Cambium Networks 45700 Wireless Ethernet Bridge, Dual Channel OFDM MIMO Combination Point to Point / Point to Multipoint Equipment User Manual PTP700 Series User Guide
Cambium Networks Limited Wireless Ethernet Bridge, Dual Channel OFDM MIMO Combination Point to Point / Point to Multipoint Equipment PTP700 Series User Guide
Contents
Installation Guide Part 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2625257 |
| Application ID | 4W/NvTHNIEUfJ9KUz0/K0Q== |
| Document Description | Installation Guide Part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 446.3kB (5578784 bits) |
| Date Submitted | 2015-05-27 00:00:00 |
| Date Available | 2015-07-27 00:00:00 |
| Creation Date | 2015-05-26 16:31:23 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2015-05-26 16:35:50 |
| Document Title | PTP700 Series User Guide |
| Document Creator | Acrobat PDFMaker 11 for Word |
| Document Author: | Cambium Networks |
Cambium PTP 700 Series User Guide System Release 700-01-00 Accuracy While reasonable efforts have been made to assure the accuracy of this document, Cambium Networks assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. Cambium reserves the right to make changes to any products described herein to improve reliability, function, or design, and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Cambium does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Cambium products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Cambium intends to announce such Cambium products, programming, or services in your country. Copyrights This document, Cambium products, and 3rd Party software products described in this document may include or describe copyrighted Cambium and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Cambium, its licensors, and other 3rd Party supplied software certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Cambium, its licensors, or the 3rd Party software supplied material contained in the Cambium products described in this document may not be copied, reproduced, reverse engineered, distributed, merged or modified in any manner without the express written permission of Cambium. Furthermore, the purchase of Cambium products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Cambium or other 3rd Party supplied software, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product. Restrictions Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Cambium. License Agreements The software described in this document is the property of Cambium and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. High Risk Materials Cambium and its supplier(s) specifically disclaim any express or implied warranty of fitness for any high risk activities or uses of its products including, but not limited to, the operation of nuclear facilities, aircraft navigation or aircraft communication systems, air traffic control, life support, or weapons systems (âHigh Risk Useâ). Any High Risk is unauthorized, is made at your own risk and you shall be responsible for any and all losses, damage or claims arising out of any High Risk Use. Š 2015 Cambium Networks Limited. All Rights Reserved. phn-4148_000v008 (May 2015) Contents About This User Guide .......................................................................................................................... 1 Contacting Cambium Networks .................................................................................................... 1 Purpose ........................................................................................................................................... 2 Cross references ............................................................................................................................. 2 Feedback ......................................................................................................................................... 2 Important regulatory information........................................................................................................ 3 Radar avoidance ............................................................................................................................. 3 USA and Canada specific information ......................................................................................... 3 Renseignements specifiques aux USA et au Canada ................................................................. 4 EU Declaration of Conformity ....................................................................................................... 4 Application firmware ..................................................................................................................... 4 Specific expertise and training for professional installers ......................................................... 4 Avoidance of weather radars ........................................................................................................ 4 External antennas ........................................................................................................................... 5 Antennas externes ......................................................................................................................... 5 Ethernet networking skills ............................................................................................................. 5 Lightning protection....................................................................................................................... 5 Training ........................................................................................................................................... 6 Problems and warranty ........................................................................................................................ 7 Reporting problems ....................................................................................................................... 7 Repair and service .......................................................................................................................... 7 Hardware warranty ........................................................................................................................ 7 Security advice ...................................................................................................................................... 8 Warnings, cautions, and notes ............................................................................................................ 9 Warnings ......................................................................................................................................... 9 Cautions .......................................................................................................................................... 9 Notes ............................................................................................................................................... 9 Caring for the environment ................................................................................................................ 10 In EU countries ............................................................................................................................. 10 In non-EU countries ..................................................................................................................... 10 Chapter 1: Product description....................................................................................................... 1-1 Overview of the PTP 700 Series ........................................................................................................ 1-2 Purpose ........................................................................................................................................ 1-2 Key features ................................................................................................................................. 1-2 Frequency bands ......................................................................................................................... 1-3 Typical bridge deployment ........................................................................................................ 1-4 Hardware overview ..................................................................................................................... 1-5 Page i Contents Wireless operation ............................................................................................................................. 1-6 Time division duplexing ............................................................................................................. 1-6 Link mode optimization .............................................................................................................. 1-8 Link symmetry ............................................................................................................................. 1-9 OFDM and channel bandwidth ................................................................................................ 1-10 Spectrum management ............................................................................................................ 1-11 Adaptive modulation ................................................................................................................ 1-12 MIMO .......................................................................................................................................... 1-13 Dynamic spectrum optimization .............................................................................................. 1-14 Radar avoidance ........................................................................................................................ 1-14 Encryption .................................................................................................................................. 1-15 License keys and regulatory bands ......................................................................................... 1-16 PTP networks ............................................................................................................................. 1-17 TDD synchronization (PTP-SYNC) ........................................................................................... 1-18 Ethernet bridging ............................................................................................................................. 1-21 Ethernet ports ............................................................................................................................ 1-21 Data and management services .............................................................................................. 1-21 Data network .............................................................................................................................. 1-23 Second Data network ................................................................................................................ 1-25 Out-of-Band Management Service .......................................................................................... 1-27 Ethernet loopback mode........................................................................................................... 1-29 Protocol model .......................................................................................................................... 1-30 Synchronous Ethernet .............................................................................................................. 1-31 IEEE 1588-2008 Transparent Clock .......................................................................................... 1-32 TDM bridging.................................................................................................................................... 1-34 TDM description ........................................................................................................................ 1-34 Lowest TDM modulation mode ............................................................................................... 1-35 Fixed frequency operation ....................................................................................................... 1-35 Ethernet cables for TDM ........................................................................................................... 1-36 Further reading .......................................................................................................................... 1-36 System management ....................................................................................................................... 1-37 Management agent ................................................................................................................... 1-37 Network management .............................................................................................................. 1-38 IPv6 ............................................................................................................................................. 1-40 Web server ................................................................................................................................. 1-41 RADIUS authentication ............................................................................................................. 1-43 SNMP.......................................................................................................................................... 1-44 Simple Network Time Protocol (SNTP) ................................................................................... 1-45 SNMPv3 security ....................................................................................................................... 1-46 System logging (syslog) ........................................................................................................... 1-49 AES license ................................................................................................................................ 1-49 Critical security parameters ..................................................................................................... 1-50 Software upgrade ...................................................................................................................... 1-51 Page ii Contents Capability upgrades .................................................................................................................. 1-52 Full capability trial period ......................................................................................................... 1-52 Recovery mode .......................................................................................................................... 1-53 FIPS 140-2 mode .............................................................................................................................. 1-54 FIPS 140-2 approved mode ...................................................................................................... 1-54 Exiting from the FIPS operational state .................................................................................. 1-57 Reverting to the standard (non-FIPS) mode ........................................................................... 1-57 Chapter 2: System hardware .......................................................................................................... 2-1 Outdoor unit (ODU) ........................................................................................................................... 2-2 ODU description .......................................................................................................................... 2-2 PTP 700 Connectorized ODU ...................................................................................................... 2-3 PTP 700 Connectorized+Integrated ODU .................................................................................. 2-6 ODU capability upgrades............................................................................................................ 2-8 ODU accessories ......................................................................................................................... 2-9 ODU mounting brackets ............................................................................................................. 2-9 ODU interfaces .......................................................................................................................... 2-12 ODU specifications .................................................................................................................... 2-14 Power supply units (PSU)................................................................................................................ 2-15 PSU description ......................................................................................................................... 2-15 PSU part numbers ..................................................................................................................... 2-16 AC+DC Enhanced Power Injector interfaces ........................................................................... 2-16 PSU specifications..................................................................................................................... 2-17 Antennas and antenna cabling ....................................................................................................... 2-19 Antenna requirements .............................................................................................................. 2-19 RF cable and connectors........................................................................................................... 2-19 Antenna accessories ................................................................................................................. 2-20 FCC and IC approved antennas ................................................................................................ 2-20 Antennes approuvĂŠes par la FCC et IC .................................................................................... 2-21 Ethernet cabling ............................................................................................................................... 2-34 Ethernet standards and cable lengths ..................................................................................... 2-34 Outdoor copper Cat5e Ethernet cable ..................................................................................... 2-35 Cable grounding kit ................................................................................................................... 2-36 Lightning protection unit (LPU) and grounding kit ................................................................ 2-37 LPU for GPS drop cables .......................................................................................................... 2-38 RJ45 connectors and spare glands .......................................................................................... 2-39 Cable hoisting grip .................................................................................................................... 2-40 Drop cable tester ....................................................................................................................... 2-40 Indoor Cat5e cable .................................................................................................................... 2-40 SFP module kits ......................................................................................................................... 2-41 Optical cable and connectors ................................................................................................... 2-43 PTP-SYNC unit .................................................................................................................................. 2-44 PTP-SYNC unit description ....................................................................................................... 2-44 PTP-SYNC part numbers .......................................................................................................... 2-45 Page iii Contents PTP-SYNC unit interfaces ......................................................................................................... 2-46 PTP-SYNC specifications .......................................................................................................... 2-47 GPS receiver ..................................................................................................................................... 2-50 GPS receiver description .......................................................................................................... 2-50 GPS receiver part numbers ...................................................................................................... 2-51 Twelve way circular connector ................................................................................................ 2-51 Network indoor unit (NIDU) ............................................................................................................ 2-52 NIDU description ....................................................................................................................... 2-52 NIDU part numbers ................................................................................................................... 2-53 NIDU interfaces ......................................................................................................................... 2-53 NIDU specifications ................................................................................................................... 2-54 Chapter 3: System planning ........................................................................................................... 3-1 Typical deployment ........................................................................................................................... 3-2 ODU with POE interface to PSU ................................................................................................. 3-2 E1 or T1 interfaces ....................................................................................................................... 3-5 SFP and Aux Ethernet interfaces ............................................................................................... 3-6 GPS receiver interfaces............................................................................................................... 3-9 Site planning..................................................................................................................................... 3-11 Grounding and lightning protection........................................................................................ 3-11 Lightning protection zones ....................................................................................................... 3-11 Site grounding system.............................................................................................................. 3-12 ODU and external antenna location ........................................................................................ 3-13 ODU ambient temperature limits ............................................................................................ 3-13 ODU wind loading ..................................................................................................................... 3-14 Hazardous locations .................................................................................................................. 3-15 PSU DC power supply............................................................................................................... 3-15 PSU location .............................................................................................................................. 3-16 PTP-SYNC location .................................................................................................................... 3-16 GPS receiver location................................................................................................................ 3-16 NIDU location ............................................................................................................................ 3-17 Drop cable grounding points ................................................................................................... 3-17 LPU location ............................................................................................................................... 3-18 Multiple LPUs ............................................................................................................................ 3-18 Radio spectrum planning ................................................................................................................ 3-21 General wireless specifications ............................................................................................... 3-21 Regulatory limits ....................................................................................................................... 3-22 Conforming to the limits........................................................................................................... 3-22 Available spectrum ................................................................................................................... 3-23 Channel bandwidth ................................................................................................................... 3-23 Frequency selection .................................................................................................................. 3-23 Avoidance of weather radars (USA only) ............................................................................... 3-24 Link planning .................................................................................................................................... 3-25 LINKPlanner ............................................................................................................................... 3-25 Page iv Contents Range and obstacles ................................................................................................................. 3-25 LINKPlanner for synchronized networks ................................................................................. 3-26 Path loss ..................................................................................................................................... 3-26 Adaptive modulation ................................................................................................................ 3-26 Calculating data rate capacity .................................................................................................. 3-27 Planning for connectorized units .................................................................................................... 3-29 When to install connectorized units ........................................................................................ 3-29 Choosing external antennas .................................................................................................... 3-29 Calculating RF cable length (5.8 GHz FCC only) ..................................................................... 3-30 Configuration options for TDD synchronization ........................................................................... 3-31 Single link configuration with PTP-SYNC ............................................................................... 3-32 Cluster with PTP-SYNC and GPS receiver .............................................................................. 3-33 Cluster with PTP-SYNC and no GPS receiver ......................................................................... 3-34 Data network planning .................................................................................................................... 3-35 Ethernet interfaces .................................................................................................................... 3-35 Layer two control protocols ..................................................................................................... 3-35 Ethernet port allocation ............................................................................................................ 3-36 VLAN membership .................................................................................................................... 3-45 Priority for management traffic ............................................................................................... 3-45 IP interface ................................................................................................................................. 3-45 Quality of service for bridged Ethernet traffic ........................................................................ 3-46 âDaisy-chainingâ PTP 700 links ............................................................................................... 3-47 Green Ethernet switches........................................................................................................... 3-47 TDM network planning .................................................................................................................... 3-48 Network management planning ..................................................................................................... 3-49 Planning for SNMP operation .................................................................................................. 3-49 Supported diagnostic alarms ................................................................................................... 3-50 Enabling SNMP ......................................................................................................................... 3-50 Security planning ............................................................................................................................. 3-51 Planning for SNTP operation ................................................................................................... 3-51 Planning for HTTPS/TLS operation .......................................................................................... 3-51 Planning for SNMPv3 operation .............................................................................................. 3-52 Planning for RADIUS operation ............................................................................................... 3-57 Planning for FIPS 140-2 operation ........................................................................................... 3-58 System threshold, output power and link loss.............................................................................. 3-60 Data throughput capacity tables ..................................................................................................... 3-71 TDM traffic load ....................................................................................................................... 3-116 Chapter 4: Legal and regulatory information ................................................................................ 4-1 Cambium Networks end user license agreement ........................................................................... 4-2 Definitions .................................................................................................................................... 4-2 Acceptance of this agreement ................................................................................................... 4-2 Grant of license ........................................................................................................................... 4-2 Conditions of use ........................................................................................................................ 4-3 Page v Contents Title and restrictions ................................................................................................................... 4-4 Confidentiality ............................................................................................................................. 4-4 Right to use Cambiumâs name ................................................................................................... 4-5 Transfer ........................................................................................................................................ 4-5 Updates ........................................................................................................................................ 4-5 Maintenance ................................................................................................................................ 4-5 Disclaimer .................................................................................................................................... 4-6 Limitation of liability ................................................................................................................... 4-6 U.S. government ......................................................................................................................... 4-6 Term of license ............................................................................................................................ 4-7 Governing law ............................................................................................................................. 4-7 Assignment .................................................................................................................................. 4-7 Survival of provisions ................................................................................................................. 4-7 Entire agreement ......................................................................................................................... 4-7 Third party software.................................................................................................................... 4-7 Compliance with safety standards ................................................................................................. 4-22 Electrical safety compliance ..................................................................................................... 4-22 Electromagnetic compatibility (EMC) compliance ................................................................. 4-22 Human exposure to radio frequency energy .......................................................................... 4-23 Hazardous location compliance ............................................................................................... 4-27 Compliance with radio regulations ................................................................................................ 4-28 Type approvals .......................................................................................................................... 4-29 FCC/IC compliance .................................................................................................................... 4-30 European Union compliance .................................................................................................... 4-38 Chapter 5: Installation .................................................................................................................... 5-1 Safety .................................................................................................................................................. 5-2 Hazardous locations .................................................................................................................... 5-2 Power lines .................................................................................................................................. 5-2 Working at heights ...................................................................................................................... 5-2 PSU ............................................................................................................................................... 5-2 Grounding and protective earth ................................................................................................ 5-2 DC supply ..................................................................................................................................... 5-3 Powering down before servicing ............................................................................................... 5-3 Primary disconnect device ......................................................................................................... 5-3 External cables ............................................................................................................................ 5-3 Drop cable tester ......................................................................................................................... 5-3 Grounding PTP-SYNC ................................................................................................................. 5-3 RF exposure near the antenna ................................................................................................... 5-4 Minimum separation distances ................................................................................................. 5-4 Grounding and lightning protection requirements .................................................................. 5-4 Grounding cable installation methods ...................................................................................... 5-4 Siting ODUs and antennas ......................................................................................................... 5-4 Thermal Safety ............................................................................................................................ 5-5 Page vi Contents ODU variants and mounting bracket options .................................................................................. 5-6 Installing the ODU and top LPU ........................................................................................................ 5-7 Attach ground cables to the ODU .............................................................................................. 5-7 Mount the ODU on the mast ...................................................................................................... 5-7 Mount the top LPU .................................................................................................................... 5-12 Interconnect and ground the ODU and top LPU .................................................................... 5-12 Install external antennas ................................................................................................................. 5-14 Installing the copper Cat5e Ethernet interface .............................................................................. 5-16 Install the ODU to top LPU drop cable .................................................................................... 5-16 Install the main drop cable ....................................................................................................... 5-18 Install the bottom LPU to PSU drop cable .............................................................................. 5-21 Test resistance in the drop cable ............................................................................................. 5-23 Installing the PSU ............................................................................................................................. 5-24 Installing the AC+DC Enhanced Power Injector ..................................................................... 5-24 Installing a PTP-SYNC unit .............................................................................................................. 5-26 Mounting the PTP-SYNC unit ................................................................................................... 5-26 Connecting up the PTP-SYNC unit .......................................................................................... 5-27 Powering up the PTP-SYNC installation ................................................................................. 5-29 Installing a GPS receiver ................................................................................................................. 5-30 Mounting the GPS receiver ...................................................................................................... 5-30 Preparing the GPS drop cable .................................................................................................. 5-30 Assembling an RJ45 plug and housing for GPS .................................................................... 5-31 Assembling a 12 way circular connector ................................................................................ 5-33 Connecting the GPS drop cable ............................................................................................... 5-37 Top grounding point for GPS adapter cable........................................................................... 5-38 Installing and connecting the GPS LPU .................................................................................. 5-39 Installing a NIDU .............................................................................................................................. 5-40 Mounting the NIDU ................................................................................................................... 5-40 Connecting the NIDU to the PSU, LAN and TDM cables ....................................................... 5-41 Connecting the NIDU to a DC power supply .......................................................................... 5-43 Installing an SFP Ethernet interface ............................................................................................... 5-46 Fitting the long cable gland ...................................................................................................... 5-48 Inserting the SFP module ......................................................................................................... 5-49 Connecting the cable ................................................................................................................ 5-51 Fitting the gland ........................................................................................................................ 5-52 Removing the cable and SFP module ..................................................................................... 5-54 Installing an Aux Ethernet interface ............................................................................................... 5-55 Supplemental installation information .......................................................................................... 5-56 Stripping drop cable ................................................................................................................. 5-56 Creating a drop cable grounding point ................................................................................... 5-57 Weatherproofing an N type connector.................................................................................... 5-60 Replacing PSU fuses ................................................................................................................. 5-63 Chapter 6: Configuration and alignment ....................................................................................... 6-1 Page vii Contents Preparing for configuration and alignment ..................................................................................... 6-2 Safety precautions ...................................................................................................................... 6-2 Regulatory compliance ............................................................................................................... 6-2 Selecting configuration options ................................................................................................. 6-3 Generating license keys .............................................................................................................. 6-3 Connecting to the unit ....................................................................................................................... 6-4 Configuring the management PC .............................................................................................. 6-4 Connecting to the PC and powering up .................................................................................... 6-5 Using the web interface ..................................................................................................................... 6-6 Logging into the web interface .................................................................................................. 6-6 Using the menu options ............................................................................................................. 6-7 Installation menu ............................................................................................................................... 6-9 Starting the Installation Wizard ................................................................................................. 6-9 Disarm Installation page ........................................................................................................... 6-10 Current Installation Summary page ........................................................................................ 6-10 Software License Key page ...................................................................................................... 6-11 Interface Configuration page ................................................................................................... 6-14 Wireless Configuration page .................................................................................................... 6-21 TDD synchronization page (optional) ...................................................................................... 6-27 Confirm Installation Configuration page................................................................................. 6-29 System menu.................................................................................................................................... 6-30 System Configuration page ..................................................................................................... 6-30 LAN Configuration page ........................................................................................................... 6-34 QoS Configuration page ........................................................................................................... 6-44 SFP Configuration page ............................................................................................................ 6-48 TDM Configuration page .......................................................................................................... 6-50 Save and Restore Configuration page .................................................................................... 6-52 Reset Configuration page ......................................................................................................... 6-54 Further reading .......................................................................................................................... 6-55 Software Upgrade page............................................................................................................ 6-55 Management menu .......................................................................................................................... 6-58 Web-Based Management page ................................................................................................ 6-58 Local User Accounts page ........................................................................................................ 6-61 RADIUS Configuration page .................................................................................................... 6-66 Webpage Properties page ........................................................................................................ 6-68 Email Configuration page ......................................................................................................... 6-71 Diagnostic Alarms page............................................................................................................ 6-73 Time Configuration page .......................................................................................................... 6-74 Syslog Configuration page ....................................................................................................... 6-78 SNMP pages (for SNMPv3) ............................................................................................................. 6-80 Current SNMP Summary (for SNMPv3).................................................................................. 6-80 Step 1: SNMP Configuration (for SNMPv3) ............................................................................ 6-81 Step 2: SNMP MIB-II System Objects (for SNMPv3) .............................................................. 6-83 Page viii Contents Step 3: SNMP User Policy Configuration (for SNMPv3) ........................................................ 6-84 Step 4: SNMP User Accounts Configuration (for SNMPv3) .................................................. 6-85 Step 5: SNMP Trap Configuration (for SNMPv3) ................................................................... 6-87 Confirm SNMP Configuration (for SNMPv3) .......................................................................... 6-88 SNMP pages (for SNMPv1/2c) ........................................................................................................ 6-89 Current SNMP Summary (for SNMPv1/2c) ............................................................................. 6-89 Step 1: SNMP Configuration (for SNMPv1/2c) ....................................................................... 6-89 Step 2: SNMP MIB-II System Objects (for SNMPv1/2c) ......................................................... 6-90 Step 3: SNMP Trap Configuration (for SNMPv1/2c) .............................................................. 6-91 Confirm SNMP Configuration (for SNMPv1/2c) ..................................................................... 6-92 Security menu .................................................................................................................................. 6-93 Preparing for HTTPS/TLS.......................................................................................................... 6-93 Security Configuration Wizard page ....................................................................................... 6-94 Step 1: Enter Key of Keys ......................................................................................................... 6-95 Step 2: Enter TLS Private Key and Public Certificate ............................................................. 6-96 Step 3: Enter User Security Banner ......................................................................................... 6-97 Step 4: Enter Login Information Settings................................................................................ 6-98 Step 5: Enter Random Number Entropy Input ....................................................................... 6-99 Step 6: Enter Wireless Link Encryption Key .......................................................................... 6-100 Step 7: Enter HTTP and Telnet Settings ................................................................................ 6-101 Step 8: Commit Security Configuration ................................................................................ 6-103 Zeroize CSPs page................................................................................................................... 6-104 Configuring security for FIPS 140-2 applications ........................................................................ 6-105 Prerequisites for FIPS 140-2 configuration ........................................................................... 6-105 Configuration procedures for FIPS 140-2 .............................................................................. 6-106 Checking that the unit is in the FIPS 140-2 operational state .............................................. 6-106 Aligning antennas .......................................................................................................................... 6-108 Starting up the units ............................................................................................................... 6-108 Checking that the units are armed ......................................................................................... 6-108 Aligning antennas ................................................................................................................... 