Canon Eos 1Ds Mark Iii Instruction Manual

Manual EOS-1DsMIII_HG_EN Canon EOS-1Ds Mark III Instruction Manual | Manual Device

Canon-EOS-1Ds-Mark-III Canon-EOS-1Ds-Mark-III

EOS 1Ds Mark III - Instruction Manual EOS1DsMIII_HG_EN Free User Guide for Canon EOS Series Camera, Manual - page2

2015-08-11

: Canon Canon-Eos-1Ds-Mark-Iii-Instruction-Manual-783611 canon-eos-1ds-mark-iii-instruction-manual-783611 canon pdf

Open the PDF directly: View PDF .
Page Count: 212

Download
Open PDF In Browser	View PDF

INSTRUCTION MANUAL

INSTRUCTION
MANUAL

Thank you for purchasing a Canon product.
The EOS-1Ds Mark III is a top-of-the-line, high-performance digital SLR
camera with a large, fine-detail, 21.10-megapixel CMOS sensor
(approx. 36 x 24 mm) and Dual “DIGIC III.” It also features highprecision and high-speed 45-point Area AF (19 cross-type points and
26 Assist AF points) and approx. 5 fps continuous shooting.
The camera is highly responsive to any shooting situation, provides
many features for demanding shoots, highly reliable even in harsh
environments, and compatible with a wide range of accessories.
It also incorporates a Self Cleaning Sensor Unit called the EOS
Integrated Cleaning System to remove dust on the sensor.

Take a Few Test Shots to Familiarize Yourself with the
Camera
With a digital camera, you can immediately view the image you have
captured. While reading this manual, take a few test shots and see how
they come out. You can then better understand the camera.
To avoid botched pictures and accidents, read the Safety Warnings
(p.10,11) and Handling Precautions (p.12,13).

Test the Camera Before Using
After shooting, playback and check the image whether it has been
properly recorded.
If the camera or memory card is faulty and the images cannot be
recorded or downloaded to the personal computer, Canon cannot be
held liable for any loss or inconvenience caused.

Copyrights
Copyright laws in your country may prohibit the use of your recorded
images of people and certain subjects for anything but private
enjoyment. Also be aware that certain public performances, exhibitions,
etc., may prohibit photography even for private enjoyment.

Item Check List
Before starting, check that all the following items have been included
with your camera. If anything is missing, contact your dealer. The
accessories included can also be checked in the System Map (p.194).
Camera: EOS-1Ds Mark III
(includes eyecup, body cap, battery compartment cap, and installed battery for the
date/time clock)
Battery: Battery Pack LP-E4 (with protective cover)

Charger: Battery Charger LC-E4 (with two protective covers)
Power cord
AC Adapter Kit ACK-E4
AC Adapter AC-E4
DC Coupler DR-E4 (with protective cover)
Power cord
3 cables
Interface Cable IFC-200U (1.9 m / 6.2 ft.)
Interface Cable IFC-500U (4.7 m / 15.4 ft.)
Video Cable VC-100
USB cable protector (with attaching screw)
Wide Strap L6
CD-ROMs
EOS DIGITAL Solution Disk (bundled software)
Software Instruction Manual (PDF)
Pocket Guide
Quick start guide to shooting.

EOS-1Ds Mark III Instruction Manual (this booklet)
CD-ROM Guide
Guide to the bundled software and Software Instruction Manual.

Camera Warranty Card
* Be careful not to lose any of the above items.
* The two power cords are identical.
* No memory card (for recording images) is included. Please purchase it
separately.
* To attach the USB cable protector, see page 24 or the Software Instruction
Manual in the CD-ROM.

Conventions Used in this Manual
Icons in this Manual
<6> indicates the Main Dial.
<5> indicates the Quick Control Dial.
<9> indicates the Multi-controller.
<0> indicates the SET button.
9 or 8 indicates that the respective function remains active for 6
sec. or 16 sec. respectively after you let go of the button.
In this manual, the icons and markings indicating the camera’s
buttons, dials, and settings correspond to the icons and markings on
the camera and on the LCD monitor.
The <3> icon indicates a function which can be changed by
pressing the button and changing the setting.
For more information, reference page numbers are provided in
parentheses (p.**).
In this manual, “camera is ready to shoot” (shooting-ready) refers to
the condition where the camera is turned on and no menu or image is
displayed on the LCD monitor. The camera can thereby shoot
immediately.

: Warning to prevent shooting problems.
: Supplemental information.

Basic Assumptions
All operations explained in this manual assume that the power switch
is already set to <1> or . (p.36)
<5> operations explained in this manual assume that the power
switch is already set to .
It is assumed that all the menu settings and Custom Functions are
set to the default.
It is assumed that a memory card (CF card or SD card ) is
being used. In this manual, “CF card” refers to a CompactFlash card,
and “SD card” refers to a SD memory card.
For explanatory purposes, the instructions show the camera attached
with an EF50mm f/1.4 USM lens.

Contents
Introduction
Item Check List ..................................................................................................3
Conventions Used in this Manual.......................................................................4
Index to Features ...............................................................................................8
Handling Precautions .......................................................................................12
Quick Start Guide.............................................................................................14
Nomenclature...................................................................................................16

Getting Started

Recharging the Battery ....................................................................................26
Installing and Removing the Battery ................................................................29
Using a Household Power Outlet .....................................................................31
Installing and Removing the Memory Card ......................................................32
Mounting and Detaching a Lens ......................................................................35
Basic Operation................................................................................................36
Menu Operations..............................................................................................41
Menu Settings ...............................................................................................43
Before You Start...............................................................................................46
Setting the Interface Language .....................................................................46
Setting the Date and Time ............................................................................46
Set the Power-off Time/Auto Power Off ........................................................47
Formatting the Memory Card ........................................................................47
Reverting Camera Settings to the Default ....................................................49

Setting the Image-recording Quality.................................................................52
Selecting the Image Size ..............................................................................52
Setting the JPEG Quality (Compression Rate) .............................................55
Setting the ISO Speed .....................................................................................56
Selecting a Picture Style ..................................................................................57
Customizing the Picture Style ..........................................................................59
Registering the Picture Style............................................................................61
Selecting the White Balance ............................................................................63
Custom White Balance.....................................................................................64
Setting the Color Temperature.........................................................................69
White Balance Correction ................................................................................70
Setting the Color Space ...................................................................................72
Selecting the Media, Folder, and Recording Method .......................................73
Changing the File Name ..................................................................................77
File Numbering Methods ..................................................................................79

Setting the AF and Drive Modes

Exposure Control

Live View Shooting

Selecting the AF Mode .................................................................................... 82
Selecting the AF Point ..................................................................................... 84
When Autofocus Fails...................................................................................... 86
Manual Focusing .......................................................................................... 86
Selecting the Drive Mode ................................................................................ 87
Self-timer Operation ........................................................................................ 88

Metering Modes............................................................................................... 90
Program AE ..................................................................................................... 92
Shutter-Priority AE........................................................................................... 94
Aperture-Priority AE......................................................................................... 96
Depth-of-Field Preview................................................................................. 97
Manual Exposure ............................................................................................ 98
Exposure Compensation ................................................................................. 99
Auto Exposure Bracketing (AEB) .................................................................. 100
AE Lock ......................................................................................................... 101
Bulb Exposures ............................................................................................. 102
Mirror Lockup................................................................................................. 104
Flash Photography ........................................................................................ 105

Live View Shooting ........................................................................................ 110

Image Playback ............................................................................................. 116
Shooting Information Display ......................................................................117
Index Display, Jump Display .......................................................................119
Magnified View ........................................................................................... 120
Rotating an Image ...................................................................................... 121
Viewing the Images on TV ......................................................................... 122
Protecting Images ......................................................................................... 123
Sound Recording........................................................................................... 124
Copying Images ............................................................................................ 125
Erasing Images ............................................................................................. 128
Changing Image Playback Settings............................................................... 129
Setting the LCD Monitor Brightness ........................................................... 129
Setting the Image Review Time ................................................................. 129
Auto Rotate of Vertical Images................................................................... 130

Sensor Cleaning

Direct Printing from the Camera/Digital Print Order Format

Transferring Images to a Personal Computer

Customizing the Camera and Saving Camera Settings

Transferring Images to a Personal Computer ................................................152

Setting Custom Functions ..............................................................................156
Custom Functions .......................................................................................157
Custom Function Settings ..............................................................................158
C.Fn I: Exposure.......................................................................................158
C.Fn II: Image/Flash exposure/Display......................................................163
C.Fn III: Auto focus/Drive............................................................................166
C.Fn IV: Operation/Others ..........................................................................173
Registering and Applying Custom Function Settings .....................................179
Registering My Menu .....................................................................................181
Saving and Loading Camera Settings............................................................182
Registering Basic Camera Settings ...............................................................184

Preparing to Print ...........................................................................................138
Printing ...........................................................................................................140
Trimming the Image ....................................................................................145
Digital Print Order Format (DPOF).................................................................147
Direct Printing with DPOF ..............................................................................150

Automatic Sensor Cleaning............................................................................132
Appending Dust Delete Data..........................................................................133
Manual Sensor Cleaning................................................................................135

Camera Settings & Battery Information..........................................................186
Replacing the Date/Time Battery ...................................................................188
Program Line..................................................................................................189
Troubleshooting Guide...................................................................................190
Error Codes....................................................................................................193
System Map ...................................................................................................194
Specifications .................................................................................................196
Index ..............................................................................................................206

Index to Features
Power
Battery
• Charging
• Calibration
• Battery check
• Battery information
Power outlet
Auto power off

Î p.26
Î p.28
Î p.29
Î p.187
Î p.31
Î p.47

Menus & Basic Settings
Menus
Camera setting display
LCD brightness adjustment
Language
Date/Time
Beeper
Shoot w/o card

Î p.43
Î p.186
Î p.129
Î p.46
Î p.46
Î p.43
Î p.43

Recording Images
Memory card formatting Î p.47
Selecting the memory card Î p.73
Create/select a folder
Î p.75
File name
Î p.77
Recording methods
• Automatic card switching Î p.74
• Separate recording
Î p.74
• Recording identical images Î p.74
File No.
Î p.79
Copying images
Î p.125

Image Quality
Image size
Î p.52
JPEG quality (Compression rate) Î p.55
ISO speed
Î p.56
• ISO speed extension
Î p.158
• ISO speed increments Î p.158

Picture Style
Î p.57
Color space
Î p.72
Custom Functions for image quality
• Noise reduction
for long exposures
Î p.163
• Noise reduction for high ISO Î p.163
• Highlight tone priority
Î p.164
• ISO safety shift
Î p.160

White balance
White balance selection Î p.63
Custom WB
Î p.64
Color temperature setting Î p.69
White balance correction Î p.70
WB bracketing
Î p.71

AF
AF mode
AF point selection
AF Custom Functions
• 19 points/9 points
• AF point expansion
• AI Servo tracking sensitivity
• AI Servo AF
tracking method
• AF Servo operation
• AF fine adjustment
Manual focusing

Î p.82
Î p.84
Î p.170
Î p.170
Î p.166
Î p.167
Î p.166
Î p.169
Î p.86

Metering
Metering mode
Multi-spot metering

Î p.90
Î p.91

Drive
Drive modes
Maximum burst

Î p.87
Î p.53

Index to Features

Mirror lockup
Self-timer

Î p.104
Î p.88

Shooting
Program AE
Shutter-priority AE
• Safety shift
Aperture-priority AE
Manual exposure
Bulb

Î p.92
Î p.94
Î p.160
Î p.96
Î p.98
Î p.102

Î p.99
Î p.100
Î p.101
Î p.158

Î p.105
Î p.106
Î p.106

Live View shooting
Live View shooting
• Grid
• Aspect ratio
• Exposure simulation

Î p.110
Î p.114
Î p.178
Î p.178

Image playback
Image review time
Single image playback
• Shooting information
display
• Highlight alert
• AF point display
Index display

Î p.119
Î p.121
Î p.130
Î p.123
Î p.124
Î p.128
Î p.122

PictBridge
Print Order (DPOF)
Image transfer
• Transfer order

Î p.137
Î p.147
Î p.152
Î p.154

Flash
External flash
External flash control
• Flash settings
• Flash Custom Functions

Camera Direct Printing/DPOF

Exposure adjustment
Exposure compensation
AEB
AE lock
Exposure level increments

Magnified view
Image browsing
(Jump display)
Image Rotate
Auto rotate
of vertical images
Image protect
Sound recording
Image erase
Video OUT

Î p.129
Î p.116
Î p.117
Î p.118
Î p.118
Î p.119

Custom Functions (C.Fn) Î p.155
• Registering settings
Î p.179
My Menu
Î p.181
Saving camera settings Î p.182
Registering basic camera
settings
Î p.184

Sensor cleaning/Dust reduction
Sensor cleaning
• Clean now
• Disable auto cleaning
• Manual cleaning
Add Dust Delete Data

Î p.132
Î p.132
Î p.135
Î p.133

Viewfinder
Dioptric adjustment
Eyepiece shutter
Changing the focusing
screen

Î p.39
Î p.103
Î p.176

Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury, death,
and material damage.

Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
- Do not use any batteries, power sources, and accessories not specified in this
booklet. Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do
not apply heat or apply solder to the battery pack or back-up battery. Do not expose
the battery pack or back-up battery to fire or water. And do not subject the battery
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not
mix new and old or different types of batteries.
- Do not recharge the battery pack outside the allowable ambient temperature range
of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
• Keep the back-up battery away from children. If a child swallows the battery, consult a
physician immediately. (Battery chemicals may harm the stomach and intestines.)
• When disposing of a battery pack or back-up battery, insulate the electrical contacts
with tape to prevent contact with other metallic objects or batteries. This is to prevent
fire or an explosion.
• If excessive heat, smoke, or fumes are emitted during battery pack recharging,
immediately unplug the battery charger from the power outlet to stop the recharging
and prevent a fire.
• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or
fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or
clothing, flush the affected area with lots of clean water without rubbing it. See a
physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an
explosion or fire.

• If you drop the equipment and the casing breaks open to expose the internal parts, do
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens.
Doing so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally
choke the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and
electrical shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below:
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.
Also do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
- Do not use a cord whose insulation has been damaged.
• Occasionally unplug the power plug and use a dry cloth to clean off the dust around
the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet
may become moist and short-circuit the outlet to cause a fire.

Preventing Injury or Equipment Damage
• Do not leave equipment inside a car under the hot sun or near a heat source. The
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause
injury. Also make sure the tripod is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so
may cause battery leakage or a shorter battery life. The battery pack or back-up
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.

If the product does not work properly or requires repair, contact
your dealer or your nearest Canon Service Center.

Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult your nearest
Canon Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Use a blower to blow away dust on the lens, viewfinder, reflex mirror, and
focusing screen. Do not use cleaners that contain organic solvents to clean
the camera body or lens. For stubborn dirt, take the camera to the nearest
Canon Service Center.
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera
misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, memory
card and battery from the camera, and wait until the condensation has
evaporated before using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
If the camera has not been used for an extended period, test all its functions
before using the camera. If you have not used the camera for some time or if
there is an important shoot coming up, have the camera checked by your
Canon dealer or check the camera yourself and make sure it is working
properly.

Handling Precautions

LCD Panel and LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there might be a few dead
pixels among the remaining 0.01% or less pixels. Dead pixels displaying
only black or red, etc., are not a malfunction. They do not affect the images
recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporarily and will disappear when the camera is left unused for a few
days.

Memory Cards
Memory cards are precision devices. Do not drop the memory card or
subject it to vibration. Doing so could damage the images recorded on them.
Do not store or use the memory card near anything having a strong
magnetic field such as a TV set, speakers, or magnet. Also avoid places
prone to having static electricity. Otherwise, the images recorded on the
memory card might be lost.
Do not leave the memory card in direct sunlight or near a heat source. Doing
so can warp the cards and make them unusable.
Do not spill any liquid onto the memory card.
Always store your memory cards in a case to protect the data stored on
them.
Do not bend the card or subject it to any excessive force or physical shock.
Do not store the memory card in hot, dusty, or humid locations.

Lens Electrical Contacts
After detaching the lens from the camera, attach the lens
caps or put down the lens with the rear end up to avoid
scratching the lens surface and electrical contacts.

Cautions for Prolonged Use
When you shoot continuously for a prolonged period or use Live View shooting
for a long period, the camera may become hot. Although this is not a
malfunction, holding the hot camera for a long period can cause slight skin
burns.

Quick Start Guide

Insert the battery. (p.29)

Attach the lens. (p.35)

Set the lens focus mode switch
to . (p.35)

Insert a memory card. (p.32)

Set the power switch to <1>.

Take off the cap and insert a fullycharged battery.

Align the red dot.

The left slot is for the CF card, and the
right slot is for the SD card.

Quick Start Guide

Set the camera to the default
settings. (p.49)
On the menu screen under the [7] tab,
select [Clear all camera settings].
• Press the button and turn
the <6> <5> dial to select it,
then press <0>.
• The Program AE mode will take
effect.

Focus the subject. (p.36)

Take the picture. (p.36)
Press the shutter button completely to
take the picture.

View the image. (p.129)

Aim the Area AF over the subject.
Press the shutter button halfway, and
the camera will focus the subject.

The captured image will be displayed
for about 2 sec. on the LCD monitor.

Shooting will be possible with either a CF card or SD card is in the
camera.
To view the images captured so far, see “Image Playback” (p.116).
To delete an image, see “Erasing Images” (p.128).

Nomenclature
Lens mount index (p.35)

Self-timer lamp (p.88)
Lens lock pin
Shutter button (p.36)
Lens release
button (p.35)

Strap mount
(p.24)

Lens mount
Contacts
(p.13)
Grip

Depth-of-field
preview button
(p.97)
Vertical-grip on/off
switch (p.39)

Tripod socket
Body number

Vertical-grip FE lock/
Multi-spot metering button
(p.39, 105/91)
Vertical-grip Main Dial
(p.39, 37)
Hand strap mount
Vertical-grip shutter button
(p.39, 36)

Body cap (p.35)

LCD panel illumination
button (p.102)
Hot shoe
Flash-sync contacts
Focal plane mark
Metering mode
selection/Flash exposure
compensation button (p.90/105)
Shooting
mode selection button
(p.92)

Exposure compensation/
Aperture button (p.99/98)
FE lock/Multi-spot
metering button (p.105/91)
ISO speed
set button (p.56)
<6> Main Dial (p.37)
Top LCD panel (p.19)
AF start
button (p.82/83)

AF mode
selection/Drive mode
selection button
(p.82, 87)

AE lock/
Reduce button
(p.101/120, 145)

AEB set button
(p.100)

AF
point selection/
Magnify button
(p.84/112,
120, 145)

Strap mount
(p.24)

Eyepiece
shutter lever
(p.103)
<9> Multicontroller (p.38)
<5> Quick
Control Dial (p.38)

Dioptric
adjustment
knob (p.39)

Verticalgrip AE lock/
Reduce button
(p.39, 101/120, 145)

Viewfinder
eyepiece

Verticalgrip AF point
selection/Magnify
button (p.39, 84/
112, 120,145)

Battery release
handle (p.29, 30)
Battery (p.26)
Power/Quick Control
Dial switch (p.36)
<0> Setting button (p.41)

Verticalgrip AF start button
(p.39, 82, 83)

Info/Trimming
orientation button
(p.114, 116, 186/145)

LCD Monitor (p.41, 129)
Eyecup (p.39)

Menu
button (p.41)

SD card slot
(p.32)

WFT-E2/E2A
mounting hole

Memory card
slot cover
(p.32)

Extension
system
terminal

CF card
slot (p.32)

CF card eject
button (p.33)
Access lamp (p.34)
Memory card slot cover
release handle (p.32)
Playback button
(p.116)
Erase button (p.128)
Rear LCD Panel (p.20)

Recording microphone (p.124)
Protect/Sound recording button
(p.123/124)/
Picture Style setting button (p.57)
Function button (p.52, 63, 69, 73)

PC terminal (p.108)
Remote control terminal (N3 type) (p.103)
VIDEO OUT terminal (p.122)
DIGITAL terminal (p.138, 152)

Battery compartment
cap (p.29)

Top LCD Panel
Shutter speed
Bulb (buLb)
Bulb exposure time (min.:sec.)
FE lock (FEL)
Busy (buSY)
Error (Err)
Sensor cleaning (CLn)
ISO speed
Highlight tone priority display
Dust Delete Data acquisition (- - - -)
Shooting mode
d : Program AE
f : Aperture-priority AE
a : Manual exposure
s : Shutter-priority AE

Aperture
AEB amount
Dust Delete Data acquisition (- -)
AF point selection mode
( [ -- -- ] AF, SEL [ ], SEL AF)
Recording media indicator (Card *)
AF point registration
( [ -- -- ] HP, SEL [ ], SEL HP)
Shots remaining
Self-timer countdown
Bulb exposure time (Hours)
Recording media full (Full)
Error code
Remaining images to record
AF mode
X:
One-Shot AF
Z:
AI Servo AF

ISO speed
Metering mode
q Evaluative
metering
w Partial metering
r Spot metering
e Center-weighted
average metering

Exposure level
scale

Flash exposure
compensation
AEB
Mirror lockup

Drive modes
u Single shooting
o High-speed
continuous shooting
p Low-speed
continuous shooting
k Self-timer (10 sec.)
l Self-timer (2 sec.)
6
Silent single shooting
Exposure level indicator
Exposure compensation amount
AEB range
Flash exposure compensation amount

The display will show only the settings currently applicable.

Rear LCD Panel
External media selection
icon*3

External media connection icon*3

SD card indicator

White balance correction
White balance
Q Auto
W Daylight
E Shade
R Cloudy
Y Tungsten light
U White fluorescent light
I Flash
O Custom
P Color temperature

SD card
selection icon
CF card
indicator
CF card
selection
icon

Image size
3
Large
4 Medium1
5 Medium2
6 Small
1 RAW
9 Small RAW

Custom white balance
acquisition display ([ * ])
File No.
Color temperature
Custom white balance
number
Personal white balance
number

Monochrome shooting
Wired LAN connection*1
Wireless LAN connection*1

Folder number
Recording media indicator
(Full, Err)
Data transfer icon*2

*1 :Displayed when Wireless File Transmitter WFT-E2/E2A is used.
*2 :Displayed when the camera is connected to a personal computer.
*3 :Displayed when the WFT-E2/E2A and external media are used.
The display will show only the settings currently applicable.

Viewfinder Information
Center spot metering circle

Area AF ellipse

Focusing screen

AF point
: Cross-type points
: Assist AF points

Exposure
level indicator
Max. burst

JPEG icon
<1>
RAW icon

Manual exposure
AE lock
AEB in-progress
Multi-spot metering
Flash-ready
Improper FE lock warning
High-speed sync
(FP flash)
FE lock
FEB in-progress
AF point selection mode
( [ -- -- ] AF, SEL [ ], SEL AF)
Recording media indicator (Card *)
AF point registration
( [ -- -- ] HP, SEL [ ], SEL HP)

Focus confirmation light
ISO speed
Highlight tone priority display
ISO speed icon
Shots remaining
Recording media full (Full)
Standard exposure index
Exposure level scale
: 1 stop
: 1/3 stop
Overexposure
Flash
overexposure
Exposure level

Shutter speeds
Bulb (buLb)
FE lock
Busy (buSY)

Flash exposure
level
Aperture

Exposure compensation
Flash exposure compensation
White balance correction

Flash underexposure
Underexposure

The display will show only the settings currently applicable.

Battery Pack LP-E4
Lock lever

Battery release handle

Protective cover

Battery Charger LC-E4
Charger for Battery Pack LP-E4. (p.26)
Charge level/Calibration (Discharge) status indicator/
Performance check lamp

Charge lamp
Calibration/Performance
check button

Battery pack slot

Car battery cable socket
Power cord socket

Protective
covers (2)

AC Adapter Kit ACK-E4
Powers the camera from a household power outlet. (p.31)
Power cord
Power cord socket

Protective cover
DC coupler

AC adapter
DC terminal
DC plug

Attaching the Neck Strap and Hand Strap
Using the USB Cable Protector
Strap

USB cable protector

Terminal cap
Interface cable
Extension system terminal

Hand strap (sold separately)

Attach the strap

After attaching the strap, pull it at the buckle to take up the slack and to
make sure it does not loosen.
Attach the extension system terminal cap securely, making sure it is not
loose. Be careful not to lose it.

Getting Started
This chapter explains preliminary steps and basic
camera operations.

Recharging the Battery

Connect the charger to a power outlet.
Connect the power plug to a power outlet,
and connect the power cord to the charger.
When no battery is attached, all the
indicator lamps will be off.

the protective covers
2 Remove
from the charger and battery.
Remove the protective cover on the
charger by sliding it out.

the battery.
3 Recharge
Slide in the battery into the charger’s
slot as shown by the arrow, and make
sure it is securely attached. You can
attach the battery to slot A or B.
X The Charge level indicator will light in
green and charging will start.
X When the battery is fully charged, all three Charge
level indicators will light (50%/80%/100%).
It takes about 2 hours to fully recharge a
completely exhausted battery. The time
required to recharge the battery depends on the
ambient temperature and battery’s charge level.
The charger cannot charge any battery other than Battery Pack LP-E4.
Battery Pack LP-E4 is dedicated to Canon only. Using it with a non-Canon battery charger
or product may result in malfunction or accidents for which Canon cannot be held liable.
For battery calibration (p.28), it is best to do it after the battery is nearly exhausted.
If you do the calibration with a fully charged battery, it will take about 12 hours to
complete the calibration (power discharge) and the battery recharging (approx. 10
hours to discharge, and approx. 2 hours to fully recharge).
When two battery packs are attached to the charger, the battery attached first will be charged first,
then the other battery will be charged. Although one battery can be recharged and another
calibrated (p.28) at the same time, two batteries cannot be recharged or calibrated at the same time.

Recharging the Battery

Tips for Using the Battery and Charger
Recharge the battery on the day before or on the day it is to be
used.
Even during non-use or storage, a charged battery will gradually
discharge and lose its power.
After recharging the battery, detach it and unplug the power
cord from the power outlet.
When not using the battery and charger, attach the protective covers.
Use the battery in an ambient temperature range of 0°C - 45°C /
32°F - 113°F.
To attain best battery performance, an ambient temperature of 10°C
- 30°C / 50°F - 86°F is recommended. In cold locations such as
snowy areas, battery performance and operation time may
temporarily decrease.
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small
amount of power current is released, resulting in excess discharge
and shorter battery life. Take out the battery from the camera and
attach the protective cover before storing. Storing the battery after it
is fully charged can lower the battery’s performance.
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/60 Hz
power source. If necessary, attach a commercially-available plug adapter
for the respective country. Do not attach any portable voltage transformer
to the battery charger. Doing so can damage the battery charger.
Check the battery performance.
While the battery is recharging, press the
button to check the
battery’s performance level indicated by the
Charge level indicator.
(Green): Battery performance is fine.
(Green): Battery performance is slightly degraded.
(Red): Purchasing a new battery is recommended.

Recharging the Battery

The lamp blinks in red.
This indicates that you should calibrate the battery so that the correct battery level is detected
and the camera’s battery level indicator can display the correct battery level. Calibration is not a
required operation. If you want to just recharge the battery, you can let the battery start
recharging automatically after about 10 sec. If you want to do the calibration, press the
button while the lamp is blinking in red. The Charge
level indicator will blink in red and the calibration (power discharge) will start.
After the calibration is completed, the battery will start recharging automatically. Note that
the less depleted the battery, the longer the calibration will take. The <2h>, <4h>, and
<10h> figures on the side of the Charge level indicator respectively indicate the
approximate number of hours it will take to complete the calibration (power discharge). If
the <10h> indicator blinks in red, it will take approx. 10 hours. After the calibration is
completed and the battery is totally drained, it will take a further 2 hours to recharge the
battery fully. If you want to stop the calibration before it is completed and start recharging
the battery, remove the battery from the charger and attach it to the charger again.

All three Charge level indicators blink.
If all three Charge level indicators blink in green, it means that the battery’s internal temperature
is not within 0°C - 40°C / 32°F - 104°F. The battery will start recharging when the internal
temperature is within 0°C - 40°C / 32°F - 104°F.
If all the Calibration (discharge) status indicators blink in red or if all the lamps blink between
green and red (including the lamp), remove the battery from the charger
and take it to your dealer or to nearest Canon Service Center.
Also, if a battery other than the LP-E4 is attached to the charger, the lamps will blink between
red and green (including the lamp) and the battery cannot be recharged.

Use the car’s cigarette lighter socket to recharge the battery.
With Car Battery Cable CB-570 (sold separately), you can connect the charger’s
car battery cable socket ( terminal) to your car’s cigarette lighter socket.
• When recharging the battery this way, be sure that the car’s engine is on.
If the car engine is off, disconnect the car battery cable from the cigarette
lighter socket. If you leave the car battery cable connected to the
cigarette lighter socket, it may drain the car battery.
• Do not use a transformer with the battery charger.
• Battery charging from a car battery is possible only with a 12 V DC or
24 V DC car battery in a minus-grounded car. The shape or dimensions
of the cigarette lighter socket in certain cars might not be compatible with
the car battery cable.

Installing and Removing the Battery
Installing the Battery
Load a fully charged LP-E4 battery pack into the camera.

Remove the battery compartment
cap.
Grasp both sides of the cap and pull it
out.

the battery.
2 Insert
Insert the battery firmly all the way,
and turn the release handle as shown
by the arrow.

Checking the Battery Level
When the power switch is set to <1> (p.36), the battery level will be
indicated in one of six levels:
Icon Level (%)

100 - 70 Sufficient battery level

69 - 50 Battery level exceeds 50%

49 - 20 Battery level below 50%

19 - 10 Battery level is low

Battery will be exhausted soon
Recharge the battery

Select the [6 Battery info.] menu to see the detailed battery information.
(p.187)

Installing and Removing the Battery

Battery Life
Temperature

At 23°C / 73°F

At 0°C / 32°F

The figures above are based on a fully-charged LP-E4, no Live View shooting,
and CIPA (Camera & Imaging Products Association) testing standards.
The actual number of shots may be fewer than indicated above
depending on the shooting conditions.
Pressing the shutter button halfway for long periods or operating only the
autofocus can also reduce the number of possible shots.
The number of possible shots will decrease with more frequent use of
the LCD monitor.
For battery life when Live View shooting is used, see page 114.

Removing the Battery

Flip out the battery release
handle and turn it as shown by
the arrow.

the battery.
2 PullToout
prevent shorting, be sure to attach
the protective cover (p.22) to the
battery.
When not using the camera, attach
the battery compartment cap.

If the battery’s rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
Rubber lining

Using a Household Power Outlet
With AC Adapter Kit ACK-E4, you can connect the camera to a
household power outlet and not worry about the battery level.

Connect the DC plug.
Connect the DC Coupler’s plug to the
AC adapter’s DC terminal.

the power cord.
2 Connect
Connect the power plug to the power
outlet, then connect the power cord to
the AC adapter.

the DC Coupler.
3 Insert
Insert the coupler firmly all the way,
and turn the release handle as shown
by the arrow.
Set the camera’s power switch to
<1>.
After using the camera, unplug the
power plug from the power outlet.

The DC Coupler is not water-resistant, so do not get it wet when using it
outdoors.
Do not connect or disconnect the power cord or DC Coupler while the
camera’s power switch is set to <1>.

Installing and Removing the Memory Card
The camera can use a CF card and SD card. Images can be recorded
with at least one memory card installed in the camera.
If both card slots have a card, you can select which card to record
images with or record the same images simultaneously on both cards.
(p.73)
If you use an SD card, be sure the write protect switch is set
upward to enable writing/erasing.

Installing a Card

Open the cover.
Flip out and turn the cover release
handle as shown by the arrow.

the memory card.
2 Insert
The left slot is for the CF card, and
the right slot is for the SD card.
With the CF card, face the label
side toward you as shown in the
illustration and insert the end with
the small holes into the camera.
If the CF card is inserted in the
wrong way, it may damage the
camera.
X The CF card eject button will stick out.
With the SD card’s label facing you,
push in the card until it clicks in place.

the cover.
3 Close
Press the cover until it snaps shut.

The camera can also use SDHC memory cards.
Ultra DMA (UDMA) CF cards enable faster data writing.

Installing and Removing the Memory Card

the power switch to <1>.
4 Set
X The number of possible shots will be
displayed on the top LCD panel and
in the viewfinder.
X The rear LCD panel will indicate
which memory card(s) has been
installed. The images will be
recorded to the memory card with
the < > arrow next to the
respective card’s indicator.

Memory card selection icon
CF card indicator
SD card indicator

The camera is compatible with both Type I and Type II CF cards which
differ in thickness. High-capacity (2GB or higher) CF cards, SD cards,
and hard disk-type cards can also be used.
The number of possible shots varies depending on the memory card’s
capacity, image-recording quality, ISO speed, etc.
The [2 Shoot w/o card] menu option set to [Off] will prevent you from
forgetting to install a memory card.

Removing the Card

Open the cover.
Set the power switch to <2>.
Make sure the access lamp is off,
then open the cover.

out the memory card.
2 TakeTo remove
the CF card, push the
eject button.
To remove the SD card, push it in and
release it.
Close the cover.

Installing and Removing the Memory Card

The access lamp lights during any of the following operations: The
image is being exposed, being written to or read by the memory card,
being erased, or data is being transferred. While the access lamp is
lit, never do any of the following. Doing so may damage the image
data. It may also damage the memory card or camera.
• Opening the card slot cover.
• Removing the battery.
• Shaking or banging the camera around.
If the memory card already contains recorded images, the image number
might not start from 0001. (p.79)
Compared to other memory cards, hard disk-type cards are more
vulnerable to vibration and physical shock. If you use a such a card, be
careful not to subject the camera to vibration or physical shock especially
while recording or playing images.
When holding a hard disk-type card, always hold its sides. You may
damage the card by holding its flat surfaces.
Do not touch the SD card’s contacts with your fingers or metal objects.
Even with the power switch set to <2>, when you insert or remove a
memory card, the access lamp might blink.
If a memory card-related error is displayed, see page 48.

Mounting and Detaching a Lens
Mounting a Lens

Remove the caps.
Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.

the lens.
2 Attach
Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.

the lens, set the focus mode
3 On
switch to .
If it is set to , autofocus will not
be possible.

4 Remove the front lens cap.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
Turn the lens until it stops, then
detach it.

When attaching or detaching the lens, take care to prevent dust from
entering the camera through the lens mount.
Not compatible with EF-S lenses.

Basic Operation
Power/Quick Control Dial Switch
<2> : The camera is turned off and
does not operate. Position for
when you do not use the
camera.
<1> : The camera operates.

: The camera and <5> dial
operate. (p.38)
Whenever you set the power switch to <1/J> or <2>, the sensor cleaning will be
executed automatically. During the sensor cleaning, the LCD monitor will display .
To save battery power, the camera turns off automatically after about 1 minute of
non-operation. To turn on the camera again, just press the shutter button.
You can change the auto power-off time with the menu’s [5 Auto
power off] setting. (p.47)
If you set the power switch to <2> while the image is being recorded
to the memory card, [Recording ...] will be displayed and the power will
turn off after the card finishes recording the image.

Shutter Button
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.

Pressing halfway (9)
This activates autofocusing and automatic
exposure that sets the shutter speed and
aperture.
The exposure setting will be displayed on
the top LCD panel and in the viewfinder.
Pressing the
button will
result in the same operation as
pressing the shutter button halfway.

Basic Operation

Pressing completely
This releases the shutter and takes the
picture.

If you press the shutter button completely without pressing it halfway first
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during the menu display, image playback, and image recording,
you can instantly go back to shooting-ready by pressing the shutter
button halfway.

<6> Using the Main Dial for Selecting
(1) After pressing a button, turn the
<6> dial.
When you press a button, its function remains
selected for 6 seconds (9). During this
time, you can turn the <6> dial to set the
desired setting. When the function turns off or
if you press the shutter button halfway, the
camera will be ready to shoot.
Use the dial to select or set the
shooting mode, AF mode, metering
mode, AF point, ISO speed, exposure
compensation when the button
is pressed, or memory card.

(2) Turn the <6> dial only.
While looking at the viewfinder or top
LCD panel, turn the <6> dial to set the
desired setting.
In this way, you can set the shutter
speed, aperture, etc.

Basic Operation

<5> Using the Quick Control Dial for Selecting
Before using the <5> dial, set the power switch to .

(1) After pressing a button, turn the
<5> dial.
When you press a button, its function
remains selected for 6 seconds (9).
During this time, you can turn the <5> dial
to set the desired setting. When the function
turns off or if you press the shutter button
halfway, the camera will be ready to shoot.
Use the dial to select or set the
shooting mode, drive mode, flash
exposure compensation, AF point, ISO
speed, exposure compensation when
the button is pressed, white
balance, or image recording size.

(2) Turn the <5> dial only.
While looking at the viewfinder or top
LCD panel, turn the <5> dial to set the
desired setting.
Use this dial to set the exposure
compensation amount and the
aperture setting for manual exposures.
You can also do step (1) when the power switch is set to <1>.

<9> Operating the Multi-controller
The <9> consists of eight direction
keys and a button at the center.
Use it to select the center AF point,
correct white balance, select focusing
frame during Live View shooting, or
scroll the image during magnified view.

Basic Operation

Vertical Shooting
The bottom of the camera provides a shutter button, <6> Main Dial,
AF point selection button, AE Lock button,
AF
Start button, and FE lock/Multi-spot metering button all for
vertical shooting.
Before using the vertical shooting
controls, set the vertical operation on/
off switch to <1>.
When not using the vertical shooting
controls, set the switch to <2> to
prevent accidental operation.

Adjusting the Viewfinder Clarity

Remove the eyecup.
While grasping both sides of the
eyecup, slide it upward to remove.

the dioptric adjustment
2 Turn
knob.
Turn the knob to the right or left until
the AF points or the center spot
metering circle looks sharp in the
viewfinder.
Attach the eyecup.

If the camera’s dioptric adjustment still cannot provide a sharp viewfinder
image, using Dioptric Adjustment Lens Eg (sold separately) is
recommended.

Basic Operation

Holding the Camera
To obtain sharp images, hold the camera still to minimize camera
shake.

Horizontal shooting

Vertical shooting

1. Wrap your right hand around the camera grip firmly.
2. Hold the lens bottom with your left hand.
3. Press the shutter button lightly with your right hand’s index finger.
4. Press your arms and elbows lightly against the front of your body.
5. Press the camera against your face and look through the viewfinder.
6. To maintain a stable stance, place one foot in front of the other.

Menu Operations
By setting various optional settings with the menus, you can set the
Picture Style, date/time, Custom Functions, etc. While looking at the
LCD monitor, you use the button on the camera back and the
<6> <5> dials.
button

<5> Quick
Control Dial
<0> button
4 Playback 2
3 Playback 1
2 Shooting 2
1 Shooting 1

5 Set-up 1
6 Set-up 2
7 Set-up 3
8 Custom Functions
9 My Menu

Playback menus Image playback-related items

Yellow Set-up menus

Description
Shooting-related items
Camera’s function settings

Orange Camera’s Custom Functions

Register frequently-used menu items and Custom Functions

Menu Operations

Menu Setting Procedure

Display the menu.
Press the button to display
the menu.

a tab.
2 Select
Turn the <6> dial to select a tab.

a menu item.
3 Select
Turn the <5> dial to select the menu
item, then press <0>.

the setting.
4 Select
Turn the <5> dial to select the
desired setting.

the desired setting.
5 SetPress
<0> to set it.
the menu.
6 ExitPress
the button to exit the
menu and return to camera shooting.
You can also use <9> to select the tab and menu item. (Works only with
the menu’s top layer items.)

Menu Operations

Menu Settings
1 Shooting 1 (Red)

Q / W / E / R / Y / U / I / O (1 - 5) /
P (2500 - 10000) / PC-1 - 5

Custom WB regist.

Manual registration of white balance data

WB correction: B/A/M/G bias, 9 levels each
WB-BKT: B/A and M/G bias, single-level
increments, ±3 levels

sRGB / Adobe RGB

Standard / Portrait / Landscape / Neutral /
Faithful / Monochrome / User Def. 1, 2, 3

2 Shooting 2 (Red)
JPEG quality

Compression rate for 3, 4, 5, 6

3 / 4 / 5 / 6 / 1 / 1+3 / 1+4 /
1+5 / 1+6 / 9 / 9+3 / 9+4 /
9+5 / 9+6
(→p.45 )

Off / 2 sec. / 4 sec. / 8 sec. / Hold

Dust Delete Data

Obtain dust-mapping data to eliminate dust
spots with bundled software

Erase-protect image

Rotate vertical image

Specifies images to be printed (DPOF)

Select images to be transferred to a personal
computer

Copy images between memory cards

3 Playback 1 (Blue)

Displayed when external media is used via
External media backup
WFT-E2/E2A (sold separately)

Menu Operations

4 Playback 2 (Blue)

Highlight alert

Disabled / Enabled

Disabled / Enabled

Brightness / RGB

Enlarge display

Enlarge from image center / Enlarge from
selected AF point

1 image / 10 images / 100 images / Screen /
Date / Folder

1min. / 2 min. / 4 min. / 8 min. / 15 min. /
30 min. / Off

[Record func.] Standard / Auto switch media /
Rec. separately / Rec. to multiple
[Record/play] f / g / u
[Folder] Creating and selecting a folder

Record func+media/
folder sel.
File numbering

Continuous / Auto reset / Manual reset

File name setting

File name (unique setting) / User setting 1 /
User setting 2

On zD / On D / Off

Initialize and erase data in the card

Seven brightness levels provided

Set the date (year, month, day) and time (hour,
min., sec.)

18 languages provided (English, German,
French, Dutch, Danish, Portuguese, Finnish,
Italian, Norwegian, Swedish, Spanish, Greek,
Russian, Polish, Simplified Chinese,
Traditional Chinese, Korean, and Japanese)

Detailed battery information

Live View function
settings

[Live View shoot.] Disable / Enable
[Grid display] Off / On

External Speedlite
control

Flash function settings / Flash C.Fn settings /
Clear all Speedlite C.Fn’s

5 Set-up 1 (Yellow)

6 Set-up 2 (Yellow)

Menu Operations

7 Set-up 3 (Yellow)

Save/load settings on
media

Regist/apply basic
settings

Register / Apply

Clear all camera settings Resets the camera to the default settings

Sensor cleaning

Auto cleaning / Clean now / Clean manually

For updating the firmware

Displayed when WFT-E2/E2A (sold separately)
is attached

8 Custom Functions (Orange)
C.Fn I: Exposure

C.Fn II:
Image/Flash exp/Disp

C.Fn III:
Auto focus/Drive

Customize the camera as desired

C.Fn IV:
Operation/Others

Clear all Custom Func.
Clears all Custom Function settings
(C.Fn)

C.Fn setting register/
apply

Custom Function settings are registered in and
applied to the camera

Register frequently-used menu items and
Custom Functions

9 My Menu (Green)
My Menu settings

What is displayed by [2 Image size] depends on the [Record func.]
setting under [5 Record func+media/folder sel.]. If [Record func.] is
set to [Rec. separately], select the image size for the respective memory
card. (1+ JPEG and 9+JPEG cannot be displayed.)
Even while the menu is displayed, you can instantly go back to shooting
by pressing the shutter button halfway.
The explanation of menu functions hereinafter assumes that you have
pressed the button to display the menu screen.
You can register frequently-used menu items under My Menu <9>.
(p.181)

Before You Start
3 Setting the Interface Language

Select [Language].
Under the [6] tab, select
[Language] (the third item from the
top), then press <0>.

the desired language.
2 SetTurn
the <5> dial to select the
language, then press <0>.
X The language will change.

3 Setting the Date and Time
Check if the camera’s date and time are set correctly. If necessary, set
the correct date and time.

Select [Date/Time].
Under the [6] tab, select [Date/
Time], then press <0>.

the date, time and date display format.
2 SetTurn
the <5> dial to select the number.
Press <0> so
is displayed.
Turn the <5> dial to select the
desired setting, then press <0>.
(Returns to
.)

3 ExitTurnthethemenu.
<5> dial to select [OK],
then press <0>.
X The date/time will be set and the
menu will reappear.
It is important to set the correct date/time because it will be recorded
together with each captured image.

Before You Start

3 Set the Power-off Time/Auto Power Off
To save battery power, the camera turns off automatically after a certain
time of non-operation.
You can change this auto power-off time.
If you do not want the camera to turn off automatically, set this to [Off].
After the power turns off, you can turn on the camera again by pressing
the shutter button or other button.

Select [Auto power off].
Under the [5] tab, select [Auto
power off], then press <0>.

the desired time.
2 SetTurn
the <5> dial to select the item,
then press <0>.
Even if [Off] has been set, the LCD monitor will turn off automatically after 30 min.
to save power. Also, during Live View shooting, the Live View screen will turn off
automatically after 30 min. (The camera’s power will not turn off.)

3 Formatting the Memory Card
If the memory card is new or was previously formatted by another
camera or personal computer, format the card with the camera.
When the memory card is formatted, all images and data in the
card will be erased. Even protected images will be erased, so
make sure there is nothing you need to keep. If necessary,
transfer the images to a personal computer, etc., before
formatting the card.

Select [Format].
Under the [5] tab, select [Format],
then press <0>.

Before You Start

the memory card.
2 Select
[f] is the CF card, and [g] is the SD
card.
Turn the <5> dial to select the card,
then press <0>.

[OK].
3 Select
When [g] is selected, low-level
formatting is possible. (p.49)
Turn the <5> dial to select [OK],
then press <0>.
X The memory card will be formatted.
X When the formatting is completed,
the menu will reappear.

When the memory card is formatted or erased, only the file management
information is changed. The actual data is not completely erased. Be
aware of this when selling or discarding the card.
When discarding the memory card, destroy the card physically to prevent
personal data from being leaked.
If a memory card-related error message is displayed on the LCD monitor,
remove and reinstall the card. If the error persists, use a different card.
If you can transfer all the images in the card to a personal computer,
transfer all the images and then format the card. The card may then
return to normal.
The memory card capacity displayed on the card format screen might be
smaller than the capacity indicated on the card.

Before You Start

About Low-level Formatting
When [g] SD card is selected, low-level formatting is possible. If the
writing speed to the SD card is slower than usual or if you want to
completely erase the data in the SD card, checkmark [Low level
format] and format the card.

Press the button.
In step 3 on the preceding page,
press the button.
X The [Low level format] option will be
checkmarked .
With displayed, select [OK] to
start the low-level formatting.
Since low-level formatting will erase all recordable sectors in the SD
card, the formatting will take slightly longer than normal formatting.
You can stop the low-level formatting by selecting [Cancel]. Even in this
case, normal formatting will have been completed and you can use the
SD card as usual.

3 Reverting Camera Settings to the Default
The camera’s shooting settings and menu settings can be reverted to
the default.

Select [Clear all camera settings].
Under the [7] tab, select [Clear all
camera settings], then press <0>.

[OK].
2 Select
Turn the <5> dial to select [OK],
then press <0>.
X The camera’s default settings will be
as shown on the next page.

Before You Start

Setting [Clear all camera settings] will reset the camera to the
following default settings:
Shooting Settings

Image-Recording Settings

AF point selection Automatic selection

Evaluative metering

Single shooting

Exposure
compensation

AEB
Flash exposure
compensation

Live View shoot. Disable
Grid display

Custom Functions No changes

Camera Settings

File name setting

Dust Delete Data

Camera Settings

Image jump w/6
Auto rotate

Highlight alert

Registered
AF point

Canceled
(Center)

My Menu settings

Enlarge display

10 images
On zD

Image Settings
This chapter explains the settings for shooting digital
images: Image-recording quality, ISO speed, Picture
Styles, white balance, and color space.

When the camera is ready to shoot, you can press the
button to see the image settings. (p.186)

Setting the Image-recording Quality
You can set the image size (recorded pixels), image type (JPEG, RAW,
sRAW), and JPEG quality (compression rate).

Selecting the Image Size
3/4/5/6 will record the image in the JPEG. In the 1/9 mode,
the image will require processing with the software provided. 9 is a
small RAW image which is one-fourth (approx. 5.2 megapixels) the size
of a normal RAW image.
Also, RAW/sRAW and JPEG images can be recorded at the same time
on the memory card.

Press the button. (9)
Press the button once or
twice to display the card and image
size on the rear LCD panel.
Image size/Card z WB

the image size.
2 Select
Turn the <5> dial to select the
image size.
If 1 or 9 and 3/4/5/6 are
displayed at the same time, the RAW or
sRAW and JPEG image will be
recorded simultaneously on the card.
Turn the <6> dial to select the card
to record or playback images. (p.73)
Image Size Guide
Image size
3

Approx. 21.0 megapixels (5616x3744)

Approx. 16.6 megapixels (4992x3328)

Approx. 11.0 megapixels (4080x2720)

Approx. 5.2 megapixels (2784x1856)

Approx. 21.0 megapixels (5616x3744)

Approx. 5.2 megapixels (2784x1856)

Setting the Image-recording Quality

You can also use the [2 Image size] menu to set the image size.
For simultaneous image recording, the RAW or sRAW image and the
JPEG image will be recorded with the same file number in the same folder.
If the [5 Record func+media/folder sel.] menu’s [Record func.] is set
to [Rec. separately], you can set the image size (except for 1+JPEG
and 9+JPEG) for the respective card.
In accordance with the selected image size, the
or <1> icon
will be displayed on the right side in the viewfinder. If 9 has been
selected, <1> will be displayed.

File Size and Memory Card Capacity
Image size
3
4
5
6
1
1+3
1+4
1+5
1+6
9
9+3
9+4
9+5
9+6

Maximum Burst (Approx.)
File Size
Possible Shots
(Approx. MB/Shot)
(Approx.)
o High-speed p Low-speed
6.4
290
56 (63)
83 (180)
5.2
350
73 (96)
140 (370)
3.9
470
110 (160)
300 (500)
2.2
840
160 (470)
890 (890)
25.0
75
12 (12)
14 (16)
25.0 + 6.4
54
10 (10)
10 (10)
25.0 + 5.2
57
10 (10)
10 (10)
25.0 + 3.9
60
12 (12)
12 (12)
25.0 + 2.2
64
12 (12)
12 (12)
14.5
130
18 (18)
24 (28)
14.5 + 6.4
82
12 (12)
14 (16)
14.5 + 5.2
90
12 (12)
14 (16)
14.5 + 3.9
97
12 (12)
18 (18)
14.5 + 2.2
100
18 (20)
20 (24)

The number of possible shots and maximum burst apply to a 2GB CF card
based on Canon’s testing standards. Figures in parentheses apply to an Ultra
DMA (UDMA) 2GB CF card based on Canon’s testing standards.
The file size, number of possible shots, and maximum burst during continuous shooting are
based on Canon’s testing standards (JPEG quality: 8, ISO 100, Picture Style: Standard).
Check the viewfinder or top LCD panel for the current number of possible shots.
The file size, number of possible shots, and maximum burst during
continuous shooting will vary depending on the subject, memory card
brand, ISO speed, Picture Style, etc.
In the case of monochrome images, the file size will be smaller so the number
of possible shots will be higher.

Setting the Image-recording Quality

About RAW
The RAW image is the data output by the image sensor and converted
to digital data which is recorded on the memory card as is. The RAW
image is transferred to a personal computer where software (provided)
is used to adjust the image as needed. From the RAW image, the
software can develop and generate the adjusted image in the desired
type such as JPEG or TIFF.

About sRAW
This is a small RAW image which is one-fourth (approx. 5.2
megapixels) the size of a normal RAW image. As with RAW images,
sRAW images can be developed and adjusted with the provided
software. This image type is handy when you do not need a very high
resolution as a normal RAW image.

Maximum Burst During Continuous Shooting
The maximum burst shown on the preceding page
indicates the number of continuous shots that can be taken
with a formatted 2GB CF card based on Canon’s testing
standards.
The actual maximum burst will vary depending on the
subject, memory card brand, image-recording quality
(image size and JPEG quality), ISO speed, drive mode, Picture Style,
Custom Functions, etc. The maximum burst shown are only estimated
figures. In the viewfinder, the approximate maximum burst is indicated
on the right side.
If C.Fn II -2 [High ISO speed noise reduction] is set to [1: On], the
maximum burst will be greatly reduced. (p.163)
If C.Fn I -8 [Safety shift] is set to [2: Enable (ISO speed)], the maximum
burst displayed in the viewfinder will decrease. (p.160)
The maximum burst is displayed even when a memory card is not in the
camera. Make sure that a memory card is loaded before taking a picture.
The maximum burst for is displayed regardless of the drive mode.

Setting the Image-recording Quality

If the viewfinder displays “99” for the maximum burst, it means the maximum
burst is 99 or higher. If 98 or lower is displayed, the maximum burst is 98 or
lower. If you stop the continuous shooting, the maximum burst will increase.
After all the captured images are written to the memory card, the maximum
burst will be as listed on page 53.

3 Setting the JPEG Quality (Compression Rate)
The image-recording quality (compression rate) can be set for each
image size 3/4/5/6.

Select [JPEG quality].

Select the image size.

Under the [2] tab, select [JPEG
quality], then press <0>.

Turn the <5> dial to select the
image size, then press <0>.

the desired quality
3 Set
(compression rate).
Turn the <5> dial to select setting,
then press <0>.
The higher the number, the higher the
quality will be (lower compression).
For 6 - 10, is displayed. For 1 5, is displayed.
The higher the image-recording quality, the fewer the number of possible
shots will be. On the other hand, the lower the image-recording quality, the
higher the number of possible shots will be.

Z: Setting the ISO Speed
The ISO speed is a numeric indication of the sensitivity to light. A higher
ISO speed number indicates a higher sensitivity to light. Therefore, a
high ISO speed is suited for low light and moving subjects. However,
the image may look more coarse with noise, etc. On the other hand, a
low ISO speed is not suited for low light or action shots, but the image
will look finer.
The camera can be set between ISO 100 and 1600 in 1/3-stop
increments.

Press the button. (9)
X The current ISO speed will be
displayed on the top LCD panel and
in the viewfinder.

the ISO speed.
2 SetTurn
the <6/5> dial to set the ISO
speed.

Using a high ISO speed or shooting in high-temperature conditions may
result in more grainy images.
High temperatures, high ISO speeds, or long exposures may cause
irregular colors in the image.
If C.Fn II -3 [Highlight tone priority] is set to [1: Enable], the settable
ISO speed range will be ISO 200 - 1600. (p.164)
With C.Fn I -3 [Set ISO speed range], the ISO speed range can be
extended to ISO 50 (L) to 3200 (H). (p.158)

A Selecting a Picture Style
By selecting a Picture Style, you can obtain the desired image effects
matching your photographic expression or the subject.

Press the button.
When the camera is ready to shoot,
press the button.
X The Picture Style screen will appear.

a Picture Style.
2 Select
Turn the <5> dial to select a Picture
Style, then press <0>.
X The Picture Style will take effect and
the camera will be ready to shoot.
You can also use the [1 Picture Style] menu to select the Picture Style.

Picture Style Effects
Standard
The image looks vivid and sharp.
Portrait
For nice skin tones. The image looks slightly sharp.
Landscape
For vivid blues and greens, and very sharp images.
Neutral
For natural colors and subdued images. This Picture Style assumes
that you will do post-processing with a personal computer.
Faithful
The image is dull and subdued. When the subject is captured under
a color temperature of 5200K, the color is adjusted colorimetrically to
match the subject’s color. This Picture Style assumes that you will do
post-processing with a personal computer.

A Selecting a Picture Style

Monochrome
For black-and-white images.
To obtain natural-looking, black-and-white images, set a suitable
white balance.
With JPEG 3/4/5/6 images, color cannot be restored to the
black-and-white image. Do not use this Picture Style if you want color
JPEG images. When [Monochrome] is selected, <0> will appear
on the rear LCD panel.

User Def. 1-3
You can select a base Picture Style such as [Portrait] or
[Landscape], adjust its parameters as desired and register it under
[User Def. 1] to [User Def. 3]. Any User Defined Picture Style which
has not been set will have the same settings as the Standard Picture
Style.

About the Symbols
The symbols on the upper right of the Picture Style selection screen
refer to parameters such as [Sharpness] and [Contrast]. The numerals
indicate the parameters settings, such as [Sharpness] and [Contrast],
for each Picture Style.
Symbols
g

Filter effect (Monochrome)

Toning effect (Monochrome)

A Customizing the Picture Style
You can customize the Picture Style by adjusting the individual
parameters like [Sharpness] and [Contrast]. To customize
[Monochrome], see the next page.

1 Press the button.
a Picture Style.
2 Select
Turn the <5> dial to select a Picture
Style, then press the button.

a parameter.
3 Select
Turn the <5> dial to select a
parameter, then press <0>.

the parameter.
4 SetTurn
the <5> dial to set the
parameter as desired, then press
<0>.
Press the button to save
the adjusted parameter. The Picture
Style selection screen will reappear.
X Any settings different from the default
will be displayed in blue.
Parameter Settings and Effects
g Sharpness

[0] : Less sharp outline

[+7] : Sharp outline

[-4] : Low contrast

[+4] : High contrast

[-4] : Low saturation

[+4] : High saturation

[-4] : Reddish skin tone

[+4] : Yellowish skin tone

A Customizing the Picture Style

By selecting [Default set.] in step 3, you can revert the respective
Picture Style to its default parameters.
To shoot with the Picture Style you modified, follow step 2 on the
preceding page to select the Picture Style and then shoot.

Monochrome Adjustment
For Monochrome, you can also set [Filter effect] and [Toning effect] in
addition to [Sharpness] and [Contrast].

[Filter effect]
With a Filter effect applied to a
monochrome image, you can make
white clouds or green trees stand out
more.
Filter

Normal black-and-white image with no filter effects.

The blue sky will look more natural, and the white clouds will look crisper.

Or: Orange The blue sky will look slightly darker. The sunset will look more brilliant.
R: Red

The blue sky will look quite dark. Fall leaves will look crisper and brighter.

Skin tones and lips will look fine. Tree leaves will look crisper and
brighter.

Setting the [Contrast] to the plus side will make the filter effect more
pronounced.

[Toning effect]
By applying a toning effect, you can
create a monochrome image in that
color. It can make the image look more
impressive.
The following can be selected: [N:None]
[S:Sepia] [B:Blue] [P:Purple] [G:Green].

A Registering the Picture Style
You can select a base Picture Style such as [Portrait] or [Landscape],
adjust its parameters as desired and register it under [User Def. 1],
[User Def. 2], or [User Def. 3]. You can create Picture Styles whose
parameters such as sharpness and contrast are different. You can also
select a Picture Style already set with the provided software.

1 Press the button.
[User Def.].
2 Select
Turn the <5> dial to select [User
Def. *], then press the
button.

<0>.
3 Press
With [Picture Style] selected, press
<0>.

the base Picture Style.
4 Select
Turn the <5> dial to select the base
Picture Style, then press <0>.
If you already have a Picture Style set
with the provided software, select it
here.

a parameter.
5 Select
Turn the <5> dial to select a
parameter, then press <0>.

A Registering the Picture Style

the parameter.
6 SetTurn
the <5> dial to set the
parameter as desired, then press
<0>.

Press the button to register
the new Picture Style. The Picture
Style selection screen will then
reappear.
X The base Picture Style will be
displayed on the right of [User Def. *].
X The name of the Picture Style having
any modified settings (different from
the default) registered under [User
Def. *] will be displayed in blue.

If a Picture Style has already been registered under [User Def. *], changing
the base Picture Style in step 4 will nullify the parameters of the registered
contents of the Picture Style.
To shoot with the registered Picture Style, follow step 2 for selecting [User
Def. *] on the preceding page.

Selecting the White Balance
White balance (WB) is for making the white areas look white. Normally,
the (Auto) setting will obtain the correct white balance. If naturallooking colors cannot be obtained with , you can set the white
balance manually to suit the respective light source.

Press the button. (9)
Press the button once or
twice to display the white balance on
the rear LCD panel’s upper right.
WB z Card/Image size

the white balance.
2 Select
Turn the <5> dial to select the white
balance.
Icon
Q
W
E
R
Y
U
I
O
P

Mode
Auto
Daylight
Shade
Cloudy, twilight, sunset
Tungsten light
White fluorescent light
Flash
Custom (p.64)
Color temperature (p.69)

Color temperature (Approx. K: Kelvin)
3000 - 7000
5200
7000
6000
3200
4000
6000
2000 - 10000
2500 - 10000

About White Balance
To the human eye, a white object looks white regardless of the type of
lighting. With a digital camera, the color temperature is adjusted with
software to make the white areas look white. This adjustment serves as
the basis for the color correction. The result is natural-looking colors in
the pictures.
You can also use the [1 White balance] menu to set the white balance.
To set Personal white balance, go to the [1 White balance] menu and select
[PC *]. To save the Personal WB to the camera, use the provided software. If no
Personal WB has been registered, the menu will not be displayed.

O Custom White Balance
Custom white balance enables you to manually set the white balance
for a specific light source for better accuracy. Up to five Custom white
balance data can be registered to the camera. You can also append a
name (caption) to the registered Custom white balance data.

3 Registering Custom WB
There are two ways to register Custom white balance data. You can
either take a picture and register it, or register an image already saved
in the memory card.

[Record and register image]
Select [Custom WB regist.].

Under the [1] tab, select [Custom
WB regist.], then press <0>.

the Custom WB No. to be
2 Select
registered.
Press <0>.
Turn the <5> dial to select 1 to 5 for
, then press <0>. The
Custom WB data will be registered
under the selected No.

[Record and register
3 Select
image].
Turn the <5> dial to select [Record
and register image], then press
<0>.
X The LCD monitor will turn off, and the
selected No. [ * ] will blink on the rear
LCD panel.

O Custom White Balance

a solid-white object.
4 Photograph
The plain, white object should fill the
center spot metering circle.
Set the lens focus mode switch to
, then focus manually. (p.86)
Shoot the white object so that a
standard exposure (gray) is obtained.
If it is underexposed or overexposed,
a correct white balance setting might
not be obtained.
X The Custom WB data will be
registered in the camera. When it is
completed, a message will appear on
the screen.
To use the Custom WB, see
“Selecting and Shooting with the
Custom WB data” (p.67).

A Custom WB data can also be registered as follows:
1. Press the button and turn the <5> dial to select .
(p.63)
2. Then turn the <6> dial to select the No. under which the Custom
WB is to be registered.
3. Press the button.
→ [ * ] will blink on the rear LCD panel.
4. Follow step 4 above to photograph a solid-white object.
→ The Custom WB will be registered under the selected No. and a
completion message will appear on the screen.
When a picture is taken, the registered Custom white balance will be
applied. (This registration method does not require the “Selecting and
Shooting with the Custom WB data” step on page 67.)
If [Correct WB may not be obtained with the selected image] is
displayed in step 4, go back to step 1 and try again.
The captured image will not be recorded to the memory card.

O Custom White Balance

[Register image on card]
First follow step 4 under [Record and register image] to take a
picture of a plain, white object. This image saved in the memory
card can then be registered for Custom WB. The procedure up to
step 2 is the same as with [Record and register image].

1 Select [Custom WB regist.].
the Custom WB No. to be
2 Select
registered.
[Register image on card].
3 Select
Turn the <5> dial to select [Register
image on card], then press <0>.
X The images saved in the memory
card will be displayed.

the image to be used for
4 Select
registrating the Custom WB data.
You can also display a four- or nineimage index by pressing the
button.
Turn the <5> dial to select the
image to be registered for the Custom
WB data, then press <0>.

[OK].
5 Select
Turn the <5> dial to select [OK],
then press <0>.
X The Custom WB data will be registered,
and a message will be displayed. Press
<0> to return to step 3.
To use the registered Custom WB
data, see “Selecting and Shooting
with the Custom WB data” (p.67).

O Custom White Balance

3 Selecting and Shooting with the Custom WB data
You can shoot with the registered Custom WB data.
Registered images

Select the registered Custom WB
No.
On the Custom WB registration
screen, select the No. of the
registered Custom WB.

[Set as white balance].
2 Select
Turn the <5> dial to select [Set as
white balance], then press <0>.
X The WB will be set to the registered
.

the picture.
3 Take
X The picture will be taken with the
setting.
You can also select the Custom WB No. while looking at the rear LCD panel.
Press the button and turn the <5> dial to select . Then turn
the <6> dial to select the registered Custom WB No.

3 Naming the Custom WB data
You can append a name (caption) to up to five Custom WB data registered
with [Record and register image] or [Register image on card].

Select the Custom WB No.
On the Custom WB data registration
screen, select the Custom WB No. to
be appended with a name.

O Custom White Balance

[Edit caption].
2 Select
Turn the <5> dial to select [Edit
caption], then press <0>.

any name.
3 Enter
Press the button, and the text
palette will be highlighted in a color
frame and text can be entered.
Operate the <5> dial or <9> to
move the and select the desired
character. Then press <0> to enter
it. You can enter up to 20 characters.
To change the name, first delete the
unnecessary characters. Operate the
<5> dial or <9> to move the cursor
to the right of the character to be
deleted. Then press the button
to delete one character.
After entering the name, press the
button.
X The name will be saved and the
screen will return to step 2. The
entered name will be displayed below
.

Entering a name which indicates the Custom WB’s place or light source type
makes it convenient.

Setting the Color Temperature
You can numerically set the white balance’s color temperature.

Press the button. (9)
Press the button once or
twice to display the white balance on
the rear LCD panel’s upper right.
WB z Card/Image size

.
2 Select
Turn the <5> dial to select
.
the desired value.
3 SetTurn
the <6> dial to set the color
temperature.
You can set it within 2500K to 10000K
in 100K increments.

When setting the color temperature for an artificial light source, set white
balance correction (magenta or green) as necessary.
If you want to set
to the reading taken with a commerciallyavailable color temperature meter, take test shots and adjust the setting
to compensate for the difference between the color temperature meter’s
reading and the camera’s color temperature reading.
You can also use the [1 White balance] menu to set the white balance.

3 White Balance Correction
You can correct the white balance that has been set. This adjustment
will have the same effect as using a commercially-available color
temperature conversion filter or color compensating filter. Each color
can be corrected to one of nine levels.
Users familiar with using color temperature conversion or color
compensating filters will find this feature handy.

White Balance Correction

Select [WB SHIFT/BKT].
Under the [1] tab, select [WB
SHIFT/BKT], then press <0>.

the white balance correction.
2 SetUse
<9> to move the “ ” mark to the

Sample setting : A2, G1

desired position.
B is for blue, A is amber, M is
magenta, and G is green. The color in
the respective direction will be
corrected.
On the upper right, “SHIFT” indicates
the direction and correction amount.
To cancel the white balance
correction, move the “ ” to the center
so that the “SHIFT” is “0, 0”.
Press <0> to exit and return to the
menu.

During the white balance correction, will be displayed in the
viewfinder and on the rear LCD panel.
One level of the blue/amber correction is equivalent to 5 mireds of a color
temperature conversion filter. (Mired: A measurement unit indicating the
density of a color temperature conversion filter.)

3 White Balance Correction

White Balance Auto Bracketing
With just one shot, three images having a different color tone can be
recorded simultaneously. Based on the color temperature of the current
white balance setting, the image will be bracketed with a blue/amber
bias or magenta/green bias. This is called white balance bracketing
(WB-BKT). White balance bracketing is possible up to ±3 levels in
single-level increments.

Set the white balance bracketing
amount.

B/A bias ±3 levels

In step 2 for white balance correction,
when you turn the <5> dial, the “ ”
mark on the screen will change to “
”
(3 points). Turning the dial to the right
sets the B/A bracketing, and turning it to
the left sets the M/G bracketing.
X On the right side of the screen, “BKT”
indicates the bracketing direction and
the bracketing amount is also displayed.
Press <0> to exit and return to the menu.
To cancel the bracketing, set “BKT” to
“±0” (“
” becomes “ ” (1 point)).

Bracketing Sequence
Correct white balance, blue (B) bias, and amber (A) bias. Or, correct
white balance, magenta (M) bias, and green (G) bias.
During WB bracketing, the maximum burst for continuous shooting will be
lower and the number of possible shots will also decrease to one-third the
normal number. Also, the white balance icon will blink on the rear LCD panel.
You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, the memory card will take
longer to record the shot.
“BKT” stands for Bracketing.

3 Setting the Color Space
The color space refers to the range of reproducible colors. With this
camera, you can set the color space for captured images to sRGB or
Adobe RGB. For normal images, sRGB is recommended.

Select [Color space].
Under the [1] tab, select [Color
space], then press <0>.

the desired color space.
2 SetSelect
[sRGB] or [Adobe RGB], then
press <0>.

About Adobe RGB
This is mainly used for commercial printing and other industrial uses.
This setting is not recommended if you do not know about image
processing, Adobe RGB, and Design rule for Camera File System 2.0
(Exif 2.21). Since the image will look very subdued with sRGB personal
computer environment and printers not compatible with Design rule for
Camera File System 2.0 (Exif 2.21), post-processing of the image with
software will be required.

If the captured image was shot in the Adobe RGB color space, the first
character in the file name will be an underscore “_”.
The ICC profile is not appended. The ICC profile is explained in the
Software Instruction Manual in the CD-ROM.

Selecting the Media, Folder, and Recording Method
This Instruction Manual assumes that a CF card or SD card is
in the camera. When an external media is used via the
Wireless File Transmitter WFT-E2/E2A (sold separately), the
icon will appear as the third recording media. It can be
selected in the same way as with the CF card and SD
card .

Selecting a Memory Card
If only the CF card or SD card is in the camera, the memory
card for recording will be selected automatically. If both the CF and SD
cards are in the camera, you can select the card for recording images
as follows:

Press the button. (9)
Press the button once or
twice to display the memory card and
image size on the rear LCD panel’s
left.
Card/Image size z WB

the memory card.
2 Select
Turn the <6> dial to select the
memory card for recording images.
A : Record to CF card
S : Record to SD card
Turn the <5> dial to select the
image size. (p.52)

If the recording method (p.74) has been set to [Rec. separately] [Rec. to
multiple], the image will be recorded to both the CF and SD cards. The
selection will then specify which card to playback the images.
You can also use the [5 Record func+media/folder sel.] menu’s
[Record/play] ([Playback]) option to select the memory card used for
image recording and playback.

Selecting the Media, Folder, and Recording Method

3 Setting the Recording Method
You can set how the image is recorded to the memory card.

Select [Record func+media/folder
sel.].
Under the [5] tab, select [Record
func+media/folder sel.], then press
<0>.

[Record func.].
2 Select
Turn the <5> dial to select [Record
func.], then press <0>.

the recording method.
3 Select
Turn the <5> dial to select the
recording method, then press <0>.
Standard
When both memory cards are in the camera, the selected card will
record the images.
Auto switch media
When both memory cards are in the camera, the selected card will
record the images. Then when the card becomes full, the camera
will automatically switch to the other card to record images.
Rec. separately
Each image is recorded to both the CF and SD cards. The image
size (3/4/5/6/1/9) to be recorded can be set individually
for each card. (p.52) For example, you can record a JPEG image to
both cards or a RAW image to one card and sRAW to the other card.
Rec. to multiple
Each image is recorded to both the CF and SD cards
simultaneously. 1+JPEG or 9+JPEG can also be selected.
(p.52)

Selecting the Media, Folder, and Recording Method

When [Auto switch media] is set, the card for recording will switch from
f to g.
When [Rec. separately] or [Rec. to multiple] is set, the image will be recorded
under the same file number in both the CF and SD cards. The number of shots
remaining displayed on the top LCD panel and in the viewfinder is based on the card
with fewer remaining shots than the other card. If one of the cards becomes full,
[Card* full] will be displayed and shooting will be disabled. If this happens, either
replace the card or set the recording method to [Standard] or [Auto switch
media] and select the card with remaining space, and then shooting can continue.

3 Creating a Folder

Select [Folder].
In step 2 for “Setting the Recording
Method,” select [Folder], then press
<0>.

[Create folder].
2 Select
Turn the <5> dial to select [Create
folder], then press <0>.

[OK].
3 Select
X A new folder with a higher one-up
folder number is created.

3 Selecting a Folder
Lowest file number
Quantity of images in folder

Turn the <5> dial to select the
folder, then press <0>.
Look at the images on the right to
help you select the folder you want.
Subsequent captured images will be
recorded into the selected folder.

Folder name
Highest file number

Selecting the Media, Folder, and Recording Method

About Folders
As with “100EOS1D” for example, the folder name starts with three digits
(folder number) followed by five characters. A folder can contain up to 9999
images (file No. 0001 - 9999). When a folder becomes full, a new folder with a
higher one-up folder number is created automatically. Also, if manual reset
(p.80) is executed, a new folder will be created automatically. Folders
numbered from 100 to 999 can be created.

Creating Folders with a Personal Computer
With the memory card open on the screen, create a new folder named “DCIM”.
Open the DCIM folder and create as many folders as necessary to save and
organize your images. The folder name must follow the “100ABC_D” format
where the first three digits is 100 - 999 followed by five alphanumeric
characters. The five characters can be a combination of upper- or lower-case
letters from A to Z, numerals, and an underscore “_”. There can be no spaces
in the folder name. Also, folder names cannot have the same three-digit
number such as “100ABC_D” and “100W_XYZ” even if the letters are
different.

3 Changing the File Name
The file name has four alphanumeric characters
followed by a four-digit image number (p.79) and
(Ex.) 7E3B0001.JPG
extension. The first four alphanumeric characters
are set upon factory shipment and unique to the
camera. However, you can change it.
With “User setting1,” you can change and register the four characters as
desired. With “User setting2,” if you register three characters, the fourth
character from the left will be appended automatically to indicate the
image size.

Registering the File Name (first 4 characters)

Select [File name setting].
Under the [5] tab, select [File name
setting], then press <0>.

[Change User setting].
2 Select
Turn the <5> dial to select [Change
User setting*], then press <0>.

any alphanumeric
3 Enter
characters.
With User setting1, enter 4 characters.
With User setting2, enter 3 characters.
Operate the <5> dial or <9> to move
the cursor to the right of the character to
be deleted. Then press the button
to delete the character.
Press the button, and the text
palette will be highlighted in a color
frame and text can be entered.

3 Changing the File Name

Operate the <5> dial or <9> to
move the and select the desired
character. Then press <0> to enter
it.
Enter the required number of
alphanumeric characters, then press
the button.
X The new file name will be registered
and the screen in step 2 will reappear.

the registered file name.
4 Select
Turn the <5> dial to select [File

name], then press <0>.
Turn the <5> dial to select the
registered file name.
If User setting2 has been registered,
select “*** (the 3 characters
registered) + image size.”

About User setting2
When you select the “*** + image size” registered with User setting2 and
take pictures, the image size character will be automatically appended as
the file name’s fourth character from the left. The meaning of the file name
characters is as follows:
“*** L” = 3 (JPEG Large), 1
“***M” = 4 (JPEG Medium1)
“*** N” = 5 (JPEG Medium2)
“*** S” = 6 (JPEG Small), 9
When the image is transferred to a personal computer, the automatically
appended fourth character will be included. You can then see the image size
without having to open the image. The image type (RAW, sRAW, JPEG) can
be distinguished with the extension.
The first character cannot be an underscore “_”.
The extension will be “.JPG” for JPEG images and “.CR2” for RAW and
sRAW images.

3 File Numbering Methods
The 4-digit file number is like the frame number
on a roll of film. The captured images are
(Ex.) 7E3B0001.JPG
assigned a sequential file number from 0001 to
9999 and saved to one folder. You can also
change how the file number is assigned.

Select [File numbering].
Under the [5] tab, select [File
numbering], then press <0>.

the file numbering method.
2 Select
Turn the <5> dial to select the
desired method, then press <0>.

Continuous
Continues the file numbering sequence even after the memory
card is replaced or a new folder is created.
Even after you replace the memory card or create a new folder, the file
numbering continues in sequence up to 9999. This is convenient when you
want to save the images numbered anywhere between 0001 to 9999 in
multiple cards or folders into one folder in your personal computer.
If the replacement memory card or existing folder already contains
images recorded previously, the file numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to save images with continuous file numbering, use a
newly formatted memory card each time.
File numbering after replacing
the memory card
Card A

File numbering after
changing the folder

3 File Numbering Methods

Auto Reset
The file numbering restarts from 0001 each time the memory card
is replaced or a new folder is created.
Whenever the memory card is replaced or a new folder created, the file
numbering starts from 0001. This is convenient if you want to organize
images according to memory cards or folders.
If the replacement memory card or existing folder already contains
images recorded previously, the file numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to save images with the file numbering starting from
0001, use a newly formatted memory card each time.
File numbering after replacing
the memory card
Card A

File numbering after
changing the folder
Card A

Manual Reset
The file numbering starts from 0001 in the new folder.
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder
starts from 0001. This is convenient when you want to use different
folders for the images taken yesterday and the ones taken today, for
example. After the manual reset, the file numbering returns to
continuous or auto reset.

If the folder number is 999 and the file number reaches 9999, you will not be
able to take any more pictures even if the memory card is not full. A
message asking you to replace the memory card will appear on the LCD
monitor. Either replace the memory card or switch to the other memory card
in the camera.

Setting the AF and
Drive Modes
The Area AF has 45 AF points
(19 high-precision cross-type
points and 26 Assist AF points).
You can select any one of the 19
cross-type points to match your
composition.
You can also select the AF mode to match the shooting
conditions and subject and select the best drive mode.

stands for auto focus. stands for manual focus.

E: Selecting the AF Mode
Select the AF mode suiting the shooting conditions or subject.

On the lens, set the focus mode
switch to .

the button.
2 Press
(9)
the AF mode.
3 Select
Turn the <6> dial to select the AF
mode.
ZzX

One-Shot AF for Still Subjects
Suited for still subjects. When you
press the shutter button halfway, the
camera will focus only once.
When focus is achieved, the AF point
which achieved focus will flash in red,
and the focus confirmation light
in the viewfinder will also light.
With evaluative metering, the
exposure setting will be set at the
same time focus is achieved.
While you hold down the shutter button
halfway, the focus will be locked. You can
then recompose the shot if desired.
AF is also possible by pressing the
button.

E: Selecting the AF Mode

If focus cannot be achieved, the focus confirmation light in the
viewfinder will blink. If this occurs, a picture cannot be taken even if the
shutter button is pressed completely. Recompose the picture and try and
focus again. Or see “When Autofocus Fails” (p.86).
If the [2 Beep] menu is set to [Off], the beeper will not sound when focus is achieved.

Focus Lock
After achieving focus with One-Shot AF, you can lock the focus on a subject
and recompose the shot. This is called “focus lock.” This is convenient when
you want to focus a subject not covered by the Area AF.

AI Servo AF for Moving Subjects
This AF mode is for moving subjects
when the focusing distance keeps
changing. While you hold down the
shutter button halfway, the subject
will be focused continuously.
The exposure is set at the moment
the picture is taken.
AF is also possible by pressing the
button.

Focus Tracking with AI Servo AF
If the subject approaches or retreats from the camera at a constant rate, the
camera tracks the subject and predicts the focusing distance immediately before
the picture is taken. This is for obtaining correct focus at the moment of exposure.
When the AF point selection is automatic (p.84), the camera first
uses the center AF point to focus. During autofocusing, if the subject
moves away from the center AF point, focus tracking continues as
long as the subject is covered by the Area AF.
With a manually selected AF point, the selected AF point will focus
track the subject.
With AI Servo AF, the beeper will not sound even when focus is achieved. Also,
the focus confirmation light in the viewfinder will not light.

S Selecting the AF Point
Automatic AF Point Selection
From among the 45 AF points, the camera selects the AF point
automatically to suit the shooting conditions.

Manual AF Point Selection
You can manually select any of the 19 cross-type AF points. This is
best when you want to focus the target subject at will, or autofocus
quickly while composing the shot.

the button. (9)
1 Press
X The current AF point will light in the viewfinder.
the AF point.
2 Select
To select a horizontal AF point, turn the <6>
Automatic AF point selection:
AF

Manual AF point selection:
SEL /SEL AF

dial. If all the peripheral AF points light up,
automatic AF point selection will take effect.
The AF point selection will follow the
periphery as you turn the <5> dial. If the
current AF point is near the center, the AF
point selection will follow an oval path. If
the current AF point is along the periphery,
the AF point selection will follow the
periphery and stop at the top or bottom.
By pressing <9>, you can select the
center AF point z automatic selection.
When you press the shutter button
halfway, the camera will be ready to shoot.

The 26 Assist AF points are not user selectable.
The <9> cannot be used to manually select any AF point other than the center AF point.
With C.Fn III -9 [Selectable AF point], the selectable AF points can be
limited to the inner or outer 9 AF points. (p.170)
With C.Fn III -8 [AF expansion w/selected pt], the manually-selected AF point’s
adjacent left and right AF points or the surrounding AF points can also be made active. (p.170)
By registering the AF point you use frequently, you can switch to it
instantly by setting C.Fn III -10-1 or C.Fn III -6-6 (p.171, 168).

S Selecting the AF Point

Lens’ Maximum Aperture and AF Sensitivity
The EOS-1Ds Mark III can execute high-precision AF with lenses
whose maximum aperture is f/2.8 or larger.
With f/2.8 and faster lenses*

Assist AF points
Cross-type points

With the 19 AF points indicated by ,
high-precision, cross-type AF (both
horizontal- and vertical-line sensitive) is
possible. With cross-type AF, vertical-line
detection is about 2 times as sensitive as
horizontal-line detection. The remaining
26 Assist AF points are horizontal-line
sensitive only.
* Excluding the EF24mm f/2.8 and EF28mm f/2.8.

With lenses whose maximum aperture is f/4 or larger
If the maximum aperture of the lens or Extender and lens combination
is faster than f/4, the center AF point will work as a high-precision,
cross-type point sensitive to both horizontal and vertical lines. The
remaining 18 AF points and the 26 Assist AF points work as horizontalline sensitive AF points.
With lenses whose maximum aperture is f/5.6 or larger
With lenses whose maximum aperture is larger than f/5.6, all the AF
points, including the Assist AF points, will be horizontal-line sensitive only.
With lenses whose maximum aperture is f/8 or larger
With lenses whose maximum aperture is larger than f/8, AF will be
possible with the center AF point which will be horizontal-line sensitive.
AF will not work with the other AF points.
When the EF70-200mm f/2.8L USM is used with an Extender, use the center
AF point only. The other AF points may cause a focusing error.
When using the EF24mm f/2.8 or EF28mm f/2.8 lens,
the 13 AF points shown on the right can be used as
cross-type points. The remaining 6 AF points will be
horizontal-line sensitive.

When Autofocus Fails
Autofocus can fail to achieve focus (the focus confirmation light
blinks) with certain subjects such as the following:

Subjects difficult to focus
Low-contrast subjects
Example: Blue sky, solid-color walls, etc.
Subjects in low light
Extremely backlit and reflective subjects
Example: Car with a reflective body, etc.
Overlapping near and far objects
Example: Animal in a cage, etc.
Repetitive patterns
Example: Skyscraper windows, computer keyboards, etc.
In such cases, do one of the following:
(1) With One-Shot AF, focus an object at the same distance as the
subject and lock the focus before recomposing. (p.83)
(2) Set the lens focus mode switch to and focus manually.

Manual Focusing
the lens focus mode switch to
1 Set
.
the subject.
2 Focus
Focus by turning the lens focusing
ring until the subject looks sharp in
the viewfinder.

If you press the shutter button halfway during manual focusing, the active
AF point and the focus confirmation light in the viewfinder will light
when focus is achieved.

R: Selecting the Drive Mode

1 Press the button. (9)
the drive mode.
2 Select
While looking at the top LCD panel,
turn the <5> dial.
u : Single shooting
When you press the shutter button
completely, one shot will be taken.
o: High-speed continuous
shooting (Max. 5 shots per sec.)
p: Low-speed continuous
shooting (Max. 3 shots per sec.)
In the o and p modes, the
camera will shoot continuously
while you hold down the shutter
button completely.
k : Self-timer (10-sec. delay)
l : Self-timer (2-sec. delay)
See the next page for the selftimer operation procedure.
6 : Silent single shooting
The shooting sound for single
shooting is quieter than .
When the internal buffer memory becomes full during continuous
shooting, “buSY” will be displayed on the top LCD panel and in the
viewfinder and shooting will be disabled temporarily. As the
captured images are recorded to the memory card, you will be able
to shoot more images. Press the shutter button halfway to check in
Maximum
the viewfinder’s right for the current maximum burst. This is the
burst
maximum number of shots that can be taken continuously.
If “Card * Full” is displayed in the viewfinder and on the top LCD panel, make
sure to wait until the access lamp stops blinking, then replace the memory card.
If the battery level drops to about 10% (p.29), the drive mode icon (o,
p,u) will blink.

j Self-timer Operation
the button.
1 Press
(9)
either or .
2 Select
Look at the top LCD panel and turn
the <5> dial to select or
.
k : 10-sec. self-timer
l : 2-sec. self-timer

the picture.
3 TakeFocus
the subject and press the
shutter button completely.
X The self-timer lamp will blink, and 10
sec. or 2 sec. later, the picture will be
taken.
X During the self-timer operation, the
top LCD panel counts down the
seconds until the picture is taken.
X The lamp’s blinking will become
faster two seconds before the picture
is taken.

Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so prevents the camera from focusing the subject.
Use a tripod when using the self-timer.
Before starting the self-timer, look through the viewfinder or cover it with
the eyepiece shutter (p.103).
To cancel the self-timer after it starts, set the power switch to <2>.
When using the self-timer to shoot only yourself, use focus lock (p.83) for
an object at about the same distance as where you will be.
The 2-second self-timer is effective for close-ups or photo duplicating
work to prevent camera shake (camera movement while the shutter
button is pressed).

Exposure Control
Select the shooting mode to suit the subject or shooting
objective. You can set the shutter speed and/or aperture
to obtain the exposure you want.
Also, with an EX-series Speedlite, you can take flash
pictures as easily as normal shooting without flash.

First set the power switch to .

q Metering Modes

1 Press the button. (9)
the metering mode.
2 Select
While looking at the top LCD panel,
turn the <6> dial.
q: Evaluative metering
w: Partial metering
r: Spot metering
e: Center-weighted average
metering

q Evaluative metering
This is the camera’s standard metering mode
suited for most subjects even under backlit
conditions. After detecting the subject’s position
in the viewfinder, the brightness, background,
front and back lighting conditions, and other
complex lighting elements, the camera sets the
proper exposure for the main subject.

w Partial metering
Effective when the background is much brighter
than the subject due to backlighting, etc. The
metering is weighted at the center covering about
8.5% of the viewfinder area.

r Spot metering
This is for metering a specific part of the
subject or scene. The metering is
weighted at the center covering about
2.4% of the viewfinder area.
When C.Fn I -7 [Spot meter. link to AF point] is set to [1:Enable (use
active AF point)], spot metering can be linked to the 19 (or 9 outer or inner
points) AF points. (p.160)

q Metering Modes

e Center-weighted average
metering
The metering is weighted at the center
and then averaged for the entire scene.

Multi-Spot Metering
With multiple spot meter readings, you can see the relative exposure levels of
multiple areas in the picture and set the exposure to obtain the desired result.

1 Set the metering mode to r spot metering.
2 Press the button. (8)
Aim the spot metering circle over the area where you want a
relative exposure reading, then press the button.
X On the right of the viewfinder, the relative exposure level will be displayed for the spot meter
reading taken. For the exposure, the average of the spot meter readings will be set.

While referring to the exposure level indicator’s three spot metering marks, you can set
the exposure compensation to set the final exposure and obtain the desired result.
You can take up to eight spot meter readings for one picture.
The exposure setting obtained with multi-spot meter readings will be
canceled in the following cases:
• After taking the last spot meter reading, 16 seconds elapse.
• You pressed the , , , , , or button.
• After taking the picture, you let go of the shutter button.
Multi-spot metering is possible even with AF point-linked spot metering (C.Fn I -7-1).

d: Program AE
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
* stands for Program.
* AE stands for Auto Exposure.

1 Press the button. (9)
.
2 Select
Turn the <6/5> dial to select
.

the subject.
3 Focus
Look through the viewfinder and aim
the selected AF point over the subject.
Then press the shutter button halfway.
X The AF point which achieves focus
flashes in red, and the focus
confirmation light in the
viewfinder’s bottom right lights.
(In the One-Shot AF + automatic AF
point selection mode)
X The shutter speed and aperture will be
set automatically and displayed in the
viewfinder and on the top LCD panel.

the shutter speed and
4 Check
aperture display.
A correct exposure will be obtained
as long as the shutter speed and
aperture display do not blink.

the picture.
5 TakeCompose
the shot and press the
shutter button completely.

If “30"” shutter speed and the maximum aperture
blink, it indicates underexposure.
Increase the ISO speed or use flash.
If the “8000” shutter speed and the minimum
aperture blink, it indicates overexposure.
Lower the ISO speed or use an ND filter (sold
separately) to reduce the amount of light entering
the lens.
If the focus confirmation light blinks, the shutter will lock and a
picture cannot be taken. (p.86)
When automatic AF point selection is used (p.84), multiple AF points
may flash simultaneously when focus is achieved.

About Program Shift
In Program AE mode, you can freely change the shutter speed and
aperture combination (Program) set by the camera while maintaining the
same exposure. This is called Program Shift.
To do this, press the shutter button down halfway, then turn the <6>
dial until the desired shutter speed or aperture value is displayed.
Program Shift is canceled automatically after the picture is taken.
Program Shift cannot be used with flash.

s: Shutter-Priority AE
In this mode, you set the shutter speed and the camera automatically
sets the aperture to obtain the correct exposure matching the
brightness of the subject. This is called shutter-priority AE.
A faster shutter speed can freeze the action or moving subject. Or a
slower shutter speed can create a blurred effect, giving the impression
of motion.
* stands for Time value.

Fast shutter speed

Slow shutter speed

Select .
Press the button and turn
the <6/5> dial to select .

the desired shutter speed.
2 SetWhile
looking at the top LCD panel,
turn the <6> dial.

the subject.
3 Focus
Press the shutter button halfway.
X The aperture is set automatically.

the viewfinder display and
4 Check
shoot.
As long as the aperture is not
blinking, the exposure will be correct.

s: Shutter-Priority AE

If the maximum aperture blinks, it indicates
underexposure.
Turn the <6> dial to set a slower shutter
speed until the aperture stops blinking or
set a higher ISO speed.

If the minimum aperture blinks, it indicates
overexposure.
Turn the <6> dial to set a faster shutter
speed until the aperture stops blinking or
set a lower ISO speed.

Shutter Speed Display
The shutter speeds from “8000” to “4” indicate the denominator of the
fractional shutter speed. For example, “125” indicates 1/125 sec. Also, “0"5”
indicates 0.5 sec. and “15"” is 15 sec.

f: Aperture-Priority AE
In this mode, you set the desired aperture and the camera sets the
shutter speed automatically to obtain the correct exposure suiting the
subject brightness. This is called aperture-priority AE.
A higher f/number (smaller aperture hole) will make more of the
foreground and background fall within acceptable focus. On the other
hand, a lower f/number (larger aperture hole) will make less of the
foreground and background fall within acceptable focus.
* stands for Aperture value (aperture opening).

With a large aperture opening

With a small aperture opening

Select .
Press the button and turn
the <6/5> dial to select .

the desired aperture.
2 SetWhile
looking at the top LCD panel,
turn the <6> dial.

the subject.
3 Focus
Press the shutter button halfway.
X The shutter speed is set
automatically.

the viewfinder display and
4 Check
shoot.
As long as the shutter speed is not
blinking, the exposure will be correct.

f: Aperture-Priority AE

If the “30"” shutter speed blinks, it indicates
underexposure.
Turn the <6> dial to set a larger aperture
(smaller f/number) until the blinking stops or
set a higher ISO speed.

If the “8000” shutter speed blinks, it
indicates overexposure.
Turn the <6> dial to set a smaller
aperture (larger f/number) until the blinking
stops or set a lower ISO speed.

Aperture Display
The larger the f/number, the smaller the aperture opening will be. The
aperture values displayed will differ depending on the lens. If no lens is
attached to the camera, “00” will be displayed for the aperture value.

Depth-of-Field Preview
Press the depth-of-field preview button
to stop down to the current aperture
setting. You can check the depth of field
(range of acceptable focus) through the
viewfinder.

A higher f/number will make more of the foreground and background fall
within acceptable focus. However, the viewfinder will look darker.
If the depth of field is difficult to discern, hold down the depth-of-field
preview button while turning the <6> dial.
The exposure will be locked (AE lock) while the depth-of-field preview
button is pressed.

a: Manual Exposure
In this mode, you set both the shutter speed and aperture as desired. To
determine the exposure, refer to the exposure level indicator in the
viewfinder or use a commercially-available handheld exposure meter.
This method is called manual exposure.
* stands for Manual.

Select .
Press the button and turn
the <6/5> dial to select .

the desired shutter speed.
2 SetWhile
looking at the top LCD panel,
turn the <6> dial.

the desired aperture.
3 SetMake
sure the power switch is set to
.
While looking at the top LCD panel,
turn the <5> dial.
You can also set it with the
button and <6/5> dial.

the subject.
4 Focus
Press the shutter button halfway.
X The exposure setting will be displayed.
On the right of the viewfinder, the
exposure level indicator
indicates the current exposure level
relative to the standard exposure
index .

the exposure and take the
5 Set
picture.
Check the exposure level and set the
desired shutter speed and aperture.

O Exposure Compensation
Exposure compensation is used to alter the standard exposure set by
the camera. You can make the image look brighter (increased
exposure) or darker (decreased exposure). You can set the exposure
compensation up to ±3 stops in 1/3-stop increments.

Check the exposure level
indicator.
Press the shutter button halfway and
check the exposure level indicator.

Increased exposure

Decreased exposure

the exposure compensation
2 Set
amount.
Make sure the power switch is set to
.
While looking at the viewfinder or top
LCD panel, turn the <5> dial.
Turn the <5> dial while pressing the
shutter button halfway or within (9)
after pressing the shutter button
halfway.
X When exposure compensation has
been set, the icon will be
displayed in the viewfinder.
To cancel exposure compensation,
set the exposure level indicator
to the standard exposure index (
or ).

3 Take the picture.
The exposure compensation amount will remain in effect even after you
set the power switch to <2>.
Take care not to turn the <5> dial and change the exposure
compensation inadvertently. To prevent this, set the power switch to
<1>.
You can also set it with the button and <6/5> dial.

h Auto Exposure Bracketing (AEB)
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±3 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.

Hold down the and
buttons
simultaneously. (9)
X The icon and “0.0” will appear
on the top LCD panel.

the AEB amount.
2 SetTurn
the <6/5> dial to set the
AEB amount.
“1.0” is the AEB increment, and
is the AEB amount.

picture.
3 TakeIn thethecurrent
drive mode, the pictures

Standard
exposure

Decreased Increased
exposure exposure

will be taken in this sequence: Standard
exposure, decreased exposure, and
increased exposure.
After the three bracketed shots are taken,
AEB will not be canceled. To cancel AEB,
set the AEB increment to “0.0”.

During AEB shooting, the icon in the viewfinder and the icon
on the top LCD panel will blink.
The AEB setting will be canceled automatically if the power switch is set
to <2> or if the flash is ready.
When the shooting mode is bulb or you use flash, AEB cannot be used.
If the drive mode is set to single shooting or <6>, you must press the
shutter button three times. When or
is set and you hold down
the shutter button completely, the three bracketed shots will be taken
continuously. Then the camera will stop shooting. When or is
set, the three bracketed shots will be taken after a 10-sec. or 2-sec. delay.
AEB can also be combined with exposure compensation.

A AE Lock
Use AE lock when the area of focus is to be different from the exposure
metering area or when you want to take multiple shots at the same exposure
setting. Press the button to lock the exposure, then recompose and take
the shot. This is called AE lock. It is effective for backlit subjects.

Focus the subject.
Press the shutter button halfway.
X The exposure setting will be displayed.

the button. (9)
2 Press
X The icon will light in the
viewfinder and the exposure setting
will be locked (AE lock).
Each time you press the button,
it locks the current exposure setting.

and take the picture.
3 Recompose
The exposure level indicator will show
the AE lock exposure level and the
current exposure level in real-time.
If you want to maintain the AE lock
while taking more shots, hold down
the button and press the shutter
button to take another shot.

AE Lock Effects
Metering Mode

q Evaluative
metering*

w Partial metering
r Spot metering
e Center-weighted

AF Point Selection Method
Automatic Selection

Manual Selection

AE lock is applied at the AF AE lock is applied at the
point that achieved focus.
selected AF point.

AE lock is applied at the center AF point.

average metering
* When the lens’ focus mode switch is set to , AE lock is applied at the center AF point.

Bulb Exposures
When bulb is set, the shutter stays open while you hold down the
shutter button completely, and closes when you let go of the shutter
button. This is called bulb exposure. Use bulb exposures for night
scenes, fireworks, the heavens, and other subjects requiring long
exposures.

Select “buLb”.
Press the button and turn
the <6/5> dial to select “buLb”.

the desired aperture.
2 SetWhile
looking at the top LCD panel,
turn the <6/5> dial.
c

Take the picture.
Press the shutter button completely.
X The elapsed exposure time will be
displayed on the top LCD panel.
1: min. 2: sec. 3: hour

Since bulb exposures produce more noise than usual, the image might
look rough or grainy.
For bulb exposures, using Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately) is recommended.
When C.Fn II -1 [Long exp. noise reduction] is set to [1:Auto] or
[2:On], noise generated by the bulb exposure can be reduced. (p.163)

U LCD Panel Illumination
Each time you press the button,
the illumination of the top and rear LCD
panels will turn on or off (9). During a
bulb exposure, pressing the shutter
button completely will turn off the LCD
panel illumination.

Eyepiece Shutter
If your eye is not looking at the
viewfinder, stray light entering the
eyepiece can adversely affect the
exposure. To prevent this, slide the
eyepiece shutter lever as shown by the
arrow to shutter the eyepiece.

Connecting the Remote Switch
You can connect Remote Switch RS-80N3 or Timer Remote Controller
TC-80N3 (both sold separately) or any EOS accessory equipped with
an N3-type terminal to the camera and shoot with it.
To operate the accessory, refer to its instruction manual.

the terminal cover.
1 Open
Open the upper cover.
the plug to the remote
2 Connect
control terminal.
Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
plug’s silver part and pull out.

Mirror Lockup
Although using the self-timer or Remote Switch can prevent camera
shake, using mirror lockup to prevent camera vibrations can also help
when you use a super telephoto lens or shoot close ups.
When C.Fn III -15 [Mirror lockup] is set to [1:Enable] or [2:Enable:
Down with SET] (p.172), shooting with mirror lockup is possible.

1 Focus the subject, press the shutter button completely
and release it.

X The mirror will lockup and <2> will blink on the top LCD panel.

2 Press the shutter button completely again.
X The picture will be taken.
With [1] set, the mirror will go back down when the picture is
taken.
With [2] set, the mirror lockup will remain even after the picture is
taken. To cancel the mirror lockup, press <0>.
In very bright light such as at the beach or ski slope on a sunny day, take
the picture promptly after mirror lockup.
During mirror lockup, do not point the camera lens at the sun. The sun’s
heat can scorch and damage the shutter curtains.
If you use bulb exposures, the self-timer, and mirror lockup in
combination, keep pressing the shutter button completely (self-timer
delay time + bulb exposure time). If you let go of the shutter button
during the 10-sec./2-sec. self-timer countdown, there will be a shutterrelease sound. This is not the actual shutter release (no picture is taken).
When [1:Enable] is set, single shooting will take effect even if the drive
mode is continuous. When [2:Enable: Down with SET] is set, the
current drive mode will take effect for the shooting.
When the self-timer is set to or , the picture will be taken
after 10 sec. or 2 sec. respectively.
The mirror locks up, and after 30 seconds, it will go back down
automatically.
For mirror lockup shots, using Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately) is recommended.

Flash Photography
Using an EX-series Speedlite
An EX-series Speedlite (sold separately) makes flash photography as
easy as normal shooting without flash. You can easily do the flash
operations below. For detailed instructions, see the EX-series
Speedlite’s instruction manual.

E-TTL II Autoflash
E-TTL II is an autoflash exposure system incorporating improved
flash exposure control and lens focusing distance information,
making it more precise than the previous E-TTL system (evaluative
flash metering with preflash). The camera can execute E-TTL II
autoflash with any EX-series Speedlite.

• High-Speed Sync (FP flash)
With high-speed sync, you can set a flash sync speed faster than 1/
250 sec.

• FE (Flash Exposure) Lock
Press the camera’s button to lock the flash exposure at the
desired part of the subject.

• Flash Exposure Compensation
In the same way as normal exposure compensation, you can set
exposure compensation for flash. You can set the flash exposure
compensation up to ±3 stops in 1/3-stop increments.
With the camera, set it by pressing and turning the <5> dial.

• FEB (Flash Exposure Bracketing)
The flash output is changed automatically for three successive shots
(only with FEB-compatible Speedlites). Set flash exposure
bracketing up to ±3 stops in 1/3-stop increments. During FEB
shooting, the icon will blink in the viewfinder.

• E-TTL II Wireless Autoflash with Multiple Speedlites
As with wired, multiple Speedlites, wireless E-TTL II autoflash with
multiple Speedlites (those compatible with wireless flash) provides
all the above features. Sophisticated lighting effects can be obtained
since connection cables are unnecessary.

Flash Photography

3 Flash Function Settings and Flash Custom Functions
When an EX-series Speedlite (such as the 580EX II) controllable by the
camera is attached, you can use the camera’s menu screen to set the
Speedlite’s flash function settings such as the flash mode, FEB, and 1st
or 2nd curtain sync, and wireless flash. Flash Custom Functions can
also be enabled or disabled.
Turn on the Speedlite before setting its functions.
For details on which Speedlite settings the camera can set, see the EXseries Speedlite’s instruction manual.

Select [External Speedlite
control].
Under the [6] tab, select [External
Speedlite control], then press <0>.

either [Flash function
2 Select
settings] or [Flash C.Fn settings].
Turn the <5> dial to select the menu
item, then press <0>.
Flash function settings

the flash function settings.
3 SetSelect
a flash function and set it as
desired. The procedure is the same
as setting a menu function.

Flash C.Fn settings

On the flash function settings screen,
the settable items, current settings,
flash mode setting, and flash Custom
Function settings might look different
on your camera.
To reset the flash settings to the
default, press the button
while the flash function setting screen
is displayed.

Flash Photography

Metered Manual Flash Exposure
This is for close-up flash photography when you want to set the flash level
manually. Use an 18% gray card and an EX-series Speedlite which has
manual flash mode. Follow the instructions below:
1. Set the camera and Speedlite settings.
• Set the camera’s shooting mode or .
• Set the Speedlite to manual flash mode.
2. Focus the subject.
• Focus manually.
3. Set up the 18% gray card.
• Place the gray card at the subject’s position.
• In the viewfinder, the entire spot metering circle at the center should
cover the gray card.
4. Press the button. (8)
5. Set the flash exposure level.
• Adjust the Speedlite’s manual flash level and the camera
aperture so that the flash exposure level aligns with the
standard exposure index.
6. Take the picture.
• Remove the gray card and take the picture.
If flash exposure compensation has already been set with the Speedlite,
you cannot use the camera’s button or Flash function settings
menu to set flash exposure compensation. If it is set with both the
camera and Speedlite, the Speedlite’s setting overides the camera’s.
If autofocus cannot be achieved, the external, EOS-dedicated
Speedlite’s AF-assist beam (if the Speedlite has it) will be emitted
automatically.
If focus cannot be achieved with the external Speedlite’s AF-assist
beam, select the center AF point. With some external Speedlites,
autofocus with AF-assist beam works only with the center AF point.
This camera is a Type-A camera that can use all the features of EXseries Speedlites.
The flash function’s [E-TTL II] setting will work together with C.Fn II -4
(p.164). And [Flash firing] will work with C.Fn II -6 (p.165).
Only [E-TTL II] and [Flash exp. comp] can be settable for flash function
settings with an EX-series Speedlite not controllable by the camera.
(For some EX-series Speedlites, [Shutter sync.] can also be settable.)

Flash Photography

Using Non-EX-series Canon Speedlites
With an EZ/E/EG/ML/TL-series Speedlite set in the TTL or A-TTL
autoflash mode, the flash can be fired at full output only. Set the
camera’s shooting mode to manual or aperture-priority AE and shoot.
When using a Speedlite which has manual flash mode, shoot in the
manual flash mode.
With an EX-series Speedlite set to TTL autoflash with the flash’s
Custom Function, the flash will fire at full output only.

Using Non-Canon Flash Units
Sync Speed
The camera can synchronize with non-Canon compact flash units at
1/250 sec. and slower speeds. With large studio flash units, since the
flash duration is longer, set the sync speed within 1/30 sec. to 1/125
sec. Be sure to test the flash synchronization before shooting.

PC Terminal
The camera’s PC terminal is provided
for flash units having a sync cord. The
PC terminal is threaded to prevent
inadvertent disconnection.
The camera’s PC terminal has no
polarity. You can connect any sync
cord regardless of its polarity.
If the camera is used with a flash unit or flash accessory dedicated to
another camera brand, the camera may not operate properly and
malfunction may result.
Also, do not connect to the camera’s PC terminal any flash unit requiring
250 V or more.
Do not attach a high-voltage flash unit on the camera’s hot shoe. It might
not work.
A flash unit attached to the camera’s hot shoe and a flash unit connected to
the PC terminal can both be used at the same time.

Live View Shooting
You can shoot while viewing a real-time image on the
camera’s LCD monitor or on a personal computer
screen. This is called “Live View shooting.”

Using a hard disk-type card is not recommended. Use a
memory card.
When you use Live View shooting for a long period, the
camera’s internal temperature may increase and it can degrade
image quality. Terminate Live View shooting when not shooting
images.
For a long exposure, stop Live View shooting temporarily and
wait several minutes before shooting.
If the < > (warning for high temperature in the camera) icon is
displayed, terminate Live View shooting.
With a hard-disk type card in the camera, if Live View shooting
continues while the < > icon is displayed, the Live View might
stop automatically. Live View shooting will be disabled until the
camera’s internal temperature decreases.

Live View Shooting
Instead of looking through the viewfinder, you can look at a real-time
image on the camera’s LCD monitor while shooting. You can also
magnify the real-time image on the LCD monitor by 5x or 10x so you
can focus more precisely. Convenient when the camera is mounted on
a tripod for shooting still lifes, for example.

Preparing for Live View Shooting

Set the lens focus mode switch to
.
During Live View shooting,
autofocusing is not possible.

[Live View function
2 Select
settings].
Under the [6] tab, select [Live View
function settings], then press <0>.

[Live View shoot.].
3 Select
Turn the <5> dial to select [Live
View shoot.], then press <0>.

[Enable].
4 Select
Turn the <5> dial to select [Enable],
then press <0>.
During Live View shooting, do not point the camera toward the sun. The
sun’s heat can damage the camera’s internal components.
If you handhold the camera like a compact digital camera and shoot while
viewing the LCD monitor, camera shake can cause blurred images. For Live
View shooting, mounting the camera on a tripod is recommended.

About Remote Live View Shooting
With the provided software installed in the personal computer, you can connect the camera to
the personal computer and shoot remotely while viewing the computer screen instead of the
camera’s viewfinder. For details, see the Software Instruction Manual in the CD-ROM.

Live View Shooting

Displaying Live View Image on the LCD Monitor
With the camera ready to shoot,
press <0>.
X The Live View image will appear on
the LCD monitor in real-time with
100% field of view.
With the video cable (provided)
connecting the camera to a TV set, you
can view images on the TV. (p.122)
During Live View image display, if you point the camera in a different direction, it
might throw off the correct brightness momentarily and the image might not look
right. Wait until the image stabilizes at the correct brightness before shooting.
If you shoot while the image brightness is not yet stable, the resulting image
might be overexposed or underexposed.
If the light source within the image changes, the screen might flicker. If this
happens, press <0> to end the shooting, then with the new light source in
place, press <0> again to resume shooting.

Setting the Shooting Functions
In the same way as during shooting through the viewfinder, you can set
the shooting functions (shooting mode, drive mode, memory card
selection, image size, ISO speed, Picture Style, white balance,
exposure compensation, AEB, AE lock, flash exposure compensation,
etc.) while looking at the top/rear LCD panel or LCD monitor.
Only the metering mode cannot be changed. Focusing frame-linked
evaluative metering with the image sensor will take effect.
Continuous shooting is possible.
The metering and AE lock activated with the button will remain
active for 16 sec.
To set the white balance, memory card selection, or image size, press
the button and set it with the <5> or <6> dial.
The focus preset feature on super telephoto lenses cannot be used.

Live View Shooting

Magnifying the Image for Manual Focusing

Move the focusing frame to the
position where you want to focus.
Use <9> to select the focusing frame in
full view. If you press <9> at the center,
the focusing frame will return to the center.

the button.
2 Press
X The area within the focusing frame

Magnification: Approx. 10x

will be magnified.
X The shutter speed and aperture
settings will be displayed in orange.
Each time you press the button, the
display format will change as follows:
Full view → Approx. 5x → Approx. 10x

manually.
3 Focus
While looking at the Live View image
AE lock
Magnified area
Magnification

on the LCD monitor, turn the lens’
focusing ring to focus manually.

High temperatures, high ISO speeds, or long exposures may cause noise or
irregular colors in the captured image shot with Live View shooting.
During continuous shooting, the exposure set for the first shot will also
be applied to subsequent shots. If you recompose during continuous
shooting, the exposure might not match the latter shots.
If the camera is not operated for a prolonged period, the power will turn
off automatically as set with [5 Auto power off]. (p.47)
While the image is magnified, pressing the button will not renew the exposure setting.
During the 5x or 10x magnified view, the image sharpness may be applied to a
higher degree than what was set. This is to make it easier to focus manually.

