Cambium Networks 50670 Wireless Ethernet Bridge User Manual PTP 670 Series User Guide

Cambium Networks Limited Wireless Ethernet Bridge PTP 670 Series User Guide

Users manual

Download: Cambium Networks 50670 Wireless Ethernet Bridge User Manual PTP 670 Series User Guide
Mirror Download [FCC.gov]Cambium Networks 50670 Wireless Ethernet Bridge User Manual PTP 670 Series User Guide
Document ID3870524
Application IDlgT/9KnINXyT5f/5iD2oqg==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize461kB (5762472 bits)
Date Submitted2018-05-31 00:00:00
Date Available2018-06-11 00:00:00
Creation Date2018-04-24 18:13:31
Producing SoftwareAdobe PDF Library 11.0
Document Lastmod2018-04-24 18:13:35
Document TitlePTP 670 Series User Guide
Document CreatorAcrobat PDFMaker 11 for Word
Document Author: Cambium Networks

Cambium
PTP 670 Series
User Guide
System Release 670-02-51
Accuracy
While reasonable efforts have been made to assure the accuracy of this document, Cambium
Networks assumes no liability resulting from any inaccuracies or omissions in this document, or
from use of the information obtained herein. Cambium reserves the right to make changes to any
products described herein to improve reliability, function, or design, and reserves the right to revise
this document and to make changes from time to time in content hereof with no obligation to notify
any person of revisions or changes. Cambium does not assume any liability arising out of the
application or use of any product, software, or circuit described herein; neither does it convey
license under its patent rights or the rights of others. It is possible that this publication may contain
references to, or information about Cambium products (machines and programs), programming, or
services that are not announced in your country. Such references or information must not be
construed to mean that Cambium intends to announce such Cambium products, programming, or
services in your country.
Copyrights
This document, Cambium products, and 3rd Party software products described in this document
may include or describe copyrighted Cambium and other 3rd Party supplied computer programs
stored in semiconductor memories or other media. Laws in the United States and other countries
preserve for Cambium, its licensors, and other 3rd Party supplied software certain exclusive rights
for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute
and make derivative works of the copyrighted material. Accordingly, any copyrighted material of
Cambium, its licensors, or the 3rd Party software supplied material contained in the Cambium
products described in this document may not be copied, reproduced, reverse engineered,
distributed, merged or modified in any manner without the express written permission of
Cambium. Furthermore, the purchase of Cambium products shall not be deemed to grant either
directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or
patent applications of Cambium or other 3rd Party supplied software, except for the normal nonexclusive, royalty free license to use that arises by operation of law in the sale of a product.
Restrictions
Software and documentation are copyrighted materials. Making unauthorized copies is prohibited
by law. No part of the software or documentation may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or computer language, in any form or
by any means, without prior written permission of Cambium.
License Agreements
The software described in this document is the property of Cambium and its licensors. It is
furnished by express license agreement only and may be used only in accordance with the terms of
such an agreement.
High Risk Materials
Cambium and its supplier(s) specifically disclaim any express or implied warranty of fitness for any
high risk activities or uses of its products including, but not limited to, the operation of nuclear
facilities, aircraft navigation or aircraft communication systems, air traffic control, life support, or
weapons systems (“High Risk Use”). Any High Risk is unauthorized, is made at your own risk and
you shall be responsible for any and all losses, damage or claims arising out of any High Risk Use.
© 2017 Cambium Networks Limited. All Rights Reserved.
phn-4431_004v001 (October 2017)
Contents
About This User Guide ....................................................................................................................... 1
Contacting Cambium Networks .............................................................................................. 1
Purpose ..................................................................................................................................... 2
Cross references ....................................................................................................................... 2
Feedback ................................................................................................................................... 2
Important regulatory information.................................................................................................. 3
Complying with rules for the country of operation .............................................................. 3
Radar avoidance ....................................................................................................................... 3
USA specific information......................................................................................................... 3
Canada specific information ................................................................................................... 4
Renseignements specifiques au Canada ............................................................................... 5
EU specific information ........................................................................................................... 5
EU Declaration of Conformity ................................................................................................. 5
Application firmware ............................................................................................................... 6
Specific expertise and training for professional installers ................................................... 6
External antennas..................................................................................................................... 6
Antennas externes ................................................................................................................... 6
Ethernet networking skills ....................................................................................................... 6
Lightning protection................................................................................................................. 7
Training ..................................................................................................................................... 7
Problems and warranty .................................................................................................................. 8
Reporting problems ................................................................................................................. 8
Repair and service .................................................................................................................... 8
Hardware warranty .................................................................................................................. 8
Security advice ................................................................................................................................ 9
Warnings, cautions, and notes .................................................................................................... 10
Warnings ................................................................................................................................. 10
Cautions .................................................................................................................................. 10
Notes ....................................................................................................................................... 10
Caring for the environment .......................................................................................................... 11
In EU countries ....................................................................................................................... 11
In non-EU countries ............................................................................................................... 11
Chapter 1: Product description ................................................................................................... 1-1
Overview of the PTP 670 Series .................................................................................................. 1-2
Purpose .................................................................................................................................. 1-2
Key features ........................................................................................................................... 1-2
Frequency bands ................................................................................................................... 1-3
Typical bridge deployment .................................................................................................. 1-4
Hardware overview ............................................................................................................... 1-5
Wireless operation ....................................................................................................................... 1-7
Wireless topology ................................................................................................................. 1-7
Page i
Contents
Time division duplexing in PTP wireless topology ............................................................ 1-8
Time division duplexing in HCMP wireless topology ...................................................... 1-10
Link mode optimization ...................................................................................................... 1-12
Link symmetry ..................................................................................................................... 1-13
OFDM and channel bandwidth .......................................................................................... 1-15
Spectrum management ...................................................................................................... 1-16
Adaptive modulation .......................................................................................................... 1-17
MIMO .................................................................................................................................... 1-18
Dynamic spectrum optimization ........................................................................................ 1-19
Radar avoidance .................................................................................................................. 1-19
Access method .................................................................................................................... 1-20
Wireless encryption ............................................................................................................ 1-21
TLS RSA ............................................................................................................................... 1-22
TLS PSK 128-bit and TLS PSK 256-bit ............................................................................... 1-23
Over the air rekeying........................................................................................................... 1-24
License keys and regulatory bands ................................................................................... 1-24
Designing PTP networks ..................................................................................................... 1-25
TDD synchronization ........................................................................................................... 1-26
Ethernet bridging ....................................................................................................................... 1-30
Ethernet ports ...................................................................................................................... 1-30
Data and management services ........................................................................................ 1-30
Ethernet switching .............................................................................................................. 1-31
Data Service ......................................................................................................................... 1-32
Second Data Service ........................................................................................................... 1-34
Out-of-Band Management Service .................................................................................... 1-36
Ethernet loopback mode..................................................................................................... 1-37
Protocol model for PTP topology ...................................................................................... 1-38
Synchronous Ethernet ........................................................................................................ 1-40
IEEE 1588-2008 Transparent Clock .................................................................................... 1-42
TDM bridging.............................................................................................................................. 1-43
TDM description .................................................................................................................. 1-43
Lowest TDM modulation mode ......................................................................................... 1-44
Fixed frequency operation ................................................................................................. 1-44
Ethernet cables for TDM ..................................................................................................... 1-45
Further reading .................................................................................................................... 1-45
System management ................................................................................................................. 1-46
Management agent ............................................................................................................. 1-46
Network management ........................................................................................................ 1-47
IPv6 ....................................................................................................................................... 1-48
Web server ........................................................................................................................... 1-50
RADIUS authentication ....................................................................................................... 1-52
SNMP.................................................................................................................................... 1-53
Simple Network Time Protocol (SNTP) ............................................................................. 1-53
SNMPv3 security ................................................................................................................. 1-54
System logging (syslog) ..................................................................................................... 1-57
AES license .......................................................................................................................... 1-57
Page ii
Contents
Critical security parameters ............................................................................................... 1-58
Software upgrade................................................................................................................ 1-59
Capability upgrades ............................................................................................................ 1-60
Recovery mode.................................................................................................................... 1-60
Chapter 2: System hardware ...................................................................................................... 2-1
Outdoor unit (ODU) ..................................................................................................................... 2-2
ODU description .................................................................................................................... 2-2
PTP 670 Integrated ODU ....................................................................................................... 2-3
PTP 670 Connectorized ODU ................................................................................................ 2-5
ODU capability upgrades ..................................................................................................... 2-7
ODU accessories ................................................................................................................... 2-8
ODU mounting brackets ....................................................................................................... 2-8
ODU interfaces ...................................................................................................................... 2-9
ODU specifications .............................................................................................................. 2-11
Power supply units (PSU).......................................................................................................... 2-12
PSU description ................................................................................................................... 2-12
PSU part numbers ............................................................................................................... 2-15
AC Power Injector 56V interfaces ...................................................................................... 2-16
AC+DC Enhanced Power Injector 56V interfaces ............................................................. 2-17
CMM5 Power and Sync Injector interfaces ....................................................................... 2-18
PSU specifications............................................................................................................... 2-19
Antennas and antenna cabling ................................................................................................. 2-21
Antenna requirements ........................................................................................................ 2-21
RF cable and connectors .................................................................................................... 2-21
Antenna accessories ........................................................................................................... 2-22
FCC approved antennas...................................................................................................... 2-22
ISEDC approved antennas .................................................................................................. 2-25
Antennes approuvées par ISDEC....................................................................................... 2-26
Ethernet cabling ......................................................................................................................... 2-30
Ethernet standards and cable lengths ............................................................................... 2-30
Outdoor copper Cat5e Ethernet cable ............................................................................... 2-31
Cable grounding kit ............................................................................................................. 2-32
Lightning protection unit (LPU) and grounding kit .......................................................... 2-33
LPU for GPS drop cables .................................................................................................... 2-34
RJ45 connectors and spare glands.................................................................................... 2-35
Cable hoisting grip .............................................................................................................. 2-35
Indoor Cat5e cable .............................................................................................................. 2-36
SFP module kits ................................................................................................................... 2-36
Optical cable and connectors ............................................................................................. 2-38
PTP-SYNC unit ............................................................................................................................ 2-39
PTP-SYNC unit description ................................................................................................. 2-39
PTP-SYNC part numbers .................................................................................................... 2-40
PTP-SYNC unit interfaces ................................................................................................... 2-41
PTP-SYNC specifications .................................................................................................... 2-42
GPS receivers ............................................................................................................................. 2-45
Trimble Acutime™ GG GPS receiver for PTP-SYNC........................................................ 2-45
Page iii
Contents
Universal GPS...................................................................................................................... 2-46
Network indoor unit (NIDU) ...................................................................................................... 2-47
NIDU description ................................................................................................................. 2-47
NIDU part numbers ............................................................................................................. 2-48
NIDU interfaces ................................................................................................................... 2-48
NIDU specifications ............................................................................................................. 2-49
Chapter 3: System planning ....................................................................................................... 3-1
Typical deployment ..................................................................................................................... 3-2
ODU with POE interface to PSU ........................................................................................... 3-2
E1 or T1 interfaces................................................................................................................. 3-5
SFP and Aux Ethernet interfaces ......................................................................................... 3-6
GPS receiver interfaces......................................................................................................... 3-9
Site planning............................................................................................................................... 3-11
Grounding and lightning protection.................................................................................. 3-11
Lightning protection zones ................................................................................................. 3-11
Site grounding system........................................................................................................ 3-12
ODU and external antenna location .................................................................................. 3-13
ODU ambient temperature limits ...................................................................................... 3-13
ODU wind loading ............................................................................................................... 3-14
Hazardous locations ............................................................................................................ 3-14
PSU DC power supply......................................................................................................... 3-15
PSU AC power supply......................................................................................................... 3-15
PSU location ........................................................................................................................ 3-15
PTP-SYNC location .............................................................................................................. 3-15
GPS receiver location.......................................................................................................... 3-15
NIDU location ...................................................................................................................... 3-16
Drop cable grounding points ............................................................................................. 3-17
LPU location......................................................................................................................... 3-17
Multiple LPUs ...................................................................................................................... 3-17
Radio spectrum planning .......................................................................................................... 3-20
General wireless specifications ......................................................................................... 3-20
Regulatory limits ................................................................................................................. 3-21
Conforming to the limits..................................................................................................... 3-22
Available spectrum ............................................................................................................. 3-22
Channel bandwidth ............................................................................................................. 3-22
Frequency selection ............................................................................................................ 3-22
Link planning .............................................................................................................................. 3-24
LINKPlanner ......................................................................................................................... 3-24
Range and obstacles ........................................................................................................... 3-24
LINKPlanner for synchronized networks ........................................................................... 3-25
Path loss ............................................................................................................................... 3-25
Adaptive modulation .......................................................................................................... 3-25
Calculating data rate capacity ............................................................................................ 3-26
Planning for connectorized units .............................................................................................. 3-29
When to install connectorized units .................................................................................. 3-29
Choosing external antennas .............................................................................................. 3-29
Page iv
Contents
Calculating RF cable length (5.8 GHz FCC only) ............................................................... 3-30
Configuration options for TDD synchronization ..................................................................... 3-31
Using PTP-SYNC ................................................................................................................. 3-31
Using CMM5 ........................................................................................................................ 3-35
Using a direct connection between ODUs ........................................................................ 3-35
Data network planning .............................................................................................................. 3-36
Ethernet interfaces .............................................................................................................. 3-36
Layer two control protocols ............................................................................................... 3-36
Ethernet port allocation for PTP topology ........................................................................ 3-37
Ethernet port allocation for HCMP topology .................................................................... 3-46
VLAN membership .............................................................................................................. 3-50
Priority for management traffic ......................................................................................... 3-50
IP interface ........................................................................................................................... 3-50
Quality of service for bridged Ethernet traffic .................................................................. 3-51
“Daisy-chaining” PTP 670 links ......................................................................................... 3-52
Green Ethernet switches..................................................................................................... 3-52
TDM network planning .............................................................................................................. 3-53
Network management planning ............................................................................................... 3-54
Planning for SNMP operation ............................................................................................ 3-54
Supported diagnostic alarms ............................................................................................. 3-54
Enabling SNMP ................................................................................................................... 3-55
Security planning ....................................................................................................................... 3-56
Planning for SNTP operation ............................................................................................. 3-56
Using the Security Wizard .................................................................................................. 3-56
Planning for wireless encryption ....................................................................................... 3-57
Planning for HTTPS/TLS operation.................................................................................... 3-59
Planning for protocols and ports ....................................................................................... 3-60
Planning for SNMPv3 operation ........................................................................................ 3-60
Planning for RADIUS operation ......................................................................................... 3-63
System threshold, output power and link loss........................................................................ 3-65
4.8 GHz to 5.9 GHz Frequency Variant............................................................................... 3-66
4.9 GHz to 6.05 GHz Frequency Variant............................................................................. 3-76
Data throughput capacity tables ............................................................................................... 3-86
Data capacity in PTP topology ........................................................................................... 3-86
Data capacity in HCMP topology ..................................................................................... 3-120
TDM traffic load ................................................................................................................. 3-127
Chapter 4: Legal and regulatory information ............................................................................ 4-1
Cambium Networks end user license agreement ..................................................................... 4-2
Definitions .............................................................................................................................. 4-2
Acceptance of this agreement ............................................................................................. 4-2
Grant of license ..................................................................................................................... 4-2
Conditions of use .................................................................................................................. 4-3
Title and restrictions ............................................................................................................. 4-4
Confidentiality ....................................................................................................................... 4-4
Right to use Cambium’s name ............................................................................................. 4-5
Transfer .................................................................................................................................. 4-5
Page v
Contents
Updates .................................................................................................................................. 4-5
Maintenance .......................................................................................................................... 4-5
Disclaimer .............................................................................................................................. 4-6
Limitation of liability ............................................................................................................. 4-6
U.S. government ................................................................................................................... 4-6
Term of license ...................................................................................................................... 4-7
Governing law ....................................................................................................................... 4-7
Assignment ............................................................................................................................ 4-7
Survival of provisions ........................................................................................................... 4-7
Entire agreement ................................................................................................................... 4-7
Third party software.............................................................................................................. 4-7
Compliance with safety standards ........................................................................................... 4-20
Electrical safety compliance ............................................................................................... 4-20
Electromagnetic compatibility (EMC) compliance ........................................................... 4-20
Human exposure to radio frequency energy .................................................................... 4-21
Compliance with radio regulations .......................................................................................... 4-26
Type approvals .................................................................................................................... 4-27
FCC compliance ................................................................................................................... 4-28
ISEDC compliance ............................................................................................................... 4-30
Chapter 5: Installation ................................................................................................................. 5-1
Safety ............................................................................................................................................ 5-2
Power lines ............................................................................................................................ 5-2
Working at heights ................................................................................................................ 5-2
PSU ......................................................................................................................................... 5-2
Grounding and protective earth .......................................................................................... 5-2
AC supply ............................................................................................................................... 5-2
DC supply ............................................................................................................................... 5-3
Powering down before servicing ......................................................................................... 5-3
Primary disconnect device ................................................................................................... 5-3
External cables ...................................................................................................................... 5-3
Drop cable tester ................................................................................................................... 5-3
Grounding PTP-SYNC ........................................................................................................... 5-3
RF exposure near the antenna ............................................................................................. 5-3
Minimum separation distances ........................................................................................... 5-4
Grounding and lightning protection requirements ............................................................ 5-4
Grounding cable installation methods ................................................................................ 5-4
Siting ODUs and antennas ................................................................................................... 5-4
Thermal Safety ...................................................................................................................... 5-4
ODU variants and mounting bracket options ............................................................................ 5-6
Installing the ODU and top LPU .................................................................................................. 5-7
Attach ground cables to the ODU ........................................................................................ 5-7
Mount the ODU on the mast ................................................................................................ 5-7
Mount the top LPU .............................................................................................................. 5-10
Interconnect and ground the ODU and top LPU .............................................................. 5-10
Install external antennas for a Connectorized ODU ................................................................ 5-12
Installing the copper Cat5e Ethernet interface ........................................................................ 5-14
Page vi
Contents
Install the ODU to top LPU drop cable .............................................................................. 5-14
Install the main drop cable ................................................................................................. 5-16
Install the bottom LPU to PSU drop cable ........................................................................ 5-19
Test resistance in the drop cable ....................................................................................... 5-21
Installing the PSU ....................................................................................................................... 5-22
Installing the AC Power Injector 56V ................................................................................. 5-22
Installing the AC+DC Enhanced Power Injector 56V ........................................................ 5-23
Installing the CMM5 ............................................................................................................ 5-24
Installing a PTP-SYNC unit ........................................................................................................ 5-25
Mounting the PTP-SYNC unit ............................................................................................. 5-25
Connecting up the PTP-SYNC unit .................................................................................... 5-26
Powering up the PTP-SYNC installation ........................................................................... 5-28
Installing the Trimble Accutime GPS receiver......................................................................... 5-29
Mounting the GPS receiver ................................................................................................ 5-29
Preparing the GPS drop cable ............................................................................................ 5-29
Assembling an RJ45 plug and housing for GPS .............................................................. 5-30
Assembling a 12 way circular connector .......................................................................... 5-32
Connecting the GPS drop cable ......................................................................................... 5-36
Top grounding point for GPS adapter cable..................................................................... 5-36
Installing and connecting the GPS LPU ............................................................................ 5-38
Installing a NIDU ........................................................................................................................ 5-39
Mounting the NIDU ............................................................................................................. 5-39
Connecting the NIDU to the PSU, LAN and TDM cables ................................................. 5-40
Connecting the NIDU to a DC power supply .................................................................... 5-42
Installing an SFP Ethernet interface ......................................................................................... 5-45
Fitting the long cable gland ................................................................................................ 5-47
Inserting the SFP module ................................................................................................... 5-48
Connecting the cable .......................................................................................................... 5-50
Fitting the gland .................................................................................................................. 5-51
Removing the cable and SFP module ............................................................................... 5-53
Installing an Aux Ethernet interface ......................................................................................... 5-54
Supplemental installation information .................................................................................... 5-55
Stripping drop cable ........................................................................................................... 5-55
Creating a drop cable grounding point ............................................................................. 5-56
Weatherproofing an N type connector.............................................................................. 5-59
Replacing PSU fuses ........................................................................................................... 5-62
Chapter 6: Configuration and alignment ................................................................................... 6-1
Preparing for configuration and alignment ............................................................................... 6-2
Safety precautions ................................................................................................................ 6-2
Regulatory compliance ......................................................................................................... 6-2
Selecting configuration options ........................................................................................... 6-2
Generating license keys ........................................................................................................ 6-3
Connecting to the unit ................................................................................................................. 6-4
Configuring the management PC ........................................................................................ 6-4
Connecting to the PC and powering up .............................................................................. 6-5
Using the web interface............................................................................................................... 6-6
Page vii
Contents
Logging into the web interface ............................................................................................ 6-6
Using the menu options ....................................................................................................... 6-7
Installation menu ......................................................................................................................... 6-9
Starting the Installation Wizard ........................................................................................... 6-9
Disarm Installation page ..................................................................................................... 6-10
Current Installation Summary page .................................................................................. 6-10
Software License Key page ................................................................................................ 6-13
Wireless Topology Configuration page ............................................................................ 6-15
Interface Configuration page ............................................................................................. 6-16
Wireless Configuration page .............................................................................................. 6-25
TDD Frame page.................................................................................................................. 6-32
TDD synchronization page (optional) ................................................................................ 6-33
Confirm Installation Configuration page........................................................................... 6-38
System menu.............................................................................................................................. 6-39
System Configuration page ............................................................................................... 6-39
LAN Configuration page ..................................................................................................... 6-43
QoS Configuration page ..................................................................................................... 6-56
SFP Configuration page ...................................................................................................... 6-59
TDM Configuration page .................................................................................................... 6-62
Authorization Control page ................................................................................................ 6-63
Save and Restore Configuration page .............................................................................. 6-64
Reset Configuration page ................................................................................................... 6-67
Further reading .................................................................................................................... 6-68
Software Upgrade page...................................................................................................... 6-68
Management menu .................................................................................................................... 6-70
Web-Based Management page.......................................................................................... 6-70
Local User Accounts page .................................................................................................. 6-72
RADIUS Configuration page .............................................................................................. 6-77
Webpage Properties page .................................................................................................. 6-78
Email Configuration page ................................................................................................... 6-81
Diagnostic Alarms page...................................................................................................... 6-83
Time Configuration page .................................................................................................... 6-84
Syslog Configuration page ................................................................................................. 6-88
SNMP pages (for SNMPv3) ....................................................................................................... 6-90
Current SNMP Summary (for SNMPv3)............................................................................ 6-90
Step 1: SNMP Configuration (for SNMPv3) ...................................................................... 6-91
Step 2: SNMP MIB-II System Objects (for SNMPv3)........................................................ 6-93
Step 3: SNMP User Policy Configuration (for SNMPv3).................................................. 6-94
Step 4: SNMP User Accounts Configuration (for SNMPv3) ............................................ 6-95
Step 5: SNMP Trap Configuration (for SNMPv3) ............................................................. 6-96
Confirm SNMP Configuration (for SNMPv3) .................................................................... 6-98
SNMP pages (for SNMPv1/2c) .................................................................................................. 6-99
Current SNMP Summary (for SNMPv1/2c) ....................................................................... 6-99
Step 1: SNMP Configuration (for SNMPv1/2c) ................................................................. 6-99
Step 2: SNMP MIB-II System Objects (for SNMPv1/2c) ................................................. 6-100
Step 3: SNMP Trap Configuration (for SNMPv1/2c) ...................................................... 6-101
Page viii
Contents
Confirm SNMP Configuration (for SNMPv1/2c) ............................................................. 6-102
Security menu .......................................................................................................................... 6-103
Preparation ........................................................................................................................ 6-103
Security Configuration Wizard page ............................................................................... 6-103
Security options ................................................................................................................ 6-104
Key of Keys ........................................................................................................................ 6-105
Entropy ............................................................................................................................... 6-106
Enter User Security Banner .............................................................................................. 6-107
Enter Login Information Settings .................................................................................... 6-108
Enter HTTPS Configuration .............................................................................................. 6-109
Configure Wireless Security ............................................................................................. 6-110
HTTP and Telnet options .................................................................................................. 6-113
Confirm Security Configuration ....................................................................................... 6-115
Zeroize CSPs page............................................................................................................. 6-117
Aligning antennas .................................................................................................................... 6-118
Starting up the units ......................................................................................................... 6-118
Checking that the units are armed................................................................................... 6-118
Aligning antennas ............................................................................................................. 6-119
Aligning separate antennas for spatial diversity ............................................................ 6-120
ODU installation tones ...................................................................................................... 6-121
Graphical Install page ....................................................................................................... 6-123
Disarming the units ........................................................................................................... 6-124
Comparing actual to predicted performance ................................................................. 6-125
Other configuration tasks ........................................................................................................ 6-126
Connecting to the network ............................................................................................... 6-126
Upgrading software using TFTP ...................................................................................... 6-127
Chapter 7: Operation ................................................................................................................... 7-1
System summary and status ...................................................................................................... 7-2
System Summary page ........................................................................................................ 7-2
System Status page .............................................................................................................. 7-3
Rebooting and logging out ....................................................................................................... 7-18
Login Information page ...................................................................................................... 7-18
Reboot Wireless Unit page ................................................................................................. 7-18
Change Password page ...................................................................................................... 7-19
Logging out .......................................................................................................................... 7-19
Alarms, alerts and messages .................................................................................................... 7-20
Alarms .................................................................................................................................. 7-20
Email alerts .......................................................................................................................... 7-24
Syslog page ......................................................................................................................... 7-25
Format of syslog server messages .................................................................................... 7-25
Configuration and status messages .................................................................................. 7-26
Event messages................................................................................................................... 7-26
Spectrum Management ............................................................................................................. 7-29
Spectrum Expert and Spectrum Management pages ..................................................... 7-29
Spectrum Expert page ........................................................................................................ 7-30
Spectrum Management page ............................................................................................ 7-34
Page ix
Contents
Spectrum Management Settings ....................................................................................... 7-35
Interpreting the receive spectrum plot .............................................................................. 7-37
Barring channels ................................................................................................................. 7-43
Selecting a Channel and a Time period ............................................................................ 7-45
Interpreting the timeseries plot ......................................................................................... 7-46
Interpreting the Interference Waterfall plot ...................................................................... 7-47
Interpreting the histogram plot .......................................................................................... 7-49
Spectrum Expert example .................................................................................................. 7-50
Managing security ..................................................................................................................... 7-53
Zeroizing critical security parameters ............................................................................... 7-53
System statistics ........................................................................................................................ 7-54
System Statistics page........................................................................................................ 7-54
Wireless Port Counters page .............................................................................................. 7-60
Main Port Counters page (PTP topology only) ................................................................. 7-63
Aux Port Counters page (PTP topology only) ................................................................... 7-66
SFP Port Counters page (PTP topology only) ................................................................... 7-66
Ethernet Port Counters page (HCMP topology only) ....................................................... 7-67
Management Counters page (HCMP topology only) ....................................................... 7-69
SyncE Status page .............................................................................................................. 7-70
Diagnostics Plotter page ..................................................................................................... 7-73
Generate Downloadable Diagnostics page....................................................................... 7-75
Recovery mode........................................................................................................................... 7-77
Entering recovery mode ..................................................................................................... 7-77
Upgrading software image................................................................................................. 7-79
Resetting IP & Ethernet configuration ............................................................................... 7-80
Resetting all configuration data ......................................................................................... 7-82
Zeroize Critical Security Parameters ................................................................................. 7-83
Rebooting the unit............................................................................................................... 7-84
Chapter 8: Troubleshooting ........................................................................................................ 8-1
Cable Diagnostics ......................................................................................................................... 8-2
Test scenarios ........................................................................................................................ 8-2
Cable Diagnostics test........................................................................................................... 8-3
Testing link end hardware ........................................................................................................... 8-7
AC Power Injector 56V LED sequence ................................................................................. 8-7
AC+DC Enhanced Power Injector 56V LED sequence ........................................................ 8-7
Ethernet packet test............................................................................................................. 8-10
Testing the radio link ................................................................................................................. 8-13
No activity ............................................................................................................................ 8-13
Some activity ....................................................................................................................... 8-13
Radio and television interference ...................................................................................... 8-14
Testing PTP-SYNC ...................................................................................................................... 8-15
Checking the PTP-SYNC LEDs ............................................................................................ 8-15
LEDs do not illuminate........................................................................................................ 8-15
STATUS LED is on steady .................................................................................................. 8-16
STATUS LED double-blinks ................................................................................................ 8-16
ODU LED does not illuminate within 90 seconds ............................................................ 8-16
Page x
Contents
ODU LED blinks red............................................................................................................. 8-16
GPS LED does not illuminate or blink on clustered units................................................ 8-16
Testing a TDM link ..................................................................................................................... 8-18
Checking the NIDU LEDs .................................................................................................... 8-18
Performing a TDM loopback test ....................................................................................... 8-19
Checking for 1000BASE-T operation ................................................................................. 8-19
Glossary ............................................................................................................................................... I
Page xi
About This User Guide
This guide describes the planning, installation, configuration and operation of the Cambium
PTP 670 Series of point-to-point wireless Ethernet bridges. It is intended for use by the system
designer, system installer and system administrator.
