Casio Cash Register Te 2400 Users Manual Dealer's
TE-2400 to the manual 333f6e2b-1bc9-4130-902c-baa30a677dcc
2015-01-21
: Casio Casio-Casio-Cash-Register-Te-2400-Users-Manual-242880 casio-casio-cash-register-te-2400-users-manual-242880 casio pdf
Open the PDF directly: View PDF 
.
Page Count: 240 [warning: Documents this large are best viewed by clicking the View PDF Link!]
Eu Di U.K.
CI Canada
ELECTRONIC CASH REGISTER
TE-2200
TE-2400
DEALER'S MANUAL
Version 1.0 August 2005
2
Introduction & Contents
This manual is intended to be used as a reference to the TE-2200 and TE-2400 system. It provides details to allow whole
understanding of the system capabilities, its operation, and how it can be used to solve many problems within the retail
outlet.
This manual consists of the following chapters:
1. Hardware configuration (for installation)
This chapter describes the hardware of these models and their network systems.
2. IPL (initial program loading)
This chapter describes how to download the application program to the terminal.
3. Initialization
This chapter describes how to set up the peripheral devices and the terminals.
4. Programming
This chapter explains actual programming procedure and functions.
5. Manager mode
6. X/Z report
7. Application system
8. Tips
9. Appendix:
Printing history
Manual version Software version
Version 1.0 : August 2005 Version 1.0.0
Revised points
TE-2200/2400 Dealer's Manual 3
System configuration ........................................................................................11
Hardware configuration .............................................................................................. 11
General configuration ...................................................................................................................... 11
Hardware diagram ...........................................................................................................................12
Display .............................................................................................................................................13
Input/output connectors ...................................................................................................................13
Online configuration.................................................................................................... 14
Peripheral ports and their connectable devices ...............................................................................14
IPL (Initial program loading)..............................................................................15
Memory map of the terminal....................................................................................... 15
System configuration and procedure ........................................................................ 15
Via COM1 port (to receive IPL data from PC).................................................................................. 15
Via CF card (to send the IPL data to CF card).................................................................................16
Via CF card (to send the IPL data to register) .................................................................................16
Initialization ........................................................................................................17
Machine initialization procedure ................................................................................ 17
Flag clear operation..................................................................................................... 19
Init 2 operation ............................................................................................................. 19
Entering diag mode ..................................................................................................... 20
Password ...................................................................................................................... 20
Programming (General explanation) ................................................................21
Program sub mode (P1 thru P7 mode) ...................................................................... 21
Entering the program sub mode ......................................................................................................21
File allocation (Program 5) ................................................................................23
File allocation program ............................................................................................... 23
Programming procedure ..................................................................................................................23
Issuing program reading report of program 5 mode................................................ 27
Issuing procedure ............................................................................................................................27
Report sample .................................................................................................................................27
Key allocation (Program 4)................................................................................29
Key allocation program ............................................................................................... 29
Programming procedure ..................................................................................................................29
Configuration of the physical key layout................................................................... 30
Issuing program reading report of program 4 mode................................................ 32
Issuing procedure ............................................................................................................................32
Report sample .................................................................................................................................32
Key function/machine feature (Program 3) ......................................................33
General control program............................................................................................. 33
Programming procedure ..................................................................................................................33
Program data (by address code) .....................................................................................................33
Address code 01 (date order/password)................................................................................................... 33
Address code 02 (password) .................................................................................................................... 33
Address code 03 (consecutive number) ................................................................................................... 33
Address code 04 (tax system, rounding, etc.) .......................................................................................... 34
Address code 05 (print control for receipt)................................................................................................ 35
Address code 06 (calculation & operation control) ................................................................................... 36
Address code 07 (menu & price shift)....................................................................................................... 37
Address code 08 (print control for fixed total report)................................................................................. 38
Address code 09 (print control for fixed total report)................................................................................. 39
Address code 10 (print control for taxable amount, till timer) ................................................................... 40
Address code 13 (online control) .............................................................................................................. 40
Address code 14 (currency exchange control) ......................................................................................... 41
Address code 15 (print control for reports) ............................................................................................... 42
Address code 16 (print control for grand total) ......................................................................................... 43
4
Introduction & Contents
Address code 17 (print control)................................................................................................................. 44
Address code 18 (print control for guest receipt and slip) ........................................................................ 45
Address code 19 (order control) ............................................................................................................... 45
Address code 21 (message control) ......................................................................................................... 46
Address code 25 (condiment etc.) ............................................................................................................ 47
Address code 26 (check tracking) ............................................................................................................ 47
Address code 27 (clerk control) ................................................................................................................ 47
Address code 28 (Euro) ............................................................................................................................ 48
Address code 29 (Euro) ............................................................................................................................ 48
Address code 30 (Internal thermal printer control) ................................................................................... 49
Address code 32 (direct maintenance PLU) ............................................................................................. 49
Address code 31 (scanning) ..................................................................................................................... 49
Address code 33 (batch PLU maintenance) ............................................................................................. 50
Address code 34 (backlight control) ......................................................................................................... 50
Address code 36 (store/recall/auto new check number)........................................................................... 51
Address code 37 (check number) ............................................................................................................. 51
Department key/flat-PLU key/PLU program (Batch feature programming)............ 52
Programming procedure ..................................................................................................................52
Program data ...................................................................................................................................52
Department key/flat-PLU key/PLU program (Individual feature programming) ..... 54
Programming procedure ..................................................................................................................54
Program data (by address code) .....................................................................................................54
Transaction key program ............................................................................................ 57
Programming procedure ..................................................................................................................57
Program data ...................................................................................................................................57
Clerk program .............................................................................................................. 80
Secret number, drawer, check number programming......................................................................80
Clerk detail link programming ..........................................................................................................80
Clerk other programming .................................................................................................................81
Other programs............................................................................................................ 83
Time range programming ................................................................................................................83
Table range programming................................................................................................................83
Tax table programming ....................................................................................................................84
Set menu programming ...................................................................................................................89
Batch X/Z report programming ........................................................................................................89
Arrangement programming ..............................................................................................................90
Check print control programming..................................................................................................... 90
Mix & match programming ...............................................................................................................91
Employee number programming .....................................................................................................92
Scheduler programming ..................................................................................................................93
Bottle link table programming ..........................................................................................................95
I/O parameter table programming....................................................................................................96
Printer connection table programming .............................................................................................97
Non PLU table programming ...........................................................................................................98
Scanning PLU maintenance programming ............................................................... 99
Batch maintenance PLU programming ............................................................................................99
Activation of batch maintenance PLU ..............................................................................................99
Scanning PLU direct maintenance programming ..........................................................................100
Scanning PLU individual programming..........................................................................................101
One touch NLU programming ........................................................................................................103
Issuing program reading report of program 3 mode.............................................. 104
Issuing procedure ..........................................................................................................................104
Report sample ...............................................................................................................................104
Character (Program 2) .....................................................................................105
Programming descriptors ......................................................................................... 105
Programming procedure ................................................................................................................105
Programming data .........................................................................................................................105
TE-2200/2400 Dealer's Manual 5
Programming item/key descriptors.......................................................................... 114
Programming procedure ................................................................................................................ 114
Programming data ......................................................................................................................... 114
Programming item/clerk descriptors by range ....................................................... 116
Programming procedure ................................................................................................................ 116
Program data ................................................................................................................................. 116
Entering characters ................................................................................................... 117
By character keyboard ................................................................................................................... 117
By character code .......................................................................................................................... 119
Character code list ......................................................................................................................... 119
Editing characters ..................................................................................................... 120
Correcting a character just entered ...............................................................................................120
Correcting and adding a PLU descriptor already set .....................................................................120
Correcting a key descriptor already set .........................................................................................120
Correcting a message descriptor already set ................................................................................120
Issuing program reading report of program 2 mode.............................................. 121
Issuing procedure ..........................................................................................................................121
Report sample ...............................................................................................................................121
Unit price/rate (Program 1) ..............................................................................123
Date/time setting........................................................................................................ 123
Date setting....................................................................................................................................123
Time setting ...................................................................................................................................123
Unit price program..................................................................................................... 123
Programming procedure ................................................................................................................123
Rate program ............................................................................................................. 125
<Currency exchange> ...................................................................................................................125
<Check>, <New balance>, <Premium (%+)>, <Discount (%–)>, <Rate tax>................................ 125
Amount program........................................................................................................ 125
<Cash>, <Check>, <New balance>, <Plus (+)>, <Minus (–)>, <Coupon> .................................... 125
Scanning PLU direct maintenance programming ..........................................................................125
Issuing program reading report of program 1 mode.............................................. 126
Issuing procedure ..........................................................................................................................126
Report sample ...............................................................................................................................126
Program reading (Program 6) .........................................................................127
Issuing program reading report ............................................................................... 127
Issuing procedure ..........................................................................................................................127
Report code ...................................................................................................................................127
Report sample............................................................................................................ 128
Fixed totalizer ................................................................................................................................128
Transaction key .............................................................................................................................128
PLU ................................................................................................................................................129
Department ....................................................................................................................................130
Group .............................................................................................................................................130
Clerk ..............................................................................................................................................131
Hourly sales ...................................................................................................................................131
Scanning PLU ................................................................................................................................131
Table analysis ................................................................................................................................132
Grand total .....................................................................................................................................132
General control ..............................................................................................................................132
Special character ...........................................................................................................................132
Report header ................................................................................................................................133
Tax table ........................................................................................................................................133
Set menu table...............................................................................................................................133
Batch X/Z .......................................................................................................................................133
6
Introduction & Contents
Clerk detail link ..............................................................................................................................134
Receipt message ...........................................................................................................................134
Check endorsement.......................................................................................................................134
Slip/external printer message ........................................................................................................135
Arrangement table .........................................................................................................................135
Character recall .............................................................................................................................135
Non-PLU table ...............................................................................................................................135
Check print control ........................................................................................................................135
Mix & match ...................................................................................................................................136
Employee .......................................................................................................................................136
Scheduler.......................................................................................................................................136
Bottle link table ..............................................................................................................................136
One touch NLU ..............................................................................................................................137
Help message ................................................................................................................................137
Ter minal connection table ..............................................................................................................137
Printer connection table .................................................................................................................137
AT command..................................................................................................................................138
