Cambridge Executive BC127-X Bluetooth module 4.0 dual mode User Manual Manual

Cambridge Executive Limited Bluetooth module 4.0 dual mode Manual

Manual

BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 1 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Key Specifications  Bluetooth Certified 4.0 Audio module  Dual Mode: Bluetooth and Bluetooth Low Energy (BLE)  Backwards compatible with 1.1, 2.0, 2.1 + EDR and 3.0  Embedded Bluetooth Protocol Stack  Supports HFP, A2DP, AVRCP, PBAP and SPP  Supports IAP1/IAP2 profiles for connection to iOS devices  Simple UART and GPIO interface for command and control  Can connect to external Codecs with I2S, PCM, SPDIF interface  Small form factor (11.8mm x 18mm x 3.2mm)  Bluetooth, FCC and CE certified Applications  Wireless Speakers, Docks and Headsets  SmartPhone Controlled Audio Systems  Automotive Infotainment Systems  Medical Devices  High Quality Audio Streaming  Gaming Accessories and MP3 Players  BC127 is a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Audio module. It comes preloaded with BlueCreation Melody software, and is ideal for developers who want to quickly and cost effectively integrate Bluetooth functionality into their products. Description
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 2 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet General Specifications Bluetooth 4.0 Baseband 16 MbitFlash Audio DSP 16 Bit Stereo RAM 16 Bit RISC MCU 2.4Ghz Radio I/Os Speaker Left 4 AIOs 5PIOS UART USB PCM/I2S/SPDIF Filter XTAL BC127 Chip Antenna Speaker Right Mic Left Mic Right MIMIC
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 3 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Specifications Description Bluetooth Standard Bluetooth 4.0 Class 2 Interfaces UART, AIO, GPIO, USB, SPI, Audio In, Mic In, PCM, I2S, SPDIF, I2C Size 11.8mm x 18mm x 3.2mm Weight 1.1g RF Specifications Specifications Description Frequency Band 2,402 MHz to 2,480 MHz Modulation 8 DPSK, PI/4 DQPSK, GFSK Maximum Data Rate 3Mbps (typical 1.6Mbps) Operating Range 20m RF Sensitivity 0.1% BER at -88dBm Transmit Power BER/EDR Class2＜4dBm, BLE＜10dBm Audio Specifications
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 4 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Specifications Description DAC resolution 16 bits DAC Output Sample Rate 8 KHz to 90 KHz DAC SNR 96dB Stereo Separation -87.7dB Electric Specifications Specifications Description Supply Voltage 1.8V to 3.7 V DC Typical Current 20mA (Music streaming) Typical Current Idle <5mA (Connectable) Operating Temperature -20°C to 70°C Module Footprint
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 5 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 6 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Placement Considerations
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 7 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Audio Circuit The Audio circuit consists of:  2 independent 16-bit high-quality ADC channels: o Programmable as either microphone or line input o Programmable as either stereo or dual-mono input o Multiplexed with 2 of the digital microphone inputs o Each channel is independently configurable to be either single-ended or fully differential o Each channel has an analog and digital programmable gain stage  A dual differential class A-B output stage. If a single ended audio output is required, use an external differential to single-ended converter. The main features of the interface are:  Stereo and mono analog Input for voice band and audio band  Stereo and mono analog output for voice band and audio band  Support for stereo digital audio bus standards such as I2S  Support for IEC-60958 standard stereo digital audio bus standards, e.g. SPDIF and AES3  Support for PCM including PCM master codecs that require an external system clock The analog Audio diagram is below:
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 8 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet ADC MIC_RP MIC_RN ADMIC_LP MIC_LN DAC SPKR_LN LPF SPKR_LP DAC SPKR_RN LPF SPKR_RP Digital Circuit 16 16 16 16
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 9 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet PIN Description No Pin Name Pin Type Pin Description 1 GND GND Common Ground 2 GND GND Common Ground 3 GND GND Common Ground 4 GND GND Common Ground 5 PIO_6 Bi-directional Programmable input/output line 6 PIO_7 Bi-directional Programmable input/output line 7 CAP_SENSE_1 Analog Input Capacitive Touch Sense Input 8 CAP_SENSE_4 Analog Input Capacitive Touch Sense Input 9 CAP_SENSE_3 Analog Input Capacitive Touch Sense Input 10 CAP_SENSE_2 Analog Input Capacitive Touch Sense Input 11 GND GND Common Ground 12 AIO_1 Bi-directional Analog programmable input/output line 13 SPKR_LN Audio output Speaker output negative, left 14 SPKR_LP Audio output Speaker output positive, left 15 SPKR_RN Audio output Speaker output negative, right 16 SPKR_RP Audio output Speaker output positive, right 17 MIC_BIAS_A Analog input Microphone bias 18 MIC_RN Analog input Microphone input negative, right 19 MIC_RP Analog input Microphone input positive, right 20 MIC_LN Analog input Microphone input negative, left 21 MIC_LP Analog input Microphone input positive, left 22 GND GND Common Ground 23 PIO_0 Bi-directional Programmable input/output line 24 PIO_1 Bi-directional Programmable input/output line 25 PIO5 Bi-directional Programmable input/output line 26 PIO_4 Bi-directional Programmable input/output line 27 GND GND Common Ground 28 VREGEN Analogue Take High to Enable Switch-Mode Regulator 29 CHG_EXT Charger input External battery charger control 30 VCHG Charger input Battery Charger Input 31 VBAT_SENSE Battery sense Battery Charger Sense 32 VBAT Battery terminal +ve Battery Positive 33 VDD_PADS Supply Positive Supply input 34 3V3_USB Supply Positive Supply input 35 USB_N Bi-directional USB data negative 36 USB_P Bi-directional USB data positive 37 LED_0 Open drain output LED Driver 38 LED_1 Open drain output LED Driver