For radio network design, refer to the following chapters:
•
Chapter 1: Product description
•
Chapter 2: System hardware
•
Chapter 3: System planning
•
Chapter 4: Legal and regulatory information
For radio equipment installation, refer to the following chapter:
•
Chapter 5: Installation
For system configuration, monitoring and fault-finding, refer to the following chapters:
•
Chapter 6: Configuration and alignment
•
Chapter 7: Operation
•
Chapter 8: Troubleshooting
Contacting Cambium Networks
Support website:
https://support.cambiumnetworks.com
Main website:
http://www.cambiumnetworks.com
Sales enquiries:
solutions@cambiumnetworks.com
Support enquiries:
https://support.cambiumnetworks.com
RMA enquiries
https://support.cambiumnetworks.com
Telephone number list:
http://www.cambiumnetworks.com/contact-us/
Address:
Cambium Networks Limited,
Linhay Business Park,
Eastern Road,
Ashburton,
Devon, UK,
TQ13 7UP
Page 1
About This User Guide
Important regulatory information
Purpose
Cambium Networks Point-To-Point (PTP) documents are intended to instruct and assist
personnel in the operation, installation and maintenance of the Cambium PTP equipment and
ancillary devices. It is recommended that all personnel engaged in such activities be properly
trained.
Cambium disclaims all liability whatsoever, implied or express, for any risk of damage, loss or
reduction in system performance arising directly or indirectly out of the failure of the customer,
or anyone acting on the customer's behalf, to abide by the instructions, system parameters, or
recommendations made in this document.
Cross references
References to external publications are shown in italics. Other cross references, emphasized in
blue text in electronic versions, are active links to the references.
This document is divided into numbered chapters that are divided into sections. Sections are
not numbered, but are individually named at the top of each page, and are listed in the table of
contents.
Feedback
We appreciate feedback from the users of our documents. This includes feedback on the
structure, content, accuracy, or completeness of our documents. Send us feedback at
https://support.cambiumnetworks.com
Page 2
About This User Guide
Important regulatory information
Important regulatory information
Complying with rules for the country of operation
The PTP 670 product operates in frequency bands between 4.8 GHz and 5.9 GHz. These bands
are made available for licensed or unlicensed operation according to the individual rules and
regulations in force in each country.
Ensure that the equipment is operated in accordance with applicable regulations.
Obtain the necessary licenses or permits before using the equipment in licensed bands.
Some regional variants of PTP 670 are locked to a single country of operation. For the
remaining regional variants, use the Cambium Networks Support Centre to obtain a countryspecific license key for the country of operation. Country-specific license keys are automatically
populated with the list of regulatory bands allowed in that country.
In some regulatory bands, PTP 670 may be allowed as a secondary user of the band, where
operation is subject to the condition that the product does not cause interference to primary
users of the band. In this case, take care to avoid causing interference to primary users.
Radar avoidance
In countries where radar systems are the primary band users, the regulators have mandated
special requirements to protect these systems from interference caused by unlicensed devices.
Unlicensed devices must detect and avoid co-channel operation with radar systems.
The PTP 670 provides detect and avoid functionality for countries and frequency bands
requiring protection for radar systems.
Installers and users must meet all local regulatory requirements for radar detection. To meet
these requirements, users must install a license key for the correct country during
commissioning of the PTP 670. If this is not done, installers and users may be liable to civil and
criminal penalties.
Contact the Cambium helpdesk if more guidance is required.
USA specific information
Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference that may
cause undesired operation.
Page 3
About This User Guide
Important regulatory information
The USA Federal Communications Commission (FCC) requires manufacturers to implement
special features to prevent interference to weather radar systems that operate in the band 5600
MHz to 5650 MHz. These features must be implemented in all products able to operate
outdoors in the band 5470 MHz to 5725 MHz.
Manufacturers must ensure that such radio products cannot be configured to operate outside
of FCC rules; specifically it must not be possible to disable or modify the radar protection
functions that have been demonstrated to the FCC.
In order to comply with these FCC requirements, Cambium supplies variants of the PTP 670 for
operation in the USA. These variants are only allowed to operate with license keys that comply
with FCC rules.
Other variants of the PTP 670 are available for use in the rest of the world, but these variants
are not supplied to the USA except under strict controls, when they are needed for export and
deployment outside the USA.
Canada specific information
Caution
This device complies with Innovation, Science and Economic Development Canada’s
licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Innovation, Science and Economic Development Canada (ISEDC) requires manufacturers to
implement special features to prevent interference to weather radar systems that operate in the
band 5600 MHz to 5650 MHz. These features must be implemented in all products able to
operate outdoors in the band 5470 MHz to 5725 MHz.
Manufacturers must ensure that such radio products cannot be configured to operate outside
of ISEDC rules; specifically it must not be possible to disable or modify the radar protection
functions that have been demonstrated to ISEDC.
In order to comply with these ISEDC requirements, Cambium supplies variants of the PTP 670
for operation in Canada. These variants are only allowed to operate with license keys that
comply with ISEDC rules. In particular, operation of radio channels overlapping the band
5600 MHz to 5650 MHz is not allowed and these channels are permanently barred.
In addition, other channels may also need to be barred when operating close to weather radar
installations.
Other variants of the PTP 670 are available for use in the rest of the world, but these variants
are not supplied to Canada except under strict controls, when they are needed for export and
deployment outside Canada.
Page 4
About This User Guide
Important regulatory information
Renseignements specifiques au Canada
Attention
Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement
Economique Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Innovation, Sciences et Développement Economique Canada (ISDEC) a demandé aux
fabricants de mettre en œuvre des mécanismes spécifiques pour éviter d’interférer avec des
systèmes radar fonctionnant dans la bande 5600 MHz à 5650 MHz. Ces mécanismes doivent
être mis en œuvre dans tous les produits capables de fonctionner à l'extérieur dans la bande
5470 MHz à 5725 MHz.
Les fabricants doivent s'assurer que les produits de radiocommunications ne peuvent pas être
configurés pour fonctionner en dehors des règles ISDEC, en particulier, il ne doit pas être
possible de désactiver ou modifier les fonctions de protection des radars qui ont été démontrés
à ISDEC.
Afin de se conformer à ces exigences de ISEDC, Cambium fournit des variantes du PTP 670
exclusivement pour le Canada. Ces variantes ne permettent pas à l’équipement de fonctionner
en dehors des règles de ISDEC. En particulier, le fonctionnement des canaux de radio qui
chevauchent la bande 5600-5650 MHz est interdite et ces canaux sont définitivement exclus.
EU specific information
BE
BG
CZ
DK
DE
EE
IE
EL
ES
FR
HR
IT
CY
LV
LT
LU
HU
MT
NL
AT
PL
PT
RO
SI
SK
FI
SE
UK
PTP 670 can be configured to operate in lightly-licensed frequency bands and unlicensed
frequency bands that are permitted in individual countries but not harmonized within the EU.
Ensure that the equipment is operated in accordance with applicable regulations for the
country of operation. Obtain the necessary licenses or permits before using the equipment in
lightly-licensed bands.
EU Declaration of Conformity
Hereby, Cambium Networks declares that the Cambium PTP 670 Series Wireless Ethernet
Bridge complies with the essential requirements and other relevant provisions of Directive
1999/5/EC. The declaration of conformity may be consulted at:
http://www.cambiumnetworks.com/support/compliance/
Page 5
About This User Guide
Important regulatory information
Application firmware
Download the latest PTP 670 Series firmware and install it in the Outdoor Units (ODUs) before
deploying the PTP 670 equipment. Instructions for installing firmware are provided in
Upgrading software image on page 7-79.
Specific expertise and training for professional installers
To ensure that the PTP 670 is installed and configured in compliance with the requirements of
ISEDC and the FCC, installers must have the radio engineering skills and training described in
this section. This is particularly important when installing and configuring a PTP 670 system for
operation in the 5.1 GHz and 5.4 GHz UNII bands.
External antennas
When using a connectorized version of the product (as compared to the version with an
integrated antenna), the conducted transmit power may need to be reduced to ensure the
regulatory limit on transmitter EIRP is not exceeded. The installer must have an understanding
of how to compute the effective antenna gain from the actual antenna gain and the feeder
cable losses.
The range of permissible values for maximum antenna gain and feeder cable losses are
included in this user guide together with a sample calculation. The product GUI automatically
applies the correct conducted power limit to ensure that it is not possible for the installation to
exceed the EIRP limit, when the appropriate values for antenna gain and feeder cable losses
are entered into the GUI.
Antennas externes
Lorsque vous utilisez une version du produit sans antenne intégrée, il peut être nécessaire de
réduire la puissance d'émission pour garantir que la limite réglementaire de puissance isotrope
rayonnée équivalente (PIRE) n'est pas dépassée. L'installateur doit avoir une bonne
compréhension de la façon de calculer le gain de l'antenne de gain de l'antenne réelle et les
pertes dans les câbles de connections.
La plage de valeurs admissibles pour un gain maximal de l'antenne et des pertes de câbles de
connections sont inclus dans ce guide d'utilisation avec un exemple de calcul. L'interface
utilisateur du produit applique automatiquement la limite de puissance menée correct afin de
s'assurer qu'il ne soit pas possible pour l'installation de dépasser la limite PIRE, lorsque les
valeurs appropriées pour le gain d'antenne et les pertes de câbles d'alimentation sont entrées
dans l’interface utilisateur.
Ethernet networking skills
The installer must have the ability to configure IP addressing on a PC and to set up and control
products using a web browser interface.
Page 6
About This User Guide
Important regulatory information
Lightning protection
To protect outdoor radio installations from the impact of lightning strikes, the installer must be
familiar with the normal procedures for site selection, bonding and grounding. Installation
guidelines for the PTP 670 can be found in Chapter 2: System hardware and Chapter 5:
Installation.
Training
The installer needs to have basic competence in radio and IP network installation. The specific
requirements applicable to the PTP 670 should be gained by reading Chapter 5: Installation and
Chapter 6: Configuration and alignment and by performing sample set ups at base workshop
before live deployments.
Page 7
About This User Guide
Problems and warranty
Problems and warranty
Reporting problems
If any problems are encountered when installing or operating this equipment, follow this
procedure to investigate and report:
Search this document and the software release notes of supported releases.
Visit the support website.
Ask for assistance from the Cambium product supplier.
Gather information from affected units, such as any available diagnostic downloads.
Escalate the problem by emailing or telephoning support.
Repair and service
If unit failure is suspected, obtain details of the Return Material Authorization (RMA) process
from the support website.
Hardware warranty
Cambium’s standard hardware warranty is for one (1) year from date of shipment from
Cambium Networks or a Cambium distributor. Cambium Networks warrants that hardware will
conform to the relevant published specifications and will be free from material defects in
material and workmanship under normal use and service. Cambium shall within this time, at its
own option, either repair or replace the defective product within thirty (30) days of receipt of
the defective product. Repaired or replaced product will be subject to the original warranty
period but not less than thirty (30) days.
To register PTP products or activate warranties, visit the support website. For warranty
assistance, contact the reseller or distributor.
Caution
Using non-Cambium parts for repair could damage the equipment or void warranty.
Contact Cambium for service and repair instructions.
Portions of Cambium equipment may be damaged from exposure to electrostatic
discharge. Use precautions to prevent damage.
Page 8
About This User Guide
Security advice
Security advice
Cambium Networks systems and equipment provide security parameters that can be
configured by the operator based on their particular operating environment. Cambium
recommends setting and using these parameters following industry recognized security
practices. Security aspects to be considered are protecting the confidentiality, integrity, and
availability of information and assets. Assets include the ability to communicate, information
about the nature of the communications, and information about the parties involved.
In certain instances Cambium makes specific recommendations regarding security practices,
however the implementation of these recommendations and final responsibility for the security
of the system lies with the operator of the system.
Page 9
About This User Guide
Warnings, cautions, and notes
Warnings, cautions, and notes
The following describes how warnings and cautions are used in this document and in all
documents of the Cambium Networks document set.
Warnings
Warnings precede instructions that contain potentially hazardous situations. Warnings are used
to alert the reader to possible hazards that could cause loss of life or physical injury. A warning
has the following format:
Warning
Warning text and consequence for not following the instructions in the warning.
Cautions
Cautions precede instructions and are used when there is a possibility of damage to systems,
software, or individual items of equipment within a system. However, this damage presents no
danger to personnel. A caution has the following format:
Caution
Caution text and consequence for not following the instructions in the caution.
Notes
A note means that there is a possibility of an undesirable situation or provides additional
information to help the reader understand a topic or concept. A note has the following format:
Note
Note text.
Page 10
About This User Guide
Caring for the environment
Caring for the environment
The following information describes national or regional requirements for the disposal of
Cambium Networks supplied equipment and for the approved disposal of surplus packaging.
In EU countries
The following information is provided to enable regulatory compliance with the European
Union (EU) directives identified and any amendments made to these directives when using
Cambium equipment in EU countries.
Disposal of Cambium equipment
European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE)
Do not dispose of Cambium equipment in landfill sites. For disposal instructions, refer to
http://www.cambiumnetworks.com/support/weee-compliance
Disposal of surplus packaging
Do not dispose of surplus packaging in landfill sites. In the EU, it is the individual recipient’s
responsibility to ensure that packaging materials are collected and recycled according to the
requirements of EU environmental law.
In non-EU countries
In non-EU countries, dispose of Cambium equipment and all surplus packaging in accordance
with national and regional regulations.
Page 11
Chapter 1: Product description
This chapter provides a high level description of products in the PTP 670 series. It describes in
general terms the function of the product, the main product variants and the main hardware
components. The following topics are described in this chapter:
•
Overview of the PTP 670 Series on page 1-2 introduces the key features, typical uses,
product variants and components of the PTP 670 series.
•
Wireless operation on page 1-7 describes how the PTP 670 wireless link is operated,
including modulation modes, power control and spectrum management.
•
Ethernet bridging on page 1-30 describes how the PTP 670 controls Ethernet data, in both
the customer data and system management networks.
•
TDM bridging on page 1-43 describes how TDM traffic (E1 or T1) may be carried over PTP
670 links.
•
System management on page 1-46 introduces the PTP 670 management system, including
the web interface, installation, configuration, security, alerts and upgrades.
Page 1-1
Chapter 1: Product description
Overview of the PTP 670 Series
Overview of the PTP 670 Series
This section introduces the key features, typical uses, product variants and components of the
PTP 670 series.
Purpose
Cambium PTP 670 Series Bridge products are designed for Ethernet bridging over point-topoint (PTP) and high-capacity multipoint (HCMP) microwave links in licensed, unlicensed and
lightly-licensed frequency bands between 4800 MHz and 6050 MHz. Users must ensure that the
PTP 670 Series complies with local operating regulations.
The PTP 670 Series acts as a transparent bridge between two segments of the operator’s
network. In this sense, it can be treated as a virtual wired connection between two points. The
PTP 670 Series forwards 802.3 Ethernet frames destined for the other part of the network and
filters frames it does not need to forward. The system is transparent to higher-level protocols
such as VLANs and Spanning Tree.
Key features
The PTP 670 is a high performance wireless bridge for Ethernet traffic with a maximum
throughput of 450 Mbps. It is capable of operating in line-of-sight (LOS), near-LOS and nonLOS propagation condition. Its maximum LOS range is 250 km. The PTP 670 operates in
licensed, unlicensed and lightly-licensed frequency bands between 4800 MHz and 6050 MHz. It
has a very high spectral efficiency of 10 bps/Hz and supports a channel bandwidth of up to
45 MHz. The PTP 670 Integrated ODU has its own flat plate antenna with antenna gain 23 dBi.
The PTP 670 Connectorized ODU is designed for use with an external antenna.
The wireless link uses Time Division Duplex (TDD) and supports both symmetric and
asymmetric TDD configurations.
PTP 670 operates in two distinct wireless topologies: point-to-point (PTP) and high-capacity
multipoint (HCMP). A PTP link consists of one outdoor unit (ODU) configured as a Master and
one ODU configured as a Slave. An HCMP sector consists of one ODU configured as a Master
and up to eight ODUs configured as Slaves.
From an Ethernet point-of-view, the PTP 670 wireless link is a transparent Layer 2 bridge. It
supports up to three Gigabit Ethernet ports. Two ports support twisted pair Gigabit Ethernet.
One of them is capable of providing power via standard 802.3at PoE to an external device such
as a video surveillance camera or a wireless access point. The third port accepts either a
twisted pair or fibre GE SFP module.
The PTP 670 Series supports an optional TDM adaptor that allows E1 or T1 telecoms circuits to
be bridged over the wireless link.
The PTP 670 Series has extensive quality of service (QoS) classification capability and supports
up to eight levels of queues. Management of the unit may be via the same interface as the
bridged traffic (in-band management) or on a separate port (out-of-band local or remote
management).
Page 1-2
Chapter 1: Product description
Overview of the PTP 670 Series
PTP 670 supports both synchronous Ethernet and operation as an IEEE 1588-2008 transparent
clock.
Table 1 gives a summary of the main PTP 670 characteristics.
Table 1 Main characteristics of the PTP 670 Series
Characteristic
Value
Topology
PTP, HCMP.
Wireless link condition
LOS, near LOS or non-LOS
Range
Up to 250 km
Duplexing
TDD (symmetric and asymmetric)
Connectivity
Ethernet
Synchronous Ethernet
ITU-T G.8262/Y.1362 EEC-Option 1 and EEC-Option 2
Transparent clock
IEEE 1588-2008 compliant
Operating frequencies
4800 MHz to 5875 MHz (4.8 to 5.9 GHz frequency variant)
4900 MHz to 6050 MHz (4.9 to 6.05 GHz frequency variant)
Channel bandwidth
5, 10, 15, 20, 30, 40 or 45 MHz
High spectral efficiency
Up to 10 bps/Hz
Data rate
Up to 450 Mbps (45 MHz channel BW)
Telecommunications (TDM)
Up to eight E1 or T1 circuits (NIDU required)
Frequency bands
The PTP 670 ODU can be configured by the user to operate in the following bands:
•
4.8 GHz band: 4800 MHz to 4900 MHz
•
4.9 GHz band: 4940 MHz to 4990 MHz
•
5.1 GHz band: 5150 MHz to 5250 MHz
•
5.2 GHz band: 5250 MHz to 5350 MHz
•
5.4 GHz band: 5470 MHz to 5725 MHz
•
5.8 GHz band: 5725 MHz to 5875 MHz
•
5.9 GHz band: 5825 MHz to 6050 MHz
The PTP 670 frequency variants support the following bands:
Table 2 PTP 670 support for frequency bands
Frequency variant
4.8 GHz
4.9 GHz
5.1 GHz
5.2 GHz
5.4 GHz
5.8 GHz
5.9 GHz
4.8 to 5.9 GHz
Yes
Yes
Yes
Yes
Yes
Yes
4.9 to 6.05 GHz
Yes
Yes
Yes
Yes
Yes
Yes
Page 1-3
Chapter 1: Product description
Overview of the PTP 670 Series
Note
The supported frequency coverage may be further restricted in some country licenses to
comply with the applicable regulations.
Typical bridge deployment
The PTP 670 is an “all outdoor” solution consisting of a wireless bridge between two sites.
Each site installation consists of a PTP 670 Integrated or PTP 670 Connectorized outdoor unit
(ODU), and a power injector (PSU) (Figure 1). The ODU provides the following interfaces:
•
PSU port: This provides proprietary power over Ethernet and connection to the
management and/or data networks via 100BASE-TX or 1000BASE-T Ethernet. In the basic
configuration, this is the only Ethernet connection to the ODU.
•
SFP port: This provides an optical or copper Gigabit Ethernet interface for customer data
and/or network management.
•
Aux port: This provides an optional power and 100BASE-TX or 1000BASE-T Ethernet
connection to an IEEE803.2at device such as a video camera or wireless access point.
Figure 1 PTP 670 typical bridge deployment
Building 1
Building 2
Auxiliary
equipment
Ethernet interface
(with optional
power) to auxiliary
device
ODU
Optical or copper SFP
Ethernet interface to
connected device
(not powered)
ODU
Power over Ethernet
interface
Lightning
protection units
Out-of-band
local
management
PSU
PSU
AC supply
AC supply
Network
equipment
Network
equipment
Page 1-4
Chapter 1: Product description
Overview of the PTP 670 Series
Hardware overview
The main hardware components of the PTP 670 are as follows:
•
Outdoor unit (ODU): The ODU is a self-contained transceiver unit that houses both radio
and networking electronics. The PTP 670 ODU is supplied in two configurations:
•
4.8 to 5.9 GHz
4.9 to 6.05 GHz
The ODU is supplied in the following regional variants:
•
A PTP 670 Connectorized ODU intended to work with separately mounted external
antennas.