Live View Shooting

Taking the Picture

Check the composition.
Press the to check the image
composition in full view.

2 Check the display.
the picture.
3 TakePress
the shutter button completely.
X The picture will be taken and the captured
image is displayed on the LCD monitor.
X After the image review ends, the
camera will return to Live View
shooting automatically.
To terminate shooting, press <0>
while Live View image is displayed.
To check the exposure simulation and depth of field, press the depth-offield preview button.
Flash photography is also possible. However, FE lock, modeling flash,
and test firing are not possible. The Speedlite’s Custom Functions also
cannot be set with the Speedlite.
With the 580EX II, the wireless setting cannot be changed.
Under low light or bright light conditions, the Live View image might not
display the proper brightness. And if you press the depth-of-field preview
button, the image might not show the brightness corresponding to the
exposure setting (<
> icon blinks). However, the captured image will
reflect the exposure setting.
If there is a very bright light source in the picture, such as the sun, the
bright area might be covered in black on the LCD monitor. However, the
actual captured image will correctly show the bright area.
The time it takes to actually take the picture after you press the shutter
button completely is slightly longer than with shooting through the
viewfinder.
When you press the shutter button completely, the shutter will make two
shutter-release sounds (with flash, the reflex mirror and shutter operation
make multiple sounds). However, only one shot is taken.

Live View Shooting

About the Information Display
Each time you press the button, the information display will change.
Histogram
(Brightness/RGB)

Live View exposure
simulation

Picture Style
AE lock

Flash-ready
Shutter speed
Aperture

Shots remaining
Flash exposure level

When the [6 Live View function settings] menu’s [Grid display] is set to
[On], a grid will appear to make it easier to align the horizontal or vertical shot.
By setting C.Fn IV -14 [Add aspect ratio information], you can shoot with the same
framing as with a medium- for large-format film camera such as 6x6cm, 6x4.5cm, and
4x5 inch. Vertical lines matching the set aspect ratio will be displayed. (p.178)
When C.Fn IV -16 [Live View exposure simulation] is set to
[1:Enable(simulates exposure)], the Live View image will be displayed
with the brightness level simulating the exposure setting. This enables
you to see how the exposure looks before taking the picture. (p.178)
The histogram (p.118) will be displayed only when C.Fn IV -16-1 has been
set. If flash is used or bulb is set, the histogram will be grayed out. The
histogram might not be properly displayed in low light or bright light conditions.
When you press the depth-of-field preview button or set C.Fn IV -16-1, the
<
> icon will appear to indicate that exposure simulation is in effect.
During Live View shooting, if the < > warning icon (temperature
increase warning) is displayed, see page 109.

Possible Shots During Live View Shooting
Temperature
Possible Shots

At 23°C / 73°F
Approx. 300

At 0°C / 32°F
Approx. 230

* The figures above are based on a fully-charged LP-E4 battery and CIPA
(Camera & Imaging Products Association) testing standards.

Image Playback
Learn how to view or erase images, and copy images
between the CF card and SD card.

For images taken with another camera:
The camera might not be able to properly display images captured
with a different camera or edited with a personal computer or whose
file name was changed.

x Image Playback
Single image display

Playback the image.
Press the button.
X The last captured image or last image
viewed will appear.

the image.
2 Select
To playback images starting with the
last image, turn the <5> dial
counterclockwise. To playback
images starting with the first captured
image, turn the dial clockwise.
Press the button to change
the display format.

Single image display

Histogram display

Single image display + Image size

Shooting information display

the image playback.
3 ExitPress
the button to exit the
image playback and return the
camera to shooting ready.

x Image Playback

Shooting Information Display
Single image display + Image size
Protect
Exposure compensation amount
Aperture

Sound recording
Folder number - File number
Memory card

Image-recording
quality
Playback image
number/
Total images recorded

Shooting Information Display
Flash exposure compensation
amount
White balance correction

Picture Style
AF microadjustment

Histogram
(Brightness/RGB)

Shooting mode
Color temperature
if
is set

ISO speed
Picture Style settings

Image-recording
quality
Playback image
number/
Total images recorded
White balance

Color space
Date and time
Original decision (image
verification) data appended
File size

When you shoot in the RAW+JPEG or sRAW+JPEG mode, the JPEG
image file size will be displayed.

x Image Playback

About the Highlight Alert
When the [4 Highlight alert] menu is set to [Enable], overexposed
highlight areas will blink. To obtain more image detail in the overexposed areas,
set the exposure compensation to a negative amount and shoot again.
About the AF Point Display
When the [4 AF point disp.] menu is set to [Enable], the AF point
which achieved focus will be displayed in red in the shooting
information display and histogram display. If automatic AF point
selection was used, multiple AF points might be displayed in red.
About the Histogram
The brightness histogram display shows the exposure level
distribution, overall brightness, and gradation. And the RGB histogram
display is for checking the color saturation and gradation. The display
can be switched with the [4 Histogram] menu.
[Brightness] Display
This histogram is a graph showing the distribution of the image’s
brightness level. The horizontal axis indicates the brightness level
(darker on the left and brighter on the right), while the vertical axis
indicates how many pixels exist for each brightness level. The
more pixels there are toward the left, the darker the image. And the
more pixels there are toward the right, the brighter the image. If
there are too many pixels on the left, the shadow detail will be lost.
And if there are too many pixels on the right, the highlight detail will
be lost. The gradation in-between will be reproduced. By checking
the image and its brightness histogram, you can see the exposure
level inclination and the overall tone reproduction condition.

Sample Histograms

This histogram is a graph showing the distribution of the image’s brightness level of each
primary color (RGB or red, blue, and green). The horizontal axis indicates the color’s
brightness level (darker on the left and brighter on the right), while the vertical axis indicates
how many pixels exist for each color brightness level. The more pixels there are toward the
left, the darker and less prominent the color. And the more pixels there are toward the right,
the brighter and denser the color. If there are too many pixels on the left, the respective
color information will be lacking. And if there are too many pixels on the right, the color will
be too saturated with no detail. By checking the image’s RGB histogram, you can see the
color’s saturation and gradation condition and white balance inclination.

x Image Playback

Turn on the index display.
During image playback, press the
button.
X The 4-image index display will
appear. The currently-selected image
will be highlighted in a blue frame.
Press the button again to switch
to the 9-image index display.

an image.
2 Select
Turn the <5> dial to move the blue
frame.
To display an image, press the
button.

Jump Display
With the single image display, index display, and magnified view, you
can turn the <6> dial to jump through the images.

Browsing Through Images
With the [4 Image jump w/6] menu’s [1 image/10 images/100
images/Screen/Date/Folder] option, you can set the desired jump method.
With the index display, you can jump by a single screen by selecting [1
image]. If you want to jump by date, select [Date]. To jump by folder,
select [Folder].

Jump method
Image location

During image playback, turn the
<6> dial.
X The jump display will proceed
according to the selected jump
method.
X On the bottom right, the jump method
and current image location are
indicated.

x Image Playback

u/y Magnified View
You can magnify the image by 1.5x to 10x on the LCD monitor.

1
Magnified area

Magnify the image.
During image playback, press the
button.
X The image will be magnified.
To increase the magnification, hold
down the button. The image will
continue to be magnified until it
reaches the maximum magnification.
To reduce the magnification, press
the button. If you hold down the
button, the image will continue to
reduce to the single image display.

around the image.
2 Scroll
Use <9> to scroll around the
magnified image.
To exit the magnified display, press
the button and the single
image display will return.

Magnified View’s Starting Position
Normally, the magnified view starts at the image center. When the [4 Enlarge
display] menu is set to [Enlarge from selected AF point], the magnified
view starts at the selected AF point. This is convenient for quickly checking the focus.
During the magnified view, you can turn the <5> or <6> dial to view another image at the
same magnification and position (the display jumps according to the selected jump method).
In the case of images shot with automatic AF point selection or with
manual focus , the magnification will start at the image center.
Magnified view is not possible during the image review immediately after the image is taken.
With [Enlarge from selected AF point]:
• The starting magnification varies depending on the image size that was set.
• When C.Fn III -8-1/2 is set, the focusing point area will be expanded so the AF point
which actually achieved focus might not fall within the initial magnified view screen.

x Image Playback

b Rotating an Image
You can rotate the image to the desired orientation.

Select [Rotate].
Under the [3] tab, select [Rotate],
then press <0>.

the image.
2 Select
Turn the <5> dial to select the
image to be rotated.
You can also select an image on the
index display.

the image.
3 Rotate
Each time you press <0>, the image
will rotate clockwise as follows:
90° → 270° → 0°
To rotate other images, repeat steps 2
and 3.
To exit the image rotate and return to
the menu screen, press the
button.

If you have set [5 Auto rotate] to [OnzD] (p.130) before taking the
vertical shots, you need not rotate the image as described above.
If the rotated image is not displayed in the rotated orientation during
image playback, set the [5 Auto rotate] menu to [OnzD].

x Image Playback

Viewing the Images on TV
By connecting the camera to a TV set with the video cable (provided),
you can view the captured images on a TV set. Turn off the camera and
the television before connecting them.

Connect the camera to the TV.
Open the camera’s terminal cover.
Use the video cable (provided) to
connect the camera’s video
OUT terminal to the TV monitor’s
VIDEO IN terminal.
Insert the video cable plugs firmly all
the way.

on the TV and switch the
2 Turn
TV’s line input to VIDEO IN.
the camera’s power switch to
3 Set
<1>.
the button.
4 Press
X The image will appear on the TV
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
After you finish, set the camera’s
power switch to <2>, turn off the
TV, then disconnect the video cable.

If the video system format does not match the TV’s, the image will not be
displayed properly. Set the proper video system format with [6 Video
system].
Do not use any video cable other than the one provided. Images might
not be displayed if you use a different video cable.
Depending on the TV monitor, part of the image might be cut off.

J Protecting Images
Protecting the image prevents it from being erased accidentally.

Protecting a Single Image
the image to be
1 Playback
protected.
the image.
2 Protect
During image playback, press the
button.
X When an image is protected, the
icon will appear above the
image.
To cancel the image protection, press
the button again. The
icon will disappear.
To protect another image, repeat
steps 1 and 2.
To exit the image protection, press
the button. The menu will
reappear.

3 Protecting All Images in a Folder or Card
You can protect all the images in the folder or memory card at one time.
When the [3 Protect images] menu is set to [All images in folder] or
[All images on card], all the images in the folder or card will be
protected.
To cancel the image protection, select [Clear all images in folder] or
[Clear all images on card].
When you format the memory card, the protected images will also
be erased.
To protect the image, press and let go of the button. Hold down
the button for about 2 sec. and the sound recording will start.

J Protecting Images

Images can also be protected individually when the [3 Protect images]
menu is set to [Select images]. Press <0> to protect or unprotect the
image.
Once an image is protected, it cannot be erased by the camera’s erase
function. To erase a protected image, you must first cancel the protection.
If you erase all the images (p.128), only the protected images will remain.
This is convenient when you want to erase unnecessary images all at once.

K Sound Recording
You can add a sound clip to an image. The sound clip will be saved as a
sound file (WAV format) having the same file number as the image. The
sound can be played back with the provided software.

the image to which you
1 Playback
want to add the sound clip.
the sound.
2 Record
While the image is displayed, press

the button for about 2 sec.
When [Sound recording] appears,
keep pressing the button and speak
into the built-in microphone. The
maximum recording time for a sound
clip is 30 sec.
To end the sound clip, let go of the
button.
X The sound will be recorded, and the
< > icon will appear on the screen.

The camera cannot playback the sound clip.
Sound recording is not possible with a protected image.
To record a sound clip longer than 30 sec., repeat step 2.
You can also record sound once, right after image capture during the
image review by following step 2.

a Copying Images
The images in a memory card can be copied to the other memory card.

3 Copying Individual Images

Select [Image copy].
Under the [3] tab, select [Image
copy], then press <0>.

[Sel.Image].
2 Select
Turn the <5> dial to select
[Sel.Image], then press <0>.

Lowest file number
Quantity of images in folder

the folder.
3 Select
Turn the <5> dial to select the folder
containing the image to be copied,
then press <0>.
Refer to the images on the right to
help you select the folder you want.
X The images in the selected folder will
be displayed.

Folder name
Highest file number

a Copying Images

Total images selected

the image.
4 Select
Turn the <5> dial to select the
image to be copied, then press <0>.
X The icon will appear on the
upper left of the screen.
Press the button to display the
three-image view. To return to the singleimage display, press the button.
To select another image to be copied,
repeat step 4.

the button.
5 Press
After selecting all the images to be
copied, press the button.

[OK].
6 Select
Check the target memory card and
press <0>.

the target folder.
7 Select
Turn the <5> dial to select the target
folder where the images are to be
copied to, then press <0>.
To create a new folder, select [Create
folder].

[OK].
8 Select
Check the copy source and copy
target’s information.
Turn the <5> dial to select [OK],
then press <0>.

a Copying Images

X The copying will start and the
progress will be displayed.
When the copying is completed, the
result will be displayed. Select [OK] to
return to the screen in step 2.

3 Copying All Images in a Folder
In step 2, select [Sel.n]. Select the source folder to be copied, then
the target folder.

3 Copying All Images in a Memory Card
In step 2, select [All image]. All the folders and images in the source
memory card will be copied to the target card. (The folder numbers and
file names will remain the same in the target folder.)
The copy source is the memory card selected by the [5 Record
func+media/folder sel.] menu’s [Record/play] ([Playback]) option.
The file name of the copied image will be the same as the source image’s file name.
If [Sel.Image] has been set, you cannot checkmark images in
multiple folders at one time and copy them. Select images in each folder
to copy them folder by folder.
If an image is being copied to a target folder having the same folder number as the
source folder and the target folder already has an image with the same file number,
the following will be displayed: [Skip image and continue] [Replace existing
image] [Cancel copy]. Select the copying method, then press <0>.
• [Skip image and continue]: Any images in the target folder having the
same file number as the source images will be skipped and not copied.
• [Replace existing image]: Any images in the target folder having the same
file number as the source images (including protected images) will be overwritten.
If an image with a print order (p.147) or transfer order (p.154) is overwritten,
you will have to set the print order or transfer order again.
The image’s print order or transfer order information will not be retained
when the image is copied.
Shooting is not possible during the copying operation. Select [Cancel]
before trying to shoot.

L Erasing Images
You can either select and erase images one by one or erase them in
one batch. Protected images (p.123) will not be erased.
Once an image is erased, it cannot be recovered. Make sure
you no longer need the image before erasing it. To prevent
important images from being erased accidentally, protect
them.

Erasing a Single Image

1 Playback the image to be erased.
the button.
2 Press
The erase menu will appear at the
bottom of the screen.

the image.
3 Erase
X Select [Erase], then press <0>. The
image displayed will be erased.

3 Checkmarking Images to be Erased in a Batch
By checkmarking the images to be erased, you can erase multiple
images at one time. On the [3 Erase images] menu, select [Select
and erase images]. With <0>, checkmark the images to be
erased. Then press the button.

3 Erasing All Images in a Folder or Card
You can erase all the images in a folder or card at one time. When the
[3 Erase images] menu is set to [All images in folder] or [All images
on card], all the images in the folder or card will be erased.

Changing Image Playback Settings
3 Setting the LCD Monitor Brightness
You can adjust the brightness of the LCD monitor to make it easier to
read.

Select [LCD brightness].
Under the [6] tab, select [LCD
brightness], then press <0>.

the brightness.
2 Adjust
While referring to the gray chart, turn
the <5> dial, then press <0>.

To check the image’s exposure, you should look at the histogram (p.118).

3 Setting the Image Review Time
How long the image is displayed on the LCD monitor immediately after
capture can be set. To keep the image displayed, set [Hold]. To not
have the image displayed, set [Off].

Select [Review time].
Under the [2] tab, select [Review
time], then press <0>.

the desired review time.
2 SetTurn
the <5> dial to select the time,
then press <0>.

If [Hold] is set, the image will be displayed until the auto power off time
elapses.

Changing Image Playback Settings

3 Auto Rotate of Vertical Images
Vertical images are rotated automatically
so they are displayed vertically on the
camera’s LCD monitor and personal
computer instead of horizontally. The
setting of this feature can be changed.

Select [Auto rotate].
Under the [5] tab, select [Auto
rotate], then press <0>.

the auto rotate display.
2 SetTurn
the <5> dial to select the
setting, then press <0>.
[OnzD]
The vertical image is automatically rotated on both the camera’s LCD
monitor and on the personal computer.
[OnD]
The vertical image is automatically rotated only on the personal
computer.
[Off]
The vertical image is not rotated.
Auto rotate will not work with vertical images captured while Auto rotate was
[Off]. They will not rotate even if you later switch it to [On] for playback.
The vertical image will not be automatically rotated for the image review
immediately after image capture.
If the vertical image is taken while the camera is pointed up or down, the
image might not rotate automatically for playback.
If the vertical image is not automatically rotated on the personal
computer screen, it means the software you are using is unable to rotate
the image. Using the provided software is recommended.

Sensor Cleaning
The camera has a Self Cleaning Sensor Unit attached
to the sensor’s front layer (low-pass filter) to shake off
dust automatically.
The Dust Delete Data can also be appended to the
image so that any remaining dust spots can be removed
automatically by the Digital Photo Professional
(provided software).

Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to
attach the body cap to the camera.
Remove dust on the body cap before attaching it.
Even while the Self Cleaning Sensor Unit is operating, you can
press the shutter button halfway to interrupt the cleaning and start
shooting immediately.

3 Automatic Sensor Cleaning
Whenever you set the power switch to <1/J> or <2>, the Self Cleaning
Sensor Unit operates (approx. 3.5 sec.) to automatically shake off any dust on
the front of the sensor. Normally, you need not be aware of this operation.
However, you can execute the sensor cleaning at anytime as well as disable it.

Cleaning the Sensor Now

Select [Sensor cleaning].
Under the [7] tab, select [Sensor
cleaning], then press <0>.

[Clean nowf].
2 Select
Turn the <5> dial to select [Clean
nowf], then press <0>.

[OK].
3 Select
Turn the <5> dial to select [OK],
then press <0>.
X During the sensor cleaning, the
icon will be displayed on the
LCD monitor. When the cleaning
ends, the screen will return to step 2.
The user-executed cleaning takes about 4 sec. to complete. During the
sensor cleaning, the shutter will make 3 shutter-release sounds. The
camera is not taking pictures.
For best results, do the sensor cleaning while the camera bottom is
placed on a table or other surface at a perpendicular angle.
Even if you repeat the sensor cleaning multiple times, the result will not
improve that much. Right after the sensor cleaning is finished, the
[Cleaning nowf] option will remain disabled temporarily.

Disabling Automatic Sensor Cleaning
In step 2, select [Auto cleaningf] and set it to [Disable].
X Whenever you set the power switch to <1/J> or <2>, the
sensor cleaning will not be executed.

3 Appending Dust Delete Data
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
visible on captured images. However, in case visible dust still remains,
you can append the Dust Delete Data to the image to later erase the
dust spots. The Dust Delete Data is used by the Digital Photo
Professional (provided software) to erase the dust spots automatically.

Preparation
Get a solid-white object (paper, etc.).
Set the lens focal length to 50mm or longer.
Set the lens focus mode switch to and set the focus to infinity
(∞). If the lens has no distance scale, look at the front of the lens
and turn the focusing ring clockwise all the way.

Obtain the Dust Delete Data

Select [Dust Delete Data].
Under the [2] tab, select [Dust
Delete Data], then press <0>.

[OK].
2 Select
Turn the <5> dial to select [OK],
then press <0>. After the automatic
sensor cleaning ends, a message will
appear.

3 Appending Dust Delete Data

a solid-white object.
3 Photograph
At a distance of 20 - 30 cm / 0.7 - 1.0
feet, fill the viewfinder with a
patternless, solid-white object and
take a picture.
X The picture will be taken in the
aperture-priority AE mode with an
aperture of f/22.
Since the image will not be saved, the
data can still be obtained even if there
is no memory card in the camera.
X When the picture is taken, the data
will be obtained. When the data is
obtained, a message will appear.
Select [OK], and the menu will
reappear.
If the data was not obtained
successfully, a message to that effect
will appear. Follow the “Preparation”
procedure on the preceding page, then
select [OK]. Take the picture again.

About the Dust Delete Data
After the Dust Delete Data is obtained, it is appended to all the JPEG,
RAW, and sRAW images captured thereafter. Before an important
shoot, you should update the Dust Delete Data by obtaining it again.
For erasing dust spots automatically with the bundled software, see the
Software Instruction Manual in the CD-ROM.
The Dust Delete Data appended to the image is so small that it hardly
affects the image file size.
Be sure to use a solid-white object such as a white piece of paper. If the
paper has any pattern or design, it may be recognized as dust data and
affect the accuracy of the dust deletion with the software.

3 Manual Sensor Cleaning
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.

Select [Sensor cleaning].
Under the [7] tab, select [Sensor
cleaning], then press <0>.

[Clean manually].
2 Select
Turn the <5> dial to select [Clean
manually], then press <0>.

[OK].
3 Select
Turn the <5> dial to select [OK],
then press <0>.
X In a moment, the mirror will lockup
and the shutter will open.
“CLn” will blink on the top LCD panel.

4 EndSetthethecleaning.
power switch to <2>.
For the power source, using the AC Adapter Kit ACK-E4 is
recommended.
If you use a battery, make sure it is fully recharged.

3 Manual Sensor Cleaning

While cleaning the sensor, never do any of the following. If the
power is cut off, the shutter will close and the shutter curtains and
image sensor might get damaged.
• Set the power switch to <2>.
• Remove/insert the battery.
The surface of the image sensor is extremely delicate. Clean the sensor
with care.
Use a plain blower without any brush attached. A brush can scratch the
sensor.
Do not insert the blower tip inside the camera beyond the lens mount. If
the power is turned off, the shutter will close and the shutter curtains or
reflex mirror might get damaged.
Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.

Direct Printing from the Camera/
Digital Print Order Format
You can connect the camera directly to a printer and
print out the images in the memory card.
The camera is compatible with “wPictBridge” which is
the standard for direct printing.
You can also specify any images in the memory card to
be printed. (p.147)
About DPOF
DPOF (Digital Print Order Format) is a standard for recording printing
instructions (image selections, quantity to print, etc.) in the memory
card. In this way, you can print multiple pictures in one batch or give the
print order to a photofinisher.

Canon’s PictBridge Web Site
The Web site below gives more information on using your
Canon camera with various printers, such as which paper
types to use.
http://canon.com/pictbridge/

Preparing to Print
You do the direct printing procedure entirely with your camera
while you look at the LCD monitor.

Connecting the Camera to a Printer

Set the camera’s power switch to
<2>.

the printer.
2 SetForupdetails,
see the printer’s
instruction manual.

the camera to the
3 Connect
printer.
Use the interface cable that came
with the camera.
When connecting the cable plug to
the camera’s terminal, the
cable plug’s icon must face the
front side of the camera.
To connect to the printer, refer to the
printer’s instruction manual.

4 Turn on the printer.
the camera’s power switch to
5 Set
<1>.
X Some printers may make a beeping
sound.

Preparing to Print

the image.
6 Playback
Press the button.
X The image will appear, and the
icon will appear on the upper left to
indicate that the camera is connected
to a printer.

The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
When connecting the camera to the printer, do not use any cable other
than the interface cable provided.
If there is a long beeping sound in step 5, it indicates a problem with the
PictBridge printer. To find out what’s wrong, do the following:
Press the button to playback the image and follow the steps
below.
1. Press <0>.
2. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor (p.146).
If you use a battery to power the camera, make sure it is fully charged.
With a fully charged battery, printing up to about 7 hours is possible.
Before disconnecting the cable, turn off the camera and printer first. Pull
out the cable while holding the plug, not the cord.
For direct printing, using AC Adapter Kit ACK-E4 to power the camera is
recommended.

wPrinting
The screen display and setting options will differ depending on the
printer. Some settings might not be available. For details, see the
printer’s instruction manual.
Printer-connected icon

Select the image to be printed.
Check that the icon is
displayed on the upper left of the LCD
monitor.
Turn the <5> dial to select the
image to be printed.

<0>.
2 Press
X The print setting screen will appear.
Print setting screen

Sets the printing effects.
Sets the date or file number imprinting to on
or off.
Sets the quantity to be printed.
Sets the trimming area.
Sets the paper size, type, and layout.
Returns to step 1.
Starts the printing.

The paper size, type, and layout you have set will be displayed.
* Depending on the type of printer, the date and file number imprinting,
trimming, and other settings might not be available.

[Paper settings].
3 Select
Turn the <5> dial to select [Paper
settings], then press <0>.
X The paper settings screen will
appear.

QSetting the Paper Size
Turn the <5> dial to select the size
of the paper loaded in the printer,
then press <0>.
X The paper type screen will appear.

YSetting the Paper Type
Turn the <5> dial to select the type of the
paper loaded in the printer, then press <0>.
When using a Canon printer and Canon
paper, read the printer’s instruction manual
to check what paper types can be used.
X The page layout screen will appear.

USetting the Page Layout
Turn the <5> dial to select the page
layout, then press <0>.
X The print setting screen will reappear.
Bordered
Borderless
Borderedc
xx-up

The print will have a white border along the edges.
The print will have no white borders. If your printer cannot print
borderless prints, the print will have borders.
The shooting information* will be imprinted on the border on
9x13cm and larger prints.
Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.
On A4 / Letter size paper, 20 or 35 thumbnails of the images
ordered through DPOF will be printed.
• [20-upc] will have the shooting information* printed on the side of each thumbnail
and the file number and date** printed on the bottom of each thumbnail image.
• [35-upp] will have the file number and date** printed on the
bottom of the thumbnail images.
The page layout will vary depending on the printer type or its settings.

* From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture,
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
** This depends on the date/file number imprinting option set in step 5 (p.143).

effects.
4 SetSettheasprinting
necessary. If you need not set
any printing effects, go to step 5.
Turn the <5> dial to select the item
on the upper right, then press <0>.
If the icon is displayed next to
, the printing effects can also
be adjusted. (p.144)
Next, turn the <5> dial to select the
desired printing effect, then press <0>.
Item

Same as the printing characteristics turned “On”. No automatic
correction will be performed.

The image will be printed according to the printer’s standard colors.
The image’s Exif data is used to make automatic corrections.

The image will be printed with higher saturation to produce
more vivid blues and greens.

The image noise is reduced before printing.

Prints in black-and-white with true blacks.

0 Cool tone Prints in black-and-white with cool, bluish blacks.
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
zNatural

Prints the image in the actual colors and contrast. No automatic
color adjustments will be applied.

The printing characteristics are the same as the “Natural” setting. However,
this setting enables finer printing adjustments than with “Natural.”

The printing will differ depending on the printer. For details, see
the printer’s instruction manual.

* The screen display may differ depending on the printer.
* When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation.

the date and file number
5 Set
imprinting.
Set as necessary.
Turn the <5> dial to select ,
then press <0>.
Turn the <5> dial to select the
desired setting, then press <0>.

of copies.
6 SetSettheasnumber
necessary.
Turn the <5> dial to select ,
then press <0>.
Turn the <5> dial to select the
number of copies, then press <0>.

