Canon Color Imageclass Mf9220Cdn Quick Start Guide Starter

Canon-Color-Imageclass-Mf9280Cdn-Quick-Start-Guide canon-color-imageclass-mf9280cdn-quick-start-guide

: Canon Canon-Color-Imageclass-Mf9220Cdn-Quick-Start-Guide canon-color-imageclass-mf9220cdn-quick-start-guide canon pdf

Open the PDF directly: View PDF .
Page Count: 64

Starter Guide

Overview of Machine Functions

Set Up the Machine to Suit Your Purposes

Set Up the Machine

Set Up Computers and Software

Appendix

Be sure to read the manual before using the machine.

The remarks for important safety instructions are

described in "Basic Operation Guide." Read the

manual also.

Keep the manual for future reference.

Read this guide rst.

Overview of Machine Functions .................................................................................................................... 1

Manuals for the Machine.....................................................................................................................................................1

1 Set Up the Machine to Suit Your Purposes ................................................................................................. 2

2 Set Up the Machine .......................................................................................................................................... 3

Unpack the Machine .......................................................................................................................................................3

Items Included with the Machine ...............................................................................................................................7

Optional Items ........................................................................................................................................................................7

Connect the LAN Cable ..................................................................................................................................................8

Compatible LAN Cables .......................................................................................................................................................8

Connect Power Cord and Turn on the Machine ....................................................................................................9

Start “Setup Guide” .........................................................................................................................................................11

Load Paper ........................................................................................................................................................................13

Optional Paper Drawer ......................................................................................................................................................16

Set Date and Time ..........................................................................................................................................................19

Make Fax Settings ...........................................................................................................................................................21

Register User Telephone Number and Unit Name ...................................................................................................22

Information About the Keys .............................................................................................................................................22

About Sender Information ...............................................................................................................................................24

Select the Receive Mode that Suits Your Needs .......................................................................................................25

About the Receive Modes .................................................................................................................................................25

Connect Telephone Cables .........................................................................................................................................28

If You Need to Use Pulse Dialing .....................................................................................................................................29

Adjust Color with “Auto Gradation Correction” ....................................................................................................30

Set Up Network Connection .......................................................................................................................................33

Set IP Address Manually ....................................................................................................................................................36

Finish “Setup Guide” .......................................................................................................................................................36

Change the Settings ...........................................................................................................................................................37

3 Set Up Computers and Software ................................................................................................................. 39

Types of Connection between Computers and the Machine .........................................................................39

About User Software CD-ROM ...................................................................................................................................40

Network Connection .....................................................................................................................................................42

Installation Procedure ........................................................................................................................................................42

Check Installation ................................................................................................................................................................50

Setting the ScanGear Tool ................................................................................................................................................50

USB Connection ..............................................................................................................................................................52

Installation Procedure ........................................................................................................................................................52

Check Installation ................................................................................................................................................................58

4 Appendix .......................................................................................................................................................... 59

User Manual CD-ROM (e-Manual) ............................................................................................................................59

System Requirements ........................................................................................................................................................59

Using the User Manual CD-ROM (e-Manual)..............................................................................................................59

Contents

1

This manual describes how to set the required settings to set up the machine and install the software. After you

set up the machine, you can use the functions described in the illustration shown bellow.

For the details of each function, refer to the Basic Operation Guide and e-Manual.

Overview of Machine Functions

Starter Guide (This Document): Machine setup and software installation. Read this guide before

operating this product.

Basic Operation Guide: Basic operation features.

e-Manual (located on the User Manual CD-ROM): Total operation features. (Also includes the Starter

Guide contents and the Basic Operation Guide contents.)

●

●

●

Manuals for the Machine

Unless otherwise mentioned, illustrations and screens used in this manual are those taken when no optional

equipment is attached to the Color imageCLASS MF9280Cdn or MF9220Cdn.

If there is any dierence between the Color imageCLASS MF9280Cdn and MF9220Cdn, it is clearly indicated in the

text for instance “Color imageCLASS MF9280Cdn Only.”

2

To use the functions (Copy, Fax, Direct Print, Scan to Media, PC Print, PC Fax, Scan, E-Mail, I-Fax,

Remote UI, Scan to File Server) of the machine, you need to make the settings in the owchart below.

For example, if you intend to use the copy function, you need to make the settings in “Machine Settings.”

p. 8

p. 3

p. 9

p. 19

p. 11

p. 13

p. 22

p. 25

p. 28

p. 30

p. 33

p. 36

p. 42 p. 52

1

Set Up the Machine to Suit Your Purposes

3

2 Set Up the Machine

Make sure that at least two people carry the machine.

3

4

Unpack the Machine

Remove all shipping tape and packing materials from the machine.

1

2

4

1 Settings Necessary to Use the Machines Functions

5

6 Open the front cover by using the handle (A).

The toner cartridges are installed in order of black, yellow,

cyan, and magenta.

7 To prevent damage to the transfer belt of the

delivery feeder unit (A), cover the thin plastic

belt with paper (LTR size paper is

recommended) as shown in the gure and be

sure that they do not move out of place.

When installing or removing the toner cartridges, be sure

to place the papers on the transfer belt (A) of the delivery

feeder unit to protect the belt.

Do not touch or place objects on the transfer belt (A) of

the delivery feeder unit. The transfer belt (A) comes with a

self cleaning function so do not wipe the transfer belt (A)

even when toner can be seen attached to the belt. If the

delivery feeder unit is broken or the transfer belt (A) is

damaged, this may result in misfeeds or deterioration in

print quality.

–

–

5

1 Settings Necessary to Use the Machines Functions

8 Hold the blue tabs on the both sides of toner

cartridge, and pull it horizontally.

Do not open the drum protective shutter (A).

Do not touch the high-voltage contact (A) or the electrical

contacts (B), as this may result in damage to the printer.

9 Gently rock the toner cartridge 5 or 6 times to

evenly distribute the toner inside.

If toner is not distributed evenly, this may result in

deterioration in print quality. Make sure to carry out this

procedure properly.

–

–

10 Place the toner cartridge on a at surface,

fold back the tab of the sealing tape (A)

located at left side of the toner cartridge.

11 Remove the sealing tape (approx. 18 7/8 inch

long) gently by hooking your nger into the

tab and pulling it out straight in the direction

of the arrow.

If toner is adhered to the removed seal, be careful not to

dirty your hands or clothing by touching it.

If your hands or clothes get dirty from touching the toner,

wash them immediately in cold water. Do not use hot

water. Doing so may cause the toner to set permanently.

12 Hook your nger into the tab and remove the

packing material (A) located at right side of

the toner cartridge.

–

–

6

1 Settings Necessary to Use the Machines Functions

13 Hold the toner cartridge properly by the blue

tabs on the both sides with the arrowed side

facing up.

Do not hold the toner cartridge in a manner that is not

described in this procedure.

14 Align the guides (A) of the toner cartridge

that you want to replace with the slots (B) to

which the label of the same color is attached,

then insert the cartridge until it stops.

15 Repeat steps for all 4 cartridges.

16 After removing all the packing materials from

each toner cartridge and installing the

cartridges, remove the papers on the transfer

belt of the delivery feeder unit.

When removing the paper, be careful not to touch or

damage the transfer belt of the delivery feeder unit.

17 Close the front cover.

If the front cover does not close properly, do not force it to

close. Open the cover and make sure the toner cartridge is

properly set in the machine.

7

1 Settings Necessary to Use the Machines Functions

Items Included with the Machine

Machine●Toner Cartridge×4 (black, yellow, cyan,

magenta) (Stored in the machine)

●Power Cord●

Limited Warranty Notice

Cartridge Warranty

Starter Guide (This Document)

Basic Operation Guide

UFRII LT/FAX User Software CD-ROM

PCL/PS User Software CD-ROM (Color

imageCLASS MF9280Cdn Only)

User Manual CD-ROM

Registration Card

Power Switch Label

●

●

●

●

●

●

●

●

●

Telephone Cable

●Customize Labels

* Size and form of the customize labels may vary

depending on the countries or regions you

purchased.

●

Optional Items

Cassette Paper Drawer

Cassette Feeding Unit-AC1●Cassette Feeding Unit-AC1

Setup Instruction

●

8

1 Settings Necessary to Use the Machines Functions

Connect the LAN Cable

Connect a LAN cable that is compatible with the LAN connector of this machine.

A category 5 or greater twisted pair LAN cable is compatible with the machine. Connect one end to the

10 Base-T/100 Base-TX port on the right side of the machine and the other end to a network router or a

hub.

Compatible LAN Cables

9

1 Settings Necessary to Use the Machines Functions

Connect Power Cord and Turn on the Machine

1 Connect the power cord to the rear socket on

the back side of the machine and to the wall

outlet, and press the [I] side of the main power

switch (A) to ON.

