Cambium Networks XIAC3470 802.11abgn/ac module User Manual aos AppNotices

Download:
Mirror Download [FCC.gov]
Document ID	2910168
Application ID	tEKr9c78GWY7K1pThQJ36g==
Document Description	Notices to User
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.63kB (357908 bits)
Date Submitted	2016-02-24 00:00:00
Date Available	2016-08-01 00:00:00
Creation Date	1999-05-22 11:19:13
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2015-11-09 14:05:47
Document Title	aos_AppNotices.fm
Document Creator	FrameMaker 12.0.4
Document Author:	Shelly.Schneider

Wireless Access Point
Appendix D: Notices (XR-1000 to XR-6000 Indoor Models)

This Appendix contains Notices, Warnings, and Compliance information for
these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000.
This includes the models just listed whether or not they have been upgraded
to have IEEE 802.11ac Wave2 wireless capability by replacing existing
radios with XI-AC3470 modules.
For the XR-500/600/XD Series, please see “Notices (XD and XR500/600
Series Only)” on page 541.
For models including the letter H (such as the XR-520H and XH2120), please see the Quick Installation Guide for that model.
This appendix contains the following information:

“Notices” on page 559

“EU Directive 1999/5/EC Compliance Information” on page 564

“Compliance Information (Non-EU)” on page 571

“Safety Warnings” on page 573

“Translated Safety Warnings” on page 574

“Software License and Product Warranty Agreement” on page 576

“Hardware Warranty Agreement” on page 576
Notices
Wi-Fi Alliance Certification
www.wi-fi.org
FCC Notice
This device complies with Part 15 of the FCC Rules, with operation subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause unwanted operation.
559
Wireless Access Point
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate RF energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following safety measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Consult the dealer or an experienced wireless technician for help.
Use of a shielded twisted pair (STP) cable must be used for all Ethernet
connections in order to comply with EMC requirements.
High Power Radars
High power radars are allocated as primary users (meaning they have priority) in
the 5250MHz to 5350MHz and 5650MHz to 5850MHz bands. These radars could
cause interference and/or damage to LE-LAN devices.
Non-Modification Statement
Unauthorized changes or modifications to the device are not permitted. Use only
the supplied internal antenna, or external antennas supplied by the manufacturer.
Modifications to the device will void the warranty, void the user’s authority to
operate the equipment, and may violate FCC regulations (Reference: FCC Part 15,
section 15.21). Please see the Xirrus Web site for a list of all approved antennas.
Cable Runs for Power over Gigabit Ethernet (PoGE)
If using PoGE, the Array must be connected to PoGE networks without routing
cabling to the outside plant — this ensures that cabling is not exposed to lightning
strikes or possible cross over from high voltage.
560
Wireless Access Point
UL Statement
Use only with listed ITE product.
Battery Warning
Caution! The AP contains a battery which is not to be replaced by the
customer. Danger of Explosion exists if the battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
RF Radiation Hazard Warning (FCC and Industry Canada)
For APs with IEEE 802.11ac Wave2 radios, install the unit being careful to keep
the separation distances indicated in the table below between radiating elements
of access point and users. This is consistent with the security warning exposure
limits specified by the RSS-102 to relative radio frequencies.
Pour les appareils IEEE 802.11ac Wave2, installez l'appareil en veillant à conserver les
distances de séparation indiquées dans la table ci-dessus entre les éléments rayonnants et
les personnes. Cet avertissement de sécurité est conforme aux limites d'exposition définies
par la norme CNR-102 relative aux fréquences radio.
802.11ac Wave2
Modules (Radios) in AP
FCC Separation
Distance (cm)
IC Separation
Distance (cm)
1 module
20.0
21.2
XR6000 - 12 modules
51.3
51.6
XR4000 - 8 modules
44.0
50.8
XR2000 - 4 modules
31.1
39.9
For other APs, to ensure compliance with FCC and Industry Canada (IC) RF
exposure requirements, this device must be installed in a location where the
antennas of the device will have a minimum distance of at least 30 cm (12 inches)
from all persons.
561
Wireless Access Point
Pour les autres appareils, installez l'appareil en veillant à conserver une distance d'au
moins 30 cm entre les éléments rayonnants et les personnes. Cet avertissement de sécurité
est conforme aux limites d'exposition définies par la norme CNR-102 at relative aux
fréquences radio.
Industry Canada Notice and Marking
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
The term “IC:” before the radio certification number only signifies that Industry
Canada technical specifications were met.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
562
Wireless Access Point
This equipment should be installed and operated with a minimum distance of
30cm between the radiator and your body.
Cet équipement doit être installé et utilisé à une distance minimale de 30cm entre le
radiateur et votre corps.
High Power Radars
High power radars are allocated as primary users (meaning they have priority) in
the 5250MHz to 5350MHz and 5650MHz to 5850MHz bands. These radars could
cause interference and/or damage to LELAN devices used in Canada.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-àd., qu’ils ont la priorité) pour les bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz. Ces
radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
563
Wireless Access Point
EU Directive 1999/5/EC Compliance Information