7 StartTurnprinting.
the <5> dial to select [Print],
then press <0>.
X The printing will start.

You can also print RAW and sRAW images taken by the camera.
With RAW+JPEG images, the RAW image will be printed. And with
sRAW+JPEG images, the JPEG image will be printed.
For details on trimming, see page 145.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and recording quality, it may take
some time for the printing to start after you select [Print].
If image tilt correction (p.145) has been applied, it will take longer to print
the image.
After the [Do not disconnect cable] message disappears, you can
disconnect the cable even during printing.
To stop the printing, press <0> while [Stop] is displayed, then select [OK].

e Adjustment of Printing Effects
In step 4 on page 142, select the printing
effect. When the icon is displayed
next to , press the
button. You can then adjust the printing
effect. What can be adjusted or what is
displayed will depend on the selection
made in step 4.
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can
change the histogram’s distribution and
adjust the image’s brightness and contrast.
With the adjust levels screen displayed,
press the button to change the
position of the . Turn the <5> dial
to freely adjust the shadow level (0 - 127)
or highlight level (128 - 255).
kBrightener
Effective in backlit conditions which can make the subject’s face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
The [kBrightener] and [Red-eye corr.] effects will not show up on the
screen.
When [Detail set.] is selected, you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use <9>. B is for blue, A is amber, M is magenta, and G is
green. The color will shift in the respective direction.
When you select [Clear all], all the printing effect settings will be reverted
to the default.

Trimming the Image
Tilt correction

You can crop the image and print only
the trimmed portion as if the image was
recomposed. Do the trimming right
before printing. If you set the trimming
and then set the print settings, you may
have to set the trimming again.

1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and proportion.
The image area within the trimming frame will be printed. The
trimming frame’s vertical-to-horizontal proportion can be changed
with [Paper settings].
Changing the trimming frame size
When you press the or button, the size of the trimming
frame will change. The smaller the trimming frame, the larger the
image magnification will be for the printing.
Moving the trimming frame
Use <9> to move the frame over the image vertically or horizontally. Move
the trimming frame until it shows the desired image area or composition.
Rotating the frame
Each time you press the button, the trimming frame will
toggle between the vertical and horizontal orientations. This enables
you to create a vertical-oriented print from a horizontal image.
Image tilt correction
By turning the <5> dial, you can adjust the angle of the image
rotation by ±10 degrees in 0.5-degree increments. When you do
image tilt correction, the < > icon on the screen will turn blue.

3 Press <0> to exit the trimming.
X The print setting screen will reappear.
You can check the trimmed image area on the upper left of the print setting screen.

Depending on the printer, the trimmed image area might not be printed
as you specified.
The smaller you make the trimming frame, the grainier the picture will
look on the print.
While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.

Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details, see the printer’s instruction manual.

Error Messages
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Press <0> to stop printing. After resolving the
problem, resume printing. For details on how to resolve a printing problem,
refer to the printer’s instruction manual.
Paper error:
Check whether the paper is properly loaded in the printer.
Ink error:
Check the printer’s ink level, and check the waste ink tank.
Hardware error:
Check for any printer problems other than paper and ink problems.
File error:
The selected image cannot be printed via PictBridge. Images taken with a
different camera or images edited with a computer might not be printable.

W Digital Print Order Format (DPOF)
Set the print type, date imprinting, and file No. imprinting. The print
settings will be applied to all print-ordered images. (They cannot be set
individually for each image.)

Set the Printing Options

Select [Print order].
X Under the [3] tab, select [Print
order], then press <0>.

[Set up].
2 Select
Turn the <5> dial to select [Set up],
then press <0>.

as desired.
3 SetSetthetheoptions
[Print type], [Date], and [File
No.].
Turn the <5> dial to select the
option, then press <0>.
Turn the <5> dial to select the
desired setting, then press <0>.
[Print type]

W Digital Print Order Format (DPOF)

Prints one image on one sheet.

Multiple, thumbnail images are printed on
one sheet.

Prints both the standard and index prints.

[On] imprints the recorded date on the print.
[On] imprints the file No. on the print.

Exit the menu.
Press the <7> button.
X The Print order screen will reappear.
Next, select [Sel.Image], [Byn], or
[All image] to order the images to be
printed.

Even if [Date] and [File No.] are set to [On], the date or file No. might not
be imprinted depending on the print type setting and printer model.
When printing with DPOF, you must use the memory card whose print
order specifications have been set. It will not work if you just extract
images from the memory card and try to print them.
Certain DPOF-compatible printers and photofinishers might not be able
to print the photos as you specified. If this happens with your printer,
refer to the printer’s instruction manual. Or check with your photofinisher
about compatibility when ordering prints.
Do not insert into the camera a memory card whose print order was set
by a different camera and then try to specify a print order. The print order
may not work or may be overwritten. Also, depending on the image type,
the print order may not be possible.
RAW and sRAW images cannot be selected for print orders.
With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time.

W Digital Print Order Format (DPOF)

Print Ordering
Sel.Image
Select and order images one by one.
Press the button to display the
three-image view. To return to the singleimage display, press the button.
After completing the print order, press
the button to save the print
order to the memory card.

Total images
selected

Check mark
Index icon

[Standard] [Both]
Press <0> and a print order for 1 copy
of the displayed image will be placed.
Then turn the <5> dial to set the
number of copies (up to 99) to be printed
for that image.
[Index]
Press <0>, and the displayed image will
be included in the index print. The
icon will also appear on the upper left.

Byn
Select Mark all and select the folder. A print order for 1 copy of all
the images in the folder will be placed. If you select Clear all and a
folder, the print order for all the images in the folder will be canceled.
All image
If you select Mark all, a print order for 1 copy of all the images in the
memory card will be placed. If you select Clear all, the print order for
all the images in the card will be canceled.
Note that RAW and sRAW images will not be included in the print order
even when you set “All image.”
When using a PictBridge printer, print no more than 400 images for one
print order. If you specify more than this, all the images might not be
printed.

W Direct Printing with DPOF
With a PictBridge printer, you can easily
print images with DPOF.

Preparing to print.
See page 138.
Follow the “Connecting the Camera to a Printer” procedure up to step 5.

2 Under the [3] tab, select [Print order].
3 Select [Print].
[Print] will be displayed only if the camera is connected to the
printer and printing is possible.

4 Set the [Paper settings]. (p.140)
Set the printing effects (p.142) as necessary.

5 Select [OK].
Before printing, be sure to set the paper size.
Certain printers cannot imprint the file No.
If [Bordered] is set, the date might be imprinted on the border,
depending on the printer.
Depending on the printer, the date might look light if it is imprinted on a
bright background or on the border.
Under [Adjust levels], [Manual] cannot be selected.
If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any of the following occurs:
• Before resuming, you changed the print order or erased any images
selected for the print order. For index printing, you changed the paper
settings before resuming the printing. Or the memory card’s remaining
space was small when the printing was stopped.
If a problem occurs during printing, see page 146.

Transferring Images to
a Personal Computer
You can use the camera to select images in the memory
card and transfer them directly to a personal computer.
If the computer software
(EOS DIGITAL Solution Disk
CD-ROM) provided with the
camera has been installed in
your personal computer, you
can easily transfer the
images without operating the
personal computer.

For instructions to install the provided software, see the separate
sheet, CD-ROM Guide.
If you want to operate the personal computer to transfer the
images from the camera, see the Software Instruction Manual in
the CD-ROM.

d Transferring Images to a Personal Computer
Before connecting the camera to the personal computer, be sure
to first install the EOS DIGITAL Solution Disk software (in the
CD-ROM provided with the camera) in the personal computer.

Preparation for Image Transfer

Connect the camera to the
personal computer.
Set the camera’s power switch to
<2>.
Use the interface cable that came
with the camera.
When connecting the cable plug to
the camera’s terminal, the
cable plug’s icon must face the
front side of the camera.
To the personal computer’s USB port,
connect the plug on other end of the cable.

the camera’s power switch to
2 Set
<1>.
When the program selection screen
appears on the personal computer,
select [EOS Utility].
When the camera model selection screen
appears, select your camera’s model.
X The [EOS Utility] screen will appear on
the computer, and the direct transfer screen
will appear on the camera’s LCD monitor.
Shooting will be disabled while the direct transfer screen is displayed.
If the [EOS Utility] screen does not appear, see Software Instruction
Manual in the CD-ROM.
Before disconnecting the cable, turn off the camera first and pull out the
cable by grasping the plug (instead of the cord).

d Transferring Images to a Personal Computer

Transferring Images to a Personal Computer
The images transferred to the personal
computer will be organized according to
the shooting date and saved in the [My
Pictures] folder for Windows or the
[Pictures] folder in the Macintosh.

All images
All the images in the memory card will be transferred.
New images
Images which have not yet been transferred to the personal
computer will be selected by the camera automatically and
transferred.
Transfer order images
You select the images and they are transferred to the personal
computer in a batch. (p.154)
Select & transfer
You select the images individually to be
transferred. Press <0> and the
displayed image will be transferred.
To exit, press the button.

Wallpaper
Select an image and press <0>. The displayed image will then be
transferred and appear as wallpaper on the computer’s desktop
screen.
To exit, press the button.

During the image transfer, do not disconnect the interface cable.
RAW and sRAW images cannot be transferred as wallpaper.

d Transferring Images to a Personal Computer

3 Selecting the Images to be Transferred
Under the [3] tab, you can use [Transfer
order] to select the images to be
transferred to a personal computer.
When you select [Transfer order images]
on the preceding page, you can transfer the
images set by the transfer order.
Sel.Image
Select and order images one by one.
Press <0> to include the displayed
image in the transfer order. The
icon will also appear on the upper left.
After completing the transfer order, press
the button to save the transfer
order to the memory card.
Byn
Select Mark all and select the folder. All the images in the folder will then
be included in the transfer order. If you select Clear all and a folder, the
transfer order for all the images in the folder will be canceled.
All image
When you select Mark all, all the images in the memory card will be
included in the transfer order. If you select Clear all, the transfer
order for all the images in the card will be canceled.
Do not put into the camera any images whose transfer order was set by a
different camera and then try to specify another transfer order. The images
in the transfer order might all be overwritten. Also, depending on the image
type, the transfer order may not be possible.
For the transfer order, if you select an image captured in the RAW+JPEG or
sRAW+JPEG, it will be counted as one image. During the direct image transfer, both
the RAW/sRAW and JPEG images will be transferred to the personal computer.
If you want to transfer more than 999 images in one batch, select [All
image] on the direct transfer screen.

Customizing the Camera and
Saving Camera Settings
To suit your shooting preferences, you can change the
camera’s functions and also save the camera settings
to a memory card. The saved settings can also be
registered to the camera.

3 Setting Custom Functions

Select [8].
Turn the <6> dial to select the [8]
tab.

the group.
2 Select
Turn the <5> dial to select C.Fn I IV, then press <0>.
Custom Function No.

Select the Custom Function No.

Change the setting as desired.

Turn the <5> dial to select the
Custom Function No., then press
<0>.

Turn the <5> dial to select the
setting (number), then press <0>.
Repeat steps 2 to 4 if you want to set
other Custom Functions.
At the bottom of the screen, the
current Custom Function settings are
indicated below the respective
numbers.

the setting.
5 ExitPress
the button.
X The screen for step 2 will reappear.

Clearing All Custom Functions
In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the
Custom Function settings.

Even after all the Custom Functions are cleared, the setting for C.Fn IV -11
[Focusing Screen] will remain intact.

3 Setting Custom Functions

Custom Functions
C.Fn I: Exposure

C.Fn III: Auto focus/Drive

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

Exposure level increments
ISO speed setting increments
Set ISO speed range
Bracketing auto cancel
Bracketing sequence
Number of bracketed shots
Spot metering link to AF point
Safety shift
Select usable shooting modes
Select usable metering modes
Exposure mode in manual exposure
Set shutter speed range
Set aperture value range
Apply shooting/metering mode
Flash sync. speed in Av mode

C.Fn II: Image/Flash exposure/Display
1
2
3
4
5
6
7
8
9

Long exposure noise reduction
High ISO speed noise reduction
Highlight tone priority
E-TTL II flash metering
Shutter curtain sync.
Flash firing
Viewfinder info. during exposure
LCD panel illumination during Bulb
INFO button when shooting

The Custom Functions whose
numbers are shaded do not
function during Live View
shooting. (Settings are disabled.)

USM lens electronic MF
AI Servo tracking sensitivity
AI Servo 1st/2nd image priority
AI Servo AF tracking method
Lens drive when AF impossible
Lens AF stop button function
AF Microadjustment
AF expansion with selected point
Selectable AF point
Switch to registered AF point
AF point auto selection
AF point display during focus
AF point brightness
AF-assist beam firing
Mirror lockup
Continuous shooting speed
Limit continuous shot count

C.Fn IV: Operation/Others
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Shutter button/AF-ON button
AF-ON/AE lock button switch
Quick Control Dial in metering
SET button when shooting
Tv/Av setting for Manual exposure
Dial direction during Tv/Av
Av setting without lens
WB + media/image size setting
H button function
Button function when 5
Focusing Screen
Timer length for timer
Shortened release time lag
Add aspect ratio information
Add original decision data
Live View exposure simulation

3 Custom Function Settings
The Custom Functions are organized in four groups based on the
function type: C.Fn I: Exposure, C.Fn II: Image/Flash exp (exposure)/
Disp (Display), C.Fn III: Auto focus/Drive, C.Fn IV: Operation/Others.
Note that the Custom Function numbers differ from previous
EOS-1Ds-series cameras.

C.Fn I: Exposure
C.Fn I -1

Exposure level increments

0: 1/3-stop set 1/3-stop compensation
1: 1-stop set
1/3-stop compensation
Sets full-stop increments for the shutter speed and aperture.
2: 1/2-stop set 1/2-stop compensation
Sets 1/2-stop increments for the shutter speed, aperture, and exposure
compensation.

ISO speed setting increments

0: 1/3 stop
1: 1-stop

Set ISO speed range

Disable: The settable ISO speed range will be 100 - 1600.
Enable: The settable ISO speed will range from the highest ISO speed to
the lowest ISO speed set with [Register].
Register: The highest ISO speed can be registered within 100 to H (3200),
and the lowest ISO speed can be registered within L (50) to
1600. After entering the settings, select [Apply].
If the highest ISO speed H (3200) and the lowest ISO speed L (50) are
registered, it will be the same as “ISO speed expansion.”

3 Custom Function Settings

Bracketing auto cancel

0: On
The AEB and WB-BKT settings will be canceled when the power switch
is set to <2> or the camera settings are cleared. AEB will also be
canceled when bulb exposure is set or the flash is ready to fire.
1: Off
The AEB and WB-BKT settings will be retained even when the power
switch is set to <2>. (When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained in memory.)

Bracketing sequence

The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, - , +
1: -, 0, +
2: +, 0, WB bracketing
B/A Direction
M/G Direction
0 : Standard exposure 0 : Standard white balance 0 : Standard white balance
- : Decreased exposure - : More blue
- : More magenta
+ : Increased exposure + : More amber
+ : More green
AEB

Number of bracketed shots

The number of shots taken with AEB and white balance bracketing can be
changed from the usual 3 shots to 2, 5, or 7 shots. When C.Fn I -5-0 is set,
the bracketed shots will be taken as shown in the table below.
0: 3 shots
1: 2 shots
2: 5 shots
(1-stop increments)
3: 7 shots
0: 3 shots
1: 2 shots
2: 5 shots
3: 7 shots

1st shot 2nd shot 3rd shot 4th shot 5th shot 6th shot 7th shot
Standard (0)
-1
+1
Standard (0)
-1
Standard (0)
-2
-1
+1
+2
Standard (0)
-3
-2
-1
+1
+2
+3

3 Custom Function Settings

Spot metering link to AF point

0: Disable (use center AF point)
1: Enable (use active AF point)
Enables spot metering linked to the selected AF point. With automatic
AF point selection, spot metering will be at the viewfinder center.

0: Disable
1: Enable (Tv/Av)
This works in the shutter-priority AE (Tv) and aperture-priority AE (Av)
modes. When the subject’s brightness changes erratically and the
correct autoexposure cannot be obtained, the camera will change the
exposure setting automatically to obtain a correct exposure.
2: Enable (ISO speed)
This works in the Program AE, shutter-priority AE, and aperture-priority
AE modes. When the subject’s brightness changes erratically and the
correct autoexposure cannot be obtained, the camera will change the
ISO speed within 100 - 1600 automatically to obtain a correct exposure.
If 2 is set, the maximum burst during continuous shooting (p.54) will
decrease. However, depending on the ISO speed during shooting, the
actual maximum burst might be higher than indicated in the viewfinder.
Even if the settable ISO speed range has been changed with C.Fn I 3,12/13, the safety shift will override it when necessary to obtain the
correct exposure.
With settings 1 and 2, safety shift also works with flash.

Select usable shooting modes

Disable: All the shooting modes (a, s, f, d, Bulb) will be selectable.
Enable: Only the shooting modes set with [Register] will be selectable.
Register: To make a shooting mode unselectable, uncheck the checkmark
. After entering the settings, select [Apply].

3 Custom Function Settings

Select usable metering modes

Disable: All the metering modes (q: Evaluative, w: Partial, r: Spot,
e: Center-weighted average) will be selectable.
Enable: Only the metering modes set with [Register] will be selectable.
Register: To make a metering mode unselectable, uncheck the checkmark
. After entering the settings, select [Apply].

Exposure mode in manual exposure

You can set the metering mode to be used in the manual exposure mode.
0: Specified metering mode
1: Evaluative metering
2: Partial metering
3: Spot metering
4: Center-weighted average
With settings 1 to 4, you cannot change the metering mode by pressing the
button during shooting.

Set shutter speed range

Disable: The settable shutter speed range will be 1/8000 sec. to 30 sec.
Enable: The settable shutter speed will range from the highest shutter
speed to the lowest shutter speed set with [Register].
Register: The highest shutter speed can be registered within 1/8000 sec.
to 1/250 sec., and the lowest shutter speed can be registered
within 30 sec. to 1/60 sec. After entering the settings, select
[Apply].

Set aperture value range

Disable: The settable aperture will range from the camera-attached lens’
maximum aperture to minimum aperture.
Enable: The settable aperture will range from the smallest to largest
aperture set with [Register].
Register: The smallest aperture can be registered within f/1.4 to f/91, and
the largest aperture can be registered within f/1.0 to f/64. After
entering the settings, select [Apply].

3 Custom Function Settings

Apply shooting/metering mode

While holding down the (AE lock) button, you can switch to the
registered setting (shooting mode, metering mode, shutter speed, aperture,
or exposure compensation).
Disable: Pressing the button will lock the exposure (AE lock).
Enable: By holding down the button, you can instantly switch to the
registered setting.
Register: Set the desired setting for the AE lock button: shooting mode,
metering mode, shutter speed, aperture, or exposure
compensation.
When you select [Register], [With AE lock button (AF on/AF
off)] will be displayed where you can set the AE lock button to
also execute AF or not. Select [AF on/AF off] to register the
setting to the camera.

Flash sync. speed in Av mode

0: Auto
1: 1/250 sec. (fixed)
Sets the flash sync speed to 1/250 sec. in the aperture-priority AE (Av)
mode. (Against dark backgrounds such as the night sky, the subject’s
background will look dark.)

3 Custom Function Settings

C.Fn II: Image/Flash exposure/Display
C.Fn II -1

Long exposure noise reduction

0: Off
1: Auto
For 1 sec. or longer exposures, noise reduction is performed
automatically if noise typical of long exposures is detected. This [Auto]
setting is effective in most cases.
2: On
Noise reduction is performed for all exposures 1 sec. or longer. The [On]
setting may be effective for noise that cannot be detected or reduced
with the [Auto] setting.
With setting 2, if a long exposure is made during Live View shooting, the
LCD monitor will not display anything (no Live View image display) while
noise reduction is applied after the picture is taken. During the noise
reduction process, shooting is possible. However, you will not be able to see
anything on the LCD monitor and in the viewfinder. Since you cannot check
the focus and picture composition, shooting is not recommended during the
noise reduction process.
With setting 1 and 2, after the picture is taken, the noise reduction process
may take the same amount of time as the exposure. During the noise
reduction, shooting is still possible as long as the maximum burst indicator
in the viewfinder shows “1” or higher.

High ISO speed noise reduction

0: Off
1: On
Reduces the noise generated in the image. Although noise reduction is
applied at all ISO speeds, it is particularly effective at high ISO speeds.
At low ISO speeds, the noise in the shadow areas is further reduced.
With setting 1, the maximum burst for continuous shooting will greatly
decrease.

3 Custom Function Settings

Highlight tone priority

0: Disable
1: Enable
Improves the highlight detail. The dynamic range is expanded from the
standard 18% gray to bright highlights. The gradation between the grays
and highlights becomes smoother.
With setting 1, noise in the shadow areas may be slightly more than usual.
With setting 1, the settable ISO speed range will be 200 - 1600. Also, the ISO speed
displayed on the top LCD panel and in the viewfinder, will have the “0” displayed as a
smaller character such as “2oo”. When the image’s shooting info (p.117) is
displayed, the ISO speed’s “0” will also be displayed as a smaller character.

E-TTL II flash metering

0: Evaluative flash metering
Fully automatic flash photography for all conditions, from low light to
daylight fill-flash.
1: Average flash metering
The flash is averaged for the entire area covered by the flash. Since
automatic flash exposure compensation will not be executed, you may
have to set it yourself depending on the scene. This also applies if you
use FE lock.

Shutter curtain sync.

0: 1st-curtain synchronization
1: 2nd-curtain synchronization
The flash fires right before the shutter closes. When a slow shutter speed is
set, you can capture a light trail following the subject.
This Custom Function can be used to obtain 2nd-curtain sync effects even
with EX-series Speedlites which do not have this feature. If the EX-series
Speedlite has this feature, it will override this Custom Function’s setting.
With setting 1, a preflash will be fired for flash metering control right after
you press the shutter button completely. Remember that the main flash will
then fire right before the shutter closes.

3 Custom Function Settings

Enables or disables the firing of an external flash or non-Canon flash
connected to the PC terminal.
0: Enable
1: Disable
Convenient when you want to use the external flash’s AF-assist beam
only. Note that whether or not the AF-assist beam is emitted is
dependent on the C.Fn III -14 setting.

Viewfinder info. during exposure

0: Disable
1: Enable
The viewfinder information will be displayed even during an exposure. Displays the
exposure setting, number of remaining shots, etc., during continuous shooting.

LCD panel illumination during Bulb

0: Off
1: On during Bulb
If the LCD panel’s illumination is on (p.102) and you take a bulb
exposure, the illumination will continue until the bulb exposure ends.
This is convenient when you are taking a bulb exposure in low light and
want to check the exposure time.

INFO button when shooting

What is displayed on the LCD monitor when you press the button
when the camera is ready to shoot can be changed.
0: Displays camera settings
Displays the camera settings. (p.186)
1: Displays shooting functions
Displays shooting functions as found on the top LCD
panel and in the viewfinder. When the display is on, you
can still press the button and select the AF point
on the LCD monitor.
This is convenient when it is difficult to set the camera
settings while viewing the top LCD panel, when you are
shooting straight up, or when the camera position or
point of focus is fixed and you only want to change the camera settings during shooting.

3 Custom Function Settings

C.Fn III: Auto focus/Drive
C.Fn III -1

USM lens electronic MF

USM lens electronic MF can be enabled or disabled for when you use any
of the following lenses.
EF50mm f/1.0L USM, EF85mm f/1.2L USM, EF85mm f/1.2L II USM,
EF200mm f/1.8L USM, EF300mm f/2.8L USM, EF400mm f/2.8L USM,
EF400mm f/2.8L II USM, EF500mm f/4.5L USM, EF600mm f/4L USM,
EF1200mm f/5.6L USM, or EF28-80mm f/2.8-4L USM
0: Enable after One-Shot AF
After focus is achieved in One-Shot AF, electronic MF is enabled. If C.Fn
IV -1-2, 3 is set, it is also enabled before focus is achieved.
1: Disable after One-Shot AF
After focus is achieved in One-Shot AF, electronic MF is disabled. If
C.Fn IV -1-2, 3 is set, it is possible before focus is achieved.
2: Disable in AF mode
Electronic MF is disabled in the AF mode.

AI Servo tracking sensitivity

During focusing in the AI Servo AF mode, the AF sensitivity for tracking
subjects (or obstacles) moving into AF points can be set to one of five
levels.
If it is set toward [Slow], interruptions by any obstacles will be less
disruptive. It makes it easier to keep tracking the target subject.
If it is set toward [Fast], it will be easier to focus any subjects which
suddenly enter the picture from the side. Convenient when you want to
successively photograph multiple subjects located at random distances.

AI Servo 1st/2nd image priority

For the AI Servo AF and continuous shooting modes, you can change the
Servo’s operation characteristics and shutter-release timing.
0: AF priority/Tracking priority
For the first shot, focusing the subject is given priority. For the 2nd and
following shots during continuous shooting, focus-tracking of the subject
is given priority.

3 Custom Function Settings

1: AF priority/Drive speed priority
For the first shot, focusing the subject is given priority. During continuous
shooting, the continuous shooting speed is given priority over the focustracking of the subject.
2: Release/Drive speed priority
For the first shot, shutter release is given priority over focusing the
subject. During continuous shooting, the continuous shooting speed is
given priority more than with setting 1.

AI Servo AF tracking method

In the AI Servo AF mode while you are focus-tracking a subject, the camera
can either continue focusing the target subject even if a closer subject
(closer than at the main focus point) suddenly appears in the picture, or the
camera can switch to focus the closer subject.
*Main focus point = With automatic AF point selection: Center AF point
With manual AF point selection + AF point expansion
(C.Fn III -8-1/2): Manually-selected AF point
0: Main focus point priority
The active AF point will switch to the main AF point and start focusing
the closer subject. Convenient when you always want to focus the
closest subject.
1: Continuous AF track priority
Any closer subject appearing in the picture will be ignored as an
obstruction. The main focus point does not take priority, so the tracking
of the target subject can continue and switch to an adjacent AF point
based on the preceding focusing result. Convenient when obstacles
such as telephone poles go in front of the target subject.

Lens drive when AF impossible

If autofocus is executed, but focus cannot be achieved, the camera can
either keep trying to focus or stop.
0: Focus search on
1: Focus search off
Prevents the camera from becoming grossly out of focus as it attempts
to focus again. Especially convenient with super telephoto lenses which
can become extremely out of focus.

3 Custom Function Settings

Lens AF stop button function

0: AF stop
1: AF start
AF operates only while the button is pressed. While the button is
pressed, AF operation with the camera is disabled.
2: AE lock
When the button is pressed, AE lock is applied. Convenient when you
want to focus and meter at different parts of the picture.
3: AF point: M 9 Auto/Auto 9 ctr
In the manual AF point selection mode, the button instantly switches to
automatic AF point selection (among 45 AF points) while you hold it
down. Convenient when you are no longer able to focus track a moving
subject with a manually-selected AF point in the AI Servo AF mode. You
can instantly switch from manual to automatic AF point selection mode.
In the automatic AF point selection mode, the button selects the center
AF point only while you hold it down.
4: ONE SHOT z AI SERVO
In the One-Shot AF mode, the camera switches to AI Servo AF mode
only while you hold down the button. And in the AI Servo AF mode, the
camera switches to One-Shot AF mode only while you hold down the
button.
Convenient when you need to keep switching between One-Shot AF
and AI Servo AF for a subject which keeps moving and stopping.
5: IS start
With the lens’ IS switch already , the Image Stabilizer operates
when you press the button.
6: Switch to registered AF point
While holding down the AF Stop button, press the button to
switch to the registered AF point. Press it again to switch to the previous
AF point.
The AF stop button is provided only on super telephoto IS lenses.
With setting 5, the Image Stabilizer will not operate when you press the
shutter button halfway.
To register the AF point, see page 171.

