Cambium Networks 89FT0027 E700 User Manual
Cambium Networks Inc. E700
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3869092 |
| Application ID | 18zY0w3FOmMeDPzgsL4low== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 37.14kB (464230 bits) |
| Date Submitted | 2018-05-30 00:00:00 |
| Date Available | 2018-06-04 00:00:00 |
| Creation Date | 2018-05-16 16:10:25 |
| Producing Software | TurboPDF Printer Version 9.0.1.1109 |
| Document Lastmod | 2018-05-16 16:22:32 |
| Document Title | User Manual |
| Document Creator | Adobe Acrobat Pro 2017 17.11.30079 |
Outdoor 1. Connect the Ethernet cable from Ethl/PoE-IN of e700 to the PoE 1. Select Properties for the Ethernet port. In Windows it is found in Area Connection. 2. Connect an Ethernet cable from your LAN or Computer to the username: admin and password: admin 2. 4 Local Area Connection Properties 3. Navnxking Authentication | Sharing Connect using: Gigabit Data port of the PoE adapter. £ CaetQM ... This connection uses the fdowung items 0 ' Qert for Microsoft Networks 0 J§ Jun«r Network Service 0 JSjOoS Packet Scheduler 2. Punter Sharing for Microsoft Networks Hemet Protocol Ver»on S (TCP/lPv6) Hemet Protocol Version 4 (TCP/lPv 4) Configure the Carrier Frequency . Click the ‘GoTo Next Page’. 5. Select the Synchronization source. Click the ‘GoTo Next Page’. 6. Configuration - IP Address, a Subnet Mask, and a Gateway IP IP Address Configuration System LED 7. Internet Protocol Version 4 (TCP/IPv4) Properties CD mask, and gateway IP address automatically configured by a DHCP server. Click the ‘Go To Next Page’. is no DHCP server Cord into a power outlet . Reset E Address OR DHCP state to Enabled to have the IP address, subnet cnPilot e700 will use a default static IP address of 192.168. 0.1, If there Connect the Power Cord to the adapter , and then plug the Power Configure your Region and Country of operation. Click the ‘GoTo 4. Default IP address received via DHCP. 3. Navigate to the Quick Start menu and click the ‘GoTo Next Page’. Next Page’. IntetfR) Ethernet Connection 1217-LM Hardware Overview Using a web browser, navigate to 169.254.1.1 and login with 1. Control Panel > Network and Internet > Network Connections > Local port of Gigabit Data + Power Hardware Overview Quick Link Setup Configure Management PC Powering Up Main Port Click the ‘Save Changes’ button. Click the ‘Reboot ’ button. General Secondary Port You car get IP settings assigned automatically if your network supports this capability Otherwise, you need to ask your network administrator for tho appropriate IP settings Network LED Obtain an IP address automatically 9i Use the following IP address: IP address: Secondary Port The Secondary port is a Gigabit Ethernet port used for bridging. Reset Subnet mask: Default gateway : LED Colour 3. Default Login information - Username: admin Once powered ON — Power LED should illuminate continuously on PoE Adapter. Status Indication System LED colour is " Amber ” Management Protocols enabled by default -http or https ( webpage System LED colour is " Green" — E 700 is fully powered Network LED colour is " Amber" — E700 is not connected to cnMaestro Network LED colour is "Blue" Model: cnPilot e700 Weight with Mounting Kit 3.74 lbs. (1700 grams) Networking Interface 10/100/1000 Mbps Ethernet ports (Two RJ45s) Operating Frequency 2.4 GHz 5 GHz Bluetooth 2412 - 2472 MHz 5180 - 5850 MHz 2402 - 2480 MHz Antenna Gain 7.8 dBi ( 2.4 GHz ) and 7.8 dBi ( 5 GHz ) Beamwidth 360 Omni directional Max Power Consumption Max TX Power (Conducted * ) 2.4 GHz 5 GHz Bluetooth Power Supply FCC Compliance E 700 is connected to cnMaestro Operating Modes Wireless Client Connectivity, Mesh Mounting Wall/Poie ( Kits included) Supported Pole Size 38.1 to 76.2 ( mm) 1.5" to 3.0" (Inch) IP Rating IP 67 (completely protected from dust and can also withstand being submerged in lm of static water for up to 30 minutes) Operating Temperature Operating Humidity 5-95% Noncondensing Certification CE, FCC, 1C 40°C to +65°C Le present appareil est conforme aux CNR d' lndustrie Canada applicables aux appareils radio ex that this product should be disposed of separately from regular household waste streams. It is your licence. L'exploitation est autorisee aux deux conditions suivantes : (1) 1' appareil ne doit pas proc will not occur in a particular installation. If this equipment does cause harmful interference to radio or responsibility to dispose of this and other electric and electronic equipment via designated collection brouillage, et (2) I' utilisateur de /' appareil doit accepter tout brouillage radioelectrique subi, men brouillage est susceptible d'en compromettre le fonctionnement. facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed 3. WPA / WPA 2 Pre-shared keys, WPA 2 Enterprise and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates cause harmful interference to radio communications. However, there is no guarantee that interference encouraged to try to correct the interference by one of the following measures: 56V/60 W Gigabit passive PoE Adapter or 802.3at PSE Wireless Security radiate radio frequency energy and, if not installed and used in accordance with the instructions, may following two conditions: (1) this device may not cause interference, and (2) this device must a television reception, which can be determined by turning the equipment off and on, the user is 2. 802.11a / b /g /n/ac interference, including interference that may cause undesired operation of the device. l. 25 dBm 28 dBm 9 dBm There are no serviceable parts inside this equipment. Service should be provided only by a qualified service technician. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet. b. c. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2- wire outlet as this will defeat the continuity of the grounding wire. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment Reorient or relocate the receiving antenna. information about the disposal of your old equipment, please contact your local authorities, waste For product available in the USA / Canada market, only channel 1- 11 can be operated. Selection < Increase the separation between the equipment and receiver. disposal service, or the shop where you purchased the product. channels is not possible. CE Marking Selection d' autres canaux n'est pas possible. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. IMPORTANT NOTE: FCC Caution: Any changes or modifications not expressly approved by the party responsible for This equipment should be installed and operated with minimum distance 20cm between the radiator 1C Radiation Exposure Statement: compliance could void the user’s authority to operate this equipment. & your body. * Regulatory dependent e. Protective bonding must be installed in accordance with local national wiring rules and regulations. This equipment complies with 1 C RSS-102 radiation exposure limits set forth for an uncontrollec environment. This equipment should be installed and operated with minimum distance 28 cm t This device complies with Part 15 of the FCC Rules. Operation is subject to the following two All operational modes: radiator & your body. conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 2.4 GHz: 802.11b, 802.11g, 802.11n (HT 20), 802.11n (HT 40) Cet equipement est conforme aux limites d'exposition aux rayonnements 1C etablies pour un en\ interference received, including interference that may cause undesired operation. 5 GHz: 802.11a, 802.11ac ( VHT 20), 802.11ac ( VHT 40), 802.11ac ( VHT 80) For product available in the USA /Canada market, only channel 1- 11 can be operated. Selection of other non controle. Cet equipement doit etre installe et utilise avec un minimum de 28 cm de distance source de rayonnement et votre corps. channels is not possible. The frequency, mode and the maximum transmitted power in EU are listed below: Professional installation is required. 2412 -2472MHZ (802.11n HT 40 MCSO): 18.48 dBm 5500- 5700 MHZ (802.11ac VHT 80 MCSO/ NssI): 28.14 dBm IMPORTANT NOTE: Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short - circuit backup protection. Pour les produits disponibles aux Etats -Unis / Canada du marche, seul le canal 1 a 77 peuvent etre Consult the dealer or an experienced radio/ TV technician for help. d. 1C Statement European Directive 2002/96/EC requires that the equipment bearing this symbol on the product against harmful interference in a residential installation. This equipment generates, uses and can Electrical Safety Information 24.5 W, 37.5 W ( with Auxiliary device powered) The Main port is a Gigabit Ethernet port used to connect the power This device complies with Industry Canada license-exempt RSS standard( s). Operation is subje This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection Compliance with manufacturer ’s label for voltage, frequency, and current requirements. Connecting to a different power source than those specified may result in improper operation, damage to equipment or pose a fire hazard if the limitations are not followed. Main Port Caring for the Environment: RoHS/WEEE Warning: ° Wi-Fi Standards RoHS/WEEE/CE Compliance To prevent loss of life or physical injury , observe the following safety guidelines. In no event shall Cambium Networks be liable for any injury or damage caused during the installation of e700 platform. Ensure that only qualified personnel install. Only use attachments/accessories specified by the manufacturer. To restore to factory default settings, press and hold the should be connected to the LAN and DHCP server. Safety Notice 315 x 215 x 66mm Reset button for more than 10 seconds. **Shielded Category 5 (or above ) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE. Product Dimension - To restart, press and release the Reset button quickly. Password: admin management interface access), SSH ( CLI management interface access). Specifications The Reset button serves two functions for e700: E700 is Powering up (Initializing) 5745 - 5825 MHz (802.11ac ( VHT 20)-( ChS-20 MHz ): 28.04 dBm FCC Radiation Exposure Statement: Online Resources User Guide and software downloads: https:// support.cambiumnetworks.com/ files/e 700/ This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Hereby, [ Cambium Networks Inc.] declares that the radio equipment type [cnPilot e700 ] is in Support: This equipment should be installed and operated with minimum distance compliance with Directive 2014/ 53/ EU. http://www.cambiumnetworks.com/support/ your body. cm the radiator & C © Contact us: http:// www.cambiumnetworks.com/support/contact - support/
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Create Date : 2018:05:16 16:10:25+08:00 Creator : Adobe Acrobat Pro 2017 17.11.30079 Modify Date : 2018:05:16 16:22:32+08:00 Subject : Title : Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2018:05:16 16:22:32+08:00 Creator Tool : Adobe Acrobat Pro 2017 17.11.30079 Format : application/pdf Document ID : uuid:25fbf0f9-eca4-4bb1-a294-24591f2841f2 Instance ID : uuid:d372f0ef-cf11-4693-a885-fa4513b4953e Producer : TurboPDF Printer Version 9.0.1.1109 Page Count : 2EXIF Metadata provided by EXIF.tools