Cambridge Executive BC11X BC118/BC119 User Manual
Cambridge Executive Limited BC118/BC119
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2426255 |
| Application ID | g02FcwRYC2/STh9y/Jlfsg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 157.95kB (1974379 bits) |
| Date Submitted | 2014-10-24 00:00:00 |
| Date Available | 2014-10-29 00:00:00 |
| Creation Date | 2014-07-28 08:49:47 |
| Producing Software | doPDF Ver 7.3 Build 391 (Windows 7 Home Premium Edition (SP 1) - Version: 6.1.7601 (x64)) |
| Document Lastmod | 2014-07-28 08:50:44 |
| Document Title | User Manual |
BC118 Datasheet Key Specifications Bluetooth Certified 4.0 Audio module Single Mode: Bluetooth Low Energy (BLE) Embedded Bluetooth Protocol Stack Supports GATT Profile, Audio, Proximity, and iBeacon Supports I2C and UART transparent Data Modes Simple UART and GPIO interface for command and control Small form factor (14.4mm x 19.3mm x 2.2mm) Bluetooth, FCC and CE certified Description Applications Industrial Automation Lighting Automotive Medical Devices Wearable Devices Sensors, Actuators BC118 is a highly flexible, ultra low power, small form factor Bluetooth Version 4.0 Certified module. It comes preloaded with BlueCreation Melody Smart software, and is ideal for developers who want to quickly and cost effectively integrate Bluetooth Low Energy functionality into their products or develop standalone sensors or accessories. BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com BC118 Datasheet General Specifications Specifications Description Bluetooth Standard Bluetooth 4.0 Interfaces UART, AIO, GPIO, USB, I2C Size 19.3mm x 14.4mm x 2.8mm Weight 0.9g RF Specifications Specifications Description Frequency Band 2,402 MHz to 2,480 MHz Modulation 8 DPSK, PI/4 DQPSK, GFSK Maximum Data Rate 270kbps (typical 60kbps) Operating Range 30m RF Sensitivity 0.1% BER at -92.5dBm Transmit Power 7.5dBm BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com BC118 Datasheet Electric Specifications Specifications Description Supply Voltage 1.8V to 4.3V DC (Supports Li Ion battery voltage range) Typical Current Tx 16mA (Only on Tx/Rx) Typical Deep Sleep <5µA (Connected) Typical Hibernate <1.9µA (Connected) Typical Dormant >900nA Operating Temperature -40°C to 85°C BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com BC118 Datasheet Module Drawing BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com BC118 Datasheet Module Footprint BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com BC118 Datasheet Placement Considerations BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com BC118 Datasheet PIN Description No1 is top left on the module and then it goes anti clockwise No 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Pin Name GND GND AIO_2 AIO_1 AIO_0 UART_TX UART_RX PIO_3 PIO_4 PIO_5/SPI_CLK PIO_6/SPI_CSB GND GND PIO_7/SPI_MOSI GND GND VDD_PADS GND PIO_8/SPI_MISO SPI_PCM# PIO_2 I2C_SCL GND GND I2C_SDA PIO_9 VBAT PIO_10 PIO_11 WAKE GND GND GND GND GND Pin Type GND GND Bi-Directional Bi-Directional Bi-directional Bi-directional Bi-directional Bi-directional Bi-directional Bi-directional Bi-directional GND GND Bi-directional GND GND Supply GND Bi-directional Input Bi-directional Bi-directional GND GND Bi-directional Bi-directional Battery terminal +ve Bi-directional Bi-directional Wake Pin GND GND GND GND GND Pin Description Common Ground Common Ground Analog programmable input/output line Analog programmable input/output line Analog programmable input/output line UART TX Data UART RX Data Programmable input/output line Programmable input/output line Programmable input/output line Programmable input/output line Common Ground Common Ground Programmable input/output line Common Ground Common Ground Positive Supply input Common Ground Programmable input/output line Select PCM/SPI Programmable input/output line Programmable input/output line Common Ground Common Ground Programmable input/output line Programmable input/output line Battery Positive Programmable input/output line Programmable input/output line Wake Pin Common Ground Common Ground Common Ground Common Ground Common Ground BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com BC118 Datasheet Notes PIO_X are bidirectional with weak pull down Reset Input is with strong pull-up USB data positive with selectable internal 1.5kΩ pull up resistor UART are Bidirectional with weak pull up PCM_OUT, IN, SYNC and CLK can be used as SPI_MISO, MOSI, CSB and CLK respectively. SPI-PCM# high switches SPI/PCM lines to SPI, low switches to PCM/PIO use Solder Reflow Profile Preheat Temperature: 150°C for 100 seconds Temperature: 240°C for 40 seconds. Single Pass BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com BC118 Datasheet Regulatory Certifications BC118 is delivered with FCC, CE, IC and Bluetooth SIG certifications. This allows to integrate the module in an end product without the need to obtain subsequent and separate approvals from these regulatory agencies. This is valid in the case no other intentional or un-intentional radiator components