Online password ............................................................................................................................138
I/O parameter table ........................................................................................................................138
Miscellaneous message ................................................................................................................138
Printing guidance message ...........................................................................................................138
Error message ...............................................................................................................................139
Registration guidance message ....................................................................................................139
X/Z guidance message ..................................................................................................................139
Program guidance message ..........................................................................................................139
Auto-program & system utilities (Program 7)...............................................141
Auto-programming .................................................................................................... 141
Auto-programming functions.......................................................................................................... 141
Auto-programming operation .........................................................................................................144
Other utilities ..................................................................................................................................145
Manager operation ...........................................................................................149
Manager control mode (X1 mode)............................................................................ 149
Entering the manager control mode ..............................................................................................149
Assign drawers for each clerk........................................................................................................149
Stock quantity maintenance (PLU/flat PLU/scanning PLU)................................... 150
To add to the actual stock quantity of a PLU/flat PLU/scanning PLU ............................................150
To subtract from the actual stock quantity of a PLU/flat PLU/scanning PLU .................................150
To input the new stock quantity of a PLU/flat PLU .........................................................................151
Clerk assignment....................................................................................................... 151
To link clerk button/key to interrupt buffers ....................................................................................151
To link clerk secret numbers to interrupt buffers ............................................................................ 151
To link clerk numbers to clerk number keys ...................................................................................151
Programming for the Euro ........................................................................................ 152
Programming for the Australian GST ...................................................................... 154
Programming of items in the program 1 mode ....................................................... 154
To enter the program 1 mode ........................................................................................................154
To exit the program 1 mode ...........................................................................................................154
Read/reset report issuance .............................................................................155
Preparation for issuing report .................................................................................. 155
Money declaration .........................................................................................................................155
Password (X2/Z2 mode) ................................................................................................................155
Issuing read/reset report .......................................................................................... 155
Programmability .............................................................................................................................156
Issuing procedure ..........................................................................................................................156
TE-2200/2400 Dealer's Manual 7
Report sample ...............................................................................................................................160
Financial report ..............................................................................................................................160
Individual item/key report ...............................................................................................................160
Fixed total report ............................................................................................................................161
Transaction key report ...................................................................................................................162
PLU report .....................................................................................................................................163
PLU stock report ............................................................................................................................164
Department report..........................................................................................................................165
Group report ..................................................................................................................................166
Clerk report ....................................................................................................................................167
Hourly sales report.........................................................................................................................168
Monthly report ................................................................................................................................168
Table analysis report ......................................................................................................................169
Open check report .........................................................................................................................169
Scanning PLU report .....................................................................................................................170
Scanning PLU stock report ............................................................................................................172
Mix & match report.........................................................................................................................172
Time & attendance report ..............................................................................................................173
File reset ........................................................................................................................................173
Application systems ........................................................................................175
Scanning PLU ............................................................................................................ 175
System configuration of the scanning PLU system .......................................................................175
Setup .............................................................................................................................................175
Barcode system .............................................................................................................................175
PLU maintenance ..........................................................................................................................176
Scanning PLU registration .............................................................................................................177
Mix & match discount.....................................................................................................................179
Check tracking system.............................................................................................. 180
System configuration .....................................................................................................................180
Printing on the external printers .............................................................................. 181
System configuration of the external printer system ......................................................................181
Backup system ..............................................................................................................................181
Printing control options for order....................................................................................................182
Time and attendance ................................................................................................. 182
Tips ....................................................................................................................183
Future order ............................................................................................................... 183
Usage ............................................................................................................................................183
Preparation ....................................................................................................................................183
Eat-in/takeout ............................................................................................................. 183
Automatic execution of Euro switchover by arrangement and scheduler ........... 184
Appendix: Calculation method .......................................................................185
Fixed total file............................................................................................................. 185
Appendix: Font code tables ............................................................................187
Standard font set (default) ........................................................................................ 187
Multilingual + Euro (Windows code page 858) .............................................................................. 187
Special font set .......................................................................................................... 188
Slavic (Windows code page 852) ..................................................................................................188
Greek .............................................................................................................................................188
Cyrillic (Windows code page 866) .................................................................................................189
Baltic ..............................................................................................................................................189
Arabic.............................................................................................................................................190
8
Introduction & Contents
Appendix: Peripheral device configuration ...................................................191
UP-360......................................................................................................................... 191
SP-1300....................................................................................................................... 191
Quick scan 6000......................................................................................................... 192
Appendix: File record format ..........................................................................193
Fixed totalizer file ...................................................................................................... 193
Fixed totalizer (daily)......................................................................................................................193
Fixed totalizer (periodic/consolidation) ..........................................................................................193
Transaction key file ................................................................................................... 194
Transaction key (daily)...................................................................................................................194
Transaction key (periodic/consolidation) ....................................................................................... 194
PLU file ....................................................................................................................... 194
PLU (daily) .....................................................................................................................................194
PLU (periodic/consolidation) ..........................................................................................................194
Department file .......................................................................................................... 195
Department (daily) .........................................................................................................................195
Department (periodic/consolidation) ..............................................................................................195
Group file.................................................................................................................... 195
Group (daily) ..................................................................................................................................195
Group (periodic/consolidation) .......................................................................................................195
Clerk file......................................................................................................................196
Clerk (programming) ......................................................................................................................196
Clerk detail (daily, periodic/consolidation)......................................................................................196
Clerk detail link (program)..............................................................................................................196
Hourly sales file ......................................................................................................... 197
Hourly sales (daily) ........................................................................................................................197
Hourly sales (periodic/consolidation) ............................................................................................197
Monthly sales file....................................................................................................... 197
Monthly sales (daily, periodic/consolidation)..................................................................................197
Scanning PLU files .................................................................................................... 198
Scanning PLU file (daily) ...............................................................................................................198
Non PLU table file (program) .........................................................................................................198
Batch maintenance PLU file (program)..........................................................................................198
Direct maintenance PLU file (program) .........................................................................................198
One touch NLU table file................................................................................................................199
Mix & match table file ................................................................................................ 199
Mix & match table file (daily) ..........................................................................................................199
Mix & match table file (periodic/consolidation)...............................................................................199
Bottle link table file.................................................................................................... 199
Bottle link table file (program) ........................................................................................................199
Table analysis file ...................................................................................................... 200
Table analysis (daily) .....................................................................................................................200
Table analysis (periodic/consolidation) ..........................................................................................200
Time and attendance file........................................................................................... 200
Time and attendance (daily) .......................................................................................................... 200
Employee file .................................................................................................................................200
Grand total file ........................................................................................................... 201
Grand total (daily) ..........................................................................................................................201
Grand total (consolidation).............................................................................................................201
General control file .................................................................................................... 201
General control ..............................................................................................................................201
Special character file................................................................................................. 202
Special character ...........................................................................................................................202
TE-2200/2400 Dealer's Manual 9
Report header file ...................................................................................................... 202
Report header ................................................................................................................................202
Tax table file ............................................................................................................... 202
Tax table ........................................................................................................................................202
Set menu table file ..................................................................................................... 202
Set menu table...............................................................................................................................202
Batch X/Z file .............................................................................................................. 203
Batch X/Z .......................................................................................................................................203
Receipt message file ................................................................................................. 203
Receipt message ...........................................................................................................................203
Check endorsement message file ............................................................................ 203
Check endorsement message .......................................................................................................203
Slip/external printer message file ............................................................................ 203
Slip/external printer message ........................................................................................................203
Arrangement file ........................................................................................................ 204
Arrangement file ............................................................................................................................204
Character recall file ................................................................................................... 204
Character recall .............................................................................................................................204
Check print file........................................................................................................... 204
Check print.....................................................................................................................................204
Scheduler file ............................................................................................................. 204
Scheduler.......................................................................................................................................204
System files................................................................................................................ 205
Character key table file ..................................................................................................................205
Key table file ..................................................................................................................................206
Terminal connection table file ........................................................................................................207
Printer connection table .................................................................................................................207
Operation start date file .................................................................................................................207
Initialize code file ...........................................................................................................................207
AT command file ............................................................................................................................208
Online password file ......................................................................................................................208
I/O parameter table file ..................................................................................................................208
System error log file .......................................................................................................................208
Graphic image files.................................................................................................... 208
Graphic logo file .............................................................................................................................208
Graphic logo file (for external printer) ............................................................................................208
Watermark print file........................................................................................................................208
Guidance message files............................................................................................ 209
Error message file..........................................................................................................................209
Miscellaneous message file ...........................................................................................................213
Printing guidance message file ......................................................................................................214
X/Z guidance message file ............................................................................................................216
Program guidance message file ....................................................................................................218
Registration guidance message file ...............................................................................................221
Help message file ..........................................................................................................................222
Appendix: Compulsory....................................................................................227
Appendix: Error code.......................................................................................229
Index ..................................................................................................................233
10
Introduction & Contents
11
System configuration
TE-2200/2400 Dealer's Manual
System configuration
Hardware configuration
General configuration
1Operator display
2Customer display (Popup display)
3Stroke keyboard (TE-2200)
4Touch keyboard (TE-2400)
5CF card slot cover
6Printer cover
7Mode switch
8Connector cover (opposite side)
1
2
3
5
6
7
81
2
4
5
6
7
8
12
System configuration
Keyboard
Power
supply
Popup
disp.
i/f
Drawer
Scanner
HHS-15
Drawer
1
i/f
Drawer
2
i/f
RS-
232C
COM1
RS-
232C
COM2
Drawer
Slip
printer
SP-1300
MODEM
or
PC
CPU
RAM
Flash
Memory
Main Display
Note: Shadowed device and dot line indicate option devices.