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 10 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet 39 LED_2 Open drain output LED Driver No Pin Name Pin Type Pin Description 40 UART_CTS Bi-directional UART Clear to Send 41 UART_TX Bi-directional UART TX Data 42 UART_RX Bi-directional UART RX Data 43 UART_RTS Bi-directional UART request to send ,active low 44 RST# Reset Input Reset if low for more than 5ms 45 SPI_PCM# Input Select PCM/SPI 46 PCM_SYNC Bi-directional Synchronous data sync 47 PCM_CLK Bi-directional Synchronous data clock 48 PCM_OUT CMOS output Synchronous data output 49 PCM_IN CMOS input Synchronous data input 50 PIO_2 Bi-directional Programmable input/output line 51 PIO_3 Bi-directional Programmable input/output line Notes  PIO_X are bidirectional with weak pull down  Reset Input is with strong pull-up  USB data positive with selectable internal 1.5kΩ pull up resistor  UART are Bidirectional with weak pull up  PCM_OUT, IN, SYNC and CLK can be used as SPI_MISO, MOSI, CSB and CLK respectively. SPI-PCM# high switches SPI/PCM lines to SPI, low switches to PCM/PIO use Solder Reflow Profile  Preheat Temperature: 150°C for 100 seconds  Temperature: 220°C for 40 seconds.  Single Pass
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 11 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Regulatory Certifications BC127 is delivered with FCC, CE, IC and Bluetooth SIG certifications. This allows to integrate the module in an end product without the need to obtain subsequent and separate approvals from these regulatory agencies. This is valid in the case no other intentional or un-intentional radiator components are incorporated into the product. Without these certification, an end product cannot be marketed in the relevant regions. United States - FCC  In case no other intentional or un-intentional radiator is incorporated, the BC127's FCC certification allows users to integrate the module into products without the need to obtain subsequent and separate approval.  The BC127 was approved as "intentional transmitter radio module" by the United States' Federal Communications Commission (FCC) with accordance to CFR47 Telecommunications Part 15, Subpart C, section 212. This certification is applicable in all the states in the United States.  The certification allows products to be listed in the NRTL (National Recognized Test Laboratory) as appointed by OSHA (Occupational Safety and Health Administration). Labelling  The BC127 has been labelled with its own FCC ID number. In order to the extend the certification granted to the BC127, its FCC ID number must be displayed on the finished product in which the module is integrated. The following wording should be used "Contains Transmitter Module FCC ID: SSSBC127-X" or “Contains FCC ID: SSSBC127-X”.  The user-manual for any product in which the BC127 is integrated in must include the following statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 12 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For further information regarding the FCC certification requirements please review the following websites: Federal Communications Commission (FCC): http://www.fcc.gov FCC Office of Engineering and Technology (OET) Laboratory Division Knowledge Database (KDB): http://apps.fcc.gov/oetcf/kdb/index.cfm
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 13 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Europe - CE and RoHS Marking  In case no other intentional or un-intentional radiator is incorporated, the BC127's CE marking certification allows users to integrate the module into products without the need to obtain subsequent and separate CE approval.  The BC127 has been tested and granted approval as R&TTE Directive product under the 1999/5/EC Essential Requirements for Health and Safety (Article (3.1(a)), Electromagnetic Compatibility, (EMC) (Article 3.1(b)), and Radio (Article 3.2). A Notified Body Opinion has been issued.  The BC127 has also been tested and granted approval under the directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment 2002/95/EC (commonly referred to as the Restriction of Hazardous Substances Directive or RoHS). This certification ensures the module is environmental safe and free from hazardous substances (including Lead).  Both certifications are applicable in all the 27 countries of the European Economic Area. Labelling and Documentation  Products complying with all relevant essential requirements shall bear the CE conformity marking accompanied by the identification number BC127  The RoHS certification does not dictate any specific product labelling. However, we recommend marking the product with a "RoHS Compliant" statement.  R&TTE Directive requires a manufacturer to establish technical documentation. It must be kept by the manufacturer or his authorised representative in the EU for at least 10 years after the last product has been manufactured. The documentation must cover:  a general description of the product,  conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits and other design documentation,  descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,  a list of the standards referred to in Article 5, applied in full or in part, and descriptions and explanations of the solutions adopted to meet the essential requirements of the Directive where such standards  results of design calculations made, examinations carried out, etc.,  test reports.