The ODU is supplied in the following frequency variants:
•
A PTP 670 Integrated ODU attached to a 23 dBi flat plate antenna
FCC, intended for deployment in the USA
European Union (EU), intended for deployment in countries of the European Union or
other countries following ETSI regulations
IC, intended for deployment in Canada under the rules of ISEDC.
Mexico, intended for use in Mexico
RoW, intended for deployment in countries other than USA, Canada and EU countries.
Power supply unit (PSU): PTP 670 provides three options for PSUs:
The AC Power Injector 56V is suitable for powering a single ODU without an auxiliary
device. The AC Power Injector 56V is not approved for use with the 4.8 GHz to 5.9 GHz
frequency variants of PTP 670.
The AC+DC Power Injector 56V is required when powering a single PTP 670 ODU from
a DC supply, when powering an auxiliary device, when using PTP-SYNC, or when the
PSU is needed to operate at extreme temperatures.
The Cluster Management Module (CMM5) is a modular system consisting of power
injectors, power supplies, a controller and a GPS receiver. Each Power and Sync
Injector can power up to four ODUs. CMM5 also distributes a synchronization signal
from a Universal GPS (UGPS) receiver to the ODUs.
•
Antennas and antenna cabling: Connectorized ODUs require external antennas connected
using RF cable.
•
PTP SYNC unit (optional): The PTP SYNC unit can be used with the AC+DC Enhanced
Power Injector 56V to provide TDD synchronization at a TDD Master ODU. PTP-SYNC must
be used with the AC+DC Enhanced Power Injector 56V.
•
GPS receivers: PTP 670 supports two different GPS receivers for network-wide TDD
synchronization. The Trimble Acutime™GG GPS receiver is used with PTP-SYNC. The
Universal GPS (UGPS) receiver is used with CMM5.
•
Network Indoor Unit (NIDU) (optional): The NIDU allows up to eight TDM channels (E1 or
T1) to be bridged over a PTP 670 link.
•
Ethernet cabling: All configurations require a copper Ethernet Cat5e connection from the
ODU (PSU port) to the PSU. Advanced configurations may also require one or both of the
following:
A copper or optical Ethernet connection from the ODU (SFP port) to network
terminating equipment or another device.
Page 1-5
Chapter 1: Product description
Overview of the PTP 670 Series
A copper Ethernet Cat5e connection from the ODU (Aux port) to an auxiliary device.
•
Lightning protection unit (LPU): LPUs are installed in the PSU and Aux copper drop cables
to provide transient voltage surge suppression.
•
Ground cables: ODU, LPUs and outdoor copper Ethernet cables are bonded to the site
grounding system using ground cables.
For more information about these components, including interfaces, specifications and
Cambium part numbers, refer to Chapter 2: System hardware.
Page 1-6
Chapter 1: Product description
Wireless operation
Wireless operation
This section describes how the PTP 670 wireless link is operated, including topology,
modulation modes, power control and security.
Wireless topology
PTP 670 supports operation in two distinct topologies:
•
Point to point (PTP)
•
High-capacity multipoint (HCMP)
PTP topology
The PTP topology provides Ethernet bridging over a point-to-point wireless link consisting of
one outdoor unit (ODU) configured as a TDD Master and one ODU configured as a TDD Slave.
The PTP topology supports the following features:
•
Range: Up to 250 km
•
Operating frequencies: 4800 MHz to 5875 MHz, 4900 MHz to 6050 MHz
•
Channel bandwidth: 5 MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz, 40 MHz, 45 MHz
•
TDD ratio: 1:5, 1:3, 1:2, 1:1, 2:1, 3:1, 5:1, adaptive
•
Link optimization: IP or TDM
•
TDD synchronization using PTP-SYNC
•
Spectral efficiency: Up to 10 bps/Hz
•
Aggregate data capacity: Up to 450 Mbps
•
Out-of-band management
•
Synchronous Ethernet
•
IEEE 1588 Transparent Clock
•
TDM: Eight T1/E1 circuits using the Network Indoor Unit (NIDU)
HCMP topology
The optional HCMP topology provides Ethernet bridging over a star of individual point-to-point
wireless links connecting one ODU configured as a TDD Master with up to eight ODUs
configured as TDD Slaves. Each of the individual wireless links is connection-oriented and
operates in a dedicated time slot of the TDD frame. The capacity of the sector is shared
between the individual links, but apart from this each of the links has efficiency and
performance similar to links provided in the PTP topology.
The Master ODU will normally be installed with a connectorized sector or omni-directional
antenna. Slave ODUs will normally be installed with an integrated or connectorized directional
antenna.
Page 1-7
Chapter 1: Product description
Wireless operation
The Master ODU includes an Ethernet bridging function with address learning to forward
Ethernet data traffic via a wireless link to the appropriate Slave, based on the destination
address of the end-station reached through the Slave. Traffic with broadcast or unknown
unicast destination address is duplicated in the Master and forwarded on each of the links
separately.
The star of wireless links and the Ethernet bridging function in the Master together provide
LAN-like connectivity between the wired ports at up to nine ODUs. Data traffic forwarded from
a wired port on one Slave to a wired port on a different Slave is delivered via the Master ODU
and thus consumes wireless capacity in two different time slots.
The HCMP topology supports the following features:
•
Operating frequencies: 4800 MHz to 5875 MHz, 4900 MHz to 6050 MHz
•
Channel bandwidth: 20 MHz or 40 MHz
•
Range: Up to 40 km
•
Number of Slaves:
20 MHz: Up to four
40 MHz: Up to eight
•
Link symmetry: 4:1, 3:1, 2:1, 1:1, 1:2, 1:3, 1:4, depending on bandwidth and number of
Slaves
•
Link optimization: IP
•
TDD synchronization using PTP-SYNC
•
Spectral efficiency: Up to 8.3 bps/Hz
•
Aggregate data capacity: Up to 338 Mbit/s
Synchronous Ethernet, IEEE 1588 Transparent Clock and TDM are not supported for the HCMP
topology in this release, but may be added in later releases.
Further reading
For information about…
Refer to…
Wireless encryption in HCMP topology
Wireless encryption on page 1-21
Capability upgrades for HCMP
Capability upgrades on page 1-60
Configuring encryption in HCMP
Wireless encryption on page 1-21
Configuring the Whitelist
Authorization Control page on page 6-63
Time division duplexing in PTP wireless topology
TDD cycle
PTP 670 links operate using Time Division Duplexing (TDD). They use a TDD cycle in which the
ODUs alternately transmit and receive TDD bursts. The TDD cycle is illustrated in Figure 2. The
steps in the cycle are as follows:
The TDD master transmits a burst to the TDD slave.
A delay occurs as the master-slave burst propagates over the link.
Page 1-8
Chapter 1: Product description
Wireless operation
The slave receives the burst from the master.
The slave processes the master-slave burst.
The slave transmits a burst to the master.
A delay occurs as the slave-master burst propagates over the link.
The master receives the burst from the slave.
The master transmits the next burst to the slave.
The frame duration must be long enough to allow the master to receive the complete burst in 7
before starting to transmit in 8.
TDD frame parameters
The TDD burst duration varies depending on the following:
•
Channel bandwidth
•
Link range
•
Link optimization mode
•
Link symmetry
•
Offered traffic loading.
The TDD frame duration varies depending on the following:
•
TDD burst duration master-slave.
•
TDD burst duration slave-master.
•
Link range.
The propagation delay in Step 2 is necessarily equal to the propagation delay in Step 6, and is
determined solely by the link range. There may be added delays between rx and tx on the
master and slave to minimize interference, as set up by the link planner or installer.
Page 1-9
Chapter 1: Product description
Wireless operation
Figure 2 TDD cycle
Channel selection
The PTP 670 series links are capable of transmitting and receiving on the same channel or on
different channels. In other words, the slave-master direction may use a different channel from
the master-slave direction. Independent selection of transmit and receive frequencies can be
useful in planned networks or for countering interference.
When links operate in radar avoidance regions, each unit monitors its transmit channel for the
presence of radar signals. Therefore, transmit and receive channels are always identical.
Time division duplexing in HCMP wireless topology
TDD cycle
The TDD cycle in HCMP operation is similar to the equivalent case for the PTP topology, except
that the individual wireless links are accommodated in separate time slots within the TDD
frame.
Page 1-10
Chapter 1: Product description
Wireless operation
The TDD cycle for a simple HCMP sector with two Slave ODUs is illustrated in Figure 3. The
steps in the cycle are as follows:
The TDD Master transmits a burst to the first TDD Slave.
A delay occurs as the Master-Slave burst propagates over the link.
The first Slave receives the burst from the Master.
The first Slave processes the Master-slave burst.
The first Slave transmits a burst to the Master.
A delay occurs as the Slave-Master burst propagates over the link.
The Master receives the burst from the first Slave.
The Master transmits a burst to the second TDD Slave. A similar set of steps leads to:
The Master receives the burst from the second Slave.
10 The Master transmits the next burst to the first Slave.
Sectors configured for more than two Slaves necessarily have extended frame duration to
accommodate additional Master-Slave and Slave-Master transmissions.
TDD frame parameters
In the HCMP topology, the TDD burst duration is fixed.
The TDD frame duration varies depending on the following:
•
Maximum number of Slaves
•
Maximum link range.
The propagation delay in Step 2 is necessarily equal to the propagation delay in Step 6, and is
determined solely by the link range. The propagation delay for the second Slave will be
different from the delay for the first Slave unless the two Slaves are at exactly the same range.
Page 1-11
Chapter 1: Product description
Wireless operation
Figure 3 TDD cycle for HCMP
TDD frame
Frame duration
Burst
Burst duration
10
Master transmits
Propagation delay 1
Slave 1 receives
Slave Receive to
Transmit delay
Slave 1 transmits
Propagation delay 2
Slave 2 receives
Slave Receive to
Transmit delay
Slave 2 transmits
Propagation delay
Master receives
Channel selection
In the HCMP topology, the ODUs in a sector all transmit and receive on a common channel.
Further reading
For information about…
Refer to…
TDD synchronization in PTP and HCMP
networks
TDD synchronization on page 1-26
Link mode optimization
Link mode optimization allows the PTP 670 link to be optimized according to the type of traffic
that will be bridged. The link supports two modes, IP Traffic and TDM Traffic.
Page 1-12
Chapter 1: Product description
Wireless operation
IP link optimization in the PTP topology
The IP link optimization mode provides the maximum possible link capacity. IP mode is an
appropriate choice where applications in the bridged networks provide some measure of
reliable transmission, and where very low latency is not critical. IP mode supports both fixed
and adaptive link symmetry.
TDM link optimization in the PTP topology
The TDM link optimization mode provides the lowest possible latency. TDM mode additionally
implements a more conservative approach to adaptive modulation, leading to lower error rates
in fading channels at the expense of slightly lower link capacity. TDM mode is an appropriate
choice for delay intolerant data without reliable transmission (for example voice over IP data).
TDM Traffic mode is selected automatically when TDM interfaces are enabled.
Link optimization in the HCMP topology
The HCMP topology supports only IP link optimization.
Further reading
For information about…
Refer to…
Effect of IP and TDM modes on link symmetry
Link symmetry on page 1-13
Effect of IP and TDM modes on link data
throughput capacity
Calculating data rate capacity on page 3-26
Effect of IP and TDM modes on system
threshold, output power and link loss
System threshold, output power and link loss
on page 3-65
How to configure link mode optimization
Wireless Configuration page on page 6-25
Link mode optimization alarms
Alarms on page 7-20
Data throughput capacity tables on page 3-86
Link symmetry
PTP topology
The PTP 670 series provides eight configuration options for apportioning the available capacity
between the two link directions.
•
Symmetric – The Master and Slave have equal capacity. The PTP 670 series achieves this
by allocating an equal Burst Duration for the Master and the Slave.
•
5:1 – The capacity in the direction Master to Slave is five times that of the direction Slave to
Master. The PTP 670 series achieves this by setting the Burst Duration of the Master to five
times that of the Slave
•
3:1 – The capacity in the direction Master to Slave is three times that of the direction Slave
to Master. The PTP 670 series achieves this by setting the Burst Duration of the Master to
three times that of the Slave.
Page 1-13
Chapter 1: Product description
Wireless operation
•
2:1 – The capacity in the direction Master to Slave is twice that of the direction Slave to
Master. The PTP 670 series achieves this by setting the Burst Duration of the Master to
twice that of the Slave.
•
1:2 – The capacity in the direction Slave to Master is twice that of the direction Master to
Slave. The PTP 670 series achieves this by setting the Burst Duration of the Slave to twice
that of the Master.
•
1:3 – The capacity in the direction Slave to Master is three times that of the direction Master
to Slave. The PTP 670 series achieves this by setting the Burst Duration of the Slave to
three times that of the Master.
•
1:5 – The capacity in the direction Slave to Master is five times that of the direction Master
to Slave. The PTP 670 series achieves this by setting the Burst Duration of the Slave to five
times that of the Master.
•
Adaptive – The capacity allocated to a given link direction is dependent on the offered level
of network traffic in both link directions. If the level of offered traffic in both directions is
equally high or equally low, the PTP 670 will allocate equal capacity to both directions. If
however the offered level of traffic is greater in one direction, it is allocated a greater
proportion of the overall link capacity. The PTP 670 series achieves this by increasing (or
decreasing) the duration of the Transmit Burst in a given link direction as the offered level
of network traffic increases (or decreases) in this same direction. This is done
independently for the two directions.
Note
The 5:1, 3:1, 2:1, 1:2, 1:3 and 1:5 modes are not available when TDD synchronization is
enabled, or when TDM services are enabled.
Note
Adaptive mode is not available in the following configurations:
•
When link mode optimization is set to TDM Traffic (see Link mode optimization on
page 1-12.
•
When TDD synchronization is enabled.
•
In regions where radar avoidance is operational (see Radar avoidance on page 1-19).
HCMP topology
The PTP 670 series provides seven configuration options for apportioning the available
capacity between the two link directions.
•
4:1 – The capacity in the downlink (Master to Slave) direction is four times that of the uplink
(Slave to Master) direction.
•
3:1 – The capacity in the downlink direction is three times that of the uplink direction.
•
2:1 – The capacity in the downlink direction is twice the uplink direction.
•
1:1 – Uplink and downlink capacity is equal.
•
1:2 – The capacity in the uplink direction is twice the downlink direction.
•
1:3 – The capacity in the uplink direction is three times that of the downlink direction.
•
1:4 – The capacity in the uplink direction is four times that of the downlink direction.
Page 1-14
Chapter 1: Product description
Wireless operation
The asymmetric options are available independent of TDD Synchronization.
The available Link Symmetry options in HCMP topology depend on Channel Bandwidth and
the number of Slaves, as shown in Table 3.
Table 3 Link symmetry options in HCMP
Channel Bandwidth
Number of slaves
Supported Link Symmetry options
20 MHz
Two
3:1, 2:1, 1:1, 1:2, 1:3
Three
2:1, 1:1, 1:2
Four
1:1
Two, Three
4:1, 3:1, 2:1, 1:1, 1:2, 1:3, 1:4
Four
3:1, 2:1, 1:1, 1:2, 1:3
Five, Six
2:1, 1:1, 1:2
Seven, Eight
1:1
40 MHz
Further reading
For information about…
Refer to…
Link symmetry in synchronized networks
TDD synchronization on page 1-26
Effect of link symmetry on link data throughput
capacity
Calculating data rate capacity on page 3-26
How to configure link symmetry
Wireless Configuration page on page 6-25
Data throughput capacity tables on page 3-86
OFDM and channel bandwidth
The PTP 670 series transmits using Orthogonal Frequency Division Multiplexing (OFDM). This
wideband signal consists of many equally spaced sub-carriers. Although each sub carrier is
modulated at a low rate using conventional modulation schemes, the resultant data rate from
the sub-carriers is high. OFDM works exceptionally over a Non-Line-of-Sight (NLoS) channel.
The channel bandwidth of the OFDM signal is configurable to one of the following values: 5,
10, 15, 20, 30, 40 and 45 MHz. Higher bandwidths provide greater link capacity at the expense
of using more bandwidth. Systems configured for a narrower channel bandwidth provide
better receiver sensitivity and can also be an appropriate choice in deployments where the
amount of free spectrum is limited.
Each channel is offset in center frequency from its neighboring channel by 10 or 5 MHz.
Note
The Channel Bandwidth must be configured to the same value at both ends of the link.
Not all channel bandwidths are available in all regulatory bands.
Page 1-15
Chapter 1: Product description
Wireless operation
Further reading
For information about…
Refer to…
Channel bandwidths per frequency band
General wireless specifications on page 3-20
How to plan for channel bandwidth
Channel bandwidth on page 3-22
Effect of channel bandwidth on link data
throughput capacity
Calculating data rate capacity on page 3-26
How to configure channel bandwidth
Wireless Configuration page on page 6-25
How to monitor channel bandwidth
Spectrum Management on page 7-29
Data throughput capacity tables on page 3-86
Spectrum management
The spectrum management feature of the PTP 670 Series monitors the available wireless
spectrum and directs both ends of the wireless link to operate on a channel with a minimum
level of co-channel and adjacent channel interference.
Spectrum management measurements
The PTP 670 Series performs two mean signal measurements per TDD cycle, per channel. This
mean measurement represents the mean received signal power for the 40 microsecond
measurement period.
The Spectrum Management algorithm collects measurements equally from all channels in the
operating band. This process is called the Channel Availability Check (CAC). The CAC uses a
round-robin channel selection process to collect an equal amount of measurements from each
channel. The CAC measurement process is not altered by the channel barring process.
Measurements are still collected for all channels irrespective of the number of barred channels.
Measurement analysis
Spectrum Management uses statistical analysis to process the received peak and mean
measurement. The statistical analysis is based on a fixed, one minute, measurement
quantization period. Spectrum Management collects data for the specified quantization period
and only at the end of the period is the statistical analysis performed.
Statistical summary
The display of statistical measurement on the Spectrum Expert and Spectrum Management
pages always shows a statistical summary of all channel measurement. The mean and
percentile values displayed for each channel are calculated over a 20 minute statistics window
period. All channel decisions are made using the values computed over the statistics window
period.
Page 1-16
Chapter 1: Product description
Wireless operation
Spectrum management in fixed frequency mode
The transmit and receive frequencies can be fixed in a PTP 670 wireless link. Once fixed
frequency mode is configured, the spectrum management software will not attempt to move
the wireless link to a channel with lower co-channel and adjacent-channel interference.
Therefore this mode of operation is only recommended for deployments where the installer
has a good understanding of the prevailing interference environment. Care must also be taken
to ensure that the frequency allocations at each end of the link are compatible.
Fixed frequency mode is not available in regions where radar detection is required by the
regulations.
Further reading
For information about…
Refer to…
How to perform spectrum management
Spectrum Management on page 7-29
Adaptive modulation
The PTP 670 series can transport data over the wireless link using a number of different
modulation modes ranging from 256QAM 0.81 to BPSK 0.63. For a given channel bandwidth
and TDD frame structure, each modulation mode transports data at a fixed rate. Also, the
receiver requires a minimum signal to noise ratio in order to successfully demodulate a given
modulation mode. Although the more complex modulations such as 256QAM 0.81 will
transport data at a much higher rate than the less complex modulation modes, the receiver
requires a much higher signal to noise ratio.
The PTP 670 series provides an adaptive modulation scheme where the receiver constantly
monitors the quality of the received signal and notifies the far end of the link of the optimum
modulation mode with which to transmit. In this way, optimum capacity is achieved at all
times. This is one of a number of features which allows the PTP 670 to operate in challenging
non-line of sight radio channels.
Note
LINKPlanner includes an estimate of mean data rate, the data rate provided by each
modulation and the percentage of time spent in each modulation mode.
Further reading
For information about…
Refer to…
Lowest data modulation mode
Lowest Data Modulation Mode on page 1-33
Lowest TDM modulation mode
Lowest TDM modulation mode on page 1-44
Planning for adaptive modulation
Adaptive modulation on page 3-25
Effect of modulation mode on link data
throughput capacity
Calculating data rate capacity on page 3-26
Data throughput capacity tables on page 3-86
Page 1-17
Chapter 1: Product description
Wireless operation
For information about…
Refer to…
Effect of modulation mode on system
threshold, output power and link loss
System threshold, output power and link loss on
page 3-65
How to configure modulation modes
Interface Configuration page on page 6-16
Wireless Configuration page on page 6-25
System Configuration page on page 6-39
Modulation mode when the ODU is armed
Checking that the units are armed on page 6-118
How to view the transmit and receive
modulation modes
System Status page on page 7-3
System counters (PTP topology) on page 7-57
MIMO
Multiple-Input Multiple-Output (MIMO) techniques provide protection against fading and
increase the probability that the receiver will decode a usable signal. When the effects of MIMO
are combined with those of OFDM techniques and a high link budget, there is a high
probability of a robust connection over a non-line-of-sight path.
The PTP 670 transmits two signals on the same radio frequency, one of which is vertically
polarized and the other horizontally polarized. Depending on the channel conditions, the PTP
670 will adapt between two modes of operation:
•
Dual Payload: When the radio channel conditions allow, the PTP 670 will transmit two
different and parallel data streams, one on the vertical channel and one on the horizontal
channel. This doubles the capacity of the PTP 670.
•
Single Payload: As the radio channel becomes more challenging, the PTP 670 has the
ability to detect this and switch to a mode which transmits the same data stream on both
vertical and horizontal channels. This provides polar diversity and is another key feature
which allows the PTP 670 to operate in challenging non- line of sight radio channels.
Lower order modulations (BPSK 0.63 up to QPSK 0.87) only operate in single payload mode.
Higher order modulations (16QAM 0.63 to 256QAM 0.81) are available in single payload mode
and dual payload mode. The switching between modes is automatically controlled by the
adaptive modulation feature described in Adaptive modulation on page 1-17.
Note
The system automatically chooses between dual and single payload to try to increase
the capacity of a link. However the user can disable the dual payload mode, forcing
the more robust option of single payload.
Further reading
For information about…
Refer to…
How to configure dual or single payload
Wireless Configuration page on page 6-25
Page 1-18
Chapter 1: Product description
Wireless operation
For information about…
Refer to…
Single and dual payload modulation modes
System threshold, output power and link loss
on page 3-65
TDM single payload lock feature
TDM on page 7-15
Dynamic spectrum optimization
The PTP 670 series uses an interference mitigation technique known as Dynamic Spectrum
Optimization (DSO). Both the Master and Slave continually monitor for interference on all
channels and then select the best frequency of operation. This is a dynamic process where the
PTP 670 can continually move channels in response to changes in interference. Two modes of
operation are available:
•
First mode: the two link directions are forced to select the same frequency, determined by
the Master.
•
Second mode: the frequency of operation can be determined independently for each
direction. This mode is not permitted in radar regions.
Note
PTP 670 does not support Dynamic Spectrum Optimization in the HCMP topology.
Further reading
For information about…
Refer to…
Using DSO in PTP networks
Using Dynamic Spectrum Optimization on page 1-25
Planning to use DSO
Frequency selection on page 3-22
How to configure DSO
Wireless Configuration page on page 6-25
Asymmetric DSO in non-radar regions
Spectrum Management Settings on page 7-35
Radar avoidance
In regions where protection of radars is part of the local regulations, the PTP 670 must detect
interference from radar-like systems and avoid co-channel operation with these systems.
To meet this requirement, the PTP 670 implements the following features:
•
The radar detection algorithm will always scan a usable channel for 60 seconds for radar
interference before making the channel an available channel.
•
This compulsory channel scan will mean that there is at least 60 seconds service outage
every time radar is detected and that the installation time is extended by at least 60
seconds even if no radar is found.
Page 1-19
Chapter 1: Product description
Wireless operation
•
When operating on a channel, the spectrum management algorithm implements a radar
detection function which looks for impulsive interference on the operating channel. If
impulsive interference is detected, spectrum management will mark the current operating
channel as having detected radar (unavailable channel) and initiate a channel hop to an
available channel. The previous operating channel will remain in the unavailable state for
thirty minutes after the impulsive interference pulse was detected.
•
After the thirty minutes have expired the channel will be returned to the usable channel
pool.
There is a secondary requirement for bands requiring radar avoidance. Regulators have
mandated that products provide a uniform loading of the spectrum across all devices. In
general, this prevents operation with fixed frequency allocations. However:
•
ETSI regulations do allow frequency planning of networks (as that has the same effect of
spreading the load across the spectrum).
•
The FCC does allow channels to be barred if there is actually interference on them.
Fixed frequency allocation is not recommended in radar avoidance regions, as any radar
detection would cause a system outage of at least 30 minutes.
Note
PTP 670 does not support Radar Avoidance in the HCMP topology.
Further reading
For information about…
Refer to…
Radar avoidance in the country of operation
License keys and regulatory bands on page 1-24
Planning for mandatory radar detection
Frequency selection on page 3-22
Radar avoidance when aligning antennas
ODU installation tones on page 6-121
Effect of radar detection on spectrum
management
Spectrum Expert page in radar avoidance mode
on page 7-41
Access method
PTP topology
PTP 670 provides protection against accidentally establishing a PTP link to the wrong remote
unit using a choice of three different access methods:
•
Link Access: The MAC address of the remote unit must match the configured Target MAC
Addess.