PRT-CB-8A/-8B
PRT-CB-8C
PRL-CB-2
Power
supply
External
printer
UP-360
Power
supply
31AD-U/E
CF card
Journal printer
Receipt printer
Popup
display
Multi drawer kit MDL-12
Hardware diagram CF card
drawer
external printer
slip printer
multi drawer
scanner
HHS-15
UP-360
SP-1300
13
System configuration
TE-2200/2400 Dealer's Manual
Input/output connectors
Input /output connectors
COM ports are located in the leftside connector cover.
SCANNER PC/MODEM
COM2 COM1
Display
Contrast control (Except for U.S. model)
HELP
CONTRAST
LIGHT DARK
DATE/
TIME
RECEIPT
ON/OFF
14
System configuration
Steps to define COM port/peripheral devices
After connecting peripheral devices, programming of I/O parameter table, printer connection table are necessary.
Online configuration
Peripheral ports and their connectable devices
Available device/cable list
External printer: UP-360
Printer cable: PRT-CB-8A(3m) or PRT-CB-8B(5m)
Slip printer: SP-1300
Printer cable: PRT-CB-8C
Power supply: AD31U or AD31E
Scanner (Hand-held): HHS-15
Scanner (LASER): PSC Quick Scan 6000
Scanner (Fixed) PSC HS1250
MODEM: US Robotics 56K V.92 External Faxmodem/56K Faxmodem (U.S. only)
PC cable: PRL-CB-2
✔: can connect
Drawer COM port
Model Device port COM1 COM2
MODEM/PC ✔
✔✔
Slip printer ✔
Scanner ✔
Drawer 1 (Max 2)
External printer
(Max. 2 printers)
TE-2200
TE-2400
START
Connect Modem or PC?
Connect it to COM1 port.
Connect a scanner?
Connect it to COM2 port.
No
No
Yes
Yes
Connect a slip printer?
Connect it to free COM1 or COM2 port.
Connect external printer(s)?
Connect it (them) to free COM port(s).
END
No
No
Yes
Yes
15
IPL
TE-2200/2400 Dealer's Manual
IPL (Initial program loading)
IPL should be made before initializing when the application program has been modified.
Memory map of the terminal
The application programs are downloaded from PC (via COM port)/other terminal (via inline or COM port)/CF card to the
internal flash memory.
System configuration and procedure
Via COM1 port (to receive IPL data from PC)
Operation
1. Set the mode switch to OFF position.
2. While holding down the <JOURNAL FEED>, turn the mode switch to PGM position.
3. Release <JOURNAL FEED> after the register shows “INIT”.
4. Enter “44449999” and press <SUBTOTAL>.
5. Enter “0” (communication speed: 38400 bps) and press <SUBTOTAL>.
6. Start the IPL program of the PC.
CF card
backup data
program data
RAM
totalizer/counter,
work area
Flash memory
Application program
ROMbios, program loader
some diagnosis
Application program
5
IPL
COM1 port
PC
16
IPL (Initial Program Loading)
CF card
Never plug/unplug the CF card during IPL.
Via CF card (to send the IPL data to CF card)
Operation
1. Set the mode switch to OFF position.
2. Open the CF card slot cover and insert the CF card securely.
(Please check that the CF card is vacant. Refer to the “System utility section in PGM7”.)
3. Turn the mode switch to PGM position.
4. Enter “7” and press <SUBTOTAL>.
5. Enter “170” and press <SUBTOTAL>.
6. Enter “49” and press <CASH>.
(In case of quitting, press <SUBTOTAL> instead of <CASH>.)
7. Turn OFF the register and pull out the CF card.
Via CF card (to send the IPL data to register)
Operation
1. Set the mode switch to OFF position.
2. Open the CF card slot door and insert the CF card securely.
3. While holding down the <JOURNAL FEED>, turn the mode switch to PGM position.
4. Release <JOURNAL FEED> after the register shows “INIT”.
5. Enter “44449999” and press <SUBTOTAL>.
6. Enter “20” and press <SUBTOTAL>.
17
Initialization
TE-2200/2400 Dealer's Manual
Initialization
Machine initialization procedure
1. Plug the power cord into an AC outlet.
2. Hold down <JOURNAL FEED>.
3. Turn the mode switch to PGM position.
4. Release <JOURNAL FEED>.
You should see “0000000000” on the display.
If 10 zeros are not shown or another character are shown,
immediately set the mode switch to OFF and restart from
the beginning of this procedure.
5. Enter 11-digit program code from the worksheet.
6. Press <SUBTOTAL> to register the program code.
(Wait until beep twice.)
7. Press <SUBTOTAL> to register the program code.
D11D10D9D8 ~ D3D2D1 s
refer to Worksheet (Initialize)
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
RECEIPT JOURNAL
FEED FEED
RECEIPT
FEED
18
Initialization
Note:
Please check the receipt after initialization operation (machine initialization, flag clear operation and init2) that the machine
number is printed properly.
If error codes are printed on it, check the hardware and retry the operation.
Worksheet (Initialize)
* When you select this option “Use clerk secret code key”, and your register doesn’t have this key on the default keyboard,
be sure to allocate <CLERK-#> (clerk secret number key) just after the initialization.
(Do NOT turn to OFF before allocating this key.)
P
01 03-04-2004 11:58
C
01 MC#01 000001
INIT
(C) 2005 by CASIO
COMPUTER CO.,LTD.
All rights reserved.
TE-2200/2400 STD
VER. :nnnn
LABEL :nnnnnn
VER. :nnnn
LABEL :nnnnnn
INIT. :nnnnnnnnnnnnnn
0002-98 2000
:
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—INIT symbol
—Copyright
—Model name
—ROM version
—ROM label
—ROM version
—ROM label
—Initialization code
—I/O parameter table record No./error code
Description Choice Program code
Print password of PGM mode, when flag clear operation is performed.
Password in PGM3 ~ 7 mode
Messages and descriptors are written in
English = 0, French = 1, Spanish = 2, German = 4
Model for
U.S. or Canada (Date order: month/day/year) = 2,
Other area (~00, Date order: day/month/year) = 1,
Other area (0, Date order: day/month/year) = 3
Fixed value:
TE-2200: 25
TE-2400: 04
Use
1 clerk switch (clerk push switch)/
2 Clerk secret number key *
Initialization pattern:
1 For scanning/2 For check tracking
Use Euro only.
a
b
:
D11
Yes = 0
No = 4
Significant
numbers
Significant
number
Significant
number
Significant
numbers
1 = 0
2 = 1
1 = 0
2 = 2
No = 0
Yes = 1
::::
D10 D9D8D7
:
D6
:
D5
::
D4D3
:
(a+b)
D2
:
D1
19
Initialization
TE-2200/2400 Dealer's Manual
Flag clear operation
1. Plug the power cord into an AC outlet.
2. Hold down <RECEIPT FEED>.
3. Turn the mode switch to PGM position.
4. Release <RECEIPT FEED>.
You should see “FFFFFFFFFF” on the display.
If 10 Fs are not shown or another character are shown,
immediately set the mode switch to OFF and restart from
the beginning of this procedure.
5. Press <SUBTOTAL> to complete. After completion of flag clear, receipt is issued.
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
RECEIPT JOURNAL
FEED FEED
JOURNAL
FEED
Init 2 operation
After completion, receipt is issued.
1. Plug the power cord into an AC outlet.
2. Hold down <RECEIPT FEED>.
3. Turn the mode switch to PGM position.
4. Release <RECEIPT FEED>.
You should see “FFFFFFFFFF” on the display.
If 10 Fs are not shown or another character are shown,
immediately set the mode switch to OFF and restart from
the beginning of this procedure.
5. Enter “8888888888” and press <CHECK TEND> to complete.
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
RECEIPT JOURNAL
FEED FEED
JOURNAL
FEED
Note: After flag clear, clerk 1 is assigned automatically. So do not program clerk 1 as not assignable or
not operable in PGM mode.
20
Initialization
Entering diag mode
Password
During initialize operation, you can program the password for PGM 3 ~ 7. If it is set, every time you enter PGM 3 ~ 7
mode, you must input this password by the following procedure.
1. Press <#-1> (normally <CASH/AMT TEND>).
2. Enter password.
3. Press <#-2> (normally <SUBTOTAL>).
Otherwise, you can do nothing in the PGM 3 ~ 7 mode.
1. Plug the power cord into an AC outlet.
2. Hold down <JOURNAL FEED>.
3. Turn the mode switch to PGM position.
4. Release <JOURNAL FEED>.
5. Enter “99990000” and press <SUBTOTAL> to enter the diagnosis.
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
RECEIPT JOURNAL
FEED FEED
RECEIPT
FEED
21
Programming
TE-2200/2400 Dealer's Manual
Programming (General explanation)
Program sub mode (P1 thru P7 mode)
Program mode contains seven sub modes listed below. When you change the mode switch to PGM mode, the register is
always in the PGM 1 mode. In case of using other mode, enter the sub mode number (2 ~ 7) and press <SUBTOTAL>.