6-109 Aligning separate antennas for spatial diversity .................................................................. 6-110 ODU installation tones ............................................................................................................ 6-111 Graphical Install page ............................................................................................................. 6-113 Disarming the units ................................................................................................................. 6-114 Comparing actual to predicted performance ....................................................................... 6-115 Other configuration tasks .............................................................................................................. 6-116 Connecting to the network ..................................................................................................... 6-116 Upgrading software using TFTP ............................................................................................ 6-117 Chapter 7: Operation ...................................................................................................................... 7-1 System summary and status ............................................................................................................ 7-2 System Summary page .............................................................................................................. 7-2 System Status page .................................................................................................................... 7-3 Rebooting and logging out ............................................................................................................. 7-15 Page ix Contents Login Information page ............................................................................................................ 7-15 Reboot Wireless Unit page ....................................................................................................... 7-15 Change Password page ............................................................................................................ 7-16 Logging out ................................................................................................................................ 7-16 Alarms, alerts and messages .......................................................................................................... 7-17 Alarms ........................................................................................................................................ 7-17 Email alerts ................................................................................................................................ 7-21 Syslog page ............................................................................................................................... 7-22 Format of syslog server messages .......................................................................................... 7-22 Configuration and status messages ........................................................................................ 7-23 Event messages ......................................................................................................................... 7-23 Spectrum Management ................................................................................................................... 7-26 Spectrum Expert ........................................................................................................................ 7-26 Spectrum Management Settings ............................................................................................. 7-31 Interpreting the receive spectrum plot .................................................................................... 7-33 Barring channels ....................................................................................................................... 7-39 Selecting a Channel and a Time period .................................................................................. 7-41 Interpreting the timeseries plot ............................................................................................... 7-42 Interpreting the Interference Waterfall plot ............................................................................ 7-43 Interpreting the histogram plot ................................................................................................ 7-45 Managing security ........................................................................................................................... 7-46 Exiting FIPS 140-2 approved mode ......................................................................................... 7-46 Zeroizing critical security parameters ..................................................................................... 7-46 System statistics .............................................................................................................................. 7-47 System Statistics page.............................................................................................................. 7-47 Wireless Port Counters page .................................................................................................... 7-52 Main Port Counters page .......................................................................................................... 7-53 Aux Port Counters page............................................................................................................ 7-56 SFP Port Counters page ............................................................................................................ 7-57 SyncE Status page .................................................................................................................... 7-58 Diagnostics Plotter page ........................................................................................................... 7-61 Generate Downloadable Diagnostics page............................................................................. 7-62 Recovery mode ................................................................................................................................ 7-63 Entering recovery mode ........................................................................................................... 7-63 Upgrading software image....................................................................................................... 7-65 Resetting IP & Ethernet configuration ..................................................................................... 7-66 Resetting all configuration data ............................................................................................... 7-67 Zeroize Critical Security Parameters ....................................................................................... 7-69 Rebooting the unit..................................................................................................................... 7-70 Chapter 8: Troubleshooting ........................................................................................................... 8-1 Cable Diagnostics ............................................................................................................................... 8-2 Test scenarios .............................................................................................................................. 8-2 Cable Diagnostics test................................................................................................................. 8-3 Page x Contents Testing link end hardware ................................................................................................................. 8-7 AC+DC Enhanced power injector LED sequence ..................................................................... 8-7 Ethernet packet test................................................................................................................... 8-10 Testing the radio link ....................................................................................................................... 8-13 No activity .................................................................................................................................. 8-13 Some activity ............................................................................................................................. 8-13 Radio and television interference ............................................................................................ 8-14 Testing PTP-SYNC ............................................................................................................................ 8-15 Checking the PTP-SYNC LEDs .................................................................................................. 8-15 LEDs do not illuminate.............................................................................................................. 8-16 STATUS LED is on steady ........................................................................................................ 8-16 STATUS LED double-blinks ...................................................................................................... 8-16 ODU LED does not illuminate within 90 seconds .................................................................. 8-16 ODU LED blinks red................................................................................................................... 8-16 GPS LED does not illuminate or blink on clustered units...................................................... 8-17 Testing a TDM link ........................................................................................................................... 8-18 Checking the NIDU LEDs .......................................................................................................... 8-18 Performing a TDM loopback test ............................................................................................. 8-19 Checking for 1000BASE-T operation ....................................................................................... 8-19 Glossary .................................................................................................................................................. I Page xi About This User Guide This guide describes the planning, installation, configuration and operation of the Cambium PTP 700 Series of point-to-point wireless Ethernet bridges. It is intended for use by the system designer, system installer and system administrator. For radio network design, refer to the following chapters: ⢠Chapter 1: Product description ⢠Chapter 2: System hardware ⢠Chapter 3: System planning ⢠Chapter 4: Legal and regulatory information For radio equipment installation, refer to the following chapter: ⢠Chapter 5: Installation For system configuration, monitoring and fault-finding, refer to the following chapters: ⢠Chapter 6: Configuration and alignment ⢠Chapter 7: Operation ⢠Chapter 8: Troubleshooting Contacting Cambium Networks Support website: http://www.cambiumnetworks.com/support Main website: http://www.cambiumnetworks.com Sales enquiries: solutions@cambiumnetworks.com Support enquiries: support@cambiumnetworks.com Telephone number list: http://www.cambiumnetworks.com/contact Address: Cambium Networks Limited, Linhay Business Park, Eastern Road, Ashburton, Devon, UK, TQ13 7UP Page 1 About This User Guide Important regulatory information Purpose Cambium Networks Point-To-Point (PTP) documents are intended to instruct and assist personnel in the operation, installation and maintenance of the Cambium PTP equipment and ancillary devices. It is recommended that all personnel engaged in such activities be properly trained. Cambium disclaims all liability whatsoever, implied or express, for any risk of damage, loss or reduction in system performance arising directly or indirectly out of the failure of the customer, or anyone acting on the customer's behalf, to abide by the instructions, system parameters, or recommendations made in this document. Cross references References to external publications are shown in italics. Other cross references, emphasized in blue text in electronic versions, are active links to the references. This document is divided into numbered chapters that are divided into sections. Sections are not numbered, but are individually named at the top of each page, and are listed in the table of contents. Feedback We appreciate feedback from the users of our documents. This includes feedback on the structure, content, accuracy, or completeness of our documents. Send feedback to support@cambiumnetworks.com. Page 2 About This User Guide Important regulatory information Important regulatory information The PTP 700 product is certified as an unlicensed device in frequency bands where it is not allowed to cause interference to licensed services (called primary users of the bands). Radar avoidance In countries where radar systems are the primary band users, the regulators have mandated special requirements to protect these systems from interference caused by unlicensed devices. Unlicensed devices must detect and avoid co-channel operation with radar systems. The PTP 700 provides detect and avoid functionality for countries and frequency bands requiring protection for radar systems. Installers and users must meet all local regulatory requirements for radar detection. To meet these requirements, users must install a license key for the correct country during commissioning of the PTP 700. If this is not done, installers and users may be liable to civil and criminal penalties. Contact the Cambium helpdesk if more guidance is required. USA and Canada specific information The USA Federal Communications Commission (FCC) has asked manufacturers to implement special features to prevent interference to weather radar systems that operate in the band 5600 MHz to 5650 MHz. These features must be implemented in all products able to operate outdoors in the band 5470 MHz to 5725 MHz. Manufacturers must ensure that such radio products cannot be configured to operate outside of FCC rules; specifically it must not be possible to disable or modify the radar protection functions that have been demonstrated to the FCC. In order to comply with these FCC requirements, Cambium supplies variants of the PTP 700 for operation in the USA or Canada. These variants are only allowed to operate with license keys that comply with FCC/IC rules. In particular, operation of radio channels overlapping the band 5600 MHz to 5650 MHz is not allowed and these channels are permanently barred. In addition, other channels may also need to be barred when operating close to weather radar installations. To ensure compliance with FCC rules (KDB 443999: Interim Plans to Approve UNII Devices Operating in the 5470 - 5725 MHz Band with Radar Detection and DFS Capabilities), follow Avoidance of weather radars (USA only) on page 3-24. Other variants of the PTP 700 are available for use in the rest of the world, but these variants are not supplied to the USA or Canada except under strict controls, when they are needed for export and deployment outside the USA or Canada. Page 3 About This User Guide Important regulatory information Renseignements specifiques aux USA et au Canada La Commission FĂŠdĂŠrale des Communications des Etats-Unis (FCC) a demandĂŠ aux fabricants de mettre en Ĺuvre des mĂŠcanismes spĂŠcifiques pour ĂŠviter dâinterfĂŠrer avec des systèmes radar fonctionnant dans la bande 5600 MHz Ă 5650 MHz. Ces mĂŠcanismes doivent ĂŞtre mis en Ĺuvre dans tous les produits capables de fonctionner Ă l'extĂŠrieur dans la bande 5470 MHz Ă 5725 MHz. Les fabricants doivent s'assurer que les produits de radiocommunications ne peuvent pas ĂŞtre configurĂŠs pour fonctionner en dehors des règles de la FCC, en particulier, il ne doit pas ĂŞtre possible de dĂŠsactiver ou modifier les fonctions de protection des radars qui ont ĂŠtĂŠ dĂŠmontrĂŠs de la FCC. Afin de se conformer Ă ces exigences de la FCC, Cambium fournit des variantes du PTP 700 exclusivement pour les Etats-Unis ou au Canada. Ces variantes sont autorisĂŠs Ă fonctionner avec des clĂŠs de licence qui sont conformes aux règles de la FCC / IC. En particulier, le fonctionnement des canaux de radio qui chevauchent la bande 5600-5650 MHz est interdite et ces canaux sont dĂŠfinitivement exclus. EU Declaration of Conformity Hereby, Cambium Networks declares that the Cambium PTP 700 Series Wireless Ethernet Bridge complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www.cambiumnetworks.com/support/ec-doc Application firmware Download the latest PTP 700 Series firmware and install it in the Outdoor Units (ODUs) before deploying the PTP 700 equipment. Instructions for installing firmware are provided in Upgrading software image on page 7-65. Specific expertise and training for professional installers To ensure that the PTP 700 is installed and configured in compliance with the requirements of Industry Canada and the FCC, installers must have the radio engineering skills and training described in this section. This is particularly important when installing and configuring a PTP 700 system for operation in the 5.1 GHz and 5.4 GHz UNII bands. Avoidance of weather radars The installer must be familiar with the requirements in FCC KDB 443999. Essentially, the installer must be able to: Page 4 About This User Guide Important regulatory information ⢠Access the FCC data base of weather radar location and channel frequencies. ⢠Use this information to correctly configure the product (using the GUI) to avoid operation on channels that should be barred according to the guidelines that are contained in the KDB and explained in detail in this user guide. External antennas When using an external connectorized antenna (as compared to the integrated antenna in the Conectorized+Integrated platform variant), the conducted transmit power may need to be reduced to ensure the regulatory limit on transmitter EIRP is not exceeded. The installer must have an understanding of how to compute the effective antenna gain from the actual antenna gain and the feeder cable losses. The range of permissible values for maximum antenna gain and feeder cable losses are included in this user guide together with a sample calculation. The product GUI automatically applies the correct conducted power limit to ensure that it is not possible for the installation to exceed the EIRP limit, when the appropriate values for antenna gain and feeder cable losses are entered into the GUI. Antennas externes Lorsque vous utilisez une version du produit sans antenne intĂŠgrĂŠe, il peut ĂŞtre nĂŠcessaire de rĂŠduire la puissance d'ĂŠmission pour garantir que la limite rĂŠglementaire de puissance isotrope rayonnĂŠe ĂŠquivalente (PIRE) n'est pas dĂŠpassĂŠe. L'installateur doit avoir une bonne comprĂŠhension de la façon de calculer le gain de l'antenne de gain de l'antenne rĂŠelle et les pertes dans les câbles de connections. La plage de valeurs admissibles pour un gain maximal de l'antenne et des pertes de câbles de connections sont inclus dans ce guide d'utilisation avec un exemple de calcul. L'interface utilisateur du produit applique automatiquement la limite de puissance menĂŠe correct afin de s'assurer qu'il ne soit pas possible pour l'installation de dĂŠpasser la limite PIRE, lorsque les valeurs appropriĂŠes pour le gain d'antenne et les pertes de câbles d'alimentation sont entrĂŠes dans lâinterface utilisateur. Ethernet networking skills The installer must have the ability to configure IP addressing on a PC and to set up and control products using a web browser interface. Lightning protection To protect outdoor radio installations from the impact of lightning strikes, the installer must be familiar with the normal procedures for site selection, bonding and grounding. Installation guidelines for the PTP 700 can be found in Chapter 2: System hardware and Chapter 5: Installation. Page 5 About This User Guide Important regulatory information Training The installer needs to have basic competence in radio and IP network installation. The specific requirements applicable to the PTP 700 should be gained by reading Chapter 5: Installation and Chapter 6: Configuration and alignment and by performing sample set ups at base workshop before live deployments. Page 6 About This User Guide Problems and warranty Problems and warranty Reporting problems If any problems are encountered when installing or operating this equipment, follow this procedure to investigate and report: Search this document and the software release notes of supported releases. Visit the support website. Ask for assistance from the Cambium product supplier. Gather information from affected units, such as any available diagnostic downloads. Escalate the problem by emailing or telephoning support. Repair and service If unit failure is suspected, obtain details of the Return Material Authorization (RMA) process from the support website. Hardware warranty Cambiumâs standard hardware warranty is for one (1) year from date of shipment from Cambium Networks or a Cambium distributor. Cambium Networks warrants that hardware will conform to the relevant published specifications and will be free from material defects in material and workmanship under normal use and service. Cambium shall within this time, at its own option, either repair or replace the defective product within thirty (30) days of receipt of the defective product. Repaired or replaced product will be subject to the original warranty period but not less than thirty (30) days. To register PTP products or activate warranties, visit the support website. For warranty assistance, contact the reseller or distributor. Caution Using non-Cambium parts for repair could damage the equipment or void warranty. Contact Cambium for service and repair instructions. Portions of Cambium equipment may be damaged from exposure to electrostatic discharge. Use precautions to prevent damage. Page 7 About This User Guide Security advice Security advice Cambium Networks systems and equipment provide security parameters that can be configured by the operator based on their particular operating environment. Cambium recommends setting and using these parameters following industry recognized security practices. Security aspects to be considered are protecting the confidentiality, integrity, and availability of information and assets. Assets include the ability to communicate, information about the nature of the communications, and information about the parties involved. In certain instances Cambium makes specific recommendations regarding security practices, however the implementation of these recommendations and final responsibility for the security of the system lies with the operator of the system. Page 8 About This User Guide Warnings, cautions, and notes Warnings, cautions, and notes The following describes how warnings and cautions are used in this document and in all documents of the Cambium Networks document set. Warnings Warnings precede instructions that contain potentially hazardous situations. Warnings are used to alert the reader to possible hazards that could cause loss of life or physical injury. A warning has the following format: Warning Warning text and consequence for not following the instructions in the warning. Cautions Cautions precede instructions and are used when there is a possibility of damage to systems, software, or individual items of equipment within a system. However, this damage presents no danger to personnel. A caution has the following format: Caution Caution text and consequence for not following the instructions in the caution. Notes A note means that there is a possibility of an undesirable situation or provides additional information to help the reader understand a topic or concept. A note has the following format: Note Note text. Page 9 About This User Guide Caring for the environment Caring for the environment The following information describes national or regional requirements for the disposal of Cambium Networks supplied equipment and for the approved disposal of surplus packaging. In EU countries The following information is provided to enable regulatory compliance with the European Union (EU) directives identified and any amendments made to these directives when using Cambium equipment in EU countries. Disposal of Cambium equipment European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE) Do not dispose of Cambium equipment in landfill sites. For disposal instructions, refer to http://www.cambiumnetworks.com/support/weee-compliance Disposal of surplus packaging Do not dispose of surplus packaging in landfill sites. In the EU, it is the individual recipientâs responsibility to ensure that packaging materials are collected and recycled according to the requirements of EU environmental law. In non-EU countries In non-EU countries, dispose of Cambium equipment and all surplus packaging in accordance with national and regional regulations. Page 10 Chapter 1: Product description This chapter provides a high level description of products in the PTP 700 series. It describes in general terms the function of the product, the main product variants and the main hardware components. The following topics are described in this chapter: ⢠Overview of the PTP 700 Series on page 1-2 introduces the key features, typical uses, product variants and components of the PTP 700 series. ⢠Wireless operation on page 1-6 describes how the PTP 700 wireless link is operated, including modulation modes, power control and spectrum management. ⢠Ethernet bridging on page 1-21 describes how the PTP 700 controls Ethernet data, in both the customer data and system management networks. ⢠TDM bridging on page 1-34 describes how TDM traffic (E1 or T1) may be carried over PTP 700 links. ⢠System management on page 1-37 introduces the PTP 700 management system, including the web interface, installation, configuration, security, alerts and upgrades. ⢠FIPS 140-2 mode on page 1-54 describes the (optional) FIPS 140-2 approved mode of operation. Page 1-1 Chapter 1: Product description Overview of the PTP 700 Series Overview of the PTP 700 Series This section introduces the key features, typical uses, product variants and components of the PTP 700 series. Purpose Cambium PTP 700 Series Bridge products are designed for Ethernet bridging over point-to-point microwave links in licensed, unlicensed and lightly-licensed frequency bands between 4400 MHz and 5875 MHz. Users must ensure that the PTP 700 Series complies with local operating regulations. The PTP 700 Series acts as a transparent bridge between two segments of the operatorâs network. In this sense, it can be treated as a virtual wired connection between two points. The PTP 700 Series forwards 802.3 Ethernet frames destined for the other part of the network and filters frames it does not need to forward. The system is transparent to higher-level protocols such as VLANs and Spanning Tree. Key features The PTP 700 is a high performance wireless bridge for Ethernet traffic with a maximum throughput of 450 Mbps. It is capable of operating in line-of-sight (LOS), near-LOS and non-LOS propagation condition. Its maximum LOS range is 200 km. The PTP 700 operates in licensed, unlicensed and lightly-licensed frequency bands between 4400 MHz and 5875 MHz. It has a very high spectral efficiency of 10 bps/Hz and supports a channel bandwidth of up to 45 MHz. The PTP 700 Connectorized ODU is designed for use with an external antenna. The PTP 700 Connectorized+Integrated ODU can be used with an external antenna or with an integrated 21 dBi flat plate antenna. The wireless link is TDD based and supports both symmetric and asymmetric TDD configurations. From an Ethernet point-of-view, the PTP 700 wireless link is a transparent Layer 2 bridge. It supports up to three Gigabit Ethernet ports. Two ports support twisted pair Gigabit Ethernet. One of them is capable of providing power via standard 802.3at PoE to an external device such as a video surveillance camera or a wireless access point. The third port accepts either a twisted pair or fibre GE SFP module. The PTP 700 Series supports an optional TDM adaptor that allows E1 or T1 telecoms circuits to be bridged over the wireless link. The PTP 700 Series has extensive quality of service (QoS) classification capability and supports up to eight levels of queues. Management of the unit may be via the same interface as the bridged traffic (in-band management) or on a separate port (out-of-band local or remote management). PTP 700 supports both synchronous Ethernet and operation as an IEEE 1588-2008 transparent clock. Table 1 gives a summary of the main PTP 700 characteristics. Page 1-2 Chapter 1: Product description Overview of the PTP 700 Series Table 1 Main characteristics of the PTP 700 Series Characteristic Value Topology PTP Wireless link condition LOS, near LOS or non-LOS Range Up to 200 km Duplexing TDD (symmetric and asymmetric) Connectivity Ethernet Synchronous Ethernet ITU-T G.8262/Y.1362 EEC-Option 1 and EEC-Option 2 Transparent clock IEEE 1588-2008 compliant Operating frequencies 4400 MHz to 5875 MHz Channel bandwidth 5, 10, 15, 20, 30, 40 or 45 MHz High spectral efficiency Up to 10 bps/Hz Data rate Up to 450 Mbps (45 MHz channel BW) Telecommunications (TDM) Up to eight E1 or T1 circuits (NIDU required) Security FIPS 140-2 Level 2 Frequency bands The PTP 700 ODU can be configured by the user to operate in the following bands: ⢠4.5 GHz band: 4400 to 5000 MHz ⢠4.9 GHz band: 4940 to 4990 MHz ⢠5.1 GHz band: 5150 to 5250 MHz ⢠5.2 GHz band: 5250 to 5350 MHz ⢠5.4 GHz band: 5470 to 5725 MHz ⢠5.8 GHz band: 5725 to 5875 MHz Note The supported frequency coverage may be restricted in some regulatory bands to comply with the applicable regulations. Page 1-3 Chapter 1: Product description Overview of the PTP 700 Series Typical bridge deployment The PTP 700 is an âall outdoorâ solution consisting of a wireless bridge between two sites. Each site installation consists of a PTP 700 Connectorized outdoor unit (ODU) or a PTP 700 Connectorized+Integrated ODU, and a power injector (PSU) (Figure 1). The ODU provides the following interfaces: ⢠PSU port: This provides proprietary power over Ethernet and connection to the management and/or data networks via 100BASE-TX or 1000BASE-T Ethernet. In the basic configuration, this is the only Ethernet connection to the ODU. ⢠SFP port: This provides an optical or copper Gigabit Ethernet interface for customer data and/or network management. ⢠Aux port: This provides an optional power and 100BASE-TX or 1000BASE-T Ethernet connection to an IEEE803.2at device such as a video camera or wireless access point. Figure 1 PTP 700 typical bridge deployment Page 1-4 Chapter 1: Product description Overview of the PTP 700 Series Hardware overview The main hardware components of the PTP 700 are as follows: ⢠Outdoor unit (ODU): The ODU is a self-contained transceiver unit that houses both radio and networking electronics. The PTP 700 ODU is supplied in two configurations: ⢠A PTP 700 Connectorized ODU intended to work with separately mounted external antennas. A PTP 700 Connectorized+Integrated ODU intended to work with either separately mounted external antennas or with an integrated 21 dBi flat plate antenna. The ODU is supplied in the following regional variants: FCC, intended for deployment in the USA and Canada EU, intended for deployment in countries of the European Union or other countries following ETSI regulations Rest of the World (RoW), intended for deployment in countries other than USA and EU countries. ⢠Power supply unit (PSU): The PTP 650/700 AC+DC power injector powers the ODU from an AC or DC supply. ⢠Antennas and antenna cabling: Connectorized ODUs require external antennas connected using RF cable. ⢠PTP SYNC unit (optional): One PTP SYNC unit is needed for each link in a network with TDD synchronization. PTP-SYNC must be used with the AC + DC Enhanced Power Injector. ⢠Network Indoor Unit (NIDU) (optional): The NIDU allows up to eight TDM channels (E1 or T1) to be bridged over a PTP 700 link. ⢠Ethernet cabling: All configurations require a copper Ethernet Cat5e connection from the ODU (PSU port) to the PSU. Advanced configurations may also require one or both of the following: A copper or optical Ethernet connection from the ODU (SFP port) to network terminating equipment or another device. A copper Ethernet Cat5e connection from the ODU (Aux port) to an auxiliary device. ⢠Lightning protection unit (LPU): LPUs are installed in the PSU and Aux copper drop cables to provide transient voltage surge suppression. ⢠Ground cables: ODU, LPUs and outdoor copper Ethernet cables are bonded to the site grounding system using ground cables. For more information about these components, including interfaces, specifications and Cambium part numbers, refer to Chapter 2: System hardware. Page 1-5 Chapter 1: Product description Wireless operation Wireless operation This section describes how the PTP 700 wireless link is operated, including modulation modes, power control and security. Time division duplexing TDD cycle PTP 700 links operate using Time Division Duplexing (TDD). They use a TDD cycle in which the ODUs alternately transmit and receive TDD bursts. The TDD cycle is illustrated in Figure 2. The steps in the cycle are as follows: The TDD master transmits a burst to the TDD slave. A delay occurs as the master-slave burst propagates over the link. The slave receives the burst from the master. The slave processes the master-slave burst. The slave transmits a burst to the master. A delay occurs as the slave-master burst propagates over the link. The master receives the burst from the slave. The master transmits the next burst to the slave. The frame duration must be long enough to allow the master to receive the complete burst in 7 before starting to transmit in 8. TDD frame parameters The TDD burst duration varies depending on the following: ⢠Channel bandwidth ⢠Link range ⢠Link optimization mode ⢠Link symmetry ⢠Offered traffic loading. The TDD frame duration varies depending on the following: ⢠TDD burst duration master-slave. ⢠TDD burst duration slave-master. ⢠Link range. Page 1-6 Chapter 1: Product description Wireless operation The propagation delay in Step 2 is necessarily equal to the propagation delay in Step 6, and is determined solely by the link range. There may be added delays between rx and tx on the master and slave to minimize interference, as set up by the link planner or installer. Figure 2 TDD cycle Channel selection The PTP 700 series links are capable of transmitting and receiving on the same channel or on different channels. In other words, the slave-master direction may use a different channel from the master-slave direction. Independent selection of transmit and receive frequencies can be useful in planned networks or for countering interference. When links operate in radar avoidance regions, each unit monitors its transmit channel for the presence of radar signals. Therefore, the transmit and receive channels are always identical. Page 1-7 Chapter 1: Product description Wireless operation Further reading For information about⌠Refer to⌠TDD synchronization in PTP networks TDD synchronization on page 1-18 Link mode optimization Link mode optimization allows the PTP 700 link to be optimized according to the type of traffic that will be bridged. The link supports two modes, IP Traffic and TDM Traffic. IP traffic IP Traffic mode is optimized to provide the maximum possible link capacity. IP Traffic mode is an appropriate choice where applications in the bridged networks provide some measure of reliable transmission, and where very low latency is not critical. IP mode supports both fixed and adaptive link symmetry. TDM traffic TDM Traffic mode is optimized to provide the lowest possible latency. TDM Traffic mode additionally implements a more conservative approach to adaptive modulation, leading to lower error rates in fading channels at the expense of slightly lower link capacity. TDM Traffic mode is an appropriate choice for delay intolerant data without reliable transmission (for example voice over IP data). TDM Traffic mode is selected automatically when TDM interfaces are enabled. Further reading For information about⌠Refer to⌠Effect of IP and TDM modes on link symmetry Link symmetry on page 1-9 Effect of IP and TDM modes on link data throughput capacity Calculating data rate capacity on page 3-27 Effect of IP and TDM modes on system threshold, output power and link loss System threshold, output power and link loss on page 3-60 How to configure link mode optimization Wireless Configuration page on page 6-21 Link mode optimization alarms Alarms on page 7-17 Data throughput capacity tables on page 3-71 Page 1-8 Chapter 1: Product description Wireless operation Link symmetry The PTP 700 series provides eight configuration options for apportioning the available capacity between the two link directions. ⢠Symmetric â The Master and Slave have equal capacity. The PTP 700 series achieves this by allocating an equal Burst Duration for the Master and the Slave. ⢠5:1 â The capacity in the direction Master to Slave is five times that of the direction Slave to Master. The PTP 700 series achieves this by setting the Burst Duration of the Master to five times that of the Slave ⢠3:1 â The capacity in the direction Master to Slave is three times that of the direction Slave to Master. The PTP 700 series achieves this by setting the Burst Duration of the Master to three times that of the Slave. ⢠2:1 â The capacity in the direction Master to Slave is twice that of the direction Slave to Master. The PTP 700 series achieves this by setting the Burst Duration of the Master to twice that of the Slave. ⢠1:2 â The capacity in the direction Slave to Master is twice that of the direction Master to Slave. The PTP 700 series achieves this by setting the Burst Duration of the Slave to twice that of the Master. ⢠1:3 â The capacity in the direction Slave to Master is three times that of the direction Master to Slave. The PTP 700 series achieves this by setting the Burst Duration of the Slave to three times that of the Master. ⢠1:5 â The capacity in the direction Slave to Master is five times that of the direction Master to Slave. The PTP 700 series achieves this by setting the Burst Duration of the Slave to five times that of the Master. ⢠Adaptive â This is only available on the Full license. The capacity allocated to a given link direction is dependent on the offered level of network traffic in both link directions. If the level of offered traffic in both directions is equally high or equally low, the PTP 700 will allocate equal capacity to both directions. If however the offered level of traffic is greater in one direction, it is allocated a greater proportion of the overall link capacity. The PTP 700 series achieves this by increasing (or decreasing) the duration of the Transmit Burst in a given link direction as the offered level of network traffic increases (or decreases) in this same direction. This is done independently for the two directions. Note The 5:1, 3:1, 2:1, 1:2, 1:3 and 1:5 modes are not available when TDD synchronization is enabled, or when TDM services are enabled. Note Adaptive mode is not available in the following configurations: ⢠When link mode optimization is set to TDM Traffic (see Link mode optimization on page 1-8). ⢠When TDD synchronization is enabled. Page 1-9 Chapter 1: Product description Wireless operation ⢠In regions where radar avoidance is operational (see Radar avoidance on page 1-14). ⢠When the ODU is not on a Full license. Further reading For information about⌠Refer to⌠Link symmetry in synchronized networks TDD synchronization on page 1-18 Effect of link symmetry on link data throughput capacity Calculating data rate capacity on page 3-27 How to configure link symmetry Wireless Configuration page on page 6-21 Data throughput capacity tables on page 3-71 Further reading For information about⌠Refer to⌠Link range capability upgrade Capability upgrades on page 1-52 Effect of link range on data throughput capacity Calculating data rate capacity on page 3-27 How to generate a license key for maximum link range Generating license keys on page 6-3 How to configure link ranging Wireless Configuration page on page 6-21 Automatic detection of link range ODU installation tones on page 6-111 Data throughput capacity tables on page 3-71 OFDM and channel bandwidth The PTP 700 series transmits using Orthogonal Frequency Division Multiplexing (OFDM). This wideband signal consists of many equally spaced sub-carriers. Although each sub carrier is modulated at a low rate using conventional modulation schemes, the resultant data rate from the sub-carriers is high. OFDM works exceptionally over a Non-Line-of-Sight (NLoS) channel. The channel bandwidth of the OFDM signal is configurable to one of the following values: 5, 10, 15, 20, 30, 40 and 45 MHz. Higher bandwidths provide greater link capacity at the expense of using more bandwidth. Systems configured for a narrower channel bandwidth provide better receiver sensitivity and can also be an appropriate choice in deployments where the amount of free spectrum is limited. Each channel is offset in center frequency from its neighboring channel by 10 or 5 MHz. Page 1-10 Chapter 1: Product description Wireless operation Note The Channel Bandwidth must be configured to the same value at both ends of the link. Not all channel bandwidths are available in all regulatory bands. Further reading For information about⌠Refer to⌠Channel bandwidths per frequency band General wireless specifications on page 3-21 How to plan for channel bandwidth Channel bandwidth on page 3-23 Effect of channel bandwidth on link data throughput capacity Calculating data rate capacity on page 3-27 How to configure channel bandwidth Wireless Configuration page on page 6-21 How to monitor channel bandwidth Spectrum Management on page 7-26 Data throughput capacity tables on page 3-71 Spectrum management The spectrum management feature of the PTP 700 Series monitors the available wireless spectrum and directs both ends of the wireless link to operate on a channel with a minimum level of cochannel and adjacent channel interference. Spectrum management measurements The PTP 700 Series performs two mean signal measurements per TDD cycle, per channel. This mean measurement represents the mean received signal power for the 40 microsecond measurement period. The Spectrum Management algorithm collects measurements equally from all channels in the operating band. This process is called the Channel Availability Check (CAC). The CAC uses a round-robin channel selection process to collect an equal amount of measurements from each channel. The CAC measurement process is not altered by the channel barring process. Measurements are still collected for all channels irrespective of the number of barred channels. Measurement analysis Spectrum Management uses statistical analysis to process the received peak and mean measurement. The statistical analysis is based on a fixed, one minute, measurement quantization period. Spectrum Management collects data for the specified quantization period and only at the end of the period is the statistical analysis performed. Page 1-11 Chapter 1: Product description Wireless operation Statistical summary The display of statistical measurement on the Spectrum Expert page always shows a statistical summary of all channel measurement. The mean and percentile values displayed for each channel are calculated over a 20 minute statistics window period. All channel decisions are made using the values computed over the statistics window period. Spectrum management in fixed frequency mode The transmit and receive frequencies can be fixed in a PTP 700 wireless link. Once fixed frequency mode is configured, the spectrum management software will not attempt to move the wireless link to a channel with lower co-channel and adjacent-channel interference. Therefore this mode of operation is only recommended for deployments where the installer has a good understanding of the prevailing interference environment. Care must also be taken to ensure that the frequency allocations at each end of the link are compatible. Fixed frequency mode is not available in regions where radar detection is required by the regulations. Further reading For information about⌠Refer to⌠How to perform spectrum management Spectrum Management on page 7-26 Adaptive modulation The PTP 700 series can transport data over the wireless link using a number of different modulation modes ranging from 256QAM 0.81 to BPSK 0.63. For a given channel bandwidth and TDD frame structure, each modulation mode transports data at a fixed rate. Also, the receiver requires a minimum signal to noise ratio in order to successfully demodulate a given modulation mode. Although the more complex modulations such as 256QAM 0.81 will transport data at a much higher rate than the less complex modulation modes, the receiver requires a much higher signal to noise ratio. The PTP 700 series provides an adaptive modulation scheme where the receiver constantly monitors the quality of the received signal and notifies the far end of the link of the optimum modulation mode with which to transmit. In this way, optimum capacity is achieved at all times. This is one of a number of features which allows the PTP 700 to operate in challenging non-line of sight radio channels. Note LINKPlanner includes an estimate of mean data rate, the data rate provided by each modulation and the percentage of time spent in each modulation mode. Page 1-12 Chapter 1: Product description Wireless operation Further reading For information about⌠Refer to⌠Lowest data modulation mode Lowest Data Modulation Mode on page 1-25 Lowest TDM modulation mode Lowest TDM modulation mode on page 1-35 Planning for adaptive modulation Adaptive modulation on page 3-26 Effect of modulation mode on link data throughput capacity Calculating data rate capacity on page 3-27 Effect of modulation mode on system threshold, output power and link loss System threshold, output power and link loss on page 3-60 How to configure modulation modes Interface Configuration page on page 6-14 Data throughput capacity tables on page 3-71 Wireless Configuration page on page 6-21 System Configuration page on page 6-30 Modulation mode when the ODU is armed Checking that the units are armed on page 6-108 How to view the transmit and receive modulation modes System Status page on page 7-3 System counters on page 7-49 MIMO Multiple-Input Multiple-Output (MIMO) techniques provide protection against fading and increase the probability that the receiver will decode a usable signal. When the effects of MIMO are combined with those of OFDM techniques and a high link budget, there is a high probability of a robust connection over a non-line-of-sight path. The PTP 700 transmits two signals on the same radio frequency, one of which is vertically polarized and the other horizontally polarized. Depending on the channel conditions, the PTP 700 will adapt between two modes of operation: ⢠Dual Payload: When the radio channel conditions allow, the PTP 700 will transmit two different and parallel data streams, one on the vertical channel and one on the horizontal channel. This doubles the capacity of the PTP 700. ⢠Single Payload: As the radio channel becomes more challenging, the PTP 700 has the ability to detect this and switch to a mode which transmits the same data stream on both vertical and horizontal channels. This provides polar diversity and is another key feature which allows the PTP 700 to operate in challenging non- line of sight radio channels. Lower order modulations (BPSK 0.63 up to QPSK 0.87) only operate in single payload mode. Higher order modulations (16QAM 0.63 to 256QAM 0.81) are available in single payload mode and dual payload mode. The switching between modes is automatically controlled by the adaptive modulation feature described in Adaptive modulation on page 1-12. Page 1-13 Chapter 1: Product description Wireless operation Note The system automatically chooses between dual and single payload to try to increase the capacity of a link. However the user can disable the dual payload mode, forcing the more robust option of single payload. Further reading For information about⌠Refer to⌠How to configure dual or single payload Wireless Configuration page on page 6-21 Single and dual payload modulation modes System threshold, output power and link loss on page 3-60 TDM single payload lock feature TDM on page 7-13 Dynamic spectrum optimization The PTP 700 series uses an interference mitigation technique known as Dynamic Spectrum Optimization (DSO). Both the Master and Slave continually monitor for interference on all channels and then select the best frequency of operation. This is a dynamic process where the PTP 700 can continually move channels in response to changes in interference. Two modes of operation are available: ⢠First mode: the two link directions are forced to select the same frequency, determined by the Master. ⢠Second mode: the frequency of operation can be determined independently for each direction. This mode is not permitted in radar regions. Further reading For information about⌠Refer to⌠Using DSO in PTP networks Using Dynamic Spectrum Optimization on page 1-17 Planning to use DSO Frequency selection on page 3-23 How to configure DSO Wireless Configuration page on page 6-21 Asymmetric DSO in non-radar regions Spectrum Management Settings on page 7-31 Radar avoidance In regions where protection of radars is part of the local regulations, the PTP 700 must detect interference from radar-like systems and avoid co-channel operation with these systems. Page 1-14 Chapter 1: Product description Wireless operation To meet this requirement, the PTP 700 implements the following features: ⢠The radar detection algorithm will always scan a usable channel for 60 seconds for radar interference before making the channel an available channel. ⢠This compulsory channel scan will mean that there is at least 60 seconds service outage every time radar is detected and that the installation time is extended by at least 60 seconds even if no radar is found. ⢠When operating on a channel, the spectrum management algorithm implements a radar detection function which looks for impulsive interference on the operating channel. If impulsive interference is detected, spectrum management will mark the current operating channel as having detected radar (unavailable channel) and initiate a channel hop to an available channel. The previous operating channel will remain in the unavailable state for thirty minutes after the impulsive interference pulse was detected. ⢠After the thirty minutes have expired the channel will be returned to the usable channel pool. There is a secondary requirement for bands requiring radar avoidance. Regulators have mandated that products provide a uniform loading of the spectrum across all devices. In general, this prevents operation with fixed frequency allocations. However: ⢠ETSI regulations do allow frequency planning of networks (as that has the same effect of spreading the load across the spectrum). ⢠The FCC does allow channels to be barred if there is actually interference on them. Fixed frequency allocation is not recommended in radar avoidance regions, as any radar detection would cause a system outage of at least 30 minutes. Further reading For information about⌠Refer to⌠Radar avoidance in the country of operation License keys and regulatory bands on page 1-16 Planning for mandatory radar detection Frequency selection on page 3-23 Radar avoidance when aligning antennas ODU installation tones on page 6-111 Effect of radar detection on spectrum management Spectrum Expert page in radar avoidance mode on page 7-37 Encryption The PTP 700 supports optional encryption for data transmitted over the wireless link. The encryption algorithm used is the Advanced Encryption Standard (AES) with 128-bit and 256-bit key size. AES is a symmetric encryption algorithm approved by U.S. Government organizations (and others) to protect sensitive information. The AES implementation in PTP 700 is approved to FIPS197. Encryption is enabled through the purchase of an upgrade. Page 1-15 Chapter 1: Product description Wireless operation Further reading For information about⌠Refer to⌠AES requirement for HTTPS/TLS Transport layer security on page 1-42 AES requirement for SNMPv3 security User-based security model on page 1-46 Licensing AES encryption AES license on page 1-49 Capability upgrades on page 1-52 Planning to use AES for HTTPS/TLS Planning for HTTPS/TLS operation on page 3-51 How to generate AES license keys Generating license keys on page 6-3 How to configure AES encryption System Configuration page on page 6-30 How to configure AES encryption for HTTPS/TLS operation