Camos CAMOS-BHS700D BLUETOOTH 2 CHANNEL HEADSET User Manual BHS 700 manual ENG
Camos Co., Ltd. BLUETOOTH 2 CHANNEL HEADSET BHS 700 manual ENG
Camos >
USERS MANUAL
BHS-700D 2 CHANNEL HEADSET INSTRUCTION MANUAL INSTRUCTION MANUAL Ver. 1.0 Printed in Korea REGULATORY INFORMATION Preliminary Remarks Thank you for purchasing our product. This manual is for BHS-700D. Please read this instruction manual thoroughly for proper usages and application before connecting and operating the equipment. CAMOS owns all intellectual property rights including copyrights instruction manual, hardware and related software of BHS-700D which will be protected by the Copyright Act. Without CAMOS's written permission, they cannot be copied, re-printed or translated into other languages. Design and specifications are subject to change with notice. Warranty Manufacture would not take any responsibilities on the sales of products nor entrust the responsibilities to the 3rd party. Product warranty shall not apply to any failure or malfunction which results from improper maintenance, operation, unauthorized modification of product. CAMOS warrants the quality of product for a one year. Though the product is still under warranty period, repairing of products results from any of the following events; 1) Improper maintenance 2) Modification or replace of parts in the user's disposition 3) Using improper power source 4) Natural disaster including flood, fire, and earthquake • FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation. • Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio Frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures ; - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. • FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. 5) Replacement of expendable parts Warranty only covers the manufactured goods. Repairs after warranty period is finished, repairs will be charged to the users. Please contact the distributor and service center for A/S. Hereby, [CAMOS], declares that this [Motorcycle Bluetooth System(BHS-700D)] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. How to use Bluetooth System CONTENTS Connect two or more Bluetooth device on wireless network system via subsequent PIN code process. Once Bluetooth devices are connected, you are free to listen to music or have a SAFETY RULES Safety rules .......................................................................6 phone call visa Bluetooth headsets or transfer data without any cables. PREPARATION What is Bluetooth? Bluetooth wireless technology is a short-range communications technology intended to replace the cables connecting portable and/or fixed devices while communicate in and exchanging data with each other. • Noise or Interruption can occur depending on the environment. _When holding bluetooth while wearing the headset on ears or whiling holding a cell phone, the human body can interrupt the signals between the devices. Composition ......................................................................8 Headset charge ..................................................................8 Product function check ........................................................9 Name and function of each part ............................................10 KEY operating time and beep operating state ...........................11 Headset mounting and dismounting .......................................11 Headset custody .................................................................11 _When the bluetooth main body, headsets, cell phone hands-free of external signal receptor touches the human body. _When the wall of furniture blocks the signal. _When medical device, microwave of wireless internet interrupt the signal in the same range of frequencies. • When the bluetooth main body, headsets, cell phone hands-free or external signal receptor gets parts further than the limited distance, the pairing between the devices can be disconnected. • Place the bluetooth main body and other bluetooth device near while pairing each other. • Noise or interruption of signal transfer can occur on underground or in the region near transmission tower, satellite dish or industrial areas. OPERATION Headset power ON/OFF ......................................................12 Volume UP/DOWN .............................................................12 Headset registration and connection method ..........................12 Function directions _To answer the phone ......................................................14 _To call .........................................................................14 _To listen to music ...........................................................15 _To talk .........................................................................15 _To talk between music playing ..........................................16 _To speak over the telephone between music playing ..............16 _To speak over the telephone between conversation ..............17 • Bluetooth system may not be compatible with some navigation system or GPS system. • The volume of speaker of Bluetooth headset can be low due the wind sound while over-speeding. Please observe the speed limit. APPENDIX Battery charging and standard use time .................................18 Specification and feature ....................................................18 SAFETY RULES SAFETY RULES Please read the “Safety Rules” carefully before using this product. Following of the safety rules prevents users from any damage related with the misuse of this product. It is very important that users follow these safety rules. We state “Caution” and “Warning” to clarify any potential for damage associated with misuse of the product. About signs Warning May cause bodily harm or even death if users ignore warnings in the safety rules. Caution “Precautions” May cause bodily harm or even death if users ignore cautions in the safety rules. Caution Do not put the product in place where sudden temperature increase occurs such as the vehicle’s dashboard. Keep the product strongly in the helmet. - It may cause to separate from the helmet. “Do Not” Clean the product often. - Dust in the area may cause fire. “Follow Directions Carefully” Do not place elctric cord near a heating product. - The cord surface may melt and cause fire and(or) electric shock. Unplug the product and remove cords when moving. - It may damage cords and cause fire and(or) electric shock. Warning Place the product where it doesn’t prevent the driver from driving. - The driver’s view of sight should not be blocked. Do not use in bathtub. Do not pull the plug with wet hands. - This may cause electric shock. Do not use unapproved power voltage. - This may cause fire or electric shock. Do not get product wet and operate with wet hands. - This may cause electric shock. Do not use damaged electric cord. - This may cause fire and(or) electric shock. Be careful when thunder and lightening occurs. - There is a danger of electric shock. Do not get product wet and operate with wet hands. - This may cause electric shock. Do not put pins or needles into the product or electric cord of product. - If this happens, stop the product operation immediately. Continuous use may cause fire, electric shock and(or) malfunction. Stop using the product immediately when you drop it or damage the outside shell. - Continuous use may cause fire, electric shock and(or) malfunction. Do not attempt to open, disassemble or repair the product by any person except an authorized service dealer. - This may cause electric shock and(or) malfunction. You should request an authorized service dealer for any inspection and repair of the product. Do not pul the cord line when you unplug it. - Damaged cords may cause fire and(or) electric shock. Unplug the product when you don’t use it for a long time. - Damaged cords may cause fire and(or) electric shock. Do not place the product where high temperature and(or) the direct ray of the sun occurs. - This may cause fire, electric shock and(or) malfunction. Do not put the product in an unstable place where the product may be exposed to shock and(or) impact. - The product may fall and be damaged. Keep electric cord properly positioned. - An improperly positioned electric cord may cause fire or electric shock when metal material is in contact with power source. If you find any strange occurrences or malfunction in the product or any foreign substance gets into the product, please contact the authorized retailer where you purchased the product. Do not use the product in the following locations. - This may cause malfunction. In direct rays of the sun and near heating products High in humidity and with bad ventilation Dusty or oily locations Low temperatures Unstable environment PREPARATION PREPARATION • Composition • Product function check Phone Feature BHS-700 STEREO HEADSET INSTRUCTION MANUAL Music Feature ∙ Auto answer call function ∙ Stop music function ∙ Dialing function ∙ Play music function _Last number redialing Bluetooth DC Adaptor Charger(USB) Bracket Instruction Manual ∙ Volume control(UP/DOWN) _Transfer Dialing _Voice Dialing ∙ End Call function ∙ Volume control(Up/Down) Earphone Microphone A (OPTION) Microphone B (OPTION) Talk Feature ∙ Conversation