Cansec Systems ZODRCS ZORDCS User Manual T MyFiles Wiring Zodiac Wiring wpd

Cansec Systems Ltd ZORDCS T MyFiles Wiring Zodiac Wiring wpd

Contents

users manual 1

CANSEC SYSTEMS LTD., 3105 Unity Drive, Unit 9, Mississauga, Ontario, L5L 4L2 Tel: (905) 820-2404 Fax: (905) 820-0301DESCRIPTION:The Zodiac SmartCard Fingerprint Reader operates by reading a user’s template stored in a contactless SmartCard orself-adhesive BioPatch for ID verification prior to gaining access. The stick-on BioPatch can be affixed to existingaccess cards or devices such as PDAs or cell phones. Once the card or BioPatch is presented to the Zodiac reader, theuser’s ID number and encrypted fingerprint template are extracted. An indicator on the sensor is activated to prompt theuser to present their finger. The reader then compares the scanned fingerprint to the template stored in the Zodiaccredential. If they match, the User ID and Facility Code are transmitted to the host access control system. USING ZODIAC:Note: The user must first be enrolled at a Zodiac Enrollment Station and be assigned a Zodiac ID SmartCard orBioPatch.1. To authenticate at a Zodiac Fingerprint Reader, the user first presents the SmartCard or BioPatch to the front ofthe reader. The card should be held steadily until the fingerprint sensor on Zodiac flickers RED, indicating asuccessful transfer of the user’s template . The Zodiac credential can now be removed. 2. After the Zodiac credential is presented successfully, the user applies their finger to the sensor for verification.Note: When applying the finger to the sensor, the same pressure should be used as during the enrollmentprocess.3. If the fingerprint verification is successful, Zodiac will transmit the user’s ID and system code information to theaccess control system to verify if the user has access through the entrance or exit being controlled.ZODIAC LED INDICATORS AND BEEPER:Zodiac has two Bi-Color (RED/GREEN) LED’s to provide visual indication of verification and access status from the hostaccess control system. In addition, Zodiac has a beeper which is controlled by the access control system.LEFT LED: This LED provides indication of successful or unsuccessful fingerprint verification. SUCCESSFUL FINGERPRINT VERIFICATION: If the fingerprint is verified successfully, this LED turns GREEN momentarily.UNSUCCESSFUL FINGERPRINT VERIFICATION: If the fingerprint is NOT verified successfully, this LED flashes RED and beeps four times rapidly.RIGHT LED: This LED is controlled by the host access control system and is intended to indicate “Access Granted(GREEN) or “Access Denied (RED)”.BEEPER: The internal beeper is controlled by the host access control system.USER INSTRUCTIONS: MODEL CA-ZODRCSZODIAC SMARTCARD FINGERPRINT ACCESS READER

Navigation menu