Security menu on page 6-93 License keys and regulatory bands The PTP 700 license key specifies the country of operation for the ODU, and lists the regulatory bands that are licensed by regulators in that country. If a license key provides access to more than one regulatory band, PTP 700 provides a choice between the available bands. In each regulatory band, PTP 700 sets the following aspects of wireless operation to comply with the applicable regulations: ⢠Maximum transmit power ⢠Radar avoidance ⢠Transmit power reduction in edge channels ⢠Frequency range ⢠Channel plan The country of operation (and thus the supported regulatory bands) can be changed by generating a new license key at the License Key Generator page of the Cambium web-site, and entering the new license key using the Installation Wizard. Caution To avoid possible enforcement action by the country regulator, always operate links in accordance with local regulations. Attention Pour ĂŠviter une ĂŠventuelle sanction par le rĂŠgulateur du pays, utiliser toujours nos liaisons radiofrĂŠquences conformĂŠment Ă la rĂŠglementation locale. Page 1-16 Chapter 1: Product description Wireless operation Further reading For information about⌠Refer to⌠Planning PTP 700 links to conform to the regulatory band restrictions Radio spectrum planning on page 3-21 Radio regulations in the country of operation Compliance with radio regulations on page 4-28 How to generate a license key for the country of operation Generating license keys on page 6-3 How to configure the regulatory band Wireless Configuration page on page 6-21 How to view the regulatory band System Status page on page 7-3 Regulatory band alarms Alarms on page 7-17 PTP networks Using Dynamic Spectrum Optimization The Dynamic Spectrum Optimization (DSO) feature allows a PTP 700 unit to select wireless channels for a lower level of radio frequency (RF) interference. This approach is appropriate where the network consists of a small number of PTP links, or where the RF interference is predominantly from equipment belonging to other operators. Using frequency planning Networks will benefit from the use of fixed channel allocations if (a) the network consists of multiple PTP links, and (b) RF interference predominantly arises from equipment in the same network. Frequency planning is the exercise of assigning operating channels to PTP units so as to minimize RF interference between links. Frequency planning must consider interference from any PTP unit to any other PTP unit in the network. Low levels of interference normally allow for stable operation and high link capacity. The frequency planning task is made more straightforward by use of the following techniques: ⢠Using several different channels ⢠Separating units located on the same mast ⢠Using high performance (directional) external antennas Synchronized networks TDD synchronization can be used to relax constraints on the frequency planning of PTP networks. Synchronization has the following benefits: Page 1-17 Chapter 1: Product description Wireless operation ⢠Allows tighter frequency re-use, and thus wider channel bandwidth. ⢠Allows more convenient collocation of units on a single mast. ⢠Allows use of smaller or lower performance antennas. ⢠Reduces inference, resulting in use of more efficient modulation modes. In a correctly designed synchronised network, all links are configured with the same TDD frame duration, and the TDD frame contains guard periods longer than the propagation delay between the most distant interfering units. Each synchronized unit is assigned to one of two phases. A master ODU can be assigned to either phase. A slave ODU must be assigned to a different phase from the associated master ODU. The phase is set by suitable configuration of TDD Frame Offset. TDD synchronization eliminates RF interference between units in the same phase. This means that frequency planning in a synchronized network is concerned only with interference between units in different phases. Frequency planning is still necessary, but the number of potential interference paths to be considered is halved. Frequency planning in a synchronized TDD network has approximately the same level of complexity as frequency planning in a Frequency Division Duplex (FDD) network. Further reading For information about⌠Refer to⌠How to plan networks Chapter 3: System planning, or contact your Cambium distributor or re-seller. TDD synchronization (PTP-SYNC) Additional hardware is needed to synchronize PTP 700 links. One PTP-SYNC unit is required for each master ODU. The PTP-SYNC unit is connected in line in the drop cable between the PSU and the ODU, and is collocated with the PSU. Caution The PTP-SYNC is compatible only with the PTP 650/700 AC + DC Power Injector. The PTP 650 AC Power Injector will not work with a PTP-SYNC, and it is likely that a fuse will be blown in the PTP-SYNC if this is attempted. Timing references for use with PTP-SYNC PTP-SYNC requires an external timing reference in all but the simplest networks. Up to ten PTP-SYNCs can be connected in a chain to share the timing signal from one timing reference. In the majority of applications, one reference is required for each site that contains PTP 700 master ODUs. Page 1-18 Chapter 1: Product description Wireless operation The timing reference can be from any timing system that provides a 1 Hz signal, accurately synchronized in frequency and phase with a network-wide master timing reference. GPS timing receivers are a very practical way of obtaining a suitable reference. The PTP-SYNC is compatible with the Trimble Acutime⢠GG and Trimble Acutime⢠Gold GPS receivers. In simple networks where all master ODUs are at a single site, the external reference can be omitted. In this case, one ODU acts as a reference for other collocated units. Configuring the TDD frame In synchronized operation, frame duration and burst duration must be configured directly in the web-based management interface. Frame duration must be identical across all links in a synchronized network. The PTP Link Planner provides a capability for computing suitable frame parameters in a synchronized network. Please refer to the Link Planner User Guide for guidance on configuring TDD synchronization. Link symmetry is always 1:1 in synchronized networks. Link capacity in synchronized networks The TDD frame duration is extended in synchronized networks to allow for the propagation delay of the longest link in the network and to incorporate additional guard periods. These guard periods protect against delayed interference from distant units in the same network. The longer frame duration results in slightly lower link capacity than for an equivalent nonsynchronized link with the same channel bandwidth and modulation mode. However, TDD synchronization also reduces interference, and this may allow operation in higher modulation modes. The benefit of operating in a higher modulation mode normally outweighs the penalty of the slightly longer TDD frame. Further reading For information about⌠Refer to⌠The PTP-SYNC unit PTP-SYNC unit on page 2-44 The GPS receiver GPS receiver on page 2-50 Typical deployment diagrams for GPS GPS receiver interfaces on page 3-9 Choosing a site for the PTP-SYNC unit PTP-SYNC location on page 3-16 Choosing a site for the GPS receiver GPS receiver location on page 3-16 Use of LINKPlanner for TDD synchronization LINKPlanner for synchronized networks on page 3-26 TDD synchronization methods that may be implemented using PTP-SYNC Configuration options for TDD synchronization on page 3-31 How to install a PTP-SYNC unit Installing a PTP-SYNC unit on page 5-26 Page 1-19 Chapter 1: Product description Wireless operation For information about⌠Refer to⌠How to install an optional GPS receiver Installing a GPS receiver on page 5-30 How to enable TDD synchronization Wireless Configuration page on page 6-21 How to configure TDD synchronization TDD synchronization page (optional) on page 627 How to view TDD synchronization status System Status page on page 7-3 TDD synchronization alarms Alarms on page 7-17 How to test a PTP-SYNC installation when a fault is suspected Testing PTP-SYNC on page 8-15 Page 1-20 Chapter 1: Product description Ethernet bridging Ethernet bridging This section describes how the PTP 700 processes Ethernet data, and how Ethernet ports are allocated to the Data Service, Second Data Service, Management Service and Local Management Service. Ethernet ports The PTP 700 Series ODU has three Ethernet ports: ⢠Main PSU: The Main PSU port provides a copper Ethernet interface for 100BASE-TX and 1000BASE-T, and accepts power from the AC+DC Enhanced Power Injector to the ODU using a proprietary power over Ethernet (PoE) method. ⢠Aux: The Aux port provides a copper Ethernet interface for 100BASE-TX and 1000BASE-T, and supplies power from the ODU to external equipment using standards-based power over Ethernet (PoE) complying with IEEE 802.3at. ⢠SFP: The SFP port is a small format pluggable receptacle accepting copper or optical plug-in modules supplied as part of the SFP module kit. Note The PTP 700 provides flexible interconnection of customer data and network management using several Ethernet ports, but it does not contain a general-purpose Ethernet switch, and it is not possible to forward traffic between the Ethernet ports of the same ODU. Data and management services The PTP 700 Series ODU supports four different types of virtual circuits providing data and management services. Data Service This point-to-point transparent service carries customerâs data between one of the Ethernet ports at the local ODU and one of the Ethernet ports at an associated remote ODU. Every link is configured with exactly one instance of the Data Service. The Data Service provides comprehensive Quality of Service classification with up to eight queues. Page 1-21 Chapter 1: Product description Ethernet bridging Second Data Service This optional point-to-point transparent service offers a second virtual circuit for customerâs data between one of the Ethernet ports at the local ODU and one of the Ethernet ports at an associated remote ODU. The Data Service and Second Data Service are always mapped to different ports at an ODU. The Data traffic of the two services are distinct and are separately bridged to the appropriate configured remote ODU port. The Second Data Service is available only with a Full capacity license. The Second Data Service provides a single class of service, which can be configured to match any of the eight classes of the Data Service. Management Service PTP 700 provides options for In-Band and Out-of-Band network management. The In-Band Management Service connects management systems at both ends of the link with the embedded management agents in the ODUs, accessed using the Ethernet ports selected to the Data Service or the Second Data Service. The Out-of-Band Management Service connects management systems at both ends of the link with the embedded management agents in the ODUs, accessed using dedicated Ethernet ports. Note Out-of-Band Management is not available when the optional Second Data Service is enabled. The Out-of-Band Management Service provides a single class of service, which can be configured to match any of the eight classes of the Data Service. Note The PTP 700 provides flexible interconnection of customer data and network management using several Ethernet ports, but it does not contain a general-purpose Ethernet switch, and it is not possible to forward traffic between the Ethernet ports of the same ODU. Local Management Service PTP 700 provides option for local network management. The Local Management network is isolated from the customer data network. Management frames are not forwarded over the wireless link. The management agents can access only through the OOB Local ports at the respective ODUs. Page 1-22 Chapter 1: Product description Ethernet bridging Further reading For information about⌠Refer to⌠A more detailed description of the Data Service Data Service on page 1-21 A more detailed description of the Second Data Service Second Data Service on page 1-22 A more detailed description of the Outof-Band Management Service Management Service on page 1-22 SFP optical or copper module kits SFP module kits on page 2-41 The PSU, AUX and SFP ports of the ODU ODU interfaces on page 2-12 Diagrams showing Ethernet connections Typical deployment on page 3-2 How to plan the use of Ethernet ports for customer and management traffic Ethernet interfaces on page 3-35 How to install the Ethernet interfaces to the ODU Installing the copper Cat5e Ethernet interface on page 5-16 Installing an SFP Ethernet interface on page 5-26 Installing an Aux Ethernet interface on page 5-55 How to configure the ODU Ethernet ports Interface Configuration page on page 6-14 Ethernet port status attributes Ethernet / Internet on page 7-6 Ethernet port alarms Alarms on page 7-17 LAN Configuration page on page 6-34 Data network Transparent Ethernet service The PTP 700 Series provides an Ethernet service between one of the Ethernet ports at a local ODU and one of the Ethernet ports at an associated remote ODU. The Ethernet service is based on conventional layer two transparent bridging, and is equivalent to the Ethernet Private Line (EPL) service defined by the Metro Ethernet Forum (MEF). The service is transparent to untagged frames, standard VLAN frames, priority-tagged frames, provider bridged frames, Q-in-Q frames and provider backbone bridged frames. In each case, the service preserves MAC addresses, VLAN ID, Ethernet priority and Ethernet payload in the forwarded frame. The maximum frame size for bridged frames in the customer network is 9600 bytes. Page 1-23 Chapter 1: Product description Ethernet bridging There is no requirement for the customer data network to be connected to the same Ethernet port at both ends of a wireless link. For example, it is possible to connect the Main PSU port to the customer data network at one end of the link and to connect the Aux port to the customer data network at the other end of the link. Layer two control protocols The Data Service in the PTP 700 Series is transparent to layer two control protocols (L2CP) including: ⢠Spanning tree protocol (STP), rapid spanning tree protocol (RSTP) ⢠Multiple spanning tree protocol (MSTP) ⢠Link aggregation control protocol (LACP) ⢠Link OAM, IEEE 802.3ah ⢠Port authentication, IEEE 802.1X ⢠Ethernet local management interface (E-LMI), ITU-T Q.933. ⢠Link layer discovery protocol (LLDP) ⢠Multiple registration protocol (MRP) ⢠Generic attribute registration protocol (GARP) The PTP 700 Series does not generate or respond to any L2CP traffic. Quality of service for bridged Ethernet traffic The PTP 700 Series supports eight traffic queues in the Data Service for Ethernet frames waiting for transmission over the wireless link. Ethernet frames are classified by inspection of the Ethernet priority code point in the outermost VLAN tag, the Differentiated Services Code Point (DSCP) in an IPv4 or IPv6 header including DSCP in an IPv4 or IPv6 datagrams encapsulated in PPP and PPPoE headers, or the Traffic Class in an MPLS header. PTP 700 provides a configurable mapping between Ethernet, IP or MPLS priority and transmission queue, together with a simple way to restore a default mapping based on the recommended default in IEEE 802.1Q-2005. Untagged frames, or frames with an unknown network layer protocol, can be separately classified. Scheduling for transmission over the wireless link is by strict priority. In other words, a frame at the head of a given queue is transmitted only when all higher priority queues are empty. Fragmentation The PTP 700 Series minimizes latency and jitter for high-priority Ethernet traffic by fragmenting Ethernet frames before transmission over the wireless link. The fragment size is selected automatically according to channel bandwidth and modulation mode of the wireless link. Fragments are reassembled on reception, and incomplete Ethernet frames are discarded. Page 1-24 Chapter 1: Product description Ethernet bridging Data port wireless link down alert The PTP 700 Series provides an optional indication of failure of the wireless link by means of a brief disconnection of the copper or optical data port allocated to the customer data network. The Wireless link down alert can be used to trigger protection switching by Spanning Tree Protocol (STP) or Ethernet Automatic Protection Switching (EAPS) and other higher layer protocols in a redundant network. Lowest Data Modulation Mode The PTP 700 ODU can be configured to discard Ethernet frames in the Data Service when the modulation mode is lower than the configured Lowest Data Modulation Mode. This feature is likely to be useful in networks that have alternate routes, for example in a ring or mesh topology where EAPS or RSTP is used to resolve loops. In this application, Lowest Data Modulation Mode should be set to ensure that an active link will provide at least the minimum necessary capacity for high-priority constant bit rate traffic such as voice over IP or TDM pseudo wire. An active link will be blocked when the capacity falls below the minimum required, triggering a routing change in associated Ethernet switches to bring alternate links into use. Lowest Data Modulation Mode should normally be set to BPSK 0.63 Single in simply connected tree networks or other topologies that do not have alternative routes. Further reading For information about⌠Refer to⌠Factors to be considered when planning PTP 700 customer data networks Data network planning on page 3-35 How to configure the Ethernet service LAN Configuration page on page 6-34 How to configure Ethernet quality of service QoS Configuration page on page 6-44 How to monitor Ethernet performance System statistics on page 7-47 Second Data network Transparent Ethernet service The PTP 700 Series provides an optional second Ethernet data service between one of the Ethernet ports at a local ODU and one of the Ethernet ports at an associated remote ODU. The Ethernet service is based on conventional layer two transparent bridging. The PTP 700 maintains complete separation between Ethernet traffic in the data service and the second data service. Page 1-25 Chapter 1: Product description Ethernet bridging The service is transparent to untagged frames, standard VLAN frames, priority-tagged frames, provider bridged frames, Q-in-Q frames and provider backbone bridged frames. In each case, the service preserves MAC addresses, VLAN ID, Ethernet priority and Ethernet payload in the forwarded frame. The maximum frame size for bridged frames in the second data service is 2000 bytes. There is no requirement for the second data service to be connected to the same Ethernet port at both ends of a wireless link. For example, it is possible to connect the Main PSU port to the second data service at one end of the link and to connect the Aux port to the second data service at the other end of the link. Layer two control protocols The Second Data Service in the PTP 700 Series is transparent to layer two control protocols (L2CP) including: ⢠Spanning tree protocol (STP), rapid spanning tree protocol (RSTP) ⢠Multiple spanning tree protocol (MSTP) ⢠Link aggregation control protocol (LACP) ⢠Link OAM, IEEE 802.3ah ⢠Port authentication, IEEE 802.1X ⢠Ethernet local management interface (E-LMI), ITU-T Q.933. ⢠Link layer discovery protocol (LLDP) ⢠Multiple registration protocol (MRP) ⢠Generic attribute registration protocol (GARP) The management service in the PTP 700 Series does not generate or respond to any L2CP traffic. Quality of service for bridged Ethernet traffic The PTP 700 Series supports a single traffic queue in the Second Data Service for Ethernet frames waiting for transmission over the wireless link. The priority of the queue can be varied with respect to the eight queues used for the data service. Fragmentation Ethernet frames in the PTP 700 Series Second Data Service are always fragmented for transmission over the wireless link, even when the single queue for the Second Data Service has higher priority than all of the data service queues. Second Data port wireless link down alert The PTP 700 Series provides an optional indication of failure of the wireless link by means of a brief disconnection of the copper or optical data port allocated to the Second Data Service. The Wireless link down alert can be used to trigger protection switching by Spanning Tree Protocol (STP) or Ethernet Automatic Protection Switching (EAPS) and other higher layer protocols in a redundant network. Page 1-26 Chapter 1: Product description Ethernet bridging Lowest Second Data Modulation Mode The PTP 700 ODU can be configured to discard Ethernet frames in the Second Data Service when the modulation mode is lower than the configured Lowest Second Data Modulation Mode. This feature is likely to be useful in networks that have alternate routes, for example in a ring or mesh topology where EAPS or RSTP is used to resolve loops. In this application, Lowest Second Data Modulation Mode should be set to ensure that an active link will provide at least the minimum necessary capacity for high-priority constant bit rate traffic such as voice over IP or TDM pseudo wire. An active link will be blocked when the capacity falls below the minimum required, triggering a routing change in associated Ethernet switches to bring alternate links into use. Lowest Second Data Modulation Mode should normally be set to BPSK 0.63 Single in simply connected tree networks or other topologies that do not have alternative routes. Further reading For information about⌠Refer to⌠Factors to be considered when planning PTP 700 customer data networks Data network planning on page 3-35 How to configure the Ethernet Second Data Service LAN Configuration page on page 6-34 How to configure Ethernet quality of service QoS Configuration page on page 6-44 How to monitor Ethernet performance System statistics on page 7-47 Out-of-Band Management Service Transparent Ethernet service The PTP 700 Series provides an optional Ethernet service for out-of-band network management between one of the Ethernet ports at a local ODU and one of the Ethernet ports at an associated remote ODU. The Ethernet service is based on conventional layer two transparent bridging. The PTP 700 maintains complete separation between Ethernet traffic in the customer Data Service and the Management Service. The service is transparent to untagged frames, standard VLAN frames, priority-tagged frames, provider bridged frames, Q-in-Q frames and provider backbone bridged frames. In each case, the service preserves MAC addresses, VLAN ID, Ethernet priority and Ethernet payload in the forwarded frame. The maximum frame size for bridged frames in the management network is 2000 bytes. There is no requirement for the management network to be connected to the same Ethernet port at both ends of a wireless link. For example, it is possible to connect the Main PSU port to the management network at one end of the link and to connect the Aux port to the management network at the other end of the link. Page 1-27 Chapter 1: Product description Ethernet bridging Layer two control protocols The Management Service in the PTP 700 Series is transparent to layer two control protocols (L2CP) including: ⢠Spanning tree protocol (STP), rapid spanning tree protocol (RSTP) ⢠Multiple spanning tree protocol (MSTP) ⢠Link aggregation control protocol (LACP) ⢠Link OAM, IEEE 802.3ah ⢠Port authentication, IEEE 802.1X ⢠Ethernet local management interface (E-LMI), ITU-T Q.933. ⢠Link layer discovery protocol (LLDP) ⢠Multiple registration protocol (MRP) ⢠Generic attribute registration protocol (GARP) The management service in the PTP 700 Series does not generate or respond to any L2CP traffic. Quality of service for bridged Ethernet traffic The PTP 700 Series supports a single traffic queue in the Management Service for Ethernet frames waiting for transmission over the wireless link. The priority of the queue can be varied with respect to the eight queues used for the Data Service. Fragmentation Ethernet frames in the PTP 700 Series management service are always fragmented for transmission over the wireless link, even when the single queue for the management service has higher priority than all of the customer data queues. Management port wireless Down Alert The PTP 700 Series provides an optional indication of failure of the wireless link by means of a brief disconnection of the copper or optical data port allocated to the management network. The Wireless link down alert can be used to trigger protection switching by Spanning Tree Protocol (STP) or Ethernet Automatic Protection Switching (EAPS) and other higher layer protocols in a redundant network. Lowest Data Modulation Mode The Lowest Data Modulation Mode attribute does not prevent bridging in the management service. See Lowest Data Modulation Mode on page 1-25. Page 1-28 Chapter 1: Product description Ethernet bridging Further reading For information about⌠Refer to⌠Factors to be considered when planning PTP 700 management data networks Data network planning on page 3-35 How to configure the Ethernet service LAN Configuration page on page 6-34 How to configure Ethernet quality of service QoS Configuration page on page 6-44 How to monitor Ethernet performance System statistics on page 7-47 Ethernet loopback mode PTP 700 provides a local Ethernet loopback function that can be used to loop traffic between the Aux Port and one of the other Ethernet ports. Loopback is intended to assist in the commissioning of a camera or other auxiliary device collocated with the PTP 700 ODU. For example, when setting up a camera which will ultimately be connected to the wireless bridge, it may be useful to loop the data back to a second local interface, to assist in the positioning and alignment of the camera. When ports are configured for Ethernet local loopback, they are temporarily disconnected from their allocated function and connected together internally within the PTP 700 ODU. The Management Service and Local Management Service are disconnected from a port configured for loopback. In this case, it will not be possible to manage the ODU from a local Ethernet port. For this reason the Ethernet loopback is always disabled when the ODU is rebooted or power-cycled, restoring the previous port configuration and any associated management paths. During loopback operation, the same frame size restrictions that apply to management traffic are present, jumbo frames are not supported and the maximum frame size is restricted to 1536 bytes. Loopback is able to loop between Ethernet ports operating at different line rates if required, and it is possible to configure a Loopback between ports operating at 1000BASE-T/LX/SX and 100BASE-TX if needed. Further reading For information about⌠Refer to⌠How to configure Ethernet loopback LAN Configuration page on page 6-34 Page 1-29 Chapter 1: Product description Ethernet bridging Protocol model Ethernet bridging behavior at each end of the wireless link is equivalent to a two-port, managed, transparent MAC bridge where the two ports are a wired Ethernet port allocated to the Data Service, Second Data Service, Out-of-Band Management Service, and the Wireless port. Frames are transmitted at the Wireless port over a proprietary point-to-point circuit-mode link layer between ends of the PTP 700 link. The Wireless Port provides two distinct service access ports (SAPs) where the first is always used for the Data Service, while the second is used by either the Second Data Service or Out-of-Band Management Service. Ethernet frames received at the Ethernet ports, or generated internally within the management agent, are encapsulated within a lightweight MAC layer for transmission over the wireless link. Protocol layers involved in bridging between Ethernet and wireless interfaces are shown in Figure 3. Protocol layers involved in bridging between external interfaces and the management agent are shown in Figure 4. In these figures, the layers have the meanings defined in IEEE 802.1Q-2005. Figure 3 Protocol layers between Ethernet and wireless interfaces Ethernet Port Wireless Port Media Access Method Independent Functions MAC Relay Entity Media Access Method Dependent Convergence Functions PTP Medium Access Method IEEE 802.3 PTP Security (Optional) PTP Physical Layer Ethernet Wireless D-SAP = Data Service Access Point 2D-SAP = Second Data Service Access Point M-SAP = Management Service Access Point Page 1-30 Media Access Method Specific Functions Chapter 1: Product description Ethernet bridging Figure 4 Protocol layers between external interfaces and the management agent Management Agent HTTP/SNMP/SMTP TCP/IP Management, Wireless, Data Ports MAC Relay Entity Media Access Method Specific Functions Further reading For information about⌠Refer to⌠Layer two control protocols (L2CPs) identified by PTP 700 Layer two control protocols on page 3-35 Synchronous Ethernet PTP 700 provides a Synchronous Ethernet function. When enabled, the frequency and phase of the Ethernet clock is transferred to the other end of the radio link, enabling operation as part of an ITU-T G.781 Synchronous Digital Hierarchy. Synchronisation Status Messages (SSM) are processed and transmitted as specified by ITU-T G.8264 and in Section 5 of G.781. Page 1-31 Chapter 1: Product description Ethernet bridging Further reading For information about⌠Refer to⌠Relationship between synchronous Ethernet and TDM TDM description on page 1-34 Availability of synchronous Ethernet Capability upgrades on page 1-52 Relationship between synchronous Ethernet and Ethernet port allocation Additional port allocation rules on page 3-44 How to configure synchronous Ethernet LAN Configuration page on page 6-34 Upgrading to synchronous Ethernet Generating license keys on page 6-3 Synchronous Ethernet status indicators Synchronous Ethernet on page 7-10 Synchronous Ethernet alarms Alarms on page 7-17 IEEE 1588-2008 Transparent Clock PTP 700 is capable of operating as an IEEE 1588-2008 Transparent Clock. When operational, IEEE 1588-2008 event frames (Sync, Delay_Req, Pdelay_Req, Pdelay_Resp) have their âCorrection Fieldâ adjusted to reflect the residence time of the frame in the system. This results in greatly improved performance of downstream 1588-2008 slave clocks. The Transparent Clock feature is available at the Main PSU Port and at the SFP Port when a fiber SFP module is installed. Unicast and multicast addressing models are supported, along with UDP over IPv4 or IPv6, and Ethernet communication services. The IEEE 1588 messages can be encapsulated in Untagged, Ctagged, S-tagged, S-C-tagged and C-C-tagged Ethernet frames. Note For the most accurate residence time corrections, use Synchronous Ethernet in conjunction with the Transparent Clock feature. In this configuration, PTP 700 uses the Synchronous Ethernet clock to increase the accuracy of 1588 residence time measurements. Page 1-32 Chapter 1: Product description Ethernet bridging Further reading For information about⌠Refer to⌠Relationship between IEEE 1588-2008 Transparent Clock and TDM TDM description on page 1-34 Availability of IEEE 1588-2008 Transparent Clock Capability upgrades on page 1-52 Relationship between IEEE 1588-2008 Transparent Clock and Ethernet port allocation Additional port allocation rules on page 344 Relationship between IEEE 1588-2008 Transparent Clock and VLAN membership VLAN membership on page 3-45 Upgrading to IEEE 1588-2008 Generating license keys on page 6-3 How to configure IEEE 1588-2008 Transparent Clock LAN Configuration page on page 6-34 IEEE 1588-2008 Transparent Clock status indicators Synchronous Ethernet on page 7-10 IEEE 1588-2008 Transparent Clock alarms Alarms on page 7-17 Page 1-33 Chapter 1: Product description TDM bridging TDM bridging This section describes how TDM traffic (E1 or T1) may be carried over PTP 700 links. If a NIDU is installed at each link end, the PTP 700 link supports up to eight E1 channels or up to eight T1 channels. The link relays unstructured E1 or T1 data and provides accurate timing transfer. TDM description PTP 700 Series bridges up to eight E1 or T1 telecoms circuits over a single-hop PTP 700 wireless link using the optional Network Indoor Unit (NIDU). The NIDU provides the eight TDM interfaces on individual RJ45/RJ48 connectors, together with an Ethernet interface to the operatorâs data network and a separate Ethernet interface to the PTP 700 Series ODU. One NIDU is required at each end of the link. It operates from a 48 V DC power supply. TDM circuits established using the NIDUs are structure agnostic, meaning that the circuits can bridge framed or unframed data. The NIDUs are tightly integrated with associated ODUs providing for simple configuration, accurate timing transfer, low and predictable latency, high efficiency, quick settling time, and a timing-only mode that maintains timing transfer when the wireless link has insufficient capacity to bridge the configured TDM data. Through timing TDM bridging in the PTP 700 series uses the âthrough timingâ model. In other words, the clock frequency used for transmitting TDM data is, on average, exactly the same as the clock frequency received at the corresponding TDM port at the remote end of the link. The wander and jitter in the transmit clock complies with applicable requirements of ITU-T G.823 and G.824 without additional external frequency references. Timing transfer is independent between individual circuits, and between transmit and received directions of the same circuit. NIDUs and TDM TDM circuits in PTP 700 span a single wireless link. To transmit TDM data across a network segment consisting of several wireless links, use one pair of NIDUs for each wireless link, and interconnect the TDM ports at relay sites. The NIDU is not a general-purpose TDM multiplexer, and will not interwork with standards-based products from other manufacturers. The NIDU does not support (and does not need to support) internal, external or loop timing modes. The NIDU does not accept (or need) an external frequency reference. The NIDU is not separately managed, and it does not have an IP address. Instead, the ODU is used to configure and monitor the associated NIDU through the standard HTTP/HTTPS, SNMP, SMTP and syslog interfaces already used by the ODU. Page 1-34 Chapter 1: Product description TDM bridging The NIDU always connects to the ODU using the Main PSU port of the ODU. This constrains the flexible allocation of ports to services somewhat. Timing transfer for TDM circuits Accurate timing transfer for TDM circuits in the PTP 700 Series is based on the same underlying technology as the IEEE 1588 Transparent Clock and Synchronous Ethernet features. Consequently, the IEEE 588 and Synchronous Ethernet features are not available when TDM bridging is enabled. Similarly, TDM bridging is not available if either IEEE 1588 or Sync E is in use. The Adaptive setting for Link Symmetry is not compatible with TDM bridging. TDM bridging is a licensed feature, and may require an optional upgrade for the ODU firmware. Lowest TDM modulation mode In narrow channel bandwidths and lower modulation modes, the link may have insufficient capacity to relay the E1/T1 payload; in this case, the wireless link continues to carry timing information in order to maintain accurate clock synchronization. The relay of TDM data resumes automatically when the link reaches a suitable modulation mode. Links that are able to operate consistently in a high modulation mode can take advantage of lower link latency. This option is configured by setting the "Lowest TDM Modulation Mode" during installation. Appropriate settings for this control may be determined by using the LINKPlanner tool. The reduction in latency is achieved by disabling the relay of TDM data in lower modulation modes, and this necessarily results in somewhat lower availability for the TDM circuit. The loss of availability can be estimated using the Link Planner. The unit will override the user setting of Lowest TDM Modulation Mode if the selected mode has insufficient capacity to carry the TDM data, or if the mode demands very high latency and requires more buffering than the link can provide. Fixed frequency operation In the PTP 700 link, data errors may occur during channel changes on an operational link. It may be appropriate to minimize channel-change-related errors in a link carrying TDM traffic by preventing channel changes initiated by DSO. This can be achieved by barring all channels except one in the Spectrum Expert page, or alternatively by selecting Fixed Frequency mode. These steps unavoidably disable interference avoidance mechanisms, and should not be taken if the risk of errors due to interference is more severe than the risk due to channel changes. Fixed frequency operation is not available when radar detection requirements exist in the frequency band. Channel barring is allowed in radar regions, but it is unwise to bar all channels except one, as any radar signals detected on that channel will drop the link for up to 30 minutes. Page 1-35 Chapter 1: Product description TDM bridging Ethernet cables for TDM The Ethernet cables from the ODU via the PSU to the NIDU must be capable of supporting operation at 1000BASE-T. If the ODU port has negotiated a link at 100BASE-T, the NIDU will not send or receive TDM data and will not bridge customer data traffic. Further reading For information about⌠Refer to⌠The hardware required to implement TDM Network indoor unit (NIDU) on page 2-52 A typical E1 or T1 site deployment E1 or T1 interfaces on page 3-5 Where to locate the NIDU NIDU location on page 3-17 TDM interface specifications Ethernet interfaces on page 3-35 The effect of TDM on data throughput TDM traffic load on page 3-116 How to install TDM hardware Installing a NIDU on page 5-40 How to generate TDM (E1 or T1) license keys Generating license keys on page 6-3 How to install TDM license keys (part of the Installation Wizard) Software License Key page on page 6-11 How to enable E1 or T1 and configure TDM channels (part of the Installation Wizard) Interface Configuration page on page 6-14 How to configure NIDU LAN port autonegotiation LAN Configuration page on page 6-34 How to configure TDM channels and initiate loopback tests (after installation) TDM Configuration page on page 6-50 How to enable TDM alarms Diagnostic Alarms page on page 6-73 The meaning of TDM status attributes System Status page on page 7-3 The meaning of TDM alarms Alarms on page 7-17 How to check the NIDU LEDs, perform a TDM loopback test, and check for 1000BASE-T Testing a TDM link on page 8-18 To find the latency of a TDM link System Status page, TDM Latency attribute (Table 165) Alternatively, use LINKPlanner Page 1-36 Chapter 1: Product description System management System management This section introduces the PTP 700 management system, including the web interface, installation, configuration, alerts and upgrades. Management agent PTP 700 equipment is managed through an embedded management agent. Management workstations, network management systems or PCs can be connected to this agent using a choice of in-band or out-of-band network management modes. These modes are described in detail in Network management on page 1-38. The management agent includes a dual IPv4/IPv6 interface at the management agent. The IP interface operates in the following modes: ⢠IPv4 only (default) ⢠IPv6 only ⢠Dual IPv4/IPv6 In the dual IPv4/IPv6 mode, the IP interface is configured with an IPv4 address and an IPv6 address and can operate using both IP versions concurrently. This dual mode of operation is useful when a network is evolving from IPv4 to IPv6. The management agent supports the following application layer protocols (regardless of the management agent IP mode): ⢠Hypertext transfer protocol (HTTP) ⢠HTTP over transport layer security (HTTPS/TLS) ⢠RADIUS authentication ⢠TELNET ⢠Simple network management protocol (SNMP) ⢠Simple mail transfer protocol (SMTP) ⢠Simple network time protocol (SNTP) ⢠System logging (syslog) Note PTP 700 supports a single public key certificate for HTTPS. This certificate must be based on an IPv4 or IPv6 address as the Common Name. The Dual IPv4/IPv6 interface should not normally be used when HTTPS is required. Page 1-37 Chapter 1: Product description System management Network management IPv4 and IPv6 interfaces The PTP 700 ODU contains an embedded management agent with IPv4 and IPv6 interfaces. Network management communication is exclusively based on IP and associated higher layer transport and application protocols. The default IPv4 address of the management agent is 169.254.1.1. There is no default IPv6 address. The PTP 700 does not require use of supplementary serial interfaces. MAC address The management agent end-station MAC address is recorded on the enclosure and is displayed on the Status web page. The MAC address is not configurable by the user. VLAN membership The management agent can be configured to transmit and receive frames of one of the following types: untagged, priority-tagged, C-tagged (IEEE 802.1Q) or S-tagged (IEEE 802.1ad). C-tagged and S-tagged frames must be single tagged. The VLAN ID can be 0 (priority tagged) or in the range 1 to 4094. Ethernet and DSCP priority The management agent transmits IPv4 and IPv6 management packets with a configurable DSCP value in the range 0 to 63. If the management agent is configured to operate in a management VLAN, the Ethernet frames will be transmitted with a configurable Ethernet priority in the range 0 to 7. The same DSCP and Ethernet priorities are assigned to all management packets generated by the agent. Management frames are multiplexed with customer data frames of the same priority for transmission at the wireless port. Access to the management agent The management agent can be reached from any Ethernet port at the local ODU that is allocated to the Management Service or the Local Management Service. If the wireless link is established, the management agent can also be reached from the remote ODU via an Ethernet port that is allocated to the Management Service. Management frames are processed by the management agent if (a) the destination MAC address in the frame matches the ODU MAC address, and (b) the VLAN ID in the frame matches the VLAN configuration of the management agent. If Local Packet Filtering is enabled, unicast frames forwarded to the management agent are filtered, that is, not forwarded in the customer data network or the management network. Page 1-38 Chapter 1: Product description System management MAC address and IP address of the management agent The MAC address and IP address used by the management agent will be the same at each port that is allocated the Management Service or Local Management Service. The management agent does not provide the function of a dual-homed or multi-homed host. Network designers should take care to ensure that the ODU will not be connected to more than one IP network. Further examples of useful port allocation schemes are provided in Chapter 3: System planning. Source address learning If Local Packet Filtering is enabled, the PTP 700 learns the location of end stations from the source addresses in received management frames. The agent filters transmitted management frames to ensure that the frame is transmitted at the appropriate Ethernet port, or over the wireless link as required to reach the reach the correct end station. If the end station address is unknown, then management traffic is transmitted at each of Ethernet port enabled for management and over the wireless link. Further reading For information about⌠Refer to⌠Planning the IP interface IP interface on page 3-45 How to configure the IP interface Interface Configuration page on page 6-14 How to configure the target MAC address Wireless Configuration page on page 6-21 Planning VLAN membership VLAN membership on page 3-45 How to configure VLAN for the management interface Interface Configuration page on page 6-14 Planning the Ethernet and IP (DSCP) priority Priority for management traffic on page 3-45 Planning the use of Ethernet ports for customer and management traffic Additional port allocation rules on page 3-44 LAN Configuration page on page 6-34 Page 1-39 Chapter 1: Product description System management IPv6 The PTP 700 management agent supports the following IPv6 features: Neighbor discovery PTP 700 supports neighbor discovery for IPv6 as specified in RFC 4861 including: ⢠Neighbor un-reachability detection (NUD), ⢠Sending and receiving of neighbor solicitation (NS) and neighbor advertisement (NA) messages, ⢠Processing of redirect functionality. PTP 700 sends router solicitations, but does not process router advertisements. Path MTU discovery and packet size PTP 700 supports path MTU discovery as specified in RFC 1981, and packet fragmentation and reassembly as specified in RFC 2460 and RFC 5722. ICMP for IPv6 PTP 700 supports ICMPv6 as specified in RFC 4443. PTP 700 does not support RFC 4884 (multi-part messages). Addressing The PTP 700 management agent is compatible with the IPv6 addressing architecture specified in RFC 4291. PTP 700 allows static configuration of the following: ⢠Global unicast address ⢠IPv6 prefix length ⢠IPv6 default router. PTP 700 additionally assigns an automatically configured Link Local address using stateless address auto-configuration (SLAAC) as specified in RFC 4862. PTP 700 does not assign a global unicast IP address using SLAAC. PTP 700 responds on the standard management agent interfaces (HTTP, HTTPS, syslog, Telnet, SNMP, SMTP, SNTP) using the global unicast address. Privacy extensions PTP 700 does not support the privacy extensions specified in RFC 4941. DHCPv6 PTP 700 does not support address assignment using DHCPv6. The address of the management agent must be configured statically. Page 1-40 Chapter 1: Product description System management Multicast listener discovery for IPv6 The PTP 700 management agent supports Multicast Listener Discovery version 1 (MLDv1) as specified in RFC 2710. PTP 700 does not support Multicast Listener Discovery version 2 (MLDv2). Textual representation of IPv6 addresses PTP 700 allows users to input text-based IP addresses in any valid format defined in RFC 5952. IPv6 addresses are automatically converted by PTP 700 to the preferred compressed form, apart from those using the prefix length on the same line as the address, such as 2000::1/64. Security PTP 700 does not support IP security (IPsec). Further reading For information about⌠Refer to⌠Planning the IPv6 interface IP interface on page 3-45 How to enable IPv6 capability Software License Key page on page 6-11 How to configure IPv6 Interface Configuration page on page 6-14 LAN Configuration page on page 6-34 Web server The PTP 700 management agent contains a web server. The web server supports the HTTP and HTTPS/TLS interfaces. Web-based management offers a convenient way to manage the PTP 700 equipment from a locally connected computer or from a network management workstation connected through a management network, without requiring any special management software. The web-based interfaces are the only interfaces supported for installation of PTP 700. Web pages The web-based management interfaces provide comprehensive web-based fault, configuration, performance and security management functions organized into the following web-pages and groups: ⢠Home: The Home web-page reports Wireless Link Status and basic information needed to identify the link. The Home page additionally lists all active alarm conditions. ⢠Status: The Status web-page reports the detailed status of the PTP 700. Page 1-41 Chapter 1: Product description System management ⢠System: These web-pages are used for configuration management, including IP and Ethernet, AES encryption keys, quality of service and software upgrade. The System pages additionally provide detailed counters and diagnostic measurements used for performance management. ⢠Installation: The Installation Wizard is used to install license keys, configure the PTP 700 wireless interface and to arm the unit ready for alignment. ⢠Management: These web-pages are used to configure the network management interfaces. ⢠Security: The Security Wizard is used to configure the HTTPS/TLS interface and other security parameters such as the AES wireless link encryption key and the key of keys for encrypting CSPs on the ODU. The Security Wizard is disabled until AES encryption is enabled by license key. ⢠Change Password: The Change Password web page changes the web interface password of the active user. The User Accounts page is also used to change passwords. ⢠Logout: Allows a user to log out from the web-based interface. Transport layer security The HTTPS/TLS interface provides the same set of web-pages as the HTTP interface, but allows HTTP traffic to be encrypted using Transport Layer Security (TLS). PTP 700 uses AES encryption for HTTPS/TLS. Operation of HTTPS/TLS is enabled by purchase of an optional AES upgrade. HTTPS/TLS requires installation of a private key and a public key certificate where the common name of the subject in the public key certificate is the IP address or host name of the PTP 700 unit. PTP 700 supports certificates with 2048-bit key size. HTTPS/TLS operation is configured through the web-based interfaces using the Security Wizard. Note The PTP 700 has no default public key certificate, and Cambium Networks is not able to generate private keys or public key certificates for specific network applications. Note PTP 700 supports a single public key certificate for HTTPS. This certificate must be based on an IPv4 or IPv6 address as the Common Name. Any attempt to use HTTPS without a certificate for the associated IP address will not be secure, and will trigger browser security warnings. It follows from this that the Dual IPv4/IPv6 interface should not normally be used when HTTPS is required. User account management PTP 700 allows a network operator to configure a policy for login attempts, the period of validity of passwords and the action taken on expiry of passwords. Identity-based user accounts The PTP 700 web-based interface provides two methods of authenticating users: Page 1-42 Chapter 1: Product description System management ⢠Role-based user authentication allows the user, on entry of a valid password, to access all configuration capabilities and controls. This is the default method. ⢠Identity-based user authentication supports up to 10 users with individual usernames and passwords. When identity-based user accounts are enabled, a security officer can define from one to ten user accounts, each of which may have one of the three possible roles: ⢠Security officer. ⢠System administrator. ⢠Read only. Identity-based user accounts are enabled in the Local User Accounts page of the web-based interface. Password complexity PTP 700 allows a network operator to enforce a configurable policy for password complexity. Password complexity configuration additionally allows a pre-determined best practice configuration to be set. SNMP control of passwords PTP 700 allows the role-based and identity-based passwords for the web-based interface to be updated using the proprietary SNMP MIB. This capability is controlled by the SNMP Control of Passwords, and is disabled by default. SNMP Control of Passwords is automatically and permanently disabled in the FIPS 140-2 mode. SNMP Control of Passwords can be used together with SNMPv3 to provide a secure means to update passwords from a central network manager. However, password complexity rules are not applied. Further reading For information about⌠Refer to⌠How to log in and use the menu Using the web interface on page 6-6 Planning the security material needed for HTTPS/TLS. Security planning on page 3-51 How to configure user accounts Local User Accounts page on page 6-61 RADIUS authentication PTP 700 supports remote authentication for users of the web interface using the Remote Authentication Dial-In User Service (RADIUS) with one of the following authentication methods: ⢠Challenge Handshake Authentication Protocol (CHAP) Page 1-43 Chapter 1: Product description ⢠System management Microsoft CHAP Version 2 (MS-CHAPv2) PTP 700 supports connections to primary and secondary RADIUS servers. The RADIUS interface is configured through the RADIUS Authentication page of the web-based interfaces. PTP 700 RADIUS supports the standard Service Type attribute to indicate authentication roles of System Administrator and Read Only together with a vendor specific attribute to indicate authentication roles of Security Officer, System Administrator, and Read Only. Remote authentication can be used in addition to local authentication, or can be used as a replacement for local authentication. If remote and local authentications are used together, PTP 700 checks log in attempts against locally stored user credentials before submitting a challenge and response for remote authentication. Remote authentication is not attempted if the username and password match locally stored credentials, or fails against the local database. RADIUS