Canon Pixma Mp610 Instruction Guide
2015-03-09
: Canon Canon-Pixma-Mp610-Instruction-Guide-589438 canon-pixma-mp610-instruction-guide-589438 canon pdf
Open the PDF directly: View PDF .
Page Count: 2
![](asset-1.png)
Start Here
Easy Setup Instructions
Photo All-In-One
Unpack the Machine Please conrm the included items against the illustration printed on the lid of the packing box.
A USB cable is necessary to connect the machine with your computer.
•
•
1 Prepare the Machine
a Open the Paper Output Tray with your hands,
and take out the Print Head and ink tanks.
Caution
Before turning on the machine, remove all the orange shipping
tapes.
Print Head
Ink Tanks
Important
The Print Head and ink tanks are placed inside of the Paper
Output Tray.
b Plug the power cord in the back of the machine
and connect the other end to the wall outlet.
Next, open the Sheet Feeder Cover, pull out
the Paper Support, then open the Output Tray
Extension.
Document Cover
Important
Make sure that the Document Cover is closed.
c Open the Operation Panel, then press the ON/
OFF button to turn on the machine.
d Use the { or } button on the Operation Panel to
select the language for the LCD, then press the
OK button.
(1) Press the { or }
button to select the
language.
(2) Press the OK
button.
Important
If an unintended language is displayed on the LCD, press the
Back button to return to the Language selection screen.
Once the message “Install the print head and set the ink
tank.” appears, go to e.
e Lift the Scanning Unit (Printer Cover) until it locks
into place. The Print Head Holder moves to the
center.
Important
For your safety, always firmly grip the areas illustrated when
lifting the Scanning Unit (Printer Cover).
Lift the Document Cover and Scanning Unit (Printer Cover)
together.
f Open the Inner Cover. Write down the serial
number located inside the machine. You will need
this to register your product.
Inner Cover Serial Number Location
•
•
a Remove the Print Head from its package.
Caution
There may be some transparent or light blue ink on the inside
of the bag the print head comes in, or the inside of the protec-
tive cap - this has no effect on print quality. Be careful not to
get ink on yourself when handling these items.
b Remove the orange protective cap from the Print
Head and discard it.
Protective Cap
Print Head Nozzles
Electrical Contacts
Note
Do not touch the print head nozzles or the electrical contacts.
cFirmly raise the Print Head Lock Lever until it
stops.The Print Head Lock Lever may feel heavy.
dInsert the Print Head.
Do not touch!
e Push the Print Head to hold it in place, and lower
the Print Head Lock Lever.
Important
If the Scanning Unit (Printer Cover) is left open for more than
10 minutes, the Print Head Holder moves to the right. Close
and reopen the Scanning Unit (Printer Cover) to return the
Holder to the center.
3 Install the Ink Tanks
Note
For the ink tanks compatible with this machine, refer to the back
cover of the Quick Start Guide.
a Pull the orange tape in the direction of the arrow
to peel off the protective lm and remove the lm
completely.
If the air hole is blocked with the remaining lm, ink
may leak out or may not eject properly.
b Twist off and discard the orange protective cap
located on the bottom of the ink tank.
Electrical Contacts
Ink Port
Protective Cap
Do not press!
Important
Do not touch the electrical contacts.
Do not touch the ink port.
c Insert the ink tank into the right-hand slot and
press the mark on the ink tank until it clicks
into place.
d Make sure the ink lamp lights red.
Refer to the color
guide on the Print
Head Lock Lever.
e Close the Inner Cover and the Scanning Unit
(Printer Cover).
Important
For your safety, always firmly grip the areas illustrated when
closing the Scanning Unit (Printer Cover).
The machine starts the preparatory operation. It takes about 2
minutes. Do not start another operation until the machine has
stopped making operating noises.
•
•
•
•
a Pinch the Paper Guide and slide it to the left end.
Paper Support
Extension
Paper Guide
b Load two sheets of supplied paper (MP-101) into
the Rear Tray with the printing side (whiter side)
facing up, align the paper with the Cover Guide
on the right side, then slide the Paper Guide
against the paper stack.
Paper Guide
Cover Guide
Print Side
cMake sure that Yes is selected in the message
requesting head alignment, then press the OK
button.
Note
Print Head alignment takes about 13 minutes to complete. Do
not start another operation until the machine has stopped making
operating noises.
The pattern is printed. And Print Head is aligned
automatically.
OK
Note
The pattern is printed in black and blue.
When Automatic Print Head Alignment cannot be executed
correctly, the message “Auto head align has failed.” is displayed
on the LCD. Refer to “An Error Message is Displayed on the LCD”
in the Quick Start Guide.
Hardware setup and Print Head alignment are
complete.
•
•
2 Install the Print Head 4 Align the Print Head
Important
When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the Quick Start Guide.