• PGM1: unit price, rate, date, time, scanning PLU unit price maintenance
•PGM2: descriptor, name, message
• PGM3: machine feature (general function, clerk, etc.), key feature (department, transaction), scanning PLU maintenance
•PGM4: key allocation
•PGM5: file allocation
•PGM6: program reading
•PGM7: auto-program, system utility
Entering the program sub mode
Procedure (for PGM 1, 2 mode)
1. Enter password for PGM 1, 2 mode. If the register has no password for the PGM1 and 2 mode, you need not to enter it.
2. Press <SUBTOTAL>. An error occurs if you try to enter the PGM1 or 2 mode without inputting a password (when one is
programmed), or if the password you input does not match the one programmed for the register.
To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this manual.
This password is defined by the address code 02 of the general function program.
Procedure (for PGM 3 ~ 7 mode)
1. Enter password for PGM 3 ~ 7 mode. If the register has no password for the PGM 3 ~ 7 mode, you need not to enter it.
2. Press <SUBTOTAL>. An error occurs if you try to enter the PGM 3 ~ 7 mode without inputting a password (when one is
programmed), or if the password you input does not match the one programmed for the register.
To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this manual.
This password is defined during initialization operation.
637s6a::::6s6
password (4-digit)
Mode switch
PGM PGM 3 ~ 7
661s6a
::::
6s6
62s6a
::::
6s6
password (4-digit)
password (4-digit)
Mode switch
PGM PGM1
PGM2
22
Programming (General explanation)
23
Program 5
TE-2200/2400 Dealer's Manual
File allocation (Program 5)
File allocation program
Programming procedure
File attribu- Consolidation file
tion code daily sales Periodic 1 Periodic 2 Daily sales Periodic 1 Periodic 2
0✔
1✔✔
2✔✔✔
3✔✔
4✔✔ ✔✔
5✔✔✔ ✔✔✔
65s6:::s6::a6s
File record number (see next pages.)
File number (see next pages.)
File attribution code (see below.)
PGM
Mode switch
24
File allocation programming (P5)
File number list
File Record Max No. Attribu- Allocat- Default
File description Description
No. length of records tion able Rec. No.
System files
088 Auto-program work 6 1 Work No 1
089 Consecutive number work 6 1 Work No 1
091 Terminal connection table 12 1 Program Yes 32
093 Printer connection table 5 7 Program Yes 3
094 Start date 4 1 Buffer No 1
095 Initialize code 7 1 Program No 1
096 AT command 62 2 Program Yes 2
097 Online password 8 1 Program Yes 1
098 I/O parameter table 4 2 Program No 4
099 System error log 11 99 Buffer Yes 99
Function and total files
001 Fixed totalizer 22 99 Pgm/Sale No 99
--- (periodic total 1) 10 99 Sales Yes 99
--- (periodic total 2) 10 99 Sales Yes 0
--- (daily consolidation) 10 99 Sales Yes 0
--- (periodic 1 consolidation) 10 99 Sales Yes 0
--- (periodic 2 consolidation) 10 99 Sales Yes 0
002 Transaction key 35 999 Pgm/Sale Yes 30
--- (periodic total 1) 10 999 Sales Yes 30
--- (periodic total 2) 10 999 Sales Yes 0
--- (daily consolidation) 10 999 Sales Yes 0
--- (periodic 1 consolidation) 10 999 Sales Yes 0
--- (periodic 2 consolidation) 10 999 Sales Yes 0
004 PLU 73 *A Pgm/Sale Yes 216
--- (periodic total 1) 30 *A Sales Yes 0
--- (periodic total 2) 30 *A Sales Yes 0
--- (daily consolidation) 30 *A Sales Yes 0
--- (periodic 1 consolidation) 30 *A Sales Yes 0
--- (periodic 2 consolidation) 30 *A Sales Yes 0
005 Department 59 99 Pgm/Sale Yes 30
--- (periodic total 1) 25 99 Sales Yes 30
--- (periodic total 2) 25 99 Sales Yes 0
--- (daily consolidation) 25 99 Sales Yes 0
--- (periodic 1 consolidation) 25 99 Sales Yes 0
--- (periodic 2 consolidation) 25 99 Sales Yes 0
006 Group 22 99 Pgm/Sale Yes 10
--- (periodic total 1) 10 99 Sales Yes 0
--- (periodic total 2) 10 99 Sales Yes 0
--- (daily consolidation) 10 99 Sales Yes 0
--- (periodic 1 consolidation) 10 99 Sales Yes 0
--- (periodic 2 consolidation) 10 99 Sales Yes 0
009 Hourly sales 24 99 Pgm/Sale Yes 24
--- (periodic total 1) 20 99 Sales Yes 0
--- (periodic total 2) 20 99 Sales Yes 0
--- (daily consolidation) 20 99 Sales Yes 0
--- (periodic 1 consolidation) 20 99 Sales Yes 0
--- (periodic 2 consolidation) 20 99 Sales Yes 0
*A: Depend on the model
25
Program 5
TE-2200/2400 Dealer's Manual
File Record Max No. Attribu- Allocat- Default
File description Description
No. length of records tion able Rec. No.
010 Monthly sales 20 31 Pgm/Sale Yes 31
--- (periodic total 1) 20 31 Sales Yes 0
--- (periodic total 2) 20 31 Sales Yes 0
--- (daily consolidation) 20 31 Sales Yes 0
--- (periodic 1 consolidation) 20 31 Sales Yes 0
--- (periodic 2 consolidation) 20 31 Sales Yes 0
018 Table analysis 28 99 Pgm/Sale Yes 0
--- (periodic total 1) 10 99 Sales Yes 0
--- (periodic total 2) 10 99 Sales Yes 0
--- (daily consolidation) 10 99 Sales Yes 0
--- (periodic 1 consolidation) 10 99 Sales Yes 0
--- (periodic 2 consolidation) 10 99 Sales Yes 0
020 Grand total 20 3 Pgm/Sale Yes 3
--- (daily consolidation) 8 3 Sales Yes 3
Check files
015 Check index 255 200 Buffer Yes (60)*B
056 Separate check buffer 100 1500 Buffer Yes (80)*B
060 Check detail 100 9999 Buffer Yes (900)*B
Clerk files
007 Clerk 38 99 Program Yes 15
030 Clerk detail link 9 200 Program Yes 10
011 Clerk detail 10 99 × 99 Sales Yes 150
--- (periodic total 1) 10 99 × 99 Sales Yes 150
--- (periodic total 2) 10 99 × 99 Sales Yes 0
--- (daily consolidation) 10 99 × 99 Sales Yes 0
--- (periodic 1 consolidation) 10 99 × 99 Sales Yes 0
--- (periodic 2 consolidation) 10 99 × 99 Sales Yes 0
Time and attendance files
019 Time and attendance 16 999 Sales Yes 0
061 Employee 17 99 Program Yes 10
Scanning PLU files
016 Scanning PLU 58 *A Pgm/Sale Yes (<-)*C
040 Non PLU table 8 100 Program Yes (10)*C
051 Mix & match table 30 99 Pgm/Sale Yes 0
--- (periodic total 1) 10 99 Sales Yes 0
--- (periodic total 2) 10 99 Sales Yes 0
--- (daily consolidation) 10 99 Sales Yes 0
--- (periodic 1 consolidation) 10 99 Sales Yes 0
--- (periodic 2 consolidation) 10 99 Sales Yes 0
070 Batch maintenance PLU 42 1000 Program Yes (100)*C
071 Direct maintenance PLU 42 1000 Program Yes (50)*C
076 Scanning PLU index 2 S-PLU + 2 Buffer Automatic (5002)*C
077 One touch NLU table 7 999 Program Yes (10)*C
Arrangement file
038 Arrangement table 11 9999 Program Yes 0
*A: Depend on the model.
*B: Allocate if you select “check tracking pattern” initialization, (refer to page 24 of this manual).
*C: Allocate if you select “scanning pattern” initialization, (refer to page 24 of this manual).
26
File allocation programming (P5)
File Record Max No. Attribu- Allocat- Default
File description Description
No. length of records tion able Rec. No.
Program / message / buffer files
022 General control 5 37 Program No 37
023 Special character 16 42 Program No 42
024 Report header 12 25 Program No 26
025 Tax table 74 10 Program Yes 4
028 Set menu table 60 999 Program Yes (10)*B
029 Batch X/Z 24 10 Program Yes 4
032 Receipt message 24 42 Program Yes 4
033 Check endorse message 40 4 Program Yes 0
034 Slip/external printer message 40 42 Program Yes 0
036 Registration buffer 100 1200 Buffer Yes 80
039 Character recall 40 999 Program Yes 10
041 Check print 3 9 Program Yes 0
046 Character key table 6 *E Program No *E
047 Graphic logo 48 168 Program Yes 168
049 Print buffer (for external printer) 50 600 Buffer Yes 0
062 Scheduler 22 99 Program Yes 0
065 Order character 12 99 Program Yes 0
067 Graphic logo (for external printer) 48 168 Program Yes 0
068 Watermark print 48 168 Program Yes 0
073 Bottle link table 4 999 Program Yes 0
074 Key table 24 *F Program No 150
078 Miscellaneous message 16 52 *D Program Yes 0
079 Printing guidance message 24 68 *D Program Yes 0
080 Error message 16 191 *D Program Yes 0
081 Registration guidance message 16 11 *D Program Yes 0
082 X/Z guidance message 16 38 *D Program Yes 0
083 Program guidance message 16 92 *D Program Yes 0
085 Help message 24 199 *D Program Yes 0
086 Slip print buffer 40 500 Buffer Yes 0
*A: Depend on the model.