Make sure all shipping tape/packing materials on the

machine and tabs/tape on the toner cartridges have been

removed.

Do not connect the machine and the computer with a

USB cable at this time. Connect the machine and the

computer with a USB cable only during the software

installation procedure. (A USB cable is not used when the

machine is used via a network connection.)

If you want to use the optional paper drawer, connect the

Cassette Feeding Unit-AC1 to the machine before turning

on the machine. (For instructions on how to connect the

Cassette Feeding Unit-AC1, see “Cassette Feeding Unit-

AC1 Setup Instruction.”)

Apply the power switch label to the space above the main

power switch.

–

–

–

–

2 If the screen to select the language appears as

shown below, use [▼], [▲] or (Scroll Wheel)

to select a language, then press [OK].

The machine restarts automatically.

The language setting can be changed later.

Press (Main Menu) → <Additional Func.> → <Common

Settings> → <Language Switch> → <Done> → Select <On>

→ Select the desired language → Turn OFF the main power →

Restart the machine.

10

1 Settings Necessary to Use the Machines Functions

3 If the screen to select the country/region

appears as shown below, use [▼], [▲] or

(Scroll Wheel) to select a country/region,

then press [OK].

The machine restarts automatically.

Make sure that the country/region is set correctly for your

country/region.

If the country/region is not set or set incorrectly, you may

have problems in sending/receiving faxes.

The country/region setting can be changed later.

Press (Main Menu) → <Additional Func.> → <System

Management Set.> → <Communications Settings> →

<Select Country/Region> → <Done> → Select the country/

region → Turn OFF the main power → Restart the machine.

4 The “Setup Guide” automatically appears on the

display.

<Close the front cover.> is displayed:

Make sure that the front cover is closed properly. (See “Unpack the Machine,” on

p. 3.)

<Set Toner Cartridge Again> is displayed:

Make sure that the tabs are removed from the toner cartridges and toner

cartridges are properly installed to the machine. (See “Unpack the Machine,” on

p. 3.)

●

●

11

1 Settings Necessary to Use the Machines Functions

Start “Setup Guide”

The “Setup Guide” assists you in setting up the machine before using it.

When you turn on the machine for rst time, the “Setup Guide” automatically starts on the display.

Once the “Setup Guide” starts, it cannot be stopped.

If you turn o the machine while using the “Setup Guide,” turn on the machine and start the “Setup Guide” again.

Once you complete the “Setup Guide,” it does not start automatically when you turn on the machine.

You can restart the “Setup Guide” afterward from the user mode. (See “Change the Settings,” on p. 37.)

Information About the Keys

Press the Left/Right Any key to select the alternative key at the bottom of the display.

Press [▼] [▲] [◀] [▶] to move the cursor position.

Use (Scroll Wheel) to move the cursor position.

Press [OK] to set the entry or to proceed to the next screen.

Press [Back] to return to the previous screen.

* The Color imageCLASS MF9280Cdn is used for illustration purposes in this section.

–

–

–

–

–

●

‒

‒

‒

‒

‒

1 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

2 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

The screen explains how to operate the “Setup Guide”

using the keys on the operation panel.

For details on the key operation, see “Information About

the Keys,” above.

12

1 Settings Necessary to Use the Machines Functions

3 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

Check that all the packing materials are removed from the

main unit and the cartridges.

4 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

The auto obtain IP address function will enables the

machine to get the IP address after connecting the LAN

cable to the machine.

If the LAN cable has not been connected yet, connect it as

described in “Connect the LAN Cable,” on p. 8.

Connect the LAN cable when you use the machine to

share with a group through the network.

Connect the LAN cable even if you do not use the auto

obtain IP address function, because your network

environment requires the IP address to be set manually.

–

–

–

5 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

Do not connect the USB cable at this point even if you use

the machine as a local printer by directly connecting the

machine to the computer.

During the software installation procedure, you can connect

the USB cable. (When using the network function, the USB

cable is not required.)

6 Make sure the following screen is displayed on

the display.

Go to “Load Paper,” on p. 13.

If the toner cartridges have not been set in the machine or

the tabs and tape have not been removed from the toner

cartridges, the <Set Toner Cartridge Again> screen appears.

You will need to nish the cartridge installation before you

proceed. (See “Unpack the Machine,” on p. 3.)

13

1 Settings Necessary to Use the Machines Functions

Load Paper

This section describes the procedures for making paper and paper size settings in the “Setup Guide.” Animated

screens are included with each step described in the “Setup Guide.”

1 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

2 Pull out the paper drawer until it stops.

3 Hold the paper drawer with both hands and

remove it from the machine.

4 Press [OK] to proceed to the “Setup Guide.”

5 Hold the lock release lever of the side paper

guides (A) and slide the guides to the mark for

the size of the paper to be loaded. The side

paper guides move together.

Make sure to set the guides to the mark for the size of the

paper to be loaded correctly. If the guides are positioned

incorrectly, it may cause paper jams, dirty prints, etc.

6 Press [OK] to proceed to the “Setup Guide.”

7 Hold the lock release lever of the rear paper

guides (A) and slide the guides to the mark for

the size of the paper to be loaded.

Make sure to set the guides to the mark for the size of the

paper to be loaded correctly. If the guides are positioned

incorrectly, it may cause paper jams, dirty prints, etc.

8 Press [OK] to proceed to the “Setup Guide.”

14

1 Settings Necessary to Use the Machines Functions

9 Fan the paper stack and even the edges.

10 Load the paper stack of the appropriate size

with the print side facing up. Align the rear

edge of the paper stack with the rear paper

guide.

Make sure the paper stack does not exceed the load limit

mark (A).

The paper drawer holds approximately 250 sheets of

paper (20 lb (75 g/m2)).

11 Press [OK] to proceed to the “Setup Guide.”

–

–

12 Hold the paper drawer with both hands and

set it back into the machine.

13 Push the paper drawer as far as it will go.

For details on loading paper in the stack bypass tray, see

“Introduction of the Machine,” in the e-Manual.

If you loaded a size and/or type of paper that is dierent

from what you registered in the “Setup Guide,” you need

to change the paper settings on the machine. See

“Change the Settings,” on p. 37.

14 Press [OK] to proceed to the “Setup Guide.”

15 Make sure the following screen is displayed

on the display, then press [OK] to proceed to

the “Setup Guide.”

–

–

15

1 Settings Necessary to Use the Machines Functions

16 Use [▼], [▲] or (Scroll Wheel) to select the

paper size you loaded, then press [OK].

If you use inch size paper, press the left Any key to select

<A/B Sizes> and the paper size you want to use.

17 Use [▼], [▲] or (Scroll Wheel) to select the

paper type you loaded, then press [OK].

18 Make sure the following screen is displayed

on the display.

Go to “Set Date and Time,” on p. 19.

If the Optional Paper Drawer is installed in the machine, this

screen is not displayed. Go to “Optional Paper Drawer,” on

p. 16.

16

1 Settings Necessary to Use the Machines Functions

Optional Paper Drawer

When the Optional Paper Drawer is installed in the

machine, the procedure for setting up the Optional

Paper Drawer displays on the “Setup Guide.”

1 Pull out the optional paper drawer until it stops.

2 Hold the optional paper drawer with both

hands and remove it from the machine.

3 Press [OK] to proceed to the “Setup Guide.”

4 Hold the lock release lever of the side paper

guides (A) and slide the guides to the mark for

the size of the paper to be loaded. The side

paper guides move together.

Make sure to set the guides to the mark for the size of the

paper to be loaded correctly. If the guides are positioned

incorrectly, it may cause paper jams, dirty prints, etc.

5 Press [OK] to proceed to the “Setup Guide.”

6 Hold the lock release lever of the rear paper

guides (A) and slide the guides to the mark for

the size of the paper to be loaded.

IMake sure to set the guides to the mark for the size of the

paper to be loaded correctly. If the guides are positioned

incorrectly, it may cause paper jams, dirty prints, etc.

7 Press [OK] to proceed to the “Setup Guide.”

8 Fan the paper stack and even the edges.

9 Load the paper stack of the appropriate size

with the print side facing up. Align the rear edge

of paper stack with the rear paper guide.

17

1 Settings Necessary to Use the Machines Functions

Make sure the paper stack does not exceed the load limit

mark (A).

The optional paper drawer holds approximately 500

sheets of paper (20 lb (75 g/m2)).

10 Press [OK] to proceed to the “Setup Guide.”

11 Hold the optional paper drawer with both

hands and set it back into the machine.

12 Push the paper drawer as far as it will go.

For details on loading paper in the stack bypass tray, see

“Introduction of the Machine,” in the e-Manual.