![](asset-2.png)
Windows
Macintosh
XXXXXXXX PRINTED IN THAILAND
Windows® Software Installation
Note
The screens below refer to Windows Vista™ operating system Ultimate Edition
(hereafter referred to as “Windows Vista”) installation.
Screens may vary depending on the operating system you are using.
Log into a user account with the administrator privilege.
Before installing the driver, disable all anti-virus programs and automatically loading
programs.
A message asking for your confirmation to restart your computer may appear
during the installation process. If this message is displayed, follow the on-screen
instructions and click OK.
The installation resumes from where it left off when your computer has been
restarted.
If the computer is restarted during installation, do not remove the Setup CD-ROM
during restarting.
a Be sure to TURN THE MACHINE OFF before continuing.
(1) Press the ON/OFF button.
(2) Make sure that the Power lamp stops ashing.
b Turn the computer on and start Windows.
Important
If the Found New Hardware or Found New Hardware Wizard screen appears
automatically, remove the USB cable connected to your computer. Click Cancel
to quit the screen. In Windows Vista, the screen may close automatically when
the USB cable is unplugged. Then turn off the machine and proceed from step
c to install the MP Drivers.
c Insert the Setup CD-ROM. The setup program should run
automatically.
In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to
Step f.
d If the AutoPlay screen appears, click Run Msetup4.exe.
e If the User Account Control screen appears, click Continue.
If the same screen reappears in subsequent steps, click
Continue.
f When the main menu appears, click Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed the installation.
•
•
•
•
•
g When the list of applications to install appears, conrm the
contents and click Install.
Note
Move the cursor over items to display explanations of each application.
h Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
i When the Printer Connection screen appears, connect
one end of the USB cable to the computer, the other to the
machine, then TURN THE MACHINE ON. The software will
begin identifying the printer port being used.
Important
If you cannot go to the next procedure after three minutes, refer to “Trouble-
shooting” instructions in the Quick Start Guide.
To Computer
→
USB
j When the Setup Complete screen appears, click Next.
k When the User Registration screen appears, click Next.
Note
To register later, click Cancel and go to Step l. After software installation is complete,
double-click on the desktop.
Follow the on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1- f on the front page.
l When the PIXMA Extended Survey Program screen
appears, conrm the message. We would appreciate it if you
would take part in this program regarding the use of Canon
printers. If you can agree, click Agree.
m When the Installation completed successfully screen
appears, click Exit.
After clicking Exit, remove the CD-ROM.
If Restart is displayed, make sure that the Restart the system now
(recommended) check box is selected, then click Restart.
Remove the CD-ROM after clicking Restart and restarting the computer.
Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
Software installation is now complete.
Macintosh® Software Installation
Note
Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier
are not supported, do not connect the machine to these.
The screens below refer to Mac OS X v.10.4.x installation. Screens may vary
depending on the operating system you are using.
Log on as an Administrator.
Before installing the driver, disable all anti-virus programs and automatically loading
programs.
a Connect one end of the USB cable to the computer, the other
to the machine.
Note
Make sure the machine is turned on.
USB
b Turn on your Mac and insert the Setup CD-ROM.
Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
on the desktop.
c Double-click the Setup icon.
d When the Authenticate screen appears, enter your
administrator name and password. Click OK.
If you do not know your administrator name or password, click
, then follow the on-screen instructions.
e When the main menu appears, click Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed the installation.
f When the list of applications to install appears, conrm the
contents, then click Install.
Note
Move the cursor over items to display explanations of each application.
g Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
h When the Setup Complete screen appears, click Next.
•
•
•
•
i When the User Registration screen appears, click Next.
Note
To register later, click Cancel and go to Step j. After software installation is complete,
double-click on the desktop.
Follow the on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1- f on the front page.
j When the Installation completed successfully screen
appears, click Restart.
Remove the CD-ROM after clicking Restart and restarting the computer.
Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
The system is restarted automatically.
When using Mac OS X v.10.2.8 to v.10.3.3:
Restarting the computer while connected to the machine may cause the
machine not to be detected. To resolve this, either unplug the USB cable
then plug it back in again, or turn the machine off then back on again.
Note
When using Mac OS X v.10.2.8 to v.10.3.x, before using the Operation Panel on
the machine to save originals scanned from the Platen Glass to the computer, it is
necessary to select MP Navigator EX as the launch application on Image Capture
under Applications. For details, refer to “Scanning Images” in the User’s Guide on-
screen manual.
Software installation is now complete.
•
Part no. QT5-1118-V01 © 2007 Canon Inc. “Microsoft” is a registered trademark of Microsoft Corporation. “Windows” is a trademark of Microsoft Corporation, registered in the U.S. and other countries. “Windows Vista” is a trademark of Microsoft Corporation. “Macintosh” and “Mac” are trademarks of Apple Inc., registered in the U.S. and other countries.