is only available when PTP 700 is configured for Identity-based User Accounts. Further reading For information about⌠Refer to⌠How to plan the use of RADIUS Planning for RADIUS operation on page 3-57 How to configure RADIUS. RADIUS Configuration page on page 6-66 SNMP The management agent supports fault and performance management by means of an SNMP interface. The management agent is compatible with SNMP v1, SNMP v2c, and SNMPv3 using the following Management Information Bases (MIBs): ⢠RFC-1493. BRIDGE-MIB. dot1dBase group. ⢠RFC-2233. IF-MIB. Interfaces group, and ifXTable table. ⢠RFC-3411. SNMP-FRAMEWORK-MIB. snmpEngine group. ⢠RFC-3412. SNMP-MPD-MIB. snmpMPDStats group. ⢠RFC-3413. SNMP-TARGET-MIB. snmpTargetObjects group and SNMP-NOTIFICATION-MIB snmpNotifyTable table. ⢠RFC-3414. SNMP-USER-BASED-SM-MIB. usmStats group and usmUser group. ⢠RFC-3415. SNMP-VIEW-BASED-ACM-MIB vacmMIBObjects group. ⢠RFC-3418. SNMPv2-MIB. System group, SNMP group, and set group. ⢠RFC-3826. SNMP-USM-AES-MIB. usmAesCfb128Protocol OID. ⢠RFC-4293 IP-MIB, ipForwarding, ipAdEntAddr, ipAdEntIfIndex, ipAdEntNetMask ⢠PTP 700 Series proprietary MIB. Page 1-44 Chapter 1: Product description System management Further reading For information about⌠Refer to⌠How to plan for SNMPv1/2c Planning for SNMP operation on page 3-49 How to enable SNMP control of HTTP, Telnet and passwords Web-Based Management page on page 6-58 How to configure SNMPv1 or SNMPv2c SNMP pages (for SNMPv1/2c) on page 6-89 How to upgrade software remotely using Trivial FTP (TFTP) triggered by SNMP Upgrading software using TFTP on page 6-117 Step 7: Enter HTTP and Telnet Settings on page 6-101 Simple Network Time Protocol (SNTP) The clock supplies accurate date and time information to the system. It can be set to run with or without a connection to a network time server (SNTP). It can be configured to display local time by setting the time zone and daylight saving in the Time web page. If an SNTP server connection is available, the clock can be set to synchronize with the server time at regular intervals. For secure applications, the PTP 700 can be configured to authenticate received NTP messages using an MD5 signature. Further reading For information about⌠Refer to⌠How to plan for SNTP operation Planning for SNTP operation on page 3-51 How to configure SNTP Time Configuration page on page 6-74 Page 1-45 Chapter 1: Product description System management SNMPv3 security SNMP Engine ID PTP 700 supports four different formats for SNMP Engine ID: ⢠MAC address ⢠IPv4 address ⢠Configurable text string ⢠IPv6 address SNMPv3 security configuration is re-initialized when the SNMP Engine ID is changed. User-based security model PTP 700 supports the SNMPv3 user-based security model (USM) for up to 10 users, with MD5, SHA-1, DES and (subject to the license key) AES protocols in the following combinations: ⢠No authentication, no privacy, ⢠MD5, no privacy, ⢠SHA-1, no privacy, ⢠MD5, DES, ⢠SHA-1, DES, ⢠MD5, AES, ⢠SHA-1, AES. Use of AES privacy requires the PTP 700 AES upgrade described in AES license on page 1-49. View-based access control model PTP 700 supports the SNMPv3 view-based access control model (VACM) with a single context. The context name is the empty string. The context table is read-only, and cannot be modified by users. Access to critical security parameters The SNMPv3 management interface does not provide access to critical security parameters (CSPs) of PTP 700. It is not possible to read or modify AES keys used to encrypt data transmitted at the wireless interface. Neither is it possible to read or modify security parameters associated with TLS protection of the web-based management interface. The recovery mode option to zeroize CSPs does not affect SNMPv3 configuration. MIB-based management of SNMPv3 security PTP 700 supports a standards-based approach to configuring SNMPv3 users and views through the SNMP MIB. This approach provides maximum flexibility in terms of defining views and security levels appropriate for different types of user. PTP 700 provides a default SNMPv3 configuration. This initial configuration is not secure, but it provides the means by which a secure configuration can be created using SNMPv3. Page 1-46 Chapter 1: Product description System management The secure configuration should be configured in a controlled environment to prevent disclosure of the initial security keys necessarily sent as plaintext, or sent as encrypted data using a predictable key. The initial security information should not be configured over an insecure network. The default configuration is restored when any of the following occurs: ⢠All ODU configuration data is erased. ⢠All SNMP users are deleted using the SNMP management interface. ⢠The SNMP Engine ID Format has been changed. ⢠The SNMP Engine ID Format is Internet Address AND the Internet Address has been changed. ⢠The SNMP Engine ID Format is Text String AND the text string has been changed. ⢠The SNMP Engine ID Format is MAC Address AND configuration has been restored using a file saved from a different unit. ⢠SNMPv3 Security Management is changed from web-based to MIB-based. The default user configuration is specified in SNMPv3 default configuration (MIB-based) on page 3-55. PTP 700 creates the initial user and template users with localized authentication and privacy keys derived from the passphrase string 123456789. Authentication keys for the templates users are fixed and cannot be changed. Any or all of the template users can be deleted. The default user initial is created with a view of the entire MIB, requiring authentication for SET operations. There is no access for template users. Note VACM grants access for requests sent with more than the configured security level. The default user initial will have read/write access to the whole of the MIB. This is described in further detail in View-based access control model on page 1-46. The template users have no access to the MIB in the default configuration. User initial will normally be used to create one or more additional users with secret authentication and privacy keys, and with appropriate access to the whole of the MIB or to particular views of the MIB according to the operatorâs security policy. New users must be created by cloning template users. The user initial may then be deleted to prevent access using the well-known user name and keys. Alternatively, the keys associated with initial may be set to some new secret value. Web-based management of SNMPv3 security PTP 700 supports an alternative, web-based approach for configuring SNMPv3 security. In this case, the web-based interface allows users to specify SNMPv3 users, security levels, privacy and authentication protocols, and passphrases. Web-based management will be effective for many network applications, but the capabilities supported are somewhat less flexible than those supported using the MIB-based security management. Page 1-47 Chapter 1: Product description System management Selection of web-based management for SNMPv3 security disables the MIB-based security management. Web-based management of SNMPv3 security allows for two security roles: ⢠Read Only ⢠System Administrator Read Only and System Administrator users are associated with fixed views allowing access to the whole of the MIB, excluding the objects associated with SNMPv3 security. System Administrators have read/write access as defined in the standard and proprietary MIBs. Web-based management of SNMPv3 security allows an operator to define the security levels and protocols for each of the security roles; all users with the same role share a common selection of security level and protocols. Web-based security configuration is re-initialized when any of the following occurs: ⢠All ODU configuration data is erased. ⢠The SNMP Engine ID Format has been changed. ⢠The SNMP Engine ID Format is Internet Address and the Internet Address has been changed. ⢠The SNMP Engine ID Format is Text String and the text string has been changed. ⢠The SNMP Engine ID Format is MAC Address and configuration has been restored using a file saved from a different unit. ⢠SNMPv3 Security Management is changed from MIB-based to web-based. Additionally, all SNMP user accounts are disabled when the authentication protocol, the privacy protocol, or the security level is changed. Downgrade of the license key A possible lockout condition exists if a user downgrades the PTP 700 license key so as to disable the AES capability when SNMPv3 users are configured with AES privacy and VACM is configured to require privacy. In this case, recovery is by either (a) restoring the correct license key, or (b) using recovery mode to rest all configuration and entering new configuration. Option (b) will cause default users and access configuration to be re-created. Further reading For information about⌠Refer to⌠How to plan for SNMPv3 operation Planning for SNMPv3 operation on page 3-52 How to configure SNMPv3 SNMP pages (for SNMPv3) on page 6-80 Page 1-48 Chapter 1: Product description System management System logging (syslog) PTP 700 supports the standard syslog protocol to log important configuration changes, status changes and events. The protocol complies with RFC 3164. PTP 700 creates syslog messages for configuration changes to any attribute that is accessible via the web-based interface, or via the enterprise MIB at the SNMP interface. PTP 700 additionally creates syslog messages for changes in any status variable displayed in the web-based interface. PTP 700 creates syslog messages on a number of events (for example successful and unsuccessful attempts to log in to the web-based interface). PTP 700 can be configured to send syslog messages to one or two standard syslog servers. Additionally, PTP 700 logs event notification messages locally. Locally-stored event messages survive reboot of the unit, and are overwritten only when the storage capacity is exhausted (approximately 2000 messages). The locally stored events can be reviewed using the web-based user interface. Only users with Security Officer role are permitted to configure the syslog client. Users with Security Officer, System Administrator or Read Only roles are permitted to review the locally logged event messages. Further reading For information about⌠Refer to⌠Configuring system logging Syslog Configuration page on page 6-78 Syslog alarms Alarms on page 7-17 How to view the local log of event messages Syslog page on page 7-22 How to interpret syslog messages Format of syslog server messages on page 7-22 AES license PTP 700 provides optional encryption using the Advanced Encryption Standard (AES). Encryption is not available in the standard PTP 700 system. AES upgrades are supplied as an access key purchased from your Cambium Point-to-Point distributor or solutions provider. The access key authorizes AES operation for one ODU. Two access keys are needed to operate AES on a link. AES encryption may be used in the following ways: ⢠At the wireless port to encrypt data transmitted over the wireless link. ⢠At the SNMP management interface in the SNMPv3 mode. ⢠At the HTTPS/TLS management interface. Two levels of encryption are available to purchase: Page 1-49 Chapter 1: Product description System management ⢠128-bit: This allows an operator to encrypt all traffic sent over the wireless link using 128-bit encryption. ⢠256-bit: This allows an operator to encrypt traffic using either 128-bit or 256-bit encryption. Encryption must be configured with the same size key in each direction. AES encryption at the PTP 700 wireless port is based on pre-shared keys. An identical key must be entered at each end of the link. AES encryption for SNMPv3 or TLS is always based on a 128-bit key, regardless of level enabled in the PTP 700 license key. Further reading For information about⌠Refer to⌠Capability upgrades for AES Capability upgrades on page 1-52 AES and HTTPS/TLS operation Planning for HTTPS/TLS operation on page 3-51 AES and SNMPv3 operation Planning for SNMPv3 operation on page 3-52 How to generate an AES license key Generating license keys on page 6-3 How to enable AES capability Software License Key page on page 6-11 How to configure AES encryption System Configuration page on page 6-30 How to configure security with AES Security menu on page 6-93 Critical security parameters The critical security parameters (CSPs) are as follows: ⢠Key of keys. ⢠AES encryption keys for the wireless interface. ⢠Private key for the HTTPS/TLS interface. ⢠Entropy value for the HTTPS/TLS interface. ⢠User account passwords for the web-based interface. CSPs can be reset (zeroized) along with other security-related attributes using the web-based interface. Further reading For information about⌠Refer to⌠How to zeroise CSPs Zeroize CSPs page on page 6-104 How to zeroise CSPs (recovery mode) Zeroize Critical Security Parameters on page 7-69 Page 1-50 Chapter 1: Product description System management Software upgrade The management agent supports application software upgrade using either the web-based interface or the SNMP interface. PTP 700 software images are digitally signed, and the ODU will accept only images that contain a valid Cambium Networks digital signature. The ODU always requires a reboot to complete a software upgrade. Note Obtain the application software and this user guide from the support website BEFORE warranty expires. Caution ODU software version must be the same at both ends of the link. Limited operation may sometimes be possible with dissimilar software versions, but such operation is not supported by Cambium Networks. Caution Take care when upgrading ODU software using the wireless link to a remote ODU. Upgrade the remote unit first, reboot the remote ODU, and then upgrade the local unit to the same software version. Further reading For information about⌠Refer to⌠How to upgrade the software using the web interface Software Upgrade page on page 6-55 How to upgrade software remotely using Trivial FTP (TFTP) triggered by SNMP Upgrading software using TFTP on page 6-117 Page 1-51 Chapter 1: Product description System management Capability upgrades ODUs are shipped with a default License Key factory-installed. The default license key enables a limited set of capabilities which depend upon the ODU variant. Capability upgrades are purchased from Cambium and supplied as access keys. The user then enters the access key into the PTP License Key Generator web page on the support website. The License Key Generator creates a new license key and delivers it by email. The user then installs the license key using the ODU web interface. License keys are bound to a single ODU and are not transferrable. Further reading For information about⌠Refer to⌠Capabilities of the PTP 700 Connectorized ODU PTP 700 Connectorized ODU on page 2-3 Capabilities of the PTP 700 Connectorized+Integrated ODU PTP 700 Connectorized+Integrated ODU on page 2-6 Ordering capability upgrades ODU capability upgrades on page 2-8 How to obtain License Keys Generating license keys on page 6-3 How to install capability upgrades Software License Key page on page 6-11 Full capability trial period A full capability trial period is available for PTP 700 units that are licensed for âLiteâ (up to 225 Mbps) data throughput capability. This trial allows the ODU to operate with âFullâ capability (up to 450 Mbps) during a 60 day period, reverting to the Lite capability afterwards. The trial period can be started, paused and resumed from the web interface. Further reading For information about⌠Refer to⌠How to control the trial period Software License Key page on page 6-11 Page 1-52 Chapter 1: Product description System management Recovery mode The PTP 700 recovery mode provides a means to recover from serious configuration errors including lost or forgotten passwords and unknown IP addresses. Recovery mode also allows new main application software to be loaded even when the integrity of the existing main application software image has been compromised. The most likely cause of an integrity problem with the installed main application software is where the power supply has been interrupted during an earlier software upgrade. The ODU operates in recovery mode in the following circumstances: ⢠When a checksum error occurs for the main application software image. ⢠When a power on, power off, power on cycle is applied to the ODU with the power off period being around 5sec. Recovery mode supports a single IPv4 interface, with IP address 169.254.1.1, and with default link settings. Recovery mode does not support IPv6. Note When Recovery has been entered through a power on/off/on cycle, the ODU will revert to normal operation if no web access has been made to the unit within 30 seconds. This prevents the unit remaining inadvertently in recovery following a power outage. Recovery mode options Options in recovery mode (IPv4 only) are as follows: ⢠Load new main application software. ⢠Reset all configuration data. This option resets IP, Ethernet and security configuration ⢠Reset IP and Ethernet configuration. ⢠Reset (zeroize) critical security parameters. ⢠Reboot with existing software and configuration. If recovery mode has been entered because of a checksum error, after a 30 second wait the ODU will attempt to reboot with existing software and configuration. The recovery software image is installed during manufacture of the ODU and cannot be upgraded by operators. Further reading For information about⌠Refer to⌠How to recover from configuration errors or software image corruption Recovery mode on page 7-63 Page 1-53 Chapter 1: Product description FIPS 140-2 mode FIPS 140-2 mode This section describes the (optional) FIPS 140-2 cryptographic mode of operation. PTP 700 provides an optional secure cryptographic mode of operation validated to Level 2 of Federal Information Processing Standards (FIPS) Publication 140-2. FIPS 140-2 approved mode PTP 700 operates in the FIPS 140-2 approved mode whenever a validated version of the special FIPS software is installed in the PTP 700 ODU. Caution Use following NIST web site to confirm that the FIPS software has been validated: http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm The special FIPS software image can be identified by a FIPS- prefix to the filename, for example: FIPS-PTP700-01-00.DLD2. Note PTP 700 will not upload the FIPS software unless the unit is licensed for 128-bit or 256bit AES encryption and for FIPS operation. Indication of FIPS 140-2 approved mode The FIPS 140-2 approved mode is indicated by the âFIPS 140-2â text displayed at the top of the navigation bar in the web-based interface, as shown in Figure 5. Page 1-54 Chapter 1: Product description FIPS 140-2 mode Figure 5 Indication of FIPS 140-2 capability FIPS 140-2 Enforced configuration in FIPS approved mode When the PTP 700 ODU operates in the FIPS approved mode, the following configuration settings are automatically enforced: ⢠Identity-based user accounts is Enabled. ⢠Telnet management interface is Disabled. ⢠SNMP control of HTTP and Telnet is Disabled. ⢠SNMP control of passwords is Disabled. ⢠TFTP client is Disabled. Secure mode alarm The Secure mode alarm indicates that the unit is operating in the FIPS approved mode, but that it has not been configured correctly for FIPS 140-2 operation. The secure mode alarm appears in the System Summary page as shown in Figure 6. Figure 6 Secure mode alarm in the System Summary page The Secure mode alarm is also displayed in the first page of the Security Wizard as shown in Figure 7. Page 1-55 Chapter 1: Product description FIPS 140-2 mode Figure 7 Secure mode alarm in the Security Wizard Security configuration for FIPS approved mode The security configuration for the FIPS approved mode consists of the following: ⢠The HTTPS/TLS management interface must be correctly configured, including: o Key of keys (128-bit or 256-bit to match the AES license) Entropy (512-bit) Private key (2048-bit key size) Public key certificate (2048-bit key size) ⢠The HTTP management interface must be Disabled ⢠AES encryption must be configured and enabled at the wireless interface. When the security configuration is completed correctly, the Secure mode alarm is cleared from the System Summary page and the Security Wizard displays the Active state as shown in Figure 8. Figure 8 Secure mode active Page 1-56 Chapter 1: Product description FIPS 140-2 mode Further reading For information about⌠Refer to⌠Cryptographic material needed for FIPS operation Planning for FIPS 140-2 operation on page 3-58 Installing license keys Software License Key page on page 6-11 Loading software images Software Upgrade page on page 6-55 Configuring the ODU for FIPS operation Configuring security for FIPS 140-2 applications on page 6-105 Exiting from the FIPS operational state A PTP 700 ODU in the FIPS operation state can be prepared to accept new security configuration by zeroizing critical security parameters (CSPs). The unit remains in the FIPS approved mode. Further reading For information about⌠Refer to⌠Zeroizing the CSPs Zeroize CSPs page on page 6-104 Reverting to the standard (non-FIPS) mode A FIPS 140-2 capable ODU can be used in standard (non-FIPS) mode by loading a standard (nonFIPS) software image and rebooting. The critical security parameters (CSPs) are zeroized when the unit is no longer FIPS 140-2 capable. Further reading For information about⌠Refer to⌠Exiting the FIPS approved mode Managing security on page 7-46 Page 1-57 Chapter 2: System hardware This chapter describes the hardware components of a PTP 700 link. The following topics are described in this chapter: ⢠Outdoor unit (ODU) on page 2-2 ⢠Power supply units (PSU) on page 2-15 ⢠Antennas and antenna cabling on page 2-19 ⢠Ethernet cabling on page 2-34 ⢠PTP-SYNC unit on page 2-44 ⢠GPS receiver on page 2-50 ⢠Network indoor unit (NIDU) on page 2-52 Page 2-1 Chapter 2: System hardware Outdoor unit (ODU) Outdoor unit (ODU) ODU description One ODU is required for each link end. The ODU is a self-contained transceiver unit that houses both radio and networking electronics. Hardware platform variants PTP 700 ODUs are available in two different hardware platform variants: ⢠PTP 700 Connectorized ODU ⢠PTP 700 Connectorized+Integrated ODU Regional variants Each of the PTP 700 hardware platform variants is available in three different regional variants. The regional variants are supplied with default country licenses as follows: ⢠⢠FCC/IC: âUSAâ country license with regulatory bands: 1 â5.8 GHz FCCâ 13 â5.4 GHz FCC U-NII 2Câ 14 â4.9 GHz Public Safety, USA/Canadaâ 38 â5.2 GHz FCC U-NII 2Aâ 82 â4.4 GHz NTIAâ 84 â5.1 GHz FCC U-NII 1â 90 â5.4 GHz FCC U-NII 2C (Parabolic antenna only)â 91 â5.2 GHz FCC U-NII 2A (Parabolic antenna only)â 92 â5.1 GHz FCC U-NII 1 (Parabolic antenna only)â RoW: âOtherâ country license with regulatory bands: ⢠8 â5.4 GHz unrestrictedâ 35 â5.8 GHz unrestrictedâ 61 â4.9 GHz unrestrictedâ 62 â5.2 GHz unrestrictedâ 81 â4.4 GHz NATO Band IVâ EU: âEUâ country license with regulatory band: 26 â5.4 GHz ETSIâ For details of how to configure the ODUs to operate with other country licenses, refer to Generating license keys on page 6-3 and Software License Key page on page 6-11. The list of available countries depends upon the regional variant. The list of available regulatory bands depends on the country. Page 2-2 Chapter 2: System hardware Outdoor unit (ODU) Capacity variants Many of the PTP 700 ODU variants are available with the Lite or Full capacity license. ODUs licensed for Lite capacity can be licensed for the Full capacity by purchase of an upgrade (see ODU capability upgrades on page 2-8). The ATEX/HAZLOC ODU variants are available only with the Full capacity license. ATEX/HAZLOC variants PTP 700 is available in ATEX/Hazloc variants for operation in locations where explosive gas hazards exist, as defined by Hazloc (USA) and ATEX (Europe). ATEX/HAZLOC variants are similar to the standard product except that: ⢠ODUs are supplied with the Full capacity license ⢠The frequency range is restricted to 4940 MHz to 5850 MHz ⢠The maximum EIRP generated by ODU is restricted to comply with the ATEX and HAZLOC standards PTP 700 Connectorized ODU The PTP 700 Connectorized ODU is intended to work with separately mounted external antennas (Figure 9). External antennas generally have higher gains than the integrated antennas, allowing the PTP 700 to cope with more difficult radio conditions. Page 2-3 Chapter 2: System hardware Outdoor unit (ODU) Figure 9 PTP 700 Connectorized ODU (front and rear views) Note To determine when to install external antennas and to calculate their impact on link performance and regulatory limits, see Planning for connectorized units on page 3-29. To select antennas, RF cables and connectors for connectorized units, see Antennas and antenna cabling on page 2-19. Attention Pour dĂŠterminer si il est nĂŠcessaire dâinstaller une liaison radiofrĂŠquence avec des antennes externes et pour calculer leur impact sur les performances de la liaison et les limites rĂŠglementaires, voir Planning for connectorized units page 3-29. Pour sĂŠlectionner les antennes, câbles et connecteurs RF pour les liaisons radiofrĂŠquence sans antenne intĂŠgrĂŠe, voir Antennas and antenna cabling page 2-19. Capacity and capability licensing PTP 700 ODUs are available with âLiteâ data throughput capability (up to 225 Mbps) or âFullâ data throughput capability (up to 450 Mbps). ODUs additionally support the following capability upgrades (see ODU capability upgrades on page 2-8): Page 2-4 Chapter 2: System hardware Outdoor unit (ODU) ⢠Data throughput above 225 Mbps ⢠SFP port operation ⢠AES encryption ⢠Synchronous Ethernet and 1588 Transparent Clock ⢠TDM (E1 or T1) operation ⢠Group access Full capability trial period A full capability trial period is available for PTP 700 ODUs that are licensed for âLiteâ (up to 225 Mbps) data throughput capability. This trial allows the ODU to operate with âFullâ capability (up to 450 Mbps) during a 60 day period, reverting to Lite capability afterwards. The trial period can be started, paused and resumed from the web interface (Software License Key page on page 6-11). Individual ODU part numbers Order PTP 700 Connectorized ODUs from Cambium Networks (Table 4). Each of the parts listed in Table 4 includes the following items: ⢠One Connectorized ODU ⢠One connectorized ODU mounting bracket (Figure 11). Table 2 PTP 700 Connectorized individual ODU part numbers Cambium description Cambium part number PTP 700 Connectorized ODU (FCC) C045070B001 PTP 700 Connectorized ODU (Global) C045070B003 PTP 700 Connectorized ODU (EU) C045070B005 PTP 700 Lite Connectorized ODU (FCC) C045070B007 PTP 700 Lite Connectorized ODU (Global) C045070B009 PTP 700 Lite Connectorized ODU (EU) C045070B011 PTP 700 ATEX/HAZLOC Connectorized ODU (FCC) C045070B013 PTP 700 ATEX/HAZLOC Connectorized ODU (Global) C045070B015 PTP 700 ATEX/HAZLOC Connectorized ODU (EU) C045070B017 ODU kit part numbers Order PTP 700 Connectorized ODU kits from Cambium Networks (Table 5). Each of the parts listed in Table 5 includes the following items: ⢠One Connectorized ODU Page 2-5 Chapter 2: System hardware Outdoor unit (ODU) ⢠One AC+DC Power Injector PSU. ⢠One line cord, either US or EU as indicated. The PTP 700 Connectorized ODU already includes the connectorized bracket, so this is not included separately in the kit. Table 3 ODU kit part numbers for Connectorized ODUs Cambium description Cambium part number PTP 700 Connectorized END (FCC) C045070H001 PTP 700 Connectorized END - US Line Cord (Global) C045070H004 PTP 700 Connectorized END - EU Line Cord (Global) C045070H007 PTP 700 Connectorized END (EU) C045070H010 PTP 700 Lite Connectorized END - US Line Cord (Global) C045070H013 PTP 700 Connectorized+Integrated ODU The PTP 700 Connectorized+Integrated ODU provides a choice between using external antennas, similar to the Connectorized ODU, or a 21 dBi integrated antenna (Figure 10). The integrated antenna offers a convenient and easily-deployed solution where the additional gain of external antennas is not needed. Figure 10 PTP 700 Connectorized+Integrated ODU (front and rear views) Page 2-6 Chapter 2: System hardware Outdoor unit (ODU) Note To determine when to install external antennas and to calculate their impact on link performance and regulatory limits, see Planning for connectorized units on page 3-29. To select antennas, RF cables and connectors for connectorized units, see Antennas and antenna cabling on page 2-19. Attention Pour dĂŠterminer si il est nĂŠcessaire dâinstaller une liaison radiofrĂŠquence avec des antennes externes et pour calculer leur impact sur les performances de la liaison et les limites rĂŠglementaires, voir Planning for connectorized units page 3-29. Pour sĂŠlectionner les antennes, câbles et connecteurs RF pour les liaisons radiofrĂŠquence sans antenne intĂŠgrĂŠe, voir Antennas and antenna cabling page 2-19. Capacity and capability licensing PTP 700 ODUs are available with âLiteâ data throughput capability (up to 225 Mbps) or âFullâ data throughput capability (up to 450 Mbps). ODUs additionally support the following capability upgrades (see ODU capability upgrades on page 2-8): ⢠Data throughput above 225 Mbps ⢠SFP port operation ⢠AES encryption ⢠Synchronous Ethernet and 1588 Transparent Clock ⢠TDM (E1 or T1) operation ⢠Group access Full capability trial period A full capability trial period is available for PTP 700 ODUs that are licensed for âLiteâ (up to 225 Mbps) data throughput capability. This trial allows the ODU to operate with âFullâ capability (up to 450 Mbps) during a 60 day period, reverting to Lite capability afterwards. The trial period can be started, paused and resumed from the web interface (Software License Key page on page 6-11). Individual ODU part numbers Order PTP 700 Connectorized+Integrated ODUs from Cambium Networks (Table 4). Each of the parts listed in Table 4 includes the following items: ⢠One Connectorized+Integrated ODU. Coonectorized+Integrated ODUs, when sold individually, are supplied without mounting brackets. Page 2-7 Chapter 2: System hardware Outdoor unit (ODU) Table 4 PTP 700 Connectorized+Integrated individual ODU part numbers Cambium description Cambium part number PTP 700 Connectorized+Integrated ODU (FCC) C045070B002 PTP 700 Connectorized+Integrated ODU (Global) C045070B004 PTP 700 Connectorized+Integrated ODU (EU) C045070B006 PTP 700 Lite Connectorized+Integrated ODU (FCC) C045070B008 PTP 700 Lite Connectorized+Integrated ODU (Global) C045070B010 PTP 700 Lite Connectorized+Integrated ODU (EU) C045070B012 PTP 700 ATEX/HAZLOC Connectorized+Integrated ODU (FCC) C045070B014 PTP 700 ATEX/HAZLOC Connectorized+Integrated ODU (Global) C045070B016 PTP 700 ATEX/HAZLOC Connectorized+Integrated ODU (EU) C045070B018 ODU kit part numbers Order PTP 700 Connectorized+Integrated ODU kits from Cambium Networks (Table 5). Each of the parts listed in Table 5 includes the following items: ⢠One Connectorized+Integrated ODU. ⢠One integrated ODU mounting bracket (Figure 11). ⢠One AC+DC Power Injector PSU. ⢠One line cord, either US or EU as indicated. Table 5 ODU kit part numbers for Connectorized+Integrated ODUs Cambium description Cambium part number PTP 700 Connectorized+Integrated END (FCC) C045070H002 PTP 700 Connectorized+Integrated END - US Line Cord (Global) C045070H005 PTP 700 Connectorized+Integrated END - EU Line Cord (Global) C045070H008 PTP 700 Connectorized+Integrated END (EU) C045070H011 PTP 700 Lite Connectorized+Integrated END - US Line Cord (Global) C045070H014 ODU capability upgrades To upgrade a PTP 700 ODU to one or more new capabilities, order the necessary access keys from Cambium Networks (Table 6). For details of how to install the capability upgrades, refer to Generating license keys on page 6-3 and Software License Key page on page 6-11. Page 2-8 Chapter 2: System hardware Outdoor unit (ODU) Table 6 Capability upgrades available for PTP 700 Series ODUs Cambium description (*1) Part number PTP 700 128-bit AES Encryption â per END (*2) C000070K001A PTP 700 256-bit AES Encryption â per END (*2) C000070K002A PTP 700 Precise Network Timing Software License - per END C000070K003A PTP 700 Group Access Software License - per END C000070K004A PTP 700 FIPS 140-2 Upgrade including 128-bit AES - per END C000070K005A PTP 700 FIPS 140-2 Upgrade including 256-bit AES - per END C000070K006A PTP 700 Lite to Full Upgrade - per END C000070K008A PTP 650/700 8-Port T1/E1 Software License (per END). C000065K049A (*1) Order two upgrades per link. (*2) Cambium Networks will supply AES upgrades only if there is official permission to export AES encryption to the country of operation. ODU accessories Spare ODU port blanking plugs are available from Cambium Networks (Table 7). Table 7 ODU accessory part numbers Cambium description Cambium part number PTP 650/700 Series Blanking Plug Pack (Qty 10) N000065L036 ODU mounting brackets The integrated mounting bracket (Figure 11) and connectorized mounting bracket (Figure 12) are used to mount the PTP 700 ODUs on poles with diameters in the range 50 to 75 mm (2 to 3 inches). The extended integrated mounting bracket (Figure 13) is used for mounting an ODU on poles with a diameter of either 90 mm (3.5 inches) or 115 mm (4.5 inches). The large diameter extension kit (Figure 14) is be used with the integrated bracket to mount an ODU on a pole with diameter up to 229 mm (9.0 inches). Before ordering ODU mounting brackets, be aware of the following: ⢠Individual Connectorized+Integrated ODUs are supplied without a mounting bracket (Table 4). ⢠Individual Connectorized ODUs are supplied with a connectorized mounting bracket (Table 4). ⢠ODUs in kits are supplied with an integrated or connectorized bracket, as appropriate (Table 5). If separate ODU mounting brackets are required, order them from Cambium Networks (Table 8). Page 2-9 Chapter 2: System hardware Outdoor unit (ODU) Figure 11 ODU mounting bracket (integrated) Figure 12 ODU mounting bracket (connectorized) Page 2-10 Chapter 2: System hardware Outdoor unit (ODU) Figure 13 ODU extended integrated mounting bracket Figure 14 ODU large diameter extension kit Table 8 ODU mounting bracket part numbers Bracket Pole diameter ODU variants Bracket part number Mounting bracket (integrated) 40 mm to 82 mm (1.6 inches to 3.2 inches) PTP 700 Connectoized+Integrated N000065L031 Mounting bracket (connectorized) 40 mm to 82 mm (1.6 inches to 3.2 inches) PTP 700 Connectorized PTP 700 Connectoized+Integrated N000065L032 Extended integrated mounting bracket 89 mm OR 114 mm (3.5 inches OR 4.5 inches) PTP 700 Connectorized PTP 700 N000065L030 Page 2-11 Chapter 2: System hardware Bracket Outdoor unit (ODU) Pole diameter ODU variants Bracket part number Connectoized+Integrated Mounting bracket (integrated) with large diameter extension kit 89 mm to 229 mm (3.5 inches to 9.0 inches) PTP 700 Connectorized PTP 700 Connectoized+Integrated N000065L031 with N000065L042 ODU interfaces The PSU, AUX and SFP ports are on the rear of the ODUs (Figure 15). These interfaces are described in Table 9. Each of the PSU, AUX and SFP ports can be configured to disable Ethernet traffic, connected in a local loop-back between any two ports, or selected to the following services: ⢠Data Service ⢠Second Data Service ⢠Management Service ⢠Local Management Service Figure 15 ODU rear interfaces Table 9 ODU rear interfaces Port name Connector Interface Description Main PSU RJ45 POE input Proprietary power over Ethernet (POE). 100/1000BASE-T Ethernet Management and/or data. 100/1000BASE-T Ethernet with 802.3at compliant POE out capability Auxiliary Ethernet port which can be used, for example, to connect and power a video camera or wireless access point. Data and Management AUX RJ45 Page 2-12 Chapter 2: System hardware Port name Connector Outdoor unit (ODU) Interface Description Services. SFP SFP Optical or Copper Gigabit Ethernet Data and Management Services. Plug-in SFP module must be purchased separately. The front of the connectorized ODU (Figure 16) provides N type female connectors for RF cable interfaces to antennas with horizontal (H) and vertical (V) polarization. Figure 16 Connectorized ODU antenna interfaces Figure 17 Connectorized+Integrated ODU antenna interfaces Page 2-13 Chapter 2: System hardware Outdoor unit (ODU) ODU specifications The PTP 700 ODU conforms to the specifications listed in Table 10. Table 10 ODU specifications Category Specification Dimensions Connectorized+Integrated: 371 mm (14.6 in) x 371 mm (14.6 in) x 81 mm (3.2 in) Connectorized: 204 mm (8.0 in) x 318 mm (12.5 in) x 90 mm (3.5 in) Weight Connectorized+Integrated: Connectorized: 3.1 Kg (6.8 lbs) including bracket Temperature -40°C (-40°F) to +60°C (140°F) Wind loading 200 mph (323 kph) maximum. See ODU wind loading on page 3-14. Humidity 100% condensing Liquid and particle ingress IP66, IP67 UV exposure 10 year operational life (UL746C test evidence) Static discharge See Electromagnetic compatibility (EMC) compliance on page 4-22 Page 2-14 Chapter 2: System hardware Power supply units (PSU) Power supply units (PSU) PSU description The AC+DC Power Injector is an indoor unit that is connected to the ODU and network terminating equipment using Cat5e cable with RJ45 connectors. It is also plugged into an AC or DC power supply so that it can inject Power over Ethernet (POE) into the ODU. Choose one of the following PSUs (Figure 18): Figure 18 AC+DC Power Injector Caution The PSU ODU ports are designed to connect only to PTP 700 ODUs, PTP-SYNC units, NIDUs or LPUs. Do not connect any other equipment, as damage may occur. Do not connect the PIDU Plus PTP 300/500/600 Series to the PTP 700 ODU or LPU. Note Each of the ODU kits listed in Table 5 includes one PSU and one US or EU line cord as stated in the Cambium description. Page 2-15 Chapter 2: System hardware Power supply units (PSU) PSU part numbers Order PSUs and (for AC power) line cords from Cambium Networks (Table 11). Table 11 Power supply component part numbers Cambium description Cambium part number PTP 650/700 AC+DC Enhanced Power Injector C000065L002 US Line Cord Fig 8 N000065L003 UK Line Cord Fig 8 N000065L004 EU Line Cord Fig 8 N000065L005 Australia Line Cord Fig 8 N000065L006 AC+DC Enhanced Power Injector interfaces The AC+DC Enhanced Power Injector interfaces are shown in Figure 19 and described in Table 12. Figure 19 AC+DC Enhanced Power Injector interfaces Page 2-16 Chapter 2: System hardware Power supply units (PSU) Table 12 AC+DC Enhanced Power Injector interface functions Interface Function 100-240V 47-63Hz 1.5A AC power input (main supply). DC In Alternative DC power supply input. DC Out DC power output to a second PSU (for power supply redundancy) or to a NIDU. ODU RJ45 socket for connecting Cat5e cable to ODU. LAN RJ45 socket for connecting Cat5e cable to network. Power (green) LED Power supply detection Ethernet (yellow) LED Ethernet traffic detection PSU specifications The PTP 700 AC+DC Enhanced Power Injector conforms to the specifications listed in Table 13. Table 13 AC+DC Enhanced Power Injector specifications Category Specification Dimensions 250 mm (9.75 in) x 40 mm (1.5 in) x 80 mm (3 in) Weight 0.864 Kg (1.9 lbs) Temperature -40°C (-40°F) to +60°C (140°F) Humidity 0 to 90% non-condensing Waterproofing Not waterproof AC Input 90-264 V AC, 47-60 Hz Alternative DC Input 37-60 V DC DC Output Voltage For mains input: 58 V, +2V, -0V For DC input: Output voltage at maximum rated output current, not more than 1.5 V below the DC input voltage. Maximum length of DC output cable: 3 meters. AC Input connector IEC-320-C8 DC Output current 1.7A Efficiency Better than 84% Over Current Protection Hiccup current limiting, trip point set between 120% to 150% of full load current Page 2-17 Chapter 2: System hardware Power supply units (PSU) Category Specification Hold up time At least 20 milliseconds Power factor Better than 0.9 Page 2-18 Chapter 2: System hardware Antennas and antenna cabling Antennas and antenna cabling Antenna requirements Each connectorized ODU requires one external antenna (normally dual-polar), or if spatial diversity is required, each ODU requires two antennas. These antennas are not supplied by Cambium Networks. For connectorized units operating in the USA or Canada 4.9 GHz, 5.1 GHz, 5.2 GHz, 5.4 GHz or 5.8 GHz bands, choose external antennas from those listed in FCC and IC approved antennas on page 2-20. Do not install any other antennas. For links in other countries, the listed antennas are advisory, not mandatory. Note To determine when to install connectorized units and to calculate their impact on link performance and regulatory limits, see Planning for connectorized units on page 3-29. RF cable and connectors RF cable of generic type LMR-400 is required for connecting the ODU to the antenna. N type male connectors are required for connecting the RF cables to the connectorized ODU. Two connectors are required per ODU. Use weatherproof connectors, preferably ones that are supplied with adhesive lined heat shrink sleeves that are fitted over the interface between the cable and connector. Order CNT-400 RF cable and N type male connectors from Cambium Networks (Table 14). Table 14 RF cable and connector part numbers Cambium description Cambium part number 50 Ohm Braided Coaxial Cable - 75 meter 30010194001 50 Ohm Braided Coaxial Cable - 500 meter 30010195001 RF Connector, N, Male, Straight for CNT-400 Cable 09010091001 Note To select the correct connectors for the antenna end of the RF cable, refer to the antenna manufacturerâs instructions. Page 2-19 Chapter 2: System hardware Antennas and antenna cabling Antenna accessories Connectorized ODUs require the following additional components: ⢠Cable grounding kits: Order one cable grounding kit for each grounding point on the antenna cables. Refer to Lightning protection unit (LPU) and grounding kit on page 2-37 for specifications and part numbers. ⢠Self-amalgamating and PVC tape: Order these items to weatherproof the RF connectors. ⢠Lightning arrestors: When the connectorized ODU is mounted indoors, lightning arrestors (not PTP 700 LPUs) are required for protecting the antenna RF cables at building entry. One arrestor is required per antenna cable. One example of a compatible lightning arrestor is the Polyphaser LSXL-ME or LSXL (not supplied by Cambium Networks). FCC and IC approved antennas For connectorized units operating in the USA or Canada, choose external antennas from Table 15 (4.9 GHz), Table 16 (5.1 GHz â USA only), Table 17 (5.2 GHz), Table 18 (5.4 GHz) or Table 19 (5.8 GHz). These are approved by the FCC for use with the product and are constrained by the following limits for single- or dual-polarization parabolic dish antennas: ⢠4.9 GHz â 36.0 dBi per polarization or antenna. ⢠5.1 GHz - 34.5 dBi per polarization or antenna. ⢠5.2 GHz - 34.9 dBi per polarization or antenna. ⢠5.4 GHz - 34.9 dBi per polarization or antenna. ⢠5.8 GHz - 37.7 dBi per polarization or antenna. Details of the regulatory bands are provided in Table 52 on page 3-22. Caution Antennas not included in these tables are strictly prohibited for use with the PTP 700 in the specified bands. Caution This radio transmitter (IC certification number 109AO-50650) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Page 2-20 Chapter 2: System hardware Antennas and antenna cabling Antennes approuvĂŠes par la FCC et IC Pour les unitĂŠs sans antenne intĂŠgrĂŠe destinĂŠes aux Etats-Unis ou au Canada, choisissez des antennes externes dans la Table 15 (4.9 GHz), Table 16 (5.1 GHz â Etats-Unis), Table 17 (5.2 GHz), Table 18 (5.4 GHz) ou la Table 19 (5.8 GHz). Celles-ci sont approuvĂŠes par la FCC pour une utilisation avec le produit et sont limitĂŠes pour les antennes paraboliques a polarisation simple ou double comme suit: ⢠4.9 GHz â 36.0 dBi par polarisation ou l'antenne. ⢠5.1 GHz - 34.5 dBi par polarisation ou l'antenne. ⢠5.2 GHz - 34.9 dBi par polarisation ou l'antenne. ⢠5.4 GHz - 34.9 dBi par polarisation ou l'antenne. ⢠5.8 GHz - 37.7 dBi par polarisation ou l'antenne. Attention Les antennes qui ne sont pas listĂŠes dans ces tableaux sont strictement interdites dâutilisation avec le PTP 700 dans les bandes spĂŠcifiĂŠes Attention Le prĂŠsent ĂŠmetteur radio (NumĂŠro de certification IC 109AO-50650) a ĂŠtĂŠ approuvĂŠ par Industrie Canada pour fonctionner avec les types d'antenne ĂŠnumĂŠrĂŠs ci-dessous et ayant un gain admissible maximal et l'impĂŠdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supĂŠrieur au gain maximal indiquĂŠ, sont strictement interdits pour l'exploitation de l'ĂŠmetteur. Table 15 Antennas permitted for deployment in USA/Canada â 4.9 GHz Manufacturer Antenna type Nominal gain (dBi) Parabolic dish RadioWaves Radio Waves 6-foot Parabolic, SP6-5.2 36 RadioWaves Radio Waves 6-foot Dual-Pol Parabolic, SPD6-5.2 35.7 RDH4506B RadioWaves Radio Waves 6-foot Dual-Pol Parabolic, SPD6-4.7 35.6 RDH4502A RadioWaves Radio Waves 6-foot Parabolic, SP6-4.7 35.6 RadioWaves Radio Waves 6-foot Dual-Pol Parabolic, HPD6-5.2NS 35.6 RDH4511B RadioWaves Radio Waves 6-foot Dual-Pol Parabolic, HPD6-4.7 35.4 RDH4515A Page 2-21 Cambium part number Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Cambium part number RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, SPD4-4.7 32.6 RDH4501A RadioWaves Radio Waves 4-foot Parabolic, SP4-4.7 32.6 N000000D002A RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, SPD4-5.2 32.6 RDH4505B RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, HPD4-5.2NS 32.6 RDH4510B RadioWaves Radio Waves 4-foot Parabolic, SP4-5.2 32.6 RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, HPD4-4.7 32.4 RDH4516A RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, HPD3-5.2NS 32.3 RDH4509B RadioWaves Radio Waves 3-foot Parabolic, SP3-5.2 31.4 RDH4513B RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, SPD3-5.2 31.1 RDH4504B RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, SPD3-4.7 30 RDH4500A RadioWaves Radio Waves 3-foot Parabolic, SP3-4.7 30 N000000D005A RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, HPD3-4.7 29.8 RDH4517A Gabriel Gabriel 2.5-foot Standard Dual QuickFire Parabolic, QFD2.5-49-N 29.7 Gabriel Gabriel 2.5-foot Standard QuickFire Parabolic, QF2.5-49-N 29.7 RadioWaves Radio Waves 2-foot Parabolic, SP2-5.2 29 RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, HPD2-5.2NS 28.8 MTI MTI 2-foot Dual-Pol, MT-486013/N 28.5 MTI MTI 2-foot Single-Pol, MT-466009/N 28.5 RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, SPD2-5.2 28.1 Gabriel Gabriel 2-foot Standard Dual QuickFire Parabolic, QFD2-49-N 27.7 Page 2-22 RDH4508B RDH4503B Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Cambium part number Gabriel Gabriel 2-foot Standard QuickFire Parabolic, QF2-49-N 27.7 RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, SPD2-4.7 26.6 RDH4499A RadioWaves Radio Waves 2-foot Parabolic, SP2-4.7 26.6 N000000D001A RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, HPD2-4.7 26.4 RDH4518A MARS MA-WS54-50R Flat Plate (Dual-Pol) 23 Integrated Andrew Andrew 1.25-foot Flat Panel Dual, UBXP375-4-1 21 Andrew Andrew 1-foot Flat Panel Single, UBP3004-1 21 RadioWaves Radio Waves 1-foot Dual-Pol Parabolic, HPLPD1-4.7 20.8 RDH4519A MARS Small Form Factor Flat Plate Antenna MAEM56-DP19CM. 19 Integrated Laird 60 Sectorized (Dual-Pol) 17 Laird 90 Sectorized (Dual-Pol) 17 RadioWaves Radio Waves 90 Sectorized (Dual-Pol), SEC-47D-90-16 16 KPPA OMNI (Dual-Pol) 13 RadioWaves Radio Waves Omni Dual-Pol, OMND-4.8-9 N000000D003 Table 16 Antennas permitted for deployment in USA only â 5.1 GHz Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Cambium part number Andrew Andrew 4-foot Dual-Pol Parabolic, PX4F52 34.5 RDG4453B Andrew Andrew 4-foot Parabolic, P4F-52 34.5 RDH4524A Gabriel Gabriel 4-foot Standard QuickFire Parabolic, QF4-52-N 34.4 Gabriel Gabriel 4-foot Standard QuickFire Parabolic, QF4-52-N-RK 34.4 Page 2-23 Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish RadioWaves Radio Waves 4-foot Parabolic, SP4-5.2 34.4 Gabriel Gabriel 4-foot Standard Dual QuickFire Parabolic, QFD4-52-N 34.3 Gabriel Gabriel 4-foot Standard Dual QuickFire Parabolic, QFD4-52-N-RK 34.3 RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, HPD4-5.2NS 34.3 Gabriel Gabriel 4-foot High Performance QuickFire Parabolic, HQF4-52-N 34 RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, SPD4-5.2 34 Gabriel Gabriel 4-foot High Performance Dual QuickFire Parabolic, HQFD4-52-N 33.9 RFS RFS 4-foot HP Parabolic, SDF4-52AN 33.5 RFS RFS 4-foot Parabolic, SPF4-52AN 33.5 Andrew Andrew 3-foot Dual-Pol Parabolic, PX3F52 33 Andrew Andrew 3-foot Parabolic, P3F-52 33 StellaDoradus StellaDoradus 4-foot Single-Pol, 56 PSD113 32 RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, HPD3-5.2NS 31.9 RDH4509B RadioWaves Radio Waves 3-foot Parabolic, SP3-5.2 31 RDH4513B Gabriel Gabriel 2.5-foot Standard QuickFire Parabolic, QF2.5-52-N 30.8 Gabriel Gabriel 2.5-foot Standard Dual QuickFire Parabolic, QFD2.5-52-N 30.7 RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, SPD3-5.2 30.7 Andrew Andrew 2-foot Dual-Pol Parabolic, PX2F52 29 Andrew Andrew 2-foot Parabolic, P2F-52 29 MTI MTI 3-foot Single-Pol, MT-487000/N 28.6 RadioWaves Radio Waves 2-foot Parabolic, SP2-5.2 28.6 Page 2-24 Cambium part number RDH4510B RDH4505B RDH4504B Chapter 2: System hardware Manufacturer Antenna type RadioWaves Antennas and antenna cabling Nominal gain (dBi) Parabolic dish Cambium part number Radio Waves 2-foot Dual-Pol Parabolic, HPD2-5.2NS 28.4 RDH4508B Gabriel Gabriel 2-foot Standard QuickFire Parabolic, QF2-52-N 28.1 Gabriel Gabriel 2-foot Standard QuickFire Parabolic, QF2-52-N-RK 28.1 MTI MTI 2-foot Dual-Pol, MT-486013/N 28.1 MTI MTI 2-foot Single-Pol, MT-466009/N 28.1 Gabriel Gabriel 2-foot Standard Dual QuickFire Parabolic, QFD2-52-N 28 Gabriel Gabriel 2-foot Standard Dual QuickFire Parabolic, QFD2-52-N-RK 28 Gabriel Gabriel 2-foot High Performance QuickFire Parabolic, HQF2-52-N 27.8 Gabriel Gabriel 2-foot High Performance Dual QuickFire Parabolic, HQFD2-52-N 27.7 RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, SPD2-5.2 27.7 RFS RFS 2-foot Parabolic, SPF2-52AN 27.5 StellaDoradus StellaDoradus 2-foot Single-Pol, 56 PSD61 26.6 MARS MA-WS54-50R Flat Plate (Dual-Pol) 23 MTI MTI 15 inch Dual-Pol Flat Panel, MT485025/NVH 23 Andrew Andrew 1.25-foot Flat Panel Dual, UBXP375-4-1 20.6 Andrew Andrew 1-foot Flat Panel Single, UBP300-4-1 20.6 MARS Small Form Factor Flat Plate Antenna Part # MA-EM56-DP19CM. 19 Laird 60 Sectorized (Dual-Pol) 17 Laird 90 Sectorized (Dual-Pol) 17 KPPA OMNI (Dual-Pol) 13 Page 2-25 RDH4503B Integrated Integrated Chapter 2: System hardware Antennas and antenna cabling Table 17 Antennas permitted for deployment in USA/Canada â 5.2 GHz Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Cambium part number Andrew Andrew 4-foot Dual-Pol Parabolic, PX4F52 34.9 RDG4453B Andrew Andrew 4-foot Parabolic, P4F-52 34.9 RDH4524A Gabriel Gabriel 4-foot Standard QuickFire Parabolic, QF4-52-N 34.8 Gabriel Gabriel 4-foot Standard QuickFire Parabolic, QF4-52-N-RK 34.8 RadioWaves Radio Waves 4-foot Parabolic, SP4-5.2 34.8 Gabriel Gabriel 4-foot Standard Dual QuickFire Parabolic, QFD4-52-N 34.7 Gabriel Gabriel 4-foot Standard Dual QuickFire Parabolic, QFD4-52-N-RK 34.7 RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, HPD4-5.2NS 34.7 Gabriel Gabriel 4-foot High Performance QuickFire Parabolic, HQF4-52-N 34.4 RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, SPD4-5.2 34.4 Gabriel Gabriel 4-foot High Performance Dual QuickFire Parabolic, HQFD4-52-N 34.3 RFS RFS 4-foot HP Parabolic, SDF4-52AN 33.9 RFS RFS 4-foot Parabolic, SPF4-52AN 33.9 Andrew Andrew 3-foot Dual-Pol Parabolic, PX3F52 33.4 Andrew Andrew 3-foot Parabolic, P3F-52 33.4 StellaDoradus StellaDoradus 4-foot Single-Pol, 56 PSD113 32.4 RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, HPD3-5.2NS 32.3 RDH4509B RadioWaves Radio Waves 3-foot Parabolic, SP3-5.2 31.4 RDH4513B Gabriel Gabriel 2.5-foot Standard QuickFire Parabolic, QF2.5-52-N 31.2 Page 2-26 RDH4510B RDH4505B Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Gabriel Gabriel 2.5-foot Standard Dual QuickFire Parabolic, QFD2.5-52-N 31.1 RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, SPD3-5.2 31.1 Andrew Andrew 2-foot Dual-Pol Parabolic, PX2F52 29.4 Andrew Andrew 2-foot Parabolic, P2F-52 29.4 MTI MTI 3-foot Single-Pol, MT-487000/N 29 RadioWaves Radio Waves 2-foot Parabolic, SP2-5.2 29 RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, HPD2-5.2NS 28.8 Gabriel Gabriel 2-foot Standard QuickFire Parabolic, QF2-52-N 28.5 Gabriel Gabriel 2-foot Standard QuickFire Parabolic, QF2-52-N-RK 28.5 MTI MTI 2-foot Dual-Pol, MT-486013/N 28.5 MTI MTI 2-foot Single-Pol, MT-466009/N 28.5 Gabriel Gabriel 2-foot Standard Dual QuickFire Parabolic, QFD2-52-N 28.4 Gabriel Gabriel 2-foot Standard Dual QuickFire Parabolic, QFD2-52-N-RK 28.4 Gabriel Gabriel 2-foot High Performance QuickFire Parabolic, HQF2-52-N 28.2 Gabriel Gabriel 2-foot High Performance Dual QuickFire Parabolic, HQFD2-52-N 28.1 RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, SPD2-5.2 28.1 RFS RFS 2-foot Parabolic, SPF2-52AN 27.9 StellaDoradus StellaDoradus 2-foot Single-Pol, 56 PSD61 27 MARS