Canon Imageformula Dr G1100 Production Scanner Users Manual G1130 1100 User

2015-03-09

• Preface
  • Manuals for the Scanner
  • Symbols Used in This Manual
  • How This Manual is Organized
• Hardware
  • Table of Contents
  • Before You Start Using the Scanner
    • 1. Important Safety Instructions
      • Installation Location
      • Power
      • Moving the Scanner
      • Handling
      • Disposal
    • 2. Features
    • 3. Names and Functions of Parts
      • Front View, Feeder Inlet, and Eject Outlet
      • Rear View
      • Control Panel
  • Setup
    • 1. Setup Procedures
    • 2. Installation Requirements
    • 3. Software Installation
    • 4. Connecting the Scanner to the Computer
      • Interface Connector Locations
      • Connecting the Scanner to the Computer
    • 5. Turning the Power ON
      • Turning Off the Power
  • Basic Operation
    • 1. Documents
      • Acceptable Documents
      • Long Document Mode Setting
    • 2. Document Feed and Eject Trays
      • Preparing the Document Feed Tray
      • Adjusting the Document Guides
      • Preparing the Document Eject Tray
    • 3. Document Feeding Methods
      • Selecting the Document Feeding Method
    • 4. Scanning
      • About the Job Function
      • CapturePerfect 3.1
    • 5. Using Patchcode Sheets (Option)
      • About Patchcode Sheets
      • How to Use Patchcode Sheets
    • 6. Handling Interruptions in Scanning
      • Check Error Message on Control Panel
      • Handling Paper Jams, Skewed Documents, and Staples
      • Handling a Double Feed
  • Other Functions
    • 1. Function Description
    • 2. User Mode
      • User Mode Operating Procedure
    • 3. User Mode Functions
  • Maintenance
    • 1. Regular Maintenance
      • Cleaning the Scanner
      • Cleaning the Sensors
      • Opening and closing the upper unit
      • Cleaning the Scanning Glass, Roller, and Pad
      • Adjusting the Compression
      • Auto Power OFF Function
      • Power Outlet
    • 2. Replacing the Transport Rollers
      • Roller Replacement Cycle
      • Checking and Resetting the Page Counter
      • Removing and Reinstalling the Rollers
    • 3. Detaching and attaching the separation pad (retard roller cover)
      • When to replace the separation pad (retard roller cover)
      • Detaching and attaching the separation pad (retard roller cover)
    • 4. Imprinter Ink Cartridge Replacement and Cleaning
      • About the Imprinter
      • Replacing Ink Cartridges
      • Specifying the Printing Position
      • Cleaning the Imprinter
      • Imprinter Testing
  • Practical Examples
    • 1. Messages
      • Status Display
      • Error Messages
    • 2. Troubleshooting
      • Trouble Categories
      • Problem and Solution
    • 3. Uninstalling the Software
  • Appendix
    • 1. Specifications
      • Unit Specifications
      • Options
      • Consumables
      • External Dimensions
    • 2. Option Specifications
      • Barcode Specifications
      • Imprinter Specifications
    • 3. Index
• Software
  • Table of Contents
  • ISIS/TWAIN Driver Settings
    • 1. ISIS/TWAIN Driver Settings Dialog Box
      • Dialog box buttons
      • [Basic] Tab Sheet
      • [Brightness] Tab Sheet
      • [Image processing] Tab Sheet
      • [Feeding] Tab Sheet
      • [Others] Tab Sheet
      • [Imprinter/Addon Dialog] Tab Sheet
  • Job Registration Tool Settings
    • 1. Before Use
      • Job Function
      • Starting the Job Registration Tool
    • 2. Job Registration Tool
    • 3. Settings Dialog Boxes
      • [New/Editing] Dialog Box
      • [Admin] Dialog Box
  • Practical Examples
    • 1. Practical Examples
      • Scanning Documents of Unregistered Page Sizes
      • Specifying the Scanning Area
      • Configuring Scanner Settings According to the Purpose
      • Registering Your Settings