If you loaded a size and/or type of paper that is dierent

from what you registered in the “Setup Guide,” you need

to change the paper settings on the machine. See

“Change the Settings,” on p. 37.

–

–

–

–

13 Press [OK] to proceed to the “Setup Guide.”

14 Make sure the following screen is displayed

on the display, then press [OK] to proceed to

the “Setup Guide.”

15 Use [▼], [▲] or (Scroll Wheel) to select the

paper size you loaded, then press [OK].

If you use inch size paper, press the left Any key to select

<A/B Sizes> and the paper size you want to use.

16 Use [▼], [▲] or (Scroll Wheel) to select the

paper type you loaded, then press [OK].

18

1 Settings Necessary to Use the Machines Functions

17 Use [▼], [▲] or (Scroll Wheel) to select

<Yes> or <No> for setting the default paper

drawer, then press [OK].

When you install paper drawer 2 (optional paper

drawer) that is usually used for copying, select <Yes>. If

you selected <No>, the default paper drawer (Standard

mode of copy) will be the paper drawer 1 (paper

drawer). (For details on the standard mode of copy, see

“Copy,” in the e-Manual.)

18 Make sure the following screen is displayed

on the display.

Go to “Set Date and Time,” on p. 19.

19

1 Settings Necessary to Use the Machines Functions

Set Date and Time

Before using the machine, you MUST set the current date and time. The date and time set are used as a standard

for timer settings functions.

Information About the Keys

Press – (numeric keys) to enter numbers.

Press [OK] to set the entry or to proceed to the next screen.

Press [Back] to return to the previous screen.

Press (Clear) to delete the entire entry.

* The Color imageCLASS MF9280Cdn is used for illustration purposes in this section.

●

‒

‒

‒

‒

1 Make sure the following screen displayed on the

display, then press [OK] to proceed to the “Setup

Guide.”

2 Use – (numeric keys) to enter the date

(month/day/year) and time (in 24-hour/military

time format), then press [OK].

20

1 Settings Necessary to Use the Machines Functions

3 Make sure the screen on the left is shown on the

display.

Go to “Make Fax Settings,” p. 21.

By default, <Daylight Saving Time Set.> in the <Timer

Settings> menu is set to <O>.

If you want to set <Daylight Saving Time Set.> to <On>,

see “Change the Settings,” on p. 37.

In the next setting, you will set the fax setting. If you do

not set the fax setting, select <Make Fax Settings Later>,

then go to “Adjust Color with ‘Auto Gradation

Correction’,” p. 30.

–

–

–

21

1 Settings Necessary to Use the Machines Functions

Make Fax Settings

This section describes the fax settings in the “Setup Guide.”

1 Make sure the following screen is displayed on

the display. Use [▼], [▲] or (Scroll Wheel) to

select <Make Fax Settings Now> or <Make Fax

Settings Later>.

A: If you use the fax function, select <Make Fax Settings

Now> then press [OK].

B: If you do not use the fax function, select <Make Fax

Settings Later>, then press [OK]. (Go to “Adjust Color

with ‘Auto Gradation Correction’,” p. 30.)

2 Make sure the following screen is displayed on

the display.

Go to “Register User Telephone Number and Unit

Name,” on p. 22.

22

1 Settings Necessary to Use the Machines Functions

Register User Telephone Number and Unit Name

This section describes the procedure for registering the user telephone number and unit name. Refer to the

“Information About the Keys” below.

Use the keys shown below to enter information in the machine.

* The Color imageCLASS MF9280Cdn is used for illustration purposes in this section.

You can enter the following characters in each input mode:

Press – (numeric keys) to enter

numbers.

Press the Left/Right Any key to select

the alternative key at the bottom of

the display.

Press [▼] [▲] [◀] [▶] to move the

cursor position.

Use (Scroll Wheel) to move the

cursor position.

Press [OK] to set the entry or to

proceed to the next screen.

Press [Back] to return to the previous

screen.

●

●

●

●

●

●

For screens that require alphanumeric entries.

Press [▼] [▲] [◀] [▶] and (Scroll Wheel) to move the highlighted cursor position.

<A/1>: Alphanumeric character entry mode

<Sym>: Symbol entry mode

Press [OK] to enter the highlighted character or space and to determine the entry mode.

You can also use – (numeric keys) to enter numbers.

Select <Backspace> by pressing the left Any key to clear the entered characters one by one.

Select <Set> by pressing the right Any key to complete the entry and return to the previous screen.

–

–

–

–

–

Information About the Keys

23

1 Settings Necessary to Use the Machines Functions

1 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

2 Use – (numeric keys) to enter your fax

number (up to 20 digits). To conrm your entry,

press the right Any key to select <Register> or

use [▼], [▲] or (Scroll Wheel) to select

register, then press [OK]. (For information on

how to enter characters, see p. 22.)

Following keys are available by selecting with [▼], [▲] or

(Scroll Wheel).

<Space>: Inserts a space.

<+>: Inserts a plus sign.

<Backspace>: Deletes the last number entered.

To delete all of the entered number, press (Clear).

3 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

4 Enter the unit name (your name, company

name, etc.) using [▼], [▲], [◀], [▶] or (Scroll

Wheel) to select the characters then press [OK]

to enter. To conrm your entry, press right Any

key to select <Set>. (For information on how to

enter characters, see p. 22.)

You can register only one unit name.

To delete the last entered characters, press the left Any

key to select <Backspace>.

To delete all of the entered characters, press (Clear).

–

–

–

24

1 Settings Necessary to Use the Machines Functions

Before sending documents, you MUST register your fax number, unit name, and the current date and time

in the machine. The sender information you register in the machine appears in the header of each page

received by the recipient.

About Sender Information

5 Make sure the following screen is displayed on

the display.

In the next setting, you will set the receive mode.

25

1 Settings Necessary to Use the Machines Functions

About the Receive Modes

<Auto RX>

Receives faxes automatically. When you use only the fax function,

select this mode without connecting an external telephone.

When Receiving FAX●

The machine receives

faxes automatically.

When Receiving VOICE CALL●

The machine does not

respond.

<Fax/Tel Auto Switch>

Automatically switches between fax calls and voice calls. The

machine receives faxes automatically and rings for voice calls.

When Receiving FAX●

The machine receives

faxes automatically.

When Receiving VOICE CALL●

The machine rings.

Answer the call.

<Answer Mode>

Receives faxes automatically and routes voice calls to the telephone

with built-in answering machine.

When Receiving FAX●

The telephone with

built-in answering

machine rings and the

machine receives faxes

automatically.

When Receiving VOICE CALL●

The telephone with

built-in answering

machine rings and records

voice messages.

<Manual RX>

Rings for every call, whether it is a fax call or a voice call. For a fax call,

you have to manually activate the machine to receive the fax.

When Receiving FAX●

The external phone rings.

To receive the fax, pick up

the receiver then select

<Send/Fax> → <Enter Fax

(New)> → <RX Start>.

Alternatively, you can use

the remote reception

function through the

external telephone.

When Receiving VOICE CALL●

The external telephone

rings. Answer the call.

Select the Receive Mode that Suits Your Needs

26

1 Settings Necessary to Use the Machines Functions

The receive mode determines how the machine responds to incoming faxes and voice calls. Select the mode that

most suits your needs from the chart below. For more information about the receive modes, see “About the

Receive Modes,” on p. 25.

1 Make sure the screen on the left side is

displayed on the display, then press [OK] to

proceed to the “Setup Guide.”

2 Use [▼], [▲] or (Scroll Wheel) to select

<Yes> or <No> for the question on the

screen, the press [OK].

YES

NO Go to “Connect Telephone Cables,” on p. 28.

YES

NO Go to “Connect Telephone Cables,” on p. 28.

To the Next Page

27

1 Settings Necessary to Use the Machines Functions

NO

YES

NO

A screen appears asking you to conrm that the auto

answering function of the telephone with built-in answering

machine or answering machine is activated. After this screen,

go to “Connect Telephone Cables,” on p. 28.

At this mode(<Manual RX>), remote reception function is

available with connecting to the external telephone to the

machine. Go to “Connect Telephone Cables,” on p. 28.

The remote reception function is useful when the receive mode is set to <Manual RX> and your machine is connected to an external

telephone. You can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the default

setting is 25). For details, see “Fax,” in the e-Manual.

Your telephone with built-in answering machine or answering machine must be connected directly to the machine to use <Answer

Mode>. (See “Connect Telephone Cables,” on p. 28.)

The external telephone must be connected to the machine to use <Fax/Tel Auto Switch> or <Manual RX>. (See “Connect Telephone

Cables,” on p. 28.)

Incoming calls or outgoing calls may not work properly, depending on the type of the external telephone connected to the machine.

