Carvin 1584 Owners Manual 76 01230B CLUB SPKRS
Carvin-Pm15-Owners-Manual carvin-pm15-owners-manual
Carvin-Pm15A-Owners-Manual carvin-pm15a-owners-manual
Carvin-Sw1801-Owners-Manual carvin-sw1801-owners-manual
Carvin-Sw1801A-Owners-Manual carvin-sw1801a-owners-manual
Carvin-1232-Owners-Manual carvin-1232-owners-manual
2014-07-19
: Carvin Carvin-1584-Owners-Manual carvin-1584-owners-manual carvin pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
CARVIN ENGINEERING DATA HIGH-PERFORMANCE CLUB LOUDSPEAKERS Superb sound with reliability has been one of Carvin’s trademarks for high performance loudspeakers. High grade components, lightweight Poplar plywood with dado construction ensures high performance for many years. For road worthiness, Carvin uses recessed steel handles, steel corners, expanded metal steel grilles and duratuff™ covering. Front loaded woofers and wide dispersion titanium high frequency drivers are used to reproduce the full audio spectrum with superb clarity. Carvin’s APS™ Active Powered Speakers are more than just another “power amp in a cabinet”. Biamp or Triamp models feature time aligned circuitry and adjustable EQ resulting in a much more efficient system that adds clarity to your sound that our competitors do not offer. Every APS™ loudspeaker utilizes Carvin’s DCM power amp technology for continuously rated RMS power. Carvin’s extensive engineering along with numerous listening tests have proven our “made in USA” loudspeakers to be superior. Like millions of users around the world, enjoy using your new loudspeaker. 805 1230 1540/1540A RECEIVING INSPECTION INSPECT YOUR LOUDSPEAKER FOR DAMAGE which may have occurred during shipping. If damage is found, please notify the shipping company & CARVIN. SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship your unit, always use the original carton and packing material. CARVIN and the shipping company are not liable for any damage caused by improper packing. SAVE YOUR INVOICE. It will be required for warranty service if needed in the future. SHIPMENT SHORTAGE. If you find items missing, they may have been shipped separately. Please allow several days for the rest of your order to arrive before inquiring. RECORD THE SERIAL NUMBER on the enclosed warranty card for your records. Return the warranty card with your name and comments to us, or register online at: 1232 1542/1542A PM15/PM15A USA customers register online at: www.carvin.com/registration All other countries register online at: www.carvinworld.com/registration LIMITED WARRANTY Parts and labor are covered for 1 year on manufacturer’s defects. Warranty does not cover burned out drivers caused by excessive power or distortion, or physical damage caused by general use, moisture or dust. CAUTION: Square wave distortion from power amps can destroy drivers much faster than clean RMS power. The power generated by the APS internal power amps has the capacity to damage the drivers, in which case they would not be covered under warranty. 