function between Driver and Passenger ∙ Mobilephone call function during the conversation between the Driver and Passenger. - Since phone call is on priority, the Driver and Passenger conversation will be on mute during the call ∙ Stop talk function ∙ Start talk function • Headset charge Li-Polymer Battery is included to this Headset. Use to fill up perfectly Battery after buying product. ∙ Display device : RED LED ∙ When it is charging RED LED is lighted up, and when it is ended RED LED is turned off lights. ∙ Separate charger and Headset when LED is turned off lights. ∙ When battery is lack, Beep sound rings until charged. Should use the DC adapter(USB Type) provided by CAMOS. It could be occurred breakdown or damage if use adaptor that is not approved. PREPARATION PREPARATION • KEY operating time and Beep operating state • Name and function of each part Mode Channel Time LED Status BEEP Power ON CH1 3 sec. Flashing for 2 sec., then stand-by mode 4 times CH2 3 sec. Flashing for 2 sec., then stand-by mode 4 times CH1 3 sec. Flashing for 2 sec., in every 100ms 4 times CH2 3 sec. Flashing for 2 sec., in every 100ms 4 times 1. Name of each part Power OFF (+) KEY Stand-by (-) KEY Pairing MASTER(M) KEY BRACKET JOINT DC IN(USB) 2. Function of each part No KEY (+) KEY (-) KEY TALK KEY [(T) KEY] MASTER KEY [(M) KEY] RESET KEY FUNCTION CH 1 CH1/CH2 Every 100ms 1x flashing / sec. CH1/CH2 Every 100ms 1x flashing / sec. CH1 7 sec. Flashing in every 100ms until completed(Max 3 min.) 5 times 5 times CH2 7 sec. Flashing in every 100ms until completed(Max 3 min.) Master Setting CH2 7 sec. Connected CH1/CH2 4 times sound RESET KEY TALK KEY KEY Dialing CH1 Flashing for 2 sec. in every 100ms During phone call CH1 Play Music CH1 Flashing twice for three times once While Playing Music CH1 Intercom Communication CH2 Last Number Dialing CH1 Quick Flashing for 1 sec. in every 100ms once Voice Dialing CH1 2 sec. twice Transfer Call CH1 2 sec. Flashing for 1 sec. in every 100ms twice End Call CH1 Quick once Music Play/Stop CH1 3 sec. Flashing twice for three times while playing twice Intercom Start/Stop CH2 1 sec. once Low Battery Status Interval beeping every 30 sec. twice Charging Red LED ON before fully charged. CH 2 ∙ Volume UP ∙ Power ON / OFF ∙ Volume UP ∙ CH2 Pairing ∙ Power ON / OFF ∙ Volume DOWN ∙ CH1 Pairing ∙ Volume DOWN ∙ Last number redialing ∙ Transfer dialing ∙ Voice dialing ∙ End call • Headset mounting and dismounting I. Push up the Bluetooth main body into the bracket. II. Fix the bracket in the lower part of the helmet by using clips provided. Refer to the figure right. ––– • Headset custody ––– ∙ MASTER Setting ∙ Function that do Power OFF in various active states 10 ∙ Keep where power secures by state that turn off. ∙ Keep to avoid high temperature, direct ray of light, lower than 50℃ or hot vehicles inside etc. Performance of product is fallen if keep at high temperature and Battery life can decrease. ∙ Parts offered with product keep in dry place that moisture or moisture does not exist. 11 OPERATION OPERATION • Headset POWER ON/OFF 2. Connecting Headset with Audio Device This Headset is operated particularly CHs with POWER ON/OFF as below. When POWER ON, press the preferred CH's KEY for 3 sec. then be POWER ON. Press again for 3 sec. then be POWER OFF. (Details contents : 9 page KEY operating Time and Beep operating state) CH 1 CH 2 (-) KEY ∙ Power ON : Press for 3 sec. ∙ Power OFF : Press for 3 sec. ––– (+) KEY ––– ∙ Power ON : Press for 3 sec. ∙ Power OFF : Press for 3 sec. 1) Press (-)KEY on the CH1 headset for 7 seconds while the power is off.(Pairing mode) 2) Refer to the instruction manual of Audio device and then connect Headset after searching and registration. ∙ In order to disconnect the audio device, uncheck the bluetooth option on the audio device. Turn off the headset power and it will be automatically connected when the power is back on. 3. Connecting Headset with Headset : between CH2 and CH2 • Volume UP/DOWN Press (+)KEY or (-)KEY to control volume while operates. Volume control is available in operation state. Remark : The volume lever for the conversation between CH2 is fixed, therefore volume is not adjustable. 1) For one headset, press (+)KEY for 7 seconds while the power is off to set as a slave mode.(Slave mode setting) 2) For other headset, press (M)KEY + (+)KEY for 7 seconds while the power is off to set as a master mode.