•
Link Name Access: The Link Name of the remote unit must match the configured Link
Name.
•
Group Access: The Group ID of the remote unit must match the configured Group ID.
Page 1-20
Chapter 1: Product description
Wireless operation
HCMP topology
In the HCMP wireless topology, PTP 670 always uses the Group Access method. The Master
and Slave ODUs must all share the same Group ID.
Note
The configured Access Method provides effective protection against an accidental
attempt to form a link with the wrong remote unit. Use wireless encryption to protect
against a malicious attempt to connect an unauthorized ODU to the wireless network.
Further reading
For information about…
Refer to…
General description of Wireless encryption
Wireless encryption on page 1-21
Configuring Access Method
Wireless Configuration page on page 6-25
Configuring Target MAC Address
Wireless Configuration page on page 6-25
Authorization Control page
Authorization Control page on page 6-63
Wireless encryption
The PTP 670 supports optional encryption for data transmitted over the wireless link using a
choice of three different encryption algorithms:
•
TLS RSA: The ODUs exchange RSA certificates to authorize the remote unit and agree a
randomly-generated master secret. The TLS RSA option supports unencrypted operation of
the wireless link, or encryption with 128-bit or 256-bit AES.
•
TLS PSK 128-bit: Both ends of the link are configured with the same 128-bit pre-shared key
as a master secret. The wireless link is encrypted using 128-bit AES.
•
TLS PSK 256-bit: Both ends of the link are configured with the same 256-bit pre-shared key
as a master secret. The wireless link is encrypted using 256-bit AES.
The Advanced Encryption Standard (AES) is a symmetric encryption algorithm approved by
U.S. Government organizations (and others) to protect sensitive information. The AES
implementation in PTP 670 is approved to FIPS 197.
The use of AES encryption in PTP 670 is controlled by the AES license and enabled through the
purchase of a capability upgrade.
Note
Encryption Algorithm cannot be configured as TLS RSA when Access Method is Link
Name Access. In this case, only the TLS PSK algorithms are supported.
Page 1-21
Chapter 1: Product description
Wireless operation
TLS RSA
Wireless Encryption TLS RSA can be used with the following Access Methods:
•
Link Access
•
Group Access
Access Method is automatically configured to Group Access in the HCMP topology.
Authentication using TLS RSA
TLS RSA uses the bidirectional exchange and verification of RSA device certificates to
determine the authentic identity of both ODUs. The ODU will not form a wireless link if the
encryption algorithm is TLS RSA and the certificate of the remote unit cannot be verified.
PTP 670 can be configured to use factory-installed device certificates, or user-supplied device
certificates. Both ends of the link must use the same certificate type.
User-supplied device certificates must be RSA certificates with key size of 2048 bits and SHA256, where the subject of the certificate is the MAC address of the ODU. For user-supplied
certificates, each ODU must be additionally configured with a self-signed Root CA certificate
that validates the device certificate of the remote ODU.
User-supplied device certificates are zeroized along with the other Critical Security Parameters
(CSPs). Factory-installed certificates are in permanent memory and are never zeroized.
Authorization using TLS RSA with Link Access
When PTP 670 is configured for Wireless Encryption of TLS RSA and Access Method of Link
Access, the ODU will not connect unless the authenticated MAC address of the remote ODU is
equal to the configured Target MAC Address attribute. The Target MAC Address authorizes the
remote ODU.
Authorization using TLS RSA with Group Access
When PTP 670 is configured for Wireless Encryption of TLS RSA and Access Method of Group
Access, two options are available for authorizing the remote ODU. With the Whitelist option,
the ODU will connect only if the authenticated MAC address of the remote unit has previously
been added to a list of authorized ODUs. With the Blacklist option, the ODU will always connect
unless the authenticated MAC address has previousy been added to a list of unauthorized
ODUs. The Whitelist and Blacklist cannot be used at the same time. The selection of Whitelist
and Blacklist is independent of the selection of Factory or User-provided certificates.
The default Blacklist/Factory combination offers limited benefits in a deployed network, since it
is impossible to add all PTP 670 ODUs with Factory certificates to the Blacklist. However, this
combination does provide a relatively simple way to build a network with the minimum of
configuration, in applications where security is not an immediate priority, for example when
evaluating wireless performance.
The Blacklist/User combination is attractive where links are to be established on an ad hoc
basis, as units pre-configured with the user-supplied certificate form a closed group that is
authomatically trusted, whilst only compromised units from the closed group need be added to
the Blacklist.
Page 1-22
Chapter 1: Product description
Wireless operation
Note
Authentication is the process of verifying the identity of the remote unit that is
attempting to form a connection. Authorization is the check that takes place to confirm
that a unit with the authenticated identity is permitted to connect. For example, a
genuine unit that is not under the control of the operator might be authenticated, but
not authorized.
Negotiation of TLS RSA key size
In TLS RSA operation, the ODUs encrypt wireless traffic using the largest mutually supported
key size provided in the respective AES licenses. For example, if the Master has the 256-bit AES
license and the Slave has the 128-bit AES license, then the link may be encrypted using a key
size of 128 bits.
PTP 670 also allows a TLS Minimum Security Level to be configured; this is the smallest key
size that will be allowed in a link between Master and Slave. For example, if the Master has TLS
Minimum Security Level of 128-bit AES and the Slave has no AES license then the link cannot
be established.
In a network where all links must be encrypted, set TLS Minimum Security Level to TLS RSA
128-bit or TLS RSA 256-bit to prevent inadvertent connection of unencrypted links.
Further reading
For information about…
Refer to…
Description of Access Method
Access method on page 1-20
Authentication of the remote ODU
Wireless encryption on page 1-21
Licensing AES encryption
AES license on page 1-57
Capability upgrades on page 1-60
How to generate AES license keys
Generating license keys on page 6-3
How to configure AES encryption
System Configuration page on page 6-39
Configuring the Whitelist of approved
ODUs for an HCMP sector.
Authorization Control page on page 6-63
TLS PSK 128-bit and TLS PSK 256-bit
Wireless Encryption TLS PSK can be used with the following Access Methods:
•
Link Access
•
Link Name Access
•
Group Access
Access Method is automatically configured to Group Access in the HCMP topology.
Page 1-23
Chapter 1: Product description
Wireless operation
Authentication and authorization in TLS PSK 128-bit or TLS PSK 256-bit occur as a single step,
based on the secret pre-shared key. Both ends of the link must be configured for the same key
size. Each unit will connect only to a remote unit that shares the same secret.
Further reading
For information about…
Refer to…
Description of Access Method
Access method on page 1-20
Authentication of the remote ODU
Wireless encryption on page 1-21
Licensing AES encryption
AES license on page 1-57
Capability upgrades on page 1-60
How to generate AES license keys
Generating license keys on page 6-3
How to configure AES encryption
System Configuration page on page 6-39
Over the air rekeying
PTP 670 provides an option for automatically refreshing the AES session keys after a
configured interval. Over the air rekeying canbe used with TLS RSA or TLS PSK encryption
algorithms. This capability is controlled by the Over the Air Rekey license.
Further reading
For information about…
Refer to…
General description of TLS-RSA
TLS RSA on page 1-22
General description of TLS-PSK
TLS PSK 128-bit and TLS PSK 256-bit on page 123
Upgrading for Over the Air Rekey
Capability upgrades on page 1-60
Configuring Rekey Interval
System Configuration page on page 6-39
License keys and regulatory bands
The PTP 670 license key specifies the country of operation for the ODU, and lists the regulatory
bands that are licensed by regulators in that country. If a license key provides access to more
than one regulatory band, PTP 670 provides a choice between the available bands. In each
regulatory band, PTP 670 sets the following aspects of wireless operation to comply with the
applicable regulations:
•
Maximum transmit power
•
Radar avoidance
Page 1-24
Chapter 1: Product description
Wireless operation
•
Transmit power reduction in edge channels
•
Frequency range
•
Channel plan
•
HCMP and/or PTP topology
The country of operation (and thus the supported regulatory bands) can be changed by
generating a new license key at the License Key Generator page of the Cambium web-site, and
entering the new license key using the Installation Wizard.
Caution
To avoid possible enforcement action by the country regulator, always operate links in
accordance with local regulations.
Attention
Pour éviter une éventuelle sanction par le régulateur du pays, utiliser toujours nos
liaisons radiofréquences conformément à la réglementation locale.
Further reading
For information about…
Refer to…
Planning PTP 670 links to conform to the
regulatory band restrictions
Radio spectrum planning on page 3-20
Radio regulations in the country of operation
Compliance with radio regulations on page
4-26
How to generate a license key for the country of
operation
Generating license keys on page 6-3
How to configure the regulatory band
Wireless Configuration page on page 6-25
How to view the regulatory band
System Status page on page 7-3
Regulatory band alarms
Alarms on page 7-20
Designing PTP networks
Using Dynamic Spectrum Optimization
The Dynamic Spectrum Optimization (DSO) feature allows a PTP 670 unit to select wireless
channels for a lower level of radio frequency (RF) interference. This approach is appropriate
where the network consists of a small number of PTP links, or where the RF interference is
predominantly from equipment belonging to other operators.
Page 1-25
Chapter 1: Product description
Wireless operation
Using frequency planning
Networks will benefit from the use of fixed channel allocations if (a) the network consists of
multiple PTP links, and (b) RF interference predominantly arises from equipment in the same
network.
Frequency planning is the exercise of assigning operating channels to PTP units so as to
minimize RF interference between links. Frequency planning must consider interference from
any PTP unit to any other PTP unit in the network. Low levels of interference normally allow for
stable operation and high link capacity.
The frequency planning task is made more straightforward by use of the following techniques:
•
Using several different channels
•
Separating units located on the same mast
•
Using high performance (directional) external antennas
Synchronized networks
TDD synchronization can be used to relax constraints on the frequency planning of PTP
networks. Synchronization has the following benefits:
•
Allows tighter frequency re-use, and thus wider channel bandwidth.
•
Allows more convenient collocation of units on a single mast.
•
Allows use of smaller or lower performance antennas.
•
Reduces inference, resulting in use of more efficient modulation modes.
In a correctly designed synchronised network, all links are configured with the same TDD frame
duration, and the TDD frame contains guard periods longer than the propagation delay
between the most distant interfering units.
Each synchronized unit is assigned to one of two phases. A master ODU can be assigned to
either phase. A slave ODU must be assigned to a different phase from the associated master
ODU. The phase is set by suitable configuration of TDD Frame Offset.
TDD synchronization eliminates RF interference between units in the same phase. This means
that frequency planning in a synchronized network is concerned only with interference
between units in different phases. Frequency planning is still necessary, but the number of
potential interference paths to be considered is halved. Frequency planning in a synchronized
TDD network has approximately the same level of complexity as frequency planning in a
Frequency Division Duplex (FDD) network.
Further reading
For information about…
Refer to…
How to plan networks
Chapter 3: System planning, or contact your
Cambium distributor or re-seller.
TDD synchronization
PTP 670 supports three hardware options for TDD Synchronization:
Page 1-26
Chapter 1: Product description
Wireless operation
•
PTP-SYNC: One PTP-SYNC unit is connected in line in the drop cable between the AC+DC
Power Injector 56V and each Master ODU, close to the AC+DC Power Injector 56V. The PTP
SYNC hardware option can synchronize an isolated or standalone cluster of PTP-SYNC
units without a GPS receiver. An optional GPS receiver can be added to provide networkwide synchronization.
•
CMM5: One CMM5 Power and Sync Injector provides power and optional synchronization
for up to four ODUs. The Universal GPS (UGPS) receiver is always needed in synchronized
networks, and network-wide synchronization is always provided when CMM5 is used for
TDD synchronization.
•
Direct connection between two ODUs: Two PTP 670 Master ODUs may be synchronized in
a standalone configuration using a direct cable connection between wired Ethernet ports.
There is no option in this case to synchronize with a GPS receiver, and so no possibility of
network-wide synchronization. This option may be useful in an isolated 2+0 link, or at the
centre point of a relay of two links using the same mast. For this option, the PSU could be
the AC Power Injector 56V, the AC+DC Enhanced Power Injector 56V, or the CMM5.
PTP-SYNC
Up to ten PTP-SYNCs can be connected in a chain to share the timing signal from one timing
reference.
PTP-SYNC provides two deployment options:
•
An isolated or standalone cluster of PTP-SYNC units, without an external timing reference.
In this case, one ODU acts as a reference for other collocated units. The associated ODUs
may be synchronized with each other, but will not be synchronized with Master ODUs at
other sites.
•
One PTP-SYNC unit, or a cluster of several PTP-SYNC units, connected to an external
timing reference, which is typically a GPS receiver. In this case, all of the associated ODUs
may be synchronized with a network-wide reference, and thereby synchronized with other
Master ODUs in the network. The timing reference can be from any timing system that
provides a 1 Hz signal, accurately synchronized in frequency and phase with a networkwide master timing reference. GPS timing receivers are a very practical way of obtaining a
suitable reference. The PTP-SYNC is compatible with the Trimble Acutime™ GG and
Trimble Acutime™ Gold GPS receivers.
Caution
The PTP-SYNC is compatible only with the AC+DC Power Injector 56V.
The AC Power Injector 56V and CMM5 will not work with a PTP-SYNC, and it is likely
that a fuse will be blown in the PTP-SYNC if this is attempted.
PTP-SYNC is not compatible with standards-based power-over-Ethernet (PoE).
Cluster Management Module (CMM5)
The CMM5 Power and Sync Injector distributes a one pulse-per-second (1 pps) signal from the
associated Universal PGS (UGPS) receiver to each of the connected ODUs. The Injector
supports up to four ODUs. The synchronization signal can be daisy-chained between multiple
CMM5 Power and Sync Injector units for installations with more than four collocated ODUs.
Page 1-27
Chapter 1: Product description
Wireless operation
Direct connection between two ODUs
The Direct Connection option consists of one ODU configured as a free-running
synchronization source, with a 1 pps output on its Aux port, and one ODU configured to receive
the 1 pps signal at its Main PSU port or Aux port. The two ODUs must be interconnected using
standard outdoor Cat5e cable that is gel-filled and shielded with copper-plated steel.
Configuring the TDD frame
In synchronized operation, frame duration and burst duration must be configured directly in
the web-based management interface. Frame duration must be identical across all links in a
synchronized network.
The PTP LINKPlanner provides a capability for computing suitable frame parameters in a
synchronized network. Please refer to the LINKPlanner User Guide for guidance on configuring
TDD synchronization.
Link symmetry is always 1:1 in synchronized PTP networks.
In the HCMP topology, frame duration is determined automatically as a function of the
maximum number of Slaves and the maximum link range.
Link capacity in synchronized networks
The TDD frame duration is extended in synchronized networks to allow for the propagation
delay of the longest link in the network and to incorporate additional guard periods. These
guard periods protect against delayed interference from distant units in the same network.
The longer frame duration results in slightly lower link capacity than for an equivalent nonsynchronized link with the same channel bandwidth and modulation mode. However, TDD
synchronization also reduces interference, and this may allow operation in higher modulation
modes. The benefit of operating in a higher modulation mode normally outweighs the penalty
of the slightly longer TDD frame.
Further reading
For information about…
Refer to…
The PTP-SYNC unit
PTP-SYNC unit on page 2-39
Trimble GPS and UGPS receivers
GPS receivers on page 2-45
Typical deployment diagrams for GPS
GPS receiver interfaces on page 3-9
Choosing a site for the PTP-SYNC unit
PTP-SYNC location on page 3-15
Choosing a site for GPS receivers
GPS receiver location on page 3-15
Use of LINKPlanner for TDD
synchronization
LINKPlanner for synchronized networks on page
3-25
TDD synchronization methods that may be
implemented using PTP-SYNC
Configuration options for TDD synchronization
on page 3-31
TDD frame duration in HCMP topology
Data capacity in HCMP topology on page 3-120
How to install a PTP-SYNC unit
Installing a PTP-SYNC unit on page 5-25
Page 1-28
Chapter 1: Product description
Wireless operation
For information about…
Refer to…
How to install the Trimble GPS receiver
Installing the Trimble Accutime GPS receiver on
page 5-29
How to enable TDD synchronization
Wireless Configuration page on page 6-25
How to configure TDD synchronization
TDD synchronization page (optional) on page 633
How to view TDD synchronization status
System Status page on page 7-3
TDD synchronization alarms
Alarms on page 7-20
How to test a PTP-SYNC installation when a
fault is suspected
Testing PTP-SYNC on page 8-15
Page 1-29
Chapter 1: Product description
Ethernet bridging
Ethernet bridging
This section describes how the PTP 670 ODU processes Ethernet data, and how Ethernet ports
are allocated to the Data Service, Second Data Service, Management Service and Local
Management Service.
Ethernet ports
The PTP 670 Series ODU has three Ethernet ports:
•
Main PSU: The Main PSU port provides a copper Ethernet interface for 100BASE-TX and
1000BASE-T, and accepts power from the AC Power Injector 56V, AC+DC Enhanced Power
Injector 56V or CMM5 to the ODU using a proprietary power over Ethernet (PoE) method.
•
Aux: The Aux port provides a copper Ethernet interface for 100BASE-TX and 1000BASE-T,
and supplies power from the ODU to external equipment using standards-based power
over Ethernet (PoE) complying with IEEE 802.3at.
•
SFP: The SFP port is a small format pluggable receptacle accepting copper or optical plugin modules supplied as part of the SFP module kit.
Data and management services
The PTP 670 Series ODU supports four different types of virtual circuits providing data and
management services.
•
Data Service: This transparent service carries customer’s data between Ethernet ports at
the local ODU and Ethernet ports at an associated remote ODU. In the HCMP topology, the
Data Service additionally provides bridging between Ethernet ports at the same ODU.
•
Second Data Service: This optional point-to-point transparent service offers a second
virtual circuit for customer’s data between one of the Ethernet ports at the local ODU and
one of the Ethernet ports at an associated remote ODU. The Data Service and Second Data
Service are always mapped to different ports at an ODU. The Data traffic of the two
services are distinct and are separately bridged to the appropriate configured remote ODU
port. The Second Data Service is not supported in the HCMP topology.
•
Management Service: This transparent service connects management systems at both
ends of the link with the embedded management agents in the ODUs. The Management
Service may be configured as:
•
In-Band Management
Out-of-Band Management
Local Management Service: The Local Management service provides a connection to the
embedded management agent, isolated from the customer data network. Management
frames in the Local Management Service are not forwarded over the wireless link.
Page 1-30
Chapter 1: Product description
Ethernet bridging
Further reading
For information about…
Refer to…
A more detailed description of the Data
Service
Data Service on page 1-32.
A more detailed description of the
Second Data Service
Second Data Service on page 1-34.
A more detailed description of the Outof-Band Management Service
Out-of-Band Management Service on page 1-36.
SFP optical or copper module kits
SFP module kits on page 2-36
The PSU, AUX and SFP ports of the ODU
ODU interfaces on page 2-9
Diagrams showing Ethernet connections
Typical deployment on page 3-2
How to plan the use of Ethernet ports for
customer and management traffic
Ethernet interfaces on page 3-36
How to install the Ethernet interfaces to
the ODU
Installing the copper Cat5e Ethernet interface on
page 5-14
Installing an SFP Ethernet interface on page 5-25
Installing an Aux Ethernet interface on page 5-54
How to configure the ODU Ethernet
ports
Interface Configuration page on page 6-16
Ethernet port status attributes
Ethernet / Internet on page 7-8
Ethernet port alarms
Alarms on page 7-20
LAN Configuration page on page 6-43
Ethernet switching
PTP topology
When configured for the PTP topology, the ODU provides flexible interconnection of customer
data and network management using several Ethernet ports, but it does not provide Ethernet
bridging between the wired Ethernet ports of the same ODU.
One Ethernet port must be allocated to the Data Service. If the Management Service is
configured for In-Band Management, then these two services share the same Ethernet Port.
If the Second Data Service or Out of Band Management are configured, one Ethernet port must
be allocated to these services.
Up to two ports can be allocated to the Local Management Service.
HCMP topology
When configured for the HCMP topology, the ODU provides conventional Ethernet bridging
between wired Ethernet ports configured for the same service, using an embedded Ethernet
switch.
Page 1-31
Chapter 1: Product description
Ethernet bridging
One to three Ethernet ports may be allocated to the Data Service. If In Band Management is
configured, management access shares the same set of ports.
If Out of Band Management is configured, up to two ports may be allocated to the
Management service. These ports are not used by the Data Service.
Up to two ports can be allocated to the Local Management Service.
Data Service
Transparent Ethernet service
The PTP 670 Series provides an Ethernet service between Ethernet ports at a local ODU and
Ethernet ports at an associated remote ODU. The Ethernet service is based on conventional
layer two transparent bridging, and is equivalent to the Ethernet Private Line (EPL) service
defined by the Metro Ethernet Forum (MEF).
The service is transparent to untagged frames, standard VLAN frames, priority-tagged frames,
provider bridged frames, Q-in-Q frames and provider backbone bridged frames. In each case,
the service preserves MAC addresses, VLAN ID, Ethernet priority and Ethernet payload in the
forwarded frame. The maximum frame size for bridged frames in the customer network is
9600 bytes.
There is no requirement for the customer data network to be connected to the same Ethernet
ports at both ends of a wireless link. For example, it is possible to connect the Main PSU port to
the customer data network at one end of the link and to connect the Aux port to the customer
data network at the other end of the link.
In the HCMP topology, more than one port may be allocated to the Data Service.
Layer two control protocols
The Data Service in the PTP 670 Series is transparent to layer two control protocols (L2CP)
including:
•
Spanning tree protocol (STP), rapid spanning tree protocol (RSTP)
•
Multiple spanning tree protocol (MSTP)
•
Link aggregation control protocol (LACP)
•
Link OAM, IEEE 802.3ah
•
Port authentication, IEEE 802.1X
•
Ethernet local management interface (E-LMI), ITU-T Q.933.
•
Link layer discovery protocol (LLDP)
•
Multiple registration protocol (MRP)
•
Generic attribute registration protocol (GARP)
The PTP 670 Series does not generate or respond to any L2CP traffic.
Quality of service for bridged Ethernet traffic
In the PTP wireless topology, the PTP 670 supports eight traffic queues in the Data Service for
Ethernet frames waiting for transmission over the wireless link. In the HCMP wireless topology,
the PTP 670 supports four queues for each wireless link.
Page 1-32
Chapter 1: Product description
Ethernet bridging
Ethernet frames are classified by inspection of the Ethernet priority code point in the outermost
VLAN tag, the Differentiated Services Code Point (DSCP) in an IPv4 or IPv6 header including
DSCP in an IPv4 or IPv6 datagrams encapsulated in PPP and PPPoE headers, or the Traffic
Class in an MPLS header.
PTP 670 provides a configurable mapping between Ethernet, IP or MPLS priority and
transmission queue, together with a simple way to restore a default mapping based on the
recommended default in IEEE 802.1Q-2005. Untagged frames, or frames with an unknown
network layer protocol, can be separately classified.
Scheduling for transmission over the wireless link is by strict priority. In other words, a frame
at the head of a given queue is transmitted only when all higher priority queues are empty.
Fragmentation
The PTP 670 Series minimizes latency and jitter for high-priority Ethernet traffic by fragmenting
Ethernet frames before transmission over the wireless link. The fragment size is selected
automatically according to channel bandwidth and modulation mode of the wireless link.
Fragments are reassembled on reception, and incomplete Ethernet frames are discarded.
Data port wireless link down alert
The PTP 670 Series provides an optional indication of failure of the wireless link by means of a
brief disconnection of the copper or optical data port allocated to the customer data network.
The Wireless link down alert can be used to trigger protection switching by Spanning Tree
Protocol (STP) or Ethernet Automatic Protection Switching (EAPS) and other higher layer
protocols in a redundant network.
Note
PTP 670 does not support Data port wireless link down alert in the HCMP topology.
Lowest Data Modulation Mode
The PTP 670 ODU can be configured to discard Ethernet frames in the Data Service when the
modulation mode is lower than the configured Lowest Data Modulation Mode.
This feature is likely to be useful in networks that have alternate routes, for example in a ring or
mesh topology where EAPS or RSTP is used to resolve loops. In this application, Lowest Data
Modulation Mode should be set to ensure that an active link will provide at least the minimum
necessary capacity for high-priority constant bit rate traffic such as voice over IP or TDM
pseudo wire. An active link will be blocked when the capacity falls below the minimum
required, triggering a routing change in associated Ethernet switches to bring alternate links
into use.
Lowest Data Modulation Mode should normally be set to BPSK 0.63 Single in simply connected
tree networks or other topologies that do not have alternative routes.
Page 1-33
Chapter 1: Product description
Ethernet bridging
Further reading
For information about…
Refer to…
Factors to be considered when planning
PTP 670 customer data networks
Data network planning on page 3-36
How to configure the Ethernet service
LAN Configuration page on page 6-43
How to configure Ethernet quality of service
QoS Configuration page on page 6-56
How to monitor Ethernet performance
System statistics on page 7-54
Second Data Service
Note
PTP 670 does not support the Second Data Service in the HCMP topology.