1562 1588/1588A 1584/1584A SERVICE In the USA, please call 800-235-2235 for a RMA number (return authorization number). Write this number on the box and enclose a description of the problem. Prepay to Carvin 12340 World Trade Drive, SD, CA 92128 Outside the USA, contact your dealer or go to http://www.carvinworld.com for your nearest service center. Include a written description of the problem with serial number and date of purchase. SW1802 SW1801/SW1801A 76-01230B 0604 2-WAY SYSTEMS SPECS: 805 85 Hz to 17 kHz ±3 dB 72 Hz (-10 dB) 200 watts Continuous up to 400 watts 98 dB SPL, 1Watt @ 1meter 60° Horizontal, 60° Vertical Yes 8Ω No Two 1/4" Vented Bass Reflex Poplar Plywood 12.75"W x 11.5"D x 18.5"H 32.4 x 29 x 47 cm Net Weight: 24 lbs. 9.8 Kgs Options: Cover: CV400 Stand: SS20 Frequency Response: Useable Low Frequency: Power Handling: Recommended Amp: Sensitivity: Coverage Angles: Horn Driver Protection: Nominal Impedance: Biampable: Connectors: Woofer Enclosure Type: Construction: Dimensions: 1230 75Hz to 18kHz±3dB 55 Hz (-10 dB) 300 watts Continuous up to 600 watts 99 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 8Ω Yes Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 17.5"W x 12"D x 22"H 44.4 x 30.5 x 55.8 cm 36 lbs. 16.3 Kgs Cover: CV1230 Stand: SS20 1232 80Hz to 18kHz±3dB 61 Hz (-10 dB) 300 watts Continuous up to 600 watts 99 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 8Ω Yes Two 1/4" & Two Speakon™ Closed Box Poplar Plywood 18"W x 13"D x 22"H 45.7 x 33 x 55.8 cm 33 lbs. 15 Kgs Cover: CVS1232 1540 60Hz to 18kHz±3dB 49 Hz (-10 dB) 400 watts Continuous up to 800 watts 100 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 8Ω Yes Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 20"W x 14"D x 26"H 50.8 x 35.5 x 66 cm 51 lbs. 23 Kgs Cover: CVS1540 1542 65Hz to 18kHz±3dB 52 Hz (-10 dB) 400 watts Continuous up to 800 watts 101 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 8Ω Yes Two 1/4" & Two Speakon™ Closed Box Poplar Plywood 20"W x 14"D x 26"H 50.8 x 35.5 x 66 cm 46 lbs. 21 Kgs Cover: CVS1542 1562 54Hz to 19kHz±3dB 44 Hz (-10 dB) 600 watts Continuous up to 900 watts 102 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 4Ω Yes Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 17"W x 15.25"D x 44.25"H 43 x 38.7 x 112cm 82 lbs. 15 Kgs Cover: CV1562 3-WAY SYSTEMS SPECS: 1584 50 Hz to 18 kHz ±3 dB 38 Hz (-10 dB) 400 watts Continuous up to 800 watts 100 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 8Ω Yes Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 22"W x 15.25"D x 31.5”H 55.8 x 38.7 x 80 cm Net Weight: 74 lbs. 29.4 Kgs Options: Cover: CVS1584 Stand: SS20 Frequency Response: Useable Low Frequency: Power Handling: Recommended Amp: Sensitivity: Coverage Angles: Horn Driver Protection: Nominal Impedance: Biampable: Connectors: Woofer Enclosure Type: Construction: Dimensions: 1588 45Hz to 19kHz±3dB 34 Hz (-10 dB) 800 watts Continuous up to 1200 watts 103 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 4Ω Yes Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 25"W x 19.25"D x 48.5”H 63 x 49 x 123 cm 124 lbs. 51 Kgs Cover: CVS1588 SUBWOOFER SYSTEMS SPECS: SW1801 40 Hz to 450 Hz ±3 dB 28 Hz (-10 dB) 800 watts Continuous up to 1600 watts 95 dB SPL, 1Watt @ 1meter 4Ω Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 24.75"W x 24"D x 34"H 63 x 61 x 86 cm Net Weight: 93 lbs. 41.7 Kgs Options: Cover: CVS1230 Stand: SS20 Frequency Response: Useable Low Frequency: Power Handling: Recommended Amp: Sensitivity: Nominal Impedance: Connectors: Woofer Enclosure Type: Construction: Dimensions: SW1802 35Hz to 