By default, <Auto RX> is selected in <Reception Mode Selection>. If an external telephone is connected to the machine and receives

a fax or voice call, the external telephone rings. You can answer voice calls while the external telephone is ringing .

To disable the incoming ring, press (Main Menu) to select <Additional Func.> → <Communications Settings> → <Fax Settings> →

<RX Settings> → <Incoming Ring>, then select <O>.

Voice mail is not supported with <Answer Mode>.

DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive ring patterns to a single

telephone line, allowing you to have both a fax number(s) and a telephone number(s), using only one telephone line. Your machine

automatically monitors incoming calls and the ring pattern, to let you know if the call is fax or voice call. Set the ring patterns

assigned by your telephone company for a fax or voice call. Contact your telephone company for information on availability.

–

–

–

–

–

–

–

–

28

1 Settings Necessary to Use the Machines Functions

Connect Telephone Cables

1 Make sure the following screen is displayed on the display, then press [OK] to proceed to the “Setup Guide.”

When <Auto RX> mode The other receive modes

2 Check the socket on the right side of the main unit, then press [OK] to proceed to the “Setup Guide.”

3 Connect the supplied telephone cable to the telephone line jack (A) on the right side of the machine and the

wall jack.

If you want to use your own external telephone or telephone with built-in answering machine, connect the

cable to external device jack (B) on the right side of machine.

When your receive mode is <Auto RX>, only the supplied telephone cable to the telephone line jack (A) is displayed on the screen.

4 Press [OK] to proceed to the “Setup Guide.”

29

1 Settings Necessary to Use the Machines Functions

5 Make sure the following screen is displayed on the display.

By default, the telephone line type on the machine is set to tone dialing. If you use tone dialing, skip the

following procedure.

If you use pulse dialing, follow the procedure below after you nish the “Setup Guide,” and change the

telephone line type setting on the machine to pulse dialing.

If you do not know the type of telephone line you use, contact your local telephone company.

1 Press (Main Menu).

2 Press the right Any key to select <Additional Func.>.

3 Use [▼], [▲] or (Scroll Wheel) to select <Communications Settings>, then press [OK].

4 Use [▼], [▲] or (Scroll Wheel) to select <Fax Settings>, then press [OK].

5 Use [▼], [▲] or (Scroll Wheel) to select <User Settings>, then press [OK].

6 Use [▼], [▲] or (Scroll Wheel) to select <Tel. Line Type Selection>, then press [OK].

7 Use [▼], [▲] or (Scroll Wheel) to select <Manual>, then press [OK].

8 Use [▼], [▲] or (Scroll Wheel) to select telephone line type, then press [OK].

<Tone>: Tone dialing (Default)

<Pulse>: Pulse dialing

9 Press (Main Menu) to return to the Main Menu screen.

–

–

If You Need to Use Pulse Dialing

30

1 Settings Necessary to Use the Machines Functions

Adjust Color with “Auto Gradation Correction”

When using the machine for the rst time, it is necessary to adjust the gradation in order to obtain the optimum

copy or print results.

There are two types of gradation adjustments that can be made: Full Correction and Quick Correction.

Full Correction

This is a precise adjustment. The procedure involves making test prints and placing them on the feeder for

scanning. Once this is complete, the machine automatically corrects the irregularities.

For an accurate adjustment, do not use colored paper, transparencies, or labels. It is recommended that you use plain white paper

when performing Full Correction.

Make sure that you place the test prints properly. Accurate adjustments cannot be made if the test prints are not scanned correctly.

Two sheets of LTR or A4 paper are required for test prints.

Quick Correction

This is a quick and simple adjustment. Adjustment is made internally without outputting any test prints.

It is recommended that you select <Full Correction> when performing an automatic gradation adjustment. Select <Quick Correction>

for a quick, but less complete adjustment between regular full corrections.

●

–

–

–

●

1 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

2 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

31

1 Settings Necessary to Use the Machines Functions

3 Use [▼], [▲] or (Scroll Wheel) to

select<Perform Full Correction> or <Do Not

Perform Full Corr.>, then press [OK].

It is recommended that you select <Perform Full

Correction>.

It takes approximately ve minutes to perform the full

correction.

For the full correction, the machine performs the

correction twice and two test prints are output by the

machine for the each correction.

You selected <Do Not Perform Full Corr.> (=Quick

Correction)

Make sure the following screen is displayed on the display, then press [OK] to

start the quick correction. (It takes approximately two and a half minutes to

perform the quick correction.)

Recalibrations are made internally without outputting any

test prints.

After nishing the quick correction, go to “Set Up

Network Connection,” on p. 33.

–

–

–

●

4 Make sure the following screen is displayed on

the display, then press [OK] to print the rst test

page.

If an error message appears:

If you set <Color> in <Paper Type> of <Paper Settings>, an

error message will appear. If this is the case, follow the

instructions below.

1. Press the right Any key to select <Done> and return to

the screen in step 3.

2. Load LTR or A4 plain paper into the stack bypass tray and

set the paper size and type.

3. Use [▼], [▲] or (Scroll Wheel) to select

<Full Correction>.

5 Place the rst test print on the platen glass.

Place the test print face down on the platen glass, with the

black bands along the top left edge of the platen glass.

Stack approximately 20 sheets of blank paper on top of the

test print for a more precise gradation correction.

32

1 Settings Necessary to Use the Machines Functions

6 Make sure the following screen is displayed on

the display, then press [OK] to perform the

correction.

7 Remove the rst test print from the platen glass.

8 Make sure the following screen is displayed on

the display, then press [OK] to print the second

test page.

If an error message appears:

If you set <Color> in <Paper Type> of <Paper Settings>, an

error message will appear. If this is the case, follow the

instructions below.

1. Press the right Any key to select <Done> and return to

the screen in step 3.

2. Load LTR or A4 plain paper into the stack bypass tray and

set the paper size and type.

3. Use [▼], [▲] or (Scroll Wheel) to select <Full

Correction>.

9 Place the second test print on the platen glass.

Place the test print face down on the platen glass, with the

black bands along the top left edge of the platen glass.

Stack approximately 20 sheets of blank paper on top of the

test print for a more precise gradation correction.

10 Make sure the following screen is displayed

on the display, then press [OK] to perform the

correction.

11 Remove the second print from the platen

glass.

33

1 Settings Necessary to Use the Machines Functions

Set Up Network Connection

To use the machine by connecting to the network, you must set up the IP address.

An IP (Internet Protocol) address is an identication number assigned to each individual computer connected to

the Internet.

To use the following functions, you must set up the IP address in advance.

Remote UI: Access and change the machine settings from a web browser on the computer by using the remote UI software.

E-Mail: Send the scanned documents attached to an e-mail message through a network.

Scan to File Server: Send a scanned document to a le server from the computer.

I-Fax: Send a document to a machine that is compatible with I-fax.

PC Print: Print documents on a computer.

PC Fax: Fax a document on a computer.

Scan with Color Network ScanGear (application on the UFRII LT/FAX User Software CD-ROM:

Save scanned documents to a computer.

The following ow chart indicates the settings needed for each function.

If the machine is connected to an IEEE802.1X network, you also need to congure the IEEE802.1X Settings. (See “Network Settings,” in

the e-Manual.)

12 Make sure the following screen is displayed

on the display.

In the next setting, you will set the network connection. If

you do not set the network connection, select <Set or Check

Later>, then go to “Finish ‘Setup Guide’,” p. 36.

34

1 Settings Necessary to Use the Machines Functions

The “Setup Guide” only supports IPv4.

By default, the IP address is automatically assigned to the

machine by the DHCP server.

1 Make sure the following screen is displayed on

the display. Use [▼], [▲] or (Scroll Wheel) to

select <Set or Check Now> or <Set or Check

Later>.

A: When you use the machine through the network, select

<Set or Check Now> then press [OK].

B: When you do not use the machine through the network,

Select <Set or Check Later>, then press [OK]. (Go to

“Finish ‘Setup Guide’,” on p. 36.)

The setting for IPv6 is not supported with the “Setup Guide.”

When you want to use the machine on the IPv6

environment, select <Set or Check Later> and set it up after

nishing the “Setup Guide.” See “Network Settings,” in the

e-Manual.

–

–

2 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

If the LAN cable is not connected to the machine, a screen

instructing you to connect the LAN cable will appear

before this screen.

If the machine dose not get the IP address 3 minutes after

you connect the LAN cable, check the IP address settings

and the network cable.

3 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

–

–

35

1 Settings Necessary to Use the Machines Functions

4 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

If the machine does not get the IP address, subnet mask and

gateway address, each of the screen displays

“000.000.000.000.”

5 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

See “Network Settings,” in the e-Manual.

