Cannice Technology AS-R Bluetooth Earphone User Manual
Shenzhen Cannice Technology Co., Ltd. Bluetooth Earphone Users Manual
Users Manual
Start here Product overview Following items are included Charging Your new earphone has enough power to pair and make a few calls. It takes 2 hours to fully charge the earphone; while charging, the battery indicator light is red, the indicator light flashes blue once charging is complete. 1. Charge jack 2. Multifunction button Bluetooth Earphone 3. Talking mic Note: The lifetime of the battery will be significantly reduced if your earphone is left uncharged for a long period. We recommend that you recharge your earphone at least once a month. 4. Battery & Status indicator USB cable Ear cushions AS INSTRUCTION Basic operation Music Use Power on (Need media player support). Press and hold Multifunction button for about 3 seconds in off state. The earphone says "power on" and the LED stays blue 2 senconds. Music play / pause Power on LED status Voice prompts Stay blue about two second Power on Power off Press Multifunction button once to play / pause music. (Some phones may require you to start a media player first) . Power off Stay red about two second Standby Stays on blue Volume up / down Pairing Flashes red and blue alternately In streaming mode or calling mode double press the multifunction button ,the volume change from small to large step by step , from large to small all at once. Incoming call Flashes blue quickly Ring tone Blue LED turn to Red low Battery, please charge Stays on red while charging. Stays on blue after fully charged. Track forward Answer a call Press and hold the multifunction button for 2 seconds in streaming state. Hard reset Power off Press and hold Multifunction button for about 5 seconds in open state. The earphone says "power off" and the LED stays red 2 senconds. Tips: When the distance between the earphone and phone is beyond effective range, earphone disconnects with phone. Earphone will power off automatically once no active for 5 minutes. Charging Press the multifunction button once. Reject a call Battery low When a call rings during a music playing, the music automatically pauses to allow you to answer or ignore the call. Once the call is ignored or ends, the music is resumed. End a call Press the Multifunction button once. 11 12 Do not use earphone in thunderstorm weather, the earphone may not work properly in the condition, and increase the risk of being hit by lightning . iPhone Earphone may not work properly under high temperature or high humidity conditions. a.On your phone, open the Settings menu. b.Select Bluetooth. If Bluetooth is off, turn it on. The iPhone will search for new devices automatically. Do not use any corrosive cleaner/oil to clean the earphone. Android phone If the earphone comes in contact with liquids, quickly wipe away .If submersed in water, do not turn the earphone on until completely dried. Tips: liquid submersion voids the warranty. Search a.On your phone, open the Settings menu. b.Select Bluetooth (For old Android phone, Bluetooth is found in the Wireless & Networks). If Bluetooth is off, turn it on. Select Search for Devices if your phone does not automatically search for new devices. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds. 1.After power on L/R earphones re-conneted automatically, than the L earphones enter pairing mode. 2.Activate Bluetooth on your phone (See below for more details). AS Using earphone at high to moderate volumes for extended periods of time will result in permanent hearing damage .It is advised you keep volume levels moderate to low at all times for your safety. Note: When the earphone and phone have been paired once, they will automatically connect when the earphone is on and Bluetooth is activated on the phone. Bluetooth ON Search Safety and care Pair one phone a.On your phone, open the Settings menu. b.Select Bluetooth. If Bluetooth is off, turn it on. The Phone will search for new devices automatically. BluetoothO N AS Pairing Windows Phone 8 Pairing If the earphone cannot be turned on even when fully charged or does not respond during use, follow the instructions below to reset it. 1.While pressing and holding the multifunction button, connect the earphone to your PC's USB port or a USB power adapter with the charging cable. 2.Keep pressing and holding the Multifunction button until the earphone turns on. The earphone is now reset. Switch Music and Call Press and hold the Multifunction button for about 2 seconds. 3. Select "AS". If your phone asks, enter 0000 (four zeros) for the Pass code or accept the connection. The LED indicator stops flashing red and blue once successfully paired, you hear "connected". Some phone list an option to "Play through earphone", select to use the earphones. Status indicator Instruction Keep the earphone and packaging out of reach of children . 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:b2d970ce-9c2c-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:08 19:03:38Z Create Date : 2017:07:08 19:03:38Z Creator Tool : UnknownApplication Document ID : uuid:b2d970ce-9c2c-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools