Casio Ap 460 Owners Manual AP460_EN

Web_AP460-ES-1A Web_AP460-ES-1A_EN AP-460 | Electronic Musical Instruments | Manuals | CASIO

2015-03-09

: Casio Casio-Ap-460-Owners-Manual-590469 casio-ap-460-owners-manual-590469 casio pdf

Open the PDF directly: View PDF .
Page Count: 66

AP460-ES-1A

EN/ES

USER’S GUIDE

GUÍA DEL USUARIO

Please keep all information for future reference.

Guarde toda información para tener como referencia futura.

Safety Precautions

Before trying to use the piano, be sure to read

the separate “Safety Precautions”.

Precauciones de seguridad

Antes de intentar usar el piano, asegúrese de

leer las “Precauciones de seguridad” separadas.

EnglishEspañol

AP-460

This recycle mark indicates that the packaging conforms to

the environmental protection legislation in Germany.

Esta marca de reciclaje indica que el empaquetado se

ajusta a la legislación de protección ambiental en Alemania.

MA1407-A Printed in China

AP460-ES-1A.indd 1 2014/07/04 17:12:54

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important!

Please note the following important information before using this product.

• Before using the AD-E24250LW Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power

cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged.

• The product is not intended for children under 3 years.

• Use only CASIO AD-E24250LW adaptor.

• The AC adaptor is not a toy.

• Be sure to disconnect the AC adaptor before cleaning the product.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit

from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the

apparatus.

The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.

When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that purpose, locate

the apparatus in a way that secures easy access to the power cord.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Declaration of Conformity

Model Number: AP-460

Trade Name: CASIO COMPUTER CO., LTD.

Responsible party: CASIO AMERICA, INC.

Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

Manufacturer:

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Responsible within the European Union:

CASIO EUROPE GmbH

Casio-Platz 1, 22848 Norderstedt, Germany

This mark applies in EU countries only.

Declaration of Conformity According to EU Directive

EN-1

AP460-ES-1A.indd 3 2014/07/04 17:12:55

EN-2

Contents

General Guide .................................EN-4

FUNCTION Button......................................................... EN-5

Saving Settings and Using Operation Lock................... EN-5

Power Outlet....................................EN-6

Turning Power On or Off ............................................... EN-6

Returning the Digital Piano to Its Factory Default

Settings.......................................................................... EN-6

Playing with Different Tones .........EN-7

Selecting and Playing a Tone........................................ EN-7

Adjusting Acoustic Piano Sound Characteristics........... EN-9

Layering Two Tones...................................................... EN-9

Using Effects ............................................................... EN-10

Using the Digital Piano’s Pedals.................................. EN-11

Using the Metronome .................................................. EN-12

Playing a Piano Duet................................................... EN-13

Using Built-in Songs

(Concert Play, Music Library,

Demo Tunes) .................................EN-15

Performing Demo Play ................................................ EN-15

Concert Play................................................................ EN-16

Practicing with a Concert Play Song ........................... EN-16

Music Library ............................................................... EN-18

Playing Back a Specific Music Library Song ............... EN-18

Practicing with a Music Library Song........................... EN-18

Playing Back Audio Data Stored on

a USB Flash Drive ....................................................... EN-19

Recording and Playback ..............EN-20

Recording to Built-in Song Memory

(Song Recorder).......................................................... EN-20

Using the SONG RECORDER Button......................... EN-21

Recording to a USB Flash Drive (Audio Recorder) ..... EN-23

Configuring Settings with the

Keyboard .......................................EN-27

To configure settings with the keyboard ...................... EN-27

Keyboard Keys Used for Configuring Settings ............ EN-29

Parameter List ............................................................. EN-30

Hall simulator ........................................................... EN-30

Tone selection.......................................................... EN-30

Chorus (CHORUS)................................................... EN-30

Brilliance (BRILLIANCE) .......................................... EN-30

Layer balance........................................................... EN-30

Duet pan................................................................... EN-30

Bass damper effect .................................................. EN-30

Damper noise........................................................... EN-30

Music Library song select

(MUSIC LIBRARY SELECT).................................... EN-31

Tempo (TEMPO)...................................................... EN-31

Beat (BEAT) ............................................................. EN-31

Metronome tempo (METRONOME TEMPO) ........... EN-31

Metronome beat (METRONOME BEAT) ................. EN-31

Concert Play song Play/Stop

(CONCERT PLAY a) .......................................... EN-31

Listen (LISTEN)........................................................ EN-31

Lesson (LESSON).................................................... EN-31

Play (PLAY).............................................................. EN-31

Concert Play song select (SELECT +/–).................. EN-31

Concert Play volume (VOLUME +/–) ....................... EN-31

Music Library volume (ML Volume).......................... EN-31

Metronome volume .................................................. EN-31

Temperament........................................................... EN-32

Temperament Base note.......................................... EN-32

Temperament select ................................................ EN-32

Touch response (TOUCH RESPONSE) .................. EN-32

Keyboard key (Transpose) (TRANSPOSE) ............. EN-32

Keyboard tuning (Tuning)......................................... EN-32

Octave shift .............................................................. EN-32

USB device mode .................................................... EN-33

Local control............................................................. EN-33

Send channel ........................................................... EN-33

Audio Recorder Volume........................................... EN-33

Operation tone ......................................................... EN-33

Back up .................................................................... EN-33

Operation lock .......................................................... EN-33

USB flash drive mode .............................................. EN-34

Format...................................................................... EN-34

Save ......................................................................... EN-34

Load ......................................................................... EN-34

Delete....................................................................... EN-34

Getting Ready ..................................................................................................... EN-50

Assembling the Stand............................................... EN-50

To connect the cables............................................... EN-52

To install the music stand and headphones hook..... EN-53

Opening and Closing the Piano Lid .......................... EN-54

Removing the Protective Tape from the Keyboard

..... EN-54

Power Outlet..............................................................EN-55

Connecting Headphones ...........................................EN-55

Connecting Audio Equipment or an Amplifier ............EN-56

Bundled and Optional Accessories............................EN-56

AP460-ES-1A.indd 4 2014/07/04 17:12:55

English

Contents

EN-3

USB Flash Drive............................EN-35

Storing Standard Audio Data (WAV Files) to

a USB Flash Drive ....................................................... EN-36

Connecting a USB Flash Drive to and

Detaching It from the Digital Piano.............................. EN-37

Formatting a USB Flash Drive..................................... EN-38

Saving a Recorded Song to a USB Flash Drive.......... EN-39

Loading Song Data from a USB Flash Drive into

Digital Piano Memory .................................................. EN-40

Deleting Data from a USB Flash Drive........................ EN-42

Simple Play Back of a Song on a USB Flash Drive..... EN-43

Error Indicators ............................................................ EN-44

Connecting to a Computer...........EN-46

Minimum Computer System Requirements................. EN-46

Connecting the Digital Piano to Your Computer.......... EN-46

Using MIDI................................................................... EN-47

Transferring Song Data with a Computer .................... EN-47

Reference ......................................EN-57

Troubleshooting........................................................... EN-57

Product Specifications................................................. EN-59

Operating Precautions................................................. EN-60

Appendix ........................................... A-1

Tone List...........................................................................A-1

Concert Play List ..............................................................A-1

Music Library List..............................................................A-1

MIDI Implementation Chart

Company and product names used in this manual may

be registered trademarks of others.

AP460-ES-1A.indd 5 2014/07/04 17:12:55

EN-4

General Guide

21 3 4 5 6 8 97

bl bm

Front

Bottom

Rear

AP460-ES-1A.indd 6 2014/07/04 17:12:55

General Guide

EN-5

English

*CAUTION

•Make sure that the cover is fully open whenever you are playing on the keyboard. A partially open cover can

suddenly close unexpectedly and pinch your fingers.

NOTE

•The names shown here are always indicated in bold when they appear within the text of this manual.

The FUNCTION button is used when configuring a variety of different Digital Piano settings. The following are

FUNCTION button basics.

zTo change a setting, hold down the FUNCTION button as you

press the keyboard key that is assigned the setting you want to

select.

Example: “To select a tone” on page EN-7

NOTE

•For details about operations and settings, see “Configuring

Settings with the Keyboard” on page EN-27.

Your Digital Piano lets you save its current settings and lock its buttons to protect against operation errors. For

details, see “Parameter List” on pages EN-30 - EN-34.

FUNCTION Button

Saving Settings and Using Operation Lock

1P (Power) button

2VOLUME controller

3AUDIO RECORDER, FUNCTION button

4START/STOP a button

5SONG RECORDER (L/R) button

6METRONOME, DUET button

7GRAND PIANO (CONCERT),

HAMMER RESPONSE button

8GRAND PIANO (MODERN),

STRING RESONANCE button

9ELEC. PIANO 1, LID SIMULATOR button

bk Pedal connector

bl USB flash drive port

bm USB port

bn DC 24V terminal

bo LINE OUT R, L/MONO jacks

bp PHONES jacks

bq Power lamp

AP460-ES-1A.indd 7 2014/07/04 17:12:55

EN-6

Power Outlet

After you finish assembling the stand, turn on the

Digital Piano. For details, see “Getting Ready” on page

EN-50.

Press the P (Power) button to turn on Digital

Piano power.

•This causes the P (Power) button to light.

•When you turn on the Digital Piano, it performs a

power up operation in order to initialize its system.

During system initialization the tone button lamps

cycle on and off in the sequence for about five

seconds to let you know that system initialization is

in progress.

To turn off the Digital Piano, hold down the

P (Power) button until its light goes out.

NOTE

•Pressing the P (Power) button to turn off power

actually puts the Digital Piano into a standby state.

Minute amounts of current continue to flow within

the Digital Piano in the standby state. If you do not

plan to use the Digital Piano for a long time or if

there is a lightning storm in your area, be sure to

unplug the AC adaptor from the power outlet.

Auto Power Off

This Digital Piano is designed to turn off automatically

to avoid wasting power after no operation is

performed for a preset amount of time. The Auto

Power Off trigger time is about four hours.

•You also can use the procedure below to temporarily

suspend Auto Power Off.

■To disable Auto Power Off

While the Digital Piano is turned on, press the

P (Power) button to turn it off.

While holding down the FUNCTION button,

press the P (Power) button to turn on the

Digital Piano.

•Auto Power Off will be disabled at this time.

NOTE

•Turning off the Digital Piano after performing the

above steps will re-enable Auto Power Off.

Perform the following procedure when you want to

return the Digital Piano’s stored data and settings to

their initial factory defaults.

Turn off the Digital Piano.

While holding down both the ELEC. PIANO 1

and FUNCTION buttons, press the P

(Power) button.

Keep the ELEC. PIANO 1 button and

FUNCTION button depressed as the Digital

Piano performs the operation described

below.

(1) The GRAND PIANO (CONCERT), GRAND

PIANO (MODERN), and ELEC. PIANO 1 button

indicator lamps start to flash in sequence.

(2) The flashing sequence gradually increases in speed.

(3) After some time, the flashing will stop.

Release the ELEC. PIANO 1 button and

FUNCTION button.

•The Digital Piano will initialize its internal system.

You will be able to use the Digital Piano in a short

while.

NOTE

•See “Turning Power On or Off” (page EN-6) for

information about turning power on and off.

Turning Power On or Off

Returning the Digital Piano to

Its Factory Default Settings

AP460-ES-1A.indd 8 2014/07/04 17:12:56

EN-7

English

Playing with Different Tones

The Digital Piano comes with 18 built-in tones.

•The names of the tones are marked above the keyboard keys to which they are assigned.

To select a tone

Select the tone you want.

Use the VOLUME controller to adjust the volume.

Selecting and Playing a Tone

START/STOP a

FUNCTION METRONOME ELEC. PIANO 1

GRAND PIANO

VOLUME

zTo select GRAND PIANO (CONCERT or

MODERN) or ELEC. PIANO 1

•Press one of the GRAND PIANO buttons

(CONCERT or MODERN) or the ELEC.

PIANO 1 to select the one you want.

•The button lamp of the selected tone will light.

zTo select one of the other tones

•While holding down the FUNCTION button,

press the keyboard key that corresponds to the

tone you want to select.

AP460-ES-1A.indd 9 2014/07/04 17:12:56

EN-8

Playing with Different Tones

NOTE

•Of the digital piano’s 18 built-in tones, the first five

are grand piano tone. Each tone has its own

distinctive merits, so you should select the tone that

suits the song you are playing along with or your

own personal preferences. The CONCERT and

MODERN tones are assigned to buttons for quick

and easy selection.

*Feature that applies computer morphing

technology to enable seamless changes between

sounds sampled at various dynamics from a full

concert grand piano.

Bass Tone (BASS)

Selecting the BASS (LOWER) tone in step 1 of the

above procedure will assign the bass tone to the low

range (left side) of the keyboard. The high range (right

side) will be assigned the tone that was selected when

you pressed the BASS key.

•BASS tone lets you effectively split the keyboard

between two different tones.

NOTE

•To return the keyboard to a single tone, select any

tone other than BASS.

•You cannot select BASS when recording to Track 2.

•You can configure settings to sustain reverberation

of the BASS (LOWER) tone while the damper pedal

or sostenuto pedal is pressed. For more information,

see “Bass damper effect” (page EN-30).

Tone Name Characteristics

CONCERT A full concert grand piano tone that

uses Linear Morphing* for dynamic

and natural tone changes. This tone is

designed to reproduce damper,

resonance, and other piano nuances,

which makes it ideal for virtually any

type of piano performance.

MODERN This tone provides a bright grand piano

sound. The volume and timbre of this

tone is quick to respond to different

keyboard pressures. This tone is a good

choice for dynamic and lively

performances.

CLASSIC This is a natural piano tone that closely

resembles the sound of an acoustic

piano. Resonance is more pronounced,

which enables expression of delicate

nuances. This tone is a good choice for

lesson and practice sessions.

MELLOW A warm, subdued grand piano tone.

BRIGHT A bright and clear grand piano tone.

Split Point

Low Range High Range

BASS PIPE ORGAN

(Currently selected tone)

AP460-ES-1A.indd 10 2014/07/04 17:12:56

English

Playing with Different Tones

EN-9

The tones of your Digital Piano have built-in elements

that give them the characteristic reverberation of an

acoustic piano. Each of these elements can be

individually adjusted to one of four levels.

zHAMMER RESPONSE

zSTRING RESONANCE

zLID SIMULATOR

NOTE

•Opening or closing the Digital Piano’s lid does not

affect the LID SIMULATOR setting.

While holding down the FUNCTION button,

press the button that corresponds to the

element whose setting you want to change.