6 Make sure the following screen is displayed on

the display.

Go to “Finish ‘Setup Guide’,” on p. 36.

If there are any undened items, a screen appears before

this screen listing the undened items.

36

1 Settings Necessary to Use the Machines Functions

If you need to manually enter a static IP address (even when the machine is set to obtain an IP address

automatically), follow the procedure below. Congure the setting for the IP address manually in the User

Mode after nishing the “Setup Guide.”

In this setting, enter the IP address, subnet mask, and gateway address manually.

Press (Main Menu) → <Additional Func.> → <System Management Set.>* → <Network Settings> →

<Done> → <TCP/IP Settings> → <IPv4 Settings> → <IP Address Settings> → <Manual Settings> → Enter the

IP address → Enter the subnet mask → Enter the gateway address → (Main Menu) to return to the

Main Menu screen. → Turn OFF the main power → Restart the machine.

* If the screen appears prompting you to enter the System Manager ID and System Password, enter the

System Manager ID and System Password using - (numeric keys), then press (Log In/Out). For

details, see “Security,” in the e-Manual.

For more information on this setting, see “Network Settings,” in the e-Manual.

Set IP Address Manually

Finish “Setup Guide”

All the settings with the “Setup Guide” are complete. Follow the procedure below to nish the “Setup Guide.”

After nishing the “Setup Guide,” you need to set up the computer and software for the machine.

1 Make sure the following screen is displayed on

the display, then press [OK] to proceed to the

“Setup Guide.”

Make sure the USB cable is not connected to the machine. If

it is connected already, disconnect it from the machine.

2 Press [OK] to nish the “Setup Guide.”

37

1 Settings Necessary to Use the Machines Functions

When you change the settings on the machine after nishing the “Setup Guide,” refer to the following

items.

Paper Size/Type:

(Main Menu) → <Additional Func.> → <Paper Settings> → Select the drawer → Select the paper size →

Select the paper type → (Main Menu) to return to the Main Menu screen. (See “Introduction of the

Machine,” in the e-Manual.)

Date and Time:

(Main Menu) → <Additional Func.> → <Timer Settings> → <Date & Time Settings> → <Current Time

Settings> → Enter the date and time → (Main Menu) to return to the Main Menu screen. (See

“Introduction of the Machine,” in the e-Manual.)

Daylight Saving Time:

(Main Menu) → <Additional Func.> → <Timer Settings> → <Date & Time Settings> → <Daylight

Saving Time Set.> → Select <On> or <O> → (Main Menu) to return to the Main Menu screen. (See

“Introduction of the Machine,” in the e-Manual.)

Telephone Number Registration:

(Main Menu) → <Additional Func.> → <Communications Settings> → <Fax Settings> → <User

Settings> → <Register Unit Telephone #> → Enter the telephone number, then <Register> → (Main

Menu) to return to the Main Menu screen. (See “Fax,” in the e-Manual.)

Unit Name Registration:

(Main Menu) → <Additional Func.> → <Communications Settings> → <Common Settings> → <TX

Settings> → <Register Unit Name> → Enter the unit name, then <Set> → (Main Menu) to return to

the Main Menu screen. (See “Fax,” in the e-Manual.)

Receive Mode:

(Main Menu) → <Additional Func.> → <Communications Settings> → <Fax Settings> → <RX

Settings> → <Reception Mode Selection> → Select the receive mode → (Main Menu) to return to the

Main Menu screen. (See “Fax,” in the e-Manual.)

Telephone Line Type:

(Main Menu) → <Additional Func.> → <Communications Settings> → <Fax Settings> → <User

Settings> → <Tel. Line Type Selection> → <Manual> → Select the telephone line type → (Main Menu)

to return to the Main Menu screen. (See “Fax,” in the e-Manual.)

Auto Gradation Correction:

(Main Menu) → <Additional Func.> → <Adjustment/Cleaning> → <Auto Gradation Correction> →

Select the correction type → Perform the correction → (Main Menu) to return to the Main Menu

screen. (See “Maintenance,” in the e-Manual.)

Network (Auto):

(Main Menu) → <Additional Func.> → <System Management Set.>* → <Network Settings> →

<Done> → <TCP/IP Settings> → <IPv4 Settings> → <IP Address Settings> → <Obtain Automatically> →

<DHCP> → Enter the IP address → Enter the subnet mask → Enter the gateway address number →

(Main Menu) to return to the Main Menu screen. → Turn OFF the main power → Restart the machine.

(See “Network Settings,” in the e-Manual.)

●

●

●

●

●

●

●

●

●

Change the Settings

38

1 Settings Necessary to Use the Machines Functions

Network (Manual):

(See “Set IP Address Manually,” on p. 36.)

Restart the “Setup Guide”:

<Additional Func.> → <System Management Set.>* → <Start Setup Guide> → <Yes>. (See “Introduction of

the Machine,” in the e-Manual.)

* If the screen appears prompting you to enter the System Manager ID and System Password, enter the

System Manager ID and System Password using - (numeric keys), then press (Log In/Out). For

details, see “Security,” in the e-Manual.

The machine may enter the Standby mode (default setting is 2 minutes) or the Sleep mode (default setting is 15 minutes)

while you are performing setup.

To change the settings, see “Introduction of the Machine” in the e-Manual.

●

●

39

3 Set Up Computers and Software

Types of Connection between Computers and

the Machine

There are two ways to connect the machine and computers: USB connection and network connection.

Network Connection (For details about the set up, see p. 42.)

The following functions are available with Network Connection: PC Print, Remote UI, PC Fax, Scan, E-Mail/I-Fax,

Scan to File Server.

For more information on how to use each function with network connection, refer to the following.

PC Print → “Print,” in the e-Manual

Remote UI → “Settings from a PC,” in the e-Manual

PC Fax → “Fax,” in the e-Manual

Scan → “Scan,” in the e-Manual

E-Mail/I-Fax → “E-mail”/”Fax,” in the e-Manual

Scan to File Server → “Scan,” in the e-Manual

USB Connection (For details about the set up, see p. 52.)

The following functions are available with USB Connection: PC Print, PC Fax.

For more information on how to use each function with USB Connection, refer to the following.

PC Print → “Print,” in the e-Manual

PC Fax → “Fax,” in the e-Manual

You can use the USB connection and network connection together.

40

3 Set Up Computers and Software

System Requirements

Windows 2000

CPU: Intel Pentium/133 MHz or faster

Memory: 128 MB or more

Windows XP

CPU: Intel Pentium/Celeron series

300 MHz or faster

Memory: 128 MB or more

Windows Vista

CPU: Intel Pentium 800 MHz or faster

Memory: 512 MB or more

Windows 7

CPU: 1 GHz (x86 processor, x64 processor) or faster

Memory: 1 GB (x86 processor), 2 GB (x64 processor) or more

Windows Server 2003

CPU: Intel Pentium/Celeron series

133 MHz or faster

Memory: 128 MB or more

Windows Server 2008

CPU: Intel processor/1 GHz (x86 processor),

1.4 GHz (x64 processor) or faster

Memory: 512 MB or more

About User Software CD-ROM

<Drivers>

Details about each drivers installation can be found in the corresponding HTML manuals listed in the Manuals

subsection on p. 41.

UFRII LT Driver

Using the UFRII LT Driver, the various data

processing tasks conventionally executed within

the printer are appropriately divided between

the host computer and the printer to greatly

reduce the overall printing time. The workload

can be delegated to match the output data,

thus realizing a signicant increase in speed

through optimization.

FAX Driver

The FAX Driver is conceptually akin to a printer

driver. A user selects [Print] from any Windows

application software, selects the Canon fax

driver as the printer, and species its

destination(s) and options. The FAX Driver then

converts this into an image that conforms to

standard fax protocols, to be printed or stored

on the recipient fax machine(s).

Color Network ScanGear

Color Network ScanGear enables you to

remotely scan originals from your computer

over the network and transmit the scanned

images to your computer.

PCL Printer Driver (Color imageCLASS

MF9280Cdn Only)

The PCL5c, PCL5e, and PCL6 printer drivers

can be used with most kinds of business

application software. The PCL5c printer driver

is for color printers, the PCL5e printer driver is

for black-and-white printers, and the PCL6

printer driver is for both color and black-and-

white printers. PCL6 is an advanced version of

PCL5c and PCL5e, and oers superior printing

quality and speed. The PCL5e printer driver is

provided as standard with black-and-white

printers.

PS Printer Driver (Color imageCLASS

MF9280Cdn Only)

The PS printer driver converts print data from

applications into data for use with PS printers,

and sends it to the printer. As well as

converting print data, it can also enable you to

congure settings relating to nishing and

detailed settings such as color adjustment,

and provides an appropriate print

environment for desktop publishing and

publishing on demand.