Transparent Ethernet service
The PTP 670 Series provides an optional second Ethernet data service between one of the
Ethernet ports at a local ODU and one of the Ethernet ports at an associated remote ODU. The
Ethernet service is based on conventional layer two transparent bridging. The PTP 670
maintains complete separation between Ethernet traffic in the data service and the second data
service.
The service is transparent to untagged frames, standard VLAN frames, priority-tagged frames,
provider bridged frames, Q-in-Q frames and provider backbone bridged frames. In each case,
the service preserves MAC addresses, VLAN ID, Ethernet priority and Ethernet payload in the
forwarded frame. The maximum frame size for bridged frames in the second data service is
2000 bytes.
There is no requirement for the second data service to be connected to the same Ethernet port
at both ends of a wireless link. For example, it is possible to connect the Main PSU port to the
second data service at one end of the link and to connect the Aux port to the second data
service at the other end of the link.
Layer two control protocols
The Second Data Service in the PTP 670 Series is transparent to layer two control protocols
(L2CP) including:
•
Spanning tree protocol (STP), rapid spanning tree protocol (RSTP)
•
Multiple spanning tree protocol (MSTP)
•
Link aggregation control protocol (LACP)
•
Link OAM, IEEE 802.3ah
•
Port authentication, IEEE 802.1X
•
Ethernet local management interface (E-LMI), ITU-T Q.933.
•
Link layer discovery protocol (LLDP)
Page 1-34
Chapter 1: Product description
Ethernet bridging
•
Multiple registration protocol (MRP)
•
Generic attribute registration protocol (GARP)
The management service in the PTP 670 Series does not generate or respond to any L2CP
traffic.
Quality of service for bridged Ethernet traffic
The PTP 670 Series supports a single traffic queue in the Second Data Service for Ethernet
frames waiting for transmission over the wireless link. The priority of the queue can be varied
with respect to the eight queues used for the data service.
Fragmentation
Ethernet frames in the PTP 670 Series Second Data Service are always fragmented for
transmission over the wireless link, even when the single queue for the Second Data Service
has higher priority than all of the data service queues.
Second Data port wireless link down alert
The PTP 670 Series provides an optional indication of failure of the wireless link by means of a
brief disconnection of the copper or optical data port allocated to the Second Data Service. The
Wireless link down alert can be used to trigger protection switching by Spanning Tree Protocol
(STP) or Ethernet Automatic Protection Switching (EAPS) and other higher layer protocols in a
redundant network.
Lowest Second Data Modulation Mode
The PTP 670 ODU can be configured to discard Ethernet frames in the Second Data Service
when the modulation mode is lower than the configured Lowest Second Data Modulation
Mode.
This feature is likely to be useful in networks that have alternate routes, for example in a ring or
mesh topology where EAPS or RSTP is used to resolve loops. In this application, Lowest
Second Data Modulation Mode should be set to ensure that an active link will provide at least
the minimum necessary capacity for high-priority constant bit rate traffic such as voice over IP
or TDM pseudo wire. An active link will be blocked when the capacity falls below the minimum
required, triggering a routing change in associated Ethernet switches to bring alternate links
into use.
Lowest Second Data Modulation Mode should normally be set to BPSK 0.63 Single in simply
connected tree networks or other topologies that do not have alternative routes.
Further reading
For information about…
Refer to…
Factors to be considered when planning
PTP 670 customer data networks
Data network planning on page 3-36
How to configure the Ethernet Second Data
Service
LAN Configuration page on page 6-43
Page 1-35
Chapter 1: Product description
Ethernet bridging
For information about…
Refer to…
How to configure Ethernet quality of service
QoS Configuration page on page 6-56
How to monitor Ethernet performance
System statistics on page 7-54
Out-of-Band Management Service
Transparent Ethernet service
The PTP 670 Series provides an optional Ethernet service for out-of-band network management
between Ethernet ports at a local ODU and Ethernet ports at an associated remote ODU. The
Ethernet service is based on conventional layer two transparent bridging. The PTP 670
maintains complete separation between Ethernet traffic in the customer Data Service and the
Management Service.
The service is transparent to untagged frames, standard VLAN frames, priority-tagged frames,
provider bridged frames, Q-in-Q frames and provider backbone bridged frames. In each case,
the service preserves MAC addresses, VLAN ID, Ethernet priority and Ethernet payload in the
forwarded frame. The maximum frame size for bridged frames in the management network is
2000 bytes.
There is no requirement for the management network to be connected to the same Ethernet
ports at both ends of a wireless link. For example, it is possible to connect the Main PSU port to
the management network at one end of the link and to connect the Aux port to the
management network at the other end of the link.
Layer two control protocols
The Management Service in the PTP 670 Series is transparent to layer two control protocols
(L2CP) including:
•
Spanning tree protocol (STP), rapid spanning tree protocol (RSTP)
•
Multiple spanning tree protocol (MSTP)
•
Link aggregation control protocol (LACP)
•
Link OAM, IEEE 802.3ah
•
Port authentication, IEEE 802.1X
•
Ethernet local management interface (E-LMI), ITU-T Q.933.
•
Link layer discovery protocol (LLDP)
•
Multiple registration protocol (MRP)
•
Generic attribute registration protocol (GARP)
The management service in the PTP 670 Series does not generate or respond to any L2CP
traffic.
Quality of service for bridged Ethernet traffic
The PTP 670 Series supports a single traffic queue in the Management Service for Ethernet
frames waiting for transmission over the wireless link. The priority of the queue can be varied
with respect to the eight queues used for the Data Service.
Page 1-36
Chapter 1: Product description
Ethernet bridging
Fragmentation
Ethernet frames in the PTP 670 Series management service are always fragmented for
transmission over the wireless link, even when the single queue for the management service
has higher priority than all of the customer data queues.
Management port wireless Down Alert
The PTP 670 Series provides an optional indication of failure of the wireless link by means of a
brief disconnection of the copper or optical data port allocated to the management network.
The Wireless link down alert can be used to trigger protection switching by Spanning Tree
Protocol (STP) or Ethernet Automatic Protection Switching (EAPS) and other higher layer
protocols in a redundant network.
Lowest Data Modulation Mode
The Lowest Data Modulation Mode attribute does not prevent bridging in the management
service. See Lowest Data Modulation Mode on page 1-33.
Further reading
For information about…
Refer to…
Factors to be considered when planning
PTP 670 management data networks
Data network planning on page 3-36
How to configure the Ethernet service
LAN Configuration page on page 6-43
How to configure Ethernet quality of service
QoS Configuration page on page 6-56
How to monitor Ethernet performance
System statistics on page 7-54
Ethernet loopback mode
Note
PTP 670 does not support the Ethernet loopback mode in the HCMP topology.
PTP 670 provides a local Ethernet loopback function that can be used to loop traffic between
the Aux Port and one of the other Ethernet ports.
Loopback is intended to assist in the commissioning of a camera or other auxiliary device
collocated with the PTP 670 ODU. For example, when setting up a camera which will ultimately
be connected to the wireless bridge, it may be useful to loop the data back to a second local
interface, to assist in the positioning and alignment of the camera.
When ports are configured for Ethernet local loopback, they are temporarily disconnected from
their allocated function and connected together internally within the PTP 670 ODU. The
Management Service and Local Management Service are disconnected from a port configured
for loopback. In this case, it will not be possible to manage the ODU from a local Ethernet port.
For this reason the Ethernet loopback is always disabled when the ODU is rebooted or powercycled, restoring the previous port configuration and any associated management paths.
Page 1-37
Chapter 1: Product description
Ethernet bridging
During loopback operation, the same frame size restrictions that apply to management traffic
are present, jumbo frames are not supported and the maximum frame size is restricted to
1536 bytes.
Loopback is able to loop between Ethernet ports operating at different line rates if required,
and it is possible to configure a Loopback between ports operating at 1000BASE-T/LX/SX and
100BASE-TX if needed.
Further reading
For information about…
Refer to…
How to configure Ethernet loopback
LAN Configuration page on page 6-43
Protocol model for PTP topology
Ethernet bridging behavior at each end of the wireless link is equivalent to a two-port,
managed, transparent MAC bridge where the two ports are a wired Ethernet port allocated to
the Data Service, Second Data Service, Out-of-Band Management Service, and the Wireless
port.
Frames are transmitted at the Wireless port over a proprietary point-to-point circuit-mode link
layer between ends of the PTP 670 link. The Wireless Port provides two distinct service access
ports (SAPs) where the first is always used for the Data Service, while the second is used by
either the Second Data Service or Out-of-Band Management Service.
Ethernet frames received at the Ethernet ports, or generated internally within the management
agent, are encapsulated within a lightweight MAC layer for transmission over the wireless link.
Protocol layers involved in bridging between Ethernet and wireless interfaces are shown in
Figure 4. Protocol layers involved in bridging between external interfaces and the management
agent are shown in Figure 5. In these figures, the layers have the meanings defined in IEEE
802.1Q-2005.
Page 1-38
Chapter 1: Product description
Ethernet bridging
Figure 4 Protocol layers between Ethernet and wireless interfaces
Wireless Port
Ethernet Port
Media Access Method
Independent
Functions
MAC Relay Entity
Media Access Method Dependent
Convergence Functions
PTP Medium Access
Method
IEEE 802.3
PTP Security
(Optional)
PTP Physical Layer
Ethernet
Wireless
D-SAP = Data Service Access Point
2D-SAP = Second Data Service Access Point
M-SAP = Management Service Access Point
Page 1-39
Media Access Method
Specific Functions
Chapter 1: Product description
Ethernet bridging
Figure 5 Protocol layers between external interfaces and the management agent
Management Agent
HTTP/SNMP/SMTP
TCP/IP
Management, Wireless,
Data Ports
MAC Relay Entity
Media Access Method
Specific Functions
Further reading
For information about…
Refer to…
Layer two control protocols (L2CPs)
identified by PTP 670
Layer two control protocols on page 3-36
Synchronous Ethernet
Note
PTP 670 does not support Synchronous Ethernet in the HCMP topology.
Page 1-40
Chapter 1: Product description
Ethernet bridging
PTP 670 can be configured to relay a Synchronous Ethernet frequency reference across the
wireless link, supporting operation as part of an ITU-T G.781 Synchronous Digital Hierarchy. A
single PTP 670 link has at least two, and up to six, active Ethernet ports. When the link is
synchronised to an external frequency reference, one of these active ports receives the
reference (acting a Sync E slave port) and the remaining active ports transmit the frequency
reference (acting as Sync E master ports).
At each end of the link, either the Main PSU port or the Fiber SFP port can be nominated as a
candidate Sync E Slave Port.
In an established link, if the ODU detects a valid reference at the nominated port at the local
end, or at the nominated port at the remote end, it relays the reference received at this port to
all of the remaining Ethernet ports. If the ODU detects a valid reference at both ends of the link,
it selects the best reference. If the ODU does not detect any valid reference at either end of the
link, it operates in a free-running or holdover mode.
The nominated Sync E Slave Port can be set to Main PSU Port at one end of the link and to SFP
Port at the other end of the link, forwarding the reference between two different media.
If the wireless link is down, the ODU configured as the TDD Master can relay the reference
received at the nominated Sync E Slave Port to the remaining ports. The ODU configured as
the TDD Slave does not forward the reference frequency until the link is established.
PTP 670 makes the selection of the best incoming reference based on the Quality Level (QL) in
Synchronization Status Messages (SSMs) received at the nominated ports. SSMs are
processed and transmitted as specified by ITU-T G.8264 and in Section 5 of G.781.
Note
PTP 670 does not support Synchronous Ethernet on a copper SFP module.
Further reading
For information about…
Refer to…
Relationship between synchronous
Ethernet and TDM
TDM description on page 1-43
Availability of synchronous Ethernet
Capability upgrades on page 1-60
Relationship between synchronous
Ethernet and Ethernet port allocation
Additional port allocation rules on page 3-45
How to configure synchronous Ethernet
LAN Configuration page on page 6-43
Upgrading to synchronous Ethernet
Generating license keys on page 6-3
Synchronous Ethernet status indicators
Synchronous Ethernet on page 7-12
Synchronous Ethernet alarms
Alarms on page 7-20
Synchronous Ethernet status
SyncE Status page on page 7-70
Page 1-41
Chapter 1: Product description
Ethernet bridging
IEEE 1588-2008 Transparent Clock
Note
PTP 670 does not support IEEE 1588-2008 Transparent Clock in the HCMP topology.
PTP 670 is capable of operating as an IEEE 1588-2008 Transparent Clock. When operational,
IEEE 1588-2008 event frames (Sync, Delay_Req, Pdelay_Req, Pdelay_Resp) have their
“Correction Field” adjusted to reflect the residence time of the frame in the system. This results
in greatly improved performance of downstream 1588-2008 slave clocks. The Transparent
Clock feature is available at the Main PSU Port and at the SFP Port when a fiber SFP module is
installed.
Unicast and multicast addressing models are supported, along with UDP over IPv4 or IPv6, and
Ethernet communication services. The IEEE 1588 messages can be encapsulated in Untagged,
C-tagged, S-tagged, S-C-tagged and C-C-tagged Ethernet frames.
Note
For the most accurate residence time corrections, use Synchronous Ethernet in
conjunction with the Transparent Clock feature. In this configuration, PTP 670 uses
the Synchronous Ethernet clock to increase the accuracy of 1588 residence time
measurements.
Note
PTP 670 does not support IEEE 1588 Transparent Clock on a copper SFP module.
Further reading
For information about…
Refer to…
Relationship between IEEE 1588-2008 Transparent
Clock and TDM
TDM description on page 1-43
Availability of IEEE 1588-2008 Transparent Clock
Capability upgrades on page 1-60
Relationship between IEEE 1588-2008 Transparent
Clock and Ethernet port allocation
Additional port allocation rules on page 345
Relationship between IEEE 1588-2008 Transparent
Clock and VLAN membership
VLAN membership on page 3-50
Upgrading to IEEE 1588-2008
Generating license keys on page 6-3
How to configure IEEE 1588-2008 Transparent
Clock
LAN Configuration page on page 6-43
IEEE 1588-2008 Transparent Clock status
indicators
Synchronous Ethernet on page 7-12
IEEE 1588-2008 Transparent Clock alarms
Alarms on page 7-20
Page 1-42
Chapter 1: Product description
TDM bridging
TDM bridging
Note
PTP 670 does not support TDM bridging in the HCMP topology.
This section describes how TDM traffic (E1 or T1) may be carried over PTP 670 links.
If a NIDU is installed at each link end, the PTP 670 link supports up to eight E1 channels or up to
eight T1 channels. The link relays unstructured E1 or T1 data and provides accurate timing
transfer.
TDM description
PTP 670 Series bridges up to eight E1 or T1 telecoms circuits over a single-hop PTP 670
wireless link using the optional Network Indoor Unit (NIDU). The NIDU provides the eight TDM
interfaces on individual RJ45/RJ48 connectors, together with an Ethernet interface to the
operator’s data network and a separate Ethernet interface to the PTP 670 Series ODU. One
NIDU is required at each end of the link. It operates from a 48 V DC power supply.
TDM circuits established using the NIDUs are structure agnostic, meaning that the circuits can
bridge framed or unframed data.
The NIDUs are tightly integrated with associated ODUs providing for simple configuration,
accurate timing transfer, low and predictable latency, high efficiency, quick settling time, and a
timing-only mode that maintains timing transfer when the wireless link has insufficient
capacity to bridge the configured TDM data.
Through timing
TDM bridging in the PTP 670 series uses the “through timing” model. In other words, the clock
frequency used for transmitting TDM data is, on average, exactly the same as the clock
frequency received at the corresponding TDM port at the remote end of the link. The wander
and jitter in the transmit clock complies with applicable requirements of ITU-T G.823 and G.824
without additional external frequency references. Timing transfer is independent between
individual circuits, and between transmit and receive directions of the same circuit.
NIDUs and TDM
TDM circuits in PTP 670 span a single wireless link. To transmit TDM data across a network
segment consisting of several wireless links, use one pair of NIDUs for each wireless link, and
interconnect the TDM ports at relay sites.
The NIDU is not a general-purpose TDM multiplexer, and will not interwork with standardsbased products from other manufacturers. The NIDU does not support (and does not need to
support) internal, external or loop timing modes. The NIDU does not accept (or need) an
external frequency reference.
The NIDU is not separately managed, and it does not have an IP address. Instead, the ODU is
used to configure and monitor the associated NIDU through the standard HTTP/HTTPS, SNMP,
SMTP and syslog interfaces already used by the ODU.
Page 1-43
Chapter 1: Product description
TDM bridging
The NIDU always connects to the ODU using the Main PSU port of the ODU. This constrains
the flexible allocation of ports to services somewhat.
Timing transfer for TDM circuits
Accurate timing transfer for TDM circuits in the PTP 670 Series is based on the same
underlying technology as the IEEE 1588 Transparent Clock and Synchronous Ethernet features.
Consequently, the IEEE 588 and Synchronous Ethernet features are not available when TDM
bridging is enabled. Similarly, TDM bridging is not available if either IEEE 1588 or Sync E is in
use. The Adaptive setting for Link Symmetry is not compatible with TDM bridging.
TDM bridging is a licensed feature, and may require an optional upgrade for the ODU
firmware.
Lowest TDM modulation mode
In narrow channel bandwidths and lower modulation modes, the link may have insufficient
capacity to relay the E1/T1 payload; in this case, the wireless link continues to carry timing
information in order to maintain accurate clock synchronization. The relay of TDM data
resumes automatically when the link reaches a suitable modulation mode.
Links that are able to operate consistently in a high modulation mode can take advantage of
lower link latency. This option is configured by setting the "Lowest TDM Modulation Mode"
during installation. Appropriate settings for this control may be determined by using the
LINKPlanner tool. The reduction in latency is achieved by disabling the relay of TDM data in
lower modulation modes, and this necessarily results in somewhat lower availability for the
TDM circuit. The loss of availability can be estimated using the LINKPlanner.
The unit will override the user setting of Lowest TDM Modulation Mode if the selected mode
has insufficient capacity to carry the TDM data, or if the mode demands very high latency and
requires more buffering than the link can provide.
Fixed frequency operation
In the PTP 670 link, data errors may occur during channel changes on an operational link. It
may be appropriate to minimize channel-change-related errors in a link carrying TDM traffic by
preventing channel changes initiated by DSO. This can be achieved by barring all channels
except one in the Spectrum Expert or Spectrum Management pages, or alternatively by
selecting Fixed Frequency mode. These steps unavoidably disable interference avoidance
mechanisms, and should not be taken if the risk of errors due to interference is more severe
than the risk due to channel changes.
Fixed frequency operation is not available when radar detection requirements exist in the
frequency band. Channel barring is allowed in radar regions, but it is unwise to bar all channels
except one, as any radar signals detected on that channel will drop the link for up to 30
minutes.
Page 1-44
Chapter 1: Product description
TDM bridging
Ethernet cables for TDM
The Ethernet cables from the ODU via the PSU to the NIDU must be capable of supporting
operation at 1000BASE-T. If the ODU port has negotiated a link at 100BASE-T, the NIDU will not
send or receive TDM data and will not bridge customer data traffic.
Further reading
For information about…
Refer to…
The hardware required to implement TDM
Network indoor unit (NIDU) on page 2-47
A typical E1 or T1 site deployment
E1 or T1 interfaces on page 3-5
Where to locate the NIDU
NIDU location on page 3-16
TDM interface specifications
Ethernet interfaces on page 3-36
The effect of TDM on data throughput
TDM traffic load on page 3-127
How to install TDM hardware
Installing a NIDU on page 5-39
How to generate TDM (E1 or T1) license keys
Generating license keys on page 6-3
How to install TDM license keys (part of the
Installation Wizard)
Software License Key page on page 6-13
How to enable E1 or T1 and configure TDM
channels (part of the Installation Wizard)
Interface Configuration page on page 6-16
How to configure NIDU LAN port autonegotiation
LAN Configuration page on page 6-43
How to configure TDM channels and initiate
loopback tests (after installation)
TDM Configuration page on page 6-62
How to enable TDM alarms
Diagnostic Alarms page on page 6-83
The meaning of TDM status attributes
System Status page on page 7-3
The meaning of TDM alarms
Alarms on page 7-20
How to check the NIDU LEDs, perform a TDM
loopback test, and check for 1000BASE-T
Testing a TDM link on page 8-18
To find the latency of a TDM link
System Status page, TDM Latency attribute
(Table 205)
Alternatively, use LINKPlanner
Page 1-45
Chapter 1: Product description
System management
System management
This section introduces the PTP 670 management system, including the web interface,
installation, configuration, alerts and upgrades.
Management agent
PTP 670 equipment is managed through an embedded management agent. Management
workstations, network management systems or PCs can be connected to this agent using a
choice of in-band or out-of-band network management modes. These modes are described in
detail in Network management on page 1-47.
The management agent includes a dual IPv4/IPv6 interface at the management agent. The IP
interface operates in the following modes:
•
IPv4 only (default)
•
IPv6 only
•
Dual IPv4/IPv6
In the dual IPv4/IPv6 mode, the IP interface is configured with an IPv4 address and an IPv6
address and can operate using both IP versions concurrently. This dual mode of operation is
useful when a network is evolving from IPv4 to IPv6.
The management agent supports the following application layer protocols (regardless of the
management agent IP mode):
•
Hypertext transfer protocol (HTTP)
•
HTTP over transport layer security (HTTPS/TLS)
•
RADIUS authentication
•
TELNET
•
Simple network management protocol (SNMP)
•
Simple mail transfer protocol (SMTP)
•
Simple network time protocol (SNTP)
•
System logging (syslog)
Note
PTP 670 supports a single public key certificate for HTTPS. This certificate must be
based on an IPv4 or IPv6 address as the Common Name. The Dual IPv4/IPv6 interface
should not normally be used when HTTPS is required.
Page 1-46
Chapter 1: Product description
System management
Network management
IPv4 and IPv6 interfaces
The PTP 670 ODU contains an embedded management agent with IPv4 and IPv6 interfaces.
Network management communication is exclusively based on IP and associated higher layer
transport and application protocols. The default IPv4 address of the management agent is
169.254.1.1. There is no default IPv6 address. The PTP 670 does not require use of
supplementary serial interfaces.
MAC address
The management agent end-station MAC address is recorded on the enclosure and is
displayed on the Status web page. The MAC address is not configurable by the user.
VLAN membership
The management agent can be configured to transmit and receive frames of one of the
following types: untagged, priority-tagged, C-tagged (IEEE 802.1Q) or S-tagged (IEEE 802.1ad).
C-tagged and S-tagged frames must be single tagged. The VLAN ID can be 0 (priority tagged)
or in the range 1 to 4094.
Ethernet and DSCP priority
The management agent transmits IPv4 and IPv6 management packets with a configurable
DSCP value in the range 0 to 63. If the management agent is configured to operate in a
management VLAN, the Ethernet frames will be transmitted with a configurable Ethernet
priority in the range 0 to 7. The same DSCP and Ethernet priorities are assigned to all
management packets generated by the agent. Management frames are multiplexed with
customer data frames of the same priority for transmission at the wireless port.
Access to the management agent
The management agent can be reached from any Ethernet port at the local ODU that is
allocated to the Management Service or the Local Management Service.
If the wireless link is established, the management agent can also be reached from the remote
ODU via an Ethernet port that is allocated to the Management Service.
Management frames are processed by the management agent if (a) the destination MAC
address in the frame matches the ODU MAC address, and (b) the VLAN ID in the frame
matches the VLAN configuration of the management agent.
If Local Packet Filtering is enabled, unicast frames forwarded to the management agent are
filtered, that is, not forwarded in the customer data network or the management network.
MAC address and IP address of the management agent
The MAC address and IP address used by the management agent will be the same at each port
that is allocated the Management Service or Local Management Service. The management
agent does not provide the function of a dual-homed or multi-homed host. Network designers
should take care to ensure that the ODU will not be connected to more than one IP network.
Page 1-47
Chapter 1: Product description
System management
Further examples of useful port allocation schemes are provided in Chapter 3: System
planning.
Source address learning
If Local Packet Filtering is enabled, the PTP 670 learns the location of end stations from the
source addresses in received management frames. The management agent filters transmitted
management frames to ensure that each frame is transmitted at the appropriate Ethernet port,
or over the wireless link as required to reach the correct end station. If the end station address
is unknown, then management traffic is transmitted at each of Ethernet port enabled for
management and over the wireless link.
Further reading
For information about…
Refer to…
Planning the IP interface
IP interface on page 3-50
How to configure the IP interface
Interface Configuration page on page 6-16
How to configure the target MAC address
Wireless Configuration page on page 6-25
Planning VLAN membership
VLAN membership on page 3-50
How to configure VLAN for the management
interface
Interface Configuration page on page 6-16
Planning the Ethernet and IP (DSCP) priority
Priority for management traffic on page 3-50
Planning the use of Ethernet ports for customer
and management traffic
Additional port allocation rules on page 3-45
LAN Configuration page on page 6-43
IPv6
The PTP 670 management agent supports the following IPv6 features:
Neighbor discovery
PTP 670 supports neighbor discovery for IPv6 as specified in RFC 4861 including:
•
Neighbor un-reachability detection (NUD),
•
Sending and receiving of neighbor solicitation (NS) and neighbor advertisement (NA)
messages,
•
Processing of redirect functionality.