•Each press of the button cycles to the next option for

that setting. The Digital Piano emits a beep pattern

that indicates the currently selected option:

One beep: Option 1 3 Two beeps: Option 2 3

Three beeps: Option 3 3 Four beeps: Option 4 3

One beep: Option 1, etc.

•The lamp of each button lights whenever the

standard setting of its element is selected.

NOTE

•In addition to the above, piano tones also have a

KEY OFF SIMULATOR.

zKEY OFF SIMULATOR

Use the following procedure to layer two tones, so they

sound at the same time.

When specifying two tones for layering, first tone you

select will be the main tone, while the second tone will

be the layered tone.

While holding down the FUNCTION button,

press down the keyboard key for the first tone

you want to layer and then the key for the

second tone.

Example:

First press the

GRAND PIANO BRIGHT

key

and then the STRINGS 1 key.

To unlayer the keyboard, select another tone

by pressing the GRAND PIANO button or by

using the procedure under “Selecting and

Playing a Tone” (page EN-7).

NOTE

•You cannot layer the BASS tone with another tone.

•You cannot perform the layer operation when

recording to Track 2.

Adjusting Acoustic Piano

Sound Characteristics

Controls the time deviation between when a key is

pressed and when the note actually sounds.

Settings

1: Fast 2: Grand piano feel 3: Slightly slower 4: Slow

Adjusts the characteristic reverberation (string

resonance) of an acoustic piano.

You can select a reverberation setting that matches

the song being played or your own personal

preference.

Settings

1: Suppressed 2: Slightly suppressed

3: Reverberation 4: Strong reverberation

Adjusts how sound resonates in accordance with the

opening state of a grand piano lid.

Settings

1: Lid closed 2: Lid opened slightly 3: Lid fully open

4: Lid removed

Causes notes to decay when keyboard keys are

released.

Layering Two Tones

GRAND PIANO BRIGHT

STRINGS 1

AP460-ES-1A.indd 11 2014/07/04 17:12:56

EN-10

Playing with Different Tones

To adjust the volume balance between

two layered tones

While holding down the FUNCTION button,

use the keyboard keys shown below to adjust

the volume of the layered tones.

•To return the volume setting to its initial default, hold

down the FUNCTION button and press both of the

keys at the same time.

To apply a hall simulator

While holding down the FUNCTION button,

press the keyboard key that corresponds to

the hall simulator name you want to select.

C1 C2 C3 C4 C5 C6 C7 C8

Initial default (Center)

Volume of the main tone

(First tone you selected)

Volume of the layered tone

(Second tone you selected)

Using Effects

Hall simulator: Makes your notes resonate.

Chorus : Adds more breadth to your notes.

Hall simulator

Name Description

DUTCH CHURCH Amsterdam church with

acoustics that are suitable for

music

STANDARD HALL Standard concert hall

BERLIN HALL Berlin arena type classic

concert hall

FRENCH

CATHEDRAL

Large gothic cathedral in

Paris

Hall simulator

AP460-ES-1A.indd 12 2014/07/04 17:12:56

English

Playing with Different Tones

EN-11

To apply chorus to a tone

While holding down the FUNCTION button,

use the CHORUS keyboard key to cycle

through the available settings.

•Each press of the CHORUS keyboard key causes the

Digital Piano to beep according to which setting is

selected, as shown in the table below.

•Chorus

About DSP

DSP makes it possible to digitally produce complex

acoustic effects. The DSP is assigned to each tone

whenever you turn on Digital Piano power.

Your Digital Piano comes equipped with three pedals:

damper, soft, and sostenuto

Pedal Functions

zDamper Pedal

Pressing the damper pedal while playing causes notes

you play on the keyboard to be sustained (continue to

play) longer.

•When GRAND PIANO is selected as the tone, using

this pedal generates harmonic and other resonance,

just like the damper pedal on an acoustic grand

piano.

zSoft Pedal

Pressing this pedal while playing suppresses notes

played on the keyboard after the pedal was pressed,

and makes them sound softer.

zSostenuto Pedal

Only the notes of the keys that are depressed when this

pedal is pressed are sustained until the pedal is

released.

NOTE

•If pressing the pedal does not produce the desired

effect, it could mean that the pedal cord is not

connected properly. Refer to step 1 under “To

connect the cables” (page EN-52).

Number of Beeps Setting

1 (long)

1 (short)

Off (OFF)

Light Chorus

Medium Chorus

Deep Chorus

Flanger (whooshing effect)

Chorus

Using the Digital Piano’s

Pedals

Soft pedal Damper pedal

Sostenuto pedal

AP460-ES-1A.indd 13 2014/07/04 17:12:57

EN-12

Playing with Different Tones

Disabling Damper Noise Output

Damper noise is a slight metallic ringing sound that is

generated as the damper of an acoustic piano separates

from the wires pedal when the damper pedal is

pressed. The damper resonance of your Digital Piano

normally includes damper noise, but you can perform

the procedure below to disable its output.

While holding down the FUNCTION button,

press the Damper Noise keyboard key.

•For details about using the keyboard keys for

settings, see “Keyboard Keys Used for Configuring

Settings” (page EN-29).

•Each press of the key toggles the setting and causes

the Digital Piano to beep as described below.

–Long beep: Damper noise output disabled

–Short beep: Damper noise output enabled

Press the METRONOME button.

•This starts the metronome.

•The lamp above the START/STOP a button flash

in time with the metronome beat.

While holding down the FUNCTION button,

press the METRONOME BEAT keyboard

key.

Keep the FUNCTION button depressed as you

advance to step 3.

With the FUNCTION button still depressed

from the previous step, press one of the

BEAT keyboard keys (0 to 9) to specify a beat

value.

•You can specify a beat value in the range of 0 to 9

(beats per measure). A chime will sound on the first

beat of each measure, and clicks will sound for the

remaining beats. Specifying 0 plays a straight click,

without any chime. This setting lets you practice with

a steady beat.

Release the FUNCTION button and then hold

it down again as you press the

METRONOME TEMPO keyboard key.

Keep the FUNCTION button depressed as you

advance to step 5.

Using the Metronome

AP460-ES-1A.indd 14 2014/07/04 17:12:57

English

Playing with Different Tones

EN-13

While holding down the FUNCTION button,

use the TEMPO keys to specify a tempo

value in the range of 20 to 255 beats per

minute.

•Each press of the + or – key raises or lowers the

tempo value by 1.

•You can use the value input keys (0 to 9) to enter a

specific tempo value.

Press the METRONOME button or START/

STOP a button to turn off the metronome.

NOTE

•If you used the value input keys (0 to 9) to input beat

and/or tempo values and the values are within the

allowable setting ranges, the Digital Piano will emit

a high pitch beep when you release the FUNCTION

button. If a value is outside the allowable range, a

low-pitch sound will be emitted.

•You could also use the procedure below in place of

steps 4 and 5 of the above procedure to specify a

tempo value.

–While holding down the METRONOME button,

use the TEMPO keyboard keys to specify a tempo

value in the range of 20 to 255 (beats per minute).

•In step 5 of the above procedure, pressing the + and

– keys at the same time will set the tempo of the

Concert Play lesson tune or Music Library tune that

was last selected on the Digital Piano. Pressing + and

– while recording will return the tempo value to 120.

To adjust the metronome volume

You can perform the following procedure at any time,

regardless of whether or not the metronome is

sounding.

While holding down the FUNCTION button,

use the Metronome Volume keys to specify a

volume value in the range of 0 to 42.

•For details about using the keyboard keys for

settings, see “Keyboard Keys Used for Configuring

Settings” on page EN-29.

•Each press of the T orS key raises or lowers the

metronome volume value by 1.

NOTE

•To return to the initial default setting, press T and

S at the same time.

You can use the Duet Mode to split the Digital Piano’s

keyboard in the center so two people can play a duet.

The left and right side keyboards have virtually the

same range. The left pedal operates as the left side

damper pedal, while the right pedal is the right side

damper pedal.

The Duet Mode is the perfect way to conduct lessons,

with the teacher playing on the left side as the student

playing the same song on the right side.

NOTE

•Only the damper pedal for the right side keyboard

supports half-pedal operations.

Playing a Piano Duet

C3 C4 C5 C6 C3 C4 C5 C6

Keyboard

Split point

Left keyboard Right keyboard

(middle C)(middle C)

Pedals

Left side damper pedal

Left and right side damper pedal

Right side damper pedal

AP460-ES-1A.indd 15 2014/07/04 17:12:57

EN-14

Playing with Different Tones

Select the piano tone you want to use for the

duet.

Example: GRAND PIANO (CLASSIC)

While holding down the FUNCTION button,

press the METRONOME button to toggle

duet on (lamp lit) and off (lamp unlit).

IMPORTANT!

• You cannot use the Duet Mode while recording

(page EN-20).

• The HAMMER RESPONSE, STRING

RESONANCE, and LID SIMULATOR settings

cannot be changed while the Digital Piano is in the

Duet Mode.

NOTE

•You can configure the piano to output the left side

keyboard tone from the left speaker and the right

side keyboard tone from the right speaker while

duet is turned on. For more information, see “Duet

pan” (page EN-30).

Changing the Octaves of the duet

keyboards

You can change the ranges of the left and right

keyboards in octave units from their initial default

settings. This comes in handy, for example, if the initial

default range is not enough when one person is

playing the left hand part and another person is

playing the right hand part.

While holding down the FUNCTION and

METRONOME buttons, press the keyboard

C key that you want located at C4 (middle C)

of the left keyboard. Keep FUNCTION and

METRONOME depressed as you advance to

step 2, below.

•This will sound the note assigned to C4 and change

the octave of the left keyboard.

Example: Press the keyboard key of the leftmost C (C4)

will assign the range shown below.

While still holding down the FUNCTION and

METRONOME buttons, press the keyboard

C key that you want located at C4 (middle C)

of the right keyboard.

•This will sound the note assigned to C4 and change

the octave of the right keyboard.

NOTE

•You can return the keyboards to their initial default

ranges by exiting and then re-entering the Duet

Mode.

C4 C5 C6 C7 C3 C4 C5 C6

Left keyboard Right keyboard

(Pressed key)

1 octave higher than initial

setting Unchanged

AP460-ES-1A.indd 16 2014/07/04 17:12:57

EN-15

English

Using Built-in Songs (Concert Play, Music

Library, Demo Tunes)

Your Digital Piano comes with 10 built-in piano and

orchestra tunes (Concert Play 1 through 10), and 60

piano solos (Music Library 1 to 60).

Concert Play lets you enjoy playing along with

orchestral accompaniment. You can use Music Library

to practice famous piano pieces.

•You can play all 10 Concert Play tunes in sequence,

from beginning to end for your listening enjoyment.

IMPORTANT!

• After you select a built-in song, it can take a number

of seconds for the song data to be loaded. While the

data is being loaded, the keyboard keys and button

operations will be disabled. If you are playing

something on the keyboard, the following operation

will cause output to stop.

While holding down the FUNCTION button,

press the START/STOP a button.

•This will start Concert Play playback from song 1.

•Songs are played in their Concert Play number

sequence.

•You can play along with a song on the keyboard as it

is playing. The tone assigned to the keyboard is the

one that is preset for the song that is playing.

To change demo playback to a different song,

hold down the FUNCTION button as you use

the CONCERT PLAY SELECT keyboard

keys (+ and –) to specify a song number.

•Each press of the + or – key raises or lowers the song

number by 1.

•For information about Concert Play songs, see the

“Concert Play List” on page A-1.

Press the START/STOP a button again to

stop built-in song play.

NOTE

•The tune selection and playback stop operations

described above are the only operations that are

possible during demo tune play.

START/STOP a

FUNCTION SONG RECORDER

Performing Demo Play

AP460-ES-1A.indd 17 2014/07/04 17:12:57

EN-16

Using Built-in Songs (Concert Play, Music Library, Demo Tunes)

Concert Play has recordings of a live orchestra, which

you can use to play along with authentic

accompaniment.

You can also use Concert Play for 3-step practice.

Step 1: LISTEN

Listen to playback of the piano and orchestra to

familiarize yourself with the music.

Step 2: LESSON

Practice the Concert Play piano part.

•You can turn off the left hand part or right hand

part of a built-in song and play along on the piano.

Step 3: PLAY

Play along with the orchestra accompaniment.

•The Concert Play includes 10 songs, numbered 1

through 10.

•The Concert Play contains actual recordings of an

orchestra. Because of this, the instrument sounds are

different from the tones that can be selected with this

piano (page EN-7). This also means that Concert

Play playback includes breath sounds and

performance noises.

To listen to a Concert Play song (LISTEN)

While holding down the FUNCTION button,

use the CONCERT PLAY SELECT + and –

keyboard keys to scroll song numbers in

sequences (from 1 to 10).

•For information about Concert Play songs, see the

“Concert Play List” on page A-1.

While holding down the FUNCTION button,

press the LISTEN keyboard key.

•This enters the Listen Mode for listening to the piano

and orchestra performance.

•Playback tempo is fixed and cannot be changed

during Listen Mode playback.

While holding down the FUNCTION button,

press the CONCERT PLAY a keyboard

key to start playback.

•Playback will stop automatically when the end of the

song is reached.

To stop playback, hold down the FUNCTION

button as you press the CONCERT PLAY

a keyboard key again.

NOTE

•You can use adjust the volume level of the playback,

if you want. See “Configuring Settings with the

Keyboard” (page EN-27) for more information.

Concert Play

Practicing with a Concert Play

Song

AP460-ES-1A.indd 18 2014/07/04 17:12:58

English

Using Built-in Songs (Concert Play, Music Library, Demo Tunes)

EN-17

To practice the piano part (LESSON)

PREPARATION

•You can change tempo of the playback, if you want.

See “Configuring Settings with the Keyboard” (page

EN-27) for more information.

•A number of tunes have tempo changes part way

through in order to produce specific musical effects.

While holding down the FUNCTION button,

press the LESSON keyboard key.

•This enters the Lesson Mode, which allows simple

play along with the piano part.

While holding down the FUNCTION button,

press the RECORDER (L/R) button to select

the part you want to turn off.

•Pressing a button toggles its part on (button lamp on)

and off (button lamp off).

While holding down the FUNCTION button,

press the CONCERT PLAY a keyboard

key.

•This starts playback, without the part you turned off

in step 1.

Play the missing part on the keyboard.

To stop playback, hold down the FUNCTION

button as you press the CONCERT PLAY

a keyboard key again.

To play along with the orchestra

accompaniment (PLAY)

While holding down the FUNCTION button,

press the PLAY keyboard key.

•This will enter the Play Mode, which plays the

orchestra part without the piano part.