41

3 Set Up Computers and Software

NetSpot Device Installer (NSDI)

The NetSpot Device Installer enables you to set

up the machine for network operations.

To start this program, click [Additional Software

Programs] on the UFRII LT/FAX User Software

CD-ROM Setup screen, then follow the

instructions that appear on the screen. For

details, see the Readme le and online help for

this program.

Canon Font Manager (Color imageCLASS

MF9280Cdn Only)

Font Manager is a comprehensive program

that helps you manage your fonts in Microsoft

Windows.

<Manuals>

Printer Driver Installation Guide

The Printer Driver Installation Guide describes

UFR II printer driver installation, updating

shared printer information, uninstallation,

conguration, and printing.

Canon Products Supported by UFR II Driver

The Canon Products Supported by UFR II Driver

describes compatible Canon products that are

compatible with the UFR II printer driver.

Fax Driver Installation Guide

The Fax Driver Installation Guide describes Fax

driver installation, updating shared printer

information, uninstallation, conguration, and

printing.

Canon Products Supported by Fax Driver

The Canon Products Supported by Fax Driver

describes compatible Canon products that are

compatible with the Fax driver.

Network ScanGear Installation Guide

The Network ScanGear Installation Guide

describes Color Network ScanGear installation,

and uninstallation.

About Other Software Programs (Color

imageCLASS MF9280Cdn Only)

The About Other Software Programs describes

Canon Font Manager installation, and

uninstallation.

Printer Driver Installation Guide (Color

imageCLASS MF9280Cdn Only)

The Printer Driver Installation Guide describes

PCL printer driver installation, updating shared

printer information, uninstallation,

conguration, and printing.

Canon Products Supported by PCL Driver

(Color imageCLASS MF9280Cdn Only)

The Canon Products Supported by PCL Driver

describes compatible Canon products that are

compatible with the PCL printer driver.

Printer Driver Installation Guide (Color

imageCLASS MF9280Cdn Only)

The Printer Driver Installation Guide describes

PS printer driver installation, updating shared

printer information, uninstallation,

conguration, and printing.

Canon Products Supported by PS Driver

(Color imageCLASS MF9280Cdn Only)

The Canon Products Supported by PS Driver

describes compatible Canon products that are

compatible with the PS printer driver.

<Bundled Programs>

Details about each program installation can be found in the corresponding HTML manuals listed in the Manuals

subsection below.

42

3 Set Up Computers and Software

Network Connection

Before Installation

The following procedures are explained using sample screens from Windows XP Professional.

Log on as an Administrator to install the software.

Make sure the machine is turned ON.

(See “Connect Power Cord and Turn on the Machine,” on p. 9.)

Make sure the network cable is connected to the machine.

(See “Connect the LAN Cable,” on p. 8.)

If you want to use the machine as a network scanner, it must be connected to a computer over

an IPv4 network.

Make sure an IP address is assigned to the machine.

(See “Network Settings,” in the e-Manual.)

Click on the circled button on each screen to proceed to the next step.

•

•

•

•

•

•

•

Installation Procedure

1

Connect the machine to the network

correctly, and conrm that the power

is on.

2

Insert the UFRII LT/FAX User Software

CD-ROM.

If you want to install only the PCL

Driver (Color imageCLASS

MF9280Cdn only), proceed to step

37. For more information refer to

the Printer Driver Installation Guide

(located on the PCL/PS User

Software CD-ROM).

If you want to install only the PS

Driver (Color imageCLASS

MF9280Cdn only), proceed to step

37. For more information refer to the

Printer Driver Installation Guide

(located on the PCL/PS User Software

CD-ROM).

–

–

3

If the CD-ROM Setup screen is not

displayed, click [start] on the Windows

task bar → [My Computer].

Windows 2000: double-click [My

Computer] on the Windows desktop.

Windows Vista/7/Server 2003/Server

2008: click [Start] on the Windows task

bar → [Computer] ([My Computer]).

Open the CD-ROM icon, then double-

click [MInst] ([MInst.exe]).

If a language selection screen is

displayed before the CD-ROM Setup

screen, select a language and then

click [Next].

4

Make sure that the boxes next to the

UFR II Printer Driver, FAX Driver, Color

Network ScanGear and Manuals are

checked. Unchecked items will not be

installed.

If you want to install only the UFR II

Driver, select only the UFR II Printer

Driver in this step, then proceed to

the next step. For more information

refer to the Printer Driver

Installation Guide (located on the

UFRII LT/FAX User Software CD-

ROM).

If you want to install only the fax

driver, select only the FAX Driver in

this step, then proceed to step 16.

For more information refer to the

Fax Driver Installation Guide

(located on the UFRII LT/FAX User

Software CD-ROM).

–

–

43

3 Set Up Computers and Software

If you want to install only Color

Network ScanGear, select only

Color Network ScanGear in this

step, then proceed to step 25. For

more information refer to the

Network ScanGear Installation

Guide (located on the UFRII LT/FAX

User Software CD-ROM).

If the amount of free disk space is

insucient to install the software,

an error message is displayed.

Make sure there is sucient disk

space, and then try installing the

software again.

5

6

7

–

–

8

9

If you are using a shared printer in

the Print Server (Point and Print)

environment, it is necessary to install

the Canon Driver Information Assist

Service in the server computer to set

up the printer conguration

automatically or use Department ID

Management.

If the Canon Driver Information

Assist Service is already installed on

your computer, this screen is not

displayed.

If you are using an operating system

equipped with Windows Firewall, the

following message box may appear.

If you want to use Canon Driver

Information Assist Service, click [Yes].

If you select [No], you cannot use

Canon Driver Information Assist

Service.

–

–

–

10

Select the machine (Product Name:

MF9280 or MF9220) using the

information displayed in <Printer

List> → press [Add].

If the machine’s information is not

displayed in <Printer List> on the

screen, click [Search Again]. If this

does not work, see “Unable to nd

the machine during the driver

software installation (Network

Connection)” in “Troubleshooting” in

the e-Manual.

11

12

44

3 Set Up Computers and Software

13

14

15

Installation of the printer driver is

completed and the installation of the

fax driver will begin.

16

17

18

If you are using a shared printer in

the Print Server (Point and Print)

environment, it is necessary to install

the Canon Driver Information Assist

Service in the server computer to set

up the printer conguration

automatically or use Department ID

Management.

If the Canon Driver Information

Assist Service is already installed on

your computer, this screen is not

displayed.

If you are using an operating system

equipped with Windows Firewall, the

following message box may appear.

If you want to use Canon Driver

Information Assist Service, click [Yes].

If you select [No], you cannot use

Canon Driver Information Assist

Service.

–

–

–

19

Select the machine (Product Name:

MF9280 or MF9220) using the

information displayed in <Fax List> →

press [Add].

20

21

22

45

3 Set Up Computers and Software

23

24

Installation of the fax driver is

completed and the installation of

Color Network ScanGear will begin.

25

Select the same language as your

operating system.

26

27

28

29

30

31

The Readme le opens. After reading

through the information provided,

proceed to the next step.

32

Installation of Color Network

ScanGear is completed and the

installation of the manuals will begin.

33

46

3 Set Up Computers and Software

34

The Printer Driver Installation Guide

and the Fax Driver Installation Guide

are installed on your computer and

shortcuts are created on the desktop.

35

36

Remove the UFRII LT/FAX User

Software CD-ROM.

If you are using Color imageCLASS

MF9220Cdn, installation is

complete.

If you want to install the PCL Driver

(Color imageCLASS MF9280Cdn

only) or PS Driver (Color

imageCLASS MF9280Cdn only),

proceed to the next step.

–

–

Before scanning documents from a

computer with Color Network

ScanGear, you need to congure the

settings using ScanGear Tool*. After

making sure that the drivers are

correctly installed proceed to

“Setting the ScanGear Tool,” on p. 50.

* ScanGear Tool is installed together

with the Color Network ScanGear

driver.

37

Insert the PCL/PS User Software CD-

ROM (Color imageCLASS MF9280Cdn

only).

38

If the CD-ROM Setup screen is not

displayed, click [start] on the Windows

task bar → [My Computer].

Windows 2000: double-click [My

Computer] on the Windows desktop.

Windows Vista/7/Server 2003/Server

2008: click [Start] on the Windows task

bar → [Computer] ([My Computer]).

Open the CD-ROM icon, then double-

click [MInst] ([MInst.exe]).

If a language selection screen is

displayed before the CD-ROM Setup

screen, select a language and then

click [Next].

–

39

Select the PCL Printer Driver, PS

Printer Driver and Manuals.

40

41

42

47

3 Set Up Computers and Software

43

44

Select [PCL5e/5c Printer Driver] or

[PCL6 Printer Driver].