PTP 670 sends router solicitations, but does not process router advertisements.
Path MTU discovery and packet size
PTP 670 supports path MTU discovery as specified in RFC 1981, and packet fragmentation and
reassembly as specified in RFC 2460 and RFC 5722.
Page 1-48
Chapter 1: Product description
System management
ICMP for IPv6
PTP 670 supports ICMPv6 as specified in RFC 4443. PTP 670 does not support RFC 4884 (multipart messages).
Addressing
The PTP 670 management agent is compatible with the IPv6 addressing architecture specified
in RFC 4291. PTP 670 allows static configuration of the following:
•
Global unicast address
•
IPv6 prefix length
•
IPv6 default router.
PTP 670 additionally assigns an automatically configured Link Local address using stateless
address auto-configuration (SLAAC) as specified in RFC 4862. PTP 670 does not assign a global
unicast IP address using SLAAC.
PTP 670 responds on the standard management agent interfaces (HTTP, HTTPS, syslog, Telnet,
SNMP, SMTP, SNTP) using the global unicast address.
Privacy extensions
PTP 670 does not support the privacy extensions specified in RFC 4941.
DHCPv6
PTP 670 does not support address assignment using DHCPv6. The address of the management
agent must be configured statically.
Multicast listener discovery for IPv6
The PTP 670 management agent supports Multicast Listener Discovery version 1 (MLDv1) as
specified in RFC 2710.
PTP 670 does not support Multicast Listener Discovery version 2 (MLDv2).
Textual representation of IPv6 addresses
PTP 670 allows users to input text-based IP addresses in any valid format defined in RFC 5952.
IPv6 addresses are automatically converted by PTP 670 to the preferred compressed form,
apart from those using the prefix length on the same line as the address, such as 2000::1/64.
Security
PTP 670 does not support IP security (IPsec).
Page 1-49
Chapter 1: Product description
System management
Further reading
For information about…
Refer to…
Planning the IPv6 interface
IP interface on page 3-50
How to enable IPv6 capability
Software License Key page on page 6-13
How to configure IPv6
Interface Configuration page on page 6-16
LAN Configuration page on page 6-43
Web server
The PTP 670 management agent contains a web server. The web server supports the HTTP and
HTTPS/TLS interfaces.
Web-based management offers a convenient way to manage the PTP 670 equipment from a
locally connected computer or from a network management workstation connected through a
management network, without requiring any special management software. The web-based
interfaces are the only interfaces supported for installation of PTP 670.
Web pages
The web-based management interfaces provide comprehensive web-based fault, configuration,
performance and security management functions organized into the following web-pages and
groups:
•
Home: The Home web-page reports Wireless Link Status and basic information needed to
identify the link. The Home page additionally lists all active alarm conditions.
•
Status: The Status web-page reports the detailed status of the PTP 670.
•
System: These web-pages are used for configuration management, including IP and
Ethernet, AES encryption keys, quality of service and software upgrade. The System pages
additionally provide detailed counters and diagnostic measurements used for performance
management.
•
Installation: The Installation Wizard is used to install license keys, configure the PTP 670
wireless interface and to arm the unit ready for alignment.
•
Management: These web-pages are used to configure the network management interfaces.
•
Security: The Security Wizard is used to configure the HTTPS/TLS interface and other
security parameters such as the AES wireless link encryption key and the key of keys for
encrypting CSPs on the ODU. The Security Wizard is disabled until AES encryption is
enabled by license key.
•
Change Password: The Change Password web page changes the web interface password of
the active user. The User Accounts page is also used to change passwords.
•
Logout: Allows a user to log out from the web-based interface.
Page 1-50
Chapter 1: Product description
System management
Transport layer security
The HTTPS/TLS interface provides the same set of web-pages as the HTTP interface, but allows
HTTP traffic to be encrypted using Transport Layer Security (TLS). PTP 670 uses AES
encryption for HTTPS/TLS. Operation of HTTPS/TLS is enabled by purchase of an optional AES
upgrade.
HTTPS/TLS requires installation of a private key and a public key certificate where the common
name of the subject in the public key certificate is the IP address or host name of the PTP 670
unit. PTP 670 supports certificates with 2048-bit key size.
HTTPS/TLS operation is configured through the web-based interfaces using the Security
Wizard.
Note
The PTP 670 has no default public key certificate, and Cambium Networks is not able
to generate private keys or public key certificates for specific network applications.
Note
PTP 670 supports a single public key certificate for HTTPS. This certificate must be
based on an IPv4 or IPv6 address as the Common Name. Any attempt to use HTTPS
without a certificate for the associated IP address will not be secure, and will trigger
browser security warnings. It follows from this that the Dual IPv4/IPv6 interface should
not normally be used when HTTPS is required.
User account management
PTP 670 allows a network operator to configure a policy for login attempts, the period of
validity of passwords and the action taken on expiry of passwords.
Identity-based user accounts
The PTP 670 web-based interface provides two methods of authenticating users:
•
Role-based user authentication allows the user, on entry of a valid password, to access all
configuration capabilities and controls. This is the default method.
•
Identity-based user authentication supports up to 10 users with individual usernames and
passwords.
When identity-based user accounts are enabled, a security officer can define from one to ten
user accounts, each of which may have one of the three possible roles:
•
Security officer.
•
System administrator.
•
Read only.
Identity-based user accounts are enabled in the Local User Accounts page of the web-based
interface.
Page 1-51
Chapter 1: Product description
System management
Password complexity
PTP 670 allows a network operator to enforce a configurable policy for password complexity.
Password complexity configuration additionally allows a pre-determined best practice
configuration to be set.
SNMP control of passwords
PTP 670 allows the role-based and identity-based passwords for the web-based interface to be
updated using the proprietary SNMP MIB. This capability is controlled by the SNMP Control of
Passwords, and is disabled by default.
SNMP Control of Passwords can be used together with SNMPv3 to provide a secure means to
update passwords from a central network manager. However, password complexity rules are
not applied.
Further reading
For information about…
Refer to…
How to log in and use the menu
Using the web interface on page 6-6
Planning the security material needed for
HTTPS/TLS.
Security planning on page 3-56
How to configure user accounts
Local User Accounts page on page 6-72
RADIUS authentication
PTP 670 supports remote authentication for users of the web interface using the Remote
Authentication Dial-In User Service (RADIUS) with one of the following authentication
methods:
•
Challenge Handshake Authentication Protocol (CHAP)
•
Microsoft CHAP Version 2 (MS-CHAPv2)
PTP 670 supports connections to primary and secondary RADIUS servers. The RADIUS
interface is configured through the RADIUS Authentication page of the web-based interfaces.
PTP 670 RADIUS supports the standard Service Type attribute to indicate authentication roles
of System Administrator and Read Only together with a vendor specific attribute to indicate
authentication roles of Security Officer, System Administrator, and Read Only.
Remote authentication can be used in addition to local authentication, or can be used as a
replacement for local authentication. If remote and local authentications are used together, PTP
670 checks log in attempts against locally stored user credentials before submitting a challenge
and response for remote authentication. Remote authentication is not attempted if the
username and password match locally stored credentials, or fails against the local database.
RADIUS is only available when PTP 670 is configured for Identity-based User Accounts.
Page 1-52
Chapter 1: Product description
System management
Further reading
For information about…
Refer to…
How to plan the use of RADIUS
Planning for RADIUS operation on page 3-63
How to configure RADIUS.
RADIUS Configuration page on page 6-77
SNMP
The management agent supports fault and performance management by means of an SNMP
interface. The management agent is compatible with SNMP v1, SNMP v2c, and SNMPv3 using
the following Management Information Bases (MIBs):
•
RFC-1493. BRIDGE-MIB. dot1dBase group.
•
RFC-2233. IF-MIB. Interfaces group, and ifXTable table.
•
RFC-3411. SNMP-FRAMEWORK-MIB. snmpEngine group.
•
RFC-3412. SNMP-MPD-MIB. snmpMPDStats group.
•
RFC-3413. SNMP-TARGET-MIB. snmpTargetObjects group and SNMP-NOTIFICATION-MIB
snmpNotifyTable table.
•
RFC-3414. SNMP-USER-BASED-SM-MIB. usmStats group and usmUser group.
•
RFC-3415. SNMP-VIEW-BASED-ACM-MIB vacmMIBObjects group.
•
RFC-3418. SNMPv2-MIB. System group, SNMP group, and set group.
•
RFC-3826. SNMP-USM-AES-MIB. usmAesCfb128Protocol OID.
•
RFC-4293 IP-MIB, ipForwarding, ipAdEntAddr, ipAdEntIfIndex, ipAdEntNetMask
•
PTP 670 Series proprietary MIB.
Further reading
For information about…
Refer to…
How to plan for SNMPv1/2c
Planning for SNMP operation on page 3-54
How to enable SNMP control of HTTP, Telnet
and passwords
Web-Based Management page on page 6-70
How to configure SNMPv1 or SNMPv2c
SNMP pages (for SNMPv1/2c) on page 6-99
How to upgrade software remotely using
Trivial FTP (TFTP) triggered by SNMP
Upgrading software using TFTP on page 6-127
HTTP and Telnet options on page 6-113
Simple Network Time Protocol (SNTP)
The clock supplies accurate date and time information to the system. It can be set to run with
or without a connection to a network time server (SNTP). It can be configured to display local
time by setting the time zone and daylight saving in the Time web page.
Page 1-53
Chapter 1: Product description
System management
If an SNTP server connection is available, the clock can be set to synchronize with the server
time at regular intervals. For secure applications, the PTP 670 can be configured to authenticate
received NTP messages using an MD5 signature.
Further reading
For information about…
Refer to…
How to plan for SNTP operation
Planning for SNTP operation on page 3-56
How to configure SNTP
Time Configuration page on page 6-84
SNMPv3 security
SNMP Engine ID
PTP 670 supports four different formats for SNMP Engine ID:
•
MAC address
•
IPv4 address
•
Configurable text string
•
IPv6 address
SNMPv3 security configuration is re-initialized when the SNMP Engine ID is changed.
User-based security model
PTP 670 supports the SNMPv3 user-based security model (USM) for up to 10 users, with MD5,
SHA-1, DES and (subject to the license key) AES protocols in the following combinations:
•
No authentication, no privacy,
•
MD5, no privacy,
•
SHA-1, no privacy,
•
MD5, DES,
•
SHA-1, DES,
•
MD5, AES,
•
SHA-1, AES.
Use of AES privacy requires the PTP 670 AES upgrade described in AES license on page 1-57.
View-based access control model
PTP 670 supports the SNMPv3 view-based access control model (VACM) with a single context.
The context name is the empty string. The context table is read-only, and cannot be modified
by users.
Page 1-54
Chapter 1: Product description
System management
Access to critical security parameters
The SNMPv3 management interface does not provide access to critical security parameters
(CSPs) of PTP 670. It is not possible to read or modify AES keys used to encrypt data
transmitted at the wireless interface. Neither is it possible to read or modify security
parameters associated with TLS protection of the web-based management interface. The
recovery mode option to zeroize CSPs does not affect SNMPv3 configuration.
MIB-based management of SNMPv3 security
PTP 670 supports a standards-based approach to configuring SNMPv3 users and views
through the SNMP MIB. This approach provides maximum flexibility in terms of defining views
and security levels appropriate for different types of user.
PTP 670 provides a default SNMPv3 configuration. This initial configuration is not secure, but it
provides the means by which a secure configuration can be created using SNMPv3.
The secure configuration should be configured in a controlled environment to prevent
disclosure of the initial security keys necessarily sent as plaintext, or sent as encrypted data
using a predictable key. The initial security information should not be configured over an
insecure network.
The default configuration is restored when any of the following occurs:
•
All ODU configuration data is erased.
•
All SNMP users are deleted using the SNMP management interface.
•
The SNMP Engine ID Format has been changed.
•
The SNMP Engine ID Format is Internet Address AND the Internet Address has been
changed.
•
The SNMP Engine ID Format is Text String AND the text string has been changed.
•
The SNMP Engine ID Format is MAC Address AND configuration has been restored using a
file saved from a different unit.
•
SNMPv3 Security Management is changed from web-based to MIB-based.
The default user configuration is specified in SNMPv3 default configuration (MIB-based) on
page 3-62.
PTP 670 creates the initial user and template users with localized authentication and privacy
keys derived from the passphrase string 123456789. Authentication keys for the templates
users are fixed and cannot be changed. Any or all of the template users can be deleted.
The default user initial is created with a view of the entire MIB, requiring authentication for
SET operations. There is no access for template users.
Note
VACM grants access for requests sent with more than the configured security level.
Page 1-55
Chapter 1: Product description
System management
The default user initial will have read/write access to the whole of the MIB. This is described
in further detail in View-based access control model on page 1-54. The template users have no
access to the MIB in the default configuration. User initial will normally be used to create one
or more additional users with secret authentication and privacy keys, and with appropriate
access to the whole of the MIB or to particular views of the MIB according to the operator’s
security policy. New users must be created by cloning template users. The user initial may
then be deleted to prevent access using the well-known user name and keys. Alternatively, the
keys associated with initial may be set to some new secret value.
Web-based management of SNMPv3 security
PTP 670 supports an alternative, web-based approach for configuring SNMPv3 security. In this
case, the web-based interface allows users to specify SNMPv3 users, security levels, privacy
and authentication protocols, and passphrases. Web-based management will be effective for
many network applications, but the capabilities supported are somewhat less flexible than
those supported using the MIB-based security management.
Selection of web-based management for SNMPv3 security disables the MIB-based security
management.
Web-based management of SNMPv3 security allows for two security roles:
•
Read Only
•
System Administrator
Read Only and System Administrator users are associated with fixed views allowing access to
the whole of the MIB, excluding the objects associated with SNMPv3 security. System
Administrators have read/write access as defined in the standard and proprietary MIBs.
Web-based management of SNMPv3 security allows an operator to define the security levels
and protocols for each of the security roles; all users with the same role share a common
selection of security level and protocols.
Web-based security configuration is re-initialized when any of the following occurs:
•
All ODU configuration data is erased.
•
The SNMP Engine ID Format has been changed.
•
The SNMP Engine ID Format is Internet Address and the Internet Address has been
changed.
•
The SNMP Engine ID Format is Text String and the text string has been changed.
•
The SNMP Engine ID Format is MAC Address and configuration has been restored using a
file saved from a different unit.
•
SNMPv3 Security Management is changed from MIB-based to web-based.
Additionally, all SNMP user accounts are disabled when the authentication protocol, the
privacy protocol, or the security level is changed.
Downgrade of the license key
A possible lockout condition exists if a user downgrades the PTP 670 license key so as to
disable the AES capability when SNMPv3 users are configured with AES privacy and VACM is
configured to require privacy. In this case, recovery is by either (a) restoring the correct license
key, or (b) using recovery mode to rest all configuration and entering new configuration.
Option (b) will cause default users and access configuration to be re-created.
Page 1-56
Chapter 1: Product description
System management
Further reading
For information about…
Refer to…
How to plan for SNMPv3 operation
Planning for SNMPv3 operation on page 3-60
How to configure SNMPv3
SNMP pages (for SNMPv3) on page 6-90
System logging (syslog)
PTP 670 supports the standard syslog protocol to log important configuration changes, status
changes and events. The protocol complies with RFC 3164.
PTP 670 creates syslog messages for configuration changes to any attribute that is accessible
via the web-based interface, or via the enterprise MIB at the SNMP interface.
PTP 670 additionally creates syslog messages for changes in any status variable displayed in
the web-based interface.
PTP 670 creates syslog messages on a number of events (for example successful and
unsuccessful attempts to log in to the web-based interface).
PTP 670 can be configured to send syslog messages to one or two standard syslog servers.
Additionally, PTP 670 logs event notification messages locally. Locally-stored event messages
survive reboot of the unit, and are overwritten only when the storage capacity is exhausted
(approximately 2000 messages). The locally stored events can be reviewed using the webbased user interface.
Only users with Security Officer role are permitted to configure the syslog client. Users with
Security Officer, System Administrator or Read Only roles are permitted to review the locally
logged event messages.
Further reading
For information about…
Refer to…
Configuring system logging
Syslog Configuration page on page 6-88
Syslog alarms
Alarms on page 7-20
How to view the local log of event messages
Syslog page on page 7-25
How to interpret syslog messages
Format of syslog server messages on page 7-25
AES license
PTP 670 provides optional encryption using the Advanced Encryption Standard (AES).
Encryption is not available in the standard PTP 670 system.
AES upgrades are purchased from your Cambium Point-to-Point distributor or solutions
provider. The upgrade authorizes AES operation for one ODU. Two upgrades are needed to
operate AES on a link.
AES encryption may be used in the following ways:
Page 1-57
Chapter 1: Product description
System management
•
At the wireless port to encrypt data transmitted over the wireless link.
•
At the SNMP management interface in the SNMPv3 mode.
•
At the HTTPS/TLS management interface.
Two levels of encryption are available to purchase:
•
128-bit: This allows an operator to encrypt all traffic sent over the wireless link using 128-bit
encryption.
•
256-bit: This allows an operator to encrypt traffic using either 128-bit or 256-bit encryption.
Wireless encryption can be configured for TLS RSA, TLS PSK 128-bit, or TLS PSK 256-bit
algorithms. TLS RSA uses factory installed or user-supplied RSA device certificates to authorize
remote units and agree a randomly-generated master secret. TLS RSA automatically uses the
largest key size mutually supported by licensing at the two ends of the link. TLS PSK
algorithms using a 128-bit or 256-bit pre-shared key are available only if the associated key size
is supported by licensing at both ends of the link.
AES encryption for SNMPv3 or TLS is always based on a 128-bit key, regardless of level
enabled in the PTP 670 license key.
Further reading
For information about…
Refer to…
General description of wireless encryption
in PTP 670
Wireless encryption on page 1-21
Capability upgrades for AES
Capability upgrades on page 1-60
AES and HTTPS/TLS operation
Planning for HTTPS/TLS operation on page 3-59
AES and SNMPv3 operation
Planning for SNMPv3 operation on page 3-60
How to generate an AES license key
Generating license keys on page 6-3
How to enable AES capability
Software License Key page on page 6-13
How to configure AES encryption
System Configuration page on page 6-39
How to configure security with AES
Security menu on page 6-103
Critical security parameters
The critical security parameters (CSPs) are as follows:
•
Key of keys.
•
AES encryption keys for the wireless interface.
•
Private key for the HTTPS/TLS interface.
•
Entropy value for the HTTPS/TLS interface.
•
User account passwords for the web-based interface.
•
Private key for user-supplied device certificates.
CSPs can be reset (zeroized) along with other security-related attributes using the web-based
interface.
Page 1-58
Chapter 1: Product description
System management
Further reading
For information about…
Refer to…
How to zeroize CSPs
Zeroize CSPs page on page 6-117
How to zeroize CSPs (recovery mode)
Zeroize Critical Security Parameters on page 7-83
Software upgrade
The management agent supports application software upgrade using either the web-based
interface or the SNMP interface.
PTP 670 software images are digitally signed, and the ODU will accept only images that contain
a valid Cambium Networks digital signature. The ODU always requires a reboot to complete a
software upgrade.
Note
Obtain the application software and this user guide from the support website BEFORE
warranty expires.
Caution
ODU software version must be the same at both ends of the link. Limited operation
may sometimes be possible with dissimilar software versions, but such operation is
not supported by Cambium Networks.
Caution
Take care when upgrading ODU software using the wireless link to a remote ODU.
Upgrade the remote unit first, reboot the remote ODU, and then upgrade the local
unit to the same software version.
Further reading
For information about…
Refer to…
How to upgrade the software using the web
interface
Software Upgrade page on page 6-68
How to upgrade software remotely using
Trivial FTP (TFTP) triggered by SNMP
Upgrading software using TFTP on page 6-127
Page 1-59
Chapter 1: Product description
System management
Capability upgrades
ODUs are shipped with a default License Key factory-installed. The default license key enables
a limited set of capabilities which depend upon the ODU variant.
Capability upgrades are purchased from Cambium and supplied as an Entitlement Certificate,
delivered by email. One Entitlement Certificate can deliver multiple upgrades. Follow the
instructions in the certificate to redeem the purchased upgrade products at the Cambium
Support Center.
Individual upgrades can then be activated by specifying the MAC address of a PTP 670 ODU.
For each upgrade activated, the Support Center creates a new license key and delivers it by
email. Install the license key using the ODU web interface to enable the purchased capability in
the ODU.
Note
License keys are bound to a single ODU and are not transferrable.
Further reading
For information about…
Refer to…
Capabilities of the PTP 670
Connectorized ODU
PTP 670 Connectorized ODU on page 2-5
Capabilities of the PTP 670 Integrated
ODU
PTP 670 Integrated ODU on page 2-3
Ordering capability upgrades
ODU capability upgrades on page 2-7
How to obtain License Keys
Generating license keys on page 6-3
How to install capability upgrades
Software License Key page on page 6-13
Recovery mode
The PTP 670 recovery mode provides a means to recover from serious configuration errors
including lost or forgotten passwords and unknown IP addresses.
Recovery mode also allows new main application software to be loaded even when the
integrity of the existing main application software image has been compromised. The most
likely cause of an integrity problem with the installed main application software is where the
power supply has been interrupted during an earlier software upgrade.
The ODU operates in recovery mode in the following circumstances:
•
When a checksum error occurs for the main application software image.
•
When a power on, power off, power on cycle is applied to the ODU with the power off
period being around 5sec.
Recovery mode supports a single IPv4 interface, with IP address 169.254.1.1, and with default
link settings. Recovery mode does not support IPv6.
Page 1-60
Chapter 1: Product description
System management
Note
When Recovery has been entered through a power on/off/on cycle, the ODU will revert
to normal operation if no web access has been made to the unit within 30 seconds.
This prevents the unit remaining inadvertently in recovery following a power outage.
Recovery mode options
Options in recovery mode (IPv4 only) are as follows:
•
Load new main application software.
•
Reset all configuration data. This option resets IP, Ethernet and security configuration
•
Reset IP and Ethernet configuration.
•
Reset (zeroize) critical security parameters.
•
Reboot with existing software and configuration.
If recovery mode has been entered because of a checksum error, after a 30 second wait the
ODU will attempt to reboot with existing software and configuration.
The recovery software image is installed during manufacture of the ODU and cannot be
upgraded by operators.
Further reading
For information about…
Refer to…
How to recover from configuration errors or
software image corruption
Recovery mode on page 7-77
Page 1-61
Chapter 2: System hardware
This chapter describes the hardware components of a PTP 670 link.
The following topics are described in this chapter:
•
Outdoor unit (ODU) on page 2-2
•
Power supply units (PSU) on page 2-12
•
Antennas and antenna cabling on page 2-21
•
Ethernet cabling on page 2-30
•
PTP-SYNC unit on page 2-39
•
GPS receivers on page 2-45
•
Network indoor unit (NIDU) on page 2-47
Page 2-1
Chapter 2: System hardware
Outdoor unit (ODU)
Outdoor unit (ODU)
ODU description
The ODU is a self-contained transceiver unit that houses both radio and networking electronics.
Two ODUs are required for a PTP link.
Hardware platform variants
PTP 670 ODUs are available in two different hardware platform variants:
•
PTP 670 Integrated ODU
•
PTP 670 Connectorized ODU
Regional variants
Each of the PTP 670 hardware platform variants is available in five different regional variants.
The regional variants are supplied with default country licenses as follows:
•
FCC: “USA” country license with regulatory bands:
•
38 “5.2 GHz FCC U-NII 2A”
84 “5.1 GHz FCC U-NII 1”
8 “5.4 GHz unrestricted”
35 “5.8 GHz unrestricted”
61 “4.9 GHz unrestricted”
62 “5.2 GHz unrestricted”
26 “5.4 GHz ETSI”
IC: “Canada” country license with regulatory bands:
•
14 “4.9 GHz Public Safety, USA/Canada”
EU: “EU” country license with regulatory band:
•
9 “5.4 GHz USA (New Rules)”
RoW: “Other” country license with regulatory bands:
•
1 “5.8 GHz FCC”
1 “5.8 GHz FCC”
13 “5.4 GHz FCC U-NII 2C”
14 “4.9 GHz Public Safety, USA/Canada”
38 “5.2 GHz FCC U-NII 2A”
84 “5.1 GHz FCC U-NII 1”
Mexico: “Mexico” country license:
13 “5.4 GHz Canada”
59 “5.8 GHz Mexico”
65 “5.1 GHz Colombia/Denmark/Kenya/Mexico”
68 “5.2 GHz Colombia/Mexico”
Page 2-2
Chapter 2: System hardware
Outdoor unit (ODU)
96 “4.8 GHz Mexico” (4.8 to 5.9 GHz frequency variant only)
For details of how to configure the ODUs to operate with other country licenses, refer to
Generating license keys on page 6-3 and Software License Key page on page 6-13. The list of
available countries depends upon the regional variant. The list of available regulatory bands
depends on the country.