*B: Allocate if you select “check tracking pattern” initialization, (refer to page 24 of this manual).
*C: Allocate if you select “scanning pattern” initialization, (refer to page 24 of this manual).
*D: Allocate these files if you want to change the default message.
*E: 67 for TE-2200, 77 for TE-2400Eu, 70 for TE-2400US.
*F: 84 for TE-2200, 112 for TE-2400.
27
Program 5
TE-2200/2400 Dealer's Manual
Issuing program reading report of program 5 mode
Issuing procedure
Report sample
P
05....................
FILE0001
22bytes 99 99 99
10bytes 99 99 99
FILE0002
35bytes 100 -- --
10bytes 100 -- --
RAM 20,234
—Program read symbol
—File name
—Sales file record length/No. of records of daily sales/periodic sales 1/periodic sales 2
—Consolidation file record length/No. of records of daily sales/periodic sales 1/periodic sales 2
—Hyphen means no record.
—Remaining RAM capacity
65s6s
PGM
Mode switch
28
File allocation programming (P5)
29
Program 4
TE-2200/2400 Dealer's Manual
Key allocation (Program 4)
Key allocation program
Programming procedure
By pressing the appropriate key
By entering physical key code
Menu sheet number
Menu sheet Description Description
number (for transaction key) (for Dept/flat-PLU)
0 or skip entering Set a function to the 1st ~ 6th menu sheets. Set a function to the programmed menu sheet.
1Set a function to the 1st menu sheet. Set a function to the 1st menu sheet.
2Set a function to the 2nd menu sheet. Set a function to the 2nd menu sheet.
3Set a function to the 3rd menu sheet. Set a function to the 3rd menu sheet.
4Set a function to the 4th menu sheet. Set a function to the 4th menu sheet.
5Set a function to the 5th menu sheet. Set a function to the 5th menu sheet.
6Set a function to the 6th menu sheet. Set a function to the 6th menu sheet.
64s6:000s6
6::6:::66s
64s6:6:::s6
6::6:::6a6s
PGM
Mode switch
PGM
Mode switch
See Menu sheet No. section
Menu sheet number
This step can be
skipped for
transaction key.
to other key
• Record No. (department/transaction)
• Random code or record No. (flat-PLU)
• Function code Appropriate key
(white key on the next page)
#-nn
This step can be
skipped for
transaction key.
to other key
• Record No. (department/transaction)
• Random code or record No. (flat-PLU)
• Function code
See Menu sheet No. section
Menu sheet number Physical key code
(see the next page.)
~
~
Set the same function
30
Key allocation programming (P4)
Configuration of the physical key layout
TE-2200
TE-2400 for Eu
TE-2400 for US
The shadowed key cannot be programmed with any other functions.
<00>, <000>, and <.> functions are only allocated to <#011> or <#012> keys.
071 064 062 060 054 048 042 036 030 024 018
081 076 070 065 063 061 059 053 047 041 035 029 023 017
080 075 069 058 052 046 040 034 028 022 015
079 074 068 057 051 045 039 033 027 014 016
078 073 067 056 050 044 038 032 026 020 021
077 072 066 011 012 055 049 043 037 031 025 019 013
C
789
456
123
0
RECEIPT
FEED
JOURNAL
FEED
038 045 052 059 066 073 080 087 094 101 108 031 029 026
037 044 051 058 065 072 079 086 093 100 107 030 028 025 023 019
036 043 050 057 064 071 078 085 092 099 106 027 024 022 018
035 042 049 056 063 070 077 084 091 098 105 021 017
034 041 048 055 062 069 076 083 090 097 104 020 015
033 040 047 054 061 068 075 082 089 096 103 014 016
032 039 046 053 060 067 074 081 088 095 102 011 012 013
C
789
456
123
0
RECEIPT
FEED
JOURNAL
FEED
045 052 059 066 073 080 087 094 101 108 038 036 033 030
044 051 058 065 072 079 086 093 100 107 037 035 032 029 023 019
043 050 057 064 071 078 085 092 099 106 027 031 028 022 018
042 049 056 063 070 077 084 091 098 105 027 021 017
041 048 055 062 069 076 083 090 097 104 026 020 015
040 047 054 061 068 075 082 089 096 103 025 014 016
039 046 053 060 067 074 081 088 095 102 011 012 024 013
C
789
456
123
0
RECEIPT
FEED
JOURNAL
FEED
31
Program 4
TE-2200/2400 Dealer's Manual
Function code list
Function Code Initial character
Add check
Arrangement
Birth date
Bill copy
Bottle return
Cancel
Cash amount tendered
Charge
Check endorsement
Check print
Check tender
Clerk number
Clock-in/out
Coupon
Coupon 2
Credit
Cube
Currency exchange
Customer number
Date/Time
Decimal point
Declaration
Department
Deposit
Discount
Eat-in
EBT tender
Enter
Error correct
Flat PLU *
Food stamp status shift
Food stamp subtotal
Food stamp tender
Help
Ketten Bon
Loan
Lock out unused key
Manual tax
Media change
Menu shift
Merchandise subtotal
Minus
Multiplication/Date/Time
Multiplication
New balance
New check
New/old check
No sale
Non-add
Non-add/No sale
ADD CHK
ARG
BILL
BR
CANCEL
CASH
CHARGE
CK.E
CHKP
CHECK
CLK#
CLOCK-IN/OUT
COUPON
CPN2
CREDIT
XXX
CE
CT
DATE/TIME
.
DECLA
DEPTnn
DEPOSIT
%–
EAT-IN
EBTTD
ENT
CORR
PLUnnnn
F/S
FSST
FSTD
HELP
X/KETTEN
LOAN
TAX
MEDIA CHG
MENU
MDST
-
X
X
NB
NEW CHK
NEW/OLD
NS
#
#/NS
094
044
047
053
236
001
002
039
012
003
072
108
023
036
004
090
045
043
101
098
061
nn051
025
028
128
007
105
034
nnnn063
059
081
005
141
113
019
000
032
118
064
080
027
082
100
006
091
093
042
040
041
Function Code Initial character
Normal receipt
OBR
Old check
One touch NLU
Open
Open2
Open check
Operator read/reset
Paid out
Pick up
Plus
PLU
Previous balance
Previous balance subtotal
Premium
Price
Price change
Price inquiry
Price shift
Quantity/for
Rate tax
Recall
Receipt
Receipt on/off
Received on account
Red price
Refund
Review
Separate check
Slip back feed/release
Slip feed/release
Slip print
Square
Stock inquiry
Store
Subtotal
Table number
Takeout
Tax exempt
Tax status shift
Taxable amount subtotal
Text print
Text recall
Three zero
Tip
Tray total
Two zero
Validation
VAT
Void
NRMRCT
OBR
OLD CHK
NLU
OPEN
OPEN2
OPEN CHK
OPE X/Z
PD
P.UP
+
PLU#
PB
PBST
%+
PRC
PRC CHG
PRCINQ
PRICE SHIFT
QT
TAX
RECALL
RCT
RCT ON/OFF
RC
RED
RF
REVIEW
SEP CHK
SB/R
SF/R
SLIP
XX
STKINQ
STORE
SUBTOTAL
TBL#
TAKE-OUT
EXEMPT
T/S
TAST
PRT
CHAR
000
TIP
TRAY TL
00
VLD
VAT
VOID
016
103
092
138
067
068
117
073
021
022
029
048
026
079
030
049
104
008
069
083
031
131
038
076
020
060
033
071
095
054
056
055
084
009
130
075
058
129
062
057
077
011
010
097
015
074
096
037
046
035
* These functions cannot be allocated on TE-2200.
32
Key allocation programming (P4)
Issuing program reading report of program 4 mode
Issuing procedure
Report sample
P
04 ....................
1-----------------------
00 0015-02
011-096
.0009-02
012-098
CASH 0004-02
013-001
—Program read symbol
—Function character/rec-#/file-#
—Hard key code/function code
64s6s
PGM
Mode switch
33
Program 3
TE-2200/2400 Dealer's Manual
Key function/machine feature (Program 3)
General control program
Programming procedure
Program data (by address code)
Address code 01 (date order/password)
Address code 02 (password)
Address code 03 (consecutive number)
Description Choice Program code Initial value
Date order
Year/Month/Day = 0, 1
Day/Month/Year = 2, Month/Day/Year = 3
Monetary mode
0 = 0, ~0 = 1, ~00 = 2, ~000 = 3
Password in Manager mode
Password in X2/Z2 mode
Significant
number (0 ~ 3)
Significant
number (0 ~ 3)
:
D10
:
D9
::::
D8D7D6D5
Dependent upon
initialization code
Dependent upon
initialization code
;;;;
D8D7D6D5
::::
D4D3D2D1
;;;;
D4D3D2D1
Description Choice Program code Initial value
Password in PGM1/PGM2 mode
Always “00”
Always “0000”
Significant
numbers ::::
D10 D9D8D7
;;;;
D10 D9D8D7
;;;;
D4D3D2D1
;;;;
D4D3D2D1
;;
D6D5
;;
D6D5
Description Choice Program code Initial value
Reset consecutive number after daily fixed total reset report is issued.
Always “0”
Consecutive number set value.
It starts “set value + 1.”