3 Custom Function Settings

AF Microadjustment

Normally, this adjustment is not required. Do this adjustment
only if necessary. Note that doing this adjustment may
prevent correct focusing from being achieved.
You can make fine adjustments of the AF’s
point of focus. It can be adjusted in ±20 steps
(-: Forward / +: Backward).
The adjustment amount of one step varies
depending on the maximum aperture of the
lens. Adjust, shoot, and check the focus.
Repeat to adjust the AF’s point of focus.
With setting 1 or 2 selected, press the button to view the register
screen. To cancel all the registered adjustments, press the button.
0: Disable
1: Adjust all by same amount
The same adjustment amount is applied to
all lenses.
2: Adjust by lens
An adjustment can be set individually for
any particular lens. Adjustments for up to
20 lenses can be registered in the camera.
When a lens whose focus adjustment has
been registered is attached to the camera,
its point of focus will be shifted accordingly.
If adjustments for 20 lenses have already
been registered and you want to register an adjustment for another lens,
select a lens whose adjustment can be overwritten or deleted.
When you adjust, shoot, and check the focus to make the adjustment, set the
image size to JPEG Large and the JPEG quality (compression) to 8 or higher.
It is best to make the adjustment at the actual place to be photographed.
This will make the adjustment more precise.
With setting 2, if an extender is used, the adjustment will be registered
for the lens and extender combination.
With settings 1 and 2, you can check the adjustment amount on the
camera settings screen (p.186). Also, when you display the image’s
shooting information (p.117), you can see the adjustment amount.
The registered AF microadjustments will be retained even if you use the Custom
Function to clear all settings (p.156). However, the setting itself will be [0: Disable].

3 Custom Function Settings

AF expansion with selected point

In the AI Servo AF or One-Shot AF mode with manual AF point selection,
you can increase the number of AF points by using the Assist AF points.
Effective when it is difficult to track a moving subject with just one AF point.
0: Disable
1: Enable (left/right Assist AF points)
The points on the immediate left and right (or top and bottom for a
vertical shot) of the user-selected AF point become active.
2: Enable (surrounding Assist AF points)
The points immediately surrounding the user-selected AF point become
active.
The AF point expansion centers on the selected AF point. Therefore, if a
peripheral AF point is selected, the AF point expansion will be smaller as
shown below.
Assist AF point expanded by 1 point on left and right

Selected AF point

Assist AF point expanded by 1 point all around

Expansion points

Even when C.Fn III -9-1/2 is set, the expansion will take effect.

Selectable AF point

0: 19 points
1: Inner 9 points
The user-selectable AF points will be limited to the inner 9 points.
2: Outer 9 points
The user-selectable AF points will be limited to the outer 9 points.
With settings 1 and 2, the selectable AF points and the selection pattern will
be as shown below:

Automatic selection

Outer 9 points
Automatic selection

Automatic selection

Automatic selection

3 Custom Function Settings

Switch to registered AF point

You can instantly switch to the registered AF point with <9> while the metering
timer is active. (AF is activated at the moment when AF point is switched.)
0: Disable
1: Enable
By pressing <9>, you can switch to the registered AF point. Press it
again to switch to the previous AF point.
Registering the AF point (Multiple AF points cannot be registered.)
You can register an AF point you use frequently.
1. Select the AF point to be registered. (p.84)
2. While holding down the button, press the button.
• [ -- -- ] HP : Automatic selection, SEL [ ] : Center AF point,
SEL HP : Off-center AF point
If you change the C.Fn III -9 setting, the registered AF point will be
canceled. The camera will switch to the center AF point.

AF point auto selection

For AF point selection, you can enable or disable automatic selection.
The setting before the slash (/) applies to the <5> dial’s function with C.Fn
IV -3-1 set. And the setting after the slash applies to the <6> dial’s
function when the button is pressed.
0: 5direct:disable/6:enable
When metering is active, the <5> dial cannot select automatic
selection. You can select automatic selection with <6>.
1: 5direct:disable/6:disable
Automatic selection cannot be selected.
2: 5direct:enable/6:enable
When metering is active, the <5> dial can select automatic selection.
You can select automatic selection with <6>.

AF point display during focus

0: On
1: Off
The AF point will not light in red other than during AF point selection.
2: On (when focus achieved)
The manually selected AF point will not dimly light during autofocusing.
(The AF point will light only when AF is started or focus is achieved.)

3 Custom Function Settings

AF point brightness

0: Normal
1: Brighter

AF-assist beam firing

Enables or disables the EOS-dedicated Speedlite’s AF-assist beam.
0: Enable
The external Speedlite will emit the AF-assist beam when necessary.
1: Disable
The external Speedlite’s Custom Function [AF-assist beam firing] set to
[Disable] will override this Custom Function’s 0 setting.

See page 104 for the mirror lockup procedure.
0: Disable
1: Enable
2: Enable: Down with SET (button)
With setting 1 and 2, the <2> icon will appear on the top LCD panel.

Continuous shooting speed

Disable: Continuous shooting will be enabled: : Approx. 5 fps,
: Approx. 3 fps
Enable: The continuous shooting speed set with [Register] will be enabled.
Register: can be set within 2 fps to 5 fps, and
can be set
within 1 fps to 4 fps. After entering the settings, select [Apply].

Limit continuous shot count

Disable: No limit is set on the continuous shot count. (Continuous
shooting will be possible up to the maximum burst indicated.)
Enable: The continuous shooting will be limited to the number set with
[Register] after which the shooting will stop automatically.
Register: The continuous shot count can be limited to 2 to 99. After
entering the settings, select [Apply].

3 Custom Function Settings

C.Fn IV: Operation/Others
C.Fn IV -1

Shutter button/AF-ON button

0: Metering + AF start
1: Metering + AF start/AF stop
During autofocusing, you can press the
button to stop the autofocusing.
2: Metering start/Meter + AF start
This is useful for subjects which keep moving and stopping repeatedly.
In the AI Servo AF mode, you can press the
button to
repeatedly start or stop the AI Servo AF operation. The exposure is set
at the moment the picture is taken. Thus, the optimum focusing and
exposure will always be achieved as you wait for the decisive moment.
3: AE lock/Metering + AF start
Convenient when you want to focus and meter at different parts of the
picture. Press the
button to meter and autofocus, and press
the shutter button halfway to attain AE lock.
4: Metering + AF start / disable
The
button will not function.

AF-ON/AE lock button switch

0: Disable
1: Enable
The functions of the
and buttons will be switched
with each other’s function.

Quick Control Dial in metering

The Quick Control Dial’s function while the metering is active can be changed.
0: Exposure compensation/Aperture
1: AF point selection
You can select the AF point directly with the <5> dial without first pressing
the button. While metering is active, turning the <5> dial will select a
horizontal AF point. Automatic selection cannot be selected. However, if
C.Fn III -11-2 has also been set, automatic selection can be selected.
Press the button and turn the <6/5> dial to set the aperture for
exposure compensation or manual exposure.
2: ISO speed
While metering is active, you can turn the <5> dial to change the ISO speed in real-time.

3 Custom Function Settings

SET button when shooting

You can assign a frequently-used function to <0>. When the camera is
ready to shoot, you can press <0>.
0: Normal (disabled)
1: White balance
While looking at the rear LCD panel, you can change the WB.
2: Image size
While looking at the rear LCD panel, you can change the memory card
and image size.
3: ISO speed
While looking at the top LCD panel or in the viewfinder, you can change
the ISO speed.
4: Picture Style
The [1 Picture Style] menu will appear.
5: Record func. + media/folder
The [5 Record func+media/folder sel.] menu will appear.
6: Menu display
Gives the same function as the button.
7: Image playback
Gives the same function as the button.
If the [Live View shoot.] menu has been set to [Enable], the Live View
shooting will override any setting from 1 to 7 above. Pressing <0> will
show the Live View image instead.

Tv/Av setting for Manual exposure

0: Tv=6/Av=5
1: Tv=5/Av=6
Convenient when you use studio flash and frequently change the
aperture.
Also, when you use AEB in the manual exposure mode, the shutter
speed can stay fixed while only the aperture is shifted for AEB. The
shutter speed can also be set by pressing the button and turning
the <6/5> dial.

3 Custom Function Settings

Dial direction during Tv/Av

0: Normal
1: Reverse direction
The dial’s turning direction for setting the shutter speed and aperture can be
reversed.
In the manual exposure mode, the direction of the <6> and <5> dials
will be reversed. In other shooting modes, the <6> dial will be reversed.
The direction of the <5> dial will be the same in the manual exposure
mode and for setting exposure compensation.

Av setting without lens

0: Disable
1: Enable
You can set the aperture setting with the camera even when a lens is not
attached. Convenient especially if you use a super telephoto lens with
more than one EOS-1Ds Mark III camera body.

WB + media/image size setting

When you press the button to set the white balance, memory
card, or image size, you can choose to do it with the rear LCD panel or with
the menu screen.
0: Rear LCD panel
1: LCD monitor
When you press the button, the menu screen will appear. Each
time you press the button, the screen will change for the White balance,
Image size, and Record func+media/folder sel.
Even with setting 1, if you press the button during Live View
shooting, you can set the settings above while looking at the rear LCD
panel.

H button function

0: Protect (holding:sound rec.)
Press the button for 2 sec. and the sound recording will start.
1: Sound rec. (protect:disable)
To start the sound recording, press the button. To protect an
image, use the [3 Protect images] menu.

3 Custom Function Settings

Button function when 5

0: Normal (enable)
1: Disable 6,5,Multi-controller
When the power switch is set to <1>, the <6>, <5>, and <9>
will be disabled from setting anything. The shutter button can still be
used to shoot. This prevents any settings to be changed inadvertently,
so it is convenient when you keep shooting with the same settings.
Even with setting 1, if the power switch is set to , you can use <6>,
<5>, and <9> to change settings.

Focusing Screen

If you change the focusing screen, change this setting to match the
focusing screen type. This is to obtain the correct exposures.
0: lEc-C IV
Standard focusing screen (Laser-matte).
1: lEc-A, B, C, C II, C III, D, H, I, L
For Laser-matte screens.
2: pEc-S
For Super Precision Matte screens.
3: kEc-N,R
For New Laser-matte screens.
The pEc-S focusing screen is optimized for lenses whose maximum aperture
is f/1.8 to f/2.8. If the lens maximum aperture is brighter than f/1.8, the center
spot metering circle and Area AF ellipse might become difficult to see.
Also, if the lens maximum aperture is slower than f/2.8, the viewfinder will
look darker.
Even if all the Custom Functions are cleared, this setting will be retained.
Since the Ec-A, Ec-B, Ec-I, and Ec-L focusing screens have a prism at
the center, correct exposures cannot be obtained with evaluative
metering and center spot metering. Use either center-weighted average
metering or AF point-linked spot metering (except the center AF point).
To change the focusing screen, refer to the instructions that came with
the focusing screen.

3 Custom Function Settings

Timer length for timer

You can change how long the function settings remain in effect after you let
go of the respective button.
Disable: The timer length is set to the default.
Enable: The timer length is set to the time set with [Register].
Register: You can set the 6-sec. and 16-sec. timer length and the timer
length for after the shutter release. The timer length can be set to
0 sec. to 59 sec. or 1 min. to 60 min. After entering the settings,
select [Apply].
• 6-sec. timer: Works with the metering while you shoot through
the viewfinder. Also works when you press the
button for AE lock.
• 16-sec. timer: Works when you press the button for
multi-spot metering and FE lock. Also works
during Live View shooting for metering and
pressing the button for AE lock.
• Timer after release: Normally, the timer is 2 sec. after the
picture is taken. A longer timer length will
make it easier to use AE lock at the same
exposure.

Shortened release time lag

Normally, stabilization control is executed for the shutter-release time lag.
This stabilization control can be omitted to make the shutter-release time
lag shorter.
0: Disable
1: Enable
When the aperture is stopped down to no more than 3 stops from the
maximum aperture, the shutter-release time lag will be as much as
about 20% shorter than normal.

3 Custom Function Settings

Add aspect ratio information

During Live View shooting, vertical lines corresponding to the aspect ratio will
be displayed. You can thereby simulate framing for medium- and large-format
film sizes such as 6x6 cm, 6x4.5 cm, and 4x5 in. This aspect ratio information
will be appended automatically to the captured image. (The image will not
actually be saved to the memory card as a cropped image.) When the image is
transferred to a personal computer and the Digital Photo Professional (provided
software) is used, the image will be displayed in the aspect ratio you specified.
0: Off
4: Aspect ratio 6:7
1: Aspect ratio 6:6
5: Aspect ratio 10:12
2: Aspect ratio 3:4
6: Aspect ratio 5:7
3: Aspect ratio 4:5
Aspect ratio information will also be appended if you shoot through the
viewfinder.
During image playback on the camera, vertical lines for the respective
ratio will be displayed.

Add original decision data

0: Off
1: On
Data for verifying whether the image is original or not is appended to the image
automatically. When the shooting info of an image appended with the verification
data is displayed (p.117), the icon will appear. To verify whether the image
is original, the Original Data Security Kit OSK-E3 (sold separately) is required.

Live View exposure simulation

0: Disable (LCD auto adjust)
1: Enable (simulates exposure)
During Live View shooting, the real-time picture shows the brightness
corresponding to the exposure setting. This enables you to check the
image’s exposure right before you take the picture.
When you press the depth-of-field preview button, the simulated
exposure is displayed regardless of the C.Fn IV -16 setting.
Even if 1 is set, the exposure simulation will not be displayed when an
external flash is used nor during bulb exposures.

3 Registering and Applying Custom Function Settings
You can register up to three sets of Custom Function settings.
You can register a different set of Custom Function settings for different
shooting situations such as sports, snapshots, and landscapes.
You can then instantly apply a registered set of Custom Function
settings.

Registering Custom Function Settings

Select [C.Fn setting register/
apply].
Under the [8] tab, select [C.Fn
setting register/apply], then press
<0>.

[Register].
2 Select
X Turn the <5> dial to select
[Register], then press <0>.

[Set].
3 Select
Turn the <5> dial to select [Set *],
then press <0>.

[OK].
4 Select
Turn the <5> dial to select [OK],
then press <0>.
X The Custom Function settings will be
registered under [Set *], and the
Custom Function settings will be
displayed in a list. To return to the
screen in step 2, press <0>.

3 Registering and Applying Custom Function Settings

The settings for C.Fn III -7 [AF Microadjustment] and C.Fn IV -11
[Focusing Screen] will not be included in the registered Custom Function
settings.
To view the registered Custom Function settings, select [Confirm settings].
The numbers of options changed from the default setting are displayed in
blue.
If the option’s settings include [Disable/Enable/Register] and it is set to
[Enable], a blue [ * ] will be displayed. (A blue [ * ] will also be displayed if
the C.Fn III -2 setting has been changed.)

Applying Custom Function Settings
In step 2, select [Apply] and select the [Set *] of the Custom Function
settings to be applied. Select [OK], and the Custom Function settings
will switch to those registered under Set *.

3 Registering My Menu
By registering the menu items and
Custom Functions which you change
frequently, you can access and change
them quickly with My Menu.
You can register the top layer of items
under each menu tab and any Custom
Function. You can register up to six items
in My Menu.

Registering My Menu Items

Select [My Menu settings].
Under the [9] tab, select [My Menu
settings], then press <0>.

[Register].
2 Select
Turn the <5> dial to select
[Register], then press <0>.

an item.
3 Select
Turn the <5> dial to select the item,
then press <0>.

Select [OK].
Turn the <5> dial to select [OK],
then press <0>.
X The selected item will be registered in
My Menu.
To register more items, repeat steps 3
and 4.
To return to the screen in step 2,
press the button.

3 Registering My Menu

Deleting My Menu Items
In step 2, select [Delete], then select the item to be deleted. To delete
all the My Menu items, select [Delete all items].

Start Display with My Menu
In step 2, select [Display from My Menu], and set [Enable]. With the
camera ready for shooting, pressing the button will display
the [9] tab first.

Sorting My Menu Items
In step 2, select [Sort]. Select the item to be sorted and press <0>.
With the [z] icon displayed on the right of the item, turn the <5> dial to
shift the item up or down on the menu. Then press <0>.
You can also register My Menu items from the provided software.

3 Saving and Loading Camera Settings
The camera’s shooting modes, Custom Functions, and other camera
settings can be saved in the memory card as a camera settings file. When
this file is loaded by the camera, the saved camera settings will be applied.
Convenient when you want to load the camera settings from a different
EOS-1Ds Mark III body and set the camera in the same way. Or you can
save and load different camera settings for different shooting situations.

Saving Camera Settings

Select [Save/load settings on
media].
Under the [7] tab, select [Save/load
settings on media], then press
<0>.

3 Saving and Loading Camera Settings

[Save].
2 Select
Turn the <5> dial to select [Save],
then press <0>.

[Start].
3 Select
Turn the <5> dial to select [Start],
then press <0>.
X The camera settings will be saved to
the memory card, and the screen in
step 2 will reappear.
If you select [Change file name], you
can change the file name (8
characters) and save the file.
(For the procedure, see “Changing
the File Name” on page 77. The
number of characters which can be
entered will be different, but the
procedure for entering the file name
is the same.)

Loading camera settings
In step 2, select [Load]. Up to 10 camera settings files saved in the
memory card will be displayed. When you select the desired file, it will
be loaded and the settings will be applied to the camera.
Settings for the date/time, language, video system, C.Fn III -7 and
C.Fn IV -11 will not be saved in the file.
Up to 10 camera settings files can be saved in a memory card. If the
memory card already has 10 camera settings files, you can either
overwrite the existing file or use another card.
The camera settings files saved with the camera other than the EOS-1Ds
Mark III cannot be loaded to the EOS-1Ds Mark III.

3 Registering Basic Camera Settings
You can set the basic settings for major functions such as the shooting
mode, AF mode, metering mode, and drive mode and register them in
the camera.
This is convenient when you want to instantly switch to frequently-used
shooting settings.

Registering Basic Settings

Select [Regist/apply basic settings].
Under the [7] tab, select [Regist/apply
basic settings], then press <0>.

[Register].
2 Select
Turn the <5> dial to select
[Register], then press <0>.

a function.
3 Select
Turn the <5> dial to select the
function, then press <0>.
Up to nine settings such as the
shooting mode, white balance, and
drive mode can be set.

the function as desired.
4 SetTurn
the <5> dial to select the
desired setting, then press <0>.

Exit the setting.
To exit the setting and return to the
screen in step 2, press the
button.

Applying Basic Settings
In step 2, select [Apply]. The camera settings will switch to the
registered settings. [Record func.] will also be set to [Standard], and
the exposure compensation, AEB, flash exposure compensation, and
WB-BKT will all be canceled.

Reference
This chapter provides reference information for camera
features, system accessories, etc. The back of this
chapter also has an index to make it easier to look up
things.

Camera Settings & Battery Information
B Camera Settings
When the camera is ready to shoot, you can press the button
to view the function settings on the LCD monitor.

Display the camera settings.
Press the button.

Picture Style (p.57)
Picture Style parameters (p.58)
Color space (p.72)
WB correction (p.70)/
BKT setting (p.71)
File name setting (p.77)
Shots remaining on CF card
and SD card (p.53)
Date/Time (p.46)
Auto rotate display (p.130)
AF microadjustment (p.169)

If C.Fn II -9-1 is set, the shooting functions will be displayed. (p.165)

Camera Settings & Battery Information

3 Battery Info.
You can check the battery’s condition on a menu screen.

Select [Battery info.].
Under the [6] tab, select [Battery
info.], then press <0>.

Designation of the battery being used
or household power source.
Remaining battery level displayed by
the battery check display (p.29) in 1%
increments.
Shots taken with the current battery.
The number is reset when the battery
is recharged.
Battery’s performance level is
displayed in one of three levels. (p.27)
(Green): Battery performance
is fine.
(Green): Battery performance
is slightly degraded.
(Red): Purchasing a new
battery is recommended.
If “Calibration is recommended when charging battery next time” is
displayed at the bottom of the LCD monitor, see page 28.
If for some reason, communication with the battery is not successful, the
battery check display will show on the top LCD panel and the
viewfinder. When you check the battery info, [Cannot communicate
with battery] will be displayed. However, shooting will still be possible.
If you use any battery other than Battery Pack LP-E4, the camera might
not attain its full performance. It may also cause camera malfunction.
Using Battery Pack LP-E4 is recommended.

Replacing the Date/Time Battery
The date/time (back-up) battery maintains the camera’s date and time.
Its service life is about 5 years. If the date/time is reset when the battery
is replaced, replace the back-up battery with a new CR2025 lithium
battery as described below.
The date/time setting will also be reset, so be sure to set the
correct date/time.

Set the power switch to <2>
and remove the battery pack.
The back-up battery is on the ceiling
of the battery compartment.

the back-up battery
2 Remove
cover.
Use a small screwdriver to loosen the
screw and remove the cover.
Be careful not to lose the cover and screw.

3 Remove the battery.
(+)

a new back-up battery.
4 Install
The plus side of the battery must face
up.

5 Attach the cover.
For the date/time battery, be sure to use a CR2025 lithium battery.

O
1
20 00
40 0
16 800 0
00

The following program line applies when the camera is in Program AE
mode.

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

1.0
8 15 30 60 125 250 500 1000 2000 4000 8000
Shutter speed

Understanding the Program Line
The lower horizontal axis represents the shutter speed, and the right-hand
vertical axis represents the aperture.
The combinations of shutter speed and aperture automatically determined by
Program AE are shown as lines with respect to the subject brightness
(Exposure Value) levels on the left and top edges of the graph.
Using an EF50mm f/1.4 USM lens with a subject brightness of EV12, the point
where the diagonal line from EV12 (on the top edge) intersects the Program AE
line represents the corresponding shutter speed (1/320 sec.) and aperture
(f/3.5) that the program sets automatically. The diagonal arrowed lines at the
upper left indicate the metering range for each ISO speeds.

Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.

Power
The battery cannot be recharged with the battery charger provided.
To prevent mishaps, the battery charger cannot recharge any battery
other than Battery Pack LP-E4.

The camera does not operate even when the power switch is
set to <1>.
The battery is not properly installed in the camera. (p.29)
Make sure the memory card slot cover is closed. (p.32)
If the top LCD panel does not display the camera settings, recharge
the battery. (p.26)

The access lamp remains on even when the power switch is
set to <2>.
The images are still being recorded to the memory card. After all the
images are recorded to the memory card, the access lamp turns off
and the camera turns off automatically.

The battery becomes exhausted quickly.
Use a fully-charged battery. (p.26)
The battery performance might have degraded. See the [6 Battery
info.] menu to check the battery’s performance level (p.187). If the
battery performance is poor, replace the battery with a new one.

The camera turns off by itself.
Auto power off is in effect. If you do not want auto power off to take
effect, set the [5 Auto power off] menu to [Off].

Troubleshooting Guide

Shooting
No images can be shot or recorded.
The memory card is not properly inserted. (p.32)
If the memory card is full, replace the card or delete unnecessary
images to make room.
Or if a not-full memory card is inserted in the other card slot, switch the
recording to that card. (p.32, 73, 128)
If you try to focus in the One-Shot AF mode while the focus
confirmation light in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to focus, or focus
manually. (p.36, 86)

The LCD monitor does not display a clear image.
If dust is adhering to the LCD monitor, wipe with a lens cloth or soft
cloth.
In low or high temperatures, the LCD monitor display may seem slow
or it might look black. It will return to normal at room temperature.

The image is out of focus.
On the lens, set the focus mode switch to . (p.35)
To prevent camera shake, hold the camera still and press the shutter
button gently. (p.36, 40)

The memory card is unusable.
If a memory card error message is displayed, see page 48 or 193.

Troubleshooting Guide

Live View shooting is not possible.
When using Live View shooting, use a memory card (a hard disk-type
card such as MicroDrive is not recommended). A hard disk-type card
requires a lower temperature range for operation than with normal
memory cards. If the temperature gets too high, the Live View shooting
may stop temporarily to prevent damage to the card’s hard disk. When
the camera’s internal temperature decreases, the Live View shooting
will be able to resume. (p.109)

Image Review & Operation
The image cannot be erased.
If the image has been erase-protected, it cannot be erased. (p.123)

The shooting date and time displayed is incorrect.
The correct date and time has not been set. (p.46)

No image appears on the TV screen.
Make sure the video cable plug is connected all the way in. (p.122)
Set the video OUT format (NTSC/PAL) to the same video format as
the TV. (p.44)
Use the video cable that came with the camera. (p.122)

Error Codes
Error code

Countermeasures

If there is a problem with the camera, an
error message appears. Follow the
instructions displayed.
To recover from the error, press the shutter
button halfway, turn the power switch
<2> and <1>, or remove and
reinstall the battery.
If error 02 (memory card problem) is
displayed, remove and reinstall the
memory card or format the card. This may
resolve the problem.

If the same error keeps appearing, there may be a problem. Write
down the error code and consult your nearest Canon Service
Center.