PTP 670 Integrated ODU
The PTP 670 Integrated ODU is attached to a 23 dBi flat plate antenna (Figure 6 and Figure 7)
and is intended for medium to long-range difficult links and traditional backhaul requirements
where high capacity and high link budget are required. The integrated antenna offers a
convenient and easily-deployed solution where the additional gain of external antennas is not
needed.
Figure 6 PTP 670 (4.8 to 5.9 GHz) Integrated ODU (front and rear views)
Figure 7 PTP 670 (4.9 to 6.05 GHz) Integrated ODU (front and rear views)
Page 2-3
Chapter 2: System hardware
Outdoor unit (ODU)
Capability licensing
PTP 670 ODUs support the following capability upgrades (see ODU capability upgrades on
page 2-7):
•
SFP port operation
•
AES encryption
•
Synchronous Ethernet and 1588 Transparent Clock
•
TDM (E1 or T1) operation
•
High Capacity Multipoint (HCMP) Master
•
Over-the-air rekeying
Individual ODU part numbers
Order PTP 670 Integrated ODUs from Cambium Networks (Table 4). ODUs are supplied without
mounting brackets.
Table 4 PTP 670 Integrated individual ODU part numbers
Cambium description
Cambium part number
PTP 670 (4.9 to 6.05 GHz) Integrated 23 dBi ODU (FCC)
C050067B001A
PTP 670 (4.9 to 6.05 GHz) Integrated 23 dBi ODU (ROW)
C050067B004A
PTP 670 (4.9 to 6.05 GHz) Integrated 23 dBi ODU (EU)
C050067B007A
PTP 670 (4.9 to 6.05 GHz) Integrated 23 dBi ODU (IC)
C050067B010A
PTP 670 (4.8 to 5.9 GHz) Integrated 23 dBi ODU (Mexico)
C050067B021A
ODU kit part numbers
Order PTP 670 Integrated ODU kits from Cambium Networks (Table 5).
Each of the parts listed in Table 5 includes the following items:
•
One Integrated ODU
•
One AC Power Injector 56V or one AC+DC Enhanced Power Injector 56V PSU.
•
One line cord, either US or EU as indicated.
•
One Tilt Bracket Assembly (Figure 9).
Table 5 ODU kit part numbers for Integrated ODUs
Cambium description
Cambium part number
PTP 670 Integrated 23dBi END with AC Supply (FCC)
C050067H003A
PTP 670 Integrated 23dBi END with AC+DC Enhanced Supply (FCC)
C050067H004A
PTP 670 Integrated 23dBi END with AC Supply (ROW - U.S. Line
Cord)
C050067H009A
Page 2-4
Chapter 2: System hardware
Outdoor unit (ODU)
Cambium description
Cambium part number
PTP 670 Integrated 23dBi END with AC+DC Enhanced Supply (ROW U.S. Line Cord)
C050067H010A
PTP 670 Integrated 23dBi END with AC Supply (ROW - EU Line Cord)
C050067H015A
PTP 670 Integrated 23dBi END with AC+DC Enhanced Supply (ROW EU Line Cord)
C050067H016A
PTP 670 Integrated 23dBi END with AC Supply (EU)
C050067H021A
PTP 670 Integrated 23dBi END with AC+DC Enhanced Supply (EU)
C050067H022A
PTP 670 Integrated 23dBi END with AC Supply (IC)
C050067H027A
PTP 670 Integrated 23dBi END with AC+DC Enhanced Supply (IC)
C050067H028A
PTP 670 Connectorized ODU
The PTP 670 Connectorized ODU is intended to work with separately mounted external
antennas (Figure 8). External antennas generally have higher gains than the integrated
antennas, allowing the PTP 670 to cope with more difficult radio conditions.
Figure 8 PTP 670 Connectorized ODU (front and rear views)
Page 2-5
Chapter 2: System hardware
Outdoor unit (ODU)
Note
To determine when to install external antennas and to calculate their impact on link
performance and regulatory limits, see Planning for connectorized units on page 3-29.
To select antennas, RF cables and connectors for connectorized units, see Antennas and
antenna cabling on page 2-21.
Attention
Pour déterminer si il est nécessaire d’installer une liaison radiofréquence avec des
antennes externes et pour calculer leur impact sur les performances de la liaison et les
limites réglementaires, voir Planning for connectorized units page 3-29.
Pour sélectionner les antennes, câbles et connecteurs RF pour les liaisons
radiofréquence sans antenne intégrée, voir Antennas and antenna cabling page 2-21.
Capability licensing
PTP 670 ODUs support the following capability upgrades (see ODU capability upgrades on
page 2-7):
•
SFP port operation
•
AES encryption
•
Synchronous Ethernet and 1588 Transparent Clock
•
TDM (E1 or T1) operation
•
High-Capacity Multipoint (HCMP) Master
•
Over-the air rekeying
Individual ODU part numbers
Order PTP 670 Connectorized ODUs from Cambium Networks (Table 6). ODUs are supplied
without mounting brackets.
Table 6 PTP 670 Connectorized individual ODU part numbers
Cambium description
Cambium part number
PTP 670 (4.9 to 6.05 GHz) Connectorized ODU (FCC)
C050067B003A
PTP 670 (4.9 to 6.05 GHz) Connectorized ODU (ROW)
C050067B006A
PTP 670 (4.9 to 6.05 GHz) Connectorized ODU (EU)
C050067B009A
PTP 670 (4.9 to 6.05 GHz) Connectorized ODU (IC)
C050067B012A
PTP 670 (4.8 to 5.9 GHz) Connectorized ODU (Mexico)
C050067B022A
ODU kit part numbers
Order PTP 670 Connectorized ODU kits from Cambium Networks (Table 7).
Each of the parts listed in Table 7 includes the following items:
•
One Connectorized ODU.
Page 2-6
Chapter 2: System hardware
Outdoor unit (ODU)
•
One AC Power Injector 56V or one AC+DC Enhanced Power Injector 56V PSU.
•
One line cord, either US or EU as indicated.
•
One Tilt Bracket Assembly (Figure 9).
Table 7 ODU kit part numbers for Connectorized ODUs
Cambium description
Cambium part number
PTP 670 Connectorized END with AC Supply (FCC)
C050067H001A
PTP 670 Connectorized END with AC+DC Enhanced Supply (FCC)
C050067H002A
PTP 670 Connectorized END with AC Supply (ROW - U.S. Line Cord)
C050067H007A
PTP 670 Connectorized END with AC+DC Enhanced Supply (ROW U.S. Line Cord)
C050067H008A
PTP 670 Connectorized END with AC Supply (ROW - EU Line Cord)
C050067H013A
PTP 670 Connectorized END with AC+DC Enhanced Supply (ROW EU Line Cord)
C050067H014A
PTP 670 Connectorized END with AC Supply (EU)
C050067H019A
PTP 670 Connectorized END with AC+DC Enhanced Supply (EU)
C050067H020A
PTP 670 Connectorized END with AC Supply (IC)
C050067H025A
PTP 670 Connectorized END with AC+DC Enhanced Supply (IC)
C050067H026A
ODU capability upgrades
To upgrade a PTP 670 ODU to one or more new capabilities, order the necessary upgrades
from Cambium Networks (Table 8). For details of how to install the capability upgrades, refer to
Generating license keys on page 6-3 and Software License Key page on page 6-13.
Table 8 Capability upgrades available for PTP 670 Series ODUs
Cambium description (*1)
Part number
8-Port T1/E1 Software License (per END).
C000065K049A
PTP 650/670 128-bit AES Encryption – per ODU (*2)
C000065K018A
PTP 650/670 256-bit AES Encryption – per ODU (*2)
C000065K019A
PTP 650/670 Precise Network Timing Software License (per END)
C000065K040A
PTP 670 Basic High-Capacity Multipoint – per Access Point
C000067K001A
PTP 670 OTAR support – per END (*3)
C000067K002A
(*1) Order two upgrades per link.
(*2) Cambium Networks will supply AES upgrades only if there is official permission to export
AES encryption to the country of operation.
(*3) Order one upgrade for every ODU that will be used as a TDD Master.
Page 2-7
Chapter 2: System hardware
Outdoor unit (ODU)
ODU accessories
Spare ODU port blanking plugs are available from Cambium Networks (Table 9).
Table 9 ODU accessory part numbers
Cambium description
Cambium part number
Blanking Plug Pack (Qty 10)
N000065L036A
ODU mounting brackets
The Tilt Bracket Assembly (Figure 10) and Mounting Bracket (Integrated) bracket (Figure 9) are
used to mount a PTP 670 ODU on a pole with diameter in the range 40 mm to 80 mm
(1.6 inches to 3.1 inches). The Tilt Bracket Assembly may be used with third-party band clamps
to mount an ODU on pole with diameter in the range 90 mm to 230 mm (3.6 inches to
9.0 inches).
Order ODU mounting brackets from Cambium Networks (Table 10).
Figure 9 ODU Tilt Bracket Assembly
Page 2-8
Chapter 2: System hardware
Outdoor unit (ODU)
Figure 10 ODU Mounting Bracket (Integrated)
Table 10 ODU mounting bracket part numbers
Bracket
ODU variants
Bracket part number
Tilt Bracket Assembly
PTP 670 Integrated
N000045L002A
PTP 670 Connectorized
Mounting Bracket (Integrated)
PTP 670 Integrated
N000065L031A
ODU interfaces
The PSU, AUX and SFP ports are on the rear of the ODUs (Figure 11). These interfaces are
described in Table 11. Each of the PSU, AUX and SFP ports can be configured to disable
Ethernet traffic, connected in a local loop-back between any two ports, or selected to the
following services:
•
Data Service
•
Second Data Service
•
Management Service
•
Local Management Service
Page 2-9
Chapter 2: System hardware
Outdoor unit (ODU)
Figure 11 ODU rear interfaces
Table 11 ODU rear interfaces
Port name
Connector
Interface
Description
Main PSU
RJ45
POE input
Proprietary power over Ethernet (POE).
100/1000BASE-T
Ethernet
Management and/or data.
AUX
RJ45
100/1000BASE-T
Ethernet with
802.3at compliant
POE out capability
Auxiliary Ethernet port which can be
used, for example, to connect and
power a video camera or wireless
access point. Data and Management
Services.
SFP
SFP
Optical or Copper
Gigabit Ethernet
Data and Management Services.
Plug-in SFP module must be purchased
separately.
The front of the connectorized ODU (Figure 12) provides N type female connectors for RF cable
interfaces to antennas with horizontal (H) and vertical (V) polarization.
Figure 12 Connectorized ODU antenna interfaces
Page 2-10
Chapter 2: System hardware
Outdoor unit (ODU)
ODU specifications
The PTP 670 ODU conforms to the specifications listed in Table 12.
Table 12 ODU specifications
Category
Specification
Dimensions
Integrated: 371 mm (14.6 in) x 371 mm (14.6 in) x 81 mm (3.2 in)
Connectorized: 204 mm (8.0 in) x 318 mm (12.5 in) x 98 mm (3.9 in)
Weight
Integrated: 4.1 kg (9.0 lbs) including bracket
Connectorized: 3.1 Kg (6.8 lbs) including bracket
Temperature
-40°C (-40°F) to +60°C (140°F)
Wind loading
200 mph (323 kph) maximum. See ODU wind loading on page 3-14.
Humidity
100% condensing
Liquid and
particle ingress
IP66, IP67
UV exposure
10 year operational life (UL746C test evidence)
Static
discharge
See Electromagnetic compatibility (EMC) compliance on page 4-20
Page 2-11
Chapter 2: System hardware
Power supply units (PSU)
Power supply units (PSU)
PSU description
The PSU is an indoor unit that is connected to the ODU and network terminating equipment
using Cat5e cable with RJ45 connectors. It is also plugged into an AC or DC power supply so
that it can inject Power over Ethernet (POE) into the ODU.
Choose one of the following PSUs:
•
The AC Power Injector 56V (Figure 13) supplies a single ODU, accepts an AC input supply
only. The AC Power Injector 56V is approved for use only with the 4.9 GHz to 6.05 GHz
frequency variant of the ODU.
•
The AC+DC Enhanced Power Injector 56V (Figure 14) supplies a single ODU, accepts both
AC and DC input, tolerates a greater temperature range, and allows the ODU to support a
device on the Aux port, such as a video camera or wireless access point. It also allows the
ODU to provide DC power output. The AC+DC Power Injector 56V is approved for use with
the 4.8 GHz to 5.9 GHz, and 4.9 GHz to 6.05 GHz frequency variants of the ODU.
•
The Cluster Management Module (CMM5) (Figure 15, Figure 16 and Figure 17) is a modular
system that powers ODUs and distributes a synchronization signal to TDD Master ODUs.
CMM5 consists of the following components:
CMM5 Power and Sync Injector 56 Volts: Each Injector supplies power to up to four PTP
670 ODUs and operates from a 48 V DC input.
Optional 240 W Power Supply: An AC/DC converter with 48 V DC output. The 240 W
variant supplies power for up to four PTP 670 ODUs. Use one Power Supply for each
Power and Sync Injector.
Optional CMM5 Controller Module: The Controller Module is used to monitor and
configure a CMM5 system consisting of one or more Power and Sync Injectors,
associated Power Supplies and a UGPS receiver.
Optional Universal GPS (UGPS): An outdoor GPS receiver optimized for
synchronization. One UGPS can synchronize several Power and Sync Injectors.
Note
The CMM5 Power and Sync Injector is also available with a 29 V output. This variant is
not suitable for use with PTP 670.
Page 2-12
Chapter 2: System hardware
Power supply units (PSU)
Figure 13 AC Power Injector 56V
Figure 14 AC+DC Power Injector 56V
Page 2-13
Chapter 2: System hardware
Power supply units (PSU)
Figure 15 CMM5 Power and Sync Injector
Figure 16 CMM5 Controller
Page 2-14
Chapter 2: System hardware
Power supply units (PSU)
Figure 17 CMM5 240 watt AC/DC Power Supply
Warning
Always use an appropriately rated and approved AC supply cord-set in accordance
with the regulations of the country of use.
Caution
The PSU ODU ports are designed to connect only to PTP 670 ODUs, PTP-SYNC units,
NIDUs or LPUs. Do not connect any other equipment, as damage may occur.
Do not connect the PIDU Plus PTP 300/500/600 Series to the PTP 670 ODU or LPU.
Note
The AC Power Injector 56V is not approved for use with the 4.8 GHz to 5.9 GHz
frequency variant ODUs.
Further reading
For information about…
Refer to…
General description of TDD Synchronization
TDD synchronization on page 1-26
Further details of the CMM5
PMP Syncronization Solutions User Guide
Further details of the UGPS
PMP Syncronization Solutions User Guide
PSU part numbers
Order PSUs and (for AC power) line cords from Cambium Networks (Table 13).
Table 13 Power supply component part numbers
Cambium description
Cambium part number
AC+DC Enhanced Power Injector 56V
C000065L002C
Page 2-15
Chapter 2: System hardware
Power supply units (PSU)
Cambium description
Cambium part number
AC Power Injector 56V
N000065L001C
US Line Cord Fig 8
N000065L003A
UK Line Cord Fig 8
N000065L004A
EU Line Cord Fig 8
N000065L005A
Australia Line Cord Fig 8
N000065L006A
CMM5 Power and Sync Injector 56 Volts
C000000L556A
CMM5 240 watt AC/DC Power Supply
N000000L054B
CMM5 Controller
C000000L500A
Universal GPS
1096H
AC Power Injector 56V interfaces
The AC Power Injector 56V interfaces are shown in Figure 18 and described in Table 14.
Figure 18 AC Power Injector 56V interfaces
Table 14 AC Power Injector 56V interface functions
Interface
Function
AC power in
AC power input (main supply).
ODU
RJ45 socket for connecting Cat5e cable to ODU.
LAN
RJ45 socket for connecting Cat5e cable to network.
Power (green) LED
Power supply detection
Page 2-16
Chapter 2: System hardware
Power supply units (PSU)
AC+DC Enhanced Power Injector 56V interfaces
The AC+DC Enhanced Power Injector 56V interfaces are shown in Figure 19 and described in
Table 15.
Figure 19 AC+DC Enhanced Power Injector 56V interfaces
LEDs
AC power
input
LAN port
DC out
DC in
ODU port
LAN port
Table 15 AC+DC Enhanced Power Injector 56V interface functions
Interface
Function
AC power input
Main AC supply. 100-240V 47-63Hz 1.5A
DC In
Alternative DC power supply input.
DC Out
DC power output to a second PSU (for power supply
redundancy) or to a NIDU.
Page 2-17
Chapter 2: System hardware
Power supply units (PSU)
Interface
Function
ODU port
RJ45 socket for connecting Cat5e cable to ODU.
LAN port
RJ45 socket for connecting Cat5e cable to network.
DC Power In (green) LED
DC Power supply detection
AC Power In (green) LED
AC Power supply detection
Ethernet (yellow) LED
Ethernet traffic detection
CMM5 Power and Sync Injector interfaces
The CMM5 Power and Sync Injector interfaces are shown in Figure 20 and described in Table
16.
Figure 20 CMM5 Power and Sync Injector interfaces
Table 16 CMM5 Power and Sync Injector interface functions
Interface
Function
Primary
Primary 48 V DC power connector
Secondary
Optional secondary 48 V DC power connector
To Radios 1, 2, 3, 4
To ODUs, RJ-45 connector
To Switch Array 1, 2, 3, 4
To network, RJ-45 connector
Out
Sync signal output, RJ-12 connector
In
Sync signal input, RJ-12 connector
UGPS
Universal GPS, RJ-12 connector
USB
Connection to Controller or PC, USB Type-B Receptacle
Page 2-18
Chapter 2: System hardware
Power supply units (PSU)
PSU specifications
The AC Power Injector 56V conforms to the specifications listed in Table 17.
The AC+DC Enhanced Power Injector 56V conforms to the specifications listed in Table 18.
The CMM5 Power and Sync Injector 56 V conforms to the specifications listed in Table 19.
Table 17 AC Power Injector 56V specifications
Category
Specification
Dimensions
137 mm (5.4 in) x 56 mm (2.2 in) x 38 mm (1.5 in)
Weight
0.240 Kg (0.5 lbs)
Temperature
0°C to +40°C
Humidity
90% non-condensing
Waterproofing
Not waterproof
Altitude
Sea level to 5000 meters (16000 ft)
AC Input
Min 90 V AC, 57 – 63 Hz, max 264 V AC, 47 – 53 Hz.
DC output voltage to the ODU
55V +/- 5%
AC connector
IEC-320-C8
Efficiency
Better than 85%, efficiency level ‘V’
Over Current Protection
Hiccup current limiting, trip point set between 120% to
150% of full load current
Hold up time
At least 10 milliseconds
Table 18 AC+DC Enhanced Power Injector 56V specifications
Category
Specification
Dimensions
250 mm (9.75 in) x 40 mm (1.5 in) x 80 mm (3 in)
Weight
0.864 Kg (1.9 lbs)
Temperature
-40°C (-40°F) to +60°C (140°F)
Humidity
0 to 90% non-condensing
Waterproofing
Not waterproof
AC Input
90-264 V AC, 47-60 Hz
Alternative DC Input
37-60 V DC
DC Output Voltage
For mains input: 58 V, +2V, -0V
For DC input: Output voltage at maximum rated output
current, not more than 1.5 V below the DC input voltage.
Maximum length of DC output cable: 3 meters.
AC Input connector
IEC-320-C8
Page 2-19
Chapter 2: System hardware
Power supply units (PSU)
Category
Specification
DC Output current
1.7A
Efficiency
Better than 84%
Over Current Protection
Hiccup current limiting, trip point set between 120% to
150% of full load current
Hold up time
At least 20 milliseconds
Power factor
Better than 0.9
Table 19 CMM5 Power and Sync Injector 56 Volts specifications
Category
Specification
Dimensions
225mm (8.85 in) × 400mm (15.75 in) × 42mm (1.65 in)
Weight
3 kg (6.6 lbs)
Temperature
-40°C (-40°F) to +55°C (131°F)
Humidity
0 to 90% non-condensing
Waterproofing
Not waterproof
Input Voltage
± 48 V DC
Input Power
400 W maximum
Output Voltage
± 55 V DC
Output Current
0–1.8 A per channel
Output Power
0–90 W per channel
Power Interface Terminals
Two power input ports for 48 V DC Power
Data Interfaces
Four RJ45 Gigabit Powered output ports “To Radios”
Four RJ45 Gigabit Data input ports “To Switch Array”
One GPS timing port (RJ-12)
One CMM5 USB Serial port for local administration
One RJ12 Daisy Chain port “IN”
One RJ12 Daisy Chain port “OUT”
Surge Suppresion
Lightning Suppression for each “To Radios” RJ45 Port
Max cable length from
managed radios
100 m (328 ft)
Max cable length to GPS
Antenna
30.5 m (100 ft)
Page 2-20
Chapter 2: System hardware
Antennas and antenna cabling
Antennas and antenna cabling
Antenna requirements
Each connectorized ODU requires one external antenna (normally dual-polar), or if spatial
diversity is required, each ODU requires two antennas. These antennas are not supplied by
Cambium Networks.
For connectorized units operating in the USA 4.9 GHz, 5.1 GHz, 5.2 GHz, 5.4 GHz or 5.8 GHz
bands, choose external antennas from those listed in FCC approved antennas on page 2-22. Do
not install any other antennas.
For connectorized units operating in the Canada 4.9 GHz, 5.1 GHz, 5.2 GHz, 5.4 GHz or 5.8 GHz
bands, choose external antennas from those listed in ISEDC approved antennas on page 2-25.
Do not install any other antennas.
For links in other countries, the listed antennas are advisory, not mandatory.
Note
To determine when to install connectorized units and to calculate their impact on
link performance and regulatory limits, see Planning for connectorized units on page
3-29.
RF cable and connectors
RF cable of generic type LMR-400 is required for connecting the ODU to the antenna. N type
male connectors are required for connecting the RF cables to the connectorized ODU. Two
connectors are required per ODU. Use weatherproof connectors, preferably ones that are
supplied with adhesive lined heat shrink sleeves that are fitted over the interface between the
cable and connector. Order CNT-400 RF cable and N type male connectors from Cambium
Networks (Table 20).
Table 20 RF cable and connector part numbers
Cambium description
Cambium part number
50 Ohm Braided Coaxial Cable - 75 meter
30010194001
50 Ohm Braided Coaxial Cable - 500 meter
30010195001
RF Connector, N, Male, Straight for CNT-400 Cable
09010091001
Note
To select the correct connectors for the antenna end of the RF cable, refer to the
antenna manufacturer’s instructions.
Page 2-21
Chapter 2: System hardware
Antennas and antenna cabling
Antenna accessories
Connectorized ODUs require the following additional components:
•
Cable grounding kits: Order one cable grounding kit for each grounding point on the
antenna cables. Refer to Lightning protection unit (LPU) and grounding kit on page 2-33 for
specifications and part numbers.
•
Self-amalgamating and PVC tape: Order these items to weatherproof the RF connectors.
•
Lightning arrestors: When the connectorized ODU is mounted indoors, lightning arrestors
(not PTP 670 LPUs) are required for protecting the antenna RF cables at building entry. One
arrestor is required per antenna cable. One example of a compatible lightning arrestor is
the Polyphaser LSXL-ME or LSXL (not supplied by Cambium Networks).
FCC approved antennas
For connectorized units operating in the USA, choose external antennas from Table 21
(4.9 GHz), Table 22 (5.1 GHz), Table 23 (5.2 GHz), Table 24 (5.4 GHz) or Table 25 (5.8 GHz). These
are approved by the FCC for use with the product and are constrained by the following limits
for single- or dual-polarization parabolic dish antennas:
•
4.9 GHz – 36.0 dBi per polarization or antenna.
•
5.1 GHz – 34.5 dBi per polarization or antenna.
•
5.2 GHz – 34.5 dBi per polarization or antenna.
•
5.4 GHz – 34.5 dBi per polarization or antenna.
•
5.8 GHz – 38.1 dBi per polarization or antenna.
Caution
Antennas not included in these tables are strictly prohibited for use with the PTP 670
in the specified bands.