MA-WS54-50R Flat Plate (Dual-Pol) 23 MTI MTI 15 inch Dual-Pol Flat Panel, MT485025/NVH 23 Page 2-27 Cambium part number RDH4504B RDH4508B RDH4503B Integrated Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Andrew Andrew 1.25-foot Flat Panel Dual, UBXP375-4-1 21 Andrew Andrew 1-foot Flat Panel Single, UBP300-4-1 21 MARS Small Form Factor Flat Plate Antenna MA-EM56-DP19CM. 19 Laird 60 Sectorized (Dual Pol) 17 Laird 90 Sectorized (Dual Pol) 17 KPPA OMNI (Dual-Pol) 13 Cambium part number Integrated Table 18 Antennas permitted for deployment in USA/Canada â 5.4 GHz Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Cambium part number Andrew Andrew 4-foot Dual-Pol Parabolic, PX4F-52 34.9 RDG4453B Andrew Andrew 4-foot Parabolic, P4F-52 34.9 RDH4524A Gabriel Gabriel 4-foot Standard QuickFire Parabolic, QF4-52-N 34.8 Gabriel Gabriel 4-foot Standard QuickFire Parabolic, QF4-52-N-RK 34.8 RadioWaves Radio Waves 4-foot Parabolic, SP4-5.2 34.8 Gabriel Gabriel 4-foot Standard Dual QuickFire Parabolic, QFD4-52-N 34.7 Gabriel Gabriel 4-foot Standard Dual QuickFire Parabolic, QFD4-52-N-RK 34.7 RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, HPD4-5.2NS 34.7 Gabriel Gabriel 4-foot High Performance QuickFire Parabolic, HQF4-52-N 34.4 RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, SPD4-5.2 34.4 Gabriel Gabriel 4-foot High Performance Dual QuickFire Parabolic, HQFD4-52-N 34.3 RFS RFS 4-foot HP Parabolic, SDF4-52AN 33.9 Page 2-28 RDH4510B RDH4505B Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish RFS RFS 4-foot Parabolic, SPF4-52AN 33.9 Andrew Andrew 3-foot Dual-Pol Parabolic, PX3F-52 33.4 Andrew Andrew 3-foot Parabolic, P3F-52 33.4 StellaDoradus StellaDoradus 4-foot Single-Pol, 56 PSD113 32.4 RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, HPD3-5.2NS 32.3 RDH4509B RadioWaves Radio Waves 3-foot Parabolic, SP3-5.2 31.4 RDH4513B Gabriel Gabriel 2.5-foot Standard QuickFire Parabolic, QF2.5-52-N 31.2 Gabriel Gabriel 2.5-foot Standard Dual QuickFire Parabolic, QFD2.5-52-N 31.1 RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, SPD3-5.2 31.1 Andrew Andrew 2-foot Dual-Pol Parabolic, PX2F-52 29.4 Andrew Andrew 2-foot Parabolic, P2F-52 29.4 MTI MTI 3-foot Single-Pol, MT-487000/N 29 RadioWaves Radio Waves 2-foot Parabolic, SP2-5.2 29 RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, HPD2-5.2NS 28.8 Gabriel Gabriel 2-foot Standard QuickFire Parabolic, QF2-52-N 28.5 Gabriel Gabriel 2-foot Standard QuickFire Parabolic, QF2-52-N-RK 28.5 MTI MTI 2-foot Dual-Pol, MT-486013/N 28.5 MTI MTI 2-foot Single-Pol, MT-466009/N 28.5 Gabriel Gabriel 2-foot Standard Dual QuickFire Parabolic, QFD2-52-N 28.4 Gabriel Gabriel 2-foot Standard Dual QuickFire Parabolic, QFD2-52-N-RK 28.4 Gabriel Gabriel 2-foot High Performance QuickFire Parabolic, HQF2-52-N 28.2 Page 2-29 Cambium part number RDH4504B RDH4508B Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Gabriel Gabriel 2-foot High Performance Dual QuickFire Parabolic, HQFD2-52-N 28.1 RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, SPD2-5.2 28.1 RFS RFS 2-foot Parabolic, SPF2-52AN 27.9 StellaDoradus StellaDoradus 2-foot Single-Pol, 56 PSD61 27 MARS MA-WS54-50R Flat Plate (Dual-Pol) 23 MTI MTI 15 inch Dual-Pol Flat Panel, MT485025/NVH 23 Andrew Andrew 1.25-foot Flat Panel Dual, UBXP375-4-1 21 Andrew Andrew 1-foot Flat Panel Single, UBP3004-1 21 MARS Small Form Factor Flat Plate Antenna MAEM56-DP19CM. 19 Laird 60 Sectorized (Dual-Pol) 17 Laird 90 Sectorized (Dual-Pol) 17 KPPA OMNI (Dual-Pol) 13 Cambium part number RDH4503B Integrated Integrated Table 19 Antennas permitted for deployment in USA/Canada â 5.8 GHz Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Gabriel Gabriel 6-foot Standard Dual QuickFire Parabolic, QFD6-52-N 37.7 Gabriel Gabriel 6-foot Standard QuickFire Parabolic, QF6-52-N 37.7 RadioWaves Radio Waves 6-foot Dual-Pol Parabolic, HPD6-5.2NS 37.7 RadioWaves Radio Waves 6-foot Parabolic, SP6-2/5 37.7 RadioWaves Radio Waves 6-foot Parabolic, SP6-5.2 37.7 Andrew Andrew 6-foot Dual-Pol Parabolic, PX6F-52 37.6 Andrew Andrew 6-foot Parabolic, P6F-52 37.6 Page 2-30 Cambium part number RDH4511B RDH4525A Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Cambium part number RadioWaves Radio Waves 6-foot Dual-Pol Parabolic, SPD6-5.2 37.5 RDH4506B Gabriel Gabriel 6-foot High Performance QuickFire Parabolic, HQF6-52-N 37.4 RFS RFS 6-foot HP Parabolic, SDF6-52AN 37.4 RFS RFS 6-foot Parabolic, SPF6-52AN 37.4 Gabriel Gabriel 6-foot High Performance Dual QuickFire Parabolic, HQFD6-52-N 37.3 Andrew Andrew 4-foot Dual-Pol Parabolic, PX4F-52 34.9 RDG4453B Andrew Andrew 4-foot Parabolic, P4F-52 34.9 RDH4524A Gabriel Gabriel 4-foot Standard QuickFire Parabolic, QF4-52-N 34.8 Gabriel Gabriel 4-foot Standard QuickFire Parabolic, QF4-52-N-RK 34.8 RadioWaves Radio Waves 4-foot Parabolic, SP4-5.2 34.8 Gabriel Gabriel 4-foot Standard Dual QuickFire Parabolic, QFD4-52-N 34.7 Gabriel Gabriel 4-foot Standard Dual QuickFire Parabolic, QFD4-52-N-RK 34.7 RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, HPD4-5.2NS 34.7 RadioWaves Radio Waves 4-foot Parabolic, SP4-2/5 34.6 Gabriel Gabriel 4-foot High Performance QuickFire Parabolic, HQF4-52-N 34.4 RadioWaves Radio Waves 4-foot Dual-Pol Parabolic, SPD4-5.2 34.4 Gabriel Gabriel 4-foot High Performance Dual QuickFire Parabolic, HQFD4-52-N 34.3 RFS RFS 4-foot HP Parabolic, SDF4-52AN 33.9 RFS RFS 4-foot Parabolic, SPF4-52AN 33.9 Andrew Andrew 3-foot Dual-Pol Parabolic, PX3F-52 33.4 Andrew Andrew 3-foot Parabolic, P3F-52 33.4 Page 2-31 RDH4510B RDH4505B Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish StellaDoradus StellaDoradus 4-foot Single-Pol, 56 PSD113 32.4 RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, HPD3-5.2NS 32.3 RadioWaves Radio Waves 3-foot Parabolic, SP3-2/5 31.4 RadioWaves Radio Waves 3-foot Parabolic, SP3-5.2 31.4 Gabriel Gabriel 2.5-foot Standard QuickFire Parabolic, QF2.5-52-N 31.2 Gabriel Gabriel 2.5-foot Standard Dual QuickFire Parabolic, QFD2.5-52-N 31.1 RadioWaves Radio Waves 3-foot Dual-Pol Parabolic, SPD3-5.2 31.1 Andrew Andrew 2-foot Dual-Pol Parabolic, PX2F-52 29.4 Andrew Andrew 2-foot Parabolic, P2F-52 29.4 MTI MTI 3-foot Single-Pol, MT-487000/N 29 RadioWaves Radio Waves 2-foot Parabolic, SP2-5.2 29 RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, HPD2-5.2NS 28.8 Gabriel Gabriel 2-foot Standard QuickFire Parabolic, QF2-52-N 28.5 Gabriel Gabriel 2-foot Standard QuickFire Parabolic, QF2-52-N-RK 28.5 MTI MTI 2-foot Dual-Pol, MT-486013/N 28.5 MTI MTI 2-foot Single-Pol, MT-466009/N 28.5 Gabriel Gabriel 2-foot Standard Dual QuickFire Parabolic, QFD2-52-N 28.4 Gabriel Gabriel 2-foot Standard Dual QuickFire Parabolic, QFD2-52-N-RK 28.4 RadioWaves Radio Waves 2-foot Parabolic, SP2-2/5 28.3 Gabriel Gabriel 2-foot High Performance QuickFire Parabolic, HQF2-52-N 28.2 Gabriel Gabriel 2-foot High Performance Dual QuickFire Parabolic, HQFD2-52-N 28.1 Page 2-32 Cambium part number RDH4509B RDH4513B RDH4504B RDH4508B Chapter 2: System hardware Antennas and antenna cabling Manufacturer Antenna type Nominal gain (dBi) Parabolic dish Cambium part number RadioWaves Radio Waves 2-foot Dual-Pol Parabolic, SPD2-5.2 28.1 RDH4503B RFS RFS 2-foot Parabolic, SPF2-52AN 27.9 StellaDoradus StellaDoradus 2-foot Single-Pol, 56 PSD61 27 MARS MA-WS54-50R Flat Plate (Dual-Pol) 23 MTI MTI 15 inch Dual-Pol Flat Panel, MT485025/NVH 23 RFS RFS 1-foot Flat Panel, MA0528-23AN 23 Andrew Andrew 1.25-foot Flat Panel Dual, UBXP375-4-1 21 Andrew Andrew 1-foot Flat Panel Single, UBP3004-1 21 MARS Small Form Factor Flat Plate Antenna MAEM56-DP19CM. 19 Laird 60 Sectorized (Dual-Pol) 17 Laird 90 Sectorized (Dual-Pol) 17 KPPA OMNI (Dual-Pol) 13 Page 2-33 Integrated Integrated Chapter 2: System hardware Ethernet cabling Ethernet cabling Ethernet standards and cable lengths All configurations require a copper Ethernet connection from the ODU (PSU port) to the PSU. Advanced configurations may also require one or both of the following: ⢠A copper Ethernet connection from the ODU (Aux port) to an auxiliary device. ⢠An optical or copper Ethernet connection from the ODU (SFP port) to network terminating equipment or a linked ODU. Table 20 specifies, for each type of PSU and power supply, the maximum permitted PSU drop cable length. Table 21 specifies, for Aux and copper SFP interfaces, the Ethernet standards supported and the maximum permitted drop cable lengths. Note For optical SFP interfaces, refer to SFP module kits on page 2-41 for details of the Ethernet standards supported and maximum permitted cable lengths. Table 20 PSU drop cable length restrictions Type of PSU installed Power supply to PSU Ethernet supported (*1) Power output to auxiliary device Maximum cable length (*2) AC+DC Enhanced power injector AC mains No (*3) No 300 m (990 ft) 48 V dc No (*3) No 300 m (990 ft) AC mains 100BASE-TX 1000BASE-T Yes 100 m (330 ft) 48 V dc 100BASE-TX 1000BASE-T Yes 100 m (330 ft) (*1) 10BASE-T is not supported by PTP 700. (*2) Maximum length of Ethernet cable from ODU to network terminating equipment via PSU. (*3) Ethernet is provided via optical SFP interface. Page 2-34 Chapter 2: System hardware Ethernet cabling Table 21 Aux and copper SFP Ethernet standards and cable length restrictions ODU drop cable Power over Ethernet Ethernet supported (*1) Maximum cable length (*2) Aux â auxiliary device POE to auxiliary device 100BASE-TX 1000BASE-T 100 m (330 ft) None 100BASE-TX 100 m (330 ft) None 100BASE-TX 100 m (330 ft) SFP (copper) â linked device (*1) 10BASE-T is not supported by PTP 700. (*2) Maximum length of Ethernet cable from the ODU to the linked device. Outdoor copper Cat5e Ethernet cable For copper Cat5e Ethernet connections from the ODU to the PSU, LPUs and other devices, use Cat5e cable that is gel-filled and shielded with copper-plated steel, for example Superior Essex type BBDGe. This is known as âdrop cableâ (Figure 20). Caution Always use Cat5e cable that is gel-filled and shielded with copper-plated steel. Alternative types of drop cable are not supported by Cambium Networks. Order Superior Essex type BBDGe cable from Cambium Networks (Table 22). Other lengths of this cable are available from Superior Essex. Figure 20 Outdoor drop cable Page 2-35 Chapter 2: System hardware Ethernet cabling Table 22 Drop cable part numbers Cambium description Cambium part number 1000 ft Reel Outdoor Copper Clad CAT5E WB3175 328 ft (100 m) Reel Outdoor Copper Clad CAT5E WB3176 Cable grounding kit Copper drop cable shields must be bonded to the grounding system in order to prevent lightning creating a potential difference between the structure and cable, which could cause arcing, resulting in fire risk and damage to equipment. Optical cables do not require grounding. One grounding kit (Figure 21) is required for each grounding point on the PSU, Aux and copper SFP drop cables. Order cable grounding kits from Cambium Networks (Figure 30). Caution To provide adequate protection, all grounding cables must be a minimum size of 10 mm2 csa (8AWG), preferably 16 mm2 csa (6AWG), or 25 mm2 csa (4AWG). Figure 21 Cable grounding kit Table 23 Cable grounding kit part numbers Cambium description Cambium part number Cable Grounding Kits For 1/4" And 3/8" Cable 01010419001 Page 2-36 Chapter 2: System hardware Ethernet cabling Lightning protection unit (LPU) and grounding kit PTP 700 LPUs provide transient voltage surge suppression for PTP 700 installations. Each PSU or Aux drop cable requires two LPUs, one near the ODU and the other near the linked device, usually at the building entry point (Table 24). Table 24 LPU and grounding kit contents Lightning protection units (LPUs) LPU grounding point nuts and washers ODU to top LPU drop cable (600 mm) EMC strain relief cable glands U-bolts, nuts and washers for mounting LPUs ODU to top LPU ground cable (M6-M6) Bottom LPU ground cable (M6-M10) ODU to ground cable (M6-M10 Page 2-37 Chapter 2: System hardware Ethernet cabling One LPU and grounding kit (Table 24) is required for the PSU drop cable connection to the ODU. If the ODU is to be connected to an auxiliary device, one additional LPU and grounding kit is required for the Aux drop cable. Order the kits from Cambium Networks (Table 25). Table 25 LPU and grounding kit part number Cambium description Cambium part number PTP 650/700 LPU and Grounding Kit (One Kit Per End) C000065L007 Note PTP 700 LPUs are not suitable for installation on SFP copper Cat5e Ethernet interfaces. For SFP drop cables, obtain suitable surge protectors from a specialist supplier. SFP optical Ethernet interfaces do not require surge protectors. LPU for GPS drop cables When a GPS receiver is the timing reference source for PTP-SYNC (optional), an LPU must be installed near the point at which the GPS drop cable enters the building. A single LPU from the PTP 650/700 LPU and Grounding Kit (C000065L007) (Table 24) is suitable. Alternatively, the single LPU kit for PTP 250/300/500 (Figure 22) could be used. Figure 22 LPU kit used for GPS receiver drop cables Page 2-38 Chapter 2: System hardware Ethernet cabling Table 26 LPU and grounding kit part number â Use with GPS receiver drop cable only Cambium description Cambium part number LPU End Kit PTP 250/300/500 WB2978 RJ45 connectors and spare glands RJ45 connectors are required for plugging Cat5e cables into ODUs, LPUs, PSUs and other devices. Order RJ45 connectors and crimp tool from Cambium Networks (Table 27). Note The RJ45 connectors and crimp tool listed in Table 27 work with Superior Essex type BBDGe cable (as supplied by Cambium Networks). They may not work with other types of cable. The ODU is supplied with one environmental sealing gland for the drop cable. However, this is not suitable when surge protection is required: EMC glands must be used instead. EMC strain relief cable glands (quantity 5) are included in the LPU and grounding kit (Figure 23). These are identified with a black sealing nut. If extra glands are required, order them from Cambium Networks (in packs of 10) (Table 27). One long EMC strain relief gland (Figure 27) is included in each SFP module kit. This is longer than the standard cable gland as it must house an SFP module plugged into the ODU. Figure 23 Cable gland Table 27 RJ45 connector and spare gland part numbers Cambium description Cambium part number Tyco/AMP, Mod Plug RJ45, 100 pack WB3177 Tyco/AMP Crimp Tool WB3211 RJ-45 Spare Grounding Gland - PG16 size (Qty. 10) N000065L033 Page 2-39 Chapter 2: System hardware Ethernet cabling Cable hoisting grip One or more grips are required for hoisting the drop cable up to the ODU without damaging the gland or RJ45 plug (Figure 24). They are not supplied by Cambium Networks. Figure 24 Cable hoisting grip Drop cable tester The drop cable tester is an optional item for testing the resistances between the RJ45 pins of the drop cable (Figure 25). Order it by completing the order form on the support website (see Contacting Cambium Networks on page 1). Figure 25 Drop cable tester Indoor Cat5e cable To connect the PSU to network terminating equipment, use indoor Cat5e cable. The ODU network connection implements automatic MDI/MDI-X sensing and pair swapping, allowing connection to networking equipment that requires cross-over cables (MDI-X networks) or straight-through cables (MDI Networks). Page 2-40 Chapter 2: System hardware Ethernet cabling SFP module kits SFP module kits allow connection of a PTP 700 Series ODU to a network over a Gigabit Ethernet interface in one of the following full-duplex modes: ⢠Optical Gigabit Ethernet: 1000BASE-LX or 1000BASE-SX ⢠Copper Gigabit Ethernet: 100BASE-TX or 1000BASE-T Order SFP module kits from Cambium Networks (Table 28). Table 28 SFP module kit part numbers Cambium description Cambium part number Single Mode Optical SFP Interface per ODU C000065L008 Multi-mode Optical SFP Interface per ODU C000065L009 Gig-Ethernet SFP Interface per ODU C000065L010 To compare the capabilities of the two optical SFP modules, refer to Table 29 and Table 30. Table 29 Optical 1000BASE-LX Ethernet SFP Module (part number C000065L008) Core/ cladding (microns) Mode Bandwidth at 1310 nm (MHz/km) Maximum length of optical interface Insertion loss (dB) 62.5/125 Multi 500 550 m (1800 ft) 1.67 50/125 Multi 400 550 m (1800 ft) 0.07 50/125 Multi 500 550 m (1800 ft) 1.19 10/125 Single N/A 5000 m (16400 ft) 0.16 Table 30 Optical 1000BASE-SX Ethernet SFP Module (part number C000065L009) Core/ cladding (microns) Mode Bandwidth at 850 nm (MHz/km) Maximum length of optical interface Insertion loss (dB) 62.5/125 Multi 160 220 m (720 ft) 2.38 62.5/125 Multi 200 275 m (900 ft) 2.6 50/125 Multi 400 500 m (1640 ft) 3.37 50/125 Multi 500 550 m (1800 ft) 3.56 Page 2-41 Chapter 2: System hardware Ethernet cabling The upgrade kits contain the following components: ⢠Optical or copper SFP transceiver module (Figure 26) ⢠Long EMC strain relief cable gland (Figure 27) ⢠The PTP 700 Series SFP Interface Upgrade Guide ⢠License key instructions and unique Access Key Figure 26 Optical or copper SFP transceiver module Figure 27 Long cable gland Note PTP 700 does not support the Synchronous Ethernet or 1588 Transparent Clock features using copper SFP transceivers. Page 2-42 Chapter 2: System hardware Ethernet cabling Optical cable and connectors Order an optical cable with LC connectors from a specialist fabricator, quoting the specification shown in Figure 28. It must be the correct length to connect the ODU to the other device. LC connectors should be supplied with dust caps to prevent dust build up. Figure 28 Optical optic cable and connector specification Page 2-43 Chapter 2: System hardware PTP-SYNC unit PTP-SYNC unit PTP-SYNC unit description The PTP-SYNC unit (Figure 29) is an optional component. It is required when TDD synchronization is implemented using PTP-SYNC. It measures the difference between the TDD frame timing and a 1 Hz timing reference, and signals this time difference to the ODU. For more information on this feature, refer to TDD synchronization on page 1-18. The PTP-SYNC unit is powered using standard power-over-Ethernet from the PSU. One PTP-SYNC unit is required for each synchronized link. The PTP-SYNC unit is a compact indoor unit mounted on a wall, shelf or (using an optional rack mounting adaptor) in a standard 19 inch rack (Figure 30). Figure 29 PTP-SYNC kit Figure 30 PTP-SYNC rack mounting adapter Page 2-44 Chapter 2: System hardware PTP-SYNC unit PTP-SYNC part numbers Order PTP-SYNC kits and associated components from Cambium Networks (Table 31). Table 31 PTP-SYNC component part numbers Cambium description Cambium part number PTP-SYNC kit WB3665 PTP800 CMU / PTP-SYNC 19â rack mount installation kit WB3486 The PTP-SYNC kit contains: ⢠1 x PTP-SYNC unit ⢠1 x M4 pan screw ⢠2 x M4 washers ⢠2 x M3 (6mm) torx drive screws ⢠1 x lug for unit ground (cable not supplied) ⢠1 x Cat5e cable (length 1 meter) ⢠Installation guide If the 1 meter Cat5e cable supplied with the PTP-SYNC kit is not long enough, order a longer length of Cat5e cable, up to 2 meters long. The PTP-SYNC rack mount kit contains: ⢠1 x rack bracket ⢠8 x M3 washers ⢠8 x M3 screws ⢠1 x rack mount blank plate ⢠8 x M5 nuts ⢠8 x M5 washers ⢠2 x rack handles Page 2-45 Chapter 2: System hardware PTP-SYNC unit PTP-SYNC unit interfaces The PTP-SYNC front panel is illustrated in Figure 31. The annotated interfaces are described in Table 32 and Table 33. Figure 31 PTP-SYNC front panel Table 32 PTP-SYNC interface functions Description Function GPS/SYNC IN Input from GPS receiver or from the daisy-chained SYNC OUT signal of another PTP-SYNC. SYNC OUT Output to daisy-chained PTP-SYNC units. USB Input for software upgrades. Contact Cambium for instructions. 1PPS IN Coaxial alternative to GPS/SYNC IN. Peak input voltage must not exceed 5 V. LED bank LEDs and their functions are described in Table 33. PIDU IN Input from PSU. ODU OUT Output to ODU. Ground stud For connecting to a ground point. Table 33 PTP-SYNC LED functions LED Function GPS GPS satellite data detection. SYNC SYNC OUT port data detection. STATUS Power and satellite lock detection. ODU ODU signal detection. For a full list of LED states and fault-finding actions, refer to Testing PTP-SYNC on page 8-15. Page 2-46 Chapter 2: System hardware PTP-SYNC unit PTP-SYNC specifications The PTP-SYNC unit conforms to the specifications listed in Table 34, Table 35 and Table 36. Table 34 PTP-SYNC unit physical specifications Category Specification Dimensions Width excluding ears 174 mm (6.69 in) Width including ears 196 mm (7.54 in) Height 31.5 mm (1.21 in) Depth 79 mm (3.04 in) Weight 0.485 Kg (1.1 lbs) Table 35 PTP-SYNC unit environmental specifications Category Specification Temperature -40°C (-40°F) to +60°C (140°F) Suitable for use indoors, or outdoors within a weatherproofed cabinet. Humidity 0 to 95% non-condensing Waterproofing Not waterproof Table 36 PTP-SYNC unit electrical specifications Category Specification Power supply Integrated with PSU Power consumption 1.5 W max (extra power is required to supply a GPS receiver) Page 2-47 Chapter 2: System hardware PTP-SYNC unit There are two timing inputs to the PTP-SYNC unit: GPS/SYNC IN (RJ-45) (Table 37) and 1PPS IN (SMA) (Table 38). Table 37 PTP-SYNC unit timing specifications - GPS/SYNC IN (RJ-45) Category Specification Signal type Differential 1 Hz signal Common mode range â7 V to +7 V, relative to GPS/SYNC IN pin 2 (ground) Maximum differential voltage Âą5 V Threshold Âą0.4 V Impedance 90 ohms to 110 ohms Pulse width 1 Îźs to 500 ms Polarity Reference edge is when pin 3 (PPSA) is positive with respect to pin 6 (PPSB) Table 38 PTP-SYNC unit timing specifications - 1PPS IN (SMA) Category Specification Signal type 1 Hz signal Pulse Positive pulse, reference edge is rising edge Maximum voltage 5V Threshold 0.4 V to 0.6 V Input impedance 45 ohms to 55 ohms Pulse width 1Îźs to 500ms Page 2-48 Chapter 2: System hardware PTP-SYNC unit The pinouts of the PTP-SYNC unit GPS/SYNC IN port are specified in Table 39. Table 39 GPS/SYNC IN port pinouts Pin no. Connector pinout signal name Signal description Pin 1 12VGPS 12 V output to GPS receiver module, 250 mA max Pin 2 GND Ground Pin 3 GPS_1PPSA 1 Hz pulse input Pin 4 GPS_RXDA GPS receive data Pin 5 GPS_RXDB GPS receive data Pin 6 GPS_1PPSB 1 Hz pulse input Pin 7 GPS_TXDA GPS transmit data Pin 8 GPS_TXDB GPS transmit data Note The GPS_1PPS, GPS_RXD and GPS_TXD signals conform to International Telecommunication Union (ITU) recommendation V.11 (RS422) Signal polarities A 1 PPS timing datum is detected when GPS_1PPSA goes positive relative to GPS_1PPSB. A serial data start bit is detected when GPS_RXDA (or GPS_TXDA) goes positive relative to GPS_RXDB (or GPS_TXDB). Page 2-49 Chapter 2: System hardware GPS receiver GPS receiver GPS receiver description The GPS receiver (Figure 32) is an optional timing reference source for PTP-SYNC. It provides a 1 Hz signal, accurately synchronized in frequency and phase across the network. Figure 32 GPS receiver The GPS receiver is supplier with a GPS adapter cable kit (Figure 33). This avoids the need to fit a 12 way circular connector to the GPS drop cable. The kit contains one adapter cable (GPS receiver circular connector to RJ45 socket) and one RJ45 plug housing. Figure 33 GPS adapter cable kit Page 2-50 Chapter 2: System hardware GPS receiver GPS receiver part numbers Order GPS receivers and associated components from Cambium Networks (Table 40). Table 40 GPS receiver component part numbers Cambium description Cambium part number Trimble Acutimeâ˘GG GPS receiver WB4141 PTP-SYNC <-> Trimble Adapter Cable (*1) WB3961 1000 ft Reel Outdoor Copper Clad CAT5E (*2) WB3175 328 ft (100 m) Reel Outdoor Copper Clad CAT5E (*2) WB3176 Tyco/AMP, Mod Plug RJ45, 100 pack (*3) WB3177 Tyco/AMP Crimp Tool (*3) WB3211 Cable Grounding Kits For 1/4" And 3/8" Cable (*4) 01010419001 LPU End Kit PTP 250/300/500 (*5) WB2978D (*1) This adapter cable is included with the GPS receiver (part number WB4141). (*2) Other lengths of this BBDGe drop cable are available from Superior Essex. (*3) The RJ45 connectors and crimp tool only work with Superior Essex type BBDGe cable. (*4) One grounding kit is required per drop cable grounding point. (*5) One LPU kit is required per GPS receiver. Twelve way circular connector As an alternative to the GPS adapter cable, the drop cable can be connected directly to the GPS unit via a 12 way circular connector, using the components and tools listed in Table 41. Table 41 Recommended outdoor connectors for Trimble GPS receiver Item Manufacturer Part number 12 way circular connector Deutsch IMC26-2212X Size 22 crimp socket Deutsch 6862-201-22278 Crimp tool Daniels Manufacturing Corp MH860 Positioner Daniels Manufacturing Corp 86-5 Insertion / extraction tool Deutsch 6757-201-2201 Adaptor Deutsch IMC2AD Self amalgamating tape Page 2-51 Chapter 2: System hardware Network indoor unit (NIDU) Network indoor unit (NIDU) NIDU description The NIDU (Figure 34) is an optional component that adds up to eight TDM channels (E1 or T1) to a PTP 700 link. It multiplexes and demultiplexes E1, T1 and Ethernet data over the wireless bridge. The NIDU is an indoor unit that is connected to the PSU (via the ODU port), to network terminating equipment (via the LAN port) and to up to eight E1 or T1 channels (via the E1/T1 ports) using Cat5e cable with RJ45 connectors. It requires a 48V to 60V DC power supply, either from the PTP 700 AC+DC Enhanced Power Injector, the PTP 800 AC-DC Power Supply Converter or another source. Figure 34 NIDU Note To enable E1 or T1 capability over a PTP 700 link, purchase one access key for each link end from Cambium Networks (ODU capability upgrades on page 2-8). Page 2-52 Chapter 2: System hardware Network indoor unit (NIDU) NIDU part numbers Order NIDUs and associated components from Cambium Networks (Table 42). Table 42 NIDU component part numbers Cambium description Cambium part number Network Indoor Unit (One per END) C000065L043 NIDU - DC Power Connector Spare (10 pack) C000065L044 CMU/PTP-SYNC/NIDU 19inch Rack Mount Installation Kit WB3486 PTP 800 AC-DC Power Supply Converter (*) WB3622 (*) Optional DC power supply for the NIDU. NIDU interfaces The NIDU interfaces are shown in Figure 35 and described in Table 43. Figure 35 NIDU interfaces Table 43 NIDU interface functions Interface Function 40 â 60V DC Port 1: DC power input from an independent source or from the AC+DC Enhanced Power Injector. Port 2: Backup power input. The kit includes one four-pin DC connector. LAN Gigabit Ethernet RJ45 socket for connecting to network terminating equipment. Use LAN port 1; port 2 is provided for future expansion. ODU Gigabit Ethernet RJ45 socket for connecting to the PSU (and so on to the ODU). Use ODU port 3; port 4 is provided for future expansion. E1/T1 RJ45 sockets for connecting to up to eight E1 or T1 channels. Allocate ports to channels in ascending order (1 to 8). 1PPS IN Not used. Provided for future expansion. For a full list of LED states and fault-finding actions, refer to Testing a TDM link on page 8-18. Page 2-53 Chapter 2: System hardware Network indoor unit (NIDU) NIDU specifications The NIDU conforms to the specifications listed in Table 44. Table 44 NIDU specifications Category Specification Dimensions Width 172 mm (6.8 in) Height 32 mm (1.3 in) Depth 218 mm (8.6 in) Weight 0.88 kg (1.95 lb) Temperature -40°C (-40°F) to +60°C (+140°F) Suitable for use indoors, or outdoors within a weatherproofed cabinet. Humidity 0 to 95%, nonâcondensing Waterproofing Not waterproof DC Input +48 V to +60 V DC Power consumption <8 W The NIDU TDM interface conforms to the standards listed in TDM network planning on page 3-48. The pinouts of the NIDU ports are specified in Table 45, Table 46 and Table 47. Table 45 NIDU LAN port pinouts Pin no. Connector pinout signal name (*) Signal description Pin 1 LAN_PHYn_PAIR1+ Gigabit tx/rx pair 1 Pin 2 LAN_PHYn_PAIR1- Gigabit tx/rx pair 1 Pin 3 LAN_PHYn_PAIR2+ Gigabit tx/rx pair 2 Pin 4 LAN_PHYn_PAIR3+ Gigabit tx/rx pair 3 Pin 5 LAN_PHYn_PAIR3- Gigabit tx/rx pair 3 Pin 6 LAN_PHYn_PAIR2- Gigabit tx/rx pair 2 Pin 7 LAN_PHYn_PAIR4+ Gigabit tx/rx pair 4 Pin 8 LAN_PHYn_PAIR4- Gigabit tx/rx pair 4 (*) ânâ refers to the LAN port number (1 or 2). Page 2-54 Chapter 2: System hardware Network indoor unit (NIDU) Table 46 NIDU ODU port pinouts Pin no. Connector pinout signal name (*) Signal description Pin 1 ODU_PHYn_PAIR1+ Gigabit tx/rx pair 1 Pin 2 ODU_PHYn_PAIR1- Gigabit tx/rx pair 1 Pin 3 ODU_PHYn_PAIR2+ Gigabit tx/rx pair 2 Pin 4 ODU_PHYn_PAIR3+ Gigabit tx/rx pair 3 Pin 5 ODU_PHYn_PAIR3- Gigabit tx/rx pair 3 Pin 6 ODU_PHYn_PAIR2- Gigabit tx/rx pair 2 Pin 7 ODU_PHYn_PAIR4+ Gigabit tx/rx pair 4 Pin 8 ODU_PHYn_PAIR4- Gigabit tx/rx pair 4 (*) ânâ refers to the ODU port number (3 or 4). Table 47 NIDU E1/T1 port pinouts Pin no. Connector pinout signal name (*) Signal description Pin 1 RJ_RRINGn Receive signal Pin 2 RJ_RTIPn Receive signal Pin 3 Not used Pin 4 RJ_TRINGn Transmit signal Pin 5 RJ_TTIPn Transmit signal Pin 6 Not used Pin 7 Not used Pin 8 Not used (*) ânâ refers to the E1/T1 port number (1 to 8). Page 2-55 Chapter 3: System planning This chapter provides information to help the user to plan a PTP 700 link. The following topics are described in this chapter: ⢠Typical deployment on page 3-2 contains diagrams illustrating typical PTP 700 site deployments. ⢠Site planning on page 3-11 describes factors to be considered when planning the proposed link end sites, including grounding, lightning protection and equipment location. ⢠Radio spectrum planning on page 3-21 describes how to plan PTP 700 links to conform to the regulatory restrictions that apply in the country of operation. ⢠Link planning on page 3-25 describes factors to be taken into account when planning links, such as range, path loss and throughput. ⢠Planning for connectorized units on page 3-29 describes factors to be taken into account when planning to use connectorized ODUs with external antennas in PTP 700 links. ⢠Configuration options for TDD synchronization on page 3-31 describes the different configuration options that may be used for implementing TDD synchronization in the PTP 700 Series. ⢠Data network planning on page 3-35 describes factors to be considered when planning PTP 700 data networks. ⢠TDM network planning on page 3-48 describes factors to be considered when planning PTP 700 TDM networks. ⢠Network management planning on page 3-49 describes how to plan for PTP 700 links to be managed remotely using SNMP. ⢠Security planning on page 3-51 describes how to plan for PTP 700 links to operate in secure mode. ⢠System threshold, output power and link loss on page 3-60 contains tables that specify the system threshold (dBm), output power (dBm) and maximum link loss (dB) per channel bandwidth and modulation mode. ⢠Data throughput capacity tables on page 3-71 contains tables and graphs to support calculation of the data rate capacity that can be provided by PTP 700 configurations. Page 3-1 Chapter 3: System planning Typical deployment Typical deployment This section contains diagrams illustrating typical PTP 700 site deployments. ODU with POE interface to PSU In the basic configuration, there is only one Ethernet interface, a copper Cat5e power over Ethernet (POE) from the PSU to the ODU (PSU port), as shown in the following diagrams: mast or tower installation (Figure 36 ), wall installation (Figure 37) and roof installation (Figure 38). Figure 36 Mast or tower installation Page 3-2 Chapter 3: System planning Typical deployment Figure 37 Wall installation Page 3-3 Chapter 3: System planning Typical deployment Figure 38 Roof installation Page 3-4 Chapter 3: System planning Typical deployment E1 or T1 interfaces There may be up to eight E1 or T1 channels connected to the ODU via the PSU port, as shown in Figure 39. The NIDU is not compatible with the SFP or AUX ports. Figure 39 ODU with E1 or T1 interfaces Page 3-5 Chapter 3: System planning Typical deployment SFP and Aux Ethernet interfaces There may be one or two additional Ethernet interfaces connected to the ODU: one to the SFP port (copper or optical) and one to the Aux port, as shown in the following diagrams: ⢠ODU with copper SFP and PSU interfaces â Figure 40 ⢠ODU with optical SFP and PSU interfaces â Figure 41 ⢠ODU with Aux and PSU interfaces â Figure 42 Figure 40 ODU with copper SFP and PSU interfaces Page 3-6 Chapter 3: System planning Typical deployment Figure 41 ODU with optical SFP and PSU interfaces Page 3-7 Chapter 3: System planning Typical deployment Figure 42 ODU with Aux and PSU interfaces Page 3-8 Chapter 3: System planning Typical deployment GPS receiver interfaces If a GPS receiver is deployed for PTP-SYNC, it may be mounted on the wall of the equipment building (Figure 43) (preferred option), or on a metal tower or mast (Figure 44). Figure 43 GPS receiver wall installation Page 3-9 Chapter 3: System planning Typical deployment Figure 44 GPS receiver tower or mast installation Page 3-10 Chapter 3: System planning Site planning Site planning This section describes factors to be considered when planning the proposed link end sites, including grounding, lightning protection and equipment location for the ODU, PSU and PTPSYNC unit (if installed). Grounding and lightning protection Warning Electro-magnetic discharge (lightning) damage is not covered under warranty. The recommendations in this guide, when followed correctly, give the user the best protection from the harmful effects of EMD. However 100% protection is neither implied nor possible. Structures, equipment and people must be protected against power surges (typically caused by lightning) by conducting the surge current to ground via a separate preferential solid path. The actual degree of protection required depends on local conditions and applicable local regulations. To adequately protect a PTP 700 installation, both ground bonding and transient voltage surge suppression are required. Full details of lightning protection methods and requirements can be found in the international standards IEC 61024-1 and IEC 61312-1, the U.S. National Electric Code ANSI/NFPA No. 70-1984 or section 54 of the Canadian Electric Code. Note International and national standards take precedence over the requirements in this guide. Lightning protection zones Use the rolling sphere method (Figure 45) to determine where it is safe to mount equipment. An imaginary sphere, typically 50 meters in radius, is rolled over the structure. Where the sphere rests against the ground and a strike termination device (such as a finial or ground bar), all the space under the sphere is considered to be in the zone of protection (Zone B). Similarly, where the sphere rests on two finials, the space under the sphere is considered to be in the zone of protection. Page 3-11 Chapter 3: System planning Site planning Figure 45 Rolling sphere method to determine the lightning protection zones Zone A: In this zone a direct lightning strike is possible. Do not mount equipment in this zone. Zone B: In this zone, direct EMD (lightning) effects are still possible, but mounting in this zone significantly reduces the possibility of a direct strike. Mount equipment in this zone. Warning Never mount equipment in Zone A. Mounting in Zone A may put equipment, structures and life at risk. Site grounding system Confirm that the site has a correctly installed grounding system on a common ground ring with access points for grounding PTP 700 equipment. If the outdoor equipment is to be installed on the roof of a high building (Figure 38), confirm that the following additional requirements are met: ⢠A grounding conductor is installed around the roof perimeter to form the main roof perimeter lightning protection ring. ⢠Air terminals are installed along the length of the main roof perimeter lightning protection ring, typically every 6.1m (20ft). ⢠The main roof perimeter lightning protection ring contains at least two down conductors connected to the grounding electrode system. The down conductors should be physically separated from one another, as far as practical. Page 3-12 Chapter 3: System planning Site planning ODU and external antenna location Find a location for the ODU (and external antenna for connectorized units) that meets the following requirements: ⢠The equipment is high enough to achieve the best radio path. ⢠People can be kept a safe distance away from the equipment when it is radiating. The safe separation distances are defined in Calculated distances on page 4-24. ⢠The equipment is lower than the top of the supporting structure (tower, mast or building) or its lightning air terminal. ⢠If the ODU is connectorized, select a mounting position that gives it maximum protection from the elements, but still allows easy access for connecting and weatherproofing the cables. To minimize cable losses, select a position where the antenna cable lengths can be minimized. If diverse or two external antennas are being deployed, it is not necessary to mount the ODU at the midpoint of the antennas. ODU ambient temperature limits Select a location where the ODU can operate within safe ambient temperature limits. The ODU must be mounted in a Restricted Access Location (as defined in EN 60950-1) if the operating ambient temperature may exceed 40°C, including solar radiation. If the ambient temperature never exceeds 40°C, the temperature of the external metal case parts of the ODU will not exceed the touch temperature limit of 70°C. If the ambient temperature never exceeds 60°C, the temperature of the external metal case parts of the ODU will not exceed the touch temperature limit of 90°C. Note A restricted access location is defined (in EN 60950-1) as one where access may only be gained by use of a tool or lock and key, or other means of security, and access is controlled by the authority responsible for the location. Access must only be gained by persons who have been instructed about the reasons for the restrictions applied to the location and about any precautions that must be taken. Examples of permissible restricted access locations are a lockable equipment room or a lockable cabinet. Page 3-13 Chapter 3: System planning Site planning ODU wind loading Ensure that the ODU and the structure on which it is mounted are capable of withstanding the prevalent wind speeds at a proposed PTP 700 site. Wind speed statistics should be available from national meteorological offices. The ODU and its mounting bracket are capable of withstanding wind speeds of up to 325 kph (200 mph). Wind blowing on the ODU will subject the mounting structure to significant lateral force. The magnitude of the force depends on both wind strength and the variant of the ODU. Wind loading is estimated using the following formulae: ⢠Force (in newtons) = 0.5 Ă Ď Ă V2 Ă A Ă Cd âĎâ is the density of air = 1.225 kg/m3, âVâ is the wind speed in meters per second, âAâ is the projected surface area of the ODU in square meters, and âCdâ is the drag coefficient = 1.385. The drag coefficient has been measured when the cover plate or antenna is perpendicular to the air flow. Applying this formula to the PTP 700 ODUs at different wind speeds, the resulting wind loadings are shown in Table 48 Table 48 ODU wind loading (newtons) Type of ODU Max surface area (square meters) Wind speed (kilometers per hour) 225 250 275 300 325 Connectorized+Integrated 0.160 530 N 655 N 792 N 943 N 1106 N Connectorized 0.062 205 N 254 N 307 N 365 N 429 N Equivalent results in US customary units are shown in Table 49. Table 49 ODU wind loading (pounds force) Type of ODU Max surface area (square feet) Wind speed (miles per hour) 140 155 170 185 200 Connectorized+Integrated 1.72 120 lb 147 lb 176 lb 209 lb 244 lb Connectorized 0.67 46 lb 57 lb 68 lb 81 lb 95 lb If an external antenna is installed, add the wind loading of the antenna to that of the ODU. The antenna manufacturer should be able to quote wind loading. Page 3-14 Chapter 3: System planning Site planning Hazardous locations Check that the ODUs will not be exposed to hazardous gases, as defined by HAZLOC (USA) and ATEX (Europe) regulations. If there is a risk of such exposure, then order the PTP 700 ATEX/Hazloc product variants, as these are intended for operation in locations with gas hazards. The ATEX and HAZLOC standards limit the EIRP as shown in Table 50. Table 50 EIRP limits from ATEX and HAZLOC standards ATEX gas group HAZLOC gas group Typical gas type Maximum EIRP (Watt) IIA Propane IIB Ethylene 3.5 IIC Hydrogen IIC Acetylene Further reading For information about⌠Refer to⌠Ordering Connectorized ATEX/HAZLOC ODUs Individual ODU part numbers on page 2-5 Ordering Connectorized+Integrated ATEX/HAZLOC ODUs Individual ODU part numbers on page 2-7 ATEX/HAZLOC standards and type approval Hazardous location compliance on page 4-27 Deployment of ATEX/HAZLOC ODUs PTP 700 Series Hazardous Location Guide PSU DC power supply If using the DC input on the AC+DC power injector, ensure that the DC power supply meets the following requirements: ⢠The voltage and polarity must be correct and must be applied to the correct PSU terminals. ⢠The power source must be rated as Safety Extra Low Voltage (SELV). ⢠The power source must be rated to supply at least 1.5A continuously. ⢠The power source cannot provide more than the Energy Hazard Limit as defined by IEC/EN/UL60950-1, Clause 2.5, Limited Power (The Energy Hazard Limit is 240VA). Page 3-15 Chapter 3: System planning Site planning PSU location Find a location for the AC+DC Enhanced Power Injector that meets the following requirements: ⢠The AC+DC Enhanced Power Injector can be mounted on a wall or other flat surface. ⢠The PSU is kept dry, with no possibility of condensation, flooding or rising damp. ⢠The PSU is located in an environment where it is not likely to exceed its operational temperature rating, allowing for natural convection cooling. ⢠The PSU can be connected to the ODU drop cable and network terminating equipment. ⢠The PSU can be connected to a compatible power supply. AC+DC Enhanced Power Injector: the use of DC supplies of less than 55V will reduce the usable distance between the PSU and ODU. PTP-SYNC location If PTP-SYNC is to be installed, consider the following factors when selecting a site: ⢠Indoor location with no possibility of condensation. ⢠Accessibility for viewing status indicators. ⢠The maximum cable length between the PSU and the PTP-SYNC is 2 m (6 ft). GPS receiver location Mount the GPS receiver for PTP-SYNC at a location that meets the following requirements: ⢠It must be possible to protect the installation as described in Grounding and lightning protection on page 3-11. ⢠It must have an un-interrupted view of at least half of the sky. For a receiver mounted on a wall there must be no other significant obstructions in the view of the sky. ⢠It must be mounted at least 1 m (3 ft), preferably 2 m (6 ft), away from other GPS receiving equipment. ⢠It must not be sited in the field of radiation of co-located radio communications equipment and should be positioned at a distance of at least 3 m (10 ft) away. Mount the GPS receiver on the wall of the equipment building, if there is a suitable location on the wall that can meet these requirements. Failing that, mount it on a metal tower or mast. Caution The GPS receiver is not approved for operation in locations where gas hazards exist, as defined by HAZLOC (USA) and ATEX (Europe). If PTP-SYNC is required in a hazardous location then the timing reference source must be either a PTP 700 ODU or a cabled 1 Hz signal from a system approved for Hazardous locations. Page 3-16 Chapter 3: System planning Site planning Mounting the GPS receiver module on the equipment building If mounting the GPS receiver for PTP-SYNC on the equipment building (Figure 43), select a position on the wall that meets the following requirements: ⢠It must be below the roof height of the equipment building or below the height of any roofmounted equipment (such as air conditioning plant). ⢠It must be below the lightning air terminals. ⢠It must not project more than 600mm (24 inches) from the wall of the building. If these requirements cannot all be met, then the module must be mounted on a metal tower or mast. Mounting the GPS receiver module on a metal tower or mast If mounting the GPS receiver module on a metal tower or mast (Figure 44), select a position that meets the following requirements: ⢠It must not be mounted any higher than is necessary to receive an adequate signal from four GPS satellites. ⢠It must be protected by a nearby lightning air terminal that projects farther out from the tower than the GPS receiver module. NIDU location Find a location for the NIDU that meets the following requirements: ⢠The NIDU can be mounted in a cabinet rack or on a flat surface. ⢠The NIDU is kept dry, with no possibility of condensation, flooding or rising damp. ⢠The NIDU is located in an environment where it is not likely to exceed its operational temperature rating, allowing for natural convection cooling. ⢠The NIDU can be connected to the PSU, LAN network terminating equipment and TDM transceivers. ⢠The NIDU can be connected to a compatible DC power supply. Drop cable grounding points To estimate how many grounding kits are required for each drop cable, refer to the site installation diagrams (Figure 36 , Figure 37 and Figure 38) and use the following criteria: ⢠The drop cable shield must be grounded near the ODU at the first point of contact between the drop cable and the mast, tower or building. ⢠The drop cable shield must be grounded at the building entry point. For mast or tower installations (Figure 36), use the following additional criteria: Page 3-17 Chapter 3: System planning Site planning ⢠The drop cable shield must be grounded at the bottom of the tower, near the vertical to horizontal transition point. This ground cable must be bonded to the tower or tower ground bus bar (TGB), if installed. ⢠If the tower is greater than 61 m (200 ft) in height, the drop cable shield must be grounded at the tower midpoint, and at additional points as necessary to reduce the distance between ground cables to 61 m (200 ft) or less. ⢠In high lightning-prone geographical areas, the drop cable shield must be grounded at spacing between 15 to 22 m (50 to 75 ft). This is especially important on towers taller than 45 m (150 ft). For roof installations (Figure 38), use the following additional criteria: ⢠The drop cable shield must be bonded to the building grounding system at its top entry point (usually on the roof). ⢠The drop cable shield must be bonded to the building grounding system at the entry point to the equipment room. LPU location Find a location for the top LPU that meets the following requirements: ⢠There is room to mount the LPU, either on the ODU mounting bracket or on the mounting pole below the ODU. ⢠The drop cable length between the ODU and top LPU must not exceed 600 mm. ⢠There is access to a metal grounding point to allow the ODU and top LPU to be bonded in the following ways: top LPU to ODU; ODU to grounding system. Find a location for the bottom LPU that meets the following requirements: ⢠The bottom LPU can be connected to the drop cable from the ODU. ⢠The bottom LPU is within 600 mm (24 in) of the point at which the drop cable enters the building, enclosure or equipment room within a larger building. ⢠The bottom LPU can be bonded to the grounding system. Multiple LPUs If two or three drop cables are connected to the ODU, the PSU and Aux drop cables each require their own top LPU, and the copper SFP drop cable requires a top surge protector, not a PTP 700 LPU (Figure 46). Optical cables do not require LPUs or ground cables (Figure 47). The copper SFP drop cable requires a bottom surge protector, not a PTP 700 LPU (Figure 48). The Aux drop cable may require an LPU near the auxiliary device. Page 3-18 Chapter 3: System planning Site planning Figure 46 ODU with PSU, Aux and copper SFP interfaces Page 3-19 Chapter 3: System planning Site planning Figure 47 ODU with PSU, Aux and optical SFP interfaces Figure 48 Bottom LPU and surge protector Page 3-20 Chapter 3: System planning Radio spectrum planning Radio spectrum planning This section describes how to plan PTP 700 links to conform to the regulatory restrictions that apply in the country of operation. Caution It is the responsibility of the user to ensure that the PTP product is operated in accordance with local regulatory limits. Note Contact the applicable radio regulator to find out whether or not registration of the PTP 700 link is required. General wireless specifications Table 51 lists the wireless specifications that apply to all PTP 700 frequency bands. Table 52 lists the wireless specifications that are specific to a single frequency band. Table 51 PTP 700 wireless specifications (all variants) Item Specification Channel selection Manual selection (fixed frequency). Dynamic frequency selection (DFS or DFS with DSO) is available in radar avoidance regions. Manual power control To avoid interference to other users of the band, maximum power can be set lower than the default power limit. Integrated antenna type 21 dBi Flat plate antenna (PTP 700 Connectorized+Integrated) Duplex schemes Symmetric fixed, asymmetric fixed and, for the Full license only, adaptive TDD. Range Line-of-Sight: 200 km (125 miles). Non-Line-of-Sight: 10 km (6 miles). Over-the-air encryption AES 128-bit or 256-bit. Weather sensitivity Sensitivity at higher modes may be reduced by adjusting the Adaptive Modulation Threshold. Error Correction FEC Page 3-21 Chapter 3: System planning Radio spectrum planning Table 52 PTP 700 wireless specifications (per frequency band) Item 4.5 GHz 4.9 GHz 5.1 GHz 5.2 GHz 5.4 GHz 5.8 GHz RF band (MHz) 4400â5000 4900â4990 5150â5250 5250â5350 5470â5725 5725â5875 Channel bandwidth (MHz) 5, 10, 15, 20, 30, 40, 45 5, 10, 15, 20 5, 10, 15, 20, 30, 40, 45 5, 10, 15, 20, 30, 40, 45 5, 10, 15, 20, 30, 40, 45 5, 10, 15, 20, 30, 40, 45 Typical receiver noise 6.5 dB 6.5 dB 6.5 dB 6.8 dB 6.8 dB 7.1 dB Typical antenna gain (integrated) 21.0 dBi 21.5 dBi 21.5 dBi 21.5 dBi 23.0 dBi 22.0 dBi Antenna beamwidth (integrated) 8° 8° 8° 8° 8° 8° Regulatory limits Many countries impose EIRP limits (Allowed EIRP) on products operating in the bands used by the PTP 700 Series. For example, in the 5.4 GHz and 5.8 GHz bands, these limits are calculated as follows: ⢠In the 5.4 GHz band (5470 MHz to 5725 MHz), the EIRP must not exceed the lesser of 30 dBm or (17 + 10 x Log Channel width in MHz) dBm. ⢠In the 5.8 GHz band (5725 MHz to 5875 MHz), the EIRP must not exceed the lesser of 36 dBm or (23 + 10 x Log Channel width in MHz) dBm. Some countries (for example the USA) impose conducted power limits on products operating in the 5.8 GHz band. Conforming to the limits Ensure the link is configured to conform to local regulatory requirements by installing license keys for the correct country. In the following situations, the license key does not prevent operation outside the regulations: ⢠When using connectorized ODUs with external antennas, the regulations may require the maximum transmit power to be reduced. ⢠When installing 5.2 GHz or 5.4 GHz links in the USA, it may be necessary to avoid frequencies used by Terminal Doppler Weather Radar (TDWR) systems. For more information, refer to Avoidance of weather radars (USA only) on page 3-24. Page 3-22 Chapter 3: System planning Radio spectrum planning Available spectrum The available spectrum for operation depends on the regulatory band. When configured with the appropriate license key, the unit will only allow operation on those channels which are permitted by the regulations. Certain regulations have allocated certain channels as unavailable for use: ⢠ETSI has allocated part of the 5.4 GHz band to weather radar. ⢠UK and some other European countries have allocated part of the 5.8 GHz band to Road Transport and Traffic Telematics (RTTT) systems. The number and identity of channels barred by the license key and regulatory band is dependent on the channel bandwidth and channel raster selected. Barred channels are indicated by a âNo Entryâ symbol displayed on the Spectrum Expert web page (Spectrum Expert page in radar avoidance mode on page 7-37). Channel bandwidth Select the required channel bandwidth for the link. The selection depends upon the regulatory band selected. The wider the channel bandwidth, the greater the capacity. As narrower channel bandwidths take up less spectrum, selecting a narrow channel bandwidth may be a better choice when operating in locations where the spectrum is very busy. Both ends of the link must be configured to operate on the same channel bandwidth. Frequency selection Regions without mandatory radar detection In regions that do not mandate DFS, choose DSO or Fixed Frequency: ⢠Dynamic Spectrum Optimization (DSO): In this mode, the unit monitors the spectrum looking for the channel with the lowest level of interference. Statistical techniques are used to select the most appropriate transmit and receive channels. The unit can be configured such that it operates in DSO mode, but does not operate on selected channels. This allows a frequency plan to be implemented in cases where multiple links are installed