Yes = 1
No = 0 :
D8
;
D8
::::::
D6D5D4D3D2D1
;
D7
;
D7
;;;;;;
D6D5D4D3D2D1
63s6::22s66s
:: ::a
PGM
Mode switch
Program data
(Max. 10 digits)
Address code
(2 digits)
~
34
Key function/machine feature (P3)
Address code 04 (tax system, rounding, etc.)
Rounding
Description Choice Program code Initial value
Apply rounding for registration.
No rounding = 0, IF1 = 1, IF2 = 2, Danish = 3, Norwegian = 4,
Singaporean = 5, Finnish = 6, Australian = 7, South Africa = 8
Tax system
Single tax system (1 ~ 10) = 0, U.S. tax system = 1
Canadian tax system = 2, Singaporean tax system = 3
Receipt issuance:
Controlled by receipt on/off switch/key = 0
Always on (issue) = 1, Always off (not issue) = 2
Allow amount tender in RF/REG– mode operation.
Cash drawer opening:
1Immediately when the transaction is finalized.
2After validation compulsory is released.
Food stamp system (in case of D9 = 1)
Payable = 0, Illinois rule = 1, New Jersey rule = 2
Tax exempt quantity of donuts tax. (in case of D9 = 2)
0 ~ 9 (“0” means “No donuts tax”.)
Rounding of results produced by departments, PLUs and scanning PLUs
programmed with package prices and package quantities
High amount limit specification for cash in drawer amount.
(Sentinel function)
Always “00”
a
b
:
D10
:
D9
:
D8
:
(a+b)
D7
Significant
number (0 ~ 8)
Significant
number (0 ~ 3)
Significant
number (0 ~ 2)
Yes = 0
No = 2
1 = 0
2 = 4
Significant
number (0 ~ 2)
Significant
number (0 ~ 9)
Round off = 0
Cut off = 1
Round up = 2
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
:
D5
::
D4D3
;;
D2D1
:
D6
;
D10
;or A
(EX-U.S.) (U.S.)
D9
;
D8
;
(a+b)
D7
;
D6
;
D5
;;
D4D3
;;
D2D1
Finnish rounding
Last 1 digit of
subtotal/cash change Result
0 ~ 2 0
3 ~ 7 5
8 ~ 9 10
Norwegian rounding
Last 1 digit of
subtotal Result
00 ~ 24 0
25 ~ 74 50
75 ~ 99 100
Australian rounding
Last 1 digit of
subtotal/cash change Result
0 ~ 2 0
3 ~ 7 5
8 ~ 9 10
IF 2 rounding
Last 1 digit of subtotal Result
0 ~ 4 0
5 ~ 9 10
IF 1 rounding
Last 1 digit of subtotal Result
0 ~ 2 0
3 ~ 7 5
8 ~ 9 10
Singaporean rounding
Last 1 digit of
item, %+, %- registration Result
0 ~ 2 0
3 ~ 7 5
8 ~ 9 10
Danish rounding
Last 1 digit of
subtotal/change Result
00 ~ 12 00
13 ~ 37 25
38 ~ 62 50
63 ~ 87 75
88 ~ 99 100
South Africa rounding
Last 1 digit of subtotal Result
0 ~ 4 0
5 ~ 9 5
35
Program 3
TE-2200/2400 Dealer's Manual
Address code 05 (print control for receipt)
Description Choice Program code Initial value
Print total line during finalization.
Time system:
1 24 hour system, 2 12 hour system
Feed one line after issuing receipt.
Print consecutive number by double sized letter (up to 3 digits).
Buffered receipt print *1
Skip item lines on journal. (journal skip)
Breakdown set menu printing on receipt, post receipt, guest receipt.
Always “000”
Print number of item sold.
Print tax symbols.
Ignore receipt/journal paper end (not effective for external printer).
Print multiplication or item consolidation in one line.
Print C operation.
Print number of customers on header.
Print PLU number on receipt.
*1: Select “Yes” if you want to print receipts with watermarks.
a
b
c
a
b
a
b
a
b
a
b
c
:
(a+b+c)
D10
:
(a+b)
D9
:
(a+b)
D8
Yes = 0
No = 1
1 = 0
2 = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 1
No = 0
Yes = 4
No = 0
Yes = 1
Yes = 0
No = 2
Yes = 0
No = 1
Yes = 0
No = 4
No = 0
Yes = 1
Yes = 0
No = 2
No = 0
Yes = 4
;;;
D7D6D6
:
(a+b)
D4
:
D3
:
D2
:
(a+b+c)
D1
;
(a+b+c)
D10
;
(a+b)
D9
;
(a+b)
D8
;;;
D7D6D5
;
D3
;
D2
;
(a+b+c)
D1
Sor ;
(EX-U.S.) (U.S.)
(a+b)
D4
36
Key function/machine feature (P3)
Address code 06 (calculation & operation control)
Description Choice Program code Initial value
Follow the taxable status and commission status of previous item when +/-
operation is performed.
Force to register rate tax before finalization.
Force a money declaration by b, n, N before read/reset operation.
Force to press s before finalization
Allow credit balance while finalization.
Allow multiple refund/register minus operation.
Affect the result of +/-, %+/%-, mix & match to the item. (Net totalling)
Include add-on/add-in tax in net total
Include commission in net total.
Treatment of department key numeric inputs:
1 Treat as amount override
2 Treat as quantity extensions
Clear the key buffer when a receipt is issued. (REG1/2 only)
Sounds key catch tone.
Allow to issue post receipt, even if the original one is issued.
Allow program 1 programming in the manager control mode
(X1 mode).
Display “seconds” during time display.
Connect slit drawer.
RF mode status
Prohibit registration when the stock quantity becomes negative.
Alert when the stock quantity becomes under minimum stock quantity.
Affect to stock quantity even if the refund operation.
Treatment of flat-PLU/One touch NLU key numeric inputs:
1 Treat as amount override (effective for flat-PLU only)
2 Treat as quantity extensions
Allow one registration of +/-, %+/%- per one transaction.
Rounding on the least significant digit of %+/%- registration:
0 ~ 2 → 0, 3 ~ 7 → 5, 8 ~ 9 → 10
Display separator.
Allow numeric entry while compulsory drawer opening.
PLU numbering: 1 By memory No. (sequential), 2 By random code
a
b
c
a
b
c
a
b
a
b
a
b
c
a
b
c
a
b
c
a
b
c
a
b
a
b
:
(a+b+c)
D10
:
(a+b+c)
D9
:
(a+b)
D8
:
(a+b)
D7
:
(a+b+c)
D6
:
(a+b+c)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b)
D2
:
(a+b)
D1
Yes = 0
No = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Yes = 0
No = 2
Yes = 0
No = 4
No = 0
Yes = 1
Yes = 0
No = 2
Yes = 0
No = 2
1 = 0
2 = 4
No = 0
Yes = 1
Yes = 0
No = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
RF = 0
REG– = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
1 = 0
2 = 2
No = 0
Yes = 4
No = 0
Yes = 1
Yes = 0
No = 2
Yes = 0
No = 2
1 = 0
2 = 4
;
(a+b+c)
D10
;
(a+b+c)
D9
;
(a+b)
D8
;
(a+b)
D7
;
(a+b+c)
D6
;
(a+b+c)
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
;
(a+b)
D2
;
(a+b)
D1
37
Program 3
TE-2200/2400 Dealer's Manual
Address code 07 (menu & price shift)
Description Choice Program code Initial value
Maintenance of last menu shift:
1 Do not maintain
2 Until next menu shift specification
3 Within this transaction
Maintenance of last price shift:
1 Do not maintain
2 Until next price shift specification
3 Within this transaction
Always “0”
Sheet number of the parent menu sheet
Summed up menu sheet 1 to parent menu sheet.
Summed up menu sheet 2 to parent menu sheet.
Summed up menu sheet 3 to parent menu sheet.
Summed up menu sheet 4 to parent menu sheet.
Summed up menu sheet 5 to parent menu sheet.
Summed up menu sheet 6 to parent menu sheet.
Always “0”
Reset child menu sheets with parent menu sheet together.
This program is not effective for TE-2200.
a
b
c
a
b
c
:
D8
:
D7
;
D6
:
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
;
D2
:
D1
Significant
number (1 ~ 6)
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Yes = 0
No = 1
1 = 0
2 = 1
3 = 2
1 = 0
2 = 1
3 = 2
;
D8
;
D7
;
D6
;
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
;
D2
;
D1
38
Key function/machine feature (P3)
Address code 08 (print control for fixed total report)
Description Choice Program code Initial value
Print gross sales total on fixed total report (GROSS)
Print net sales total on fixed total report (NET)
Print cash in drawer total on fixed total report (CAID)
Print difference between money declaration and cash in drawer total on fixed
total report (CATL, CA+, CA-) (Skip these lines, if “CAID” is set to skip.)
Print charge in drawer total on fixed total report (CHID)
Print difference between money declaration and charge in drawer total on
fixed total report (CHTL, CH+, CH-) (Skip these lines, if “CHID” is set to
skip.)
Print check in drawer total on fixed total report (CKID)
Print difference between money declaration and check in drawer total on
fixed total report (CKTL, CK+, CK-) (Skip these lines, if “CKID” is set to
skip.)
Print credit in drawer total on fixed total report (CRID(1) ~ (4))
Print difference between money declaration and credit in drawer total on
fixed total report (CRTL, CR+, CR-) (Skip these lines, if “CRID” is set to
skip.)
