Cambridge Silicon Radio CNS1004 Bluetooth Low Energy Retail Tag User Manual User manual CNS1004x

Cambridge Silicon Radio Ltd Bluetooth Low Energy Retail Tag User manual CNS1004x

user guide

Retail Tag instructions
Page 1 of 2
© Cambridge Silicon Radio Limited
2013
CS
-
00000
-
RPPA
Introduction
The CSR CNS1004 Retail tag is a standalone device, designed to be maintenance free, there are no
user serviceable parts in the device. The CSR retail tag uses the ISDN band of 2.4GHz to 2.5HZ to
operate, uses extremely low power , the power output will be no more than 0dBm, which enables
the battery life to be extended. The typical battery life for the device is 6 months.
The retail tag is design to be positioned on or near to a product on a shelf in a store. The Retail tags
sole function is to transmit a pre-set unique number, which will allow a simple application loaded
onto a smart phone to link to a website which would provide advertising and / or technical details
about the product the retail tag has been positioned close too.
The retails tag can be positioned on the shelf or under it, it can be positioned near to the product or
tied to the product using a simple cable tie.
The Retail tag is shipped with its batteries installed; simply switch the unit on (unit will beep once to
indicate it is on). The unit is now operating and there is no further action needed by the user. The
user will now only need to link the unique number used by the application on the smart phone to
the relevant website or webpage which provides the information the user which to provide.
Additional information
FCC Rules Part 15
The enclosed hardware device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Compliance Statement:
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in residential installations. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause interference to radio or television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Retail Tag instructions
Page 2 of 2
© Cambridge Silicon Radio Limited
2013
CS
-
00000
-
RPPA
-Consult the dealer or an experienced radio/TV technician for help
To assure continued compliance, any changes or responsible for compliance could void the users
authority to operate this equipment. (Example- use only shielded interface cables when connecting
to a computer or peripheral devices).
Caution! The manufacturer is not responsible for any radio or TV interference caused by
unauthorized could void the users authority to operate the equipment.
Contacts
General information www.csr.com
Information on this product sales@csr.com
Customer support for this product www.csrsupport.com
More detail on compliance and standards product.compliance@csr.com
Help with this document comments@csr.com
Trademarks, Patents and Licences
Unless otherwise stated, words and logos marked with ™ or ® are trademarks registered or owned
by CSR plc and/or its affiliates.
Other products, services and names used in this document may have been trademarked by their
respective owners.
The publication of this information does not imply that any licence is granted under any patent or
other rights owned by CSR plc or its affiliates.
CSR reserves the right to make technical changes to its products as part of its development
programme.
While every care has been taken to ensure the accuracy of the contents of this document, CSR
cannot accept responsibility for any errors.
Life Support Policy and Use in Safety-critical Compliance
CSR’s products are not authorised for use in life-support or safety-critical applications. Use in such
applications is done at the sole discretion of the customer. CSR will not warrant the use of its devices
in such applications.
Performance and Conformance
Refer to www.csrsupport.com for compliance and conformance to standards information.

Navigation menu