Table 21 Antennas permitted for deployment in USA – 4.9 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Cambium
6-foot Dual-Pol Parabolic, SPD6-4.7
36.0
RDH4502A
Cambium
6-foot Dual-Pol Parabolic, HPD6-4.7
35.8
RDH4515A
Cambium
4-foot Dual-Pol Parabolic, SPD4-4.7
33.0
RDH4501A
Cambium
4-foot Parabolic, SP4-4.7
33.0
N000000D002A
Cambium
4-foot Dual-Pol Parabolic, HPD4-4.7
32.8
RDH4516A
Cambium
3-foot Dual-Pol Parabolic, SPD3-4.7
30.4
RDH4500A
Cambium
3-foot Dual-Pol Parabolic, HPD3-4.7
30.2
RDH4517A
Cambium
2-foot Dual-Pol Parabolic, SPD2-4.7
27.0
RDH4499A
Cambium
2-foot Parabolic, SP2-4.7
26.9
N000000D001A
Page 2-22
Chapter 2: System hardware
Antennas and antenna cabling
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Cambium
2-foot Dual-Pol Parabolic, HPD2-4.7
26.8
RDH4518A
MARS
MA-WS54-50R Flat Plate (Dual-Pol)
23.0
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate (Dual-Pol)
23.0
Integrated
Cambium
1-foot Dual-Pol Parabolic, HPLPD1-4.7
20.8
RDH4519A
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector Antenna
17.0
C050000D004A
Cambium
90 Sectorized (Dual-Pol), SEC-47D-90-16
16.4
N000000D003A
Table 22 Antennas permitted for deployment in USA – 5.1 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Andrew
4-foot Dual-Pol Parabolic, PX4F-52
34.5
RDG4453B
Cambium
4FT 5GHz Single-Pol Parabolic PTP Antenna
33.9
N050067D014A
Cambium
4FT 5GHz Dual-Pol Parabolic PTP Antenna
33.6
N050067D004A
Cambium
3FT 5GHz Single-Pol Parabolic PTP Antenna
31.3
N050067D013A
Cambium
3FT 5GHz Dual-Pol Parabolic PTP Antenna
31.0
N050067D003A
Cambium
2FT 5GHz Single-Pol Parabolic PTP Antenna
27.8
N050067D012A
Cambium
2FT 5GHz Dual-Pol Parabolic PTP Antenna
27.5
N050067D002A
MARS
MA-WS54-50R Flat Plate (Dual-Pol)
23.0
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate (Dual-Pol)
23.0
Integrated
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector Antenna
17.0
C050000D004A
KPPA
KPPA-5.7-DPOMA Omni (Dual-Pol)
13.0
Table 23 Antennas permitted for deployment in USA – 5.2 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Andrew
4-foot Dual-Pol Parabolic, PX4F-52
34.5
RDG4453B
Cambium
4FT 5GHz Single-Pol Parabolic PTP Antenna
34.4
N050067D014A
Cambium
4FT 5GHz Dual-Pol Parabolic PTP Antenna
34.1
N050067D004A
Cambium
3FT 5GHz Single-Pol Parabolic PTP Antenna
32.0
N050067D013A
Cambium
3FT 5GHz Dual-Pol Parabolic PTP Antenna
31.7
N050067D003A
Cambium
2FT 5GHz Single-Pol Parabolic PTP Antenna
28.5
N050067D012A
Cambium
2FT 5GHz Dual-Pol Parabolic PTP Antenna
28.2
N050067D002A
Page 2-23
Chapter 2: System hardware
Antennas and antenna cabling
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
MARS
MA-WS54-50R Flat Plate (Dual-Pol)
23.0
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate (Dual-Pol)
23.0
Integrated
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector Antenna
17.0
C050000D004A
KPPA
KPPA-5.7-DPOMA Omni (Dual-Pol)
13.0
Table 24 Antennas permitted for deployment in USA – 5.4 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Andrew
4-foot Dual-Pol Parabolic, PX4F-52
34.5
RDG4453B
Cambium
4FT 5GHz Single-Pol Parabolic PTP Antenna
34.4
N050067D014A
Cambium
4FT 5GHz Dual-Pol Parabolic PTP Antenna
34.1
N050067D004A
Cambium
3FT 5GHz Single-Pol Parabolic PTP Antenna
32.0
N050067D013A
Cambium
3FT 5GHz Dual-Pol Parabolic PTP Antenna
31.7
N050067D003A
Cambium
2FT 5GHz Single-Pol Parabolic PTP Antenna
28.5
N050067D012A
Cambium
2FT 5GHz Dual-Pol Parabolic PTP Antenna
28.2
N050067D002A
MARS
MA-WS54-50R Flat Plate (Dual-Pol)
23.0
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate (Dual-Pol)
23.0
Integrated
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector Antenna
17.0
C050000D004A
Cambium
60 5 GHz Sector Antenna
17.0
85009325001
KPPA
KPPA-5.7-DPOMA Omni (Dual-Pol)
13.0
Table 25 Antennas permitted for deployment in USA – 5.8 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Andrew
6-foot Dual-Pol Parabolic, PX6F-52
38.1
Cambium
6FT 5GHz Single-Pol Parabolic PTP
Antenna
38.4
N050067D019A
Cambium
6FT 5GHz Dual-Pol Parabolic PTP
Antenna
37.9
RDH4506B
Andrew
4-foot Dual-Pol Parabolic, PX4F-52
35.3
RDG4453
Cambium
4FT 5GHz Single-Pol Parabolic PTP
Antenna
34.9
N050067D018A
Cambium
4FT 5GHz Dual-Pol Parabolic PTP
Antenna
34.9
RDH4505B
Page 2-24
Cambium part
number
Chapter 2: System hardware
Antennas and antenna cabling
Cambium
3FT 5GHz Single-Pol Parabolic PTP
Antenna
32.5
RDH4513B
Cambium
3FT 5GHz Dual-Pol Parabolic PTP
Antenna
32.3
RDH4504B
Cambium
2FT 5GHz Single-Pol Parabolic PTP
Antenna
29
N050067D017A
Cambium
2FT 5GHz Dual-Pol Parabolic PTP
Antenna
28.8
RDH4503B
MARS
MA-WS54-50R Flat Plate (Dual-Pol)
23
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate
(Dual-Pol)
23
Integrated
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector
Antenna
17
A005365
Cambium
90 5 GHz Sector Antenna
17
85009324001
KPPA
KPPA-5.7-DPOMA Omni (Dual-Pol)
13
ISEDC approved antennas
For connectorized units operating in Canada, choose external antennas from Table 26
(4.9 GHz), Table 27 (5.1 GHz), Table 28 (5.2 GHz), Table 29 (5.4 GHz) or Table 30 (5.8 GHz). These
are approved by ISEDC for use with the product and are constrained by the following limits for
single- or dual-polarization parabolic dish antennas:
•
4.9 GHz – 36.0 dBi per polarization or antenna.
•
5.1 GHz – 34.5 dBi per polarization or antenna.
•
5.2 GHz – 34.5 dBi per polarization or antenna.
•
5.4 GHz – 34.5 dBi per polarization or antenna.
•
5.8 GHz – 35.3 dBi per polarization or antenna.
Caution
Antennas not included in these tables are strictly prohibited for use with the PTP 670
in the specified bands.
Caution
This radio transmitter (ISEDC certification number 109AO-45700) has been approved
by ISEDC to operate with the antenna types listed below with the maximum
permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
Page 2-25
Chapter 2: System hardware
Antennas and antenna cabling
Antennes approuvées par ISDEC
Pour les unités sans antenne intégrée destinées au Canada, choisissez des antennes externes
dans la list ci-dessous. Ces antennes paraboliques a polarisation simple ou double sont
approuvées par ISDEC pour une utilisation avec le produit comme suit:
•
4.9 GHz – 36.0 dBi par polarisation maximum.
•
5.1 GHz – 34.5 dBi par polarisation maximum.
•
5.2 GHz – 34.5 dBi par polarisation maximum.
•
5.4 GHz – 34.5 dBi par polarisation maximum.
•
5.8 GHz – 35.3 dBi par polarisation maximum.
Attention
Les antennes qui ne sont pas listées dans ces tableaux sont strictement interdites
d’utilisation avec le PTP 670 dans les bandes spécifiées
Attention
Le présent émetteur radio (Numéro de certification ISDEC 109AO-45700) a été
approuvé par ISDEC pour fonctionner avec les types d'antenne énumérés ci-dessous
et ayant un gain admissible maximal et l'impédance requise pour chaque type
d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est
supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.
Table 26 Antennas permitted for deployment in Canada – 4.9 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Cambium
6-foot Dual-Pol Parabolic, SPD6-4.7
36.0
RDH4502A
Cambium
6-foot Dual-Pol Parabolic, HPD6-4.7
35.8
RDH4515A
Cambium
4-foot Dual-Pol Parabolic, SPD4-4.7
33.0
RDH4501A
Cambium
4-foot Parabolic, SP4-4.7
33.0
N000000D002A
Cambium
4-foot Dual-Pol Parabolic, HPD4-4.7
32.8
RDH4516A
Cambium
3-foot Dual-Pol Parabolic, SPD3-4.7
30.4
RDH4500A
Cambium
3-foot Dual-Pol Parabolic, HPD3-4.7
30.2
RDH4517A
Cambium
2-foot Dual-Pol Parabolic, SPD2-4.7
27.0
RDH4499A
Cambium
2-foot Parabolic, SP2-4.7
26.9
N000000D001A
Cambium
2-foot Dual-Pol Parabolic, HPD2-4.7
26.8
RDH4518A
MARS
MA-WS54-50R Flat Plate (Dual-Pol)
23.0
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate (Dual-Pol)
23.0
Integrated
Cambium
1-foot Dual-Pol Parabolic, HPLPD1-4.7
20.8
RDH4519A
Page 2-26
Chapter 2: System hardware
Antennas and antenna cabling
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector Antenna
17.0
C050000D004A
Cambium
90 Sectorized (Dual-Pol), SEC-47D-90-16
16.4
N000000D003A
Table 27 Antennas permitted for deployment in Canada – 5.1 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Andrew
4-foot Dual-Pol Parabolic, PX4F-52
34.5
RDG4453B
Cambium
4FT 5GHz Single-Pol Parabolic PTP Antenna
33.9
N050067D014A
Cambium
4FT 5GHz Dual-Pol Parabolic PTP Antenna
33.6
N050067D004A
Cambium
3FT 5GHz Single-Pol Parabolic PTP Antenna
31.3
N050067D013A
Cambium
3FT 5GHz Dual-Pol Parabolic PTP Antenna
31.0
N050067D003A
Cambium
2FT 5GHz Single-Pol Parabolic PTP Antenna
27.8
N050067D012A
Cambium
2FT 5GHz Dual-Pol Parabolic PTP Antenna
27.5
N050067D002A
MARS
MA-WS54-50R Flat Plate (Dual-Pol)
23.0
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate (Dual-Pol)
23.0
Integrated
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector Antenna
17.0
C050000D004A
Cambium
60 5 GHz Sector Antenna
17.0
85009325001
KPPA
KPPA-5.7-DPOMA Omni (Dual-Pol)
13.0
Table 28 Antennas permitted for deployment in Canada – 5.2 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Andrew
4-foot Dual-Pol Parabolic, PX4F-52
34.5
RDG4453B
Cambium
4FT 5GHz Single-Pol Parabolic PTP Antenna
34.4
N050067D014A
Cambium
4FT 5GHz Dual-Pol Parabolic PTP Antenna
34.1
N050067D004A
Cambium
3FT 5GHz Single-Pol Parabolic PTP Antenna
32.0
N050067D013A
Cambium
3FT 5GHz Dual-Pol Parabolic PTP Antenna
31.7
N050067D003A
Cambium
2FT 5GHz Single-Pol Parabolic PTP Antenna
28.5
N050067D012A
Cambium
2FT 5GHz Dual-Pol Parabolic PTP Antenna
28.2
N050067D002A
MARS
MA-WS54-50R Flat Plate (Dual-Pol)
23.0
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate (Dual-Pol)
23.0
Integrated
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector Antenna
17.0
C050000D004A
Page 2-27
Chapter 2: System hardware
Antennas and antenna cabling
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Cambium
60 5 GHz Sector Antenna
17.0
85009325001
KPPA
KPPA-5.7-DPOMA Omni (Dual-Pol)
13.0
Table 29 Antennas permitted for deployment in Canada – 5.4 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Andrew
4-foot Dual-Pol Parabolic, PX4F-52
34.5
RDG4453B
Cambium
4FT 5GHz Single-Pol Parabolic PTP Antenna
34.4
N050067D014A
Cambium
4FT 5GHz Dual-Pol Parabolic PTP Antenna
34.1
N050067D004A
Cambium
3FT 5GHz Single-Pol Parabolic PTP Antenna
32.0
N050067D013A
Cambium
3FT 5GHz Dual-Pol Parabolic PTP Antenna
31.7
N050067D003A
Cambium
2FT 5GHz Single-Pol Parabolic PTP Antenna
28.5
N050067D012A
Cambium
2FT 5GHz Dual-Pol Parabolic PTP Antenna
28.2
N050067D002A
MARS
MA-WS54-50R Flat Plate (Dual-Pol)
23.0
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate (Dual-Pol)
23.0
Integrated
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector Antenna
17.0
C050000D004A
Cambium
60 5 GHz Sector Antenna
17.0
85009325001
KPPA
KPPA-5.7-DPOMA Omni (Dual-Pol)
13.0
Table 30 Antennas permitted for deployment in Canada – 5.8 GHz
Manufacturer
Antenna type
Nominal
gain (dBi)
Cambium part
number
Andrew
4-foot Dual-Pol Parabolic, PX4F-52
35.3
RDG4453
Cambium
4FT 5GHz Single-Pol Parabolic
PTP Antenna
34.9
N050067D018A
Cambium
4FT 5GHz Dual-Pol Parabolic PTP
Antenna
34.9
RDH4505B
Cambium
3FT 5GHz Single-Pol Parabolic
PTP Antenna
32.5
RDH4513B
Cambium
3FT 5GHz Dual-Pol Parabolic PTP
Antenna
32.3
RDH4504B
Cambium
2FT 5GHz Single-Pol Parabolic
PTP Antenna
29
N050067D017A
Cambium
2FT 5GHz Dual-Pol Parabolic PTP
Antenna
28.8
RDH4503B
Page 2-28
Chapter 2: System hardware
Antennas and antenna cabling
MARS
MA-WS54-50R Flat Plate (DualPol)
23
Integrated
MARS
MA-WA56-DP23G7CM Flat Plate
(Dual-Pol)
23
Integrated
Cambium
90 4.9 - 6 GHz, 90/120 deg Sector
Antenna
17
A005365
Cambium
90 5 GHz Sector Antenna
17
85009324001
KPPA
KPPA-5.7-DPOMA Omni (Dual-Pol)
13
Page 2-29
Chapter 2: System hardware
Ethernet cabling
Ethernet cabling
Ethernet standards and cable lengths
All configurations require a copper Ethernet connection from the ODU (PSU port) to the PSU.
Advanced configurations may also require one or both of the following:
•
A copper Ethernet connection from the ODU (Aux port) to an auxiliary device.
•
An optical or copper Ethernet connection from the ODU (SFP port) to network terminating
equipment or a linked ODU.
Table 31 specifies, for each type of PSU and power supply, the maximum permitted PSU drop
cable length.
Table 32 specifies, for Aux and copper SFP interfaces, the Ethernet standards supported and
the maximum permitted drop cable lengths.
Note
For optical SFP interfaces, refer to SFP module kits on page 2-36 for details of the
Ethernet standards supported and maximum permitted cable lengths.
Table 31 PSU drop cable length restrictions
Type of PSU
installed
Power supply
to PSU
Ethernet
supported (*1)
Power output to
auxiliary device
Maximum cable
length (*2)
AC Power
Injector 56V
AC mains
100BASE-TX
1000BASE-T
No
100 m (330 ft)
AC+DC
Enhanced
Power Injector
56V
AC mains
No (*3)
No
300 m (990 ft)
48 V dc
No (*3)
No
300 m (990 ft)
AC mains
100BASE-TX
1000BASE-T
Yes
100 m (330 ft)
48 V dc
100BASE-TX
1000BASE-T
Yes
100 m (330 ft)
48 V dc
100BASE-TX
1000BASE-T
Yes
100 m (330 ft)
CMM5 Power
and Sync
Injector
(*1) 10BASE-T is not supported by PTP 670.
(*2) Maximum length of Ethernet cable from ODU to network terminating equipment via PSU.
(*3) Ethernet is provided via optical SFP interface.
Page 2-30
Chapter 2: System hardware
Ethernet cabling
Table 32 Aux and copper SFP Ethernet standards and cable length restrictions
ODU drop cable
Power over Ethernet
Ethernet supported
(*1)
Maximum cable
length (*2)
Aux – auxiliary device
POE to auxiliary
device
100BASE-TX
1000BASE-T
100 m (330 ft)
None
100BASE-TX
100 m (330 ft)
None
100BASE-TX
100 m (330 ft)
SFP (copper) – linked device
(*1) 10BASE-T is not supported by PTP 670.
(*2) Maximum length of Ethernet cable from the ODU to the linked device.
Outdoor copper Cat5e Ethernet cable
For copper Cat5e Ethernet connections from the ODU to the PSU, LPUs and other devices, use
Cat5e cable that is gel-filled and shielded with copper-plated steel, for example Superior Essex
type BBDGe. This is known as “drop cable” (Figure 21).
Caution
Always use Cat5e cable that is gel-filled and shielded with copper-plated steel.
Alternative types of drop cable are not supported by Cambium Networks for the PTP
670.
Order Superior Essex type BBDGe cable from Cambium Networks (Table 33). Other lengths of
this cable are available from Superior Essex.
Figure 21 Outdoor drop cable
Page 2-31
Chapter 2: System hardware
Ethernet cabling
Table 33 Drop cable part numbers
Cambium description
Cambium part number
1000 ft Reel Outdoor Copper Clad CAT5E
WB3175
328 ft (100 m) Reel Outdoor Copper Clad CAT5E
WB3176
Cable grounding kit
Copper drop cable shields must be bonded to the grounding system in order to prevent
lightning creating a potential difference between the structure and cable, which could cause
arcing, resulting in fire risk and damage to equipment. Optical cables do not require grounding.
One grounding kit (Figure 22) is required for each grounding point on the PSU, Aux and copper
SFP drop cables. Order cable grounding kits from Cambium Networks (Figure 30).
Caution
To provide adequate protection, all grounding cables must be a minimum size of 10
mm2 csa (8AWG), preferably 16 mm2 csa (6AWG), or 25 mm2 csa (4AWG).
Figure 22 Cable grounding kit
Table 34 Cable grounding kit part numbers
Cambium description
Cambium part number
Cable Grounding Kits For 1/4" And 3/8" Cable
01010419001
Page 2-32
Chapter 2: System hardware
Ethernet cabling
Lightning protection unit (LPU) and grounding kit
LPUs provide transient voltage surge suppression for PTP 670 installations. Each PSU or Aux
drop cable requires two LPUs, one near the ODU and the other near the linked device, usually
at the building entry point (Table 35).
Table 35 LPU and grounding kit contents
Lightning protection units (LPUs)
LPU grounding point nuts and washers
ODU to top LPU drop cable (600 mm)
EMC strain relief cable glands
U-bolts, nuts and washers for mounting LPUs
ODU to top LPU ground cable (M6-M6)
Bottom LPU ground cable (M6-M10)
ODU to ground cable (M6-M10
Page 2-33
Chapter 2: System hardware
Ethernet cabling
One LPU and grounding kit (Table 35) is required for the PSU drop cable connection to the
ODU. If the ODU is to be connected to an auxiliary device, one additional LPU and grounding
kit is required for the Aux drop cable. Order the kits from Cambium Networks (Table 36).
Table 36 LPU and grounding kit part number
Cambium description
Cambium part number
LPU and Grounding Kit (One Kit Per End)
C000065L007A
Note
LPUs are not suitable for installation on SFP copper Cat5e Ethernet interfaces. For
SFP drop cables, obtain suitable surge protectors from a specialist supplier.
SFP optical Ethernet interfaces do not require surge protectors.
LPU for GPS drop cables
When a GPS receiver is the timing reference source for PTP-SYNC (optional), an LPU must be
installed near the point at which the GPS drop cable enters the building. A single LPU from the
LPU and Grounding Kit (C000065L007A) (Table 35) is suitable. Alternatively, the single LPU kit
for PTP 250/300/500 (Figure 23) could be used.
Figure 23 LPU kit used for GPS receiver drop cables
Page 2-34
Chapter 2: System hardware
Ethernet cabling
Table 37 LPU and grounding kit part number – Use with GPS receiver drop cable only
Cambium description
Cambium part number
LPU End Kit PTP 250/300/500
WB2978
RJ45 connectors and spare glands
RJ45 connectors are required for plugging Cat5e cables into ODUs, LPUs, PSUs and other
devices. Order RJ45 connectors and crimp tool from Cambium Networks (Table 38).
Note
The RJ45 connectors and crimp tool listed in Table 38 work with Superior Essex type
BBDGe cable (as supplied by Cambium Networks). They may not work with other
types of cable.
The ODU is supplied with one environmental sealing gland for the drop cable. However, this is
not suitable when surge protection is required: EMC glands must be used instead. EMC strain
relief cable glands (quantity 5) are included in the LPU and grounding kit (Figure 24). These are
identified with a black sealing nut. If extra glands are required, order them from Cambium
Networks (in packs of 10) (Table 38).
One long EMC strain relief gland (Figure 27) is included in each SFP module kit. This is longer
than the standard cable gland as it must house an SFP module plugged into the ODU.
Figure 24 Cable gland
Table 38 RJ45 connector and spare gland part numbers
Cambium description
Cambium part number
Tyco/AMP, Mod Plug RJ45 Unscreened, 100 pack
WB3177
Tyco/AMP Crimp Tool
WB3211
RJ-45 Spare Grounding Gland - PG16 size (Qty. 10)
N000065L033
Cable hoisting grip
One or more grips are required for hoisting the drop cable up to the ODU without damaging
the gland or RJ45 plug (Figure 25). They are not supplied by Cambium Networks.
Page 2-35
Chapter 2: System hardware
Ethernet cabling
Figure 25 Cable hoisting grip
Indoor Cat5e cable
To connect the PSU to network terminating equipment, use indoor Cat5e cable. The ODU
network connection implements automatic MDI/MDI-X sensing and pair swapping, allowing
connection to networking equipment that requires cross-over cables (MDI-X networks) or
straight-through cables (MDI Networks).
SFP module kits
SFP module kits allow connection of a PTP 670 Series ODU to a network over a Gigabit
Ethernet interface in one of the following full-duplex modes:
•
Optical Gigabit Ethernet: 1000BASE-LX or 1000BASE-SX
•
Copper Gigabit Ethernet: 100BASE-TX or 1000BASE-T
Order SFP module kits from Cambium Networks (Table 39).
Table 39 SFP module kit part numbers
Cambium description
Cambium part number
Single Mode Optical SFP Interface per ODU
C000065L008A
Multi-mode Optical SFP Interface per ODU
C000065L009A
Gig-Ethernet SFP Interface per ODU
C000065L010A
To compare the capabilities of the two optical SFP modules, refer to Table 40 and Table 41.
Table 40 Single Mode Optical SFP Interface (part number C000065L008A)
Core/
cladding
(microns)
Mode
Bandwidth at
1310 nm
(MHz/km)
Maximum
length of optical
interface
Insertion loss
(dB)
62.5/125
Multi
500
550 m (1800 ft)
2.35
50/125
Multi
400
550 m (1800 ft)
2.35
50/125
Multi
500
550 m (1800 ft)
2.35
10/125
Single
N/A
5000 m (16400 ft)
4.57
Page 2-36
Chapter 2: System hardware
Ethernet cabling
Table 41 Multi-mode Optical SFP Interface (part number C000065L009A)
Core/
cladding
(microns)
Mode
Bandwidth at
850 nm (MHz/km)
Maximum
length of optical
interface
Insertion loss
(dB)
62.5/125
Multi
160
220 m (720 ft)
2.38
62.5/125
Multi
200
275 m (900 ft)
2.6
50/125
Multi
400
500 m (1640 ft)
3.37
50/125
Multi
500
550 m (1800 ft)
3.56
The upgrade kits contain the following components:
•
Optical or copper SFP transceiver module (Figure 26)
•
Long EMC strain relief cable gland (Figure 27)
•
The Ethernet SFP Module Installation Guide
•
License key instructions and unique Access Key
Figure 26 Optical or copper SFP transceiver module
Figure 27 Long cable gland
Note
PTP 670 does not support the Synchronous Ethernet or 1588 Transparent Clock
features using copper SFP transceivers.
Page 2-37

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Modify Date                     : 2018:04:24 18:13:35+01:00
Create Date                     : 2018:04:24 18:13:31+01:00
Metadata Date                   : 2018:04:24 18:13:35+01:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Format                          : application/pdf
Title                           : PTP 670 Series User Guide
Description                     : phn-4431 004v000
Creator                         : Cambium Networks
Document ID                     : uuid:9e1d7d15-753d-4150-a3b9-6d3681331964
Instance ID                     : uuid:003619b7-8c4b-4dbe-973c-634770a74449
Producer                        : Adobe PDF Library 11.0
A4 Date                         : Jan 2011
A4 Ordno                        : phn-1863_001v001
Company                         : Cambium Networks
Page Count                      : 122
Author                          : Cambium Networks
Subject                         : phn-4431 004v000
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QWP-50670

Navigation menu