While holding down the FUNCTION button,

press the CONCERT PLAY a keyboard

key to start playback.

•Playback tempo is fixed and cannot be changed

during Play Mode playback.

Play the piano part on the keyboard.

To stop playback, hold down the FUNCTION

button as you press the CONCERT PLAY

a keyboard key again.

Left hand Right hand

Both parts on Right hand

part off Left hand

part off

AP460-ES-1A.indd 19 2014/07/04 17:12:58

EN-18

Using Built-in Songs (Concert Play, Music Library, Demo Tunes)

You can use the Music Library for your listening

enjoyment or to practice piano songs.

•The Music Library includes 60 songs, numbered 1

through 60.

•You can also import up to 10 songs* from a

computer to Digital Piano memory, and assign them

Music Library song numbers 61 through 70.

*You can download music data from the Internet and

then transfer it from your computer to Digital Piano

memory. See “Transferring Song Data with a

Computer” on page EN-47 for more information.

Find the song number of the song you want to

play in the “Music Library List” on page A-1.

To change to another song, hold down the

FUNCTION button as you use the MUSIC

LIBRARY SELECT (+, –, 0 to 9) keys to

specify a song number.

•Each press of the + or – key raises or lowers the song

number by 1.

•You can use the value input keys (0 to 9) to enter a

specific song number.

Press the START/STOP a button.

•This starts the playback of the song.

To stop playback, press the START/STOP

a button again.

•Playback will stop automatically when the end of the

song is reached.

NOTE

•Pressing the + and – keys at the same time will select

song number 1.

•You also can adjust the playback tempo and volume

of the song. See “Configuring Settings with the

Keyboard” on page EN-27 for more information.

You can turn off the left hand part or right hand part of

a song and play along on the Digital Piano.

NOTE

•The Music Library includes a number of duets.

While a duet is selected, you can turn off the first

piano (Primo) or second piano (Secondo) tone and

play along with the song.

PREPARATION

•Select the song you want to practice and adjust the

tempo. See step 3 under “Using the Metronome”

(page EN-12).

•A number of tunes have tempo changes part way

through in order to produce specific musical effects.

While holding down the FUNCTION button,

press the SONG RECORDER (L/R) button to

select the part you want to turn off.

•Pressing a button toggles its part on (button lamp on)

and off (button lamp off).

Press the START/STOP a button.

•This starts playback, without the part you turned off

in step 1.

Play the missing part on the keyboard.

To stop playback, press the START/STOP

a button again.

Music Library

Playing Back a Specific Music

Library Song

Practicing with a Music Library

Song

Left hand Right hand

Both parts on Right hand

part off Left hand

part off

AP460-ES-1A.indd 20 2014/07/04 17:12:58

English

Using Built-in Songs (Concert Play, Music Library, Demo Tunes)

EN-19

You can use your Digital Piano to play back audio data

(WAV files*) stored on a commercially available USB

flash drive.

See “USB Flash Drive” on page EN-35 for more

information.

*Linear PCM, 16bit, 44.1 kHz, Stereo

PREPARATION

•Prepare a USB flash drive that contains data

recorded to it using the Digital Piano’s Audio

Recorder. See “Recording to a USB Flash Drive

(Audio Recorder)” on page EN-23 for more

information.

•You can also use a computer to save audio data

(WAV file) to the USB Flash Drive for playback. See

“Storing Standard Audio Data (WAV Files) to a USB

Flash Drive” on page EN-36 for more information.

•Insert the USB flash drive that contains the data you

want to play back into your Digital Piano’s USB

flash drive port.

Press the AUDIO RECORDER button. Note

that you should press the button and

immediately release it. Do not hold it down.

•This causes the two START/STOP a button

indicator lamps to light.

Press the SONG RECORDER button so its

lamp is lit.

Hold down the FUNCTION button as you use

the MUSIC LIBRARY SELECT keyboard

keys to select the song you want.

•Pressing the plus (+) key scrolls forward through

song file names (TAKE01.WAV, TAKE02.WAV, etc.).

Pressing the minus (–) key scrolls backward.

•You also can use the number (0 through 9) keyboard

keys to directly select a file by inputting its number.

The Digital Piano will beep if there is no file on the

USB flash drive that corresponds to the number you

input.

While holding down the AUDIO RECORDER

button, press the START/STOP a button.

•This will start playback of the selected song.

To stop playback of the song, press the

START/STOP a button.

Playing Back Audio Data

Stored on a USB Flash Drive

AP460-ES-1A.indd 21 2014/07/04 17:12:58

EN-20

Recording and Playback

You can use the Song Recorder to record what you play

on the Digital Piano to built-in song memory. When a

commercially available USB flash drive is inserted in

the Digital Piano’s USB flash drive port, audio data is

recorded to and played back from the USB flash drive

(Audio Recorder).

Tracks

A track is a container of recorded data, and a song

consists of two tracks: Track 1 and Track 2. You can

record each track separately and then combine them so

they play back together as a single song.

Memory Capacity

•You can record approximately 5,000 notes in Digital

Piano memory.

•The SONG RECORDER button lamp will flash at

high speed when memory runs low.

•Recording stops automatically if the number of

notes in memory exceeds the maximum.

Recorded Data

•Keyboard play

•Tone used

•Pedal operations

•Hall simulator and chorus settings (Track 1 only)

•Tempo setting (Track 1 only)

•Layer setting (Track 1 only)

•Split setting (Track 1 only)

•Octave shift setting (Track 1 only)

Recording Data Storage

•Starting a new recording deletes any data that was

previously recorded in memory.

•Should power fail during recording, all of the data in

the track you are recording will be deleted.

IMPORTANT!

• CASIO COMPUTER CO., LTD. takes no

responsibility for any damages, lost profits, or claims

by third parties arising from the deletion of recorded

data due to malfunction, repair, or for any other

reason.

START/STOP aMETRONOME

AUDIO RECORDER, FUNCTION SONG RECORDER

Recording to Built-in Song

Memory (Song Recorder)

Track 1 Record While playing

back. . .

Track 2 Record

Song

AP460-ES-1A.indd 22 2014/07/04 17:12:58

English

Recording and Playback

EN-21

Each press of the SONG RECORDER button cycles

through the recording options in the sequence shown

below.

Recording to a Specific Song Track

After recording to either of the tracks of a song, you can

record to the other track while listening to playback

what you recorded in the first track.

Press the SONG RECORDER button twice

so its lamp is flashing.

•At this time the L lamp will flash to indicate that the

Digital Piano is standing by for recording to Track 1.

While holding down the FUNCTION button,

press the SONG RECORDER (L/R) button to

select the track you want to record.

•Make sure that the indicator lamp for the record track

is flashing.

Track 1: L lamp

Track 2: R lamp

Example:Track 1 selected

Select the tone and effects (Track 1 only) you

want to use in your recording.

•Tone (page EN-7)

•Effects (page EN-10)

NOTE

•If you want the metronome to sound while you are

recording, configure the beat and tempo settings,

and then press the METRONOME button. See

“Using the Metronome” on page EN-12 for more

information.

Start playing something on the keyboard.

•Recording will start automatically.

To stop recording, press the START/STOP

a button.

•This will cause the SONG RECORDER button lamp

and the lamp of the track you recorded to change

from flashing to lit.

•To play back the track you just recorded, press the

START/STOP a button.

After you are finished recording or playing

back, press the SONG RECORDER button

so its lamp goes out.

Using the SONG RECORDER

Button

Lit Flashing Off

Playback

Standby Record

Standby Normal

AP460-ES-1A.indd 23 2014/07/04 17:12:59

EN-22

Recording and Playback

Recording to One Track while Listening

to Playback of the Other Track

Press the SONG RECORDER button so its

lamp is lit.

While holding down the FUNCTION button,

press the SONG RECORDER (L/R) button to

select the track you want to play back while

recording.

Press the SONG RECORDER button so its

lamp is flashing.

•This will cause the L lamp to flash.

While holding down the FUNCTION button,

press the SONG RECORDER (L/R) button to

select the track you want to record.

•Make sure that the indicator lamp for the record track

is flashing.

Example:To listen to playback of Track 1 as you record

to Track 2

Select the tone and effects (Track 1 only) you

want to use for your recording.

Press the START/STOP a button or play

something on the keyboard.

•This will start both playback of the recorded track

and recording to the other track.

To stop recording, press the START/STOP

a button.

Playing Back from Digital Piano Memory

Press the SONG RECORDER button so its

lamp is lit.

NOTE

•When a song has something recorded in both tracks,

you can turn off one track and play back just the

other track, if you want.

Press the START/STOP a button.

•This starts playback of the song and/or track you

selected.

NOTE

•You can change the tempo setting as a track is

playing.

•Press the START/STOP a button again to stop

playback.

Lit (Play) Flashing (Record Standby)

AP460-ES-1A.indd 24 2014/07/04 17:12:59

English

Recording and Playback

EN-23

Deleting Recorded Data

The following procedure deletes a specific track of a

song.

IMPORTANT!

• The procedure below deletes all of the data of the

selected track. Note that the delete operation cannot

be undone. Check to make sure you really do not

need the data in Digital Piano memory before you

perform the following steps.

Press the SONG RECORDER button twice

so its lamp is flashing.

While holding down the FUNCTION button,

press the SONG RECORDER (L/R) button to

select the track you want to delete.

Press the SONG RECORDER button until its

lamp is lit.

•This will cause the lamp of the track you selected in

step 2 of this procedure to flash.

Example:If you selected Track 2 for deletion

Once again, hold down the FUNCTION

button as you press the SONG RECORDER

button.

•This deletes the selected track and enters playback

standby.

•To cancel the delete operation at any time, press the

SONG RECORDER button twice so its lamp is unlit.

NOTE

•Only the Digital Piano’s SONG RECORDER (L/R)

button are operational from step 3 until you actually

perform the delete operation in step 4. No other

button operation can be performed.

Anything played on the Digital Piano is recorded to the

USB flash drive as audio data (WAV files*). If you play

along on the Digital Piano as you play back data stored

in song memory, the memory playback and your

keyboard play are both recorded to USB flash drive.

*Linear PCM, 16bit, 44.1 kHz, Stereo

Recording Capacity

•99 files (No. 01 to No. 99)

•Approximately 25 minutes maximum recording per

file.

Recorded Data

•Anything played on the Digital Piano is recorded.

•Individual part recording is not supported.

Recording Data Storage

Each new recording of audio data to a USB flash drive

is automatically assigned a new file name, so existing

data is not overwritten.

Recording Digital Piano Play

(Audio Recorder)

PREPARATION

•Be sure to format the USB flash drive on the Digital

Piano before using it. See “USB Flash Drive” on page

EN-35 for more information.

Insert the USB flash drive into the Digital

Piano’s USB flash drive port.

•When you plug in a USB flash drive, the Digital Piano

initially needs to “mount” the USB flash drive and

prepare for data exchange. Note that Digital Piano

operations are momentarily disabled while a USB

flash drive mounting sequence is being performed.

The Digital Piano’s L/R lamps flash while the

mounting process is in progress. It may take up to 10

or 20 seconds or even longer for a USB flash drive to

be mounted. Do not attempt to perform any

operation on the Digital Piano while a mounting

sequence is in progress (while L/R lamps are

flashing). A USB flash drive needs to be mounted

each time it is connected to the Digital Piano.

Off Flashing: Delete standby

Recording to a USB Flash

Drive (Audio Recorder)

AP460-ES-1A.indd 25 2014/07/04 17:12:59

EN-24

Recording and Playback

Press the AUDIO RECORDER button. Note

that you should press the button and

immediately release it. Do not hold it down.

•This causes the two START/STOP a button

indicator lamps to light.

Press the SONG RECORDER button so its

lamp is lit.

Start playing something on the keyboard.

•The SONG RECORDER button lamp will flash once

or twice to indicate that recording to the USB flash

drive has started.

NOTE

•Do not remove the USB flash drive from the USB

flash drive port while the two START/STOP a

lamps are flashing or lit. Doing so will interrupt

recording and may corrupt data.

To stop recording, press the AUDIO

RECORDER button.

•The two START/STOP a button lamps will flash

together three or four times to let you know that

audio recording is complete. If you want to continue

recording, perform the operations from step 4 of this

procedure. If you want to play back what you

recorded, perform the operations from step 3 under

“Playing Back Data Recorded on a USB Flash Drive”

(page EN-25). To exit the audio record/playback

operation, press the AUDIO RECORDER button.

Recording Digital Piano Play as Data

Recorded in Song Memory Plays Back

(Audio Recorder)

Press the AUDIO RECORDER button. Note

that you should press the button and

immediately release it. Do not hold it down.

•This causes the two START/STOP a button

indicator lamps to light.

Press the SONG RECORDER button so its

lamp is lit.

Press the START/STOP a button.

•This will start playback of the current song memory

contents. Play along on the Digital Piano.

To stop recording, press the AUDIO

RECORDER button.

•The two START/STOP a button lamps will flash

together three or four times to let you know that

audio recording is complete. If you want to continue

recording, perform the operations from step 4 under

“Recording Digital Piano Play (Audio Recorder)”

(page EN-23). If you want to play back what you

recorded, perform the operations from step 3 under

“Playing Back Data Recorded on a USB Flash Drive”

(page EN-25). To exit the audio record/playback

operation, press the AUDIO RECORDER button.

AP460-ES-1A.indd 26 2014/07/04 17:12:59

English

Recording and Playback

EN-25

Playing Back Data Recorded on a USB

Flash Drive

Press the AUDIO RECORDER button. Note

that you should press the button and

immediately release it. Do not hold it down.

•This causes the two START/STOP a button

indicator lamps to light.

Press the SONG RECORDER button so its

lamp is lit.

While holding down the AUDIO RECORDER

button, press the START/STOP a button.

•This starts playback of the last song you recorded.

To select a file and play it

Hold down the FUNCTION button as you use the

MUSIC LIBRARY SELECT keyboard keys to select the

song you want.

•Press the minus (–) keyboard key to scroll back

through songs in reverse chronological order.

•Press the plus (+) keyboard to key scrolls forward.

•You also can use the number keyboard keys

(0 through 9) to inputting a file number (1 to 99) and

directly select a file (TAKE01.WAV, TAKE02.WAV,

etc.). The keyboard will beep if there is no file on the

USB flash drive that corresponds to the number you

input.

To stop playback of the song, press the

START/STOP a button.

Adjusting the Audio Recorder Volume

Level

You can use the procedure below to adjust the volume

level of audio data recorded to a USB flash drive.

While holding down the FUNCTION button,

use the Audio Recorder Volume keyboard

keys to adjust the volume level.

•For details about using the keyboard keys for

settings, see “Keyboard Keys Used for Configuring

Settings” (page EN-29).