Dioptric Adjustment
Lenses Eg

Macro Ring Lite
MR-14EX

Macro Twin Lite
MT-24EX

Bundled
Accessories

Anti-Fog
Eyepiece Eg

USB cable
protector

CR2025 lithium battery
Angle Finder C
Hand Strap E1
EOS DIGITAL Software Instruction
Solution Disk
Manual

Battery Pack LP-E4

Focusing
Screen Ec

AC Adapter Kit
ACK-E4

Battery Charger
LC-E4

Car Battery
Cable CB-570

Timer Remote
Controller
TC-80N3

Remote
Switch
RS-80N3

Wireless
Controller
LC-5

Canon EF lenses

TV/Video
Wireless File
Transmitter
WFT-E2/WFT-E2A

Video Cable
VC-100

USB external media

Interface Cable
IFC-200U

Interface Cable
IFC-500U

Wireless LAN
access point

Wireless LAN adapter
Ethernet port

Original Data Security
Kit OSK-E3

Personal
computer
Windows Vista
Windows XP
Windows 2000
Mac OS X

PictBridge-compatible printer

Specifications
• Type
Type:
Recording media:

Image sensor size:
Compatible lenses:

Digital, single-lens reflex, AF/AE camera
Type I or II CF card, SD memory card
* CF cards, SD memory cards (including SDHC), and
Microdrive cards with a 2GB or larger capacity can be used
* High-speed data writing enabled with UDMA CF cards
* With Wireless File Transmitter WFT-E2/E2A attached,
recording possible with USB external media
Approx. 36 x 24 mm
Canon EF lenses (except EF-S lenses)
(The effective lens focal length is the same as indicated
on the lens)
Canon EF mount

• Image Sensor
Type:
Pixels:
Aspect ratio:
Color filter system:
Low-pass filter:
Dust deletion feature:

High-sensitivity, high-resolution, large single-plate CMOS
sensor
Effective pixels: Approx. 21.10 megapixels
Total pixels: Approx. 21.90 megapixels
3:2
RGB primary color filter
Located in front of the image sensor, non-removable
(1) Automatic sensor cleaning
(2) User-activated sensor cleaning
(3) Dust Delete Data appended to the captured image

• Recording System
Recording format:
Image type:
RAW+JPEG
simultaneous recording:
File size:

Folder setting:

Design rule for Camera File System 2.0
JPEG, RAW (14bit)
Provided (sRAW+JPEG also possible)
(1) L (Large)
: Approx. 6.4 MB (5616 x 3744 pixels)
(2) M1 (Medium1) : Approx. 5.2 MB (4992 x 3328 pixels)
(3) M2 (Medium2) : Approx. 3.9 MB (4080 x 2720 pixels)
(4) S (Small)
: Approx. 2.2 MB (2784 x 1856 pixels)
(5) RAW
: Approx. 25.0 MB (5616 x 3744 pixels)
(6) sRAW
: Approx. 14.5 MB (2784 x 1856 pixels)
* JPEG quality: 8, ISO 100, Picture Style: Standard
* Exact file sizes depend on the subject, JPEG quality,
ISO speed, Picture Style, etc.
Folder creation/selection enabled

File name:
File numbering:
Color space:
Picture Style:
Recording methods:

Image copy:
Backup:

Preset code, User setting1 (4 characters), User setting2
(3 characters + 1 image size character)
Consecutive numbering, auto reset, manual reset
sRGB, Adobe RGB
Standard, Portrait, Landscape, Neutral, Faithful,
Monochrome, User Def. 1 - 3
(1) Standard
(2) Auto switch media
(recording media switched automatically)
(3) Rec. separately
(specified image size for each recording media)
(4) Rec. to multiple
(same image recorded to all recording media)
Image copying between recording media enabled
(Images with checkmarks or all images in folder or card)
With WFT-E2/E2A attached, all images and folders in the CF
card and SD card can be backed up to USB external media

• White Balance
Settings:

Auto, daylight, shade, cloudy, tungsten light, white fluorescent
light, flash, custom (total 5 settings), color temperature
setting, personal white balance (total 5 settings)
Auto white balance:
Auto white balance with the image sensor
Color temperature compensation: White balance correction: ±9 stops in full-stop increments
White balance bracketing: ±3 stops in full-stop increments
* Blue/amber direction or magenta/green direction possible
Color temperature
information transmission: Provided

• Viewfinder
Type:
Coverage:

Eye-level pentaprism
Approx. 100 percent vertically and horizontally with
respect to the effective pixels
Magnification:
Approx. 0.76x (-1 diopter with 50mm lens at infinity)
Eyepoint:
20mm
Built-in dioptric adjustment: -3.0 - +1.0 diopter
Focusing screen:
Interchangeable (11 types, sold separately), Standard
focusing screen: Ec-C IV
Mirror:
Quick-return half mirror (transmission:reflection ratio of 37:63,
no mirror cut-off with EF1200mm f/5.6L USM or shorter lens)

Viewfinder information: AF information (AF points, focus confirmation light),
metering and exposure information (metering mode, spot
metering circle, shutter speed, aperture, manual
exposure, AE lock, ISO speed, exposure level, exposure
warning), flash information (flash ready, FP flash, FE
lock, flash exposure level), white balance correction,
JPEG/RAW recording, maximum burst, number of shots
remaining, battery check, recording media information
Depth-of-field preview: Enabled with depth-of-field preview button
Eyepiece shutter:
Built-in

• Autofocus
Type:
AF points:
Metering range:
Focus modes:

TTL-AREA-SIR with a CMOS sensor
19 AF points (cross-type) and 26 Assist AF points (total 45 points)
EV -1 - 18 (at 23°C/73°F, ISO 100)
One-Shot AF (ONE SHOT), AI Servo AF (AI SERVO),
Manual focusing (MF)
AF point selection:
Automatic selection (45 points), manual selection (19
points, 9 inner points, 9 outer points)
Selected AF point display: Superimposed in viewfinder and indicated on top LCD panel
AF-assist beam:
Emitted by the dedicated external Speedlite

• Exposure Control
Metering modes:

Metering range:
Exposure control:

63-zone TTL full-aperture metering
(1) Evaluative metering (linkable to any AF point)
(2) Partial metering (approx. 8.5% of viewfinder at center)
(3) Spot metering
• Center spot metering (approx. 2.4% of viewfinder at center)
• AF point-linked spot metering (approx. 2.4% of viewfinder)
• Multi-spot metering (Max. 8 spot metering entries)
(4) Center-weighted average metering
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)
Program AE (shiftable), shutter-priority AE, aperture-priority AE,
manual exposure, E-TTL II autoflash, flash metered manual

ISO speed
(Recommended Exposure Index): 100 - 1600 (1/3- or 1-stop increments), expandable to
ISO 50 (L) and 3200 (H)
Exposure compensation: Manual: ±3 stops in 1/3- or 1/2-stop increments (can be
combined with AEB)
AEB: ±3 stops in 1/3- or 1/2-stop increments

Auto: Applied in One-Shot AF mode with evaluative
metering when focus is achieved
Manual: By AE lock button in all metering modes

• Shutter
Type:
Shutter speeds:
Shutter release:
Self-timer:
Remote control:

Electronically-controlled, focal-plane shutter
1/8000 to 30 sec. (1/3-, 1/2-, and 1-stop increments),
bulb, X-sync at 1/250 sec.
Soft-touch electromagnetic release
10-sec. or 2-sec. delay
Remote control with N3 type terminal

• Drive System
Drive modes:
Continuous shooting
speed (Approx.):
Max. burst:

Single, High-speed continuous, Low-speed continuous,
Self-timer (10 sec. and 2 sec), and Silent single shooting
High-speed continuous: Max. 5 shots/sec.
Low-speed continuous: Max. 3 shots/sec.
JPEG (Large): Approx. 56, RAW: Approx. 12,
RAW+JPEG (Large): Approx. 10
* Based on Canon’s testing conditions with a 2GB CF card
for high-speed continuous shooting with JPEG quality 8,
ISO 100, Standard Picture Style.
* Varies depending on the subject, memory card brand,
image-recording quality, ISO speed, drive mode,
Picture Style, Custom Functions, etc.

• External Speedlite
Compatible flash:
EX-series Speedlites
Flash metering:
E-TTL II autoflash
Flash exposure compensation: ±3 stops in 1/3- or 1/2-stop increments
FE lock:
Provided
External flash settings: Flash function settings, Flash C.Fn settings
PC terminal:
Provided
Zooming to match
lens focal length:
Provided

• Live View Functions
Shooting modes:

(1) Remote Live View shooting
(with a personal computer installed with EOS Utility)
(2) Live View shooting
Manual focus

Metering modes:
Metering range:
Magnified view:
Grid display:
Exposure simulation:

Evaluative metering with the image sensor
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)
Magnifiable by 5x or 10x at AF point
Provided
Provided

• LCD Monitor
Type:
Monitor size:
Pixels:
Coverage:
Brightness adjustment:
Interface languages:

TFT color liquid-crystal monitor
3.0 in.
Approx. 230,000
Approx. 100%
7 levels provided
18

• Image Playback
Display format:

Highlight alert:

Single image, single image + image size, shooting info,
histogram, 4-image or 9-image index, magnified zoom
(approx. 1.5x - 10x), rotated image, jump (by 1/10/100
images, 1 screen, shooting date, or folder)
Provided (Overexposed highlights blink)

• Image Protection and Erase
Protect:

Erase protection of one image, all images in a folder, or
all images in the memory card can be applied or
canceled at one time
One image, all images with checkmarks in a folder, or all
images in the memory card can be erased (except
protected images) at one time

• Sound Recording
Recording method:
File type:
Recording time:

The sound clip recorded with the built-in microphone is
attached to the image
WAV
Max. 30 sec. per sound clip

• Direct Printing
Compatible printers:
Printable images:

PictBridge-compatible printers
JPEG images compliant to Design rule for Camera File
System (DPOF printing possible) and RAW/sRAW
images captured with the EOS-1Ds Mark III

• Digital Print Order Format
DPOF:

Version 1.1 compatible

• Direct Image Transfer
Compatible images:

JPEG and RAW/sRAW images
* Only JPEG images can be transferred as wallpaper on
the personal computer screen

• Customization
Custom Functions:
C.Fn setting registration:
My Menu registration:
Save camera settings:
Register basic
camera settings:

Total 57
Provided
Provided
Provided
Provided

• Interface
USB terminal:

For personal computer communication and direct printing
(USB 2.0 Hi-Speed)
Video OUT terminal:
NTSC/PAL selectable
Extension system terminal: For connection to WFT-E2/E2A

• Power Source
Battery:
Battery life:

Battery check:
Power saving:
Date/Time battery:
Startup time:

Battery Pack LP-E4 (Quantity 1)
* AC power can be supplied via AC Adapter Kit ACK-E4
At 23°C / 73°F: Approx. 1800 shots
At 0°C / 32°F: Approx. 1400 shots
* With fully-charged Battery Pack LP-E4
* Without Live View shooting
* The figures above are based on CIPA (Camera &
Imaging Products Association) testing standards
Automatic (Displayed in 6 levels)
* Detailed battery information provided
Provided. Power turns off after 1, 2, 4, 8, 15, or 30 min.
One CR2025 lithium battery
Approx. 0.2 sec.

• Dimensions and Weight
Dimensions (W x H x D): 156 x 159.6 x 79.9 mm / 6.1 x 6.3 x 3.1 in.
Weight (Approx.):
1210 g / 42.7 oz. (Body only)

• Operating Environment
Working temperature
range:
Working humidity:

0°C - 45°C / 32°F - 113°F
85% or less

• Battery Pack LP-E4
Type:
Rated voltage:
Battery capacity:
Dimensions (W x H x D):
Weight (Approx.):

Rechargeable lithium ion battery
11.1 V DC
2300mAh
68.4 x 34.2 x 92.8 mm / 2.7 x 1.3 x 3.7 in.
180 g / 6.3 oz. (excluding protective cover)

• Battery Charger LC-E4
Type:
Recharging time:
Rated input:

Charger dedicated to the Battery Pack LP-E4
Approx. 120 min. (for 1 pack)
100 - 240 V AC (50/60 Hz)
12 V / 24 V DC
Rated output:
12.6 V DC, 1.55 A
Power cord length:
Approx. 2 m / 6.6 ft.
Working temperature: 0°C - 40°C / 32°F - 104°F
Working humidity:
85% or less
Dimensions (W x H x D): 155 x 52.3 x 95 mm / 6.1 x 2.1 x 3.7 in.
Weight (Approx.):
340 g / 12.0 oz. (excluding power cord and protective covers)

• AC Adapter Kit ACK-E4
[DC Coupler]
Rated input:
Rated output:
Cord length:
Working temperature:
Working humidity:
Dimensions (W x H x D):
Weight (Approx.):
[AC Adapter]
Rated input:
Rated output:
Power cord length:
Working temperature:
Working humidity:
Dimensions (W x H x D):
Weight (Approx.):

12.6 V DC
11.1 V DC
Approx. 2.3 m / 7.5 ft.
0°C - 45°C / 32°F - 113°F
85% or less
68.4 x 34.2 x 92.8 mm / 2.7 x 1.3 x 3.7 in.
165 g / 5.8 oz. (excluding protective cover)
100 - 240 V AC (50/60 Hz)
12.6 V DC, 2 A
Approx. 2 m / 6.6 ft.
0°C - 45°C / 32°F - 113°F
85% or less
64.5 x 32.6 x 106 mm / 2.5 x 1.3 x 4.2 in.
185 g / 6.5 oz. (excluding power cord)

All specifications above are based on Canon’s testing standards.
The camera’s specifications and exterior are subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the
respective lens maker.

Trademarks
Adobe is a trademark of Adobe Systems Incorporated.
Windows is a trademark or registered trademark of Microsoft Corporation in
the United States and other countries.
Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in
the United States and other countries.
CompactFlash is a trademark of SanDisk Corporation.
The SDHC logo is a trademark.
All other corporate and product names and trademarks mentioned in this
manual are the property of their respective owners.
* This digital camera supports Design rule for Camera File System 2.0 and Exif
2.21 (also called “Exif Print”). Exif Print is a standard that enhances compatibility
between digital cameras and printers. By connecting to an Exif Print-compliant
printer, the shooting information is incorporated to optimize the print output.

Digital Camera Model DS126161 Systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
class B digital devices, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be used
with this equipment in order to comply with Class B limits in Subpart B of Part
15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
This digital apparatus does not exceed the Class B limitsfor radio noise
emissions from digital apparatus as set outin the interference-causing
equipment standard entitled "Digital Apparatus", ICES-003 of the Industry
Canada.
When connecting to and using a household power outlet, use only AC
Adapter Kit ACK-E4 (rated input: 100-240 V AC 50/60 Hz, rated output:
12.6 V DC). Using anything else can cause fire, overheating, or
electrical shock.

IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS — This manual contains important safety
and operating instructions for Battery Charger LC-E4.
2. Before using the charger, read all instructions and cautionary remarks on
(1) the charger, (2) the battery pack, and (3) the product using the battery
pack.
3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E4.
Other types of batteries may burst, causing personal injury and other
damage.
4. Do not expose the charger to rain or snow.
5. Use of an attachment not recommended or sold by Canon may result in
fire, electric shock, or personal injury.
6. To reduce risk of damage to electric plug and cord, pull by plug rather than
by cord when disconnecting charger.
7. Make sure cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
8. Do not operate the charger with damaged cord or plug - replace them
immediately.
9. Do not operate the charger if it has received a sharp blow, been dropped,
or otherwise damaged in any way; take it to a qualified serviceman.
10. Do not disassemble the charger; take it to a qualified serviceman when
service or repair is required. Incorrect reassembly may result in a risk of
electric shock or fire.
11. To reduce risk of electric shock, unplug charger from outlet before
attempting any maintenance or cleaning.
MAINTENANCE INSTRUCTION
Unless otherwise stated in this manual, there are no user serviceable parts
inside. Refer servicing to qualified serviceman.

USA and Canada only:
The Lithium ion/polymer battery that powers the product is
recyclable. Please call 1-800-8-BATTERY for information on
how to recycle this battery.

For CA, USA only
Included lithium battery contains Perchlorate Material – special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.

Index
A
AC adapter................................23, 31
Access lamp .............................18, 34
Adjust levels..................................144
Adobe RGB.....................................72
AE ...................................................92
AE lock..........................................101
AEB...............................................100
AF ...........................................85, 167
AF microadjustment......................169
AF mode .........................................82
AF point ..........................................84
AF point activation area ................170
AF point brightness.......................172
AF point display ............................118
AF point expansion .......................170
AF point linked ..............................160
AF start (AF-ON).......................36, 82
AF stop button ..............................173
AF-assist beam.....................107, 172
AI Servo AF ....................................83
AI Servo AF tracking method........167
AI Servo characteristics ................166
Amber (A) ...............................70, 144
Aperture ..........................................96
Aperture value range ....................161
Aperture-priority AE (Av).................96
Apply shooting/metering mode .....162
Area AF...........................................81
Aspect ratio...................................178
Assist AF points ..............................85
Auto cleaning ................................132
Auto image rotation.......................130
Auto power off.................................47
Auto reset .......................................80
Auto switch media...........................74
Auto white balance .........................63

Automatic AF point selection.......... 84
Automatic AF point selection
disabled........................................ 171
Av ................................................... 96
AWB ............................................... 63

B
B/W .............................................. 142
B/W image...................................... 58
Backup ........................................... 43
Battery................................ 22, 26, 29
Battery charger......................... 22, 26
Battery check ......................... 29, 187
Battery compartment cap ............... 29
Battery info. .................................. 187
Beeper...................................... 43, 83
Blue (B) .................................. 70, 144
Borders......................................... 141
Both.............................................. 148
Bracketed shots ........................... 159
Bracketing auto cancel................. 159
Bracketing sequence.................... 159
Brightness .................................... 144
Brightness display ........................ 118
Bulb .............................................. 102
Bulb exposure .............................. 102
Bundled items .................................. 3
Bundled software .................CD-ROM

C
C.Fn ............................................. 158
Calibration ...................................... 28
Camera direct printing.......... 137, 150
Camera setting display................. 186
Camera shooting-ready.................... 4
Camera-assigned name................. 77
Caption (name) .............................. 67
Car battery cable.................... 28, 194

Center-weighted average
metering ..........................................91
CF card .........................13, 32, 47, 73
CF card slot.....................................32
Clean manually .............................135
Clean now .....................................132
Clear all camera settings ................49
Clear all Custom Functions...........156
Close-up (macro) photography .....104
Cloudy.............................................63
Color balance................................144
Color saturation.......................59, 144
Color space.....................................72
Color temperature ...........................69
Color tone ...............................59, 144
Compensation for damages..............2
Compression rate............................55
Continuous numbering....................79
Continuous shooting ...............87, 172
Continuous shooting limit..............172
Contrast ..................................58, 144
Cool tone.......................................142
Copying images ............................125
Copyrights.........................................2
Cross-type points ............................85
Custom Function list .....................157
Custom Function setting
registration ....................................179
Custom Functions .........................158
Custom WB (white balance) ...........64
Customization ...............................155

D
Date/File number imprinting..........143
Date/time setting .............................46
Daylight ...........................................63
DC coupler ................................23, 31
Default...........................................141

Depth-of-field preview .................... 97
Design rule for Camera File
System ......................................... 203
Difficult-to-focus subjects ............... 86
DIGITAL terminal.................. 138, 152
Direct printing ....................... 137, 150
Direct transfer............................... 151
Discharging .................................... 28
Display entire image..................... 112
Display formats............................. 116
DPOF ........................................... 137
DPP .............................................. 133
Drive mode ..................................... 87
Dust Delete Data .......................... 133

E
EF lenses ....................................... 35
Electronic MF ............................... 166
EOS Utility .................................... 152
Erase ............................................ 128
Erasing all images ........................ 128
Erasing all images in a card ......... 128
Erasing all images in a folder ....... 128
Error codes................................... 193
E-TTL II autoflash......................... 105
E-TTL II flash metering................. 164
Evaluative metering........................ 90
Exif ............................................... 203
Exposure compensation................. 99
Exposure level increments ........... 158
Exposure level indicator ................. 21
Exposure simulation ..................... 178
EX-series Speedlite ...................... 105
Extension system terminal ............. 18
External media ......................... 20, 43
External Speedlite ........................ 105
External Speedlite control............. 106
Eyecup ........................................... 39

Eyepiece .........................................17
Eyepiece shutter ...........................103

F
Face brightener.............................144
Faithful ............................................57
FE lock..........................................105
FEB...............................................105
File extension..................................78
File name ........................................77
File number.....................................79
File size...........................................53
Filter effect ......................................60
Firmware.........................................45
Flash .............................................105
Flash Custom Functions ...............106
Flash exposure compensation......105
Flash function settings ..................106
Flash off ........................................165
Flash sync speed..........................162
Flash use ........................................63
Flash-sync contacts ........................17
Focal plane mark ............................17
Focus adjustment .........................169
Focus confirmation light..................21
Focus lock.......................................83
Focus mode switch ...........35, 86, 110
Focus tracking ................................83
Focusing frame .....................112, 114
Focusing screen ...........................176
Folder (Create/Select) ....................75
Format ......................................47, 49
4- or 9-image index display...........119
FP flash.........................................105

G
Green (G)................................70, 144
Grid display...................................114

H
Hand strap...................................... 24
Handling precautions ..................... 12
Hard disk-type card .......... 33, 34, 109
High ISO speed noise reduction .. 163
Highlight alert ............................... 118
Highlight tone priority ................... 164
High-speed continuous shooting.... 87
High-speed sync .......................... 105
Histogram............................. 114, 118
Hold.............................................. 129
Holding the camera ........................ 40
Horizontal-line sensitive ................. 85
Hot shoe......................................... 17
Household power outlet ........... 23, 31

I
ICC profile ...................................... 72
Image browsing (Jump display) ... 119
Image processing........................... 54
Image protect ............................... 123
Image-recording quality.................. 52
Image review time ........................ 129
Image size...................................... 52
Image size automatic appending ... 78
Image transfer .............................. 151
Index ............................................ 148
Index display ................................ 119
INFO............................. 114, 117, 186
Interface cable...................... 138, 152
ISO speed ...................................... 56
ISO speed increments.................. 158
ISO speed range (extension) ....... 158

J
JPEG.............................................. 52
JPEG quality .................................. 55
Jump by 1 screen......................... 119

Jump by 1/10/100 images.............119
Jump by date ................................119
Jump by folder ..............................119
Jump display .................................119

L
Landscape ......................................57
Language ........................................46
Large...............................................52
LCD brightness .............................129
LCD monitor....................................13
LCD panel ...........................13, 19, 20
LCD panel illumination ..................102
Lens ..........................................13, 35
Live View shooting ........................110
Long exp. noise reduction.............163
Low level format..............................49
Low-speed continuous shooting .....87

M
M (Manual)......................................98
Macro photography .......................104
Magenta (M)............................70, 144
Magnified view ......................112, 120
Magnified view starting position ....120
Main Dial .....................................4, 37
Malfunction....................................190
Manual AF point selection...............84
Manual exposure (M) ......................98
Manual focusing..............................86
Manual reset ...................................80
Maximum burst .........................53, 54
Medium ...........................................52
Memory card (CF/SD)...13, 32, 47, 73
Memory card slot cover...................32
Menu settings..................................43
Menus .......................................41, 43
Metering mode ................................90

MF .................................................. 86
Mirror lockup......................... 104, 172
Monochrome .................................. 58
Multi-controller............................ 4, 38
Multi-spot metering......................... 91
My Menu....................................... 181

N
Name (Caption) .............................. 67
Natural.......................................... 142
Neutral............................................ 57
New images.................................. 153
19 points/9 points (inner/outer)..... 170
Noise reduction ............................ 163
Nomenclature ................................. 16
Non-Canon flash .......................... 108
NR ................................................ 142
NTSC...................................... 44, 122

O
One-Shot AF .................................. 82
Original decision
(image verification) data ............... 178
Overwrite ...................................... 127

P
P (Program).................................... 92
Page layout .................................. 141
PAL......................................... 44, 122
Paper settings .............................. 140
Partial metering .............................. 90
PC terminal................................... 108
Personal white balance .................. 63
PictBridge ..................................... 137
Picture Style ............................ 57 - 62
Playback....................................... 116
Playback menu......................... 41, 43
Portrait............................................ 57
Possible shots .................. 30, 53, 114

Power cord..........................22, 26, 31
Power source......................26, 31, 47
Power Switch ..................................36
Pressing completely........................37
Pressing halfway.............................36
Print copies ...........................143, 149
Print order (DPOF)........................137
Print settings .................................140
Printer errors.................................146
Printing effects ......................142, 144
Program AE (P) ..............................92
Program Line ................................189
Program shift ..................................93
Protect ..........................................123
Protect all images .........................123
Protecting all images in a card......123
Protecting all images in a folder....123
Protective cover ..............................26

Q
Quick Control Dial.................4, 17, 38

R
RAW .........................................52, 54
RAW(sRAW)+JPEG........................52
Rear LCD panel ........................13, 20
Rec. separately...............................74
Rec. to multiple ...............................74
Recharge ........................................26
Recording func................................74
Recording media
(CF/SD cards)...............13, 32, 47, 73
Red-eye corr. ................................144
Reduction......................................120
Registering basic camera
settings .........................................184
Release time lag ...........................177
Remote control terminal................103

Remote Live View shooting.......... 110
Remote switch.............................. 103
Replacing the date/time battery ... 188
RGB display ................................. 118
Rotate................................... 121, 130

S
Safety shift ................................... 160
Safety warnings.............................. 10
Saving camera settings................ 182
SD card ........................ 13, 32, 47, 73
SD card slot.................................... 32
Select all images .................. 149, 154
Select card ..................................... 73
Select usable metering modes..... 161
Select usable shooting modes ..... 160
Self Cleaning Sensor Unit ............ 131
Self-timer........................................ 88
Sensor cleaning ........... 131, 132, 135
Sepia .............................................. 60
Set................................................ 179
SET button ................................. 4, 41
SET button when shooting ........... 174
Set-up menu............................. 41, 44
Shade............................................. 63
Sharpness ...................................... 58
Shoot w/o card ............................... 43
Shooting information display ........ 117
Shooting menus ....................... 41, 43
Shooting mode ............................... 19
Shutter button................................. 36
Shutter curtain sync. .................... 164
Shutter speed................................. 94
Shutter speed range..................... 161
Shutter-priority AE (Tv) .................. 94
Silent single shooting ..................... 87
Single image ........................ 149, 154

Single image display .....................116
Single image erase .......................128
Single image playback ..................116
Single image protection ................123
Single shooting ...............................87
Skip ...............................................127
Small ...............................................52
Software instruction
manual ................................. CD-ROM
Sound clip .....................................124
Sound recording............................124
Specifications ................................196
Speedlite .......................................105
Spot metering..................................90
sRAW........................................52, 54
sRGB ..............................................72
Standard............................57, 74, 148
Strap ...............................................24
Style ................................................57
Subject tracking sensitivity............166
Superimposed display...................172
System map ..................................194

T
Temperature increase ...................109
Timer.................................................4
Timer length ..................................177
Toning effect....................................60
Top LCD panel ..........................13, 19
Trademarks...................................203
Transfer all images .......................153
Transfer order ...............................154
Transfer order images...................153
Trimming .......................................145
Tungsten light .................................63
Tv ....................................................94
Type I/II ...........................................33

U
Ultra DMA (UDMA)......................... 53
Underscore............................... 72, 76
User Defined ............................ 58, 61

V
Vertical............................................ 39
Vertical- and
horizontal-line sensitive .................. 85
Vertical Shooting ............................ 39
Vertical-line sensitive...................... 85
Video cable........................... 122, 195
Video OUT.............................. 44, 122
Viewfinder....................................... 21
Vivid.............................................. 142

W
Wallpaper ..................................... 153
Warm tone .................................... 142
WAV.............................................. 124
WB (white balance) ........................ 63
WB-BKT ......................................... 71
Web site ....................................... 137
WFT.................................... 20, 43, 45
White balance................................. 63
White balance bracketing ............... 71
White balance correction................ 70
Wireless, Multiple-Speedlite
System ......................................... 105

X
xx-up............................................. 141

CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.

CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-OK-CANON

CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-OK-CANON

EUROPE,
AFRICA &
MIDDLE EAST

CANON EUROPA N.V.
Bovenkerkerweg 59-61, P.O. Box 2262, 1180 EG Amstelveen, The Netherlands
CANON COMMUNICATION & IMAGE FRANCE S.A.S.
12 Rue de l’Industrie 92414 Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8 I-20097 San Donato Milanese, Milano, Italy
CANON Schweiz AG
Geschäftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, Switzerland
CANON GMBH
Zetschegasse 11, A-1230 Wien, Austria
CANON España, S. A.
C/Joaquín Costa, 41, 28002 Madrid, Spain
SEQUE Soc. Nac. de Equip., Lda.,
Praça da Alegria, 58, 2°, 1269-149 Lisboa, Portugal

CENTRAL &
SOUTH AMERICA

CANON LATIN AMERICA, INC.
703 Waterford Way, Ste. 400 Miami, FL 33126, U.S.A.

CANON (China) Co., Ltd.
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Startower Bldg.17F,737,Yeoksam-Dong, Kangnam-Ku, Seoul, 135-984, Korea

CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand

CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan

This Instruction Manual booklet is current as of August 2007. For information on
the camera’s compatibility with any accessories and lenses introduced after this
date, contact any Canon Service Center.

© CANON INC. 2007

PRINTED IN JAPAN

Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-701 Light Source : Unknown Producer : Acrobat Distiller 5.0.5 (Windows) Keywords : Create Date : 2007:07:30 05:17:05Z Modify Date : 2007:08:31 08:43:19+09:00 Metadata Date : 2007:08:31 08:43:19+09:00 Creator Tool : PScript5.dll Version 5.2.2 Document ID : uuid:d3ac139d-114d-43e0-87db-12a8edafc809 Instance ID : uuid:739a6177-89b6-468d-a20d-52f8411257ea Format : application/pdf Has XFA : No Page Count : 212 Creator : PScript5.dll Version 5.2.2
EXIF Metadata provided by EXIF.tools

Navigation menu

Upload a User Manual

Versions of this User Manual:

Wiki Guide

HTML

Mobile

Download & Help

Views

User Manual

Discussion / Help

Navigation

© 2026 UserManual.wiki

Contact Us

DMCA