are incorporated into the product. Without these certification, an end product cannot be marketed in the relevant regions. United States - FCC In case no other intentional or un-intentional radiator is incorporated, the BC118's FCC certification allows users to integrate the module into products without the need to obtain subsequent and separate approval. The BC118 was approved as "intentional transmitter radio module" by the United States' Federal Communications Commission (FCC) with accordance to CFR47 Telecommunications Part 15, Subpart C, section 212. This certification is applicable in all the states in the United States. The certification allows products to be listed in the NRTL (National Recognized Test Laboratory) as appointed by OSHA (Occupational Safety and Health Administration). Labelling The BC118 has been labelled with its own FCC ID number. In order to the extend the certification granted to the BC118, its FCC ID number must be displayed on the finished product in which the module is integrated. The following wording should be used "Contains Transmitter Module FCC ID: SSS - BC11X " or “Contains FCC ID: SSS-BC11X”. The user-manual for any product in which the BC118 is integrated in must include the following statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com BC118 Datasheet To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For further information regarding the FCC certification requirements please review the following websites: Federal Communications Commission (FCC): http://www.fcc.gov FCC Office of Engineering and Technology (OET) Laboratory Division Knowledge Database (KDB): http://apps.fcc.gov/oetcf/kdb/index.cfm BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com 10 BC118 Datasheet Europe - CE and RoHS Marking In case no other intentional or un-intentional radiator is incorporated, the BC118's CE marking certification allows users to integrate the module into products without the need to obtain subsequent and separate CE approval. The BC118 has been tested and granted approval as R&TTE Directive product under the 1999/5/EC Essential Requirements for Health and Safety (Article (3.1(a)), Electromagnetic Compatibility, (EMC) (Article 3.1(b)), and Radio (Article 3.2). A Notified Body Opinion has been issued. The BC118 has also been tested and granted approval under the directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment 2002/95/EC (commonly referred to as the Restriction of Hazardous Substances Directive or RoHS). This certification ensures the module is environmental safe and free from hazardous substances (including Lead). Both certifications are applicable in all the 27 countries of the European Economic Area. Labelling and Documentation Products complying with all relevant essential requirements shall bear the CE conformity marking accompanied by the identification number XXX-XXX The RoHS certification does not dictate any specific product labelling. However, we recommend marking the product with a "RoHS Compliant" statement. R&TTE Directive requires a manufacturer to establish technical documentation. It must be kept by the manufacturer or his authorised representative in the EU for at least 10 years after the last product has been manufactured. The documentation must cover: a general description of the product, conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits and other design documentation, descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product, a list of the standards referred to in Article 5, applied in full or in part, and descriptions and explanations of the solutions adopted to meet the essential requirements of the Directive where such standards results of design calculations made, examinations carried out, etc., test reports. BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com 11 BC118 Datasheet Test reports must include the following table containing the BC118 tests: Certification Standards Safety EN 609501:2006+A11:2009+A1:2010+A12:2011+A2:2013 Health EN 62479:2010 EMC EN 301 489-1 V1.9.2:2011 Article Laboratory Report Number Date (3.1(a)) (3.1(b)) EN 301 489-17 V2.2.1:2012 Radio EN 300 328 V1.8.1:2012 (3.2) For further labelling and CE marking requirements please review the R&TTE Compliance Association Technical Guidance: http://rtteca.com/ For further information regarding the R&TTE certification requirements please review the following websites: Radio and Telecommunications Terminal Equipment (R&TTE): http://ec.europa.eu/enterprise/rtte/index_en.htm European Conference of Postal and Telecommunications Administrations (CEPT): http://www.cept.org European Telecommunications Standards Institute (ETSI): http://www.etsi.org European Radio Communications Office (ERO): http://www.ero.dk BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com 12 BC118 Datasheet Canada - IC In case no other intentional or un-intentional radiator is incorporated, the BC118's IC certification allows users to integrate the module into products without the need to obtain subsequent and separate approval. The BC118 