•Each press of the + (increase) or – (decrease)

keyboard key changes the volume value by 1.

NOTE

•To return to the initial default setting, press the +

and – keyboard keys at the same time.

AP460-ES-1A.indd 27 2014/07/04 17:12:59

EN-26

Recording and Playback

Deleting an Audio File from a USB Flash

Drive

Files can be deleted one at a time.

IMPORTANT!

• The procedure below deletes all of the data of the

selected file. Note that the delete operation cannot

be undone. Check to make sure you really do not

need the data in Digital Piano memory before you

perform the following steps.

Press the AUDIO RECORDER button. Note

that you should press the button and

immediately release it. Do not hold it down.

•This causes the two START/STOP a button

indicator lamps to light.

Press the SONG RECORDER button twice

so its lamp is flashing.

If you want to delete the last file you

recorded, jump directly to step 4.

To select a file and delete it

Hold down the FUNCTION button as you use the

MUSIC LIBRARY SELECT keyboard keys to select the

song you want.

•Press the minus (–) keyboard key to scroll back

through songs in reverse chronological order.

•Press the plus (+) keyboard to key scrolls forward.

•You also can use the number keyboard keys

(0 through 9) to inputting a file number (1 to 99) and

directly select a file (TAKE01.WAV, TAKE02.WAV,

etc.). The keyboard will beep if there is no file on the

USB flash drive that corresponds to the number you

input.

Hold down the SONG RECORDER button

until both the L and R lamps flash.

Once again, hold down the FUNCTION

button as you press the SONG RECORDER

button.

•The Digital Piano will enter the song recorder

playback mode after file deletion is complete.

•To cancel the delete operation at any time, press the

SONG RECORDER button twice so its lamp is unlit.

NOTE

•When you record a new file, it is always

automatically assigned the next new file number in

the sequence of files currently on the USB flash

drive, even if a previous number is unused (because

a file was deleted). For example, if a USB flash drive

contains files numbered 01, 02, 04, 07, 08, the next

file recorded to the USB flash drive will be assigned

file number 09.

AP460-ES-1A.indd 28 2014/07/04 17:12:59

EN-27

English

Configuring Settings with the Keyboard

In addition to selecting tones and songs (Concert Play

or Music Library), you also can use the FUNCTION

button in combination with the keyboard keys to

configure effect, keyboard touch, and other settings.

Use the “Parameter List” on pages EN-30 -

EN-34 to find the setting you want to

configure, and note its details.

Use “Keyboard Keys Used for Configuring

Settings” on page EN-29 to find the location

on the keyboard for configuring the setting

you want.

While holding down the FUNCTION button,

press the keyboard key for the setting you

want to configure.

•The Digital Piano will sound an operation tone after it

configures the setting.

Example:To lower the transpose setting by one

semitone

Release the FUNCTION button to complete

the setting procedure.

NOTE

•You can configure the Digital Piano so no operation

tone sounds in step 3. For details, see “dk Operation

tone” under “Parameter List” on pages EN-30 -

EN-34.

FUNCTION

To configure settings with the

keyboard

Transpose T key

AP460-ES-1A.indd 29 2014/07/04 17:13:00

EN-28

Configuring Settings with the Keyboard

Keyboard Setting Operation Types

There are four types of operations that you can perform

while configuring settings with the keyboard keys:

Type A, Type B, Type C, and Type D.

Example: Pressing the STRINGS 1 keyboard key to select

the STRINGS 1 tone

•Holding down a key raises or lowers the setting at

high speed.

•To return to the initial default setting, press both

keys at the same time.

Example: To enter “20”, press keys 2, 0.

•When you press a key, the Digital Piano will beep to

let you know which setting is selected.

•A long beep indicates that the applicable setting is

turned off.

Example: While chorus is turned off, pressing the

CHORUS keyboard key twice will cause the

Digital Piano to beep twice, which indicates that

the Medium Chorus setting is selected.

NOTE

•You can find out what operation type applies to each

setting by checking the “Operation Type” in the

“Parameter List” on pages EN-30 - EN-33.

Type A : Direct input

Type B: Raising or lowering a setting using the + and

– or T and S keyboard keys

Type C: Value input using the numeric keys (0 to 9)

Type D: Toggling or cycling through settings by

pressing a keyboard key

AP460-ES-1A.indd 30 2014/07/04 17:13:00

Configuring Settings with the Keyboard

EN-29

English

•The numbers 1 through dr correspond to the same numbers in the “Parameter List” on pages EN-30 - EN-34.

Keyboard Keys Used for Configuring Settings

 

OFF

− + − +

− +

− + − + − + − + − +− +

[Left keyboard]

[Overall]

[Center keyboard]

[Right keyboard]

6Music Library song Select/Tempo/Beat/

Temperament select

2Local control

3Send channel

5Base note

4Temperament

dnUSB flash drive mode

doFormat

dpSave

dqLoad

drDelete

1USB device mode

bnConcert Play song select

bpHall simulator

boConcert Play volume

7Metronome tempo

8Metronome beat

bqTone selection

bmPlay

blLesson

9Concert Play song Play/Stop

bkListen

bqTone selection

brChorus dmOperation lock

bsTouch response

btBrilliance

ckKeyboard key (Transpose)

clMusic Library volume (ML Volume)

cmMetronome volume

cnLayer balance

coKeyboard tuning (Tuning) cpOctave shift

ctDamper noise

dkOperation tone

dlBack up

cqAudio recorder volume

crDuet pan

csBass damper effect

AP460-ES-1A.indd 31 2014/07/04 17:13:00

EN-30

Configuring Settings with the Keyboard

■Tones

Parameter List

Parameter Settings

Operation

Type

(page

EN-28)

Description Remarks

bp Hall simulator Off (OFF), DUTCH

CHURCH to

FRENCH

CATHEDRAL

Default:

STANDARD

HALL

A Specifies the hall simulator of

notes. (page EN-10)

bq Tone selection See page EN-7.

Default: GRAND

PIANO

(CONCERT)

AAssigns a tone to the keyboard.

(page EN-7)

br Chorus

(CHORUS)

Off (OFF), 1 to 4

Default: Off

D Controls the breadth of notes.

(page EN-10)

bt Brilliance

(BRILLIANCE)

–3 to 0 to 3

Default: 0

BSpecifies the brilliance of notes.

Pressing [+] makes notes brighter

and harder. Pressing [–] makes

notes mellower and softer.

• To return the setting to its initial default

(0), press [+] and [–] at the same time.

cn Layer balance –24 to 0 to 24

Default: –10

B Specifies the volume balance

between the main tone and the

layered tone. (page EN-9)

• To return the setting to its initial default

(–10), press [+] and [–] at the same time.

cr Duet pan Off (OFF), On (ON)

Default: Off

DWhen turned on, outputs the left

side keyboard tone from the left

speaker and the right side

keyboard tone from the right

speaker while duet is turned on.

(page EN-13)

• Supported only when a piano tone is being

used. Hall simulator is not applied when

this parameter is turned on.

cs Bass damper

effect

Off (OFF), On (ON)

Default: Off

D When turned on and the BASS

(LOWER) tone is selected, pressing

the damper pedal or sostenuto

pedal will apply sustained

reverberation to the BASS

(LOWER) tone. (page EN-8)

ct Damper noise Off (OFF), On (ON)

Default: On

DEnables/disables damper noise

output. (page EN-12)

AP460-ES-1A.indd 32 2014/07/04 17:13:00

Configuring Settings with the Keyboard

EN-31

English

■Song/Metronome

Parameter Settings

Operation

Type

(page

EN-28)

Description Remarks

6Music Library

song select

(MUSIC

LIBRARY

SELECT)

1 to 70

Default: 1

Selects a Music Library tune.

(page EN-18)

• This setting cannot be changed while

recording.

• This setting cannot be changed while

Concert Play playback is in progress.

6Tempo

(TEMPO)

20 to 255

Default: 120

Specifies the tempo of Concert Play

Lesson Mode songs, Music Library

songs, the metronome, recording

and playback, etc. (page EN-12)

• During recording, pressing + and – at the

same time sets a value of 120.

6Beat (BEAT) 0 to 9

Default: 4

C Specifies the metronome beat.

(page EN-12)

7Metronome

tempo

(METRONOME

TEMPO)

– – Enters a setting mode for

specifying the metronome tempo

with keyboard keys. Use the 6

TEMPO keyboard keys to input a

tempo value. (page EN-12)

• The metronome tempo setting cannot be

configured while playback of a Concert

Play song is in progress in the LISTEN

mode or PLAY mode.

8Metronome

beat

(METRONOME

BEAT)

– – Enters a setting mode for

specifying the metronome beat

with keyboard keys. Use the 6

BEAT keyboard keys to input a

beat value. (page EN-12)

• The metronome beat setting cannot be

changed while Concert Play or Music

Library playback is in progress.

9Concert Play

song Play/Stop

(CONCERT

PLAY a)

Play, Stop DToggles a Concert Play song

between play and stop. (page

EN-16)

• This setting cannot be changed while

recording.

bk Listen (LISTEN) – A Enters the Concert Play Listen

Mode. (page EN-16)

• This setting cannot be changed while

recording.

• This setting cannot be changed while Music

Library playback is in progress.

bl Lesson

(LESSON)

– A Enters the Concert Play Lesson

Mode. (page EN-17)

• This setting cannot be changed while

recording.

• This setting cannot be changed while Music

Library playback is in progress.

bm Play (PLAY) – A Enters the Concert Play Play Mode.

(page EN-17)

• This setting cannot be changed while

recording.

• This setting cannot be changed while Music

Library playback is in progress.

bn Concert Play

song select

(SELECT +/–)

1 to 10

Default: 1

BSpecifies a Concert Play song

number. (page EN-16)

• This setting cannot be changed while

recording.

• This setting cannot be changed while Music

Library playback is in progress.

bo Concert Play

volume

(VOLUME +/–)

0 to 42

Default: 42

B Sets the volume level of Concert

Play playback.

• This setting cannot be changed while

recording.

• This setting cannot be changed while Music

Library playback is in progress.

cl Music Library

volume

(ML Volume)

0 to 42

Default: 42

BSets the volume level of Music

Library playback.

• This setting cannot be changed while

recording.

• This setting cannot be changed while

Concert Play playback is in progress.

cm Metronome

volume

0 to 42

Default: 36

B Specifies the metronome volume.

(page EN-13)

AP460-ES-1A.indd 33 2014/07/04 17:13:01

EN-32

Configuring Settings with the Keyboard

■Keyboard

Parameter Settings

Operation Type

(page EN-28)

Description Remarks

Temperament

Base note

Temperament

select

Temperament:

0 to 16

Base note:

–, +, 0 to 9 (C to B)

Defaults:

Temperament: 0

(Equal Temperament)

Base note

: C

While holding down the

FUNCTION

button, press the

applicable keyboard keys as described

below.

1. Press the

Temperament

keyboard key.

2. Use the

Temperament Select

keyboard keys to select the desired

temperament.

• If you want to advance directly

base note selection from here,

release the

FUNCTION

button and continue with the

procedure below.

While holding down the

FUNCTION

button, press the

applicable keyboard keys as described

below.

1. Press the

Base Note keyboard

key.

2. Use the

numeric input (–, +, 0 to

9) keyboard keys to specify a base

note.

You can change the

scale (tuning

system) of the

keyboard from

standard equal

temperament to

another tuning that

is more suitable for

playing Indian

music, Arabic

music, classical

pieces, etc.

• When you select

any temperament

other than

“Equal”, you must

also configure a

base note (base

note of the

temperament of

the song being

performed)

setting.

• For details about

temperament,

refer to a book that

covers music

theory.

0: Equal /

1: Pure Major /

2: Pure Minor /

3: Pythagorean /

4: Kirnberger 3 /

5: Werckmeister /

6: Mean-Tone /

7: Rast /

8: Bayati /

9: Hijaz /

10: Saba /

11: Dashti /

12: Chahargah /

13: Segah /

14: Gurjari Todi /

15: Chandrakauns /

16: Charukeshi

–: C / +: C#/ 0: D / 1: Eb/ 2: E /

3: F / 4: F#/ 5: G / 6: Ab/ 7: A /

8: Bb/ 9: B

• This setting cannot be changed

while Concert Play playback is

in progress.

bs Touch response

(TOUCH

RESPONSE)

Off (OFF), 1 to 3

Default: 2

DSpecifies the

relative touch of the

keyboard keys.

Setting a smaller

value causes lighter

touch to produce

more powerful

sound.

Each press of the keyboard key

causes it to beep the number of

times shown below to indicate the

current setting.

Once (long): Off

Once (short): 1

Twice: 2

Three times: 3

ck Keyboard key

(Transpose)

(TRANSPOSE)

–12 to 0 to 12

Default: 0

B Raises or lowers the

tuning of the Digital

Piano in semitone

steps.

• The transpose setting cannot be

configured while Concert Play

or Music Library playback is in

progress, or while in the Duet

Mode.

• Raising the key of the Digital

Piano can cause notes the

highest part of the range to

become distorted.

co Keyboard

tuning (Tuning)

415.5Hz to 440.0Hz

to 465.9Hz

Default: 440.0Hz

BRaises or lowers the

overall pitch of the

Digital Piano in

0.1Hz steps from

the standard pitch

of A4 = 440.0Hz.

• The pitch setting cannot be

changed while Concert Play or

Music Library playback is in

progress.

cp Octave shift –2 to 0 to 2

Default: 0

B Change the range of

the keyboard in

octave units.

• You can configure octave shift

settings for the main tone part

and layered tone part.

• You cannot configure octave

shift settings for split tone parts.

AP460-ES-1A.indd 34 2014/07/04 17:13:01

Configuring Settings with the Keyboard

EN-33

English

■MIDI and Other Settings

Parameter Settings

Operation

Type

(page

EN-28)

Description Remarks

1USB device

mode

MIDI, Storage

Default: MIDI

D The Digital Piano enters MIDI

mode automatically when it is

connected to a computer by a USB

cable. Select storage when saving

Recorder memory song data to a

computer or when loading

computer song data to Digital

Piano memory. (page EN-47)

• While Storage is selected for this setting,

the GRAND PIANO (CONCERT,

MODERN) and ELEC. PIANO 1 button

lamps flash, and all other lamps are unlit.

• All Digital Piano operations are disabled

at this time.

• Each press of the USB device mode

keyboard key toggles between the MIDI

and storage modes.

2Local control Off, On

Default: On

DSelecting “Off” for Local control

cuts off the Digital Piano’s sound

source, so no sound is produced by

the Digital Piano when keys are

pressed.