This Appendix contains Notices, Warnings, and Compliance information for
these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000.
This includes the models just listed whether or not they have been upgraded
to have IEEE 802.11ac Wave2 wireless capability by replacing existing
radios with XI-AC3470 modules.
For Notices, Warnings, and Compliance information for other models, see
the notes at the beginning of this chapter.
This section contains compliance information for the Xirrus Wireless Array family
of products. The compliance information contained in this section is relevant to
the European Union and other countries that have implemented the EU Directive
1999/5/EC.
Declaration of Conformity
Cesky [Czech] Toto zahzeni je v souladu se základnimi požadavky a
ostatnimi odpovidajcimi ustano veni mi Směrnice
1999/5/EC.
Dansk [Danish] Dette udstyr er i overensstemmelse med de
væsentlige krav og andre relevante bestemmelser i
Direktiv 1999/5/EF.
Deutsch [German] Dieses Gerat entspricht den grundlegenden
Anforderungen und den weiteren entsprechenden
Vorgaben der Richtinie 1999/5/EU.
Eesti [Estonian] See seande vastab direktiivi 1999/5/EU olulistele
nöuetele ja teistele as jakohastele sätetele.
English This equipment is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Español [Spain] Este equipo cump le con los requisitos esenciales asi
como con otras disposiciones de la Directiva 1999/5/
CE.
564
Wireless Access Point
Ελληνυκη [Greek] Αυτόζ ο εξοπλτσμόζ είναι σε συμμόρφωση με τιζ
ουσιώδειζ απαιτήσειζ και ύλλεζ σχετικέζ διατάξειζ τηζ
Οδηγιαζ 1999/5/EC.
Français [French] Cet appareil est conforme aux exigences essentielles
et aux autres dispositions pertinentes de la Directive
1999/5/EC.
ĺslenska [Icelandic] Þetta tæki er samkvæmt grunnkröfum og öðrum
viðeigandi ákvæðum Tilskipunar 1999/5/EC.
Italiano [Italian] Questo apparato é conforme ai requisiti essenziali ed
agli altri principi sanciti dalla Direttiva 1999/5/CE.
Latviski [Latvian] Šī iekārta atbilst Direktīvas 1999/5/EK būtiskajā
prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių [Lithuanian] Šis įrenginys tenkina 1995/5/EB Direktyvos
esminius reikalavimus ir kitas šios direktyvos
nuostatas.
Nederlands [Dutch] Dit apparant voldoet aan de essentiele eisen en
andere van toepassing zijnde bepalingen van de
Richtlijn 1995/5/EC.
Malti [Maltese] Dan l-apparant huwa konformi mal-htigiet essenzjali
u l-provedimenti l-ohra rilevanti tad-Direttiva 1999/
5/EC.
Margyar [Hungarian] Ez a készülék teljesiti az alapvetö követelményeket
és más 1999/5/EK irányelvben meghatározott
vonatkozó rendelkezéseket.
Norsk [Norwegian] Dette utstyret er i samsvar med de grunnleggende
krav og andre relevante bestemmelser i EU-direktiv
1999/5/EF.
Polski [Polish] Urządzenie jest zgodne z ogólnymi wymaganiami
oraz sczególnymi mi warunkami określony mi
Dyrektywą. UE:1999/5/EC.
565
Wireless Access Point
Portuguès [Portuguese] Este equipamento está em conformidade com os
requisitos essenciais e outras provisões relevantes da
Directiva 1999/5/EC.
Slovensko [Slovenian] Ta naprava je skladna z bistvenimi zahtevami in
ostalimi relevantnimi popoji Direktive 1999/5/EC.
Slovensky [Slovak] Toto zariadenie je v zhode so základnými
požadavkami a inými prislušnými nariadeniami
direktiv: 1999/5/EC.
Suomi [Finnish] Tämä laite täyttää direktiivin 1999/5//EY olennaiset
vaatimukset ja on siinä asetettujen muiden laitetta
koskevien määräysten mukainen.
Svenska [Swedish] Denna utrustning är i överensstämmelse med de
väsentliga kraven och andra relevanta bestämmelser
i Direktiv 1999/5/EC.
Assessment Criteria
The following standards were applied during the assessment of the product
against the requirements of the Directive 1999/5/EC:

Radio: EN 301 893 and EN 300 328 (if applicable)

EMC: EN 301 489-1 and EN 301 489-17

Safety: EN 50371 to EN 50385, EN 60601, and EN60950
CE Marking
For the Xirrus Wireless Array, the CE mark and Class-2 identifier opposite are
affixed to the equipment and its packaging:
566
Wireless Access Point
WEEE Compliance

Natural resources were used in the production of
this equipment.

This equipment may contain hazardous
substances that could impact the health of the
environment.

In order to avoid harm to the environment and
consumption of natural resources, we encourage
you to use appropriate take-back systems when
disposing of this equipment.

The appropriate take-back systems will reuse or
recycle most of the materials of this equipment in
a way that will not harm the environment.

The crossed-out wheeled bin symbol (in
accordance with European Standard EN 50419)
invites you to use those take-back systems and
advises you not to combine the material with
refuse destined for a land fill.

If you need more information on collection, reuse and recycling systems, please contact your
local or regional waste administration.

Please contact Xirrus for specific information on
the environmental performance of our products.
567
Wireless Access Point
National Restrictions
In the majority of the EU and other European countries, the 2.4 GHz and 5 GHz
bands have been made available for the use of Wireless LANs. The following table
provides an overview of the regulatory requirements in general that are
applicable for the 2.4 GHz and 5 GHz bands.
Frequency
Band (MHz)
Max Power Level
(EIRP) (mW)
Indoor
Outdoor
2400–2483.5
100
X **
5250–5350 *
200
N/A
5470–5725*
1000
*Dynamic frequency selection and Transmit Power Control is required in these
frequency bands.
**France is indoor use only in the upper end of the band.
The requirements for any country may change at any time. Xirrus recommends
that you check with local authorities for the current status of their national
regulations for both 2.4 GHz and 5 GHz wireless LANs.
The following countries have additional requirements or restrictions than those
listed in the above table:
Belgium
The Belgian Institute for Postal Services and Telecommunications (BIPT) must
be notified of any outdoor wireless link having a range exceeding 300 meters.
Xirrus recommends checking at www.bipt.be for more details.
Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300
meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en
telecommunicatie (BIPT). Zie www.bipt.be voor meer gegevens.
568
Wireless Access Point
Les liasons sans fil pour une utilisation en extérieur d’une distance supérieure à 300
mèters doivent être notifiées à l’Institut Belge des services Postaux et des
Télécommunications (IBPT). Visitez www.bipt.be pour de plus amples détails.
Greece
A license from EETT is required for the outdoor operation in the 5470 MHz to
5725 MHz band. Xirrus recommends checking www.eett.gr for more details.
Η δη ιουργβάικτ ωνεξωτερικο ρουστη ζ νησυ νοτ των 5470–5725 ΜΗz ε ιτρ ετάιωνο
ετάά όάδειά της ΕΕΤΤ, ου ορηγεβτάι στερά ά ό σ φωνη γν η του ΓΕΕΘΑ. ερισσότερες
λε τομ ρειεωστο www.eett.gr
Italy
This product meets the National Radio Interface and the requirements
specified in the National Frequency Allocation Table for Italy. Unless this
wireless LAN product is operating within the boundaries of the owner’s
