Canon Ef14Mm Users Manual
Canon-Ef-14Mm-F-2-8L-Ii-Usm-Owner-S-Manual canon-ef-14mm-f-2-8l-ii-usm-owner-s-manual
EF 14mm f/2.8L USM Canon 2045B002 EF 14mm II USM Lens Manual
EF14MM to the manual b3f61853-c7aa-4b82-a5bc-d858d52deb82
2015-01-23
: Canon Canon-Ef14Mm-Users-Manual-240900 canon-ef14mm-users-manual-240900 canon pdf
Open the PDF directly: View PDF 
.
Page Count: 10
| Download | |
| Open PDF In Browser | View PDF |
EF14mm f/2.8L II USM C Y P O ENG Instruction Thank you for purchasing a Canon product. The Canon EF14mm f/2.8L II USM is a highperformance super wide-angle lens designed for EOS cameras. ¡“USM” stands for Ultrasonic Motor. C Features 1. Aspherical and UD lens elements result in outstanding image delineation. 2. Ultrasonic motor (USM) for fast, quiet focusing. 3. Manual focusing is available after the subject comes into focus in autofocus mode (ONE SHOT AF). 4. Close-up photography up to 0.2 m/0.7 ft. 5. A truly round aperture hole results in a nicer background blur. 6. Tight seal structure ensures excellent dustproof and drip-proof performance. Y P O Conventions used in this instruction Warning to prevent lens or camera malfunction or damage. Supplementary notes on using the lens and taking pictures. ENG-1 a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. • Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. This is to prevent the lens from concentrating the sun’s rays, which could cause a fire. Handling Cautions C • If the lens is taken from a cold environment into a warm one, condensation may develop on the lens surface and internal parts. To prevent condensation in this case, first put the lens into an airtight plastic bag before taking it from a cold to warm environment. Then take out the lens after it has warmed gradually. Do the same when taking the lens from a warm environment into a cold one. • Do not leave the lens in excessive heat such as in a car in direct sunlight. High temperatures can cause the lens to malfunction. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult the dealer or an experienced radio/TV technician for help. Y P O This Class B digital apparatus complies with Canadian ICES-003. ENG-2 Nomenclature Distance scale (→ 5, 6) Built-in lens hood Infrared index (→ 6) Depth-of-Field scale (→ 6) C Focusing ring (→ 5) Focus mode switch (→ 5) Y P O Distance index (→ 5) Gelatin filter holder (→ 7) Contacts (→ 4) Lens mount index (→ 4) For detailed information, reference page numbers are provided in parentheses (→ **). ENG-3 1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. ¡After detaching the lens, place the lens with the rear end up to prevent the lens surface and electrical contacts from getting scratched. ¡If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result. The camera and lens may not operate properly. ¡If the contacts get soiled or have fingerprints on them, clean them with a soft cloth. ¡If you remove the lens, cover it with the dust cap. To attach it properly, align the lens mount index and the K index of the dust cap as shown in the diagram, and turn clockwise. To remove it, reverse the order. C See the diagrams below for directions for removing and attaching the lens cap. Y P O The lens mount has a rubber ring for enhanced water- and dust-resistance. The rubber ring may cause slight abrasions around the camera's lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is replaceable by a Canon Service Center at cost. ENG-4 2. Setting the Focus Mode 3. Infinity Compensation Mark Infinity compensation mark Distance index To shoot in autofocus mode, set the focus mode switch to AF. To use only manual focusing, set the focus mode switch to MF, and focus by turning the focusing ring. The focusing ring always works, regardless of the focus mode. C After autofocusing in ONE SHOT AF mode, focus manually by pressing the shutter button halfway and turning the focusing ring. (Full-time manual focus) To compensate for shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance scale. Y P O For accurate manual focusing on subjects at infinity distance, look through the viewfinder while rotating the focusing ring. ENG-5 4. Infrared Index 5. Depth-of-Field Scale The infrared index corrects the focus setting when using monochrome infrared film. Focus on the subject manually, then adjust the distance setting by moving the focusing ring to the corresponding infrared index mark. C Some EOS cameras cannot use infrared film. See the instructions for your EOS camera. ¡The infrared index position is based on a wavelength of 800 nm. ¡Be sure to observe the manufacturer’s instructions when using infrared film. ¡Use a red filter also when you take the picture. The depth of field is the distance in front of and behind the plane of focus on the subject that appears sharp. The depth of field is indicated by the area between the depth-of-field scale lines below the distance scale. The numbers on the scale are F values, and for example, if the shooting distance is 0.5m and the aperture is f/16, the area in focus will extend from about 0.3m to infinity. Y P O The depth-of-field scale is an approximate indicator. ENG-6 6. Filter Holder There is a gelatin filter holder at the rear of the lens. Cut the gelatin filter to fit within the white frames. Then insert the gelatin filter into the filter holder. ¡Only one filter can be used. ¡When you use a gelatin filter, ghosting may appear in the image. C Y P O ENG-7 Specifications Image Size Focal Length/Aperture Lens Construction Minimum Aperture Angle of View Min. Focusing Distance Max. Magnification Field of View Filter Hood Case Max. Diameter and Length Weight 24 × 36 mm 14 mm f/2.8 11 groups, 14 elements f/22 Diagonal: 114° Vertical: 81° Horizontal: 104° 0.2 m / 0.7 ft. 0.15 × 162 × 250 mm / 6.4 × 9.8 inch (at 0.2 m) Insert Built-in LP1016 80 × 94 mm / 3.1 × 3.7 inch 645 g / 22.7 oz C Y P O ¡The lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm when including the lens cap and dust cap. ¡The size and weight listed are for the lens only, except as indicated. ¡The EF1.4X II/EF2X II extender, the EF12 II/EF25 II extension tube, and 250D/500D close-up lenses cannot be used with this lens. ¡Aperture settings are specified on the camera. ¡All data listed is measured according to Canon standards. ¡Product specifications and appearance are subject to change without notice. ENG-8 C CT1-7573-002 Y P O © CANON INC. 2007 2009.7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Xelo PDF Library Modify Date : 2010:04:09 08:59:08+09:00 Create Date : 2010:01:21 13:26:33+09:00 Creator Tool : Xelo PDF Library Metadata Date : 2010:04:09 08:59:08+09:00 Document ID : uuid:2a84a816-2b14-4573-b341-120f06f17657 Instance ID : uuid:6aeb1d44-2b2b-4fee-8b02-abd30a60fc78 Format : application/pdf Page Count : 10 Creator : Xelo PDF LibraryEXIF Metadata provided by EXIF.tools