• The Local control setting cannot be

changed while Concert Play or Music

Library playback is in progress.

3Send channel 1 to 16

Default: 1

B Specifies one of the MIDI channels

(1 through 16) as the Send channel,

which is used for sending MIDI

messages to an external device.

cq Audio Recorder

Volume

00 to 42

Default: 42

BYou can adjust the volume level of

audio data recorded to a USB flash

drive.

• The volume level cannot be adjusted

while recording.

dk Operation tone Off, On

Default: On

D Selecting “Off” disables sounding

of the operation tone whenever a

keyboard key is pressed while the

FUNCTION is depressed.

• This setting is retained even when the

Digital Piano is turned off.

• The operation tone setting cannot be

changed while Concert Play or Music

Library playback is in progress, while the

metronome is sounding, and during

recording.

dl Back up Off, On

Default: Off

DWhen “On” is selected for this

setting, the Digital Piano will

remember its current settings*1,

and restore them when it is turned

on again.

When “Off” is selected, settings*2

are reset to their initial defaults

whenever the Digital Piano is

turned on.

• The back up setting cannot be changed

while Concert Play or Music Library

playback is in progress, while the

metronome is sounding, in the Duet

Mode, and during recording.

The following settings are not remembered.

• Duet Mode

• Tune LR (part)

• Local control

Except for the operation tone on/off

setting.

dm Operation lock Off, On

Default: Off

D Selecting “On” for this setting locks

the Digital Piano’s buttons (except

for the P (Power) button and the

buttons required for unlock), so no

operation can be performed.

Turn on operation lock when you

want to protect against

unintentional button operations.

• The operation lock setting cannot be

changed while Concert Play or Music

Library playback is in progress, while the

metronome is sounding, and during

recording.

AP460-ES-1A.indd 35 2014/07/04 17:13:01

EN-34

Configuring Settings with the Keyboard

dn USB flash drive

mode

Off, On

Default: Off

–

USB flash drive mode.

do Format Off, On

Default: Off

–

Formats a USB flash drive.

dp Save Off, On

Default: Off

–

Stores data to a USB flash drive.

dq Load Off, On

Default: Off

–

Loads data from a USB flash drive to Digital Piano song memory.

dr Delete Off, On

Default: Off

–

Deletes USB flash drive data.

Parameter Settings

Operation

Type

(page

EN-28)

Description Remarks

AP460-ES-1A.indd 36 2014/07/04 17:13:01

EN-35

English

USB Flash Drive

Your Digital Piano supports the following USB flash

drive operations.

■Supported USB Flash Drives

Capacity: 32GB or less recommended

IMPORTANT!

• Operation of the above type of USB flash drive has

been confirmed, but this does not guarantee

operation.

• Use a FAT (FAT32) format USB flash drive.

• You may not be able to use a USB flash drive that is

recognized as multiple drives on your computer.

• A USB flash drive that is recognized as a CD-ROM

on your computer is not supported.

• A USB flash drive with an anti-virus function and/or

security functions is not supported.

■Data Types Supported by the Digital Piano

START/STOP a

FUNCTION

zDirect recording of keyboard play to the USB flash

drive as audio (.WAV) data

)See “Recording to a USB Flash Drive (Audio

Recorder)” (page EN-23).

zDirect playback of audio (.WAV) data stored on a

USB flash drive

)See “Storing Standard Audio Data (WAV Files)

to a USB Flash Drive” (page EN-36) and “Playing

Back Audio Data Stored on a USB Flash Drive”

(page EN-19).

zUsing the Song Recorder to save recorded song

(.MID) data to a USB flash drive

)See “Saving a Recorded Song to a USB Flash

Drive” (page EN-39)

zLoading of song (.MID, .CM2) data stored on a USB

flash drive to a Digital Piano user song number

)See “Loading Song Data from a USB Flash Drive

into Digital Piano Memory” (page EN-40)

zDirect playback of song (.MID, .CM2) data from a

USB flash drive

)See “Simple Play Back of a Song on a USB Flash

Drive” (page EN-43).

zSee “Formatting a USB Flash Drive” (page EN-38).

zSee “Deleting Data from a USB Flash Drive” (page

EN-42)

.MID : Can be stored in Digital Piano memory, on a

USB flash drive, or on a computer (connected

via USB).

.CM2 : Can be stored in Digital Piano memory, on a

USB flash drive, or on a computer (connected

via USB).

.CSR : Can be stored in Digital Piano memory or on a

computer (connected via USB).

.WAV: Can be saved on a USB flash drive.

AP460-ES-1A.indd 37 2014/07/04 17:13:01

EN-36

USB Flash Drive

■Save and Load Data Formats and Capacities

*Can be converted to a standard MIDI file (SMF

format 0, file name extension .MID) and saved.

NOTE

•Since audio data can be directly recorded to and

played back from a USB flash drive, there is no need

to store or load it into Digital Piano memory.

Performing a record operation with the Digital Piano’s

audio recorder creates a folder named AUDIO on the

USB flash drive. WAV files are stored in the AUDIO

folder, automatically assigning them names from

TAKE01.WAV to TAKE99.WAV. You also can connect

a USB flash drive to a computer and change the names

of audio data (WAV) files to the format

“TAKEXX.WAV”*, and move them to the AUDIO

folder. Then you will be able to play them back on the

Digital Piano.

*XX = 01 to 99

For information about playback see “Playing Back

Audio Data Stored on a USB Flash Drive” (page

EN-19).

Data Type Description

(File Name Extension)

Supported

Operations

Save to

USB

flash

drive

Load

from

USB

flash

drive

User songs

(page

EN-47)

One of the following two

types of music data

1. CASIO format data

(CM2)

2. Standard MIDI files

(MID)

SMF Format 0 or

Format 1

–O

Songs

recorded

with song

recorder

(page

EN-20)

Song data recorded on

this Digital Piano (MID)

O*–

Storing Standard Audio Data

(WAV Files) to a USB Flash

Drive

\AUDIO

TAKE01.WAV

TAKE02.WAV

TAKE99.WAV

USB flash drive

.WAV files

AP460-ES-1A.indd 38 2014/07/04 17:13:01

English

USB Flash Drive

EN-37

USB Flash Drive and USB Flash Drive

Port Handling Precautions

IMPORTANT!

• Be sure to observe the precautions provided in the

documentation that comes with the USB flash drive.

• Avoid using a USB flash drive under the following

conditions. Such conditions can corrupt data stored

on the USB flash drive.

• Areas subjected to high temperature, high

humidity, or corrosive gas

• Areas subjected to strong electrostatic charge and

digital noise

• Never remove the USB flash drive while data is

being written to or loaded from it. Doing so can

corrupt the data on the USB flash drive and damage

the USB flash drive port.

• Never insert anything besides a USB flash drive into

the USB flash drive port. Doing so creates the risk of

malfunction.

• A USB flash drive can become warm after very long

use. This is normal and does not indicate

malfunction.

• Static electricity conducted to the USB flash drive

port from your hand or from a USB flash drive can

cause malfunction of the Digital Piano. If this

happens, turn the Digital Piano off and then back on

again.

IMPORTANT!

• Never plug any other device besides a USB flash

drive into the USB flash drive port.

• When you plug in a USB flash drive, the Digital

Piano initially needs to “mount” the USB flash drive

and prepare for data exchange. Note that Digital

Piano operations are momentarily disabled while a

USB flash drive mounting sequence is being

performed. The Digital Piano’s L/R lamps flash while

the mounting process is in progress. It may take up

to 10 or 20 seconds or even longer for a USB flash

drive to be mounted. Do not attempt to perform any

operation on the Digital Piano while a mounting

sequence is in progress (while L/R lamps are

flashing). A USB flash drive needs to be mounted

each time it is connected to the Digital Piano.

■To insert a USB flash drive

As shown in the illustration below, insert the

USB flash drive into the Digital Piano’s USB

flash drive port.

•Carefully push the USB flash drive in as far as it will

go. Do not use undue force when inserting the USB

flash drive.

■To remove a USB flash drive

Check to confirm that there is no data

exchange operation being performed, and

then pull the USB flash drive straight out.

Copyrights

You are allowed to use recordings for your own

personal use. Any reproduction of an audio or music

format file, without the permission of its copyright

holder, is strictly prohibited under copyright laws

and international treaties. Also, making such files

available on the Internet or distributing them to third

parties, regardless of whether such activities are

conducted with or without compensation, is strictly

prohibited under copyright laws and international

treaties. CASIO COMPUTER CO., LTD. shall not be

held in any way liable for any use of this Digital

Piano that is illegal under copyright laws.

Connecting a USB Flash Drive

to and Detaching It from the

Digital Piano

USB flash drive

USB flash drive port

AP460-ES-1A.indd 39 2014/07/04 17:13:02

EN-38

USB Flash Drive

IMPORTANT!

• Be sure to format a USB flash drive on the Digital

Piano before using it for the first time.

• Before formatting a USB flash drive, make sure it

does not have any valuable data stored on it.

• The format operation performed by this Digital Piano

is a “quick format”. If you want to completely delete

all of the data in USB flash drive, format it on your

computer or some other device.

This Digital Piano supports USB flash drives formatted

to FAT32. If your USB flash drive is formatted to a

different file system, use the Windows format function

to reformat it to FAT32. Do not use quick format.

■USB Flash Driver Folder Structure Diagram

Formatting a USB flash drive on the Digital Piano will

automatically create the folders shown in the diagram

below.

Insert the USB flash drive you want to format

into the Digital Piano’s USB flash drive port.

While holding down the FUNCTION button,

press the keyboard key that corresponds to

the USB flash drive mode.

•This will cause the L/R lamps to flash.

While holding down the FUNCTION button,

press the format keyboard key.

•This will cause the SONG RECORDER button lamp

to light.

•To cancel the format operation, hold down the

FUNCTION button as you press the USB flash drive

mode key.

Formatting a USB Flash Drive

\AUDIO

TAKE01.WAV

TAKE02.WAV

TAKE99.WAV

\MUSICLIB

AAAA.MID

BBBB.CM2

CCCC.MID

\70

\62

\61

.MID files or .CM2 files

.WAV files

USB flash drive

Flashing

Lit

Flashing

AP460-ES-1A.indd 40 2014/07/04 17:13:02

English

USB Flash Drive

EN-39

Press the START/STOP a button.

•This starts formatting.

•After formatting is complete, the L/R lamps will light

and the Digital Piano will exit the formatting

operation.

NOTE

•Formatting a large-capacity USB flash drive can take

several minutes.

Use the procedure below to save data you recorded on

the Digital Piano to a USB flash drive as a MIDI file

(SMF format 0).

Insert the USB flash drive into the Digital

Piano’s USB flash drive port.

While holding down the FUNCTION button,

press the keyboard key that corresponds to

the USB flash drive mode.

•This will cause the L/R lamps to flash.

While holding down the FUNCTION button,

press the save keyboard key.

•This will cause the GRAND PIANO (CONCERT)

button lamp to light.

•To exit the data save operation, hold down the

FUNCTION button as you press the USB flash drive

mode key.

Hold down the FUNCTION button as you use

the MUSIC LIBRARY SELECT keyboard

keys to select a song number (61 to 70).

•The Digital Piano will emit a short beep if you specify

a correct song number, and a long beep if the song

number is not correct.

Saving a Recorded Song to a

USB Flash Drive

Flashing Lit

Formatting

started Formatting

complete

Flashing

Lit

AP460-ES-1A.indd 41 2014/07/04 17:13:02

EN-40

USB Flash Drive

Press the START/STOP a button.

•This starts the data save operation.

•When saving is complete, the L/R lamps will light to

indicate that the USB flash drive mode has been

exited.

■USB Flash Drive Data (File) Storage

Locations

The above procedure stores piano data in a folder

named MUSICLIB on the USB flash drive.

•The MUSICLIB folder is created automatically when

you format the USB flash drive on the Digital Piano

(page EN-38).

•Note that files not in the MUSICLIB folder cannot be

loaded or deleted by this Digital Piano.

•The “MUSICLIB” folder contains sub-folders named

“61” through “70”. Data is saved in the sub-folder

whose name corresponds to the song number you

specify in step 4 of the procedure above.

You can use the procedure below to load user song

data (page EN-47) from a USB flash drive to the Digital

Piano’s Music Library (song numbers 61 to 70). After

that, you can play back the user song or use it for

lesson play.

NOTE

•Loading song data from a USB flash drive assigns it

to the corresponding user song number. Loading

song data 61 from a USB flash drive, for example,

will assign it to user song number 61 in Digital Piano

memory. Then you will be able to select the song by

selecting user (Music Library) song 61.

On your computer, copy the file you want to

load to one of the numbered sub-folders (61

through 70) inside the “MUSICLIB” folder on

the USB flash drive.

•The number names of the sub-folders correspond to

the Digital Piano’s user song numbers (61 to 70).

Insert the USB flash drive into the Digital

Piano’s USB flash drive port.

Flashing Lit

Save started Save complete

Loading Song Data from a

USB Flash Drive into Digital

Piano Memory

\MUSICLIB

\70

\62

\61

\MUSICLIB

\70

\62

\61

\PIANO \

.MID files or

.CM2 files

.MID files or

.CM2 files

USB flash driveDigital Piano memory

AP460-ES-1A.indd 42 2014/07/04 17:13:02

English

USB Flash Drive

EN-41

While holding down the FUNCTION button,

press the keyboard key that corresponds to

the USB flash drive mode.

•This will cause the L/R lamps to flash.

While holding down the FUNCTION button,

press the load keyboard key.

•This will cause the GRAND PIANO (MODERN)

button lamp to light.

•To cancel the load operation, hold down the

FUNCTION button as you press the USB flash drive

mode key.

Hold down the FUNCTION button as you use

the MUSIC LIBRARY SELECT keyboard

keys to select a song number (61 to 70).

•The Digital Piano will emit a short beep if you specify

a correct song number, and a long beep if the song

number is not correct.

•Selecting song number 00 will batch load the 10 files

from 61 through 70 to the Digital Piano’s song

memory.

Press the START/STOP a button.

•This starts loading of the data to the Music Library

user song area.

•When loading is complete, the L/R lamps will light to

indicate that the USB flash drive mode has been

exited.

Flashing

Lit

Flashing Lit

Loading start Loading complete

AP460-ES-1A.indd 43 2014/07/04 17:13:03

EN-42

USB Flash Drive

You can use the procedure below to delete song data

stored in the “MUSICLIB” folder on a USB flash drive.

Insert the USB flash drive into the Digital

Piano’s USB flash drive port.

While holding down the FUNCTION button,

press the keyboard key that corresponds to

the USB flash drive mode.

