Cambium Networks 89FT0015 Dual Channel OFDM MIMO/SISO Transceiver User Manual Exhibit D Users Manual per 2 1033 b3

Cambium Networks Inc. Dual Channel OFDM MIMO/SISO Transceiver Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

Download: Cambium Networks 89FT0015 Dual Channel OFDM MIMO/SISO Transceiver User Manual Exhibit D Users Manual per 2 1033 b3
Mirror Download [FCC.gov]Cambium Networks 89FT0015 Dual Channel OFDM MIMO/SISO Transceiver User Manual Exhibit D Users Manual per 2 1033 b3
Document ID2598341
Application IDLyLT5RfVcL0G7jjCdqmryg==
Document DescriptionExhibit D Users Manual per 2 1033 b3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize426.11kB (5326382 bits)
Date Submitted2015-04-28 00:00:00
Date Available2015-04-29 00:00:00
Creation Date2015-04-27 12:58:02
Producing SoftwareAdobe PDF Library 11.0
Document Lastmod2015-04-27 12:58:03
Document TitleExhibit D Users Manual per 2 1033 b3
Document CreatorAcrobat PDFMaker 11 for Word
Document Author: Savich Ray-G3730C

Cambium Fixed Outdoor Radio Module Assembly instructions for Professional Installers
FCC Band 5725-5850MHz
1. Insert FCCID: Z8H89FT0015 into center slot of Cambium 24dBi Reflector Dish.
2. Connect and secure alignment bracket with center screw to back of dish radio assembly.
3. Connect and secure 4 screws through front of dish to bracket enclosure.
4. Plug in Ethernet cable from POE injector to power the device:
a. Connect via computer to IP address 169.254.1.1
b. Login to radio via GUI
c. Enter password
i. Contains FCCid (Z8H89FT0015) is visible on the GUI system tab and not
alterable by third parties
ii. United States region code is also Locked and visible on the monitor/wireless tab
Factory programming above is secure, locked and not alterable by any third parties.
Parameters below may be changed by professional installers.
d. Select Configuration / Radio tab on GUI:
i. Enter antenna gain 24dBi for dish.
ii. Select carrier frequency 5800MHz or alternate frequency as desired within
certified range. DTS Band (5725MHz -5850MHz)
iii. Set channel bandwidth: widest 40MHz, narrowest bandwidth 5MHz.
iv. Select combined power in dBm (from -24 up to 29)
v. Select up to the maximum DL/UL ratio 75/25
vi. Save configuration by clicking the save icon
5. Install complete assembly at final location.
To comply with FCC and Industry Canada RF radiation exposure limits for general population, the
antenna(s) used for this transmitter must be installed such that a minimum separation distance of 1.32m
is maintained between the radiator (antenna) and all persons at all times and must not be co-located or
operating in conjunction with any other antenna or transmitter.
This Cambium module has been certified under the following conditions:
1) The antennas must be installed such that a minimum separation distance of 1.32m is maintained
between the antenna and all persons at all times.
2) The transmitter module must not be co-located or operating in conjunction with any other antenna
or transmitter.
If these conditions are met then further testing will not be required.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Review the user manual for antenna information and safe minimum R.F. exposure distances.
End Product Labelling:
The Cambium Module is labelled with its own FCC ID. If the FCC ID is not visible when the module is
installed inside another device, then the outside of the device into which the module is installed must also
display a label referring to the enclosed module. In that case, the final end product must be labelled in a
visible area with the following:
Contains Transmitter Module FCC ID: Z8H89ft0015” or “Contains FCC ID: Z8H-89ft0015”
The OEM of the Cambium Module must only use the approved antenna(s) listed in the user
manual, which have been certified with this module.
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module or change RF related parameters in the user manual of
the end product.
For more information goto: www.cambiumnetworks.com

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Savich Ray-G3730C
Create Date                     : 2015:04:27 12:58:02-05:00
Modify Date                     : 2015:04:27 12:58:03-05:00
Language                        : EN-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:04:27 12:58:03-05:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Document ID                     : uuid:42763fcb-ab74-4a23-b999-fb4353f52ba2
Instance ID                     : uuid:9e9e08d8-8d73-4d3b-8791-f2b4c57e38ad
Subject                         : 2
Format                          : application/pdf
Creator                         : Savich Ray-G3730C
Producer                        : Adobe PDF Library 11.0
Source Modified                 : D:20150427175741
Company                         : Motorola
Tag Ad Hoc Review Cycle ID      : -481837581
Tag New Review Cycle            : 
Tag Email Subject               : letterhead
Tag Author Email                : matt.mangriotis@cambiumnetworks.com
Tag Author Email Display Name   : Mangriotis Matt-W16867
Tag Previous Ad Hoc Review Cycle ID: -1037154258
Tag Reviewing Tools Shown Once  : 
Page Layout                     : OneColumn
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Z8H89FT0015

Navigation menu