Canon BM70659 Wireless LAN Module User Manual User s Manual of End Product

Download:
Mirror Download [FCC.gov]
Document ID	1491881
Application ID	ZDBe1RKTRXODHQ6O/Wy1/A==
Document Description	User's Manual of End Product
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.6kB (32482 bits)
Date Submitted	2011-06-29 00:00:00
Date Available	2011-12-26 00:00:00
Creation Date	2011-06-27 09:01:33
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2011-06-27 09:01:52
Document Title	05 (Short-Term Confidential) User's Manual of End Product.pdf
Document Creator	FrameMaker 9.0
Document Author:	40682

9. Regulatory information
EN 60601-1-4:1996+A1:1999
Medical electrical equipment - Part 1-4:Collateral
Standard:Programmable electrical medical systems
EN 60601-1-6:2007
Medical electrical equipment - Part 1-6:Collateral Standard:Usability
EN 60601-2-32:1994
Medical electrical equipment - Part 2: Particular requirements for the
safety of associated equipment of X-ray equipment
EN 62304:2006
Medical device software-Software life cycle processes
EN 62366:2008
Medical device - Application of usability engineering to medical
devices
EN ISO 14971:2009
Medical device - Application of risk management to medical devices
EN ISO 10993-1:2009/-5:2009/
10993-10:2009
Biological evaluation of medical devices Part 1: Evaluation and
testing within a risk management process
9-2. Radio frequency (RF) compliance information
U.S.A.
FCC Part 15 Subpart B Class A and Part 15 Subpart C/E
(RF Exposure).
Canada
RSS-210
European Union (and EEA) ETSI EN300 328
ETSI EN301 489
ETSI EN301 893
Australia
AS4268
Singapore
IDA TS SRD
„ FCC compliance (For U.S.A.)
Contains FCC ID:AZDBM70659
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference. And (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
5.15-5.25GHz band is restricted to indoor operations only.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
RF exposure compliance
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however, that
these low power wireless devices are absolutely safe. Low power wireless devices emit
low levels radio frequency energy (RF) in the microwave range while being used.
38
9. Regulatory information
Whereas high levels of RF can produce health effects (by heating tissue), exposure of
low-level RF that does not produce heating effects causes no known adverse health
effects. Many studies of low-level RF exposures have not found any biological effects.
Some studies have suggested that some biological effects might occur, but such
findings have not been confirmed by additional research. CXDI-• • • •Wireless
••
has been
tested and found to comply with FCC radiation exposure limits set forth for an
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65.
„ IC compliance (For Canada)
Contains IC:498J-BM70659
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
5.15-5.25GHz band is restricted to indoor operations only.
La bande 5 150-5 250 MHz est restreints à une utilisation à l'intérieur.
RF exposure compliance
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however, that
these low power wireless devices are absolutely safe. Low power Wireless devices
emit low levels of radio frequency energy (RF) in the microwave range while being
used. Whereas high levels of RF can produce health effects (by heating tissue),
exposure of low-level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low-level RF exposures have not found any
biological effects. Some studies have suggested that some biological effects might
occur, but such findings have not been confirmed by additional research. CXDI-• • • • • •
Wireless has been tested and found to comply with IC radiation exposure limits set
forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency
(RF) Exposure rules.
Les connaissances scientifiques dont nous disposons n'ont mis en évidence aucun
problème de santé associé à l'usage des appareils sans fil à faible puissance. Nous ne
sommes cependant pas en mesure de prouver que ces appareils sans fil à faible
puissance sont entièrement sans danger. Les appareils sans fil à faible puissance
émettent une énergie radioélectrique (RF) très faible dans le spectre des micro-ondes
lorsqu'ils sont utilisés. Alors qu'une dose élevée de RF peut avoir des effets sur la
santé (en chauffant les tissus), l'exposition à de faibles RF qui ne produisent pas de
chaleur n'a pas de mauvais effets connus sur la santé. De nombreuses études ont été
menées sur les expositions aux RF faibles et n'ont découvert aucun effet biologique.
Certaines études ont suggéré qu'il pouvait y avoir certains effets biologiques, mais ces
résultats n'ont pas été confirmés par des recherché supplémentaires. CXDI-• • • • • •
Wireless a été testé et jugé conforme aux limites d'exposition aux rayonnements
énoncées pour un environnement non contrôlé et respecte les règles d'exposition aux
fréquences radioélectriques (FR) RSS-102 de l'IC.
39

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 40682
Create Date                     : 2011:06:27 09:01:33+09:00
Modify Date                     : 2011:06:27 09:01:52+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2011:06:27 09:01:52+09:00
Creator Tool                    : FrameMaker 9.0
Format                          : application/pdf
Title                           : 05 (Short-Term Confidential) User's Manual of End Product.pdf
Creator                         : 40682
Document ID                     : uuid:2ae0c2ba-fdf0-4375-acd3-8be89b20c900
Instance ID                     : uuid:bc5821cb-cdcd-4bfd-abc0-23ee63cf832c
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Page Count                      : 2

EXIF Metadata provided by EXIF.tools