(Master mode setting) ∙ Connect with CH1 of Headset when use to connect Headset with Bluetooth device. • Headset registration and connection method (ex. Cellular phone) Should register Headset to Bluetooth device(ex. Cellular phone) to use Headset. Registration is process connecting via certification that is encrypted between two devices that Bluetooth function is. ∙ Connect with CH2 of Headset when use to connect Headset with Headset. ∙ Select "MOTOSONIC-700BH" in searched device list. ∙ Should connect to Bluetooth device that register to connect (or, after connection cancellation) Headset after registration. ∙ When connect with a preferred device, at first POWER OFF the connected Bluetooth. 1. Connecting Headset with cellular phone ∙ Once connected device is connected automatically when POWER ON. (this CH2 of Headset does not available to connect with other Bluetooth devices) (When Headset is already connected with other device it does not operate Pairing Mode) 1) Press (-)KEY on the CH1 headset for 7 seconds while the power is off.(Pairing mode) 2) Refer to the instruction manual of cellular phone and then connect Headset after searching and registration. ∙ Refer to the Instruction manual of cellular phone to replay music files that is built-in to cellular phone and to listen to music. ∙ In order to disconnect the cellular phone, uncheck the bluetooth option on the cellular phone. Turn the headset power and bluetooth will be automatically connected with audio device when the power is back one. 12 13 OPERATION OPERATION • Function direction 3. To listen to music 1. To answer the phone 1) When completed the connection Headset with Celluar phone, become to answer / to call state. 2) The function of Auto Answer Call is included this Headset, does not need additional key operating to answer because is received automatically. 3) Press [TALK KEY] shortly to disconnect on a headset. 1) To listen to music files stored to a cellular phone through Headset _Connect Headset with Cellular phone( Audio built-in). _Please refer to the cellular phone manual to find how to select the "mp3" mode to play. _To stop the music press [(-)KEY] and [(+)KEY] for 3 sec at same time. _To play the music again press [(-)KEY] and [(+)KEY] for 3 sec. at same time. Based on kinds of Cellular phone, maybe only MP3 file s are played Check the format if the stored music file s are MP3 or not. 2. To call 1) Last Number Dialing _Shortly press [Talk KEY] to use the function of last number dialing. 2) Call Transfer _If press [TALK KEY] for 2 sec. in current cellular phone calling , telephone is connected to Headset. _If press [TALK KEY] for 2 sec. again, can move to current cellular phone calling. 3) Voice Dialing _If press [TALK KEY] for 2 sec., voice information is announced. This time, should operate following voice information to call. ∙ Please refer to the instructional manual of each cellular phone for voice dialing. Voice Dialing option of bluetooth is only available for the cellular phones that has the voice dialing option and registered for the stereo headset service. ∙ If cellular phone is disconnected due to the long distant between the headset and cellular phone the call will be automatically connected when these two equipments get near within distance of 10m within 30min. ∙ When 30 minutes are passed, press [(+)KEY or (-)KEY] shortly. It will be re-connected, starting receiving signals again. When failed to connect, POWER OFF then ON again for pairing. 14 2) To listen to music files stored to an Audio Device through Headset _Connect Headset with an Audio device. _Please refer to the audio device manual to play the music. _To stop the music press [(-)KEY] and [(+)KEY] for 3 sec. at same time. _To listen the music press [(-)KEY] and [(+)KEY] for 3 sec. at same time. ∙ Even if press [(-)KEY] and [(+)KEY] for 3 sec. at same time then music is stopped, the Audio Device is playing continuously. ∙ Based on kinds of Cellular phone, maybe only MP3 files are played. ∙ Stopping / Playing by pressing [(-)KEY] and [(+)KEY] for 3 seconds is only possible on "MUSIC MODE". 4. To talk _When completed to connect Headset(CH2) with Headset(CH2), become to Talk. _To stop to Talk, press [(-)KEY] and [(+)KEY] for 1 sec. at same time. _To talk again, press [(-)KEY] and [(+)KEY] for 1 sec. at same time. ∙ The volume of conversation between CH2 is not adjustable. 15 OPERATION OPERATION 5. To talk between music playing _Connect Headset with Cellular phone or Audio Device then make to listen to music. _Connect Headset(CH2) with Headset(CH2) then make to Talk. _When sensed the Audio signal while listen to music, Music is in Mute state and become to talk between Headsets. _To stop to talk press [(-)KEY] and [(+)KEY] for 1 sec. at same time. This time, start again after 10 sec. to listen to music of Mute state. _To talk again, press [(-)KEY] and [(+)KEY] for 1 sec. at same time. ∙ If CH2 conversation is started in the middle of playing the mp3, the music will turn to mute mode. ∙ After or during the conversation, if there is no sound for 10 seconds, music will be play with proper volume. ∙ When the user hangs up the phone call by pressing [TALK KEY] on the headset shortly, the stopped audio device will be back on the playing mode. ∙ In order to connect the headset with Audio device and cellular phone at the same times, please use the audio device that only supports the stereo. ∙ When press once [TALK KEY] shortly, the music is disconnected and cellular phone returns to call to last number based on kinds of cellular phone, should press twice [TALK KEY]. ∙ If power is turned off or the cellular phone is away from the headset for more than 10m while music is being played, note that these two devices will be disconnected and the music will become mute. 6. To speak over the telephone between music playing 1) To speak over the telephone between playing music files stored to Cellular phone _Connect Headset with Cellular phone built-in Audio, then make to listen to music. _Connect Headset with Cellular phone. _If there is an in-coming call while music is played, the music will be stopped and turn to conversation mode. ∙ When the user hangs up the phone call by pressing [TALK KEY] on the headset shortly, the stopped audio device will be back on the playing mode. ∙ If the user dials to make a phone call by pressing the [TALK KEY], the music would not be played automatically. If the user desires to play the music, press [(+) and (-) KEY] at the same time for 3 seconds. 7. To speak over the telephone between conversation _Connect Headset(CH2) with Headset(CH2) then make to Talk. _Connect Headset with Cellular phone. _If there is an in-coming call to the cellular phone, the conversation will be on mute for the cellular phone call. _When the call is hung up, conversation mode will be back on. ∙ Conversation and phone call at the same time is not allowed. 2) To speak over the telephone while replay the music files stored to Audio Device _At first, register Headset to cellular phone. _Release Bluetooth mode of cellular phone. _Connect Headset with audio device then make listen to music. _Set up Bluetooth ON mode of cellular phone so that connect Headset with cellular phone. _When in-coming the signal of cellular phone while listen to music, music is disconnected then start to speak over the telephone. 16 17 APPENDIX APPENDIX • For more enjoyable use of bluetooth device... • Battery charging and standard use time Charging time Standard use time Call waiting time About 3 hours Speak / Play / Conversation Play + Conversation 120 hours(when the call is connected) 13 hours • Specification and Feature POWER SOURCE VERSION CODEC Frequency Range 3.7V (Ni-Polymer Battery) Version 2.0 Stereo 8 hours 1. The best condition to listen to music while driving : 1) Open face helmet : Below 50km/h 2) Closed helmet : Below 90km/h 2. The best condition to have a phone call or intercom conversation while driving : 1) Open face helmet : Below 60km/h 2) Closed helmet : Below 100km/h 2.4GHz ISM Band (2.402 ~ 2.480GHz) BLUETOOTH Raw Data Rate Class Out Power 1 Mbps Class II (max. 10 meter) 0.25mW ~ 2.5mW Speaker Output 2.5Φ Headphone jack Dimension (mm) 000(W) x 000(H) x 000(D) Weight (g) Operating Temperature 000 -20°C ~ 50°C Adapter Input AC 100 ~ 240V, 50/60Hz Adapter Output DC 5V, 500mA (USB type) 3. Crackling Noise 1) When the headset is being paired with other bluetooth devices. 2) When the distance between the headset and other bluetooth device is further than 10m. 3) When passing the strongly radio signal interference area. 4) When the pairing between the CH1 and CH2 is disconnected. 5) When several bluetooth devices are being used at the same time. 4. For proper use of device 1) Install the headset where each driver and passenger can see. (ex. On the same side of helmet) 2) Place the cell phone which is paired with CH1 on the back packet on the pants or pocket on the shirts. 18 19 MEMO MEMO
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creation Date--Text : Producer : Corel PDF Engine Version 1.0.0.536 Mod Date--Text : Creator Tool : CorelDRAW 버전 12.0 Modify Date : 2007:10:22 17:32:25+09:00 Metadata Date : 2007:10:22 17:32:25+09:00 Format : application/pdf Title : BHS-700_manual(ENG).cdr Document ID : uuid:a712132f-d1a9-43b4-8ac3-b29568de4161 Instance ID : uuid:24fa3022-2ec2-4e9e-978d-acd06ac46b13 Page Count : 11 Create Date : D:20070829093256 Creator : CorelDRAW 버전 12.0EXIF Metadata provided by EXIF.tools