has been tested and granted approval under Industry Canada (IC) Radio Standards Specification (RSS) RSS-210, RSSGen and ICES-003. This certification is applicable in Canada. Labelling and Documentation The BC118 has been labelled with its own IC ID number. In order to the extend the certification granted to the BC118, its CE ID number must be displayed on the finished product in which the module is integrated. The following wording should be used "Contains Transmitter Module IC: XXX" The user-manual for any product in which the BC118 is integrated in must include the following statements: This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante For further labelling and IC marking requirements please review the Industry Canada website: http://www.ic.gc.ca/ BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com 13 BC118 Datasheet Bluetooth Qualification Program (BQP) In case no other non-certified Bluetooth components are incorporated, the BC118's BQP marking certification allows users to integrate the module into products without the need to obtain subsequent and separate approval. The BC118 has been approved by the Bluetooth Qualification Body (BQB) to use the Bluetooth trademark and to offer official Bluetooth functionality. The approval according to the V4.0B Bluetooth specification confirms that the module complies with the Bluetooth specification and will successfully operate with other products supporting the same profile. BQP certification also ensures that the module has gone through safety assessment. This certification was granted through a combination of product performance testing and interoperability testing. This certification applies globally. Labelling Products complying with all relevant requirements are allowed to bear the official Bluetooth logo For further information regarding the BQP certification requirements please review the following websites: Bluetooth Special Interest Group: https://www.bluetooth.org/apps/content/ Notes: Changes or modifications that are made to the module circuitry can hinder the certification Installers must comply with all of the instructions provided by the certification agency, which indicate installation and/or operating conditions necessary for compliance It is important to note that the finished product is required to comply with all applicable authorizations regulations and requirement that is not associated with the BC118 module, including non-intentional transmitting modules and other intentionally transmitting modules. The previous section represents BlueCreation interpretation of the salient issues of the certifications. For full details of the certification please refer to the local agencies' websites. Where there is any difference between this document and the local agencies' website, the subsequent should be followed. At the time of writing this document FCC, CE and BQP certification were still processed by the relevant authorities. BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com 14 BC118 Datasheet Ordering Information Part number BC118 Order number Description BC118 Standalone Bluetooth 4.0 Module with integrated Antenna BC118-B Standalone Bluetooth 4.0 Module with integrated Antenna and iBeacon BC119 Host Controlled Bluetooth 4.0 Module with integrated Antenna BC119-B Host Controlled Bluetooth 4.0 Module with integrated Antenna and iBeacon BC118-DISKIT001 Evaluation Kit for BC118 General Notes BlueCreation's products are not authorised for use in life-support or safety-critical applications. Use in such applications is done at the sole discretion of the customer. BlueCreation will not warrant the use of its devices in such applications. While every care has been taken to ensure the accuracy of the contents of this document, BlueCreation cannot accept responsibility for any errors. BlueCreation reserves the right to make modifications, corrections and any other changes to its products at any time. Customers should obtain the latest information before placing orders. BlueCreation, other products, services and names used in this document may have been trademarked by their respective owners. The publication of this information does not imply that any license is granted under any patent or other rights owned by BlueCreation. Refer to www.bluecreation.com for more information. BlueCreation® is a trading name for Cambridge Executive Limited. BlueCreation. St John’s Innovation Centre, Cowley Road Cambridge CB4 0WS United Kingdom t. +44 (0)1223 420 252 e. info@bluecreation.com www.bluecreation.com 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2014:07:28 08:49:47Z Modify Date : 2014:07:28 08:50:44+01:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:07:28 08:50:44+01:00 Producer : doPDF Ver 7.3 Build 391 (Windows 7 Home Premium Edition (SP 1) - Version: 6.1.7601 (x64)) Document ID : uuid:37079317-5c05-48e5-804d-09964a8de716 Instance ID : uuid:17ce610f-2af7-4b62-ae93-99fee6519e1f Format : application/pdf Page Layout : OneColumn Page Mode : UseNone Page Count : 15EXIF Metadata provided by EXIF.tools