Canon K30356 WLAN Module User Manual Manual statements

Download:
Mirror Download [FCC.gov]
Document ID	1917920
Application ID	Q1rgPgoS6Zv1cJ06+klSiA==
Document Description	Manual statements
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	57.75kB (721934 bits)
Date Submitted	2013-03-15 00:00:00
Date Available	2013-08-31 00:00:00
Creation Date	0000-00-00 00:00:00
Document Lastmod	0000-00-00 00:00:00
Document Title	Manual statements

layers
To Whom It May Concern:
FCC ID: AZDK30356
IC: 4980-K30356
The WLAN Module “K30356” is for OEM installation only.
When integrating the Module into the end product, the final user manual of the end
product will include the following statements for FCC approval:
The final product has to be labeled as follows:
Contains FCC ID: AZDK30356
FCC § 15.19 Labelling requirements
This device complies with part 15 of the FCC Rules and Industry Canada ticense~exempt
RSS standardts). Operation is subject to the followmg two conditions:
(1 t This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC § 15.21 Information to user
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF Exposure Requirements
To comply With FCC RF exposure compliance requirements, the deVice must be installed to
provide a separation distance of at least 20 cm from all persons.
If the WLAN Module “K30356” will be installed into digital devices or computer
peripheral equipment (JPB), the following statement will be included in the final user
manual additionally.
FCC §15.105 statement
This equipment has been tested and found to comply With the limits for a Class B digital
deVice. pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates. uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
fincrease the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
The WLAN Module “K30356” is for OEM installation only.
When integrating the Module in the in the end product, the end product and the final
user manual of the end product will include the following statements for Industry
Canada approval:
The final product has to be labeled as follows:
Contains IC: 4QBC-K30356
INDUSTRY CANADA Statements
Le present appareil est conforme aux CNR d'lndustrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) I'utilisateur de I'appareil doit accepter tout
brouillage radioélectrique subl, meme sl le brouillage est susceptible d‘en compromettre Ie
fonctionriement.
RF Exposure Requirements
This equipment complies With Canada radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body
Declaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contréle. Cet equipement don étre installé et utilise avec on minimum de
20 cm de distance entre la source de rayonnement et votre corps.
If the WLAN Module “K30356” will be installed into digital devices or computer
peripheral equipment, the following statement will be included in the final user manual
additionally.
Canada Class B statement
This Class B digital apparatus complies with Canadian ICES—003
Cet appareil numerique de la classe B est conforms a la norme NMB-003 du Canada.
Signature (Authorized Person)
Carsten Steinréder on behalf of Canon Inc.
7Layers AG 30-2, Shimomaruko 3-chome
Borsigstr.1 1 Ohla-Ku, Tokyo, 146-8501
40880 Ratingen Japan
Germany

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2

EXIF Metadata provided by EXIF.tools