1 kHz±3dB 24 Hz (-10 dB) 1600 watts Continuous up to 3200 watts 97 dB SPL, 1Watt @ 1meter 4Ω Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 48"W x 24"D x 31"H 122 x 61 x 79 cm 159 lbs. 65.7 Kgs PM15/PM15A SPECS: Frequency Response: Useable Low Frequency: Power Handling: Recommended Amp: Sensitivity: Coverage Angles: Horn Driver Protection: Nominal Impedance: Biampable: Connectors: Woofer Enclosure Type: Construction: Dimensions: 60 Hz to 18 kHz ±3 dB 49 Hz (-10 dB) 400w continuous, 800 peak up to 800 watts 100 dB SPL, 1 Watt @ 1 meter 90° Horizontal, 45° Vertical Yes 8Ω Yes One 1/4", One Speakon™ Vented Acrylonitrile Butadiene Styrene (ABS) 17.5"W x 14"D x 27"H 44.5 x 35.6 x 68.6 cm Net Weight: 48 Lbs. Options: 21.8 Kgs Cover: CV15 APS™ POWER AMP SPECS: 1540A 20 Hz to 20 kHz ±1 dB Less than 0.1% @ 90% power 350 watts RMS 300 watts @ 8Ω N/A 50 watts @ 16Ω 1.5VAC for full output-level set at “0” Equalization: High ±6dB @ 10 kHz Mid ±6dB, sweepable 100 Hz-5 kHz Low ±6dB @100 Hz Active Crossover Filters: 24dB / octave Linkwitz-Riley Input/Through: 1/4" balanced & XLR Imput Impedance: 22kΩ Common Mode Rejection: 72dB @ 1kHz Overload Protection: Yes Power Amp Design: Carvin DCM™ Technology AC Voltage, VA: 120 or 240 VAC models, 300 VA Idle VA: 20 VA AC Connection: 3 prong connector (grounded) AC Power Cable: 16 ga. (heavier for long runs) Weight: 55 lbs. 24.9 kg Options: Cover: CVS1540 Stand: SS20 Frequency Response: THD: Total Power : Low Frequency: Mid Frequency: High Frequency: Sensitivity: 1542A 20 Hz to 20 kHz ±1 dB Less than 0.1% @ 90% power 350 watts RMS 300 watts @ 8Ω N/A 50 watts @ 16Ω 1.5VAC for full output-level set at “0” High ±6dB @ 10 kHz 1584A 20 Hz to 20 kHz ±1 dB Less than 0.1% @ 90% power 425 watts RMS 300 watts @ 8Ω 75 watts @ 16Ω 50 watts @ 16Ω 1.5VAC for full output-level set at “0” High ±6dB @ 10 kHz 1588A 20 Hz to 20 kHz ±1 dB Less than 0.1% @ 90% power 900 watts RMS 700 watts @ 4Ω 120 watts @ 8Ω 80 watts @ 16Ω 1.5VAC for full output-level set at “0” High ±6dB @ 10 kHz Mid ±6dB, sweepable 100 Hz-5 kHz Low ±6dB @100 Hz 24dB / octave Linkwitz-Riley 1/4" balanced & XLR 22kΩ 72dB @ 1kHz Yes Carvin DCM™ Technology 120 or 240 VAC models, 300 VA 20 VA 3 prong connector (grounded) 16 ga. (heavier for long runs) 51 lbs. 23.1 kg Cover: CVS1542 Mid ±6dB, sweepable 100 Hz-5 kHz Low ±6dB @ 100 Hz 24dB / octave Linkwitz-Riley 1/4" balanced & XLR 22kΩ 72dB @ 1kHz Yes Carvin DCM™ Technology 120 or 240 VAC models, 400 VA 20 VA 3 prong connector (grounded) 16 ga. (heavier for long runs) 81 lbs. 36.7 kg Cover: CVS1584 Stand: SS20 Mid ±6dB, sweepable 100 Hz-5 kHz Low ±6dB @ 100 Hz 24dB / octave Linkwitz-Riley 1/4" balanced & XLR 22kΩ 72dB @ 1kHz Yes Carvin DCM™ Technology 120 or 240 VAC models, 900 VA 25 VA 3 prong connector (grounded) 16 ga. (heavier for long runs) 139 lbs. 63 kg Cover: CVS1588 SW1801A 20 Hz to 20 kHz ±1 dB Less than 0.1% @ 90% power 700 watts RMS 700 watts @ 4Ω N/A N/A 1.5VAC for full output-level set at “0” N/A N/A N/A 24dB / octave 80Hz, 120Hz, or bypass 1/4" balanced & XLR 22kΩ 72dB @ 1kHz Yes Carvin DCM™ Technology 120 or 240 VAC models, 900 VA 25 VA 3 prong connector (grounded) 16 ga. (heavier for long runs) 139 lbs. 63 kg Cover: CVS1801 The power generated by the APS internal power amps has the capacity to damage the drivers, in