45

If you are using a shared printer in

the Print Server (Point and Print)

environment, it is necessary to

install the Canon Driver

Information Assist Service in the

server computer to set up the

printer conguration automatically

or use Department ID

Management.

If the Canon Driver Information

Assist Service is already installed on

your computer, this screen is not

displayed.

–

–

If you are using an operating system

equipped with Windows Firewall, the

following message box may appear.

If you want to use Canon Driver

Information Assist Service, click [Yes].

If you select [No], you cannot use

Canon Driver Information Assist

Service.

46

Select the machine (Product Name:

MF9280) using the information

displayed in <Printer List> → press

[Add].

47

–

48

49

50

51

48

3 Set Up Computers and Software

52

53

54

If you are using a shared printer in

the Print Server (Point and Print)

environment, it is necessary to

install the Canon Driver

Information Assist Service in the

server computer to set up the

printer conguration automatically

or use Department ID Management.

If the Canon Driver Information

Assist Service is already installed on

your computer, this screen is not

displayed.

–

–

If you are using an operating system

equipped with Windows Firewall, the

following message box may appear.

If you want to use Canon Driver

Information Assist Service, click [Yes].

If you select [No], you cannot use

Canon Driver Information Assist

Service.

55

Select the machine (Product Name:

MF9280) using the information

displayed in <Printer List> → press

[Add].

56

–

57

58

59

60

Installation of the printer drivers is

completed and the installation of the

manuals will begin.

49

3 Set Up Computers and Software

61

62

The Printer Driver Installation Guides

are installed on your computer and

shortcuts are created on the desktop.

63

64

Remove the PCL/PS User Software

CD-ROM. Installation is complete.

50

3 Set Up Computers and Software

Check Installation

Verify that the drivers have been installed successfully and that the machine has been set as the default printer.

If the name of your machine is selected on the [Printer] screen from an application, it is set as the default printer.

1 Open the [Printers], [Printers and Faxes], or [Devices and Printers] folder.

Windows 2000: From the Windows task bar, click [Start] → [Settings] → [Control Panel] → double-click [Printers].

Windows XP/Server 2003: From the Windows task bar, click [start] or [Start] → select [Printers and Faxes].

Windows Vista: From the Windows task bar, click [Start] → select [Control Panel] → [Hardware and Sound] → double-click [Printers].

Windows Server 2008: From the Windows task bar, click [Start] → select [Control Panel] → double-click [Printers].

Windows 7/Server 2008 R2: From the Windows task bar, click [Start] → select [Devices and Printers].

Verify that the printer driver icons are displayed.

2 Set your machine as the default printer.

Right-click the printer icon for this machine and then click [Set as Default Printer] or [Set as default printer].

3 Verify that [Color Network ScanGear] appears in the program list.

Windows 2000: From the Windows task bar, click [Start] → [Programs].

Windows XP/Server 2003: From the Windows task bar, click [start] or [Start] → select [All Programs].

Windows Vista/7: From the Windows task bar, click [Start] → select [All Programs].

Verify that the [Color Network ScanGear] is listed in [All Programs] (or [Programs]).

Setting the ScanGear Tool

Before scanning documents from a computer with Color Network ScanGear, you need to select the machine for

scanning using ScanGear Tool. Congure the ScanGear Tool settings as described below.

1 On the [start] (or [Start]) menu, point to [Programs] (or [All Programs]) → [Color Network ScanGear] → click

[ScanGear Tool].

The ScanGear Tool starts.

2 Click [Discover].

The ScanGear Tool searches for scanners on the network, and the results are displayed in the list.

51

3 Set Up Computers and Software

3 Click the scanner to be used (select this machine, in this case) in the list → click [Select].

Information for the selected scanner appears under [Selected Scanner].

Only scanners on the same subnet (network with the same network ID) as your computer are displayed in the list.

After selecting the scanner, you can click [Test Connection] to check that the selected scanner can be used.

You can also specify the machine for scanning by clicking [Address]. For details, see “Scanning Documents from a Networked

Computer” in the e-Manual.

4 Click [Exit].

The ScanGear Tool is closed.

–

–

–

52

3 Set Up Computers and Software

USB Connection

Before Installation

The following procedures are explained using sample screens from Windows XP Professional.

Do not connect the USB cable before installing the software. If you connect the USB cable

before installing the software and the Found New Hardware Wizard screen appears, click

[Cancel].

Log on as Administrator to install the software.

Make sure the machine is turned on before connecting the USB cable.

Click on the circled button on each screen to proceed to the next step.

A USB cable is not included with the machine.

•

•

•

•

•

•

Installation Procedure

1

Insert the UFRII LT/FAX User Software

CD-ROM.

If you want to install only the PCL

Driver (Color imageCLASS

MF9280Cdn only), proceed to step

29. For more information refer to

the Printer Driver Installation Guide

(located on the PCL User Software

CD-ROM).

If you want to install only the PS

Driver (Color imageCLASS

MF9280Cdn only), proceed to step

29. For more information refer to

the Printer Driver Installation Guide

(located on the PS User Software

CD-ROM).

–

–

If you want to install the PCL/PS

driver by connecting the USB cable

(plug and play), it is necessary to

change the settings of the machine.

Press (Main Menu) →

<Additional Func.> → <System

Management Set.>* → <PDL

Selection (PnP)> → <Done> →

<PCL5c>/<PCL6>/<PS3> depending

on the desired driver. After changing

the machine settings, install the

driver using the same procedure as

for the UFR II Printer Driver. (See

steps 6 to 12.)

* If the screen appears prompting you

to enter the System Manager ID and

System Password, enter the System

Manager ID and System Password

using – (numeric keys), then

press (Log In/Out). For details,

see “Security,” in the e-Manual.

–

2

If the CD-ROM Setup screen is not

displayed, click [start] on the Windows

task bar

→

[My Computer].

Windows 2000: double-click [My

Computer] on the Windows desktop.

Windows Vista/7/Server 2003/Server

2008: click [Start] on the Windows task

bar

→

[Computer] ([My Computer]).

Open the CD-ROM icon, then double-

click [MInst] ([MInst.exe]).

If a language selection screen is

displayed before the CD-ROM Setup

screen, select a language and then

click [Next].

53

3 Set Up Computers and Software

3

Make sure that the boxes next to the

UFR II Printer Driver, FAX Driver and

Manuals are checked.

Color Network ScanGear is an

application software that can only

be used in the network. If the

machine is connected using a USB

connection, uncheck the box next

to Color Network ScanGear, as it is

unnecessary.

If you want to install only the UFR II

Driver, select only the UFR II Printer

Driver in this step, then proceed to

the next step. For more information

refer to the Printer Driver

Installation Guide (located on the

UFRII LT/FAX User Software CD-

ROM).

If you want to install only the fax

driver, select only the FAX Driver in

this step, then proceed to step 14.

For more information refer to the

Fax Driver Installation Guide

(located on the UFRII LT/FAX User

Software CD-ROM).

If the amount of free disk space is

insucient to install the software,

an error message is displayed.

Make sure there is sucient disk

space, and then try installing the

software again.

4

–

–

–

–

5

6

7

8

9

10

If the dialog box shown below

appears, press [Retry] to continue the

installation.

11

Remove the attachment (A) that

covers the USB port on the back of

the machine.

54

3 Set Up Computers and Software

Remove the attachment (A) by

pulling the strap.

12

Connect the machine and your

computer with a USB cable (A).

The USB cable is not included.

If the Found New Hardware Wizard

appears, click [Cancel] and

continue the installation.

13

Installation of the printer driver is

completed and the installation of the

fax driver will begin.

14

–

–

15

16

If you are using a shared printer in

the Print Server (Point and Print)

environment, it is necessary to

install the Canon Driver

Information Assist Service in the

server computer to set up the

printer conguration automatically

or use Department ID

Management.

If the Canon Driver Information

Assist Service is already installed on

your computer, this screen is not

displayed.

If you are using an operating

system equipped with Windows

Firewall, the following message box

may appear. If you want to use

Canon Driver Information Assist

Service, click [Yes]. If you select

[No], you cannot use Canon Driver

Information Assist Service.

–

–

–

17

Select [Canon MF9200 Series (FAX)].

18

19

Select the USB port you want to use

from the [Port] drop-down list. If you

want to add a port, click [Add Port]

and then select the USB port that you

want to add.

55

3 Set Up Computers and Software

20

21

22

23

24

Installation of the fax driver is

completed and installation of the

manuals will begin.

25

26

The Printer Driver Installation Guide

and the Fax Driver Installation Guide

are installed on your computer and

shortcuts are created on the desktop.

27

28

Remove the UFRII LT/FAX User

Software CD-ROM.