property, its use requires a “general authorization.” Please check with
www.communicazioni.it/it/ for more details.
Questo prodotto é conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il
Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato
all’interno del proprio fondo, l’utilizzo di prodotti wireless LAN richiede una
“autorizzazione Generale.” Consultare www.communicazioni.it/it/ per maggiori
dettagli.
Norway, Switzerland and Liechtenstein
Although Norway, Switzerland and Liechtenstein are not EU member states,
the EU Directive 1999/5/EC has also been implemented in those countries.
Calculating the Maximum Output Power
The regulatory limits for maximum output power are specified in EIRP (radiated
power). The EIRP level of a device can be calculated by adding the gain of the
antenna used (specified in dBi) to the output power available at the connector
(specified in dBm).
569
Wireless Access Point
Antennas
The Xirrus Wireless Array employs integrated antennas that cannot be removed
and which are not user accessible. Nevertheless, as regulatory limits are not the
same throughout the EU, users may need to adjust the conducted power setting
for the radio to meet the EIRP limits applicable in their country or region.
Adjustments can be made from the product’s management interface — either Web
Management Interface (WMI) or Command Line Interface (CLI).
Operating Frequency
The operating frequency in a wireless LAN is determined by the access point. As
such, it is important that the access point is correctly configured to meet the local
regulations. See National Restrictions in this section for more information.
Russia CU Approval (XR-2000/4000 Series)
For the Xirrus XR-2000 and XR-4000 Series Wireless Arrays, the approval mark is
affixed to the equipment:
If you still have questions regarding the compliance of Xirrus products or you
cannot find the information you are looking for, please contact us at:
Xirrus, Inc.
2101 Corporate Center Drive
Thousand Oaks, CA 91320
USA
Tel:
Fax:
1.805.262.1600
1.800.947.7871 Toll Free in the US
1.866.462.3980
www.xirrus.com
570
Wireless Access Point
Compliance Information (Non-EU)

This Appendix contains Notices, Warnings, and Compliance information for
these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000.
This includes the models just listed whether or not they have been upgraded
to have IEEE 802.11ac Wave2 wireless capability by replacing existing
radios with XI-AC3470 modules.
For Notices, Warnings, and Compliance information for other models, see
the notes at the beginning of this chapter.
This section contains compliance information for the Xirrus Wireless Array family
of products. The compliance information contained in this section is relevant to
the listed countries (outside of the European Union and other countries that have
implemented the EU Directive 1999/5/EC).
Declaration of Conformity—Mexico, Thailand
Mexico XR-1000, XR-2000, XR-4000, XR-6000/7000
Dictamen #: 1402D00741 
Models with 2x2 radios: 
Cofetel Cert #: RCPXIXI13-0807
Models with 3x3 radios: 
Cofetel Cert #: RCPXIXI13-0808
Thailand This telecommunication equipment conforms to
NTC technical requirement.
571
Wireless Access Point
Declaration of Conformity—Brazil
XR-1000
XR-4000
572
XR-2000
Wireless Access Point
Safety Warnings