which case they would not be covered under warranty. NON-POWERED MODELS REAR CONNECT PLATE (non-powered speakers) - Use either 1/4” or SUGGESTIONS FOR OPTIMAL PERFORMANCE To help control feedback, use a graphic equalizer. Keep the speakers in front of the microphone. Never direct the microphone towards the speaker. For greater coverage, add additional speakers. Doubling the speakers adds four times the acoustical power which is more advantagious than increasing power. Speakon™ cables for connecting to the power amp and daisy chaining to an additional speaker. For high powered applications, use Speakon™ cables only. SPEAKER CABLES Use either Carvin’s PH50 speaker cable for up to 50’ or highcurrent 12GA Speakon™ cables for lengths up to 150’. 18GA cables are not recomended. You can DAISY-CHAIN up to one additional speaker per cable by using the OUTPUT connector. Be sure the total impedance to the amp is not lower than the amp’s minimum impedance. 742 PRO SOUND REINFORCEMENT IMPEDANCE: 8 Ohms POWER RATING: 400 Watts JACKS WIRED PARALLEL TYPICAL LOUDSPEAKER IMPEDANCE CONFIGURATIONS Individual speaker or speaker cabinet wiring examples for total impedance. TWIST-LOK INPUT 1+ SIGNAL 1– GROUND 2+ NOT USED 2– NOT USED EXT. SYSTEM MADE IN THE USA Serial No. Speakon™ & 1/4” through connectors for additional speakers Speakon™ & 1/4” inputs from power amp output. STEREO BIAMPING STEREO CROSSOVER Suggested settings TYPICAL STEREO SETUP Right Input Left Input 1-800-854-2235 www.carvin.com INTERNAL FUSE 90-250 VAC 10 VA ~50-60HZ MONO XC3000 SWITCHABLE TO MONO [ LOW 1+2] Electronic Crossover GND LIFT [ LOW 1+2 ] CHANNEL ONE HIGH MID LOW PHASE PHASE PHASE CHANNEL TWO HIGH MID LOW PHASE PHASE PHASE Right High Out Ch 1 Left Left Low Out BRIDGE switch must be OFF (OUT). For (stereo) the PARALLEL switch must be OFF (OUT). Right Low Out Left High Out CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN SPEAKER – 1 + ––BRIDGE–– + – SPEAKER 2 CAUTION - TO PREVENT ELECTRICAL SHOCK DO NOT DEFEAT THE SAFETY GROUND ON THE POWER CORD - DO NOT REMOVE COVER . WARNING - TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFED PERSONNEL. CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN SPEAKER 1 – + ––BRIDGE–– + – SPEAKER 2 120V~60Hz Slow Blow FUSE 8AG 700VA PROFESSIONAL STEREO POWER AMPLIFIER CAUTION - TO PREVENT ELECTRICAL SHOCK DO NOT DEFEAT THE SAFETY GROUND ON THE POWER CORD - DO NOT REMOVE COVER . WARNING - TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFED PERSONNEL. SERIAL NUMBER CAUTION GND LIFT PARALLEL BRIDGE RISK OF ELECTRIC SHOCK DO NOT OPEN LIMITERS CH1 IN SPEAKER – 1 + ––BRIDGE–– + – SPEAKER 2 CAUTION - TO PREVENT ELECTRICAL SHOCK DO NOT DEFEAT THE SAFETY GROUND ON THE POWER CORD - DO NOT REMOVE COVER . WARNING - TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFED PERSONNEL. XLR PIN 1 GND PIN 2 POS PIN 3 NEG 120V~60Hz Slow Blow FUSE 8AG 700VA PROFESSIONAL STEREO POWER AMPLIFIER PARALLEL BRIDGE 120V~60Hz Slow Blow FUSE 8AG 700VA Low Frequency Amp SERIAL NUMBER GND LIFT PROFESSIONAL STEREO POWER AMPLIFIER SERIAL NUMBER LIMITERS GND LIFT PARALLEL BRIDGE LIMITERS CH1 IN CH1 IN XLR PIN 1 GND PIN 2 POS PIN 3 NEG XLR PIN 1 GND PIN 2 POS PIN 3 NEG High Frequency Left Highs Ch 2 Right Right Highs Left Full Range Right Full Range Left Lows Right Lows Solder