in close proximity. ⢠Fixed Frequency: In this mode, the unit must be configured with a single fixed transmit frequency and a single fixed receive frequency. These may set to the same value or to different values. This mode should only be considered in exceptional circumstances, for example where it is known that are no sources of interference on the selected channels. Page 3-23 Chapter 3: System planning Radio spectrum planning Regions with mandatory radar detection In regions that mandate DFS, the unit first ensures that there is no radar activity on a given channel for a period of 60 seconds before radiating on that channel. Once a channel has been selected for operation, the unit will continually monitor for radar activity on the operating channel. If detected, it will immediately cease radiating and attempt to find a new channel. In DFS regions, choose DFS or DFS with DSO: ⢠Dynamic Frequency Selection (DFS): Once a channel is selected, the unit will only attempt to find an alternative channel if radar activity has been detected on the operating channel. ⢠DFS with DSO: In addition to switching channels on detection of radar, the unit will also switch to a channel which has a significantly lower level of interference than the current channel of operation. Before radiating on the newly selected channel, the unit must again ensure that there is no radar activity on the new channel for a period of 60 seconds. This mode therefore provides the benefit of switching to a channel with lower interference but at the expense of an outage of approximately 60 to 120 seconds. For this reason, the threshold for switching channels is greater than when DSO is operating in a non-radar region. Radar avoidance requirements in the 5.4 GHz band are defined as follows: ⢠For the EU: in specification EN 301-893. ⢠For the US: in the specification FCC part 15.407 plus the later requirements covered in Important Regulatory Information in this User Guide. ⢠For Canada: in the specification RSS210 Annex 9. Radar avoidance at 5.8 GHz is applicable to EU operation (not FCC/IC) and the requirements are defined in EN 302 502 v1.2.1. Avoidance of weather radars (USA only) To comply with FCC rules (KDB 443999: Interim Plans to Approve UNII Devices Operating in the 5470 - 5725 MHz Band with Radar Detection and DFS Capabilities), units which are installed within 35 km (22 miles) of a Terminal Doppler Weather Radar (TDWR) system (or have a line of sight propagation path to such a system) must be configured to avoid any frequency within +30 MHz or â30 MHz of the frequency of the TDWR device. This requirement applies even if the master is outside the 35 km (22 miles) radius but communicates with outdoor clients which may be within the 35 km (22 miles) radius of the TDWRs. If interference is not eliminated, a distance limitation based on line-of-sight from TDWR will need to be used. Devices with bandwidths greater than 20 MHz may require greater frequency separation. When planning a link in the USA, visit http://spectrumbridge.com/udia/home.aspx, enter the location of the planned link and search for TDWR radars. If a TDWR system is located within 35 km (22 miles) or has line of sight propagation to the PTP device, perform the following tasks: ⢠Register the installation on http://spectrumbridge.com/udia/home.aspx. ⢠Make a list of channel center frequencies that must be barred, that is, those falling within +30 MHz or â30 MHz of the frequency of the TDWR radars. The affected channels must be barred as described in Barring channels on page 7-39. Page 3-24 Chapter 3: System planning Link planning Link planning This section describes factors to be taken into account when planning links, such as range, obstacles path loss and throughput. LINKPlanner is recommended. LINKPlanner The Cambium LINKPlanner software and user guide may be downloaded from the support website (see Contacting Cambium Networks on page 1). LINKPlanner imports path profiles and predicts data rates and reliability over the path. It allows the system designer to try different antenna heights and RF power settings. It outputs an installation report that defines the parameters to be used for configuration, alignment and operation. Use the installation report to compare predicted and actual link performance. Range and obstacles Calculate the range of the link and identify any obstacles that may affect radio performance. Perform a survey to identify all the obstructions (such as trees or buildings) in the path and to assess the risk of interference. This information is necessary in order to achieve an accurate link feasibility assessment. The PTP 700 Series is designed to operate in Non-Line-of-Sight (NLoS) and Line-of-Sight (LoS) environments. An NLOS environment is one in which there is no optical line-of-sight, that is, there are obstructions between the antennas. The PTP 700 Series will operate at ranges from 100 m (330 ft) to 200 km (125 miles), within 3 modes: 0-40 km (0-25 miles), 0-100 km (0-62 miles) and 0-200 km (0-124 miles). Operation of the system will depend on obstacles in the path between the units. Operation at 40 km (25 miles) or above will require a near line-of-sight path. Operation at 100 m (330 ft) could be achieved with one unit totally obscured from the other unit, but with the penalty of transmitting at higher power in a non-optimal direction, thereby increasing interference in the band. LoS links in radar regions When planning an LoS link to operate in a radar detection region, ensure that receiver signal level is low enough to allow the PTP 700 to detect radar signals: ⢠With integrated antennas, the recommended minimum LoS operating range is 110 meters (360 ft) for 5.2 GHz or 5.4 GHz, and 185 meters (610 ft) for 5.8 GHz. Shorter operating ranges will lead to excessive receiver signal levels. ⢠With higher gain connectorized antennas, ensure the predicted receiver signal level (from LINKPlanner) is below -53 dBm (for 5.2 GHz or 5.4 GHz) or below -58 dBm (for 5.8 GHz). Page 3-25 Chapter 3: System planning Link planning LINKPlanner for synchronized networks TDD synchronization should be planned using LINKPlanner. This will provide the necessary TDD frame parameter values which are required to complete a synchronized installation. Please refer to the LINKPlanner User Guide. Path loss Path loss is the amount of attenuation the radio signal undergoes between the two ends of the link. The path loss is the sum of the attenuation of the path if there were no obstacles in the way (Free Space Path Loss), the attenuation caused by obstacles (Excess Path Loss) and a margin to allow for possible fading of the radio signal (Fade Margin). The following calculation needs to be performed to judge whether a particular link can be installed: L free _ space + Lexcess + L fade + Lseasonal < Lcapability Where: Is: L free _ space Free Space Path Loss (dB) Lexcess Excess Path Loss (dB) L fade Fade Margin Required (dB) Lseasonal Seasonal Fading (dB) Lcapability Equipment Capability (dB) Adaptive modulation Adaptive modulation ensures that the highest throughput that can be achieved instantaneously will be obtained, taking account of propagation and interference. When the link has been installed, web pages provide information about the link loss currently measured by the equipment, both instantaneously and averaged. The averaged value will require maximum seasonal fading to be added, and then the radio reliability of the link can be computed. For minimum error rates on TDM links, the maximum modulation mode should be limited to 64QAM 0.75. For details of the system threshold, output power and link loss for each frequency band in all modulation modes for all available channel bandwidths, refer to System threshold, output power and link loss on page 3-60. Page 3-26 Chapter 3: System planning Link planning Calculating data rate capacity The data rate capacity of a PTP link is defined as the maximum end-to-end Ethernet throughput (including Ethernet headers) that it can support. It is assumed that Ethernet frames are 1518 octet. Data rate capacity is determined by the following factors: ⢠Licensed data throughput capability (ODU license: Full or Lite) ⢠Link Symmetry ⢠Link Mode Optimization (IP or TDM) ⢠Modulation Mode ⢠Channel Bandwidth ⢠Link Range ⢠Capacity reserved for TDM operation Calculation procedure To calculate the data rate capacity of a PTP 700 link, proceed as follows: Use the tables in Data throughput capacity tables on page 3-71 to look up the data throughput capacity rates (Tx, Rx and Both) for the required combination of: ⢠Link Symmetry ⢠Link Mode Optimization ⢠Modulation Mode ⢠Channel Bandwidth ⢠Capacity License (Full or Lite) The tables contain data rates for links of zero range. Use the range adjustment graphs in Data throughput capacity tables on page 3-71 to look up the Throughput Factor that must be applied to adjust the data rates for the actual range of the link. Multiply the data rates by the Throughput Factor to give the throughput capacity of the link. Subtract capacity reserved for TDM operation. See TDM traffic load on page 3-116. Note The data rates for adaptive symmetry apply to the most asymmetric case where the link has significant offered traffic in one direction only. The data rates for adaptive symmetry with bidirectional offered traffic are the same as those for link symmetry 1:1 with link optimization IP. Page 3-27 Chapter 3: System planning Link planning Calculation example Suppose that the link characteristics are: ⢠PTP 700 variant = Lite ⢠Link Symmetry = 1:1 ⢠Link Mode Optimization = TDM ⢠Modulation Mode = 64QAM 0.92 Dual ⢠Channel Bandwidth = 10 MHz ⢠Link Range = 60 km The calculation procedure for this example is as follows: Use Table 93 to look up the data throughput capacity rates: Tx = 21 Mbits/s Rx = 21 Mbits/s Aggregated = 42 Mbits/s Use Figure 77 to look up the Throughput Factor for 1:1, TDM, 10 MHz, Lite and Link Range 60 km. The factor is 0.86. Multiply the rates from Step 1 by the Throughput Factor from Step 2 to give the throughput capacity of the link: Tx = 18.1 Mbits/s Rx = 18.1 Mbits/s Aggregated = 36.1 Mbits/s Page 3-28 Chapter 3: System planning Planning for connectorized units Planning for connectorized units This section describes factors to be taken into account when planning to use connectorized ODUs with external antennas in PTP 700 links. When to install connectorized units The majority of radio links can be successfully deployed with the integrated antenna in the Connectorized+Integrated ODU. However the integrated antenna may not be sufficient in some areas, for example: ⢠Where the path is heavily obscured by dense woodland on an NLOS link. ⢠Where long LOS links (>23 km or >14 miles) are required. ⢠Where there are known to be high levels of interference. LINKPlanner can be used to identify these areas of marginal performance. In these areas, connectorized external antennas should be used. Choosing external antennas When selecting external antennas, consider the following factors: ⢠The required antenna gain. ⢠Ease of mounting and alignment. ⢠Antenna polarization: For a simple installation process, select one dual-polarization antenna (as the integrated antenna) at each end. To achieve spatial diversity, select two single-polarization antennas at each end. Spatial diversity provides additional fade margin on very long LOS links where there is evidence of correlation of the fading characteristics on Vertical and Horizontal polarizations. Note Enter the antenna gain and cable loss into the Installation Wizard, if the country selected has an EIRP limit, the corresponding maximum transmit power will be calculated automatically by the unit. Page 3-29 Chapter 3: System planning Planning for connectorized units Note Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that necessary for successful communication. ConformĂŠment Ă la rĂŠglementation d'Industrie Canada, le prĂŠsent ĂŠmetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infĂŠrieur) approuvĂŠ pour l'ĂŠmetteur par Industrie Canada. Dans le but de rĂŠduire les risques de brouillage radioĂŠlectrique Ă l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnĂŠe ĂŠquivalente (p.i.r.e.) ne dĂŠpasse pas l'intensitĂŠ nĂŠcessaire Ă l'ĂŠtablissement d'une communication satisfaisante. Calculating RF cable length (5.8 GHz FCC only) The 5.8 GHz band FCC approval for the product is based on tests with a cable loss between the ODU and antenna of not less than 1.2 dB. If cable loss is below 1.2 dB with a 1.3 m (4 ft) diameter external antenna, the connectorized PTP 700 may exceed the maximum radiated spurious emissions allowed under FCC 5.8 GHz rules. Cable loss depends mainly upon cable type and length. To meet or exceed the minimum loss of 1.2 dB, use cables of the type and length specified in Table 53 (source: Times Microwave). This data excludes connector losses. Table 53 RF cable lengths required to achieve 1.2 dB loss at 5.8 GHz RF cable type Minimum cable length LMR100 0.6 m (1.9 ft) LMR200 1.4 m (4.6 ft) LMR300 2.2 m (7.3 ft) LMR400 3.4 m (11.1 ft) LMR600 5.0 m (16.5 ft) Page 3-30 Chapter 3: System planning Configuration options for TDD synchronization Configuration options for TDD synchronization This section describes the different configuration options that may be used for implementing TDD synchronization in the PTP 700 Series. Schematic diagrams are included. The PTP 700 supports the following TDD synchronization configurations: ⢠Single link configuration with PTP-SYNC on page 3-32. ⢠Cluster with PTP-SYNC and GPS receiver on page 3-33. ⢠Cluster with PTP-SYNC and no GPS receiver on page 3-34. Caution The PTP-SYNC is compatible only with the PTP 650/700 AC + DC Power Injector. The PTP 650 AC Power Injector will not work with a PTP-SYNC, and it is likely that a fuse will be blown in the PTP-SYNC if this is attempted. Page 3-31 Chapter 3: System planning Configuration options for TDD synchronization Single link configuration with PTP-SYNC Each link requires one PTP-SYNC unit connected to the master ODU and one compatible GPS receiver. Use this configuration where a site contains only one TDD master ODU. The GPS receiver and LPU can be replaced by an alternative compatible 1 Hz timing reference (Figure 49). The wireless configuration settings are: ⢠Master Slave Mode = Master. ⢠TDD Sync Device = PTPSYNC. ⢠Cluster Master Slave = Cluster Master. ⢠PTP Sync Site Reference = GPS/1PPS External. Figure 49 TDD synchronization configuration â single link with PTP-SYNC GPS receiver ODU PTP-SYNC GPS/ SYNC SYNC IN OUT AC supply PIDU IN ODU OUT ODU AC+DC Power Injector AC In LAN Customer LAN Outdoor CAT5e cable, gel-filled, shielded with copper-plated steel. CAT5e cable, foil or braid screened, with screened connectors. CAT5e cable, unscreened or screened. Ground cable. Page 3-32 Chapter 3: System planning Configuration options for TDD synchronization Cluster with PTP-SYNC and GPS receiver Each link requires one PTP-SYNC unit. Each site requires one compatible GPS receiver. Collocated PTP-SYNC units are connected together in a daisy-chain. Between two and ten PTP-SYNCs may be chained in this way. Use this configuration where a site contains collocated TDD master ODUs in an extended network and where multiple sites have TDD master ODUs (Figure 50). The wireless configuration settings are: ⢠Master Slave Mode = Master (all ODUs in cluster). ⢠TDD Sync Device = PTPSYNC (all ODUs in cluster). ⢠Cluster Master Slave = Cluster Master (first ODU) and Cluster Slave (others). ⢠PTP Sync Site Reference = GPS/1PPS External (all ODUs in cluster). Figure 50 TDD synchronization configuration â cluster with PTP-SYNC and GPS GPS receiver Cluster Master ODU Cluster Slave ODU PTP-SYNC GPS/ SYNC SYNC IN OUT AC supply PIDU IN ODU OUT ODU AC+DC Power Injector AC In Cluster Slave ODU PTP-SYNC GPS/ SYNC SYNC IN OUT AC supply PIDU IN ODU OUT ODU AC+DC Power Injector AC In PTP-SYNC GPS/ SYNC SYNC IN OUT AC supply AC In PIDU IN ODU OUT ODU AC+DC Power Injector LAN LAN LAN Customer LAN Customer LAN Customer LAN Outdoor CAT5e cable, gel-filled, shielded with copper-plated steel. CAT5e cable, foil or braid screened, with screened connectors. CAT5e cable, unscreened or screened. Ground cable. Page 3-33 Chapter 3: System planning Configuration options for TDD synchronization Cluster with PTP-SYNC and no GPS receiver Each link requires one PTP-SYNC unit. PTP-SYNC units are connected together in a daisy-chain. Between two and ten PTP-SYNCs may be chained in this way. One ODU is designated as a cluster master. Use this configuration where all master ODUs are collocated at a single site. As this configuration does not require a GPS receiver, it provides additional flexibility, particularly in applications requiring rapid deployment (Figure 51). The wireless configuration settings are: ⢠Master Slave Mode = Master (all ODUs in cluster). ⢠TDD Sync Device = PTPSYNC (all ODUs in cluster). ⢠Cluster Master Slave = Cluster Master (first ODU) and Cluster Slave (others). ⢠PTP Sync Site Reference = Internal (all ODUs in cluster). Figure 51 TDD synchronization configuration â cluster with PTP-SYNC and no GPS Cluster Master ODU Cluster Slave ODU PTP-SYNC GPS/ SYNC SYNC IN OUT AC supply PIDU IN ODU OUT ODU AC+DC Power Injector AC In Cluster Slave ODU PTP-SYNC GPS/ SYNC SYNC IN OUT AC supply PIDU IN ODU OUT ODU AC+DC Power Injector AC In PTP-SYNC GPS/ SYNC SYNC IN OUT AC supply AC In PIDU IN ODU OUT ODU AC+DC Power Injector LAN LAN LAN Customer LAN Customer LAN Customer LAN Outdoor CAT5e cable, gel-filled, shielded with copper-plated steel. CAT5e cable, foil or braid screened, with screened connectors. CAT5e cable, unscreened or screened. Ground cable. Page 3-34 Chapter 3: System planning Data network planning Data network planning This section describes factors to be considered when planning PTP 700 data networks. Ethernet interfaces The PTP 700 Ethernet ports conform to the specifications listed in Table 58. Table 54 PTP 700 Ethernet bridging specifications Ethernet Bridging Specification Protocol IEEE802.1; IEEE802.1p; IEEE802.3 compatible QoS Eight wireless interface priority queues based on these standards: IEEE 802.1p, IEEE 802.1Q, IEEE 802.1ah, IEEE 802.1ad, DSCP IPv4, DSCP IPv6, MPLS TC, DSCP in PPP Session Stage Interfaces 100BASE-TX, 1000BASE-T, 1000BASE-SX, 1000BASE-LX MDI/MDIX auto crossover supported Max Ethernet frame size 9600 bytes Service classes for traffic 8 classes Practical Ethernet rates depend on network configuration and higher layer protocols. Over the air throughput is capped to the rate of the Ethernet interface at the receiving end of the link. Layer two control protocols PTP 700 identifies layer two control protocols (L2CPs) from the Ethernet destination address of bridged frames. The QoS classification can be separately configured for these protocols. Table 55 Destination address in layer two control protocols Destination address Protocol 01-80-c2-00-00-00 to 01-80-c2-00-00-0f IEEE 802.1 bridge protocols 01-80-c2-00-00-20 to 01-80-c2-00-00-2f IEEE 802.1 Multiple Registration Protocol (MRP) 01-80-c2-00-00-30 to 01-80-c2-00-00-3f IEEE 802.1ag, Connectivity Fault Management (CFM) 01-19-a7-00-00-00 to 01-19-a7-00-00-ff Ring Automatic Protection Switching (R-APS) 00-e0-2b-00-00-04 Ethernet Automatic Protection Switching (EAPS) Page 3-35 Chapter 3: System planning Data network planning Ethernet port allocation Port allocation rules Decide how the three ODU Ethernet ports will be allocated to customer Data Service, Second Data Service, Management Service and Local Management Service based on the following rules: ⢠Map the Data Service to one of the three wired Ethernet ports. ⢠If required, map the optional Second Data Service to one of the remaining wired Ethernet ports. If the Second Data Service is not required, select None. The Second Data Service is available only in ODUs with a Full capacity license. ⢠If required, map the Management Service to one of the Ethernet ports, otherwise select None. The Management Service will be In-Band if it shares a port with the Data Service or Second Data Service, otherwise it will be Out-of-Band. Out-of-Band Management is not available when the Second Data Service is enabled. ⢠If required, enable the Local Management Service on one or more of the remaining unused Ethernet ports. The LAN Configuration page ensures that the Management Agent can always be reached using either the Management Service or the Local Management Service. Mapping of ports and services The rules described above allow for the following twelve distinct combinations of services: Table 56 Combinations of services Service combination Figure Data + Local Management Figure 52 Data + Local Management + Local Management Figure 53 Data + In-Band Management Figure 54 Data + In-Band Management + Local Management Figure 55 Data + In-Band Management + Local Management + Local Management Figure 56 Data + Out-of-Band Management Figure 57 Data + Out-of-Band Management + Local Management Figure 58 Data + Second Data + In-Band Management (with Data) Figure 59 Data + Second Data + In-Band Management (with Data) + Local Management Figure 60 Data + Second Data + In-Band Management (with Second Data) Figure 61 Data + Second Data + In-Band Management (with Second Data) + Local Management Figure 62 Data + Second Data + Local Management Figure 63 Page 3-36 Chapter 3: System planning Data network planning Figure 52 to Figure 63 illustrate the internal routing of Ethernet traffic in the twelve combinations of services listed in Table 56. Figure 52 Ports and Services: Data + Local Management Management Agent Local Management Ethernet Port MAC Relay Ethernet Port Customer Data Ethernet Port MAC Relay Wireless Port PTP 700 ODU Figure 53 Ports and Services: Data + Local Management + Local Management Management Agent Local Management Local Management Customer Data Ethernet Port MAC Relay Ethernet Port MAC Relay Ethernet Port MAC Relay PTP 700 ODU Page 3-37 Wireless Port Chapter 3: System planning Data network planning Figure 54 Ports and Services: Data + In-Band Management Management Agent Ethernet Port Ethernet Port Customer Data and In-Band Management Ethernet Port MAC Relay Wireless Port PTP 700 ODU Figure 55 Ports and Services: Data + In-Band Management + Local Management Management Agent Local Management Ethernet Port MAC Relay Ethernet Port Customer Data and In-Band Management Ethernet Port MAC Relay PTP 700 ODU Page 3-38 Wireless Port Chapter 3: System planning Data network planning Figure 56 Ports and Services: Data + In-Band Management + Local Management + Local Management Management Agent Local Management Local Management Customer Data and In-Band Management Ethernet Port MAC Relay Ethernet Port MAC Relay Ethernet Port MAC Relay Wireless Port PTP 700 ODU Figure 57 Ports and Services: Data + Out-Of-Band Management Management Agent Out-of-Band Management Ethernet Port MAC Relay Ethernet Port Customer Data Ethernet Port MAC Relay Wireless Port PTP 700 ODU Page 3-39 Chapter 3: System planning Data network planning Figure 58 Ports and Services: Data + Out-Of-Band Management + Local Management Management Agent Local Management Out-of-Band Management Customer Data Ethernet Port MAC Relay Ethernet Port MAC Relay Ethernet Port MAC Relay Wireless Port PTP 700 ODU Figure 59 Ports and Services: Data + Second Data + In-Band Management (with Data) Management Agent Ethernet Port Customer Data and In-Band Management Second Data Ethernet Port MAC Relay Ethernet Port MAC Relay Wireless Port PTP 700 ODU Page 3-40 Chapter 3: System planning Data network planning Figure 60 Ports and Services: Data + Second Data + In-Band Management (with Data) + Local Management Management Agent Local Management Customer Data and In-Band Management Second Data Ethernet Port MAC Relay Ethernet Port MAC Relay Ethernet Port MAC Relay Wireless Port PTP 700 ODU Figure 61 Ports and Services: Data + Second Data + In-Band Management (with Second Data) Management Agent Ethernet Port Second Data and In-Band Management Customer Data Ethernet Port MAC Relay Ethernet Port MAC Relay Wireless Port PTP 700 ODU Page 3-41 Chapter 3: System planning Data network planning Figure 62 Ports and Services: Data + Second Data + In-Band Management (with Second Data) + Local Management Management Agent Local Management Second Data and In-Band Management Customer Data Ethernet Port MAC Relay Ethernet Port MAC Relay Ethernet Port MAC Relay Wireless Port PTP 700 ODU Figure 63 Ports and Services: Data + Second Data + Local Management Management Agent Local Management Second Data Customer Data Ethernet Port MAC Relay Ethernet Port MAC Relay Ethernet Port MAC Relay Wireless Port PTP 700 ODU Use a compatible combination of services at both ends of the link PTP 700 allows twelve different combinations of services at each ODU. Local Management can be used at one end or both ends of the link independently. Allowing for optional Local Management, the twelve combinations listed in Table 56 on page 3-36 reduce to a list of six combinations of Data, In-Band Management, Out-of-Band Management and Second Data as follows: Page 3-42 Chapter 3: System planning Data network planning Table 57 Combinations of services with optional Local Management Service combination Data + Local Management + [Local Management] Data + In-Band Management + [Local Management] + [Local Management] Data + Out-of-Band Management + [Local Management] Data + Second Data + In-Band Management (with Data) + [Local Management] Data + Second Data + In-Band Management (with Second Data) + [Local Management] Data + Second Data + Local Management Ensure that the same service combination from Table 57 is used at both ends of the link. Warning Take care to avoid selecting different combinations of services at the two ends of the link. Mapping services to physical Ethernet ports In general, the three physical Ethernet ports (Main PSU, Aux and SFP) are interchangeable. Allowing for the freedom to choose the physical Ethernet ports, the six combinations in Table 57 give rise to a much larger number of different permutations (actually 63 of them). There is no objection to mapping the services to different physical ports at the two ends of the link, providing that the same row of Table 57 is used at each end. For example, Figure 64 shows a link where the combination of services is from the third row of Table 57. Local Management is provided at one end only. The Management Service maps the Main PSU Port at one end and the Aux Port at the other end. The Data Service maps to the SFP Port at one end of the link and to the Main PSU Port at the other end of the link. Note SFP will only be shown as an option when SFP Port Support is enabled via the licence key. Page 3-43 Chapter 3: System planning Data network planning Figure 64 Example of independent mapping of services to ports Management Agent Management Agent Local Management Out-of-Band Management Customer Data Aux Port MAC Relay MAC Relay Main PSU MAC Relay SFP Port MAC Relay Aux Port Main PSU Wireless Port Wireless Port MAC Relay Out-of-Band Management Customer Data SFP Port PTP 700 ODU PTP 700 ODU Additional port allocation rules The three Ethernet ports are generally interchangeable, except for some specific additional rules listed below: ⢠If the TDM interface (E1 or T1) is enabled, ensure that only the Main PSU port is allocated to Data Service ⢠If the system is to be used in a Synchronous Ethernet hierarchy, ensure that the upstream timing source is connected to the Main PSU port (downstream devices can be connected to any port) ⢠If the system is operating as an IEEE 1588-2008 Transparent Clock, ensure the data path traverses only the Main PSU or Fiber SFP ports at both ends of the link. Note The Main PSU port is always used to supply power to the ODU, even when it is not allocated to a data or management service. Note The procedure for configuring these ports at the web interface is described in Ethernet port allocation on page 3-36. Note Transparent Clock is not supported over the Aux Port and SFP port with Copper connectivity. Page 3-44 Chapter 3: System planning Data network planning VLAN membership Decide if the IP interface of the ODU management agent will be connected in a VLAN. If so, decide if this is a standard (IEEE 802.1Q) VLAN or provider bridged (IEEE 802.1ad) VLAN, and select the VLAN ID for this VLAN. Use of a separate management VLAN is strongly recommended. Use of the management VLAN helps to ensure that the ODU management agent cannot be accessed by customers. If the system is to operate as an IEEE 1588-2008 Transparent Clock, decide if residence time corrections should be made to: ⢠All 1588 event frames, regardless of VLAN membership, or ⢠Only 1588 event frames in a specific customer bridged VLAN, or ⢠Only 1588 event frames in a specific provider bridged VLAN Priority for management traffic Choose the Ethernet and IP (DSCP) priority for management traffic generated within the ODU management agent. The priority should be selected so as to be consistent with existing policy on priority of management traffic in the network. Use of a high priority is strongly recommended to ensure that management traffic is not discarded if the link is overloaded. Ensure that the priority assigned to management traffic is consistent with the quality of service scheme configured for bridged Ethernet traffic. If QoS for bridged traffic is based on the IP/MPLS scheme, set the DSCP management priority to map to a high priority queue. If QoS for bridged traffic is based on the Ethernet scheme, set the VLAN management priority to map to a high priority queue. IP interface Select the IP version for the IP interface of the ODU management agent. PTP 700 can operate in IPv4 mode, IPv6 mode, or in a dual IPv4/IPv6 mode. Choose one IPv4 address and/or one IPv6 address for the IP interface of the ODU management agent. The IP address or addresses must be unique and valid for the connected network segment and VLAN. Find out the correct subnet mask (IPv4) or prefix length (IPv6) and gateway IP address for this network segment and VLAN. Ensure that the design of the data network permits bidirectional routing of IP datagrams between network management systems and the ODUs. For example, ensure that the gateway IP address identifies a router or other gateway that provides access to the rest of the data network. Page 3-45 Chapter 3: System planning Data network planning Quality of service for bridged Ethernet traffic Decide how quality of service will be configured in PTP 700 to minimize frame loss and latency for high priority traffic. Wireless links often have lower data capacity than wired links or network equipment like switches and routers, and quality of service configuration is most critical at network bottlenecks. PTP 700 provides eight queues for traffic waiting for transmission over the wireless link. Q0 is the lowest priority queue and Q7 is the highest priority queue. Traffic is scheduled using strict priority; in other words, traffic in a given queue is transmitted when all higher-priority queues are empty. Layer 2 control protocols Select the transmission queue for each of the recognised layer 2 control protocols (L2CP). These protocols are essential to correct operation of the Ethernet network, and are normally mapped to a high priority queue. Ethernet frames that match one of the recognized L2CPs are not subject to the Ethernet and IP/MPLS classification described below. Priority schemes Select the priority scheme based on Ethernet priority or IP/MPLS priority to match QoS policy in the rest of the data network. Ethernet priority is also known as Layer 2 or link layer priority. IP/MPLS priority is also known as Layer 3 or network layer priority. Ethernet priority scheme Ethernet priority is encoded in a VLAN tag. Use the Ethernet priority scheme if the network carries traffic in customer or service provider VLANs, and the priority in the VLAN tag has been set to indicate the priority of each type of traffic. Select a suitable mapping from the Ethernet priority to the eight PTP 700 queues. An advantage of Ethernet priority is that any VLAN-tagged frame can be marked with a priority, regardless of the higher-layer protocols contained within the frame. A disadvantage of Ethernet priority is that the priority in the frame must be regenerated whenever traffic passes through a router. IP/MPLS priority scheme IP priority is determined by the DSCP value encoded in the ToS field in IPv4 and Traffic Class in IPv6. PTP 700 can locate the DSCP value in IP headers encapsulated within VLAN tags and/or PPP and PPPoE headers. The DSCP field provides 64 levels of priority. PTP 700 selects a suitable mapping from these DSCP values to the eight PTP 700 queues. The advantages of IP priority are that priority in the IP header is normally propagated transparently through a router, also the DSCP field supports a large number of distinct priority code points. A disadvantage of DSCP is that frames receive a single default classification if they contain a network layer protocol other than IPv4 or IPv6. This is controlled by the user setting the Unknown Network Layer Protocol queue value in the same QoS Configuration page under IP/MPLS QoS. Page 3-46 Chapter 3: System planning Data network planning MPLS priority is encoded in the traffic class (TC) field in the outermost MPLS label. Select a suitable mapping from MPLS TC to the eight PTP 700 queues. âDaisy-chainingâ PTP 700 links When connecting two or more PTP 700 links together in a network (daisy-chaining), do not install direct copper Cat5e connections between the PSUs. Each PSU must be connected to the network terminating equipment using the LAN port. To daisy-chain PTP 700 links, install each ODU-to-ODU link using one of the following solutions: ⢠A copper Cat5e connection between the Aux ports of two ODUs. For details of the Ethernet standards supported and maximum permitted cable lengths, see Ethernet standards and cable lengths on page 2-34. ⢠A copper Cat5e connection between the Aux port of one ODU and the SFP port of the next ODU (using a copper SFP module). For details of the Ethernet standards supported and maximum permitted cable lengths, see Ethernet standards and cable lengths on page 2-34. ⢠Optical connections between the ODUs (SFP ports) using optical SFP modules at each ODU. For details of the Ethernet standards supported and maximum permitted cable lengths, see SFP module kits on page 2-41. Green Ethernet switches Do not connect PTP 700 units to Ethernet networking products that control the level of the transmitted Ethernet signal based on the measured length of the Ethernet link, for example Green Ethernet products manufactured by D-Link Corporation. The Ethernet interfaces in these networking products do not work correctly when connected directly to the PTP 700 PSU. Page 3-47 Chapter 3: System planning TDM network planning TDM network planning This section describes factors to be considered when planning PTP 700 TDM networks. Caution If the ODU port has negotiated a link at 100BASE-T, the NIDU will not send or receive TDM data, and will not bridge customer data traffic. Ensure that the Ethernet drop cable between the ODU and the PSU, and the network cable between the PSU and the NIDU, will reliably support operation at 1000BASE-T. The PTP 700 TDM ports conform to the specifications listed in Table 58. Table 58 PTP 700 TDM interface specifications (if NIDU installed) TDM Bridging Specification TDM ports 8 E1 or 8 T1 ITU-T Recommendation G.703 (10/1998) â Series G: âTransmission Systems and Media, Digital Systems and Networks; âPhysical/electrical characteristics of hierarchical digital Interfacesâ. Timing ITU-T Recommendation G.823 (03/2000) â Series G: âTransmission Systems and Media, Digital Systems and Networks; The control of jitter and wander within digital networks which are based on the 2048 kbits/s hierarchyâ. ITU-T Recommendation G.824 (03/2000) â Series G: âTransmission Systems and Media, Digital Systems and Networks; The control of jitter and wander within digital networks which are based on the 1544 kbit/s hierarchyâ. Ethernet IEEE 802.3 2012 â IEEE Standard for Information technology â Telecommunications and information â exchange between systems â Local and metropolitan area networks â Specific requirements. Line coding AMI, B8ZS/HDB3 Line resistance 100 / 120 Ohm E1/T1 latency (one way) Typically 1 to 3 ms depending on range, bandwidth, modulation mode and number of E1/T1 port. Use LINKPlanner to calculate E1/T1 latency. Page 3-48 Chapter 3: System planning Network management planning Network management planning This section describes how to plan for PTP 700 links to be managed remotely using SNMP. Planning for SNMP operation The supported notifications are as follows: ⢠Cold start ⢠Wireless Link Up/Down ⢠Channel Change ⢠DFS Impulse Interference ⢠Authentication Failure ⢠Main PSU Port Up Down ⢠Aux Port Up Down ⢠SFP Port Up Down Ensure that the following MIBs are loaded on the network management system. ⢠RFC-1493. BRIDGE-MIB ⢠RFC-2233. IF-MIB ⢠RFC-3411. SNMP-FRAMEWORK-MIB ⢠RFC-3412. SNMP-MPD-MIB ⢠RFC-3413. SNMP-TARGET-MIB ⢠RFC-3414. SNMP-USER-BASED-SM-MIB ⢠RFC-3415. SNMP-VIEW-BASED-ACM-MIB ⢠RFC-3418. SNMPv2-MIB ⢠RFC-3826. SNMP-USM-AES-MIB ⢠RFC-4293 IP-MIB ⢠PTP 700 Series proprietary MIB Note The proprietary MIBs are provided in the PTP 700 Series software download files in the support website (see Contacting Cambium Networks on page 1). Page 3-49 Chapter 3: System planning Network management planning Supported diagnostic alarms PTP 700 supports the diagnostic alarms listed in Table 167. The web-based interface may be used to enable or disable generation of each supported SNMP notification or diagnostic alarm. Enabling SNMP Enable the SNMP interface for use by configuring the following attributes in the SNMP Configuration page: ⢠SNMP State (default disabled) ⢠SNMP Version (default SNMPv1/2c) ⢠SNMP Port Number (default 161) Page 3-50 Chapter 3: System planning Security planning Security planning This section describes how to plan for PTP 700 links to operate in secure mode. Planning for SNTP operation Note PTP 700 does not have a battery-powered clock, so the set time is lost each time the ODU is powered down. To avoid the need to manually set the time after each reboot, use SNTP server synchronization. Before starting to configure Simple Network Time Protocol (SNTP): ⢠Identify the time zone and daylight saving requirements that apply to the system. ⢠If SNTP server synchronization is required, identify the details of one or two SNTP servers: IP address, port number and server key. ⢠Decide whether or not to authenticate received NTP messages using an MD5 signature. Planning for HTTPS/TLS operation Before starting to configure HTTPS/TLS operation, ensure that the cryptographic material listed in Table 59 is available. Table 59 HTTPS/TLS security material Item Description Quantity required Key of Keys An encryption key generated using a cryptographic key generator. The key length is dictated by the installed license key. License keys with AES-128 will require a key of keys of 128-bits. License keys with AES-256 will require a key of keys of 256-bits. The key output should be in ASCII hexadecimal characters. Two per link. For greater security, each link end should be allocated a unique Key of Keys. Page 3-51 Chapter 3: System planning Security planning Item Description Quantity required TLS Private Key and Public Certificates An RSA private key of size 2048 bits, generated in either PKCS#1 or PKCS#5 format, unencrypted, and encoded in the ASN.1 DER format. Two pairs per link. These items are unique to IP address. An X.509 certificate containing an RSA public key, generated in either PKCS#1 or PKCS#5 format, unencrypted, and encoded in the ASN.1 DER format. The public key certificate must have Common Name equal to the IPv4 or IPv6 address of the ODU. The public key certificate must form a valid pair with the private key. User Defined Security Banner The banner provides warnings and notices to be read by the user before logging in to the ODU. Use text that is appropriate to the network security policy. Normally one per link. This depends upon network policy. Entropy Input This must be of size 512 bits (128 hexadecimal characters), output from a random number generator. Two per link. For greater security, each link end should be allocated a unique Entropy Input. Wireless Link Encryption Key for AES An encryption key generated using a cryptographic key generator. The key length is dictated by the selected AES encryption algorithm (128 or 256 bits). One per link. The same encryption key is required at each link end. Port numbers for HTTP, HTTPS and Telnet Port numbers allocated by the network. As allocated by network. Planning for SNMPv3 operation SNMP security mode Decide how SNMPv3 security will be configured. MIB-based security management uses standard SNMPv3 MIBs to configure the user-based security model and the view-based access control model. This approach provides considerable flexibility, allowing a network operator to tailor views and security levels appropriate for different types of user. MIB-based security management may allow a network operator to take advantage of built-in security management capabilities of existing network managers. Page 3-52 Chapter 3: System planning Security planning Web-based security management allows an operator to configure users, security levels, privacy and authentication protocols, and passphrases using the PTP 700 web-based management interface. The capabilities supported are somewhat less flexible than those supported using the MIB-based security management, but will be sufficient in many applications. Selection of webbased management for SNMPv3 security disables the MIB-based security management. PTP 700 does not support concurrent use of MIB-based and web-based management of SNMPv3 security. Web-based management of SNMPv3 security Initial configuration of SNMPv3 security is available only to HTTP or HTTPS/TLS user accounts with security role of Security Officer. Identify the minimum security role of HTTP or HTTPS/TLS user accounts that will be permitted access for web-based management of SNMPv3 security. The following roles are available: ⢠System Administrator ⢠Security Officer Identify the format used for SNMP Engine ID. The following formats are available: ⢠MAC address (default) ⢠IPv4 address ⢠Text string ⢠IPv6 address If SNMP Engine ID will be based on a text string, identify the text string required by the network management system. This is often based on some identifier that survives replacement of the PTP hardware. Identify the user names and security roles of initial SNMPv3 users. Two security roles are available: ⢠Read Only ⢠System Administrator Identify the security level for each of the security roles. Three security levels are available: (a) No authentication, no privacy; (b) Authentication, no privacy; (c) Authentication, privacy. If authentication is required, identify the protocol. Two authentication protocols are available: MD5 or SHA. If privacy will be used, identify the protocol. Two privacy protocols are available: DES or AES (an AES 128-bit or 256-bit capability upgrade must be purchased). If authentication or authentication and privacy protocols are required, identify passphrases for each protocol for each SNMP user. It is considered good practice to use different passphrases for authentication and privacy. Passphrases must have length between 8 and 32 characters, and may contain any of the characters listed in Table 60. Page 3-53 Chapter 3: System planning Security planning Table 60 Permitted character set for SNMPv3 passphrases Character Code Character Code32 59 33 60 â 34 61 35 62 36 63 37 64 38 A..Z 65..90 39 91 40 92 41 93 42 94 43 95 44 96 45 a..z 97..122 46 123 47 124 0..9 48..57 125 58 126 Identify up to two SNMP users that will be configured to receive notifications (traps). Identify the Internet address (IPv4 or IPv6) and UDP port number of the associated SNMP manager. Page 3-54 Chapter 3: System planning Security planning SNMPv3 default configuration (MIB-based) When SNMPv3 MIB-based Security Mode is enabled, the default configuration for the usmUserTable table is based on one initial user and four template users as listed in Table 61. Table 61 Default SNMPv3 users Object Entry 1 Name initial SecurityName initial AuthProtocol usmHMACMD5AuthProtocol PrivProtocol usmDESPrivProtocol StorageType nonVolatile Object Entry 2 Entry 3 Name templateMD5_DES templateSHA_DES SecurityName templateMD5_DES templateSHA_DES AuthProtocol usmHMACMD5AuthProtocol usmHMACSAHAuthProtocol PrivProtocol usmDESPrivProtocol usmDESPrivProtocol StorageType nonVolatile nonVolatile Object Entry 4 Entry 5 Name templateMD5_AES templateSHA_AES SecurityName templateMD5_AES templateSHA_AES AuthProtocol usmHMACMD5AuthProtocol usmHMACSHAAuthProtocol PrivProtocol usmAESPrivProtocol usmAESPrivProtocol StorageType nonVolatile nonVolatile Page 3-55 Chapter 3: System planning Security planning VACM default configuration The default user initial is assigned to VACM group initial in the vacmSecurityToGroupTable table. The template users are not assigned to a group. PTP 700 creates default view trees and access as shown in Table 62 and Table 63. Table 62 Default VACM view trees Object Entry 1 Entry 2 ViewName internet restricted Subtree 1.3.6.1 1.3.6.1 Mask ââ ââ Type included included StorageType nonVolatile nonvolatile Table 63 Default data fill for access table Object Entry 1 Entry 2 GroupName initial initial ContextPrefix ââ ââ SecurityLevel authNoPriv noAuthNoPriv ContextMatch exact exact ReadViewName internet restricted WriteViewName internet ââ NotifyViewName internet restricted StorageType nonVolatile nonVolatile Page 3-56 Chapter 3: System planning Security planning Planning for RADIUS operation Configure RADIUS where remote authentication is required for users of the web-based interface. Remote authentication has the following advantages: ⢠Control of passwords can be centralized. ⢠Management of user accounts can be more sophisticated. For example; users can be prompted by a network manager to change passwords at regular intervals. As another example, passwords can be checked for inclusion of dictionary words and phrases. ⢠Passwords can be updated without reconfiguring multiple network elements. ⢠User accounts can be disabled without reconfiguring multiple network elements. Remote authentication has one significant disadvantage in a wireless link product such as PTP 700. If the wireless link is down, a unit on the remote side of the broken link may be prevented from contacting a RADIUS Server, with the result that users are unable to access the web-based interface. One useful strategy would be to combine RADIUS authentication for normal operation with a single locally-authenticated user account for emergency use. PTP 700 provides a choice of the following authentication methods: ⢠CHAP ⢠MS-CHAPv2 Ensure that the authentication method selected in PTP 700 is supported by the RADIUS server. Note RADIUS is not permitted in FIPS 140-2 applications. Ensure that the RADIUS feature is disabled in FIPS 140-2 approved mode. RADIUS attributes If the standard RADIUS attribute session-timeout (Type 27) is present in a RADIUS response, PTP 700 sets a maximum session length for the authenticated user. If the attribute is absent, the maximum session length is infinite. If the standard RADIUS attribute idle-timeout (Type 28) is present in a RADIUS response, PTP 700 overrides the Auto Logout Timer with this value in the authenticated session. If the vendor-specific RADIUS attribute auth-role is present in a RADIUS response, PTP 700 selects the role for the authenticated user according to auth-role. The supported values of auth-role are as follows: ⢠0: Invalid role. The user is not admitted. ⢠1: Read Only ⢠2: System Administrator ⢠3: Security Officer Page 3-57 Chapter 3: System planning Security planning If the vendor-specific auth-role attribute is absent, but the standard service-type (Type 6) attribute is present, PTP 700 selects the role for the authenticated user according to service-type. The supported values of service-type are as follows: ⢠Login(1): Read Only ⢠Administrative(6): System Administrator ⢠NAS Prompt(7): Read Only If the auth-role and service-type attributes are absent, PTP 700 selects the Read Only role. The auth-role vendor-specific attribute is defined in Table 64. Table 64 Definition of auth-role vendor-specific attribute Field Length Value Notes Type 26 Vendor-specific attribute. Length 12 Overall length of the attribute. Vendor ID 17713 The same IANA code used for the SNMP enterprise MIB. Vendor Type auth-role Vendor Length Length of the attribute specific part. AttributeSpecific 0..3 Integer type (32-bit unsigned). Supported values: invalid-role(0), readonly-role(1), system-admin-role(2), security-officer-role(3). Planning for FIPS 140-2 operation If the link is to operate in FIPS 140-2 secure mode, ensure that the following cryptographic material is generated using a FIPS-approved cryptographic generator: ⢠Key of Keys ⢠TLS Private Key and Public Certificates ⢠Entropy Input ⢠Wireless Link Encryption Key for AES Ensure that the web browsers used are enabled for HTTPS/TLS operation using FIPS-approved cipher specifications. Ensure that following attributes of user accounts for the web-based management interface have been configured to match the operatorâs network security policy: ⢠Auto Logout Period. ⢠Maximum Number of Login Attempts. ⢠Login Attempt Lockout. Page 3-58 Chapter 3: System planning ⢠Minimum Password Change Period. ⢠Password Expiry Period. ⢠Webpage Session Control Security planning Ensure that the following are configured: ⢠Password complexity rules reset to best practice values. ⢠User account passwords compliant with the network security policy. ⢠RADIUS authentication disabled. Caution Configure all of the above correctly to ensure that PTP 600 is operating in compliance with the FIPS 140-2 validation. Further reading For information about⌠Refer to⌠Generating security material for the HTTPS/TLS interface Planning for HTTPS/TLS operation on page 3-51 Page 3-59 Chapter 3: System planning System threshold, output power and link loss System threshold, output power and link loss Use the following tables to look up the system threshold (dBm), output power (dBm) and maximum link loss (dB) per channel bandwidth and modulation mode: Band Mode System threshold and output power (dBm) Maximum link loss (dB) 4.5 GHz IP Table 65 Table 66 TDM Table 67 Table 68 IP Table 69 Table 70 TDM Table 71 Table 72 5.1 GHz and 5.2 GHz IP Table 73 Table 74 TDM Table 75 Table 76 5.4 GHz IP Table 77 Table 78 TDM Table 79 Table 80 IP Table 81 Table 82 TDM Table 83 Table 84 4.9 GHz 5.8 GHz Note Maximum link loss has been calculated assuming use of the integrated antenna in PTP 700 Connectorized+Integrated ODUs. Adjust the maximum link loss for alternative antennas by adding (G â 21) for each antenna, where G is the antenna gain. Page 3-60 Chapter 3: System planning System threshold, output power and link loss Table 65 4.5 GHz IP mode: system threshold per channel bandwidth and output power (P) (dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz P (all bands) BPSK 0.63 single -96.6 -95.1 -93.3 -92.0 29 QPSK 0.63 single -93.5 -92.0 -90.2 -88.9 28 QPSK 0.87 single -89.4 -87.9 -86.2 -84.9 28 16QAM 0.63 single -87.1 -85.6 -83.8 -82.6 27 16QAM 0.63 dual -83.2 -81.7 -79.9 -78.7 27 16QAM 0.87 single -82.6 -81.1 -79.4 -78.1 27 16QAM 0.87 dual -79.6 -78.1 -76.3 -75.0 27 64QAM 0.75 single -79.6 -78.1 -76.3 -75.1 26 64QAM 0.75 dual -76.5 -75.0 -73.2 -71.9 26 64QAM 0.92 single -75.7 -74.2 -72.4 -71.2 26 64QAM 0.92 dual -72.4 -70.9 -69.2 -67.9 26 256QAM 0.81 single -72.4 -70.9 -69.1 -67.9 25 256QAM 0.81 dual -68.9 -67.3 -65.6 -64.3 25 Table 66 4.5 GHz IP mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz BPSK 0.63 single 169.6 168.1 166.3 165.0 QPSK 0.63 single 165.5 164.0 162.2 160.9 QPSK 0.87 single 161.4 159.9 158.2 156.9 16QAM 0.63 single 158.1 156.6 154.8 153.6 16QAM 0.63 dual 154.2 152.7 150.9 149.7 16QAM 0.87 single 153.6 152.1 150.4 149.1 16QAM 0.87 dual 150.6 149.1 147.3 146.0 64QAM 0.75 single 149.6 148.1 146.3 145.1 64QAM 0.75 dual 146.5 145.0 143.2 141.9 64QAM 0.92 single 145.7 144.2 142.4 141.2 64QAM 0.92 dual 142.4 140.9 139.2 137.9 256QAM 0.81 single 141.4 139.9 138.1 136.9 256QAM 0.81 dual 137.9 136.3 134.6 133.3 Page 3-61 Chapter 3: System planning System threshold, output power and link loss Table 67 4.5 GHz TDM mode:system threshold per channel bandwidth and output power (P) (dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz P (all bands) BPSK 0.63 single -96.6 -95.1 -93.3 -92.0 29 QPSK 0.63 single -90.4 -88.9 -87.2 -85.9 28 QPSK 0.87 single -86.4 -84.9 -83.1 -81.9 28 16QAM 0.63 single -84.1 -82.6 -80.8 -79.5 27 16QAM 0.63 dual -80.1 -78.6 -76.8 -75.6 27 16QAM 0.87 single -79.5 -78.0 -76.2 -75.0 27 16QAM 0.87 dual -76.4 -74.8 -73.1 -71.8 27 64QAM 0.75 single -76.3 -74.8 -73.0 -71.7 26 64QAM 0.75 dual -73.0 -71.5 -69.8 -68.5 26 64QAM 0.92 single -73.9 -72.3 -70.6 -69.3 26 64QAM 0.92 dual -70.5 -69.0 -67.2 -65.9 26 256QAM 0.81 single -72.4 -70.9 -69.1 -67.9 25 256QAM 0.81 dual -68.9 -67.3 -65.6 -64.3 25 Table 68 4.5 GHz TDM mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz BPSK 0.63 single 169.6 168.1 166.3 165.0 QPSK 0.63 single 162.4 160.9 159.2 157.9 QPSK 0.87 single 158.4 156.9 155.1 153.9 16QAM 0.63 single 155.1 153.6 151.8 150.5 16QAM 0.63 dual 151.1 149.6 147.8 146.6 16QAM 0.87 single 150.5 149.0 147.2 146.0 16QAM 0.87 dual 147.4 145.8 144.1 142.8 64QAM 0.75 single 146.3 144.8 143.0 141.7 64QAM 0.75 dual 143.0 141.5 139.8 138.5 64QAM 0.92 single 143.9 142.3 140.6 139.3 64QAM 0.92 dual 140.5 139.0 137.2 135.9 256QAM 0.81 single 141.4 139.9 138.1 136.9 256QAM 0.81 dual 137.9 136.3 134.6 133.3 Page 3-62 Chapter 3: System planning System threshold, output power and link loss Table 69 4.9 GHz IP mode: system threshold per channel bandwidth and output power (P) (dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz P (all bands) BPSK 0.63 single -96.6 -95.1 -93.3 -92.0 29 QPSK 0.63 single -93.5 -92.0 -90.2 -88.9 28 QPSK 0.87 single -89.4 -87.9 -86.2 -84.9 28 16QAM 0.63 single -87.1 -85.6 -83.8 -82.6 27 16QAM 0.63 dual -83.2 -81.7 -79.9 -78.7 27 16QAM 0.87 single -82.6 -81.1 -79.4 -78.1 27 16QAM 0.87 dual -79.6 -78.1 -76.3 -75.0 27 64QAM 0.75 single -79.6 -78.1 -76.3 -75.1 26 64QAM 0.75 dual -76.5 -75.0 -73.2 -71.9 26 64QAM 0.92 single -75.7 -74.2 -72.4 -71.2 26 64QAM 0.92 dual -72.4 -70.9 -69.2 -67.9 26 256QAM 0.81 single -72.4 -70.9 -69.1 -67.9 25 256QAM 0.81 dual -68.9 -67.3 -65.6 -64.3 25 Table 70 4.9 GHz IP mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz BPSK 0.63 single 169.6 168.1 166.3 165.0 QPSK 0.63 single 165.5 164.0 162.2 160.9 QPSK 0.87 single 161.4 159.9 158.2 156.9 16QAM 0.63 single 158.1 156.6 154.8 153.6 16QAM 0.63 dual 154.2 152.7 150.9 149.7 16QAM 0.87 single 153.6 152.1 150.4 149.1 16QAM 0.87 dual 150.6 149.1 147.3 146.0 64QAM 0.75 single 149.6 148.1 146.3 145.1 64QAM 0.75 dual 146.5 145.0 143.2 141.9 64QAM 0.92 single 145.7 144.2 142.4 141.2 64QAM 0.92 dual 142.4 140.9 139.2 137.9 256QAM 0.81 single 141.4 139.9 138.1 136.9 256QAM 0.81 dual 137.9 136.3 134.6 133.3 Page 3-63 Chapter 3: System planning System threshold, output power and link loss Table 71 4.9 GHz TDM mode:system threshold per channel bandwidth and output power (P) (dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz P (all bands) BPSK 0.63 single -96.6 -95.1 -93.3 -92.0 29 QPSK 0.63 single -90.4 -88.9 -87.2 -85.9 28 QPSK 0.87 single -86.4 -84.9 -83.1 -81.9 28 16QAM 0.63 single -84.1 -82.6 -80.8 -79.5 27 16QAM 0.63 dual -80.1 -78.6 -76.8 -75.6 27 16QAM 0.87 single -79.5 -78.0 -76.2 -75.0 27 16QAM 0.87 dual -76.4 -74.8 -73.1 -71.8 27 64QAM 0.75 single -76.3 -74.8 -73.0 -71.7 26 64QAM 0.75 dual -73.0 -71.5 -69.8 -68.5 26 64QAM 0.92 single -73.9 -72.3 -70.6 -69.3 26 64QAM 0.92 dual -70.5 -69.0 -67.2 -65.9 26 256QAM 0.81 single -72.4 -70.9 -69.1 -67.9 25 256QAM 0.81 dual -68.9 -67.3 -65.6 -64.3 25 Table 72 4.9 GHz TDM mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz BPSK 0.63 single 169.6 168.1 166.3 165.0 QPSK 0.63 single 162.4 160.9 159.2 157.9 QPSK 0.87 single 158.4 156.9 155.1 153.9 16QAM 0.63 single 155.1 153.6 151.8 150.5 16QAM 0.63 dual 151.1 149.6 147.8 146.6 16QAM 0.87 single 150.5 149.0 147.2 146.0 16QAM 0.87 dual 147.4 145.8 144.1 142.8 64QAM 0.75 single 146.3 144.8 143.0 141.7 64QAM 0.75 dual 143.0 141.5 139.8 138.5 64QAM 0.92 single 143.9 142.3 140.6 139.3 64QAM 0.92 dual 140.5 139.0 137.2 135.9 256QAM 0.81 single 141.4 139.9 138.1 136.9 256QAM 0.81 dual 137.9 136.3 134.6 133.3 Page 3-64 Chapter 3: System planning System threshold, output power and link loss Table 73 5.1/5.2 GHz IP mode: system threshold per channel bandwidth and o/p power (P) (dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz P (all bands) BPSK 0.63 single -95.8 -94.3 -92.5 -91.3 -89.5 -88.3 -87.8 29 QPSK 0.63 single -92.7 -91.2 -89.4 -88.2 -86.4 -85.2 -84.7 28 QPSK 0.87 single -88.7 -87.2 -85.4 -84.2 -82.4 -81.2 -80.7 28 16QAM 0.63 single -86.4 -84.9 -83.1 -81.9 -80.1 -78.8 -78.3 27 16QAM 0.63 dual -82.4 -80.9 -79.2 -77.9 -76.2 -74.9 -74.4 27 16QAM 0.87 single -81.9 -80.4 -78.6 -77.4 -75.6 -74.4 -73.8 27 16QAM 0.87 dual -78.8 -77.3 -75.6 -74.3 -72.6 -71.3 -70.8 27 64QAM 0.75 single -78.9 -77.4 -75.6 -74.3 -72.6 -71.3 -70.8 26 64QAM 0.75 dual -75.8 -74.3 -72.5 -71.2 -69.5 -68.2 -67.7 26 64QAM 0.92 single -75.0 -73.5 -71.7 -70.5 -68.7 -67.5 -67.0 26 64 QAM 0.92 dual -71.8 -70.3 -68.5 -67.3 -65.5 -64.3 -63.7 26 256QAM 0.81 single -71.8 -70.3 -68.6 -67.3 -65.6 -64.3 -63.8 25 256QAM 0.81 dual -68.4 -66.9 -65.1 -63.8 -62.1 -60.8 -60.3 25 Table 74 5.1 GHz and 5.2 GHz IP mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz BPSK 0.63 single 168.8 167.3 165.5 164.3 162.5 161.3 160.8 QPSK 0.63 single 164.7 163.2 161.4 160.2 158.4 157.2 156.7 QPSK 0.87 single 160.7 159.2 157.4 156.2 154.4 153.2 152.7 16QAM 0.63 single 157.4 155.9 154.1 152.9 151.1 149.8 149.3 16QAM 0.63 dual 153.4 151.9 150.2 148.9 147.2 145.9 145.4 16QAM 0.87 single 152.9 151.4 149.6 148.4 146.6 145.4 144.8 16QAM 0.87 dual 149.8 148.3 146.6 145.3 143.6 142.3 141.8 64QAM 0.75 single 148.9 147.4 145.6 144.3 142.6 141.3 140.8 64QAM 0.75 dual 145.8 144.3 142.5 141.2 139.5 138.2 137.7 64QAM 0.92 single 145.0 143.5 141.7 140.5 138.7 137.5 137.0 64 QAM 0.92 dual 141.8 140.3 138.5 137.3 135.5 134.3 133.7 256QAM 0.81 single 140.8 139.3 137.6 136.3 134.6 133.3 132.8 256QAM 0.81 dual 137.4 135.9 134.1 132.8 131.1 129.8 129.3 Page 3-65 Chapter 3: System planning System threshold, output power and link loss Table 75 5.1/5.2 GHz TDM mode: system threshold per channel bandwidth and o/p pwr (P) (dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz P (all bands) BPSK 0.63 single -95.8 -94.3 -92.5 -91.3 -89.5 -88.3 -87.8 29 QPSK 0.63 single -89.7 -88.2 -86.4 -85.2 -83.4 -82.2 -81.7 28 QPSK 0.87 single -85.7 -84.2 -82.4 -81.1 -79.4 -78.1 -77.6 28 16QAM 0.63 single -83.3 -81.8 -80.1 -78.8 -77.0 -75.8 -75.3 27 16QAM 0.63 dual -79.4 -77.8 -76.1 -74.8 -73.1 -71.8 -71.3 27 16QAM 0.87 single -78.8 -77.2 -75.5 -74.2 -72.5 -71.2 -70.7 27 16QAM 0.87 dual -75.7 -74.1 -72.4 -71.1 -69.4 -68.1 -67.6 27 64QAM 0.75 single -75.6 -74.1 -72.3 -71.1 -69.3 -68.1 -67.5 26 64QAM 0.75 dual -72.4 -70.9 -69.1 -67.9 -66.1 -64.9 -64.3 26 64QAM 0.92 single -73.2 -71.7 -70.0 -68.7 -66.9 -65.7 -65.2 26 64 QAM 0.92 dual -69.9 -68.4 -66.6 -65.4 -63.6 -62.4 -61.8 26 256QAM 0.81 single -71.8 -70.3 -68.6 -67.3 -65.6 -64.3 -63.8 25 256QAM 0.81 dual -68.4 -66.9 -65.1 -63.8 -62.1 -60.8 -60.3 25 Table 76 5.1 GHz and 5.2 GHz TDM mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz BPSK 0.63 single 168.8 167.3 165.5 164.3 162.5 161.3 160.8 QPSK 0.63 single 161.7 160.2 158.4 157.2 155.4 154.2 153.7 QPSK 0.87 single 157.7 156.2 154.4 153.1 151.4 150.1 149.6 16QAM 0.63 single 154.3 152.8 151.1 149.8 148.0 146.8 146.3 16QAM 0.63 dual 150.4 148.8 147.1 145.8 144.1 142.8 142.3 16QAM 0.87 single 149.8 148.2 146.5 145.2 143.5 142.2 141.7 16QAM 0.87 dual 146.7 145.1 143.4 142.1 140.4 139.1 138.6 64QAM 0.75 single 145.6 144.1 142.3 141.1 139.3 138.1 137.5 64QAM 0.75 dual 142.4 140.9 139.1 137.9 136.1 134.9 134.3 64QAM 0.92 single 143.2 141.7 140.0 138.7 136.9 135.7 135.2 64 QAM 0.92 dual 139.9 138.4 136.6 135.4 133.6 132.4 131.8 256QAM 0.81 single 140.8 139.3 137.6 136.3 134.6 133.3 132.8 256QAM 0.81 dual 137.4 135.9 134.1 132.8 131.1 129.8 129.3 Page 3-66 Chapter 3: System planning System threshold, output power and link loss Table 77 5.4 GHz IP mode: system threshold per channel bandwidth and output power (P) (dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz P (all bands) BPSK 0.63 single -96.6 -94.6 -92.8 -91.5 -89.8 -88.5 -88.0 29 QPSK 0.63 single -93.5 -91.5 -89.7 -88.4 -86.7 -85.4 -84.9 28 QPSK 0.87 single -89.4 -87.4 -85.7 -84.4 -82.7 -81.4 -80.9 28 16QAM 0.63 single -87.1 -85.1 -83.4 -82.1 -80.3 -79.1 -78.6 27 16QAM 0.63 dual -83.2 -81.2 -79.4 -78.2 -76.4 -75.2 -74.6 27 16QAM 0.87 single -82.6 -80.6 -78.9 -77.6 -75.9 -74.6 -74.1 27 16QAM 0.87 dual -79.6 -77.6 -75.8 -74.6 -72.8 -71.6 -71.0 27 64QAM 0.75 single -79.6 -77.6 -75.8 -74.6 -72.8 -71.6 -71.1 26 64QAM 0.75 dual -76.5 -74.5 -72.7 -71.5 -69.7 -68.5 -68.0 26 64QAM 0.92 single -75.8 -73.8 -72.0 -70.7 -69.0 -67.7 -67.2 26 64 QAM 0.92 dual -72.5 -70.5 -68.8 -67.5 -65.8 -64.5 -64.0 26 256QAM 0.81 single -72.6 -70.6 -68.8 -67.6 -65.8 -64.6 -64.0 25 256QAM 0.81 dual -69.1 -67.1 -65.3 -64.1 -62.3 -61.1 -60.6 25 Table 78 5.4 GHz IP mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz BPSK 0.63 single 169.6 167.6 165.8 164.5 162.8 161.5 161.0 QPSK 0.63 single 165.5 163.5 161.7 160.4 158.7 157.4 156.9 QPSK 0.87 single 161.4 159.4 157.7 156.4 154.7 153.4 152.9 16QAM 0.63 single 158.1 156.1 154.4 153.1 151.3 150.1 149.6 16QAM 0.63 dual 154.2 152.2 150.4 149.2 147.4 146.2 145.6 16QAM 0.87 single 153.6 151.6 149.9 148.6 146.9 145.6 145.1 16QAM 0.87 dual 150.6 148.6 146.8 145.6 143.8 142.6 142.0 64QAM 0.75 single 149.6 147.6 145.8 144.6 142.8 141.6 141.1 64QAM 0.75 dual 146.5 144.5 142.7 141.5 139.7 138.5 138.0 64QAM 0.92 single 145.8 143.8 142.0 140.7 139.0 137.7 137.2 64 QAM 0.92 dual 142.5 140.5 138.8 137.5 135.8 134.5 134.0 256QAM 0.81 single 141.6 139.6 137.8 136.6 134.8 133.6 133.0 256QAM 0.81 dual 138.1 136.1 134.3 133.1 131.3 130.1 129.6 Page 3-67 Chapter 3: System planning System threshold, output power and link loss Table 79 5.4 GHz TDM mode: system threshold per channel bandwidth and output power (P)(dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz P (all bands) BPSK 0.63 single -96.6 -94.6 -92.8 -91.5 -89.8 -88.5 -88.0 29 QPSK 0.63 single -90.5 -88.4 -86.7 -85.4 -83.7 -82.4 -81.9 28 QPSK 0.87 single -86.4 -84.4 -82.6 -81.4 -79.6 -78.4 -77.9 28 16QAM 0.63 single -84.1 -82.1 -80.3 -79.1 -77.3 -76.0 -75.5 27 16QAM 0.63 dual -80.1 -78.1 -76.3 -75.1 -73.3 -72.1 -71.6 27 16QAM 0.87 single -79.5 -77.5 -75.7 -74.5 -72.7 -71.5 -71.0 27 16QAM 0.87 dual -76.4 -74.4 -72.6 -71.4 -69.6 -68.4 -67.9 27 64QAM 0.75 single -76.3 -74.3 -72.6 -71.3 -69.6 -68.3 -67.8 26 64QAM 0.75 dual -73.1 -71.1 -69.4 -68.1 -66.4 -65.1 -64.6 26 64QAM 0.92 single -74.0 -72.0 -70.2 -69.0 -67.2 -65.9 -65.4 26 64 QAM 0.92 dual -70.6 -68.6 -66.9 -65.6 -63.9 -62.6 -62.1 26 256QAM 0.81 single -72.6 -70.6 -68.8 -67.6 -65.8 -64.6 -64.0 25 256QAM 0.81 dual -69.1 -67.1 -65.3 -64.1 -62.3 -61.1 -60.6 25 Table 80 5.4 GHz TDM mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz BPSK 0.63 single 169.6 167.6 165.8 164.5 162.8 161.5 161.0 QPSK 0.63 single 162.5 160.4 158.7 157.4 155.7 154.4 153.9 QPSK 0.87 single 158.4 156.4 154.6 153.4 151.6 150.4 149.9 16QAM 0.63 single 155.1 153.1 151.3 150.1 148.3 147.0 146.5 16QAM 0.63 dual 151.1 149.1 147.3 146.1 144.3 143.1 142.6 16QAM 0.87 single 150.5 148.5 146.7 145.5 143.7 142.5 142.0 16QAM 0.87 dual 147.4 145.4 143.6 142.4 140.6 139.4 138.9 64QAM 0.75 single 146.3 144.3 142.6 141.3 139.6 138.3 137.8 64QAM 0.75 dual 143.1 141.1 139.4 138.1 136.4 135.1 134.6 64QAM 0.92 single 144.0 142.0 140.2 139.0 137.2 135.9 135.4 64 QAM 0.92 dual 140.6 138.6 136.9 135.6 133.9 132.6 132.1 256QAM 0.81 single 141.6 139.6 137.8 136.6 134.8 133.6 133.0 256QAM 0.81 dual 138.1 136.1 134.3 133.1 131.3 130.1 129.6 Page 3-68 Chapter 3: System planning System threshold, output power and link loss Table 81 5.8 GHz IP mode: system threshold per channel bandwidth and output power (P) (dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz P (all bands) BPSK 0.63 single -96.8 -94.8 -93.0 -91.8 -90.0 -88.8 -88.3 29 QPSK 0.63 single -93.7 -91.7 -89.9 -88.7 -86.9 -85.7 -85.2 28 QPSK 0.87 single -89.7 -87.7 -85.9 -84.7 -82.9 -81.7 -81.1 28 16QAM 0.63 single -87.4 -85.4 -83.6 -82.3 -80.6 -79.3 -78.8 27 16QAM 0.63 dual -83.4 -81.4 -79.6 -78.4 -76.6 -75.4 -74.9 27 16QAM 0.87 single -82.9 -80.8 -79.1 -77.8 -76.1 -74.8 -74.3 27 16QAM 0.87 dual -79.8 -77.8 -76.0 -74.8 -73.0 -71.8 -71.2 27 64QAM 0.75 single -79.8 -77.8 -76.0 -74.8 -73.0 -71.8 -71.2 26 64QAM 0.75 dual -76.7 -74.7 -72.9 -71.6 -69.9 -68.6 -68.1 26 64QAM 0.92 single -75.8 -73.8 -72.1 -70.8 -69.1 -67.8 -67.3 26 64 QAM 0.92 dual -72.5 -70.5 -68.8 -67.5 -65.8 -64.5 -64.0 26 256QAM 0.81 single -72.5 -70.5 -68.7 -67.4 -65.7 -64.4 -63.9 25 256QAM 0.81 dual -68.8 -66.8 -65.0 -63.8 -62.0 -60.8 -60.3 25 Table 82 5.8 GHz IP mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz BPSK 0.63 single 169.8 167.8 166.0 164.8 163.0 161.8 161.3 QPSK 0.63 single 165.7 163.7 161.9 160.7 158.9 157.7 157.2 QPSK 0.87 single 161.7 159.7 157.9 156.7 154.9 153.7 153.1 16QAM 0.63 single 158.4 156.4 154.6 153.3 151.6 150.3 149.8 16QAM 0.63 dual 154.4 152.4 150.6 149.4 147.6 146.4 145.9 16QAM 0.87 single 153.9 151.8 150.1 148.8 147.1 145.8 145.3 16QAM 0.87 dual 150.8 148.8 147.0 145.8 144.0 142.8 142.2 64QAM 0.75 single 149.8 147.8 146.0 144.8 143.0 141.8 141.2 64QAM 0.75 dual 146.7 144.7 142.9 141.6 139.9 138.6 138.1 64QAM 0.92 single 145.8 143.8 142.1 140.8 139.1 137.8 137.3 64 QAM 0.92 dual 142.5 140.5 138.8 137.5 135.8 134.5 134.0 256QAM 0.81 single 141.5 139.5 137.7 136.4 134.7 133.4 132.9 256QAM 0.81 dual 137.8 135.8 134.0 132.8 131.0 129.8 129.3 Page 3-69 Chapter 3: System planning System threshold, output power and link loss Table 83 5.8 GHz TDM mode: system threshold per channel bandwidth and output power (P)(dBm) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz P (all bands) BPSK 0.63 single -96.8 -94.8 -93.0 -91.8 -90.0 -88.8 -88.3 29 QPSK 0.63 single -90.7 -88.7 -86.9 -85.7 -83.9 -82.7 -82.2 28 QPSK 0.87 single -86.7 -84.6 -82.9 -81.6 -79.9 -78.6 -78.1 28 16QAM 0.63 single -84.3 -82.3 -80.5 -79.3 -77.5 -76.3 -75.8 27 16QAM 0.63 dual -80.3 -78.3 -76.5 -75.3 -73.5 -72.3 -71.8 27 16QAM 0.87 single -79.7 -77.7 -75.9 -74.7 -72.9 -71.7 -71.1 27 16QAM 0.87 dual -76.6 -74.5 -72.8 -71.5 -69.8 -68.5 -68.0 27 64QAM 0.75 single -76.4 -74.4 -72.7 -71.4 -69.6 -68.4 -67.9 26 64QAM 0.75 dual -73.2 -71.2 -69.4 -68.2 -66.4 -65.1 -64.6 26 64QAM 0.92 single -74.0 -72.0 -70.2 -68.9 -67.2 -65.9 -65.4 26 64 QAM 0.92 dual -70.5 -68.5 -66.7 -65.5 -63.7 -62.5 -62.0 26 256QAM 0.81 single -72.5 -70.5 -68.7 -67.4 -65.7 -64.4 -63.9 25 256QAM 0.81 dual -68.8 -66.8 -65.0 -63.8 -62.0 -60.8 -60.3 25 Table 84 5.8 GHz TDM mode: maximum link loss per channel bandwidth (dB) Modulation mode 5 MHz 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz BPSK 0.63 single 169.8 167.8 166.0 164.8 163.0 161.8 161.3 QPSK 0.63 single 162.7 160.7 158.9 157.7 155.9 154.7 154.2 QPSK 0.87 single 158.7 156.6 154.9 153.6 151.9 150.6 150.1 16QAM 0.63 single 155.3 153.3 151.5 150.3 148.5 147.3 146.8 16QAM 0.63 dual 151.3 149.3 147.5 146.3 144.5 143.3 142.8 16QAM 0.87 single 150.7 148.7 146.9 145.7 143.9 142.7 142.1 16QAM 0.87 dual 147.6 145.5 143.8 142.5 140.8 139.5 139.0 64QAM 0.75 single 146.4 144.4 142.7 141.4 139.6 138.4 137.9 64QAM 0.75 dual 143.2 141.2 139.4 138.2 136.4 135.1 134.6 64QAM 0.92 single 144.0 142.0 140.2 138.9 137.2 135.9 135.4 64 QAM 0.92 dual 140.5 138.5 136.7 135.5 133.7 132.5 132.0 256QAM 0.81 single 141.5 139.5 137.7 136.4 134.7 133.4 132.9 256QAM 0.81 dual 137.8 135.8 134.0 132.8 131.0 129.8 129.3 Page 3-70 Chapter 3: System planning Data throughput capacity tables Data throughput capacity tables Use the following tables to look up the data throughput rates (Mbits/s) that are achieved when two PTP 700 ODUs are linked and the link distance (range) is 0 km: PTP 700 variant Link symmetry Link optimization Table Full 1:1 IP Table 85 TDM Table 86 IP Table 87 TDM Table 88 3:1 IP Table 89 5:1 IP Table 90 Adaptive IP Table 91 1:1 IP Table 92 TDM Table 93 IP Table 94 TDM Table 95 3:1 IP Table 96 5:1 IP Table 97 2:1 Lite 2:1 Use the following range adjustment graphs to look up the link range and find the throughput factor that must be applied to adjust the 0 km data throughput rates: Link symmetry Link optimization 1:1 Bandwidth 45 MHz 40 MHz 30 MHz 20 MHz IP Figure 65 Figure 66 Figure 67 Figure 68 TDM Figure 72 Figure 73 Figure 74 Figure 75 IP Figure 79 Figure 80 Figure 81 Figure 82 TDM Figure 85 Figure 86 Figure 87 Figure 88 3:1 IP Figure 91 Figure 92 Figure 93 Figure 94 5:1 IP Figure 97 Figure 98 Figure 99 Adaptive IP Figure 100 Figure 101 Figure 102 Figure 103 2:1 Page 3-71 Chapter 3: System planning Link symmetry Link optimization 1:1 Data throughput capacity tables Bandwidth 15 MHz 10 MHz 5 MHz IP Figure 69 Figure 70 Figure 71 TDM Figure 76 Figure 77 Figure 78 IP Figure 83 Figure 84 TDM Figure 89 Figure 90 3:1 IP Figure 95 Figure 96 5:1 IP Adaptive IP Figure 104 Figure 105 2:1 Note Throughput for link symmetry 5:1, 3:1 and 2:1 are the same as 1:5, 1:3, and 1:2; but the Tx and Rx data rates are swapped. Page 3-72 Chapter 3: System planning Data throughput capacity tables Table 85 Throughput at zero link range (Mbit/s), Full, symmetry 1:1, optimization IP Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 226.1 226.1 452.2 206.3 206.3 412.6 64QAM 0.92 dual 190.5 190.5 381.0 173.8 173.8 347.6 64QAM 0.75 dual 155.7 155.7 311.3 142.0 142.0 284.1 16QAM 0.87 dual 121.1 121.1 242.2 110.5 110.5 221.0 16QAM 0.63 dual 87.1 87.1 174.1 79.4 79.4 158.9 256QAM 0.81 single 113.0 113.0 226.1 103.1 103.1 206.3 64QAM 0.92 single 95.2 95.2 190.5 86.9 86.9 173.8 64QAM 0.75 single 77.8 77.8 155.7 71.0 71.0 142.0 16QAM 0.87 single 60.5 60.5 121.1 55.2 55.2 110.5 16QAM 0.63 single 43.5 43.5 87.0 39.7 39.7 79.4 QPSK 0.87 single 30.3 30.3 60.5 27.6 27.6 55.2 QPSK 0.63 single 21.8 21.8 43.5 19.9 19.9 39.7 BPSK 0.63 single 10.9 10.9 21.8 9.9 9.9 19.9 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 151.1 151.1 302.2 100.0 100.0 200.1 64QAM 0.92 dual 127.3 127.3 254.6 84.3 84.3 168.6 64QAM 0.75 dual 104.0 104.0 208.1 68.9 68.9 137.8 16QAM 0.87 dual 80.9 80.9 161.9 53.6 53.6 107.2 16QAM 0.63 dual 58.2 58.2 116.4 38.5 38.5 77.0 256QAM 0.81 single 75.5 75.5 151.1 50.0 50.0 100.0 64QAM 0.92 single 63.7 63.7 127.3 42.1 42.1 84.3 64QAM 0.75 single 52.0 52.0 104.0 34.4 34.4 68.9 16QAM 0.87 single 40.5 40.5 80.9 26.8 26.8 53.6 16QAM 0.63 single 29.1 29.1 58.2 19.3 19.3 38.5 QPSK 0.87 single 20.2 20.2 40.5 13.4 13.4 26.8 QPSK 0.63 single 14.5 14.5 29.1 9.6 9.6 19.3 BPSK 0.63 single 7.3 7.3 14.5 4.8 4.8 9.6 Page 3-73 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 75.4 75.4 150.7 50.1 50.1 100.2 64QAM 0.92 dual 63.5 63.5 127.0 42.2 42.2 84.4 64QAM 0.75 dual 51.9 51.9 103.8 34.5 34.5 69.0 16QAM 0.87 dual 40.4 40.4 80.7 26.8 26.8 53.7 16QAM 0.63 dual 29.0 29.0 58.0 19.3 19.3 38.6 256QAM 0.81 single 37.7 37.7 75.4 25.0 25.0 50.1 64QAM 0.92 single 31.7 31.7 63.5 21.1 21.1 42.2 64QAM 0.75 single 25.9 25.9 51.9 17.2 17.2 34.5 16QAM 0.87 single 20.2 20.2 40.4 13.4 13.4 26.8 16QAM 0.63 single 14.5 14.5 29.0 9.6 9.6 19.3 QPSK 0.87 single 10.1 10.1 20.2 6.7 6.7 13.4 QPSK 0.63 single 7.3 7.3 14.5 4.8 4.8 9.6 BPSK 0.63 single 3.6 3.6 7.2 2.4 2.4 4.8 Modulation mode 5 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 24.2 24.2 48.4 64QAM 0.92 dual 20.4 20.4 40.8 64QAM 0.75 dual 16.7 16.7 33.3 16QAM 0.87 dual 13.0 13.0 25.9 16QAM 0.63 dual 9.3 9.3 18.6 256QAM 0.81 single 12.1 12.1 24.2 64QAM 0.92 single 10.2 10.2 20.4 64QAM 0.75 single 8.3 8.3 16.7 16QAM 0.87 single 6.5 6.5 13.0 16QAM 0.63 single 4.7 4.7 9.3 QPSK 0.87 single 3.2 3.2 6.5 QPSK 0.63 single 2.3 2.3 4.7 BPSK 0.63 single 1.2 1.2 2.3 Page 3-74 Chapter 3: System planning Data throughput capacity tables Table 86 Throughput at zero link range (Mbit/s), Full, symmetry 1:1, optimization TDM Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 202.1 202.1 404.1 186.1 186.1 372.1 64QAM 0.92 dual 170.2 170.2 340.5 156.8 156.8 313.5 64QAM 0.75 dual 139.1 139.1 278.2 128.1 128.1 256.2 16QAM 0.87 dual 108.2 108.2 216.5 99.7 99.7 199.3 16QAM 0.63 dual 77.8 77.8 155.6 71.6 71.6 143.3 256QAM 0.81 single 101.0 101.0 202.1 93.0 93.0 186.1 64QAM 0.92 single 85.1 85.1 170.2 78.4 78.4 156.8 64QAM 0.75 single 69.6 69.6 139.1 64.0 64.0 128.1 16QAM 0.87 single 54.1 54.1 108.2 49.8 49.8 99.7 16QAM 0.63 single 38.9 38.9 77.8 35.8 35.8 71.6 QPSK 0.87 single 27.1 27.1 54.1 24.9 24.9 49.8 QPSK 0.63 single 19.4 19.4 38.9 17.9 17.9 35.8 BPSK 0.63 single 9.7 9.7 19.4 9.0 9.0 17.9 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 140.9 140.9 281.7 96.0 96.0 192.0 64QAM 0.92 dual 118.7 118.7 237.4 80.9 80.9 161.7 64QAM 0.75 dual 97.0 97.0 194.0 66.1 66.1 132.2 16QAM 0.87 dual 75.5 75.5 150.9 51.4 51.4 102.8 16QAM 0.63 dual 54.2 54.2 108.5 37.0 37.0 73.9 256QAM 0.81 single 70.4 70.4 140.9 48.0 48.0 96.0 64QAM 0.92 single 59.3 59.3 118.7 40.4 40.4 80.9 64QAM 0.75 single 48.5 48.5 97.0 33.0 33.0 66.1 16QAM 0.87 single 37.7 37.7 75.4 25.7 25.7 51.4 16QAM 0.63 single 27.1 27.1 54.2 18.5 18.5 37.0 QPSK 0.87 single 18.9 18.9 37.7 12.8 12.8 25.7 QPSK 0.63 single 13.6 13.6 27.1 9.2 9.2 18.5 BPSK 0.63 single 6.8 6.8 13.6 4.6 4.6 9.2 Page 3-75 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 72.9 72.9 145.8 49.1 49.1 98.2 64QAM 0.92 dual 61.4 61.4 122.8 41.4 41.4 82.8 64QAM 0.75 dual 50.2 50.2 100.4 33.8 33.8 67.6 16QAM 0.87 dual 39.0 39.0 78.1 26.3 26.3 52.6 16QAM 0.63 dual 28.1 28.1 56.1 18.9 18.9 37.8 256QAM 0.81 single 36.4 36.4 72.9 24.6 24.6 49.1 64QAM 0.92 single 30.7 30.7 61.4 20.7 20.7 41.4 64QAM 0.75 single 25.1 25.1 50.2 16.9 16.9 33.8 16QAM 0.87 single 19.5 19.5 39.0 13.2 13.2 26.3 16QAM 0.63 single 14.0 14.0 28.1 9.5 9.5 18.9 QPSK 0.87 single 9.8 9.8 19.5 6.6 6.6 13.1 QPSK 0.63 single 7.0 7.0 14.0 4.7 4.7 9.5 BPSK 0.63 single 3.5 3.5 7.0 2.4 2.4 4.7 Modulation mode 5 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 24.2 24.2 48.4 64QAM 0.92 dual 20.4 20.4 40.8 64QAM 0.75 dual 16.7 16.7 33.3 16QAM 0.87 dual 13.0 13.0 25.9 16QAM 0.63 dual 9.3 9.3 18.6 256QAM 0.81 single 12.1 12.1 24.2 64QAM 0.92 single 10.2 10.2 20.4 64QAM 0.75 single 8.3 8.3 16.7 16QAM 0.87 single 6.5 6.5 13.0 16QAM 0.63 single 4.7 4.7 9.3 QPSK 0.87 single 3.2 3.2 6.5 QPSK 0.63 single 2.3 2.3 4.7 BPSK 0.63 single 1.2 1.2 2.3 Page 3-76 Chapter 3: System planning Data throughput capacity tables Table 87 Throughput at zero link range (Mbit/s), Full, symmetry 2:1, optimization IP Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 299.7 149.9 449.6 273.6 136.8 410.5 64QAM 0.92 dual 252.5 126.3 378.8 230.5 115.3 345.8 64QAM 0.75 dual 206.4 103.2 309.6 188.4 94.2 282.6 16QAM 0.87 dual 160.6 80.3 240.8 146.6 73.3 219.8 16QAM 0.63 dual 115.4 57.7 173.1 105.4 52.7 158.0 256QAM 0.81 single 149.9 74.9 224.8 136.8 68.4 205.2 64QAM 0.92 single 126.3 63.1 189.4 115.3 57.6 172.9 64QAM 0.75 single 103.2 51.6 154.8 94.2 47.1 141.3 16QAM 0.87 single 80.3 40.1 120.4 73.3 36.6 109.9 16QAM 0.63 single 57.7 28.9 86.6 52.7 26.3 79.0 QPSK 0.87 single 40.1 20.1 60.2 36.6 18.3 55.0 QPSK 0.63 single 28.9 14.4 43.3 26.3 13.2 39.5 BPSK 0.63 single 14.4 7.2 21.6 13.2 6.6 19.7 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 200.5 100.2 300.7 133.4 66.7 200.1 64QAM 0.92 dual 168.9 84.5 253.4 112.4 56.2 168.6 64QAM 0.75 dual 138.0 69.0 207.1 91.8 45.9 137.8 16QAM 0.87 dual 107.4 53.7 161.1 71.5 35.7 107.2 16QAM 0.63 dual 77.2 38.6 115.8 51.4 25.7 77.0 256QAM 0.81 single 100.2 50.1 150.4 66.7 33.3 100.0 64QAM 0.92 single 84.5 42.2 126.7 56.2 28.1 84.3 64QAM 0.75 single 69.0 34.5 103.5 45.9 23.0 68.9 16QAM 0.87 single 53.7 26.8 80.5 35.7 17.9 53.6 16QAM 0.63 single 38.6 19.3 57.9 25.7 12.8 38.5 QPSK 0.87 single 26.8 13.4 40.3 17.9 8.9 26.8 QPSK 0.63 single 19.3 9.6 28.9 12.8 6.4 19.3 BPSK 0.63 single 9.6 4.8 14.5 6.4 3.2 9.6 Page 3-77 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 100.5 50.2 150.7 66.3 33.2 99.5 64QAM 0.92 dual 84.7 42.3 127.0 55.9 27.9 83.8 64QAM 0.75 dual 69.2 34.6 103.8 45.7 22.8 68.5 16QAM 0.87 dual 53.8 26.9 80.7 35.5 17.8 53.3 16QAM 0.63 dual 38.7 19.3 58.0 25.5 12.8 38.3 256QAM 0.81 single 50.2 25.1 75.4 33.2 16.6 49.8 64QAM 0.92 single 42.3 21.2 63.5 27.9 14.0 41.9 64QAM 0.75 single 34.6 17.3 51.9 22.8 11.4 34.3 16QAM 0.87 single 26.9 13.5 40.4 17.8 8.9 26.6 16QAM 0.63 single 19.3 9.7 29.0 12.8 6.4 19.2 QPSK 0.87 single 13.5 6.7 20.2 8.9 4.4 13.3 QPSK 0.63 single 9.7 4.8 14.5 6.4 3.2 9.6 BPSK 0.63 single 4.8 2.4 7.2 3.2 1.6 4.8 Page 3-78 Chapter 3: System planning Data throughput capacity tables Table 88 Throughput at zero link range (Mbit/s), Full, symmetry 2:1, optimization TDM Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 280.8 140.4 421.2 257.7 128.9 386.6 64QAM 0.92 dual 236.6 118.3 354.8 217.1 108.6 325.7 64QAM 0.75 dual 193.3 96.7 290.0 177.4 88.7 266.1 16QAM 0.87 dual 150.4 75.2 225.6 138.0 69.0 207.1 16QAM 0.63 dual 108.1 54.1 162.2 99.2 49.6 148.8 256QAM 0.81 single 140.4 70.2 210.6 128.9 64.4 193.3 64QAM 0.92 single 118.3 59.1 177.4 108.6 54.3 162.8 64QAM 0.75 single 96.7 48.3 145.0 88.7 44.4 133.1 16QAM 0.87 single 75.2 37.6 112.8 69.0 34.5 103.5 16QAM 0.63 single 54.1 27.0 81.1 49.6 24.8 74.4 QPSK 0.87 single 37.6 18.8 56.4 34.5 17.3 51.8 QPSK 0.63 single 27.0 13.5 40.5 24.8 12.4 37.2 BPSK 0.63 single 13.5 6.8 20.3 12.4 6.2 18.6 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 193.1 96.5 289.6 130.6 65.3 195.9 64QAM 0.92 dual 162.7 81.3 244.0 110.1 55.0 165.1 64QAM 0.75 dual 132.9 66.5 199.4 89.9 45.0 134.9 16QAM 0.87 dual 103.4 51.7 155.1 70.0 35.0 104.9 16QAM 0.63 dual 74.3 37.2 111.5 50.3 25.1 75.4 256QAM 0.81 single 96.5 48.3 144.8 65.3 32.7 98.0 64QAM 0.92 single 81.3 40.7 122.0 55.0 27.5 82.5 64QAM 0.75 single 66.5 33.2 99.7 45.0 22.5 67.4 16QAM 0.87 single 51.7 25.8 77.5 35.0 17.5 52.5 16QAM 0.63 single 37.2 18.6 55.7 25.1 12.6 37.7 QPSK 0.87 single 25.8 12.9 38.8 17.5 8.7 26.2 QPSK 0.63 single 18.6 9.3 27.9 12.6 6.3 18.9 BPSK 0.63 single 9.3 4.6 13.9 6.3 3.1 9.4 Page 3-79 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 98.8 49.4 148.2 66.3 33.2 99.5 64QAM 0.92 dual 83.2 41.6 124.9 55.9 27.9 83.8 64QAM 0.75 dual 68.0 34.0 102.0 45.7 22.8 68.5 16QAM 0.87 dual 52.9 26.5 79.4 35.5 17.8 53.3 16QAM 0.63 dual 38.0 19.0 57.1 25.5 12.8 38.3 256QAM 0.81 single 49.4 24.7 74.1 33.2 16.6 49.8 64QAM 0.92 single 41.6 20.8 62.4 27.9 14.0 41.9 64QAM 0.75 single 34.0 17.0 51.0 22.8 11.4 34.3 16QAM 0.87 single 26.5 13.2 39.7 17.8 8.9 26.6 16QAM 0.63 single 19.0 9.5 28.5 12.8 6.4 19.2 QPSK 0.87 single 13.2 6.6 19.8 8.9 4.4 13.3 QPSK 0.63 single 9.5 4.8 14.3 6.4 3.2 9.6 BPSK 0.63 single 4.8 2.4 7.1 3.2 1.6 4.8 Table 89 Throughput at zero link range (Mbit/s), Full, symmetry 3:1, optimization IP Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 337.21 112.40 449.62 307.87 102.62 410.49 64QAM 0.92 dual 284.11 94.70 378.81 259.39 86.46 345.85 64QAM 0.75 dual 232.17 77.39 309.56 211.97 70.66 282.63 16QAM 0.87 dual 180.62 60.21 240.83 164.90 54.97 219.87 16QAM 0.63 dual 129.84 43.28 173.12 118.55 39.51 158.06 256QAM 0.81 single 168.60 56.20 224.80 153.93 51.31 205.24 64QAM 0.92 single 142.05 47.35 189.40 129.69 43.23 172.92 64QAM 0.75 single 116.08 38.69 154.78 105.98 35.33 141.31 16QAM 0.87 single 90.31 30.10 120.41 82.45 27.48 109.93 16QAM 0.63 single 64.92 21.64 86.56 59.27 19.76 79.03 QPSK 0.87 single 45.15 15.05 60.20 41.22 13.74 54.96 QPSK 0.63 single 32.46 10.82 43.27 29.63 9.88 39.51 BPSK 0.63 single 16.23 5.41 21.63 14.81 4.94 19.75 Page 3-80 Chapter 3: System planning Data throughput capacity tables Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 225.01 75.00 300.02 148.50 49.50 198.00 64QAM 0.92 dual 189.58 63.19 252.77 125.11 41.70 166.82 64QAM 0.75 dual 154.92 51.64 206.56 102.24 34.08 136.32 16QAM 0.87 dual 120.52 40.17 160.70 79.54 26.51 106.05 16QAM 0.63 dual 86.64 28.88 115.52 57.18 19.06 76.24 256QAM 0.81 single 112.51 37.50 150.01 74.25 24.75 98.99 64QAM 0.92 single 94.79 31.60 126.38 62.56 20.85 83.41 64QAM 0.75 single 77.46 25.82 103.28 51.12 17.04 68.16 16QAM 0.87 single 60.26 20.09 80.34 39.77 13.25 53.02 16QAM 0.63 single 43.32 14.44 57.76 28.59 9.53 38.12 QPSK 0.87 single 30.13 10.04 40.17 19.88 6.63 26.51 QPSK 0.63 single 21.66 7.22 28.88 14.29 4.76 19.05 BPSK 0.63 single 10.83 3.61 14.43 7.14 2.38 9.52 Modulation mode 15 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 112.09 37.36 149.45 75.14 25.04 100.18 64QAM 0.92 dual 94.44 31.48 125.91 63.30 21.10 84.40 64QAM 0.75 dual 77.17 25.72 102.89 51.73 17.24 68.97 16QAM 0.87 dual 60.04 20.01 80.05 40.24 13.41 53.66 16QAM 0.63 dual 43.16 14.38 57.54 28.93 9.64 38.57 256QAM 0.81 single 56.04 18.68 74.72 37.57 12.52 50.09 64QAM 0.92 single 47.22 15.74 62.95 31.65 10.55 42.20 64QAM 0.75 single 38.58 12.86 51.44 25.86 8.62 34.48 16QAM 0.87 single 30.02 10.00 40.02 20.12 6.71 26.83 16QAM 0.63 single 21.58 7.19 28.77 14.46 4.82 19.28 QPSK 0.87 single 15.01 5.00 20.01 10.06 3.35 13.41 QPSK 0.63 single 10.79 3.59 14.38 7.23 2.41 9.64 BPSK 0.63 single 5.39 1.80 7.19 3.61 1.20 4.82 Page 3-81 10 MHz (Tx/Rx/Aggregate) Chapter 3: System planning Data throughput capacity tables Table 90 Throughput at zero link range (Mbit/s), Full, symmetry 5:1, optimization IP Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 374.68 74.93 449.62 335.20 67.04 402.24 64QAM 0.92 dual 315.68 63.13 378.81 282.42 56.48 338.90 64QAM 0.75 dual 257.97 51.59 309.56 230.79 46.16 276.95 16QAM 0.87 dual 200.69 40.14 240.83 179.54 35.91 215.45 16QAM 0.63 dual 144.27 28.85 173.12 129.07 25.81 154.88 256QAM 0.81 single 187.34 37.47 224.80 167.60 33.52 201.12 64QAM 0.92 single 157.84 31.57 189.40 141.21 28.24 169.45 64QAM 0.75 single 128.98 25.79 154.78 115.39 23.08 138.47 16QAM 0.87 single 100.34 20.07 120.41 89.77 17.95 107.72 16QAM 0.63 single 72.13 14.43 86.56 64.53 12.90 77.44 QPSK 0.87 single 50.17 10.03 60.20 44.88 8.98 53.86 QPSK 0.63 single 36.06 7.21 43.27 32.26 6.45 38.71 BPSK 0.63 single 18.03 3.60 21.63 16.13 3.22 19.35 Modulation mode 30 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 248.23 49.64 297.87 64QAM 0.92 dual 209.14 41.83 250.96 64QAM 0.75 dual 170.90 34.18 205.08 16QAM 0.87 dual 132.96 26.59 159.55 16QAM 0.63 dual 95.58 19.11 114.69 256QAM 0.81 single 124.11 24.82 148.93 64QAM 0.92 single 104.57 20.91 125.48 64QAM 0.75 single 85.45 17.09 102.54 16QAM 0.87 single 66.48 13.29 79.77 16QAM 0.63 single 47.79 9.56 57.34 QPSK 0.87 single 33.24 6.65 39.88 QPSK 0.63 single 23.89 4.78 28.67 BPSK 0.63 single 11.94 2.39 14.33 Page 3-82 Chapter 3: System planning Data throughput capacity tables Table 91 Throughput at zero link range (Mbit/s), Full, symmetry adaptive, optimization IP Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 407.9 40.8 448.7 367.9 40.9 408.8 64QAM 0.92 dual 343.7 34.4 378.0 310.0 34.4 344.4 64QAM 0.75 dual 280.8 28.1 308.9 253.3 28.1 281.4 16QAM 0.87 dual 218.5 21.8 240.3 197.1 21.9 218.9 16QAM 0.63 dual 157.1 15.7 172.8 141.7 15.7 157.4 256QAM 0.81 single 204.0 20.4 224.3 183.9 20.4 204.4 64QAM 0.92 single 171.8 17.2 189.0 155.0 17.2 172.2 64QAM 0.75 single 140.4 14.0 154.5 126.6 14.1 140.7 16QAM 0.87 single 109.2 10.9 120.2 98.5 10.9 109.5 16QAM 0.63 single 78.5 7.9 86.4 70.8 7.9 78.7 QPSK 0.87 single 54.6 5.5 60.1 49.3 5.5 54.7 QPSK 0.63 single 39.3 3.9 43.2 35.4 3.9 39.3 BPSK 0.63 single 19.6 2.0 21.6 17.7 2.0 19.7 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 262.5 37.5 300.0 159.4 39.8 199.2 64QAM 0.92 dual 221.2 31.6 252.8 134.3 33.6 167.9 64QAM 0.75 dual 180.7 25.8 206.6 109.7 27.4 137.2 16QAM 0.87 dual 140.6 20.1 160.7 85.4 21.3 106.7 16QAM 0.63 dual 101.1 14.4 115.5 61.4 15.3 76.7 256QAM 0.81 single 131.3 18.7 150.0 79.7 19.9 99.6 64QAM 0.92 single 110.6 15.8 126.4 67.1 16.8 83.9 64QAM 0.75 single 90.4 12.9 103.3 54.9 13.7 68.6 16QAM 0.87 single 70.3 10.0 80.3 42.7 10.7 53.4 16QAM 0.63 single 50.5 7.2 57.8 30.7 7.7 38.4 QPSK 0.87 single 35.2 5.0 40.2 21.3 5.3 26.7 QPSK 0.63 single 25.3 3.6 28.9 15.3 3.8 19.2 BPSK 0.63 single 12.6 1.8 14.4 7.7 1.9 9.6 Page 3-83 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 120.2 30.0 150.2 66.3 33.2 99.5 64QAM 0.92 dual 101.2 25.3 126.6 55.9 27.9 83.8 64QAM 0.75 dual 82.7 20.7 103.4 45.7 22.8 68.5 16QAM 0.87 dual 64.4 16.1 80.5 35.5 17.8 53.3 16QAM 0.63 dual 46.3 11.6 57.8 25.5 12.8 38.3 256QAM 0.81 single 60.1 15.0 75.1 33.2 16.6 49.8 64QAM 0.92 single 50.6 12.7 63.3 27.9 14.0 41.9 64QAM 0.75 single 41.4 10.3 51.7 22.8 11.4 34.3 16QAM 0.87 single 32.2 8.0 40.2 17.8 8.9 26.6 16QAM 0.63 single 23.1 5.8 28.9 12.8 6.4 19.2 QPSK 0.87 single 16.1 4.0 20.1 8.9 4.4 13.3 QPSK 0.63 single 11.6 2.9 14.5 6.4 3.2 9.6 BPSK 0.63 single 5.8 1.4 7.2 3.2 1.6 4.8 Page 3-84 Chapter 3: System planning Data throughput capacity tables Table 92 Throughput at zero link range (Mbit/s), Lite, symmetry 1:1, optimization IP Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 113.0 113.0 226.0 103.0 103.0 206.0 64QAM 0.92 dual 95.0 95.0 190.0 87.0 87.0 174.0 64QAM 0.75 dual 78.0 78.0 156.0 71.0 71.0 142.0 16QAM 0.87 dual 61.0 61.0 122.0 55.0 55.0 110.0 16QAM 0.63 dual 44.0 44.0 88.0 40.0 40.0 80.0 256QAM 0.81 single 57.0 57.0 114.0 52.0 52.0 104.0 64QAM 0.92 single 48.0 48.0 96.0 43.0 43.0 86.0 64QAM 0.75 single 39.0 39.0 78.0 36.0 36.0 72.0 16QAM 0.87 single 30.0 30.0 60.0 28.0 28.0 56.0 16QAM 0.63 single 22.0 22.0 44.0 20.0 20.0 40.0 QPSK 0.87 single 15.0 15.0 30.0 14.0 14.0 28.0 QPSK 0.63 single 11.0 11.0 22.0 10.0 10.0 20.0 BPSK 0.63 single 5.0 5.0 10.0 5.0 5.0 10.0 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 76.0 76.0 152.0 50.0 50.0 100.0 64QAM 0.92 dual 64.0 64.0 128.0 42.0 42.0 84.0 64QAM 0.75 dual 52.0 52.0 104.0 34.0 34.0 68.0 16QAM 0.87 dual 40.0 40.0 80.0 27.0 27.0 54.0 16QAM 0.63 dual 29.0 29.0 58.0 19.0 19.0 38.0 256QAM 0.81 single 38.0 38.0 76.0 25.0 25.0 50.0 64QAM 0.92 single 32.0 32.0 64.0 21.0 21.0 42.0 64QAM 0.75 single 26.0 26.0 52.0 17.0 17.0 34.0 16QAM 0.87 single 20.0 20.0 40.0 13.0 13.0 26.0 16QAM 0.63 single 15.0 15.0 30.0 10.0 10.0 20.0 QPSK 0.87 single 10.0 10.0 20.0 7.0 7.0 14.0 QPSK 0.63 single 7.0 7.0 14.0 5.0 5.0 10.0 BPSK 0.63 single 5.0 5.0 10.0 4.8 4.8 9.6 Page 3-85 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 38.0 38.0 76.0 25.0 25.0 50.0 64QAM 0.92 dual 32.0 32.0 64.0 21.0 21.0 42.0 64QAM 0.75 dual 26.0 26.0 52.0 17.0 17.0 34.0 16QAM 0.87 dual 20.0 20.0 40.0 13.0 13.0 26.0 16QAM 0.63 dual 15.0 15.0 30.0 10.0 10.0 20.0 256QAM 0.81 single 19.0 19.0 38.0 13.0 13.0 26.0 64QAM 0.92 single 16.0 16.0 32.0 11.0 11.0 22.0 64QAM 0.75 single 13.0 13.0 26.0 9.0 9.0 18.0 16QAM 0.87 single 10.0 10.0 20.0 7.0 7.0 14.0 16QAM 0.63 single 7.0 7.0 14.0 5.0 5.0 10.0 QPSK 0.87 single 5.0 5.0 10.0 5.0 5.0 10.0 QPSK 0.63 single 5.0 5.0 10.0 4.8 4.8 9.6 BPSK 0.63 single 3.6 3.6 7.2 2.4 2.4 4.8 Modulation mode 5 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 12.0 12.0 24.0 64QAM 0.92 dual 10.0 10.0 20.0 64QAM 0.75 dual 8.0 8.0 16.0 16QAM 0.87 dual 6.0 6.0 12.0 16QAM 0.63 dual 5.0 5.0 10.0 256QAM 0.81 single 6.0 6.0 12.0 64QAM 0.92 single 5.0 5.0 10.0 64QAM 0.75 single 5.0 5.0 10.0 16QAM 0.87 single 5.0 5.0 10.0 16QAM 0.63 single 4.7 4.7 9.3 QPSK 0.87 single 3.2 3.2 6.5 QPSK 0.63 single 2.3 2.3 4.7 BPSK 0.63 single 1.2 1.2 2.3 Page 3-86 Chapter 3: System planning Data throughput capacity tables Table 93 Throughput at zero link range (Mbit/s), Lite, symmetry 1:1, optimization TDM Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 100.0 100.0 200.0 93.0 93.0 186.0 64QAM 0.92 dual 84.0 84.0 168.0 78.0 78.0 156.0 64QAM 0.75 dual 69.0 69.0 138.0 64.0 64.0 128.0 16QAM 0.87 dual 54.0 54.0 108.0 50.0 50.0 100.0 16QAM 0.63 dual 39.0 39.0 78.0 36.0 36.0 72.0 256QAM 0.81 single 50.0 50.0 100.0 47.0 47.0 94.0 64QAM 0.92 single 42.0 42.0 84.0 39.0 39.0 78.0 64QAM 0.75 single 34.0 34.0 68.0 32.0 32.0 64.0 16QAM 0.87 single 27.0 27.0 54.0 25.0 25.0 50.0 16QAM 0.63 single 19.0 19.0 38.0 18.0 18.0 36.0 QPSK 0.87 single 13.0 13.0 26.0 12.0 12.0 24.0 QPSK 0.63 single 10.0 10.0 20.0 9.0 9.0 18.0 BPSK 0.63 single 5.0 5.0 10.0 5.0 5.0 10.0 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 70.0 70.0 140.0 48.0 48.0 96.0 64QAM 0.92 dual 59.0 59.0 118.0 40.0 40.0 80.0 64QAM 0.75 dual 48.0 48.0 96.0 33.0 33.0 66.0 16QAM 0.87 dual 38.0 38.0 76.0 26.0 26.0 52.0 16QAM 0.63 dual 27.0 27.0 54.0 18.0 18.0 36.0 256QAM 0.81 single 35.0 35.0 70.0 24.0 24.0 48.0 64QAM 0.92 single 30.0 30.0 60.0 20.0 20.0 40.0 64QAM 0.75 single 24.0 24.0 48.0 17.0 17.0 34.0 16QAM 0.87 single 19.0 19.0 38.0 13.0 13.0 26.0 16QAM 0.63 single 14.0 14.0 28.0 9.0 9.0 18.0 QPSK 0.87 single 9.0 9.0 18.0 6.0 6.0 12.0 QPSK 0.63 single 7.0 7.0 14.0 5.0 5.0 10.0 BPSK 0.63 single 5.0 5.0 10.0 4.6 4.6 9.2 Page 3-87 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 36.0 36.0 72.0 25.0 25.0 50.0 64QAM 0.92 dual 31.0 31.0 62.0 21.0 21.0 42.0 64QAM 0.75 dual 25.0 25.0 50.0 17.0 17.0 34.0 16QAM 0.87 dual 20.0 20.0 40.0 13.0 13.0 26.0 16QAM 0.63 dual 14.0 14.0 28.0 9.0 9.0 18.0 256QAM 0.81 single 18.0 18.0 36.0 12.0 12.0 24.0 64QAM 0.92 single 15.0 15.0 30.0 10.0 10.0 20.0 64QAM 0.75 single 13.0 13.0 26.0 8.0 8.0 16.0 16QAM 0.87 single 10.0 10.0 20.0 7.0 7.0 14.0 16QAM 0.63 single 7.0 7.0 14.0 5.0 5.0 10.0 QPSK 0.87 single 5.0 5.0 10.0 5.0 5.0 10.0 QPSK 0.63 single 5.0 5.0 10.0 4.7 4.7 9.5 BPSK 0.63 single 3.5 3.5 7.0 2.4 2.4 4.7 Modulation mode 5 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 12.0 12.0 24.0 64QAM 0.92 dual 10.0 10.0 20.0 64QAM 0.75 dual 8.0 8.0 16.0 16QAM 0.87 dual 6.0 6.0 12.0 16QAM 0.63 dual 5.0 5.0 10.0 256QAM 0.81 single 6.0 6.0 12.0 64QAM 0.92 single 5.0 5.0 10.0 64QAM 0.75 single 5.0 5.0 10.0 16QAM 0.87 single 5.0 5.0 10.0 16QAM 0.63 single 4.7 4.7 9.3 QPSK 0.87 single 3.2 3.2 6.5 QPSK 0.63 single 2.3 2.3 4.7 BPSK 0.63 single 1.2 1.2 2.3 Page 3-88 Chapter 3: System planning Data throughput capacity tables Table 94 Throughput at zero link range (Mbit/s), Lite, symmetry 2:1, optimization IP Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 150.0 75.0 225.0 137.0 68.0 205.0 64QAM 0.92 dual 126.0 63.0 189.0 115.0 58.0 173.0 64QAM 0.75 dual 103.0 52.0 155.0 94.0 47.0 141.0 16QAM 0.87 dual 80.0 40.0 120.0 73.0 37.0 110.0 16QAM 0.63 dual 58.0 29.0 87.0 53.0 26.0 79.0 256QAM 0.81 single 75.0 37.0 112.0 68.0 34.0 102.0 64QAM 0.92 single 63.0 32.0 95.0 58.0 29.0 87.0 64QAM 0.75 single 52.0 26.0 78.0 47.0 24.0 71.0 16QAM 0.87 single 40.0 20.0 60.0 37.0 18.0 55.0 16QAM 0.63 single 29.0 14.0 43.0 26.0 13.0 39.0 QPSK 0.87 single 20.0 10.0 30.0 18.0 9.0 27.0 QPSK 0.63 single 14.0 7.0 21.0 13.0 7.0 20.0 BPSK 0.63 single 7.0 5.0 12.0 7.0 5.0 12.0 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 100.0 50.0 150.0 67.0 33.0 100.0 64QAM 0.92 dual 84.0 42.0 126.0 56.0 28.0 84.0 64QAM 0.75 dual 69.0 35.0 104.0 46.0 23.0 69.0 16QAM 0.87 dual 54.0 27.0 81.0 36.0 18.0 54.0 16QAM 0.63 dual 39.0 19.0 58.0 26.0 13.0 39.0 256QAM 0.81 single 50.0 25.0 75.0 33.0 17.0 50.0 64QAM 0.92 single 42.0 21.0 63.0 28.0 14.0 42.0 64QAM 0.75 single 35.0 17.0 52.0 23.0 11.0 34.0 16QAM 0.87 single 27.0 13.0 40.0 18.0 9.0 27.0 16QAM 0.63 single 19.0 10.0 29.0 13.0 6.0 19.0 QPSK 0.87 single 13.0 7.0 20.0 9.0 5.0 14.0 QPSK 0.63 single 10.0 5.0 15.0 6.0 5.0 11.0 BPSK 0.63 single 5.0 4.8 9.8 5.0 3.2 8.2 Page 3-89 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 50.0 25.0 75.0 33.0 17.0 50.0 64QAM 0.92 dual 42.0 21.0 63.0 28.0 14.0 42.0 64QAM 0.75 dual 35.0 17.0 52.0 23.0 11.0 34.0 16QAM 0.87 dual 27.0 13.0 40.0 18.0 9.0 27.0 16QAM 0.63 dual 19.0 10.0 29.0 13.0 6.0 19.0 256QAM 0.81 single 25.0 13.0 38.0 17.0 8.0 25.0 64QAM 0.92 single 21.0 11.0 32.0 14.0 7.0 21.0 64QAM 0.75 single 17.0 9.0 26.0 11.0 6.0 17.0 16QAM 0.87 single 13.0 7.0 20.0 9.0 5.0 14.0 16QAM 0.63 single 10.0 5.0 15.0 6.0 5.0 11.0 QPSK 0.87 single 7.0 5.0 12.0 5.0 4.4 9.4 QPSK 0.63 single 5.0 4.8 9.8 5.0 3.2 8.2 BPSK 0.63 single 4.8 2.4 7.2 3.2 1.6 4.8 Page 3-90 Chapter 3: System planning Data throughput capacity tables Table 95 Throughput at zero link range (Mbit/s), Lite, symmetry 2:1, optimization TDM Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 139.0 70.0 209.0 129.0 64.0 193.0 64QAM 0.92 dual 117.0 59.0 176.0 109.0 54.0 163.0 64QAM 0.75 dual 96.0 48.0 144.0 89.0 44.0 133.0 16QAM 0.87 dual 75.0 37.0 112.0 69.0 35.0 104.0 16QAM 0.63 dual 54.0 27.0 81.0 50.0 25.0 75.0 256QAM 0.81 single 70.0 35.0 105.0 64.0 32.0 96.0 64QAM 0.92 single 59.0 29.0 88.0 54.0 27.0 81.0 64QAM 0.75 single 48.0 24.0 72.0 44.0 22.0 66.0 16QAM 0.87 single 37.0 19.0 56.0 35.0 17.0 52.0 16QAM 0.63 single 27.0 13.0 40.0 25.0 12.0 37.0 QPSK 0.87 single 19.0 9.0 28.0 17.0 9.0 26.0 QPSK 0.63 single 13.0 7.0 20.0 12.0 6.0 18.0 BPSK 0.63 single 7.0 5.0 12.0 6.0 5.0 11.0 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 97.0 48.0 145.0 65.0 33.0 98.0 64QAM 0.92 dual 81.0 41.0 122.0 55.0 28.0 83.0 64QAM 0.75 dual 66.0 33.0 99.0 45.0 22.0 67.0 16QAM 0.87 dual 52.0 26.0 78.0 35.0 17.0 52.0 16QAM 0.63 dual 37.0 19.0 56.0 25.0 13.0 38.0 256QAM 0.81 single 48.0 24.0 72.0 33.0 16.0 49.0 64QAM 0.92 single 41.0 20.0 61.0 28.0 14.0 42.0 64QAM 0.75 single 33.0 17.0 50.0 22.0 11.0 33.0 16QAM 0.87 single 26.0 13.0 39.0 17.0 9.0 26.0 16QAM 0.63 single 19.0 9.0 28.0 13.0 6.0 19.0 QPSK 0.87 single 13.0 6.0 19.0 9.0 5.0 14.0 QPSK 0.63 single 9.0 5.0 14.0 6.0 5.0 11.0 BPSK 0.63 single 5.0 4.6 9.6 5.0 3.1 8.1 Page 3-91 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 49.0 25.0 74.0 33.0 17.0 50.0 64QAM 0.92 dual 42.0 21.0 63.0 28.0 14.0 42.0 64QAM 0.75 dual 34.0 17.0 51.0 23.0 11.0 34.0 16QAM 0.87 dual 26.0 13.0 39.0 18.0 9.0 27.0 16QAM 0.63 dual 19.0 10.0 29.0 13.0 6.0 19.0 256QAM 0.81 single 25.0 12.0 37.0 17.0 8.0 25.0 64QAM 0.92 single 21.0 10.0 31.0 14.0 7.0 21.0 64QAM 0.75 single 17.0 9.0 26.0 11.0 6.0 17.0 16QAM 0.87 single 13.0 7.0 20.0 9.0 5.0 14.0 16QAM 0.63 single 10.0 5.0 15.0 6.0 5.0 11.0 QPSK 0.87 single 7.0 5.0 12.0 5.0 4.4 9.4 QPSK 0.63 single 5.0 4.8 9.8 5.0 3.2 8.2 BPSK 0.63 single 4.8 2.4 7.1 3.2 1.6 4.8 Page 3-92 Chapter 3: System planning Data throughput capacity tables Table 96 Throughput at zero link range (Mbit/s), Lite, symmetry 3:1, optimization IP Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 169.0 56.0 225.0 154.0 51.0 205.0 64QAM 0.92 dual 142.0 47.0 189.0 130.0 43.0 173.0 64QAM 0.75 dual 116.0 39.0 155.0 106.0 35.0 141.0 16QAM 0.87 dual 90.0 30.0 120.0 82.0 27.0 109.0 16QAM 0.63 dual 65.0 22.0 87.0 59.0 20.0 79.0 256QAM 0.81 single 84.0 28.0 112.0 77.0 26.0 103.0 64QAM 0.92 single 71.0 24.0 95.0 65.0 22.0 87.0 64QAM 0.75 single 58.0 19.0 77.0 53.0 18.0 71.0 16QAM 0.87 single 45.0 15.0 60.0 41.0 14.0 55.0 16QAM 0.63 single 32.0 11.0 43.0 30.0 10.0 40.0 QPSK 0.87 single 23.0 8.0 31.0 21.0 7.0 28.0 QPSK 0.63 single 16.0 5.0 21.0 15.0 5.0 20.0 BPSK 0.63 single 8.0 5.0 13.0 7.0 4.9 11.9 Modulation mode 30 MHz (Tx/Rx/Aggregate) 20 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 113.0 38.0 151.0 74.0 25.0 99.0 64QAM 0.92 dual 95.0 32.0 127.0 63.0 21.0 84.0 64QAM 0.75 dual 77.0 26.0 103.0 51.0 17.0 68.0 16QAM 0.87 dual 60.0 20.0 80.0 40.0 13.0 53.0 16QAM 0.63 dual 43.0 14.0 57.0 29.0 10.0 39.0 256QAM 0.81 single 56.0 19.0 75.0 37.0 12.0 49.0 64QAM 0.92 single 47.0 16.0 63.0 31.0 10.0 41.0 64QAM 0.75 single 39.0 13.0 52.0 26.0 9.0 35.0 16QAM 0.87 single 30.0 10.0 40.0 20.0 7.0 27.0 16QAM 0.63 single 22.0 7.0 29.0 14.0 5.0 19.0 QPSK 0.87 single 15.0 5.0 20.0 10.0 5.0 15.0 QPSK 0.63 single 11.0 5.0 16.0 7.0 4.8 11.8 BPSK 0.63 single 5.0 3.6 8.6 5.0 2.4 7.4 Page 3-93 Chapter 3: System planning Modulation mode Data throughput capacity tables 15 MHz (Tx/Rx/Aggregate) 10 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 56.0 19.0 75.0 38.0 13.0 51.0 64QAM 0.92 dual 47.0 16.0 63.0 32.0 11.0 43.0 64QAM 0.75 dual 39.0 13.0 52.0 26.0 9.0 35.0 16QAM 0.87 dual 30.0 10.0 40.0 20.0 7.0 27.0 16QAM 0.63 dual 22.0 7.0 29.0 14.0 5.0 19.0 256QAM 0.81 single 28.0 9.0 37.0 19.0 6.0 25.0 64QAM 0.92 single 24.0 8.0 32.0 16.0 5.0 21.0 64QAM 0.75 single 19.0 6.0 25.0 13.0 5.0 18.0 16QAM 0.87 single 15.0 5.0 20.0 10.0 5.0 15.0 16QAM 0.63 single 11.0 5.0 16.0 7.0 4.8 11.8 QPSK 0.87 single 8.0 5.0 13.0 5.0 3.4 8.4 QPSK 0.63 single 5.0 3.6 8.6 5.0 2.4 7.4 BPSK 0.63 single 5.0 1.8 6.8 3.6 1.2 4.8 Page 3-94 Chapter 3: System planning Data throughput capacity tables Table 97 Throughput at zero link range (Mbit/s), Lite, symmetry 5:1, optimization IP Modulation mode 45 MHz (Tx/Rx/Aggregate) 40 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 187.0 37.0 224.0 168.0 34.0 202.0 64QAM 0.92 dual 158.0 32.0 190.0 141.0 28.0 169.0 64QAM 0.75 dual 129.0 26.0 155.0 115.0 23.0 138.0 16QAM 0.87 dual 100.0 20.0 120.0 90.0 18.0 108.0 16QAM 0.63 dual 72.0 14.0 86.0 65.0 13.0 78.0 256QAM 0.81 single 94.0 19.0 113.0 84.0 17.0 101.0 64QAM 0.92 single 79.0 16.0 95.0 71.0 14.0 85.0 64QAM 0.75 single 64.0 13.0 77.0 58.0 12.0 70.0 16QAM 0.87 single 50.0 10.0 60.0 45.0 9.0 54.0 16QAM 0.63 single 36.0 7.0 43.0 32.0 6.0 38.0 QPSK 0.87 single 25.0 5.0 30.0 22.0 5.0 27.0 QPSK 0.63 single 18.0 5.0 23.0 16.0 5.0 21.0 BPSK 0.63 single 9.0 3.6 12.6 8.0 3.2 11.2 Modulation mode 30 MHz (Tx/Rx/Aggregate) 256QAM 0.81 dual 124.0 25.0 149.0 64QAM 0.92 dual 105.0 21.0 126.0 64QAM 0.75 dual 85.0 17.0 102.0 16QAM 0.87 dual 66.0 13.0 79.0 16QAM 0.63 dual 48.0 10.0 58.0 256QAM 0.81 single 62.0 12.0 74.0 64QAM 0.92 single 52.0 10.0 62.0 64QAM 0.75 single 43.0 9.0 52.0 16QAM 0.87 single 33.0 7.0 40.0 16QAM 0.63 single 24.0 5.0 29.0 QPSK 0.87 single 17.0 5.0 22.0 QPSK 0.63 single 12.0 4.8 16.8 BPSK 0.63 single 6.0 2.4 8.4 Page 3-95 Chapter 3: System planning Data throughput capacity tables Figure 65 Range adjustment for PTP 700, symmetry 1:1, optimization IP, bandwidth 45 MHz 1.00 0.98 Range factor 0.96 0.94 0.92 0.90 0.88 0.86 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 66 Range adjustment for PTP 700, symmetry 1:1, optimization IP, bandwidth 40 MHz 1.00 0.98 0.96 Range factor 0.94 0.92 0.90 0.88 0.86 0.84 20 40 60 80 100 Range (km) Page 3-96 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 67 Range adjustment for PTP 700, symmetry 1:1, optimization IP, bandwidth 30 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 0.75 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 68 Range adjustment for PTP 700, symmetry 1:1, optimization IP, bandwidth 20 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) Page 3-97 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 69 Range adjustment for PTP 700, symmetry 1:1, optimization IP, bandwidth 15 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 0.75 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 70 Range adjustment for PTP 700, symmetry 1:1, optimization IP, bandwidth 10 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 0.75 20 40 60 80 100 Range (km) Page 3-98 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 71 Range adjustment for PTP 700, symmetry 1:1, optimization IP, bandwidth 5 MHz 1.00 Range factor 0.90 0.80 0.70 0.60 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 72 Range adjustment for PTP 700, symmetry 1:1, optimization TDM, bandwidth 45 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) Page 3-99 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 73 Range adjustment for PTP 700, symmetry 1:1, optimization TDM, bandwidth 40 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 74 Range adjustment for PTP 700, symmetry 1:1, optimization TDM, bandwidth 30 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) Page 3-100 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 75 Range adjustment for PTP 700, symmetry 1:1, optimization TDM, bandwidth 20 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 76 Range adjustment for PTP 700, symmetry 1:1, optimization TDM, bandwidth 15 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 0.75 20 40 60 80 100 Range (km) Page 3-101 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 77 Range adjustment for PTP 700, symmetry 1:1, optimization TDM, bandwidth 10 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 0.75 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 78 Range adjustment for PTP 700, symmetry 1:1, optimization TDM, bandwidth 5 MHz 1.00 Range factor 0.90 0.80 0.70 0.60 20 40 60 80 100 Range (km) Page 3-102 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 79 Range adjustment for PTP 700, symmetry 2:1, optimization IP, bandwidth 45 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 80 Range adjustment for PTP 700, symmetry 2:1, optimization IP, bandwidth 40 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 20 40 60 80 100 Range (km) Page 3-103 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 81 Range adjustment for PTP 700, symmetry 2:1, optimization IP, bandwidth 30 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 82 Range adjustment for PTP 700, symmetry 2:1, optimization IP, bandwidth 20 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) Page 3-104 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 83 Range adjustment for PTP 700, symmetry 2:1, optimization IP, bandwidth 15 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 0.75 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 84 Range adjustment for PTP 700, symmetry 2:1, optimization IP, bandwidth 10 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) Page 3-105 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 85 Range adjustment for PTP 700, symmetry 2:1, optimization TDM, bandwidth 45 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 0.65 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 86 Range adjustment for PTP 700, symmetry 2:1, optimization TDM, bandwidth 40 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 0.65 20 40 60 80 100 Range (km) Page 3-106 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 87 Range adjustment for PTP 700, symmetry 2:1, optimization TDM, bandwidth 30 MHz 1.00 Range factor 0.90 0.80 0.70 0.60 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 88 Range adjustment for PTP 700, symmetry 2:1, optimization TDM, bandwidth 20 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) Page 3-107 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 89 Range adjustment for PTP 700, symmetry 2:1, optimization TDM, bandwidth 15 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 0.75 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 90 Range adjustment for PTP 700, symmetry 2:1, optimization TDM, bandwidth 10 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) Page 3-108 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 91 Range adjustment for PTP 700, symmetry 3:1, optimization IP, bandwidth 45 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 0.65 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 92 Range adjustment for PTP 700, symmetry 3:1, optimization IP, bandwidth 40 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) Page 3-109 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 93 Range adjustment for PTP 700, symmetry 3:1, optimization IP, bandwidth 30 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 0.65 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 94 Range adjustment for PTP 700, symmetry 3:1, optimization IP, bandwidth 20 MHz 1.00 0.95 0.90 Range factor 0.85 0.80 0.75 0.70 0.65 0.60 20 40 60 80 100 Range (km) Page 3-110 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 95 Range adjustment for PTP 700, symmetry 3:1, optimization IP, bandwidth 15 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 0.65 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 96 Range adjustment for PTP 700, symmetry 3:1, optimization IP, bandwidth 10 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 0.75 20 40 60 80 100 Range (km) Page 3-111 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 97 Range adjustment for PTP 700, symmetry 5:1, optimization IP, bandwidth 45 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 0.65 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 98 Range adjustment for PTP 700, symmetry 5:1, optimization IP, bandwidth 40 MHz 1.00 0.95 0.90 Range factor 0.85 0.80 0.75 0.70 0.65 0.60 0.55 20 40 60 80 100 Range (km) Page 3-112 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 99 Range adjustment for PTP 700, symmetry 5:1, optimization IP, bandwidth 30 MHz 1.00 0.95 0.90 Range factor 0.85 0.80 0.75 0.70 0.65 0.60 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 100 Range adjustment for PTP 700, adaptive, optimization IP, bandwidth 45 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 20 40 60 80 100 Range (km) Page 3-113 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 101 Range adjustment for PTP 700, adaptive, optimization IP, bandwidth 40 MHz 1.00 Range factor 0.95 0.90 0.85 0.80 0.75 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 102 Range adjustment for PTP 700, adaptive, optimization IP, bandwidth 30 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 0.65 20 40 60 80 100 Range (km) Page 3-114 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 103 Range adjustment for PTP 700, adaptive, optimization IP, bandwidth 20 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 0.65 20 40 60 80 100 Range (km) 120 140 160 180 200 Figure 104 Range adjustment for PTP 700, adaptive, optimization IP, bandwidth 15 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) Page 3-115 120 140 160 180 200 Chapter 3: System planning Data throughput capacity tables Figure 105 Range adjustment for PTP 700, adaptive, optimization IP, bandwidth 10 MHz 1.00 0.95 Range factor 0.90 0.85 0.80 0.75 0.70 20 40 60 80 100 Range (km) 120 140 160 180 200 TDM traffic load Encapsulated data The NIDU supports separate management and TDM data protocol interfaces. The management interface is between the NIDU and a directly-connected ODU. The TDM data interface is between peer NIDUs. The ODU does not interact with the TDM data protocol, except in as much as it provides a separate high priority queue for encapsulated TDM data at the wireless interface. The resulting traffic load for encapsulated TDM data is shown in Table 98. Table 98 TDM traffic load Channels Octets per Ethernet frame E1 data rate (Mbit/s) T1 data rate (Mbit/s) 90 2.940 2.217 157 5.145 3.879 224 7.414 5.590 291 9.619 7.252 358 11.824 8.915 425 14.030 10.577 Page 3-116 Chapter 3: System planning Data throughput capacity tables Channels Octets per Ethernet frame E1 data rate (Mbit/s) T1 data rate (Mbit/s) 492 16.235 12.239 559 18.440 13.902 In the best case (eight channels) the encapsulation has an efficiency of 91.6%. Timing only The resulting TDM traffic load in timing-only operation is shown in Table 99. Table 99 TDM traffic load in timing-only Channels Octets per Ethernet frame E1 data rate (Mbit/s) T1 data rate (Mbit/s) 64 0.512 0.386 64 0.512 0.386 64 0.512 0.386 64 0.512 0.386 64 0.512 0.386 64 0.512 0.386 65 0.520 0.392 71 0.568 0.428 Page 3-117 Chapter 4: Legal and regulatory information This chapter provides end user license agreements and regulatory notifications. Caution Intentional or unintentional changes or modifications to the equipment must not be made unless under the express consent of the party responsible for compliance. Any such modifications could void the userâs authority to operate the equipment and will void the manufacturerâs warranty. Attention Changements ou modifications Intentionnels ou non de l'ĂŠquipement ne doivent pas ĂŞtre entrepris sans l'autorisation de lâorganisme responsable de la dĂŠclaration de conformitĂŠ. Ces modifications ou changements pourraient invalider le droit de l'utilisateur Ă utiliser cet appareil et annuleraient la garantie du fabricant. The following topics are described in this chapter: ⢠Cambium Networks end user license agreement on page 4-2 contains the Cambium and third party license agreements for the PTP 700 Series products. ⢠Compliance with safety standards on page 4-22 lists the safety specifications against which the PTP 700 has been tested and certified. It also describes how to keep RF exposure within safe limits. ⢠Compliance with radio regulations on page 4-28 describes how the PTP 700 complies with the radio regulations that are in force in various countries, and contains notifications made to regulatory bodies for the PTP 700. Page 4-1 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Cambium Networks end user license agreement Definitions In this Agreement, the word âSoftwareâ refers to the set of instructions for computers, in executable form and in any media, (which may include diskette, CD-ROM, downloadable internet, hardware, or firmware) licensed to you. The word âDocumentationâ refers to electronic or printed manuals and accompanying instructional aids licensed to you. The word âProductâ refers to Cambium Networksâ fixed wireless broadband devices for which the Software and Documentation is licensed for use. Acceptance of this agreement In connection with Cambium Networksâ delivery of certain proprietary software or products containing embedded or pre-loaded proprietary software, or both, Cambium Networks is willing to license this certain proprietary software and the accompanying documentation to you only on the condition that you accept all the terms in this End User License Agreement (âAgreementâ). IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, DO NOT USE THE PRODUCT OR INSTALL THE SOFTWARE. INSTEAD, YOU MAY, FOR A FULL REFUND, RETURN THIS PRODUCT TO THE LOCATION WHERE YOU ACQUIRED IT OR PROVIDE WRITTEN VERIFICATION OF DELETION OF ALL COPIES OF THE SOFTWARE. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE PRODUCT, WILL CONSTITUTE YOUR ACCEPTANCE TO THE TERMS OF THIS AGREEMENT. Grant of license Cambium Networks Limited (âCambiumâ) grants you (âLicenseeâ or âyouâ) a personal, nonexclusive, non-transferable license to use the Software and Documentation subject to the Conditions of Use set forth in âConditions of useâ and the terms and conditions of this Agreement. Any terms or conditions relating to the Software and Documentation appearing on the face or reverse side of any purchase order, purchase order acknowledgment or other order document that are different from, or in addition to, the terms of this Agreement will not be binding on the parties, even if payment is accepted. Page 4-2 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Conditions of use Any use of the Software and Documentation outside of the conditions set forth in this Agreement is strictly prohibited and will be deemed a breach of this Agreement. 1. Only you, your employees or agents may use the Software and Documentation. You will take all necessary steps to insure that your employees and agents abide by the terms of this Agreement. 2. You will use the Software and Documentation (i) only for your internal business purposes; (ii) only as described in the Software and Documentation; and (iii) in strict accordance with this Agreement. 3. You may use the Software and Documentation, provided that the use is in conformance with the terms set forth in this Agreement. 4. Portions of the Software and Documentation are protected by United States copyright laws, international treaty provisions, and other applicable laws. Therefore, you must treat the Software like any other copyrighted material (for example, a book or musical recording) except that you may either: (i) make 1 copy of the transportable part of the Software (which typically is supplied on diskette, CD-ROM, or downloadable internet), solely for back-up purposes; or (ii) copy the transportable part of the Software to a PC hard disk, provided you keep the original solely for backup purposes. If the Documentation is in printed form, it may not be copied. If the Documentation is in electronic form, you may print out 1 copy, which then may not be copied. With regard to the copy made for backup or archival purposes, you agree to reproduce any Cambium Networks copyright notice, and other proprietary legends appearing thereon. Such copyright notice(s) may appear in any of several forms, including machine-readable form, and you agree to reproduce such notice in each form in which it appears, to the extent it is physically possible to do so. Unauthorized duplication of the Software or Documentation constitutes copyright infringement, and in the United States is punishable in federal court by fine and imprisonment. 5. You will not transfer, directly or indirectly, any product, technical data or software to any country for which the United States Government requires an export license or other governmental approval without first obtaining such license or approval. Page 4-3 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Title and restrictions If you transfer possession of any copy of the Software and Documentation to another party outside of the terms of this agreement, your license is automatically terminated. Title and copyrights to the Software and Documentation and any copies made by you remain with Cambium Networks and its licensors. You will not, and will not permit others to: (i) modify, translate, decompile, bootleg, reverse engineer, disassemble, or extract the inner workings of the Software or Documentation, (ii) copy the look-and-feel or functionality of the Software or Documentation; (iii) remove any proprietary notices, marks, labels, or logos from the Software or Documentation; (iv) rent or transfer all or some of the Software or Documentation to any other party without Cambiumâs prior written consent; or (v) utilize any computer software or hardware which is designed to defeat any copy protection device, should the Software and Documentation be equipped with such a protection device. If the Software and Documentation is provided on multiple types of media (such as diskette, CD-ROM, downloadable internet), then you will only use the medium which best meets your specific needs, and will not loan, rent, lease, or transfer the other media contained in the package without Cambiumâs written consent. Unauthorized copying of the Software or Documentation, or failure to comply with any of the provisions of this Agreement, will result in automatic termination of this license. Confidentiality You acknowledge that all Software and Documentation contain valuable proprietary information and trade secrets and that unauthorized or improper use of the Software and Documentation will result in irreparable harm to Cambium Networks for which monetary damages would be inadequate and for which Cambium Networks will be entitled to immediate injunctive relief. If applicable, you will limit access to the Software and Documentation to those of your employees and agents who need to use the Software and Documentation for your internal business purposes, and you will take appropriate action with those employees and agents to preserve the confidentiality of the Software and Documentation, using the same degree of care to avoid unauthorized or improper disclosure as you use for the protection of your own proprietary software, but in no event less than reasonable care. You have no obligation to preserve the confidentiality of any proprietary information that: (i) was in the public domain at the time of disclosure; (ii) entered the public domain through no fault of yours; (iii) was given to you free of any obligation to keep it confidential; (iv) is independently developed by you; or (v) is disclosed as required by law provided that you notify Cambium Networks prior to such disclosure and provide Cambium Networks with a reasonable opportunity to respond. Page 4-4 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Right to use Cambiumâs name Except as required in âConditions of useâ, you will not, during the term of this Agreement or thereafter, use any trademark of Cambium Networks, or any word or symbol likely to be confused with any Cambium Networks trademark, either alone or in any combination with another word or words. Transfer The Software and Documentation may not be transferred to another party without the express written consent of Cambium Networks, regardless of whether or not such transfer is accomplished by physical or electronic means. Cambiumâs consent may be withheld at its discretion and may be conditioned upon transferee paying all applicable license fees and agreeing to be bound by this Agreement. Updates During the first 12 months after purchase of a Product, or during the term of any executed Maintenance and Support Agreement for the Product, you are entitled to receive Updates. An âUpdateâ means any code in any form which is a bug fix, patch, error correction, or minor enhancement, but excludes any major feature added to the Software. Updates are available for download at the support website. Major features may be available from time to time for an additional license fee. If Cambium Networks makes available to you major features and no other end user license agreement is provided, then the terms of this Agreement will apply. Maintenance Except as provided above, Cambium Networks is not responsible for maintenance or field service of the Software under this Agreement. Page 4-5 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Disclaimer CAMBIUM NETWORKS DISCLAIMS ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR IN ANY COMMUNICATION WITH YOU. CAMBIUM NETWORKS SPECIFICALLY DISCLAIMS ANY WARRANTY INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE AND DOCUMENTATION ARE PROVIDED âAS IS.â CAMBIUM NETWORKS DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. CAMBIUM NETWORKS MAKES NO WARRANTY WITH RESPECT TO THE CORRECTNESS, ACCURACY, OR RELIABILITY OF THE SOFTWARE AND DOCUMENTATION. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you. Limitation of liability IN NO EVENT SHALL CAMBIUM NETWORKS BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGE ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS, OR FROM ANY BREACH OF WARRANTY, EVEN IF CAMBIUM NETWORKS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. (Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.) IN NO CASE SHALL CAMBIUMâS LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT. U.S. government If you are acquiring the Product on behalf of any unit or agency of the U.S. Government, the following applies. Use, duplication, or disclosure of the Software and Documentation is subject to the restrictions set forth in subparagraphs (c) (1) and (2) of the Commercial Computer Software â Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if applicable, unless being provided to the Department of Defense. If being provided to the Department of Defense, use, duplication, or disclosure of the Products is subject to the restricted rights set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 (OCT 1988), if applicable. Software and Documentation may or may not include a Restricted Rights notice, or other notice referring specifically to the terms and conditions of this Agreement. The terms and conditions of this Agreement will each continue to apply, but only to the extent that such terms and conditions are not inconsistent with the rights provided to you under the aforementioned provisions of the FAR and DFARS, as applicable to the particular procuring agency and procurement transaction. Page 4-6 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Term of license Your right to use the Software will continue in perpetuity unless terminated as follows. Your right to use the Software will terminate immediately without notice upon a breach of this Agreement by you. Within 30 days after termination of this Agreement, you will certify to Cambium Networks in writing that through your best efforts, and to the best of your knowledge, the original and all copies, in whole or in part, in any form, of the Software and all related material and Documentation, have been destroyed, except that, with prior written consent from Cambium Networks, you may retain one copy for archival or backup purposes. You may not sublicense, assign or transfer the license or the Product, except as expressly provided in this Agreement. Any attempt to otherwise sublicense, assign or transfer any of the rights, duties or obligations hereunder is null and void. Governing law This Agreement is governed by the laws of the United States of America to the extent that they apply and otherwise by the laws of the State of Illinois. Assignment This agreement may not be assigned by you without Cambiumâs prior written consent. Survival of provisions The parties agree that where the context of any provision indicates an intent that it survives the term of this Agreement, then it will survive. Entire agreement This agreement contains the partiesâ entire agreement regarding your use of the Software and may be amended only in writing signed by both parties, except that Cambium Networks may modify this Agreement as necessary to comply with applicable laws. Third party software The software may contain one or more items of Third-Party Software supplied by other third-party suppliers. The terms of this Agreement govern your use of any Third-Party Software UNLESS A SEPARATE THIRD-PARTY SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARATE THIRD-PARTY LICENSE. Page 4-7 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Trademarks Javaď Technology and/or J2MEď : Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. UNIXď : UNIX is a registered trademark of The Open Group in the United States and other countries. Net SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts. ---- Part 1: CMU/UCD copyright notice: (BSD like) ----Copyright 1989, 1991, 1992 by Carnegie Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California All Rights Reserved Permission to use, copy, modify and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of CMU and The Regents of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific written permission. CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) ----Copyright Š 2001-2003, Networks Associates Technology, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ⢠Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. ⢠Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. ⢠Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. Page 4-8 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS âAS ISâ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) ----Portions of this code are copyright Š 2001-2003, Cambridge Broadband Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ⢠Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. ⢠Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. ⢠The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER âAS ISâ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) ----Copyright Š 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Page 4-9 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement ⢠Redistributions of source code must retain the above copyright notice, and the following disclaimer. ⢠Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. ⢠Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. this list of conditions THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS âAS ISâ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 5: Sparta, Inc copyright notice (BSD) ----Copyright Š 2003-2008, Sparta, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ⢠Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. ⢠Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. ⢠Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS âAS ISâ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----Copyright Š 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. Page 4-10 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ⢠Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. ⢠Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. ⢠Neither the name of Cisco, Inc, Beijing University of Posts and Telecommunications, nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS âAS ISâ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 7: Fabasoft R&D Software GmbH & Co KG copyright notice (BSD) ----Copyright Š Fabasoft R&D Software GmbH & Co KG, 2003 oss@fabasoft.com Author: Bernhard Penz Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ⢠Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. ⢠Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. ⢠The name of Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries, brand or product names may not be used to endorse or promote products derived from this software without specific prior written permission. Page 4-11 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER âAS ISâ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. OpenSSL Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: âThis product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)â 4. The names âOpenSSL Toolkitâ and âOpenSSL Projectâ must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. 5. Products derived from this software may not be called âOpenSSLâ nor may âOpenSSLâ appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment: âThis product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)â THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT âAS ISâ AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Page 4-12 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright Š 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: âThis product includes cryptographic software written by Eric Young (eay@cryptsoft.com)â The word âcryptographicâ can be left out if the routines from the library being used are not cryptographic related. 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: âThis product includes software written by Tim Hudson (tjh@cryptsoft.com)â THIS SOFTWARE IS PROVIDED BY ERIC YOUNG âAS ISâ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Page 4-13 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement The license and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution license [including the GNU Public License.] Zlib Copyright Š 1995-2005 Jean-loup Gailly and Mark Adler This software is provided âas-isâ, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly jloup@gzip.org Mark Adler madler@alumni.caltech.edu Libpng libpng versions 1.2.6, August 15, 2004, through 1.2.35, February 14, 2009, are Copyright Š 2004, 2006-2008 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright Š 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors Simon-Pierre Cadieux Eric S. Raymond Gilles Vollant and with the following additions to the disclaimer: There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfil any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user. libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright Š 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Page 4-14 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Willem van Schaik libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright Š 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright Š 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, âContributing Authorsâ is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied âAS ISâ. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage. Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions: 1. The origin of this source code must not be misrepresented. 2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source. 3. This Copyright notice may not be removed or altered from any source or altered source distribution. The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated. A âpng_get_copyrightâ function is available, for convenient use in âaboutâ boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). Page 4-15 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.net February 14, 2009 Bzip2 This program, "bzip2", the associated library "libbzip2", and all documentation, are copyright (C) 1996-2007 Julian R Seward. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 3. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 4. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR âAS ISâ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Julian Seward, jseward@bzip.org USB library functions Atmel Corporation 2325 Orchard Parkway San Jose, Ca 95131 Copyright (c) 2004 Atmel Page 4-16 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement Apache Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" Page 4-17 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and (b) You must cause any modified files to carry prominent notices stating that You changed the files; and (c) You must retain, in the Source form that You distribute, all copyright, attribution notices from the Source excluding those notices that do not the Derivative Works; and of any Derivative Works patent, trademark, and form of the Work, pertain to any part of (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one Page 4-18 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, Page 4-19 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives. Copyright [yyyy] [name of copyright owner] Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. Page 4-20 Chapter 4: Legal and regulatory information Cambium Networks end user license agreement D3 JS library Copyright (c) 2013, Michael Bostock All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name Michael Bostock may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MICHAEL BOSTOCK BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Page 4-21 Chapter 4: Legal and regulatory information Compliance with safety standards Compliance with safety standards This section lists the safety specifications against which the PTP 700 has been tested and certified. It also describes how to keep RF exposure within safe limits. Electrical safety compliance The PTP 700 hardware has been tested for compliance to the electrical safety specifications listed in Table 100. Table 100 PTP 700 safety compliance specifications Region Standard USA UL 60950-1, 2nd Edition; UL60950-22 Canada CAN/CSA C22.2 No.60950-1-07, 2nd Edition; CAN/CSA C22.2 No.60950-22-07 EU EN 60950-1:2006 + Amendment 12:2011, EN 60950-22 International CB certified to IEC 60950-1: 2005 (modified); IEC 60950-22: 2005 (modified) Electromagnetic compatibility (EMC) compliance The PTP 700 complies with European EMC Specification EN301 489-1 with testing carried out to the detailed requirements of EN301 489-4. Note For EN 61000-4-2: 1995 to 2009 Electro Static Discharge (ESD), Class 2, 8 kV air, 4 kV contact discharge, the PTP 700 has been tested to ensure immunity to 15 kV air and 8 kV contact. Table 101 lists the EMC specification type approvals that have been granted for PTP 700 products. Table 101 EMC emissions compliance Region Specification (Type Approvals) Europe ETSI EN301 489-4 Page 4-22 Chapter 4: Legal and regulatory information Compliance with safety standards Human exposure to radio frequency energy Relevant standards (USA and EC) applicable when working with RF equipment are: ⢠ANSI IEEE C95.1-1991, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. ⢠Council recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) (1999/519/EC) and respective national regulations. ⢠Directive 2004/40/EC of the European Parliament and of the Council of 29 April 2004 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields) (18th individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC). ⢠US FCC limits for the general population. See the FCC web site at http://www.fcc.gov, and the policies, guidelines, and requirements in Part 1 of Title 47 of the Code of Federal Regulations. ⢠Health Canada limits for the general population. See the Health Canada web site at http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/99ehd-dhm237/limits-limites_e.html and Safety Code 6. ⢠EN 50383:2002 to 2010 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz). ⢠BS EN 50385:2002 Product standard to demonstrate the compliances of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz â 40 GHz) â general public. ⢠ICNIRP (International Commission on Non-Ionizing Radiation Protection) guidelines for the general public. See the ICNIRP web site at http://www.icnirp.de/ and Guidelines for Limiting Exposure to Time-Varying Electric, Magnetic, and Electromagnetic Fields. Power density exposure limit Install the radios for the PTP 700 family of PTP wireless solutions so as to provide and maintain the minimum separation distances from all persons. The applicable power density exposure limit for RF energy between 4400 MHz and 5875 MHz is 10 W/m2. Page 4-23 Chapter 4: Legal and regulatory information Compliance with safety standards Calculation of power density The following calculation is based on the ANSI IEEE C95.1-1991 method, as that provides a worst case analysis. Details of the assessment to EN50383:2002 can be provided, if required. Peak power density in the far field of a radio frequency point source is calculated as follows: đđ = Where: đđđđ 4đđđđ 2 ⢠S is the power density in W/m2 ⢠P is the average transmit power capability of the radio in W, equal to the configured maximum transmitter power as a linear number, multiplied by 0.8 to account for the worst case transmit/receive ratio ⢠G is the effective antenna gain, including cable losses, expressed as a linear number (not in dBi) ⢠d is the distance from the antenna Rearranging terms to solve for distance yields: đđ = ďż˝ đđđđ 4đđđđ Calculated distances Table 102 shows calculated minimum separation distances each frequency band and for the highest gain antenna of each type, assuming that the equipment is operating at the maximum transmit power for PTP 700. At these and greater separation distances, the power density from the RF field is below generally accepted limits for the general population. Calcul des distances pour la conformitĂŠ aux limites de radiation radiofrĂŠquence La Table 102 indique les distances minimales de sĂŠparation calculĂŠes, les distances recommandĂŠes et les marges de sĂŠcuritĂŠ qui en dĂŠcoulent pour chaque bande de frĂŠquence et chaque antenne. Ă ces distance et des distance supĂŠrieures, la densitĂŠ de puissance du champ de radiofrĂŠquence est infĂŠrieur aux limites gĂŠnĂŠralement admises pour la population. Page 4-24 Chapter 4: Legal and regulatory information Compliance with safety standards Table 102 Minimum safe distances for PTP 700 at maximum transmitter power Antenna P (W) (*1) (*2) d (m) (*3) Parabolic 6 ft (38.1 dBi) 0.635 5248.1 5.15 Flat plate 2 ft (28.5 dBi) 0.635 575.4 1.71 Integrated (21.0 dBi) 0.635 125.9 0.80 Sectorized (17.0 dBi) 0.635 40.7 0.45 Omni (13.0 dBi) 0.635 16.2 0.29 (*1) P: maximum average transmit power capability of the radio (Watt) capacitĂŠ de puissance d'ĂŠmission moyenne maximale de la radio (Watt) (*2) G: total transmit gain as a factor, converted from dB, including 0.9 dB cable loss for connectorised antennas gain total d'ĂŠmission, converti Ă partir de la valeur en dB prenant en compte une perte de 0.9 dB correspondant aux câbles de connexion nĂŠcessaire pour les antennes externes (*3) d: minimum distance from the antenna (meters) distance minimale de source ponctuelle (en mètres) Note Gain of antenna in dBi = 10*log(G). The regulations require that the power used for the calculations is the maximum power in the transmit burst subject to allowance for source-based time-averaging. Remarque Gain de l'antenne en dBi = 10*log(G). Les règlements exigent que la puissance utilisĂŠe pour les calculs soit la puissance maximale de la rafale de transmission soumis Ă une rĂŠduction pour prendre en compte le rapport cyclique pour les signaux modulĂŠs dans le temps. Minimum separation distances for other transmitter powers and antenna gains The minimum separation distances can be calculated for any transmit power or antenna gain using the formula provided in Calculation of power density on page 4-24. In many deployments, the antenna gains will be lower than the maximum listed in Table 102 and the transmitter power will be reduced to comply with applicable regulations; in such cases, the minimum separation distances will be significantly reduced compared with the results in Table 102. Page 4-25 Chapter 4: Legal and regulatory information Compliance with safety standards Minimum separation distances in FCC bands The minimum separation distances for operation in FCC regulatory bands are listed in Table 103. Table 103 Minimum safe distances for FCC bands Band Antenna P (W) (*1) (*2) d (m) (*3) 4.9 GHz Parabolic 6 ft (36.0 dBi) Parabolic 6 ft (38.1 dBi) 0.635 5248.1 5.15 Flat Plate (28.5 dBi) 0.635 575.4 1.71 Sectorized (17.0 dBi) 0.080 40.7 0.16 Omni (13.0 dBi) 0.201 16.2 0.16 Integrated (23.0 dBi) Sectorized (17.0 dBi) Omni (13.0 dBi) 5.1 GHz Parabolic 4 ft (34.5 dBi) Integrated (23.0 dBi) Sectorized (17.0 dBi) Omni (13.0 dBi) 5.2 GHz, 5.4 GHz Parabolic 4 ft (34.9 dBi) Integrated (23.0 dBi) Sectorized (17.0 dBi) Omni (13.0 dBi) 5.8 GHz (*1) P: maximum average transmit power capability of the radio (Watt) (*2) G: total transmit gain as a factor, converted from dB, including 0.9 dB cable loss for connectorised antennas (*3) d: minimum distance from antenna (meters) Page 4-26 Chapter 4: Legal and regulatory information Compliance with safety standards Hazardous location compliance The PTP 700 ATEX/HAZLOC ODUs have been certified for operation in the following hazardous locations: ATEX The products have been approved under an âIntrinsic Safetyâ assessment as defined in EN6007911:2007. The approval is given by certificate number TRAC09ATEX31224X, issued by TRaC Global, with the specific level of coverage shown below: ⢠II 3 G Ex ic IIC T4 ⢠II - Equipment group (surface applications) ⢠3 - Equipment category (infrequent exposure) ⢠G - Atmosphere (Gas) ⢠ic - Protection concept (intrinsic safety) ⢠IIC - Gas group (up to and including Hydrogen and Acetylene) ⢠T4 - Temperature class (135°C) HAZLOC The products have been assessed and found compliant with the requirements of UL1604 and CSA C22.2 No. 213 for the following conditions. The approval is given by MET Labs under File Reference E113068, with the specific level of coverage shown below: ⢠Complies with UL1604 and CSA C22.2 No. 213 ⢠Class I - Gases, Vapors and Liquids (surface applications) ⢠Div â 2 (Infrequent Exposure) ⢠Gas Groups - A, B, C, D (up to and including Hydrogen and Acetylene) ⢠Operating Temperature Code - T4 (135°C) Page 4-27 Chapter 4: Legal and regulatory information Compliance with radio regulations Compliance with radio regulations This section describes how the PTP 700 complies with the radio regulations that are in force in various countries. Caution Where necessary, the end user is responsible for obtaining any National licenses required to operate this product and these must be obtained before using the product in any particular country. Contact the appropriate national administrations for details of the conditions of use for the bands in question and any exceptions that might apply. Caution Changes or modifications not expressly approved by Cambium Networks could void the userâs authority to operate the system. Caution For the connectorized version of the product and in order to reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the Effective Isotropically Radiated Power (EIRP) is not more than that permitted for successful communication. Attention Le cas ĂŠchĂŠant, l'utilisateur final est responsable de l'obtention des licences nationales nĂŠcessaires pour faire fonctionner ce produit. Celles-ci doivent ĂŞtre obtenus avant d'utiliser le produit dans un pays particulier. Contactez les administrations nationales concernĂŠes pour les dĂŠtails des conditions d'utilisation des bandes en question, et toutes les exceptions qui pourraient s'appliquer Attention Les changements ou modifications non expressĂŠment approuvĂŠs par les rĂŠseaux de Cambium pourraient annuler l'autoritĂŠ de l'utilisateur Ă faire fonctionner le système. Attention Pour la version du produit avec une antenne externe, et afin de rĂŠduire le risque d'interfĂŠrence avec d'autres utilisateurs, le type d'antenne et son gain doivent ĂŞtre choisis afin que la puissance isotrope rayonnĂŠe ĂŠquivalente (PIRE) ne soit pas supĂŠrieure au minimum nĂŠcessaire pour ĂŠtablir une liaison de la qualitĂŠ requise. Page 4-28 Chapter 4: Legal and regulatory information Compliance with radio regulations Type approvals The system has been tested against various local technical regulations and found to comply. Table 104 to Table 108 list the radio specification type approvals that have been granted for PTP 700 products. Some of the frequency bands in which the system operates are âlicense exemptâ and the system is allowed to be used provided it does not cause interference. In these bands, the licensing authority does not guarantee protection against interference from other products and installations. Table 104 Radio certifications (4.9 GHz) Region Regulatory approvals USA FCC 47 CFR Part 90 Canada IC RSS-211, Issue 4 Europe Europe EN302 625; V1.1.1 Broadband Disaster Relief (BBDR) Brazil ANATEL Certification No: 0934-06-3277 Table 105 Radio certifications (5.1 GHz) Region Regulatory approvals USA FCC 47 CFR Part 15 E Table 106 Radio certifications (5.2 GHz) Region Regulatory approvals USA FCC 47 CFR Part 15 E Canada IC RSS-210 Issue 8, Annex 9 (or latest) Table 107 Radio certifications (5.4 GHz) Region Regulatory approvals USA FCC 47 CFR Part 15 E Canada IC RSS-210 Issue 8, Annex 9 (or latest) Europe ETSI EN301 893 v1.6.1 Page 4-29 Chapter 4: Legal and regulatory information Compliance with radio regulations Table 108 Radio certifications (5.8 GHz) Region Regulatory approvals USA FCC 47 CFR Part 15 C Canada IC RSS-210 Issue 8, Annex 8 (or latest) Denmark Radio Interface 00 007 Eire ComReg 02/71R4 Germany Order No 47/2007 Iceland ETSI EN302 502 v1.2.1 Finland ETSI EN302 502 v1.2.1 Greece ETSI EN302 502 v1.2.1 Liechtenstein ETSI EN302 502 v1.2.1 Norway REG 2009-06-02 no. 580 Portugal ETSI EN302 502 v1.2.1 Serbia ETSI EN302 502 v1.2.1 Spain CNAF 2010 Switzerland ETSI EN302 502 v1.2.1 UK UK IR 2007 FCC/IC compliance The PTP 700 complies with the regulations that are in force in the USA and Canada. Caution If this equipment does cause interference to radio or television reception, refer to Radio and television interference on page 8-14 for corrective actions. Attention Si cet ĂŠquipement cause des interfĂŠrences Ă la rĂŠception radio ou tĂŠlĂŠvision, reportezvous a la section Radio and television interference page 8-14 pour dĂŠterminer comment remĂŠdier au problème. FCC product labels FCC identifiers are reproduced on the product labels for the FCC/IC regional variant (Figure 106 and Figure 107). Page 4-30 Chapter 4: Legal and regulatory information Compliance with radio regulations Figure 106 FCC and IC certifications on Connectorized+Integrated ODU product labels Figure 107 FCC and IC certifications on Connectorized ODU product labels Industry Canada product labels Industry Canada Certification Numbers are reproduced on the product labels for the FCC/IC regional variant (Figure 106 and Figure 107) and also on the Rest of the World (RoW) regional variant (Figure 108 and Figure 109). Figure 108 IC certification on Connectorized+Integrated ODU product labels Page 4-31 Chapter 4: Legal and regulatory information Compliance with radio regulations Figure 109 IC certification on Connectorized ODU product labels 4.9 GHz FCC and IC notification The system has been approved under FCC Part 90 and Industry Canada RSS-111 for Public Safety Agency usage. The installer or operator is responsible for obtaining the appropriate site licenses before installing or using the system. Utilisation de la bande 4.9 GHz FCC et IC Le système a ĂŠtĂŠ approuvĂŠ en vertu de FCC Part 90 et Industrie Canada RSS-111 pour l'utilisation par l'Agence de la SĂŠcuritĂŠ publique. L'installateur ou l'exploitant est responsable de l'obtention des licences de appropriĂŠes avant d'installer ou d'utiliser le système. 5.1 GHz FCC notification This device complies with part 15E of the US FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. For the connectorized version of the product and in order to reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that permitted by the regulations. The transmitted power must be reduced to achieve this requirement. 5.2 GHz and 5.4 GHz FCC and IC notification This device complies with part 15E of the US FCC Rules and Regulations and with Industry Canada RSS-210 Annex 9. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. In Canada, users should be cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250 â 5350 MHz and 5650 â 5850 MHz and these radars could cause interference and/or damage to license-exempt local area networks (LELAN). Page 4-32 Chapter 4: Legal and regulatory information Compliance with radio regulations For the connectorized version of the product and in order to reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that permitted by the regulations. The transmitted power must be reduced to achieve this requirement. Utilisation de la bande 5.4 GHz FCC et IC Cet appareil est conforme Ă la Section 15E de la rĂŠglementation FCC aux Ătats-Unis et aux règlementations et avec Industrie Canada RSS-210 Annexe 9. Son fonctionnement est soumis aux deux conditions suivantes: (1) Ce dispositif ne doit pas causer d'interfĂŠrences nuisibles, et (2) Cet appareil doit tolĂŠrer toute interfĂŠrence reçue, y compris les interfĂŠrences pouvant entraĂŽner un fonctionnement indĂŠsirable. Au Canada, les utilisateurs doivent prendre garde au fait que les radars Ă haute puissance sont considères comme les utilisateurs prioritaires de 5250 Ă 5350 MHz et 5650 Ă 5850 MHz et ces radars peuvent causer des interfĂŠrences et / ou interfĂŠrer avec un rĂŠseau local ne nĂŠcessitant pas de licence. Pour la version du produit avec antenne externe et afin de rĂŠduire le risque d'interfĂŠrence avec d'autres utilisateurs, le type d'antenne et son gain doivent ĂŞtre choisis afin que la puissance isotrope rayonnĂŠe ĂŠquivalente (PIRE) ne soit pas supĂŠrieure Ă celle permise par la règlementation. Il peut ĂŞtre nĂŠcessaire de rĂŠduire la puissance transmise doit ĂŞtre rĂŠduite pour satisfaire cette exigence. 5.8 GHz FCC notification This device complies with part 15C of the US FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 5.8 GHz IC notification RSS-GEN issue 3 (7.1.3) Licence-Exempt Radio Apparatus: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prĂŠsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisĂŠe aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioĂŠlectrique subi, mĂŞme si le brouillage est susceptible d'en compromettre le fonctionnement. In Canada, high power radars are allocated as primary users (meaning they have priority) of the 5650 â 5850 MHz spectrum. These radars could cause interference or damage to license-exempt local area network (LE-LAN) devices. Au Canada, les radars Ă haute puissance sont dĂŠsignĂŠs comme utilisateurs principaux (ils ont la prioritĂŠ) de la 5650 - spectre 5850 MHz. Ces radars peuvent causer des interfĂŠrences et / ou interfĂŠrer avec un rĂŠseau local ne nĂŠcessitant pas de licence. Page 4-33 Chapter 4: Legal and regulatory information Compliance with radio regulations 5.1 GHz band edge channel power reduction Equivalent isotropic radiated power (EIRP) is restricted in edge channels when the PTP 700 is operated the 5.1 GHz band with the USA country license. The amount of EIRP reduction has been determined during regulatory testing and cannot be changed by professional installers or end users. Units intended for the USA market are locked for use in the USA and cannot be operated under the regulations for other regulatory domains. The PTP 700 takes into account the antenna gain and cable loss configured by the professional installer in the web-based interface to limit the EIRP to ensure regulatory compliance. No additional action is required by the installer to reduce transmitter power in band edge channels. The maximum EIRP in band edge channels for the USA 5.1 GHz band is listed in Table 109. Table 109 Edge channel power reduction in regulatory band 84 Channel Bandwidth Channel Frequency Maximum EIRP 5 MHz Below 5158 MHz 26 dBm 5158 to 5200 MHz 30 dBm Above 5200 MHz 33 dBm Below 5164 23 dBm 5164 and above 31 dBm Below 5170 23 dBm 5170 to 5181 31 dBm Above 5181 37 dBm Below 5175 23 dBm 5175 to 5187 30 dBm Above 5187 36 dBm Below 5187 24 dBm 5187 to 5200 30 dBm Above 5200 35 dBm Below 5200 24 dBm 5200 and above 30 dBm Below 5205 23 dBm 5205 and above 30 dBm 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz Page 4-34 Chapter 4: Legal and regulatory information Compliance with radio regulations 5.2 GHz band edge channel power reduction Equivalent isotropic radiated power (EIRP) is restricted in edge channels when the PTP 700 is operated the 5.2 GHz band with the USA or Canada country license. The amount of EIRP reduction has been determined during regulatory testing and cannot be changed by professional installers or end users. Units intended for the USA and Canada market are locked for use in the USA or Canada and cannot be operated under the regulations for other regulatory domains. The PTP 700 takes into account the antenna gain and cable loss configured by the professional installer in the web-based interface to limit the EIRP to ensure regulatory compliance. No additional action is required by the installer to reduce transmitter power in band edge channels. The maximum EIRP in band edge channels for the USA and Canada 5.2 GHz band is listed in Table 110. Table 110 Edge channel power reduction in regulatory band 38 Channel Bandwidth Channel Frequency Maximum EIRP 5 MHz Below 5256.0 MHz 24 dBm Above 5344.0 MHz 24 dBm Below 5260.0 MHz 23 dBm Above 5337.0 MHz 23 dBm Below 5267.0 MHz 22 dBm Above 5330.0 MHz 22 dBm Below 5271.0 MHz 25 dBm Above 5325.0 MHz 21 dBm Below 5280.0 MHz 25 dBm Above 5308.0 MHz 23 dBm Below 5290.0 MHz 24 dBm Above 5299.0 MHz 20 dBm Below 5295.0 MHz 24 dBm Above 5295.0 MHz 20 dBm 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz 5.4 GHz band edge channel power reduction Equivalent isotropic radiated power (EIRP) is restricted in edge channels when the PTP 700 is operated the 5.4 GHz band with the USA or Canada country license. The amount of EIRP reduction has been determined during regulatory testing and cannot be changed by professional installers or end users. Units intended for the USA and Canada market are locked for use in the USA or Canada and cannot be operated under the regulations for other regulatory domains. Page 4-35 Chapter 4: Legal and regulatory information Compliance with radio regulations The PTP 700 takes into account the antenna gain and cable loss configured by the professional installer in the web-based interface to limit the EIRP to ensure regulatory compliance. No additional action is required by the installer to reduce transmitter power in band edge channels. The maximum EIRP in band edge channels for the USA and Canada 5.4 GHz band is listed in Table 111. RĂŠduction de puissance aux bords de la bande 5.4 GHz La Puissance isotrope rayonnĂŠe ĂŠquivalente (PIRE) est limitĂŠe dans les canaux en bord de la bandes lorsque le PTP 700 est configurĂŠ pour utiliser la band 5,4 GHz aux les Etats-Unis ou au Canada. La rĂŠduction de la PIRE a ĂŠtĂŠ dĂŠterminĂŠe lors de tests rĂŠglementaires et ne peut ĂŞtre changĂŠe par des installateurs professionnels ou les utilisateurs. Les PTP 700 destinĂŠes aux USA et Canada sont limitĂŠes pour opĂŠrer exclusivement aux Ătats-Unis ou au Canada et ne peuvent pas ĂŞtre configurĂŠs pour adhĂŠrer Ă la rĂŠglementation dâautres pays. Le PTP 700 prend en compte le gain de l'antenne et les pertes des câbles de connexion configurĂŠs par l'installateur professionnel via l'interface graphique pour limiter la PIRE pour assurer la conformitĂŠ Ă la rĂŠglementation en vigueur. Aucune action supplĂŠmentaire n'est requise par l'installateur afin de rĂŠduire la puissance d'ĂŠmission dans les canaux aux bords de bande. La PIRE maximale dans les canaux aux bords de bande 5,4 GHz pour les Etats-Unis et le Canada est listĂŠe dans la Table 111. Table 111 Edge channel power reduction in regulatory bands 12 and 13 Channel Bandwidth Channel Frequency Maximum EIRP 5 MHz Below 5476.0 MHz 24 dBm Above 5720.0 MHz 24 dBm Below 5478.0 MHz 27 dBm Above 5715.0 MHz 25 dBm Below 5480.0 MHz 29 dBm Above 5709.0 MHz 26 dBm Below 5482.0 MHz 30 dBm Above 5704.0 MHz 23 dBm Below 5492.0 MHz 27 dBm Above 5694.0 MHz 25 dBm Below 5500.0 MHz 28 dBm Above 5691.0 MHz 24 dBm Below 5508.0 MHz 24 dBm Above 5686.0 MHz 22 dBm 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz Page 4-36 Chapter 4: Legal and regulatory information Compliance with radio regulations 5.8 GHz band edge channel power reduction Transmitter power is restricted in edge channels when the PTP 700 is operated the 5.8 GHz band with the USA or Canada country license. The amount of transmitter power reduction has been determined during regulatory testing and cannot be changed by professional installers or end users. Units intended for the USA and Canada market are locked for use in the USA or Canada and cannot be operated under the regulations for other regulatory domains. The maximum transmitter power in band edge channels for the FCC 5.8 GHz band is listed in Table 112. RĂŠduction de puissance aux bords de la bande 5.8 GHz La Puissance isotrope rayonnĂŠe ĂŠquivalente (PIRE) est limitĂŠe dans les canaux en bord de la bandes lorsque le PTP 700 est configurĂŠ pour utiliser la band 5,8 GHz aux les Etats-Unis ou au Canada. La rĂŠduction de la PIRE a ĂŠtĂŠ dĂŠterminĂŠe lors de tests rĂŠglementaires et ne peut ĂŞtre changĂŠe par des installateurs professionnels ou les utilisateurs. Les PTP 700 destinĂŠes aux USA et Canada sont limitĂŠes pour opĂŠrer exclusivement aux Ătats-Unis ou au Canada et ne peuvent pas ĂŞtre configurĂŠs pour adhĂŠrer Ă la rĂŠglementation dâautres pays. La PIRE maximale dans les canaux aux bords de bande 5,4 GHz pour les Etats-Unis et le Canada est listĂŠe dans la Table 112. Table 112 Edge channel power reduction in regulatory band 1 Channel Bandwidth Channel Frequency Maximum conducted power 5 MHz Below 5733.0 MHz 24 dBm Above 5838.0 MHz 24 dBm Below 5737.0 MHz 25 dBm Above 5837.0 MHz 25 dBm Below 5740.0 MHz 25 dBm Above 5835.0 MHz 25 dBm Below 5742.0 MHz 25 dBm Above 5832.0 MHz 25 dBm Below 5752.0 MHz 25 dBm Above 5822.0 MHz 25 dBm Below 5765.0 MHz 25 dBm Above 5810.0 MHz 25 dBm Below 5778.0 MHz 23 dBm Above 5795.0 MHz 22 dBm 10 MHz 15 MHz 20 MHz 30 MHz 40 MHz 45 MHz Page 4-37 Chapter 4: Legal and regulatory information Compliance with radio regulations Selection of antennas For guidance on the selection of dedicated external antennas refer to Choosing external antennas on page 3-29. For a list of antennas submitted to the FCC and IC for use with the PTP 700 refer to FCC and IC approved antennas on page 2-20. Note Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that necessary for successful communication. Remarque ConformĂŠment Ă la rĂŠglementation d'Industrie Canada, le prĂŠsent ĂŠmetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infĂŠrieur) approuvĂŠ pour l'ĂŠmetteur par Industrie Canada. Dans le but de rĂŠduire les risques de brouillage radioĂŠlectrique Ă l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnĂŠe ĂŠquivalente (p.i.r.e.) ne dĂŠpasse pas l'intensitĂŠ nĂŠcessaire Ă l'ĂŠtablissement d'une communication satisfaisante. European Union compliance The PTP 700 complies with the regulations that are in force in the European Union. Warning This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. If this equipment does cause interference to radio or television reception, refer to Radio and television interference on page 8-14 for corrective actions. EU product labels The European R&TTE directive 1999/5/EC Certification Number is reproduced on the product labels (Figure 110 and Figure 111). Page 4-38 Chapter 4: Legal and regulatory information Compliance with radio regulations Figure 110 European Union certification on integrated product label Figure 111 European Union certification on connectorized product label 5.4 GHz European Union notification The PTP 700 product is a two-way radio transceiver suitable for use in Broadband Wireless Access System (WAS), Radio Local Area Network (RLAN), or Fixed Wireless Access (FWA) systems. It is a Class 1 device and uses operating frequencies that are harmonized throughout the EU member states. The operator is responsible for obtaining any national licenses required to operate this product and these must be obtained before using the product in any particular country. Hereby, Cambium Networks declares that the PTP 700 product complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at the support website (see Contacting Cambium Networks on page 1). 5.8 GHz European Union notification The PTP 700 is a Class 2 device as it operates on frequencies that are not harmonized across the EU. Currently the product may only be operated in the countries listed in Table 108. However, the regulatory situation in Europe is changing and the radio spectrum may become available in other countries in future. See www.ero.dk for further information. The operator is responsible for obtaining any national licenses required to operate this product and these must be obtained before using the product in any particular country. Page 4-39 Chapter 4: Legal and regulatory information Compliance with radio regulations Caution This equipment operates as a secondary application, so it has no rights against harmful interference, even if generated by similar equipment, and must not cause harmful interference on systems operating as primary applications. Hereby, Cambium Networks declares that the PTP 700 product complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at the support website (see Contacting Cambium Networks on page 1). 5.8 GHz operation in the UK The PTP 700 Connectorized product has been notified for operation in the UK, and when operated in accordance with instructions for use it is compliant with UK Interface Requirement IR2007. For UK use, installations must conform to the requirements of IR2007 in terms of EIRP spectral density against elevation profile above the local horizon in order to protect Fixed Satellite Services. The frequency range 5795-5815 MHz is assigned to Road Transport & Traffic Telematics (RTTT) in the U.K. and shall not be used by FWA systems in order to protect RTTT devices. UK Interface Requirement IR2007 specifies that radiolocation services shall be protected by a Dynamic Frequency Selection (DFS) mechanism to prevent co-channel operation in the presence of radar signals. Page 4-40
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Cambium Networks Create Date : 2015:05:26 16:31:23+01:00 Modify Date : 2015:05:26 16:35:50+01:00 Subject : phn-4148 000v007 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2015:05:26 16:35:50+01:00 Creator Tool : Acrobat PDFMaker 11 for Word Document ID : uuid:dc3e6046-cd13-494f-a067-06d75559920e Instance ID : uuid:c2d2b4d3-d583-4072-994a-1a76f09d07a7 Format : application/pdf Title : PTP700 Series User Guide Description : phn-4148 000v007 Creator : Cambium Networks Producer : Adobe PDF Library 11.0 Source Modified : D:20150526153046 Company : Cambium Networks A4 Date : Jan 2011 A4 Ordno : phn-1863_001v001 Headline : phn-4148 000v007 Page Layout : OneColumn Page Count : 292EXIF Metadata provided by EXIF.tools