgif]b[h\Uhh\]g
device is disposed of properly.
BATTERY WARNING
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2011:05:04 12:26:25-07:00
Create Date                     : 2011:05:04 12:26:25-07:00
Metadata Date                   : 2011:05:04 12:26:25-07:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Format                          : application/pdf
Document ID                     : uuid:0a9d21b2-2cb3-4cfd-a7fb-94d5e585024e
Instance ID                     : uuid:5c745c10-4050-4d86-b52e-af3eab0b4566
Producer                        : Adobe PDF Library 9.9
Page Count                      : 5
Creator Version                 : 15
Container Version               : 9
Creator                         : Adobe Illustrator(R) 15.0
For                             : Samuel Carter,
Title                           : FCC_BatteryWarning
Bounding Box                    : 0 -324 864 0

EXIF Metadata provided by EXIF.tools