tinned wires 1/4" Strip cable insulation back 3/4" 2+ Standard 1/4” Phone Plug Tip-Sleeve Speakon™ 21- Sleeve Tip 1+ • Slip "Securing Hub" then "Cable Clamp" over cable before attaching wires. • Connection Configuration: Black (1+) / positive White (1-) / negative Red (2+) / positive Green (2-) / negative • Solder wires in contacts or use hex screws provided. Tip (Positive) Sleeve (Negative) Twist-Lok Housing Contact Insert Cable Clamp Securing Hub POWERED MODELS APS HOOK-UP APS 1. INPUT/THRU OUTPUT Use the balanced XLR or 1/4” connectors fea- ACTIVE POWERED SYSTEMS APS BI-AMPED/TRI-AMPED LOUDSPEAKERS Carvin’s APS™ Active Powered Speakers are more than just another “power amp in a cabinet”. With two separate power amps in the 2-way systems and three separate power amps in the 3-way systems, a more efficient design adds clarity as each amp only needs to reproduce frequencies for it’s respective driver. Compared to other powered speakers the APS system will deliver more clarity with greater power. APS POWER AMPS APS loudspeakers utilize Carvin’s DCM power amp technology to supply continuously rated RMS power. APS TIME ALIGNMENT CIRCUITRY Due to the physical size and placement of various drivers in a speaker enclosure, the sound of each driver reaches your ears at different times. This difference is enough to cause a slight phase change. To alleviate this problem, the APS utilizes time delay circuits to time-align the drivers with one another. DISTANCE DELAY 360µs tured on the rear control panel. Using a balanced source will reduce noise which may be picked up by the cable. You may DAISY-CHAIN as many APS systems as you wish. All connectors are wired in parallel. 2. APS EQUALIZATION The APS powered loudspeakers offer a by passable 3-band mid sweep equalizer for custom tuning to the acoustical environment. The EQ system is engineered specifically for the APS, featuring a boost and cut range of ±6dB to prevent radical adjustments that could otherwise compromise the sound of the system. The Mid-band sweep is particularly useful for enhancing critical mid range frequencies for stage monitoring or for cutting certain frequencies to compensate for room resonances. Press the “EQ IN” switch to activate the equalizer. The BLUE LED displays when the EQ is active. 3. LEVEL CONTROL The LEVEL control adjusts the output volume of the APS. Start by setting the LEVEL at “0”. Weak input signals can be boosted by setting the LEVEL at “+6”. Strong signals can be reduced by turning the LEVEL toward “-12”. The RED LED will flash if the internal power amps start to clip. Turn the LEVEL control down to avoid clipping. Damage to the drivers can result from operating at a level where the RED CLIP LED is constantly illuminated. 4. POWER/PROTECT/CLIP INDICATOR Power up your audio source first, then turn on the APS with the power switch. When the system is active, the LED will indicate GREEN. When shutting down turn off the APS first, then turn off the mixer. If any of the power amps are clipping, the LED will indicate RED and you should reduce the output level. If the system should go into protect mode, the LED will indicate YELLOW and the power amps will shut off. This may occur if; a) the system is overheated due to clipping the power amps for an extended period of time, b) one of the internal drivers developed a short or c) the power amps require service. 