If you are using Color imageCLASS

MF9220Cdn, installation is

complete.

If you want to install the PCL Driver

(Color imageCLASS MF9280Cdn

only) or PS Driver (Color

imageCLASS MF9280Cdn only),

proceed to the next step.

29

Insert the PCL/PS User Software CD-

ROM (Color imageCLASS MF9280Cdn

only).

–

–

56

3 Set Up Computers and Software

30

If the CD-ROM Setup screen is not

displayed, click [start] on the

Windows task bar → [My Computer].

Windows 2000: double-click [My

Computer] on the Windows desktop.

Windows Vista/7/Server 2003/Server

2008: click [Start] on the Windows

task bar → [Computer] ([My

Computer]).

Open the CD-ROM icon, then double-

click [MInst] ([MInst.exe]).

If a language selection screen is

displayed before the CD-ROM Setup

screen, select a language and then

click [Next].

31

Select the PCL Printer Driver, PS

Printer Driver and Manuals.

32

33

34

35

36

If you are using a shared printer in

the Print Server (Point and Print)

environment, it is necessary to

install the Canon Driver

Information Assist Service in the

server computer to set up the

printer conguration automatically

or use Department ID

Management.

If the Canon Driver Information

Assist Service is already installed on

your computer, this screen is not

displayed.

If you are using an operating

system equipped with Windows

Firewall, the following message box

may appear. If you want to use

Canon Driver Information Assist

Service, click [Yes]. If you select

[No], you cannot use Canon Driver

Information Assist Service.

37

PCL Printer Driver:

Select [Canon MF9200 Series PCL5c]

or [Canon MF9200 Series PCL6].

PS Printer Driver:

Select [Canon MF9200 Series PS3].

–

–

–

57

3 Set Up Computers and Software

38

39

Select the USB port you want to use

from the [Port] drop-down list. If you

want to add a port, click [Add Port]

and then select the printer port that

you want to add.

40

41

42

43

44

45

Repeat steps 34 to 43 to install the PS

Printer Driver.

46

Installation of the printer drivers is

completed and the installation of the

manuals will begin.

47

48

The Printer Driver Installation Guides

are installed on your computer and

shortcuts are created on the desktop.

49

50

Remove the PCL/PS User Software

CD-ROM. Installation is complete.

58

3 Set Up Computers and Software

Check Installation

Verify that the drivers have been installed successfully and that the machine has been set as the default printer.

If the name of your machine is selected on the [Printer] screen from an application, it is set as the default printer.

1 Open the [Printers], [Printers and Faxes], or [Devices and Printers] folder.

Windows 2000: From the Windows task bar, click [Start] → [Settings] → [Control Panel] → double-click [Printers].

Windows XP/Server 2003: From the Windows task bar, click [start] or [Start] → select [Printers and Faxes].

Windows Vista: From the Windows task bar, click [Start] → select [Control Panel] → [Hardware and Sound] → double-click [Printers].

Windows Server 2008: From the Windows task bar, click [Start] → select [Control Panel] → double-click [Printers].

Windows 7/Server 2008 R2: From the Windows task bar, click [Start] → select [Devices and Printers].

Verify that the printer driver icons are displayed.

2 Set your machine as the default printer.

Right-click the printer icon for this machine and then click [Set as Default Printer] or [Set as default printer].

59

4 Appendix

User Manual CD-ROM (e-Manual)

The User Manual CD-ROM (e-Manual) is a software that enables you to select and view the HTML Manuals

included on the CD-ROM via your computer screen. The e-Manual describes all of the functions and

troubleshooting for the machine. Follow the instructions below to use the User Manual CD-ROM (e-Manual).

System Requirements

The User Manual CD-ROM (e-Manual) can be used in the following system environments.

OS (Operating System)

Windows 2000 SP4, Windows XP, Windows Vista, Windows 7

(Internet Explorer 6 is required if you are using Windows 2000 SP4.)

Mac OS X v10.4.x, v10.5.x, v10.6.x

Web Browser

Windows: Internet Explorer 6, 7, 8

Macintosh: Safari 2, 3, 4

Flash Player

Flash Player 8 or later

The memory and CPU required to run each operating system are also required.

A display resolution of 1024 x 768 pixels or higher is required.

The User Manual CD-ROM (e-Manual) may not operate correctly if Flash Player is not installed or a version of Flash Player earlier than

Flash Player 8.0 is installed on your computer

Using the User Manual CD-ROM (e-Manual)

When using the e-Manual with Windows, follow the steps below.

1. Insert the User Manual CD-ROM on your computer.

2. Select the language.

3. Click [Install] or [Display manual].

4. When you click [Install], the e-Manual is installed on your computer and the short cut is created on the desktop.

5. When you click [Display manual], the e-Manual is displayed.

6. To display the e-Manual that you installed on your computer, double-click the short cut icon on the desktop.

When using the e-Manual with Macintosh, follow the steps below.

1. Insert the User Manual CD-ROM on your computer.

2. Drag-and-drop the [MF9200_Manual_us] folder into the location you want to save it.

3. Open the [MF9200_Manual_us] folder.

4. Double-click index.html, and the e-Manual is displayed.

If the menu is not displayed automatically after you insert the CD-ROM, click [start] on the Windows task bar → [My Computer].

(Windows Vista/7: click [Start] on the Windows task bar → [Computer]. Windows 2000: double-click [My Computer] on the Windows

desktop.) Open the User Manual CD-ROM icon, then double-click start.exe.

Depending on the operating system you are using, a security protection message may be displayed. In this case, allow the contents

to be displayed.

●

•

•

●

•

•

●

•

–

–

–

–

–

60

4 Appendix

When you start the e-Manual, the screen shown below is displayed.

If you are using a browser such as Internet Explorer for Windows XP, ActiveX blocks pop-ups in the background. If the e-Manual is not

displayed properly, look for an information bar at the top of the page and click the information bar.

B

F

H

A C D E

G

I

A [Function List]

Click to display the topic pages for function

categories.

B [Top]

Click to return to the top page.

C [Contents]

Click to display the topic pages for Contents.

D [Index]

Click to display the topic pages for Index.

E [Search]

Click to display a list of the topic page titles that

include the phrase you enter. Click a title to

display the corresponding topic page.

F Function Categories

Select a function category to display a list of

image icons for the topics corresponding to that

function. Click an image icon or [Display Function

List] to display the topic pages for the function

category.

G [Print]

Click to print all categories or a single category.

H Appendix Categories

Select an appendix category to display the topic

pages not related to functions, such as the

maintenance and troubleshooting topics.

I [Oce Locations]

Click to display Canon contact details in a

separate window.

When performing a search, make sure to enter a phrase that will match a keyword. Depending on the phrase you enter, the correct

search results may not be displayed.

Topic pages can be printed by page or by category.

The background color and images of the Topic Page may not be printed, depending on the web browser settings.

–

–

–

Contacting Service Center

When you have a problem with your machine and you cannot solve it even after referring to the manuals or

online help, please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at

1-800-OK-CANON between the hours of 8:00 A.M. to 8:00 P.M. EST for U.S.A. and 9:00 A.M. to 8:00 P.M. EST for

Canada Monday through Friday.

Canadian customer support is available on-line at www.canon.ca or by calling 1-800-652-2666 Monday through

Friday from 9:00 A.M. to 8:00 P.M. EST.

Trademarks

Canon, the Canon logo, Color imageCLASS, imageWARE, and NetSpot are trademarks of Canon Inc.

Microsoft, Windows, Windows Server, and Windows Vista are trademarks or registered trademarks of Microsoft

Corporation in the U.S. and/or other countries.

All other product and brand names are registered trademarks, trademarks or service marks of their respective

owners.

Copyright

Copyright © 2010 by Canon Inc. All rights reserved. No part of this publication may be reproduced, transmitted,

transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written

permission of Canon Inc.

UFST: Copyright © 1989-2003 Monotype Imaging, Inc.

Disclaimers

The information in this document is subject to change without notice.

CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED,

EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY,

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON INC. SHALL

NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR

EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

CANON MARKETING JAPAN INC.

16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan

CANON U.S.A., INC.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

CANON EUROPA N.V.

Bovenkerkerweg, 59-61, 1185 XB Amstelveen, The Netherlands

CANON CHINA CO. LTD.

15F Jinbao Building No.89, Jinbao Street, Dongcheng District, Beijing 100005, PRC

CANON SINGAPORE PTE LTD

1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632

CANON AUSTRALIA PTY LTD

1 Thomas Holt Drive, North Ryde, Sydney NSW 2113, Australia

CANON GLOBAL WORLDWIDE SITES

http://www.canon.com/

FT5-3331 (010) © CANON INC. 2010 PRINTED IN CHINA