Print food stamp in drawer total on fixed total report (FSID)
Print food stamp cash change total on fixed total report (FSCACG)
Print EBT in drawer total on fixed total report (EBTTL)
Print EBT cash change total on fixed total report (EBTCACG)
Print RF mode total on fixed total report (RF)
Print the net number of customers on fixed total report (CUST)
Print the average sales per customer on fixed total report (AVER)
Print check cashing handling fee total on fixed total report (FEE)
Print temporary finalize service charge total on fixed total report (+)
Not used
Print commission 1 total on fixed total report (C-1)
Print commission 2 total on fixed total report (C-2)
Print foreign currency cash in drawer and check in drawer totals on fixed
total report (CECA1 ~ 4, CECK1 ~ 4)
Print <MINUS>, <COUPON>, <%–> and mix & match operation net total
on fixed total report (DC)
Print <REFUND> and <VOID> operation net total on fixed total report
(REF)
Print total number of <CLEAR> operation net total on fixed total report
(CLEAR)
Print nontaxable totals on fixed total report (NON TAX)
Print rounding totals on fixed total report (ROUND)
Print cancellation total on fixed total report (CANCEL)
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
a
b
c
a
b
c
a
b
c
a
b
c
:
(a+b+c)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
(a+b+c)
D7
:
(a+b+c)
D6
:
(a+b)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b+c)
D2
:
(a+b+c)
D1
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 1
Yes = 0
No = 2
(Always “4”)
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
;
(a+b+c)
D10
G
(a+b+c)
D9
S
(a+b+c)
D8
J
(a+b+c)
D7
D
(a+b+c)
D6
S
(a+b)
D5
J
(a+b+c)
D4
J
(a+b+c)
D3
J
(a+b+c)
D2
A (Australia)
or
D (other area)
D1
39
Program 3
TE-2200/2400 Dealer's Manual
Address code 09 (print control for fixed total report)
Description Choice Program code Initial value
Print taxable amount 1 total on fixed total report (TA1)
Print tax 1 total on fixed total report (TX1)
Print tax exempt 1 total on fixed total report (EX1)
Print taxable amount 2 total on fixed total report (TA2)
Print tax 2 total on fixed total report (TX2)
Print tax exempt 2 total on fixed total report (EX2)
Print taxable amount 3 total on fixed total report (TA3)
Print tax 3 total on fixed total report (TX3)
Print tax exempt 3 total on fixed total report (EX3)
Print taxable amount 4 total on fixed total report (TA4)
Print tax 4 total on fixed total report (TX4)
Print tax exempt 4 total on fixed total report (EX4)
Print taxable amount 5 total on fixed total report (TA5)
Print tax 5 total on fixed total report (TX5)
Print tax exempt 5 total on fixed total report (EX5)
Print taxable amount 6 total on fixed total report (TA6)
Print tax 6 total on fixed total report (TX6)
Print tax exempt 6 total on fixed total report (EX6)
Print taxable amount 7 total on fixed total report (TA7)
Print tax 7 total on fixed total report (TX7)
Print tax exempt 7 total on fixed total report (EX7)
Print taxable amount 8 total on fixed total report (TA8)
Print tax 8 total on fixed total report (TX8)
Print tax exempt 8 total on fixed total report (EX8)
Print taxable amount 9 total on fixed total report (TA9)
Print tax 9 total on fixed total report (TX9)
Print tax exempt 9 total on fixed total report (EX9)
Print taxable amount 10 total on fixed total report (TA10)
Print tax 10 total on fixed total report (TX10)
Print tax exempt 10 total on fixed total report (EX10)
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
:
(a+b+c)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
(a+b+c)
D7
:
(a+b+c)
D6
:
(a+b+c)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b+c)
D2
:
(a+b+c)
D1
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
F
(a+b+c)
D10
J (Australia)
or
F (other area)
D9
J
(a+b+c)
D8
J
(a+b+c)
D7
J
(a+b+c)
D6
J
(a+b+c)
D5
J
(a+b+c)
D4
J
(a+b+c)
D3
J
(a+b+c)
D2
J
(a+b+c)
D1
40
Key function/machine feature (P3)
Address code 13 (online control)
Address code 10 (print control for taxable amount, till timer)
Description Choice Program code Initial value
Issue reset report at satellites during Z consolidation. *
(for in/online master/satellite)
Add daily total data to consolidation file when reset operation has been
performed. (for inline master/satellite)
Prohibit operation when data exists in the consolidation file.
Always “000”
* This option is effective, when consolidation is activated by job command.
a
b
:
(a+b)
D5
:
D4
;;;
D3 D2 D1
No = 0
Yes = 2
Yes = 0
No = 4
No = 0
Yes = 1
;
(a+b)
D5
;
D4
;;;
D3 D2 D1
Description Choice Program code Initial value
Print taxable amount 1 on receipt/journal.
Print taxable amount 2 on receipt/journal.
Print taxable amount 3 on receipt/journal.
Print taxable amount 4 on receipt/journal.
Print taxable amount 5 on receipt/journal.
Print taxable amount 6 on receipt/journal.
Print taxable amount 7 on receipt/journal.
Print taxable amount 8 on receipt/journal.
Print taxable amount 9 on receipt/journal.
Print taxable amount 10 on receipt/journal.
Always “0”
Prohibit registrations,
1 while all drawers are opened. 2 while clerk’s own drawer is opened.
Ignore compulsory drawer sensor.
Till timer (00 ~ 59 minutes)
Till timer (00 ~ 59 seconds)
a
b
c
a
b
c
a
b
c
a
b
:
(a+b+c)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
D7
;
D6
:
(a+b)
D5
::
D4D3
::
D2D1
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
1 = 0
2 = 1
No = 0
Yes = 2
Significant
numbers
Significant
numbers
;
(a+b+c)
D10
;
(a+b+c)
D9
;
(a+b+c)
D8
;
D7
;
D6
;
(a+b)
D5
;;
D4D3
;;
D2D1
41
Program 3
TE-2200/2400 Dealer's Manual
Address code 14 (currency exchange control)
Description Choice Program code Initial value
Monetary mode of CECA1 and CECK1 in fixed total report:
Decimal for CECA1 and CECK1 in fixed total report:
1 Period = 0, 2 Comma = 1
Separator for CECA1 and CECK1 in fixed total report:
1 Comma = 0, 2 Period = 1
Monetary mode of CECA2 and CECK2 in fixed total report:
Decimal for CECA2 and CECK2 in fixed total report:
1 Period = 0, 2 Comma = 1
Separator for CECA2 and CECK2 in fixed total report:
1 Comma = 0, 2 Period = 1
Monetary mode of CECA3 and CECK3 in fixed total report:
Decimal for CECA3 and CECK3 in fixed total report:
1 Period = 0, 2 Comma = 1
Separator for CECA3 and CECK3 in fixed total report:
1 Comma = 0, 2 Period = 1
Monetary mode of CECA4 and CECK4 in fixed total report:
Decimal for CECA4 and CECK4 in fixed total report:
1 Period = 0, 2 Comma = 1
Separator for CECA4 and CECK4 in fixed total report:
1 Comma = 0, 2 Period = 1
a
b
a
b
a
b
a
b
:
D8
:
(a+b)
D7
:
D6
:
(a+b)
D5
:
D4
:
(a+b)
D3
:
D2
:
(a+b)
D1
Significant
number (0 ~ 9)
1 = 0
2 = 1
1 = 0
2 = 4
Significant
number (0 ~ 9)
1 = 0
2 = 1
1 = 0
2 = 4
Significant
number (0 ~ 9)
1 = 0
2 = 1
1 = 0
2 = 4
Significant
number (0 ~ 9)
1 = 0
2 = 1
1 = 0
2 = 4
;
D8
;
(a+b)
D7
;
D6
;
(a+b)
D5
;
D4
;
(a+b)
D3
;
D2
;
(a+b)
D1
42
Key function/machine feature (P3)
Address code 15 (print control for reports)
Description Choice Program code Initial value
Zero skip department report.
Zero skip clerk report.
Zero skip transaction report.
Zero skip PLU report.
Zero skip hourly report.
Zero skip group report.
Zero skip monthly report.
Zero skip table analysis report.
Skip a not clocked out employee on the time & attendance report.
Zero skip mix & match report.
Prohibit issuing “OPEN CHECK Z” report.
Prohibit issuing “Daily Z” report, if opened check exists.
Skip the non-programmed record of scanning PLU saving data to CF card
Exclude the record No. field from scanning PLU saving data to CF card
Open cash drawer when the financial or fixed total report is issued.
Print PLU number on the PLU report.
Print sales ratio.
Issue double Z report.
Print the recalculate amount of taxable amount and tax amount of single tax.
Print average sales in the monthly report.
Contents of double Z report:
1: Fixed total report only, 2: Batch report *
* Fixed total should be included in this batch.
Reset actual stock quantity after PLU reset report issuance by batch X/Z.
Print reset counter.
Print item discount totalizer.
Print order of PLU report:
1 Memory No. (sequential), 2 = Random code
With character of X/Z data stored to CF card
With random code of X/Z data stored to CF card
With OBR code of X/Z data stored to CF card
a
b
a
b
c
a
b
c
a
b
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
:
(a+b)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
(a+b)
D7
:
(a+b)
D6
:
(a+b)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b+c)
D2
:
(a+b+c)
D1
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 2
Yes = 0
No = 4
No = 0
Yes = 1
No = 0
Yes = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Yes = 0
No = 1
1 = 0
2 = 2
No = 0
Yes = 4
Yes = 0
No = 1
No = 0
Yes = 2
1 = 0
2 = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
;
(a+b)
D10
;
(a+b+c)
D9
;
(a+b+c)
D8
;
(a+b)
D7
;
(a+b)
D6
;
(a+b)
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
;
(a+b+c)
D2
;
(a+b+c)
D1
43
Program 3
TE-2200/2400 Dealer's Manual
Address code 16 (print control for grand total)
Description Choice Program code Initial value
Contents of the periodic 1 total:
• Normal registration only = 0
• Training registration only = 1
• Both normal registration and training registration = 2
Contents of the periodic 2 total:
• Normal registration only = 0
• Training registration only = 1
• Both normal registration and training registration = 2
Journal printing of the periodic 1 report
Journal printing of the periodic 2 report
Print consecutive number range of the day on daily fixed total report.
