Carvin Tr1503 Quick Reference Guide 1503 Data Sheet
2014-07-19
: Carvin Carvin-Tr1503-Quick-Reference-Guide carvin-tr1503-quick-reference-guide carvin pdf
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
CARVIN ENGINEERING DATA TR1503 SPEAKER SYSTEM INSTRUCTIONS REAR CONNECT PLATE Two standard 1/4” phone jacks and two Speakon™ connectors are featured. See other side for hookup diagrams. SPEAKER CABLES Our standard cable for speaker hookups is the PH50. This cable features 1/4” plugs and 16 gauge copper wire. The PH50 is adequate for lengths up to 50’ under normal use. You can DAISY-CHAIN up to one additional speaker per cable by using the unused 1/4” OUTPUT” jack (right side) on your speaker jack plate. Be sure to note the total impedance to the amp so it is not lower than it’s recommended impedance. See Typical Loudspeaker Impedance Configurations. Our professional SPK25, SPK50 & SPK100 cables feature Speakon™ lock-on connectors with heavy 4 conductor 12 gauge copper wire. These cables are to be connected in the same way as the PH50 with compatible amps. PRECAUTIONS TR1503 Congratulations on your selection of the 1503 loudspeaker. As one of the finest speaker systems made, the TR1503 will reproduce your music with the purest, most natural sound available. The high powered titanium horn and 8” midrange drivers maintain faithful, clean response even under the most stressful, intense power levels. The computeraided tuned-ported enclosures offer the best frequency response possible from the heavyduty cast frame 15” woofer. The featured Trapezoid enclosure offers a 15° angle off-set on each side for you to stack or hang the enclosures together creating full, gapless coverage. Hookups are easy too, with either 1/4” jacks or professional Speakon™ connectors as a Biamped or full-range system. We recommend our 18’ TR1801 sub-woofer system if you require more bass. RECEIVING INSPECTION INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during shipping. If any damage is found, please notify the shipping company & CARVIN. SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship your unit, always use the original carton and packing material. This will provide the best possible protection during shipment. CARVIN and the shipping company are not liable for any damage caused by improper packing. SAVE YOUR INVOICE. It will be required for warranty service if needed in the future. SHIPMENT SHORTAGE. If you find items missing, they may have been shipped separately. Please allow several days for the rest of your order to arrive before inquiring. RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this manual for your records. Keep your portion of the card and return the portion with your name and comments to us. SUGGESTIONS FOR OPTIMAL PERFORMANCE Raise the enclosure to the ear level of your audience for greater coverage. To help control feedback, use a graphic equalizer. Keep the speakers in front of the microphone. Never direct the microphone towards the speaker. For greater coverage, add a second speaker system 20° to 30° off axis. TYPICAL LOUDSPEAKER IMPEDANCE CONFIGURATIONS Individual speaker or speaker cabinet wiring examples for total impedance. 8Ω TOTAL IMPEDANCE + 8Ω + SERIES CONNECTION 16Ω TOTAL IMPEDANCE + 8Ω 16Ω + PARALLEL CONNECTION 4Ω TOTAL IMPEDANCE + 8Ω 4Ω + 8Ω SERIES/PARALLEL CONNECTION 8Ω TOTAL IMPEDANCE + + 8Ω 8Ω + + + 8Ω + 8Ω 8Ω 8Ω + 1) DO NOT EXCEED THE POWER RATING marked on the rear connect plate. Excessive power will destroy drivers. 2) DISTORTION from power amps will destroy drivers much faster than clean power. 3) WATER, MOISTURE, and DUST are harmful to drivers causing failure which is not covered under warranty. WARRANTY CARVIN loudspeakers are covered by a ONE year limited warranty unless otherwise stated. Warranty coverage is limited to original manufactures defects only. WARRANTY DOES NOT COVER: 1) Opened or burned voice coils. 2) Torn cones caused by improper packing or abuse. 3) Damage from rain, moisture, ETC. When returning defective driver(s), remove them from the enclosure to reduce shipping costs . DO NOT stuff paper into the driver(s). Return pre-paid by UPS. Include your address and description of the problem. Your driver(s) will be returned COD for the cost of shipping and reconditioning if not covered under warranty. TR1503 FREQUENCY RESPONSE MODEL TR1503 SPEAKER SYSTEM SPECS: Frequency Response: Useable Low Frequency: Power Handling: Recommended Amp: Sensitivity: Coverage Angles: Nominal Impedance: Crossover Type: Inputs/Outputs: Bi-Amp Support: Horn Driver Protection: Woofer Enclosure Type: Enclosure Covering: Dim/Wt: Optional Cables: Optional Vinyl Cover: 48 Hz to 19 kHz ±3 dB 36 Hz (-10 dB) 600w Continuous Program Pw 100 to 1200 watts 103 dB SPL, 1 Watt @ 1 meter 90° Horizontal, 45° Vertical 8Ω C1503 Constant Voltage Two 1/4", two Speakon™ Yes—Panel Switch Yes Vented Box Black Duratuff II™ 24"W x 18.75"D x 36.75"H, 88lbs. PH50, SPK25, SPK50, SPK100 CVS1518 8Ω For your records, you may wish to record the following information. Serial No._____________________ Invoice Date_______________ 76-01503 0298 12340 World Trade Drive, San Diego, CA 92128 (619) 487-1600 (800) 854-2235 www.carvin.com HOOKUP DIAGRAMS NORMAL FULL RANGE HOOKUP SPEAKER SYSTEM MODE SWITCH TO FULL RANGE FULL RANGE MIXER POWER AMP INPUT SPK OUT 1 Toll Free 1-800-854-2235 TR1503 PROFESSIONAL SOUND REINFORCEMENT OUT 8 Ω 600 Watts FULL RANGE–INPUT BIAMP SW–HI FREQ. INPUT 8Ω USA JACKS WIRED PARALLEL IN FULL RANGE MODE 1588 FULL RANGE –PARALLEL BIAMP SW–LOW FREQ. INPUT 8Ω Speakon™ 1+SIGNAL 1–GROUND 2+ & 2– NOT USED BI-AMP HOOKUP MADE IN THE USA MODE SWITCH TO BIAMP SPEAKER SYSTEM FULL RANGE MIXER POWER AMP BIAMP INPUT OUT ADDITIONAL SYSTEM BIAMP MIXER SPK OUT 1 TR1503 PROFESSIONAL SOUND REINFORCEMENT 8 Ω 600 Watts USA FULL RANGE–INPUT BIAMP SW–HI FREQ. INPUT 8Ω JACKS WIRED PARALLEL IN FULL RANGE MODE FULL RANGE –PARALLEL BIAMP SW–LOW FREQ. INPUT 8Ω Speakon™ 1+SIGNAL 1–GROUND 2+ & 2– NOT USED IN (Set FREQ 600Hz) SUB ELECTRONIC CROSSOVER LO HI MADE IN THE USA