Capital Prospect MKA315 315MHz remote control User Manual Skylink Remote Control

Download:
Mirror Download [FCC.gov]
Document ID	2370122
Application ID	h5QEIa6sBuOY2v+V8ZdVOg==
Document Description	KUTMKA315 user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.49kB (68666 bits)
Date Submitted	2014-08-26 00:00:00
Date Available	2014-08-28 00:00:00
Creation Date	2014-08-18 23:10:44
Producing Software	Microsoft® Word 2010 Trial
Document Lastmod	2014-08-18 23:10:44
Document Title	Skylink Remote Control
Document Creator	Microsoft® Word 2010 Trial
Document Author:	Joe Ng

Skylink Remote Control
Model : MKA-315
PRELIMINARY COPY
1. INTRODUCTION
In this package, you will find a Skylink Remote transmitter with 3V lithium battery. The
Remote transmitter allows you to operate the Skylink’s receiver.
There are four buttons on the transmitter MKA-315, each button can be programmed to
control Skylink receiver.
2. PROGRAM THE TRANSMITTER TO RECEIVER
In order for the remote control to communicate with the receiver, the transmitter must be
programmed to the receiver. Follow the brief instructions below to program transmitter to
the receiver you want to control.
Refer to the receiver user’s instructions to set up the unit.
1. Press the Learn button on the receiver unit.
2. Once the learn button is pressed, the receiver LED will flash quickly. Release the
Learn button.
3. Press any one of the 4 buttons on the transmitter that you want to program to the
receiver
4. Once the transmitter is programmed, the receiver LED will flash slowly.
5. You may now operate the receiver with this new transmitter.
3. OPERATION
Press the button for 1 second and release, this will activate the “learned” Skylink
receiver(s).
4. BATTERY
The remote control operates on one 3-volt lithium battery that is installed at the factory.
Dispose of used battery properly according to the instructions.
5. WARRANTY
If, within one year from date of purchase, this product should become defective (except
battery), due to faulty workmanship or materials, it will be repaired or replaced, without
charge. Proof of purchase is required.
6. FCC statement
The device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the product.
7. IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
8. CUSTOMER SERVICE
If you would like to order Skylink’s products or have difficulty getting them to work,
please :
1. visit our FAQ section at www.skylinkhome.com, or
2. email us at support@skylinkhome.com, or
3. call our toll free at 1-800-304-1187 from Monday to Friday, 9am to 5pm EST. Fax
(800) 286-1320.
SKYLINK TECHNOLOGIES INC.,
17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3
Email: support@skylinkhome.com
Website: http://www.skylinkhome.com
© 2014 Skylink Group

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-US
Tagged PDF                      : Yes
Title                           : Skylink Remote Control
Author                          : Joe Ng
Creator                         : Microsoft® Word 2010 Trial
Create Date                     : 2014:08:18 23:10:44+08:00
Modify Date                     : 2014:08:18 23:10:44+08:00
Producer                        : Microsoft® Word 2010 Trial

EXIF Metadata provided by EXIF.tools