•This will cause the L/R lamps to flash.

While holding down the FUNCTION button,

press the delete keyboard key.

•This will cause the ELEC. PIANO 1 button lamp to

light.

•To exit the data delete operation, hold down the

FUNCTION button as you press the USB flash drive

mode key.

Hold down the FUNCTION button as you use

the MUSIC LIBRARY SELECT keyboard

keys to select a song number (61 to 70).

•The Digital Piano will emit a short beep if you specify

a correct song number, and a long beep if the song

number is not correct.

Press the START/STOP a button.

•This starts deletion of the selected data.

•When deleting is complete, the L/R lamps will light

to indicate that the USB flash drive mode has been

exited.

Deleting Data from a USB

Flash Drive

Flashing

Lit

Flashing Lit

Delete start Delete complete

AP460-ES-1A.indd 44 2014/07/04 17:13:03

English

USB Flash Drive

EN-43

You can use the procedure below to play back a user

song (page EN-47) stored on a USB flash drive without

loading the song into Digital Piano Music Library

memory (song numbers 61 to 70).

On your computer, copy the data you want to

play back on the Digital Piano into the

MUSICLIB folder on the USB flash drive.

•Of the song data in the MUSICLIB folder, you can

select any of the first 99 songs, sorted in file name

sequence, for playback.

Insert the USB flash drive into the Digital

Piano’s USB flash drive port.

While holding down the FUNCTION button,

press the keyboard key that corresponds to

the USB flash drive mode.

•This will cause the L/R lamps to flash.

Press the START/STOP a button.

•This will start playback of the song data.

•Press the START/STOP a button again to stop

playback.

To change to another song, hold down the

FUNCTION button as you use the MUSIC

LIBRARY SELECT plus (+) and minus (–)

keyboard keys to select the song you want to

hear.

•Pressing the plus (+) or minus (–) key scrolls through

song file names.

•You can use the value input keys (0 to 9) to enter a

specific song number.

To exit the USB flash drive song playback

function, hold down the FUNCTION button as

you press the USB flash drive mode key.

Simple Play Back of a Song on

a USB Flash Drive

AP460-ES-1A.indd 45 2014/07/04 17:13:03

EN-44

USB Flash Drive

The following shows how the lamps indicate the error type when an error occurs due to data transfer failure or

some other reason.

Error Indicators

Lamps Error Type Cause Action

No Media

1. The USB flash drive is

not connected to the

Digital Piano’s USB

flash drive port.

1. Correctly plug the USB

flash drive into the USB

flash drive port.

2. The USB flash drive

was removed while

some operation was in

progress.

2. Do not remove the USB

flash drive while any

operation is in

progress.

3. The USB flash drive is

write-protected.

3. Unprotect the USB

flash drive.

4. The USB flash drive has

anti-virus software.

4. Use a USB flash drive

that does not have anti-

virus software.

No File

There is no loadable file in

the “MUSICLIB” folder or

no playable file in the

“AUDIO” folder.

Move the file you want to

load into the “MUSICLIB”

folder or the file you want

to play into the “AUDIO”

folder (pages EN-36 and

EN-39).

No Data

You are attempting to save

data to a USB flash drive

when there is no data to

save.

Record something before

performing a save

operation.

Read Only

A read-only file with the

same name you are trying

to use is already stored on

USB flash drive.

• Change the name and

then save the new data.

• Remove the read-only

attribute from the

existing USB flash drive

file and overwrite it with

the new data.

• Use a different USB flash

drive.

Media Full

There is not enough space

available on the USB flash

drive.

Delete some of the files on

the USB flash drive to

make room for new data

(page EN-42) or use a

different USB flash drive.

File Full

1. There are too many

files on the USB flash

drive.

1. Delete some of the files

on the USB flash drive

to make room for new

data.

2. There is a file named

TAKE99.WAV in the

“AUDIO” folder.

2. Delete the WAV file in

the “AUDIO” folder.

Not SMF01

You are attempting to play

back SMF Format 2 song

data.

This Digital Piano

supports playback of SMF

Format 0 or Format 1 only.

Size Over

The data on the USB flash

drive is too big to play.

This Digital Piano

supports playback of song

data files with a maximum

size of 65 kbytes.

Wrong Data

1. The USB flash drive

data is corrupted.

—

2. USB flash drive

contains data that is not

supported by this

Digital Piano.

AP460-ES-1A.indd 46 2014/07/04 17:13:03

USB Flash Drive

EN-45

English

Convert

There is not enough

Digital Piano memory

available to convert a song

recorder song to SMF data

and store it on the USB

flash drive.

Reduce the size of the song

data.

Example:

Delete any tracks that are

not required.

Format

1. The USB flash drive

format is not

compatible with this

Digital Piano.

1. Format the USB flash

drive on the Digital

Piano.

2. The USB flash drive is

corrupted.

2. Use a different USB

flash drive.

Media R/W

The USB flash drive is

corrupted.

Use a different USB flash

drive.

Lamps Error Type Cause Action

AP460-ES-1A.indd 47 2014/07/04 17:13:04

EN-46

Connecting to a Computer

You can connect the Digital Piano to a computer and

exchange MIDI data between them. You can send play

data from the Digital Piano to commercially available

music software running on your computer, or you can

send MIDI data from your computer to the Digital

Piano for playback.

The following shows the minimum computer system

requirements for sending and receiving MIDI data.

Check to make sure that your computer complies with

these requirements before connecting the Digital Piano

to it.

zOperating System

Windows® XP (SP2 or later)*1

Windows Vista® *2

Windows® 7*3

Windows® 8 *4

Windows® 8.1 *5

Mac OS® X (10.3.9, 10.4.11, 10.5.X, 10.6.X, 10.7.X, 10.8.X,

10.9.X)

zUSB port

IMPORTANT!

• Never connect to a computer that does not conform

to the above requirements. Doing so can cause

problems with your computer.

IMPORTANT!

• Make sure you follow the steps of the procedure

below exactly. Connecting incorrectly can make data

send and receive impossible.

Turn off the Digital Piano and then start up

your computer.

•Do not start up the music software on your computer

yet!

After starting up your computer, use a

commercially available USB cable to connect

it to the Digital Piano.

Turn on the Digital Piano.

•If this is the first time you are connecting the Digital

Piano to your computer, the driver software required

to send and receive data will be installed on your

computer automatically.

Start up commercially available music

software on your computer.

Configure the music software settings to

select one of the following as the MIDI device.

•For information about how to select the MIDI device,

see the user documentation that comes with the

music software you are using.

IMPORTANT!

• Be sure to turn on the Digital Piano first before

starting up your computer’s music software.

NOTE

•Once you are able to connect successfully, there is no

problem with leaving the USB cable connected when

you turn off your computer and/or Digital Piano.

•For detailed specifications and connections that

apply to MIDI data send and receive by this Digital

Piano, see the latest support information provided

by the website at the following URL.

http://world.casio.com/

Minimum Computer System

Requirements

*1: Windows XP Home Edition

Windows XP Professional (32-bit)

*2: Windows Vista (32-bit)

*3: Windows 7 (32-bit, 64-bit)

*4: Windows 8 (32-bit, 64-bit)

*5: Windows 8.1 (32-bit, 64-bit)

Connecting the Digital Piano

to Your Computer

CASIO USB-MIDI : For Windows Vista, Windows 7,

Windows 8, Windows 8.1,

Mac OS X

USB Audio Device: For Windows XP

Computer USB port

A connector

Digital Piano USB port

B connector

USB cable

(A-B type)

AP460-ES-1A.indd 48 2014/07/04 17:13:04

English

Connecting to a Computer

EN-47

What is MIDI?

The letters MIDI stand for Musical Instrument Digital

Interface, which is the name of a worldwide standard

for digital signals and connectors that makes it possible

to exchange musical data between musical instruments

and computers (machines) produced by different

manufacturers.

NOTE

•For detailed information about MIDI

Implementation, visit the CASIO website at:

http://world.casio.com/.

See “Send channel” and “Local control” on page

EN-33.

Use the procedures in this section to transfer Recorder

memory data to a computer for storage, and to load

songs to user song memory (Music Library 61 to 70).

IMPORTANT!

• Turning off the Digital Piano while data is being

saved or loaded can cause all data currently stored

in Digital Piano memory (recorded songs, etc.) to be

deleted. Take care so power is not turned off

accidentally during data save and load operations. If

data is deleted, it will take longer than normal for the

Digital Piano to power up the next time you turn it on

(page EN-6).

Perform steps 1 through 3 of the procedure

under “Connecting the Digital Piano to Your

Computer” on page EN-46.

Change the Digital Piano’s USB device mode

to storage.

•While holding down the FUNCTION button, press

the keyboard key that corresponds to the USB device

mode.

•After this setting is changed, the GRAND PIANO

(CONCERT, MODERN) and ELEC. PIANO 1 button

lamps flash, and all other lamps are unlit.

•See “USB device mode” on page EN-33 for more

information.

On your computer, perform the required

operation to display your computer’s storage

devices.

•The memory of this Digital Piano will appear as

“PIANO” under “Devices with Removable Storage”.

Using MIDI

Transferring Song Data with a

Computer

If your computer is

running this operating

system:

Do this:

Windows XP Double-click “My Computer”.

Windows Vista,

Windows 7

Double-click “Computer”.

Windows 8 Open any folder. On the

navigation window, click

“Computer”.

Windows 8.1 Open any folder. On the

navigation window, click

“PC”.

Mac OS Skip step 3 and double-click

“PIANO” on your Mac

desktop.

AP460-ES-1A.indd 49 2014/07/04 17:13:04

EN-48

Connecting to a Computer

Double-click “PIANO”.

•“PIANO” contains folders named “MUSICLIB” and

“RECORDER”.

•To transfer a user song to the Digital Piano from your

computer, open the “MUSICLIB” folder and put the

song into one of the numbered subfolders (61

through 70). Each subfolder corresponds to a Music

Library number: Subfolder 61 to Music Library 61,

and so on.

•For example, storing song data in sub-folder 61 will

cause it to be treated as Music Library song 61 data by

the Digital Piano.

•To store Recorder song (.CSR) data on a computer,

copy the .CSR file in the RECORDER folder to the

computer. To return saved song (.CSR) data to Digital

Piano memory, copy it to the RECORDER folder.

*Before starting a store or load operation, first check

the file name extension to ensure it matches the ones

shown in this column.

In the case of a song recorded with the Digital

Piano’s recorder function, change its file name to one

of the names and extensions shown in this column.

IMPORTANT!

• The initial default configuration for Windows XP,

Windows Vista, Windows 7, Windows 8, and

Windows 8.1 is to hide file name extensions.

Perform one of the following operations on your

computer to show file name extensions.

•To show file name extensions under Windows XP

•To show file name extensions under Windows Vista

or Windows 7

•To show file name extensions under Windows 8 or

Windows 8.1

■To load a song into user song memory

(Music Library 61 to 70)

Data Type Folder

Name File Name and Extension*

User songs MUSICLIB .MID: SMF format data

(format 0/1)

.CM2: CASIO original

format data

Recorder

memory data

RECORDER BIDREC01.CSR: CASIO

original format data

\RECORDER

\MUSICLIB

\70

\62

\61

\PIANO

.MID files or .CM2 files

.CSR file (only one song data)

Digital Piano memory

1. Open the folder you want.

2. On the [Tools] menu, click [Folder Options].

3. Click the [View] tab. In the [Advanced settings] list,

clear the check box next to [Hide extensions for

known file types].

4. Click [OK].

1. Open Folder Options by clicking the [Start] button,

clicking [Control Panel], clicking [Appearance and

Personalization], and then clicking [Folder Options].

2. Click the [View] tab. Under [Advanced settings]

clear the [Hide extensions for known file types]

check box.

3. Click [OK].

1. Open any folder.

2. Click the [View] menu and then select the [File name

extensions] check box in the [Show/hide] group.

1. Open the MUSICLIB folder.

2. Copy the song file (.MID or .CM2) to the number-

named subfolder (61 to 70) whose name matches the

number of the Music Library location to which you

want to load the song.

•If there are two files with the filename extensions

.MID and .CM2 in the MUSICLIB folder, only the

.MID data will be loaded into user song memory.

AP460-ES-1A.indd 50 2014/07/04 17:13:04

English

Connecting to a Computer

EN-49

■To transfer Recorder memory data between

the Digital Piano and your computer

To transfer the Digital Piano’s current Recorder

memory data to your computer, copy the contents of

the RECORDER folder to your computer.

To return Recorder data you previously saved to your

computer back to Recorder memory, copy it back to the

RECORDER folder (and replace the current

RECORDER folder contents).

After the file copy operation is complete,

return the USB device mode to MIDI.

•If you are using a Macintosh, perform the eject

operation (drag them to the trash can).

•While holding down the FUNCTION button, press

the applicable keyboard key. See “USB device mode”

on page EN-33 for more information.

•Returning the USB device mode to MIDI will load the

contents of MUSICLIB into user song memory and

the contents of RECORDER into Recorder memory.

IMPORTANT!

• A data conversion error is indicated when both of the

START/STOP a button lamps, and the GRAND

PIANO (CONCERT, MODERN) and ELEC. PIANO

1 button lamps are all lit, and all other lamps are

unlit.

Copyrights

The rights of creators and copyright holders of music,

images, computer programs, databases, and other

data are protected by copyright laws. You are allowed

to reproduce such works for personal or non-

commercial use only. For any other purpose, all

reproduction (including data format conversion),

modification, transfer of reproductions, distribution

over a network, or any other use without permission

of the copyright holder exposes you to claims for

damages and criminal prosecution for copyright

infringement and violation of the author’s personal

rights. Be sure to reproduce and otherwise use

copyrighted works only in accordance with applicable

AP460-ES-1A.indd 51 2014/07/04 17:13:04

EN-50

Getting Ready

Before assembling the stand, first take a few moments

to check that all of the items shown below are present.

•This stand does not include any of the tools required

for assembly. It is up to you to prepare a large

Philips head (+) screwdriver for assembly.

IMPORTANT!

• Do not use any screws other than those that come

with the stand. Doing so risks damage to the stand

and/or Digital Piano.

• You can find the screws in a plastic bag inside of the

packing material.

• If anything is missing or damaged, contact your local

CASIO service provider.

CAUTION

•Assembly of the stand should be performed by at

least two people working together.

•This stand should be assembled on a flat surface.

•Do not remove the tape securing the keyboard cover

in place until assembly is complete. Removing the

tape can cause the keyboard cover to open and close

during assembly, creating the risk of personal injury

to your hands and fingers.

•Take care that you do not pinch your fingers

between parts when assembling them.

