Canon Imagerunner Advance C9065S Pro Operation Manual C9075S PRO/C9065S Operating Information

2015-03-09

• Contents
• Chapter 1 Preface
  • Trademarks
  • Copyright
  • Notes for the reader
  • Abbreviations used in this manual
  • Available documentation
• Chapter 2 Main parts
  • Overview of the machine configuration
  • The paper module
  • Bulk paper modules
  • The automatic document feeder (ADF)
  • The operator panel
  • The operator attention light
  • The copy tray
  • Stacker/stapler and integrated punch unit
  • The puncher
  • Inserter
  • Folder
• Chapter 3 Operating concept
  • Operating concept
  • Access the Settings Editor
  • Maintain the 'Media catalog'
  • Maintain the 'Media families'
  • Maintain the 'Color pre-sets'
  • Maintain the 'Input profiles'
  • Maintain the 'Output profiles'
  • Maintain the 'Spot colors'
  • Prepare print jobs with PRISMAprepare
  • Prepare print jobs with the printer driver
  • Manage production printing
• Chapter 4 Operator panel views
  • The dashboard
  • The 'Schedule' view
  • The 'Jobs' view
  • The 'Trays' view
  • The 'System' view
• Chapter 5 Power information
  • The power buttons and power modes
  • Turn on the controller
  • Turn on the printer
  • Turn off the printer
  • Use the Sleep mode
• Chapter 6 Print jobs
  • General information
    • Introduction to the print function
    • Description of the print job settings
    • Contradiction handling
  • Manage print jobs
    • Print an urgent job immediately
    • Give priority to a print job
    • Print a scheduled job later
    • Reprint a job
    • Print a job ticket
    • Make a proof
    • Stop the printer
    • Delete print jobs
    • Schedule a waiting job for printing
    • Select more than one job for printing
    • Print a file from a USB drive
  • Media handling
    • Introduction to the 'Schedule' view
    • Load the media using the 'Schedule' view
    • Description of the 'Trays' view
    • Load the media using the 'Trays' view
    • Introduction to the 'Media' section
    • Introduction to the media handling
    • Add temporary media to the 'Media catalog'
    • Perform a media registration
  • Change the job settings before printing
    • Change the number of sets
    • Check the first set
    • Change the use of separator sheets
    • Stack the prints with an offset
    • Combine jobs
  • Change the output settings before printing
    • Change '2-sided' into '1-sided' and vice versa
    • Change the binding edge
    • Select a different media for a job
    • Change the settings for covers
    • Shift the image roughly to create binding space
    • Shift the image precisely to create binding space or correct the layout
    • Change the print delivery settings
    • Change the finishing method
• Chapter 7 Copy jobs
  • General information
    • Introduction to the copy function
    • Description of the copy job settings
    • Feeding originals into the ADF
    • Put originals on the glass plate
  • Copy your documents
    • Make a copy
    • Combine subsets into 1 document
    • Access other functions during a copy job or scan job
    • The zoom behavior
    • Create and use custom copy templates
    • Rename a copy job
    • Copy non-standard size originals
    • Scan now and print later (postponed copying)
    • Finish the output
    • Adjust the image to improve the copy and scan quality
• Chapter 8 Scan jobs
  • Introduction to the scan function
  • Description of the scan job settings
  • Scan to file
  • Scan to USB
  • Combine subsets into one file
• Chapter 9 Paper, toner, and staples
  • Consumables
  • Loading paper
    • Load the media into the integrated paper trays
    • Adjust the integrated paper tray to hold a different paper size.
    • Load the media into the paper module
    • Adjust the media size for the paper module
    • Load the media into the bulk paper modules
    • Adjust the media size for the bulk paper module
    • Load the media into the inserter
    • Load the media into the special feeder (multipurpose tray)
    • Loading transparencies
    • Loading tab paper
    • Load tab paper into the paper tray
  • Removing paper waste
    • Check the status of the punch waste box
    • Remove the punch waste of the punch unit
    • Remove the trim waste
  • Toner
    • Check the status of the toner reservoir and waste toner container
    • Replace the toner cartridge
  • Staples
    • Check the status of the staple cartridges
    • Replace the staple cartridge in the stapler unit
    • Replace the staple cartridge in the saddle stitch unit
• Chapter 10 Adapt printer settings to your needs
  • System settings (access through the operator panel)
    • Introduction to the 'Setup' section
    • Work with the workflow profiles
    • Change the warning time
    • Disable the warning time
    • Truncate the job name
    • Adjust the brightness and contrast of the operator panel
    • Access Settings Editor settings via the operator panel
  • Automated workflows (access through the Settings Editor)
    • Introduction to automated workflows
    • Add an automated workflow
    • Edit an automated workflow
    • Delete an automated workflow
    • Restore the factory default workflow
  • Hotfolders
    • Introduction to hotfolders
    • Activate the hotfolder function
    • Create a hotfolder
    • Create a shared network folder on a workstation
    • Create a hotfolder default ticket ('default_ticket.jdf')
• Chapter 11 Maintenance and calibration
  • Introduction to the 'Maintenance' section
  • Routine cleaning
    • Introduction
    • Clean the glass plate and underside the feeder
    • Clean the automatic document feeder (ADF)
    • Clean the wire
    • Clean the roller
    • Clean the automatic document feeder rollers
    • Clean the drum
    • Clean the operator panel
  • Maintenance
    • Reset the day counters
    • Find the meter readings (counters)
    • Handle paper jams
    • 'Auto color mismatch correction'
  • Calibration
    • Introduction to printer calibration
    • Calibrate the printer - '1. Shading correction'
    • Calibrate the printer - '2. Auto gradation adjustment'
    • Calibrate the controller - '3. Media family calibration'
    • Adjust the CMYK calibration curve manually
• Chapter 12 Specifications
  • Specifications
• Chapter 13 Third party software
  • Third Party Software
  • The Software Subjected to the Other Conditions
  • The Apache Software License, Version 1.1
  • Bouncy Castle License
  • dump/restore
  • MIT License
  • fontconfig
  • The FreeType Project LICENSE
  • J2ME
  • libpng
  • Adobe Flash Player (in NetFront)
  • The BSD License
  • MSTLIB
  • Java Servlet Implementation Classes Version 2.1.1 Binary Code License
  • GNU GENERAL PUBLIC LICENSE
  • GNU LESSER GENERAL PUBLIC LICENSE
  • Eclipse Public License - v 1.0
  • COMMON PUBLIC LICENSE Version 1.0