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 14 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet  Test reports must include the following table containing the BC127 tests: Certification Standards Article Laboratory Report Number Date Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011  (3.1(a)) Health EN 62479 ：2010 EMC EN 301 489-1 V1.9.2 (2011-09); EN 301 489-17 V2.1.1 (2009-05) (3.1(b)) Radio EN 300 328 V1.7.1 (2006-10) (3.2)  For further labelling and CE marking requirements please review the R&TTE Compliance Association Technical Guidance: http://rtteca.com/ For further information regarding the R&TTE certification requirements please review the following websites: Radio and Telecommunications Terminal Equipment (R&TTE): http://ec.europa.eu/enterprise/rtte/index_en.htm European Conference of Postal and Telecommunications Administrations (CEPT): http://www.cept.org European Telecommunications Standards Institute (ETSI): http://www.etsi.org European Radio Communications Office (ERO): http://www.ero.dk
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 15 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Canada - IC  In case no other intentional or un-intentional radiator is incorporated, the BC127's IC certification allows users to integrate the module into products without the need to obtain subsequent and separate approval.  The BC127 has been tested and granted approval under Industry Canada (IC) Radio Standards Specification (RSS) RSS-210, RSSGen and ICES-003. This certification is applicable in Canada. Labelling and Documentation  The BC127 has been labelled with its own IC ID number. In order to the extend the certification granted to the BC127, its CE ID number must be displayed on the finished product in which the module is integrated. The following wording should be used "Contains Transmitter Module IC"  The user-manual for any product in which the BC127 is integrated in must include the following statements: This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante  For further labelling and IC marking requirements please review the Industry Canada website: http://www.ic.gc.ca/
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 16 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Bluetooth Qualification Program (BQP)  In case no other non-certified Bluetooth components are incorporated, the BC127's BQP marking certification allows users to integrate the module into products without the need to obtain subsequent and separate approval.  The BC127 has been approved by the Bluetooth Qualification Body (BQB) to use the Bluetooth trademark and to offer official Bluetooth functionality. The approval according to the V4.0B Bluetooth specification confirms that the module complies with the Bluetooth specification and will successfully operate with other products supporting the same profile. BQP certification also ensures that the module has gone through safety assessment. This certification was granted through a combination of product performance testing and interoperability testing. This certification applies globally. Labelling  Products complying with all relevant requirements are allowed to bear the official Bluetooth logo For further information regarding the BQP certification requirements please review the following websites: Bluetooth Special Interest Group: https://www.bluetooth.org/apps/content/ Notes:  Changes or modifications that are made to the module circuitry can hinder the certification  Installers must comply with all of the instructions provided by the certification agency, which indicate installation and/or operating conditions necessary for compliance  It is important to note that the finished product is required to comply with all applicable authorizations regulations and requirement that is not associated with the BC127 module, including non-intentional transmitting modules and other intentionally transmitting modules.  The previous section represents BlueCreation interpretation of the salient issues of the certifications. For full details of the certification please refer to the local agencies' websites. Where there is any difference between this document and the local agencies' website, the subsequent should be followed.  At the time of writing this document FCC, CE and BQP certification were still processed by the relevant authorities.
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 17 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet Ordering Information Part number BC127 Order number Description BC127 Class2 Bluetooth 4.0 Module with integrated chip Antenna BC127-A Class2 Bluetooth 4.0 Module with integrated Antenna and connection to iOS BC127-DEVKIT-001 Development kit for the BC127 module BC127-DEVKIT-A-001 Development kit for the BC127-AI module General Notes  BlueCreation's products are not authorised for use in life-support or safety-critical applications. Use in such applications is done at the sole discretion of the customer. BlueCreation will not warrant the use of its devices in such applications.  While every care has been taken to ensure the accuracy of the contents of this document, BlueCreation cannot accept responsibility for any errors. BlueCreation reserves the right to make modifications, corrections and any other changes to its products at any time. Customers should obtain the latest information before placing orders.  BlueCreation, other products, services and names used in this document may have been trademarked by their respective owners. The publication of this information does not imply that any license is granted under any patent or other rights owned by BlueCreation.  Refer to www.blue-creation.com for more information. BlueCreation® is a trading name for Cambridge Executive Limited.
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 18 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet
BlueCreation. St John’s Innovation Centre Cowley Road Cambridge CB4 0WS United Kingdom 19 t. +44 (0)1223 420 252 e. info@blue-creation.com www.blue-creation.com BC127 Datasheet

Navigation menu