•Be sure to insert felt or other material between the

rubber feet and flooring. Do not allow direct contact

between them. Some types of flooring material may

become discolored or damaged by direct contact

with the rubber feet.

Unfasten the band 1 that bundles the pedal

cable to the back of crosspiece D and pull the

pedal cord out from the crosspiece.

Attach side panels A and B to crosspiece D.

Secure the side panels using four screws E.

•When installing parts 2, slide the brackets 3 into the

slots in either end of crosspiece D. If the brackets 3

are not inserted into the ends of the crosspiece D as

far as they will go, the screws E will not be able to

enter into the screw holes of the brackets 3, which

can strip the threads of the screws.

•Cover the screw heads with the caps I.

Assembling the Stand

Part Qty

Pedal cable

AP460-ES-1A.indd 52 2014/07/04 17:13:05

English

Getting Ready

EN-51

Slide back panel C into the grooves 4 of the

side panels.

IMPORTANT!

• Make sure that the back panel C is positioned

correctly as described below when installing it.

– Before sliding back panel C into place, make sure

that the widely spaced screw holes along the

bottom of the panel are on the left (when viewed

from the front of the stand), and the narrowly

spaced holes are on the right.

Use the two screws H to secure the top left

and right edges of the back panel C to the

brackets 5 of side panels A and B.

•At location 6, slip the clip G onto to the screw H

before installing the screw.

Next, secure the bottom of the back panel C

with the six F screws.

Adjust the height adjustment screw 7 to

provide support so crosspiece D does not

bow downwards when the pedals are

pressed.

IMPORTANT!

• Pressing the pedals without adjusting height

adjustment screw 7 can result in damage to

crosspiece D. Always make sure you adjust height

adjustment screw 7 before operating the pedals.

Wide

Narrow

AP460-ES-1A.indd 53 2014/07/04 17:13:05

EN-52

Getting Ready

Place the piano onto the stand.

IMPORTANT!

• In order to ensure you do not get your fingers

pinched between the piano and the stand, grasp the

piano on its sides (not its ends) at the locations

marked with stars () in the illustration.

First, use the two screws J to secure the

back of the piano to the stand. Next, use the

two screws J to secure the front of the piano.

IMPORTANT!

• The screws J keep the piano from slipping off the

stand. Never use the piano without the screws J

installed.

Affix the adaptor cord clip M next to the

power terminal (DC 24V).

Insert the plug of the AC adaptor that comes

with the Digital Piano into its power terminal

(DC 24V).

•At this time the screws on the bottom of the piano 8

should hook into the cutouts in the stand brackets 9.

At least 10cm

Bracket cutout

Back of piano

Stand side panel

To connect the cables

DC 24V terminal

Clip M

AC adaptor plug

Supplied AC adaptor

AP460-ES-1A.indd 54 2014/07/04 17:13:05

English

Getting Ready

EN-53

*Using the Clip M

zTo fasten the clip

As shown in the illustration, press down on (a) to force

the tip of the clip into the slot. Press down until you

hear the clip click securely into place.

zTo release the clip

As shown in the illustration, press (b) in the direction

indicated by the arrow.

Orienting the pedal plug as shown in the

illustration, plug it into the pedal connector on

the bottom of the piano.

•Secure the pedal cord with the clip G.

Plug the power cord of the AC adaptor that

comes with the Digital Piano into a household

power outlet as shown in the illustration

below.

Install the music stand by inserting its pegs

into the holes in the top of the piano.

Install the headphones hook.

¨á©

Slot

Tip

¨â©

Pedal plug

Household power outlet

AC adaptor

Power cord

To install the music stand and

headphones hook

2-1. Insert the headphones hook K into the two

holes on the bottom of the piano.

2-2. Use screw L to secure the headphones hook

in place.

2-2

2-1

AP460-ES-1A.indd 55 2014/07/04 17:13:05

EN-54

Getting Ready

IMPORTANT!

• Use both hands whenever opening or closing the lid,

and take care that you do not close it on your fingers.

• Do not open the lid too wide. Doing so creates the

risk of damage to the cover and digital piano.

• Stand in front of the digital piano on the right side

when opening or closing the lid.

To open the lid

Lift up the lid as shown in the illustration.

•The lid has a support bracket (indicated by the star 

in the illustration) attached to its inside surface.

Check to make sure that the support bracket is

standing up fully.

To close the lid

Carefully lift up slightly on the lid.

Use the fingers of your left hand to press

back on the support bracket () as you

slowly and carefully lower the lid.

•The support bracket is designed to prevent sudden

closing of the lid. Should the support bracket stop

moving, once again press back on it () as you slowly

and carefully lower the lid.

Protective tape is affixed to the front edges of the

keyboard keys to protect them during shipment.

Remove the protective tape before using the Digital

Piano.

Opening and Closing the

Piano Lid

Removing the Protective Tape

from the Keyboard

AP460-ES-1A.indd 56 2014/07/04 17:13:06

English

Getting Ready

EN-55

Your Digital Piano runs on standard household power.

Be sure to turn off power whenever you are not using

the Digital Piano.

Using an AC Adaptor

Use only the AC adaptor (JEITA Standard, with unified

polarity plug) that comes with this Digital Piano. Use

of a different type of AC adaptor can cause

malfunction of the Digital Piano.

Specified AC Adaptor: AD-E24250LW

•Use the supplied power cord to connect the AC

adaptor.

■About the AC adaptor that comes with the

Digital Piano

Note the following important precautions to avoid

damage to the AC adaptor and power cord.

•Never pull on the cord with excessive force.

•Never repeatedly pull on the cord.

•Never twist the cord at the base of the plug or

connector.

•Before moving the Digital Piano, be sure to unplug

the AC adaptor from the power outlet.

•Loop and bundle the power cord, but never wind it

around the AC adaptor.

IMPORTANT!

• Never connect the AC adaptor that comes with this

Digital Piano to any other device besides this Digital

Piano. Doing so creates the risk of malfunction.

• Make sure the Digital Piano is turned off before

plugging in or unplugging the AC adaptor.

• The AC adaptor will become warm to the touch after

very long use. This is normal and does not indicate

malfunction.

• Use the AC adaptor so its label surface is pointed

downwards. The AC adaptor becomes prone to

emitting electromagnetic waves when the label

surface is facing upwards.

Connect commercially available headphones to the

PHONES jacks. Connecting headphones to either of

the PHONES jack cuts off output to the speakers,

which means you can practice even late at night

without bothering others. To protect your hearing,

make sure that you do not set the volume level too high

when using headphones.

NOTE

•Be sure to push the headphones plug into the

PHONES jacks as far as it will go. If you don’t, you

may hear sound from only one side of the

headphones.

•If the plug of the headphones you are using does not

match the PHONES jacks, use the applicable

commercially available adaptor plug.

•If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor

plugged in when you unplug the headphones. If you

do, nothing will sound from the speakers when you

play.

Power Outlet Connecting Headphones

PHONES jacks

Front

Stereo standard plug

AP460-ES-1A.indd 57 2014/07/04 17:13:06

EN-56

Getting Ready

You can connect audio equipment or a music amplifier

to the Digital Piano and then play through external

speakers for more powerful volume and better sound

quality.

IMPORTANT!

• The Digital Piano automatically adjusts sound output

to optimize for headphone output (when headphones

are connected) or built-in speaker output (when

headphones are not connected). This also will cause

a change in the output quality from the Digital

Piano’s LINE OUT R and L/MONO jacks.

• Whenever connecting a device to the Digital Piano,

first use the VOLUME controller to set the volume to

a low level. After connecting, you can adjust the

volume to the level you want.

• Whenever you connect any device to the Digital

Piano, be sure to read the user documentation that

comes with the device.

Connecting to Audio Equipment 1

Use commercially available cables to connect the

external audio equipment to the Digital Piano’s LINE

OUT jacks as shown in Figure 1. LINE OUT R jack

output is right channel sound, while LINE OUT L/

MONO jack output is left channel sound. It is up to

you to purchase connecting cables like the ones shown

in the illustration for connection of audio equipment.

Normally in this configuration you must set the audio

equipment’s input selector to the setting that specifies

the terminal (such as AUX IN) to which the piano is

connected. Use the Digital Piano’s VOLUME controller

to adjust the volume level.

Connecting to a Musical Instrument

Amplifier 2

Use commercially available cables to connect the

amplifier to the Digital Piano’s LINE OUT jacks as

shown in Figure 2. LINE OUT R jack output is right

channel sound, while LINE OUT L/MONO jack

output is left channel sound. Connecting to the LINE

OUT L/MONO jack only outputs a mixture of both

channels. It is up to you to purchase connecting cable

like the one shown in the illustration for connection of

the amplifier. Use the Digital Piano’s VOLUME

controller to adjust the volume level.

IMPORTANT!

• When using the LINE OUT jacks, also connect

headphones to the PHONES jack. This will switch

the LINE OUT output to appropriate sound quality.

Use only accessories that are specified for use with this

Digital Piano.

Use of unauthorized accessories creates the risk of fire,

electric shock, and personal injury.

NOTE

•You can get information about accessories that are

sold separately for this product from the CASIO

catalog available from your retailer, and from the

CASIO website at the following URL.

http://world.casio.com/

Connecting Audio Equipment

or an Amplifier

INPUT 1

INPUT 2

Guitar amplifier

Keyboard amplifier, etc.

Standard plug

To either of the Digital Piano’s LINE OUT jacks

RIGHT (Red)

LEFT (White)

Audio amplifier AUX IN jack, etc.

Pin plug

Bundled and Optional

Accessories

AP460-ES-1A.indd 58 2014/07/04 17:13:06

EN-57

English

Reference

Troubleshooting

Problem Cause Action See

Page

No sound is produced when

I press a keyboard key.

1. The VOLUME controller is set to

“MIN”.

1. Rotate the VOLUME controller more

towards “MAX”.

) EN-7

2. Headphones or an adaptor plug is

plugged into one of the PHONES

jacks.

2. Disconnect whatever is connected to the

PHONES jacks.

) EN-55

3. MIDI Local control is turned off. 3. Turn on the Local control setting. ) EN-33

The pitch of the Digital

Piano is off.

1. The Digital Piano’s key setting is

something other than “440.0Hz”.

1. Change the key setting to “440.0Hz”, or

turn Digital Piano power off and then back

on again.

) EN-32

2. Digital Piano tuning is incorrect. 2. Adjust Digital Piano tuning, or turn the

Digital Piano off and then back on again.

) EN-32

3. Octave shift is enabled. 3. Change the octave shift setting to 0. ) EN-32

4. A non-standard temperament

setting is being used.

4. Change the temperament setting to

“0: Equal”, which is the standard modern

tuning.

) EN-32

Nothing happens when I

press a pedal.

1. The pedal unit cable is not

connected.

1. Connect the cable correctly. ) EN-52

2. The pedal unit cable plug is not

plugged in completely.

2. Make sure that the pedal unit cable plug is

inserted as far as it will go into the pedal

connector on the bottom of the Digital

Piano.

Tones and/or effects sound

strange. Turning power off

and then back on again

does not eliminate the

problem.

Example:

Note intensity does

not change even though I

alter key pressure.

The “Back up” feature is turned on. Turn off “Back up”. Next, turn power off and

then back on again.

) EN-33

I cannot transfer data after

connecting the Digital Piano

to a computer.

– 1. Check to make sure that the USB cable is

connected to the Digital Piano and

computer, and that the correct device is

selected with your computer’s music

software.

) EN-46

2. Turn off the Digital Piano and then exit the

music software on your computer. Next,

turn the Digital Piano back on and then

restart the music software on your

computer.

I cannot store data to a USB

flash drive or load data from

a USB flash drive.

– See “Error Indicators”. ) EN-44

It takes a long time before I

can use the Digital Piano

after I turn it on.

Digital Piano memory data was

corrupted because a data transfer

operation with a computer was in

progress the last time you turned off

the Digital Piano. When this

happens, the Digital Piano performs

a memory format operation the next

time you turn it on. You cannot

perform any other operation while a

format operation is in progress.

It takes about 20 seconds after you turn on

power to perform the memory format

operation. Wait until the format operation is

complete. Note that you should take care to

avoid turning off the Digital Piano while a data

transfer operation with a computer is in

progress.

) EN-47

AP460-ES-1A.indd 59 2014/07/04 17:13:06

EN-58

Reference

A tone’s quality and volume

sounds slightly different

depending where it is

played on the keyboard.

This is an unavoidable result of the digital sampling process,* and does not indicate

malfunction.

*Multiple digital samples are taken for the low range, middle range, and high range of the

original musical instrument. Because of this, there may be very slight differences in tonal

quality and volume between sample ranges.

When I press a button, the

note that is sounding cuts

out momentarily or there is

a slight change in how

effects are applied.

This happens when the sounds of multiple parts are sounding at the same time while using

layer, using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when

one of these conditions exists will cause the effect setting that is built into the tone to change

automatically, which causes notes to cut out momentarily or causes a slight change in how

effects are being applied.

There are knots, saw blade

marks, and/or other marks

on the finish of the Digital

Piano.

The finish of the Digital Piano has been designed to faithfully reproduce the appearance of

natural wood, including cuts and other marks in the wood. Though knots, saw blade marks,

and/or other marks may be visible on the finish, they are not actual cracks or scratches. Such

marks will not cause any problems with the use of your Digital Piano.

Problem Cause Action See

Page

AP460-ES-1A.indd 60 2014/07/04 17:13:06

Reference

EN-59

English

•Specifications and designs are subject to change without notice.

Product Specifications

Model AP-460BK/AP-460BN/AP-460WE

Keyboard 88-key piano keyboard, with Touch Response

Maximum Polyphony 256 notes

Tones 18

• Layer (excluding bass tone)

• Split (Low-range bass tone only)

Effects Brilliance (–3 to 0 to 3), Hall simulator (4 types), Chorus (4 types), DSP,

Damper Resonance (Damper noise enable/disable), Hammer response, String resonance, Lid simulator,

Key Off Simulator

Metronome • Beats: 0 to 9

• Tempo Range: 20 to 255

Duet Adjustable tone range (–1 to 2 octaves)

Concert Play • Number of Songs: 10

• Song volume: Adjustable

• Part On/Off: L, R (in the Lesson Mode only)

• 3 Modes: LISTEN, LESSON, PLAY

Music Library • Number of Songs: 60, User Songs: 10 (Up to approximately 90KB per song, approximately 900KB for 10

songs)*

*Based on 1KB = 1024 bytes, 1MB = 10242 bytes

• Song volume: Adjustable

• Part On/Off: L, R

Song Recorder • Functions: Real-time recording, playback

• Number of Song: 1

• Number of Tracks: 2

• Capacity: Approximately 5,000 notes total

• Recorded Data Protection: Built-in flash memory

Audio Recorder • Real-time recording and playback to USB flash drive*

*Linear PCM, 16bit, 44.1 kHz, stereo .WAV format

• Songs: 99 files

• Approximately 25 minutes maximum recording per file.