This Appendix contains Notices, Warnings, and Compliance information for
these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000.
This includes the models just listed whether or not they have been upgraded
to have IEEE 802.11ac Wave2 wireless capability by replacing existing
radios with XI-AC3470 modules.
For Notices, Warnings, and Compliance information for other models, see
the notes at the beginning of this chapter.
Safety Warnings
Explosive Device Proximity Warning
Lightning Activity Warning
Circuit Breaker Warning
Read all user documentation before powering this device. All Xirrus
interconnected equipment should be contained indoors. This product is
not suitable for outdoor operation. Please verify the integrity of the
system ground prior to installing Xirrus equipment. Additionally,
verify that the ambient operating temperature does not exceed 50°C.
Do not operate the XR Series Wireless Array near unshielded blasting
caps or in an explosive environment unless the device has been
modified to be especially qualified for such use.
Do not work on the XR Series Wireless Array or connect or disconnect
cables during periods of lightning activity.
The XR Series Wireless Array relies on the building’s installation for
over current protection. Ensure that a fuse or circuit breaker no larger
than 120 VAC, 15A (U.S.) or 240 VAC, 10A (International) is used on all
current-carrying conductors.
Translated safety warnings appear on the following page.
573
Wireless Access Point
Translated Safety Warnings

This Appendix contains Notices, Warnings, and Compliance information for
these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000.
This includes the models just listed whether or not they have been upgraded
to have IEEE 802.11ac Wave2 wireless capability by replacing existing
radios with XI-AC3470 modules.
For Notices, Warnings, and Compliance information for other models, see
the notes at the beginning of this chapter.
Avertissements de Sécurité
574
Sécurité
Proximité d'appareils explosifs
Foudre
Lisez l'ensemble de la documentation utilisateur avant de mettre cet
appareil sous tension. Tous les équipements Xirrus interconnectés
doivent être installés en intérieur. Ce produit n'est pas conçu pour être
utilisé en extérieur. Veuillez vérifier l'intégrité de la terre du système
avant d'installer des équipements Xirrus. Vérifiez également que la
température de fonctionnement ambiante n'excède pas 50°C (40°C pour
XR-520).
N'utilisez pas l'unité XR Wireless Array à proximité d'amorces non
blindées ou dans un environnement explosif, à moins que l'appareil
n'ait été spécifiquement modifié pour un tel usage.
N'utilisez pas l'unité XR Wireless Array et ne branchez pas ou ne
débranchez pas de câbles en cas de foudre.
Wireless Access Point
Disjoncteur
L'unité XR Wireless Array dépend de l'installation du bâtiment pour ce
qui est de la protection contre les surintensités. Assurez-vous qu'un
fusible ou qu'un disjoncteur de 120 Vca, 15 A (États-Unis) ou de 240
Vca, 10 A (International) maximum est utilisé sur tous les conducteurs
de courant.
575
Wireless Access Point
Software License and Product Warranty Agreement
For Software License and Product Warranty information, please see http://
www.xirrus.com/support/eula/.
Hardware Warranty Agreement
For the Hardware Warranty Agreement, please see http://www.xirrus.com/
support/eula/.
576

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Shelly.Schneider
Create Date                     : 1999:05:22 11:19:13Z
Modify Date                     : 2015:11:09 14:05:47-08:00
Has XFA                         : No
Language                        : en
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : FrameMaker 12.0.4
Metadata Date                   : 2015:11:09 14:05:47-08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : aos_AppNotices.fm
Creator                         : Shelly.Schneider
Document ID                     : uuid:0b291fd3-e221-4422-80f0-35df5ad78ae7
Instance ID                     : uuid:bede1e07-1292-4964-b954-653451f9e796
Page Mode                       : UseOutlines
Page Count                      : 18
Signing Date                    : 2015:11:09 14:05:47-08:00
Signing Authority               : ARE Acrobat Product v8.0 P23 0002337
Annotation Usage Rights         : Create, Delete, Modify, Copy, Import, Export

EXIF Metadata provided by EXIF.tools