5. POWER Push this switch to the UP position to apply power to the unit. The POWER LED will light to show the system is on. 6. AC POWER Use a standard grounded AC cord. Whenever possible, use dedicated circuits for powered speakers. The powered speakers are available in either 120V or 240V models. 7. CROSSOVER FREQUENCY SWITCH The CROSSOVER FREQUENCY switch selects the crossover point for the APS. The 120Hz out setting is generally used with small to mid sized speakers in your setup. Almost all 12” and 15” woofers will benefit from the 120Hz setting. The 80Hz (switch in) setting is generally used with larger 18” woofers. APS BI-AMP/TRI-AMP REAR PANEL: 2 MID MID SWEEP 0 0 1kHz -3 APS ACTIVE ELECTRONIC CROSSOVERS An electronic crossover ATTENUATION dB splits the incoming signal into specific frequency ranges before going to the separate amps for each driver. For superior frequency control and maximum phase accuracy, the APS utilizes the design of our XC3000 crossover featuring sharp 4th order 24dB/octave Linkwitz-Riley filters. Perfect crossover points are achieved with appropriate frequencies going to each driver. A subsonic filter improves woofer efficiency by removing extremely low frequencies under 20 Hz that waist power. Low Frequency High Frequency Low Pass Filter High Pass Filter 300 Watts 742A, 832A 50 Watts 20Hz 1 kHz 3 LOW +3 -6 -3 EQ IN +6 HIGH 0 +3 -6 -3 +6 100Hz 0 742A TIME-ALIGNED BI-AMP SYSTEM 300 W RMS -12 5kHz +6 MADE IN THE LEVEL US A CAUTION ! +6 +3 -6 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION ± TO PREVENT ELECTRICAL SHOCK DO NOT DEFEAT THE SAFETY GROUND ON THE POWER CORD. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. WARNING ± TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFIED PERSONNEL. RED CLIP THRU OUTPUT GREEN PROTECT POWER Serial No. 120VAC 60Hz 300VA INPUT 5 4 1 BI-AMP YELLOW 6 SW1801 SUBWOOFER 8. CROSSOVER BYPASS SWITCH The crossover bypass switch bypasses the 20 kHz ATTENUATION dB internal active crossover allowing the use of an outboard active crossover. Low Frequency Low Pass Filter 1584A 300 Watts 1588A 700 Watts 20Hz Mid Frequency High Pass Filter 75 Watts 120 Watts 50 Watts 80 Watts 1 kHz 3 8 High Frequency Band Pass Filter 7 TRI-AMP CROSSOVER BYPASS SW1801A CROSSOVER FREQUENCY 120Hz 80Hz 20 kHz ACTIVE SUBWOOFER SYSTEM 700W RMS 0 -12 HI PASS OUTPUT MADE IN THE LEVEL US A ! +6 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION ± TO PREVENT ELECTRICAL SHOCK DO NOT DEFEAT THE SAFETY GROUND ON THE POWER CORD. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. WARNING ± TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFIED PERSONNEL. RED CLIP THRU OUTPUT YELLOW GREEN PROTECT POWER Serial No. 120VAC 60Hz 700VA INPUT 1 4 5 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:15b147ba-9bdc-11d9-9234-000393d1c77c Producer : Acrobat Distiller 5.0.5 for Macintosh Create Date : 2004:07:01 16:29:33Z Modify Date : 2005:03:23 12:42:34-08:00 Metadata Date : 2005:03:23 12:42:34-08:00 Creator Tool : QuarkXPress.: AdobePS 8.7.3 (301) Document ID : uuid:c938a2fe-9bdb-11d9-9234-000393d1c77c Format : application/pdf Creator : Tim Slais Title : 76-01230B CLUB SPKRS.qxd Author : Tim SlaisEXIF Metadata provided by EXIF.tools