• Audio Recorder Volume Level: Adjustable

Pedals Damper (with half-pedal operation), Soft, Sostenuto

Other Functions • Touch Select: 3 types, Off

• Transpose: 2 octaves (–12 to 0 to 12)

• Tuning: 415.5Hz to 440.0Hz to 465.9Hz (variable)

• Temperament

• Octave shift

• Operation Lock

MIDI 16-channel multi-timbre receive

USB Flash Drive • Capacity: 32GB or less recommended

• Supported Functions: SMF playback, data storage, data loading, USB flash drive format, delete data,

play back of audio data

Inputs/Outputs • PHONES jacks: Stereo standard jacks × 2

• Power: 24V DC

•LINE OUT R, L/MONO jacks: Standard jacks × 2

Output impedance: 2.3KΩ

Output voltage: 1.8V (RMS) MAX

• USB port : Type B

• USB flash drive port : Type A

• Pedal connector

Speakers

12cm × 2 +

5cm × 2 (Output 20W + 20W)

Power Requirements AC Adaptor: AD-E24250LW

• Auto Power Off: Approximately 4 hours after last operation. Auto Power Off can be disabled.

Power Consumption 24V = 20W

Dimensions Digital Piano and Stand: 137.7 (W) × 42.7 (D) × 84.0 (H) cm (54 1/4 × 16 × 33 1/8 inch)

Weight Digital Piano and Stand: approximately 40.5kg (89.4 lbs)

AP460-ES-1A.indd 61 2014/07/04 17:13:07

EN-60

Reference

Be sure to read and observe the following operating

precautions.

■Location

Avoid the following locations for this product.

•Areas exposed to direct sunlight and high humidity

•Areas subjected to temperature extremes

•Near a radio, TV, video deck, or tuner

The above devices will not cause malfunction of the

product, but the product can cause interference in

the audio or video of a nearby device.

■User Maintenance

•Never use benzine, alcohol, thinner, or other

chemical agents to clean the product.

•To clean the product or its keyboard, wipe with a

soft cloth moistened in a weak solution of water and

a mild neutral detergent. Wring all excess moisture

from the cloth before wiping.

■Included and Optional Accessories

Use only accessories that are specified for use with this

product. Use of unauthorized accessories creates the

risk of fire, electric shock, and personal injury.

■Digital Piano Finish

The finish of the Digital Piano has been designed to

faithfully reproduce the appearance of natural wood,

including cuts and other marks in the wood. Though

knots, saw blade marks, and/or other marks may be

visible on the finish, they are not actual cracks or

scratches. Such marks will not cause any problems

with the use of your Digital Piano.

■Weld Lines

Lines may be visible on the exterior of the product.

These are “weld lines” that result from the plastic

molding process. They are not cracks or scratches.

■Musical Instrument Etiquette

Always be aware of others around you whenever using

this product. Be especially careful when playing late at

night to keep the volume at levels that do not disturb

others. Other steps you can take when playing late at

night are closing the window and using headphones.

•Any reproduction of the contents of this manual,

either in part or its entirety, is prohibited. Except for

your own, personal use, any other use of the

contents of this manual without the consent of

CASIO is prohibited under copyright laws.

•IN NO EVENT SHALL CASIO BE LIABLE FOR

ANY DAMAGES WHATSOEVER (INCLUDING,

WITHOUT LIMITATION, DAMAGES FOR LOSS

OF PROFITS, BUSINESS INTERRUPTION, LOSS

OF INFORMATION) ARISING OUT OF THE USE

OF OR INABILITY TO USE THIS MANUAL OR

PRODUCT, EVEN IF CASIO HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

•The contents of this manual are subject to change

without notice.

■AC Adaptor Handling Precautions

•Use a power outlet that is easily accessible so you

can unplug the AC adaptor when a malfunction

occurs or whenever else you need to do so.

•The AC adaptor is intended for indoor use only. Do

not use it where it might be exposed to splashing or

moisture. Do not place any container, such as a

flower vase, that contains liquid on the AC adaptor.

•Store the AC adaptor in a dry place.

•Use the AC adaptor in an open, well-ventilated area.

•Never cover the AC adaptor with newspaper, a table

cloth, a curtain, or any other similar item.

•Unplug the AC adaptor from the power outlet if you

do not plan to use the Digital Piano for a long time.

•Never try to repair the AC adaptor or modify it in

any way.

•AC adaptor operating environment

Temperature: 0 to 40°C

Humidity: 10% to 90% RH

•Output polarity:

Operating Precautions

AP460-ES-1A.indd 62 2014/07/04 17:13:07

Reference

EN-61

English

AC Adaptor Handling Precautions

Model: AD-E24250LW

1. Read these instructions.

2. Keep these instructions on hand.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this product near water.

6. Clean only with a dry cloth.

7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers).

8. Use only attachments and accessories specified by the manufacturer.

9. Refer all servicing to qualified service personnel. Servicing is required after any of the following occurs:

when the product is damaged, when the power supply cord or plug is damaged, when liquid is spilled into

the product, when a foreign object falls into the product, when the product is exposed to rain or moisture,

when the product does not operate normally, when the product is dropped.

10. Do not allow the product to be exposed to dripping or splashing liquid. Do not place any object containing

liquid on the product.

11. Do not allow the electrical load output to exceed the label rating.

12. Make sure the surrounding area is dry before plugging into a power source.

13. Make sure the product is oriented correctly.

14. Unplug the product during lightning storms or when you do not plan to use it for a long time.

15. Do not allow product ventilation openings to become blocked. Install the product in accordance with the

manufacturer’s instructions.

16. Take care the power cord is located where it will not be stepped upon or bent severely, particularly in

locations close to plugs and convenience receptacles, and in locations where it exits from the product.

17. The AC adaptor should be plugged into a power outlet as close to the product as possible to allow

immediate disconnection of the plug in case of emergency.

The symbol below is an alert indicating un-insulated hazardous voltage inside the product’s enclosure, which

may be sufficient to constitute the risk of electric shock to users.

’

The symbol below is an alert indicating the presence of important operating and maintenance (servicing)

instructions in the documentation that accompanies the product.

AP460-ES-1A.indd 63 2014/07/04 17:13:07

A-1

Appendix/Apéndice

Tone List/Lista de tonos

Tone Name/

Nombre de tonos Program Change/

Cambio de programa

Bank Select MSB/

MSB de selección de

banco

GRAND PIANO CONCERT 0 0

GRAND PIANO MODERN 0 1

GRAND PIANO CLASSIC 0 2

GRAND PIANO MELLOW

0 3

GRAND PIANO BRIGHT

ELEC.PIANO 1 4 0

ELEC.PIANO 2 4 1

FM E.PIANO 5 0

60’S E.PIANO 4 2

HARPSICHORD 6 0

VIBRAPHONE 11 0

STRINGS 1 49 0

STRINGS 2 48 0

PIPE ORGAN 19 0

JAZZ ORGAN 17 0

ELEC.ORGAN 1 16 0

ELEC.ORGAN 2 16 1

BASS (LOWER) 32 0

Concert Play List/

Lista de Interpretación de

concierto

Song No./

Núm. de canción

Song Name/Nombre de la canción

1 Je Te Veux

2Vltava (Má vlast)

3 Canon

4Tableaux d’Une Exposition “Promenade”

5 Piano Concerto No.20 K.466 2nd Mov.

6Polovetzian Dance (Prince Igor)

7 Sonate K.331 1st Mov.

8Violin Concerto 1st Mov.

9 Jesus, Bleibet Meine Freude

10 Melody In F

Music Library List/

Lista de la biblioteca musical

Song No./

Núm. de canción

Song Name/Nombre de canciones

1 Nocturne Op.9-2

2Fantaisie-Impromptu Op.66

3 Étude Op.10-3 “Chanson de l’adieu”

4Étude Op.10-5 “Black Keys”

5 Étude Op.10-12 “Revolutionary”

6Étude Op.25-9 “Butterflies”

7 Prélude Op.28-7

8Valse Op.64-1 “Petit Chien”

9 Valse Op.64-2

10 Moments Musicaux 3

11 Impromptu Op.90-2

12 Marche Militaire 1 (Duet)

13 Frühlingslied [Lieder Ohne Worte Heft 5]

14 Fröhlicher Landmann [Album für die Jugend]

15 Von fremden Ländern und Menschen [Kinderszenen]

16 Träumerei [Kinderszenen]

17 Tambourin

18 Menuet BWV Anh.114

[Clavierbüchlein der Anna Magdalena Bach]

19 Inventio 1 BWV 772

20 Inventio 8 BWV 779

21 Inventio 13 BWV 784

22 Praeludium 1 BWV 846 [Das Wohltemperierte Klavier 1]

23 Le Coucou

24 Gavotte

25 Sonatina Op.36-1 1st Mov.

26 Sonatine Op.20-1 1st Mov.

27 Sonate K.545 1st Mov.

28 Sonate K.331 3rd Mov. “Turkish March”

29 Rondo K.485

30 Für Elise

31 Marcia alla Turca

32 Sonate Op.13 “Pathétique” 1st Mov.

33 Sonate Op.13 “Pathétique” 2nd Mov.

34 Sonate Op.13 “Pathétique” 3rd Mov.

35 Sonate Op.27-2 “Moonlight” 1st Mov.

36 Rhapsodie 2

37 Waltz Op.39-15 (Duet)

38 Liebesträume 3

39 Blumenlied

40 La Prière d’une Vierge

41 Csikos Post

42 Humoresque Op.101-7

43 Melodie [Lyrische Stücke Heft 2]

44 Sicilienne Op.78

45 Berceuse [Dolly] (Duet)

46 Arabesque 1

47 La Fille aux Cheveux de Lin [Préludes]

48 Passepied [Suite bergamasque]

49 Gymnopédie 1

50 Je Te Veux

51 Salut d’Amour

52 The Entertainer

53 Maple Leaf Rag

54 L’arabesque [25 Etüden Op.100]

55 La Styrienne [25 Etüden Op.100]

56 Ave Maria [25 Etüden Op.100]

57 Le retour [25 Etüden Op.100]

58 La chevaleresque [25 Etüden Op.100]

59 No.13 [Études de Mécanisme Op.849]

60 No.26 [Études de Mécanisme Op.849]

Song No./

Núm. de canción

Song Name/Nombre de canciones

AP460-ES-1A.indd 126 2014/07/04 17:13:25

Function Transmitted Recognized Remarks

Basic

Channel

1 - 16

Default

Changed

Note

Number

0 - 127 0 - 127

0 - 127*1True voice

After

Touch

Control

Change

Pitch Bender

Key’s

Ch’s

Velocity

9nH v = 1 - 127

8nH v = 0 - 127

9nH v = 1 - 127

9nH v = 0,

8nH v = 0 - 127

Note ON

Note OFF

Mode

Mode 3

Default

Messages

Altered

0, 32

6, 38

Bank select

Modulation

Portamento Time

Data entry LSB, MSB*2

Volume

Pan

Expression

DSP Parameter0*2

DSP Parameter1*2

DSP Parameter2*2

DSP Parameter3*2

Damper

Portamento Switch

Sostenuto

Soft pedal

Model AP-460 Version : 1.0

*1 : Depends on tone

*1 : Depende del tono

MIDI Implementation Chart

AP460-ES-1A.indd 130 2014/07/04 17:13:25

Function Transmitted Recognized Remarks

Basic

Channel

1 - 16

Default

Changed

Note

Number

0 - 127 0 - 127

0 - 127*1True voice

Program

Change

0 - 127:True #

After

Touch

Control

Change

Pitch Bender

System Exclusive

Key’s

Ch’s

Velocity

9nH v = 1 - 127

8nH v = 0 - 127

9nH v = 1 - 127

9nH v = 0,

8nH v = 0 - 127

Note ON

Note OFF

Mode

Mode 3

Default

Messages

Altered

System

Common

: Song Pos

: Song Sel

: Tune

Aux

Messages

Remarks

: Local ON/OFF

: All notes OFF

: Active Sense

: Reset

System

Real Time

: Clock

: Commands

0, 32

6, 38

100, 101

120

121

Bank select

Modulation

Portamento Time

Data entry LSB, MSB*2

Volume

Pan

Expression

DSP Parameter0*2

DSP Parameter1*2

DSP Parameter2*2

DSP Parameter3*2

Damper

Portamento Switch

Sostenuto

Soft pedal

Vibrato rate

Vibrato depth

Vibrato delay

DSP Parameter4*2

DSP Parameter5*2

DSP Parameter6*2

DSP Parameter7*2

Portamento Control

High resolution velocity prefix*3

Reverb send*4

Chorus send

RPN LSB, MSB*2

All sound off

Reset all controller

Mode 1 : OMNI ON, POLY

Mode 3 : OMNI OFF, POLY

Mode 2 : OMNI ON, MONO

Mode 4 : OMNI OFF, MONO

O : Yes

X : No

Model AP-460 Version : 1.0

*2: For details, see MIDI Implementation at

http://world.casio.com/.

*3: Note on only

*4: This Instrument treats a hall simulator as a

reverb.

*2: Si desea más información, vea Implementación

MIDI en http://world.casio.com/.

*3: Sólo notas activas

*4: Este instrumento considera al simulador de salas

como una reverberación.

AP460-ES-1A.indd 2 2014/07/04 17:12:55

AP460-ES-1A

EN/ES

USER’S GUIDE

GUÍA DEL USUARIO

Please keep all information for future reference.

Guarde toda información para tener como referencia futura.

Safety Precautions

Before trying to use the piano, be sure to read

the separate “Safety Precautions”.

Precauciones de seguridad

Antes de intentar usar el piano, asegúrese de

leer las “Precauciones de seguridad” separadas.

EnglishEspañol

AP-460

This recycle mark indicates that the packaging conforms to

the environmental protection legislation in Germany.

Esta marca de reciclaje indica que el empaquetado se

ajusta a la legislación de protección ambiental en Alemania.

MA1407-A Printed in China

AP460-ES-1A.indd 1 2014/07/04 17:12:54

Casio Ap 460 Owners Manual AP460_EN

Web_AP460-ES-1A Web_AP460-ES-1A_EN AP-460 | Electronic Musical Instruments | Manuals | CASIO

Navigation menu

Versions of this User Manual:

Views

Navigation