Always “0000”
Print grand total 1 on periodic 1/periodic 2 reset report.
Print grand total 2 on periodic 1/periodic 2 reset report.
Print grand total 3 on periodic 1/periodic 2 reset report.
Print grand total 1 on daily sales reset report.
Print grand total 2 on daily sales reset report.
Print grand total 3 on daily sales reset report.
a
b
a
b
c
a
b
c
:
D10
:
D9
:
(a+b)
D8
:
D7
;;;;
D6D5D4D3
:
(a+b+c)
D2
:
(a+b+c)
D1
Significant
number (0 ~ 2)
Significant
number (0 ~ 2)
Yes = 0
No = 1
Yes = 0
No = 2
No = 0
Yes = 1
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
;
D10
;
D9
;
(a+b)
D8
;
D7
;;;;
D6D5D4D3
J
(a+b+c)
D2
;
(a+b+c)
D1
44
Key function/machine feature (P3)
Address code 17 (print control)
Description Choice Program code Initial value
Money declaration compulsory (cash) in REG/RF mode
Money declaration compulsory (charge) in REG/RF mode
Money declaration compulsory (check) in REG/RF mode
Money declaration compulsory (credit) in REG/RF mode
Always “0”
Commission:
1 Taxable amount × commission rate
2 (Taxable amount + VAT) × commission rate
Whenever pressing <PLUS>, <MINUS>, or <COUPON> the amount
registered is proportioned among all taxable amounts.
Rounding of commission:
Round off = 0, Cut off = 1, Round up = 2
Append two zeros in unit price programming.
Print normal price and the difference between the normal price and the
reduced price on receipt.
Print date on receipt.
Print date on journal.
Print consecutive number on receipt/journal.
Print time on receipt.
Print time on journal.
Merge the same department/PLU/scanning PLU registration on buffered
receipt and post receipt. (Item consolidation)
Always “00”
a
b
c
a
b
a
b
a
b
c
a
b
c
:
(a+b+c)
D10
:
D9
;
D8
:
(a+b)
D7
:
D6
:
(a+b)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
;;
D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
1 = 0
2 = 1
No = 0
Yes = 2
Significant
number (0 ~ 2)
No = 0
Yes = 1
No = 0
Yes = 2
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
No = 0
Yes = 4
;
(a+b+c)
D10
;
D9
;
D8
;
(a+b)
D7
;
D6
;
(a+b)
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
;;
D2D1
45
Program 3
TE-2200/2400 Dealer's Manual
Address code 18 (print control for guest receipt and slip)
Description Choice Program code Initial value
Maximum printing lines of slip (00 ~ 99)
Slip printing speed:
“Maximum printing lines of slip” is necessary, if you select “High”.
Classify registered item by group on slip & guest receipt.
Always “0”
Print date on slip & guest receipt.
Print time on slip & guest receipt.
Print:
1 Total only, 2 Detail when D6 = 4 (item consolidated)
Slip print range:
1 At the top of the transaction, 2 This receipt
Enable slip auto line find.
Merge the same department/PLU/scanning PLU registration on slip & guest
receipt. (Item consolidation)
Slip auto feed lines (00 ~ 99)
a
b
a
b
c
a
b
c
::
D8D7
:
(a+b)
D6
;
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
::
D2D1
Significant
numbers
Low = 0
High = 2
No = 0
Yes = 4
Yes = 0
No = 1
Yes = 0
No = 2
1 = 0
2 = 4
1 = 0
2 = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
numbers
;;
D8D7
;
(a+b)
D6
;
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
;;
D2D1
Address code 19 (order control)
Description Choice Program code Initial value
Print order with order character.
Print order with amount.
Alert when the order printer 1 goes down.
If “No”, backup processing is performed.)
Alert when the order printer 2 goes down.
(If “No”, backup processing is performed.)
Breakdown set menu printing on order.
Print double-height characters in UP-360/(internal R/J printer).
(not only for order, but also effective for receipt)
Show guidance for backup print of order. (when it is backed up from R/J)
Always “0”
Cut order.
Print dashed lines (hyphens).
Print orders even if training clerk is registered items.
Merge the same department/PLU/scanning PLU registration on order receipt.
(Item consolidation)
Number of feed lines before order printing (0 ~ 9)
Number of feed lines after order printing (0 ~ 9)
a
b
a
b
c
a
b
a
b
:
(a+b)
D9
:
(a+b+c)
D8
:
D7
:
D6
;
D5
:
(a+b)
D4
:
(a+b)
D3
:
D2
:
D1
No = 0
Yes = 1
No = 0
Yes = 2
Yes = 0
No = 1
Yes = 0
No = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Significant
number
;
(a+b)
D9
;
(a+b+c)
D8
;
D7
;
D6
;
D5
;
(a+b)
D4
;
(a+b)
D3
;
D2
F
D1
46
Key function/machine feature (P3)
Address code 21 (message control)
Description Choice Program code Initial value
Print graphic type logo.
(If select “No”, character type logo is printed.)
Print watermark on receipt.
Print commercial message on slip/guest receipt.
Print bottom message on slip/guest receipt.
Print intermediate message on slip/guest receipt.
Print bill top message.
Print bill copy message.
Print bill bottom message.
Always “0”
Print commercial message on receipts in REG/RF mode.
Print bottom message on receipts in REG/RF mode.
Print commercial message on journal in REG/RF mode.
Print bottom message on journal in REG/RF mode.
Print commercial message on receipts in X/Z mode.
Print bottom message on receipts in X/Z mode.
Print commercial message on journal in X/Z mode.
Print bottom message on journal in X/Z mode.
Print commercial message on receipt in PGM mode.
Print bottom message on receipt in PGM mode.
Print commercial message on journal in PGM mode.
Print bottom message on journal in PGM mode.
Print commercial message on FC or AUTO-PGM receipts.
Print bottom message on FC or AUTO-PGM receipts.
Print commercial message on FC or AUTO-PGM journal.
Print bottom message on FC or AUTO-PGM journal.
Print Australian GST MOF message.
a
b
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
:
(a+b)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
;
D7
:
(a+b+c)
D6
:
(a+b+c)
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
:
(a+b+c)
D2
:
(a+b)
D1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 4
;
(a+b)
D10
;
(a+b+c)
D9
;
(a+b+c)
D8
;
D7
;
(a+b+c)
D6
;
(a+b+c)
D5
;
(a+b+c)
D4
;
(a+b+c)
D3
;
(a+b+c)
D2
;
(a+b)
D1
47
Program 3
TE-2200/2400 Dealer's Manual
Address code 25 (condiment etc.)
Address code 26 (check tracking)
Description Choice Program code Initial value
Check tracking method:
1 Check No., 2 Table No.
Maximum digit of check number:
1 6-digit, 2 12-digit
(If you use “table analysis” or “table range”, select 1.)
Tax calculation by new balance
(Calculation result is not saved into totalizer.)
Enable to perform <NEW/OLD> during check tracking/clerk interrupt.
Print previous balance amount, when registration begins 0 with old check.
Always “000”
a
b
a
b
:
(a+b)
D6
:
D5
:
(a+b)
D4
;;;
D3D2D1
1 = 0
2 = 1
1 = 0
2 = 4
No = 0
Yes = 1
No = 0
Yes = 1
Yes = 0
No = 2
;
(a+b)
D6
;
D5
;
(a+b)
D4
;;;
D3D2D1
Description Choice Program code Initial value
Enable to register a non-department link PLU.
Subtotal display:
1 Both “rounded” and “not rounded” subtotal
2 Only “not rounded” subtotal
(This option is effective for selecting Eu/Aus rounding specification only.)
Previous item void:
1 By using <VOID>; ordinary procedure
2 By using <REVIEW>
Restrict (to 0 or 5) on the last one digit for amount tender.
Obey registration quantities of child PLU to its parent PLU.
Restriction (to 0 or 5) on the last one digit for <CASH>, <RC>, <PD>,
money declaration amount (by <CASH> or <NON ADD>).
a
b
c
:
D4
:
D3
:
D2
:
(a+b+c)
D1
Yes = 0
No = 1
1 = 1
2 = 0
1 = 0
2 = 1
No = 0
Yes = 1
Yes = 0
No = 2
No = 0
Yes = 4
;
D4
A (Australia)
or
; (other area)
D3
A
D2
F (Australia)
or
; (other area)
D1
Address code 27 (clerk control)
Description Choice Program code Initial value
Enable clerk/cashier interrupt.
Print of clerk/cashier's name on receipt following sign back on at D10 = 1.
(enable clerk/cashier interrupt)
Always “0000000”
Auto sign-off timer. (in second) (“00” means no auto sign-off.)
a
b
:
(a+b)
D10
;~;
D9~D
3
::
D2D1
No = 0
Yes = 1
No = 0
Yes = 4
Significant
numbers
;
(a+b)
D10
;~;
D9~D
3
;;
D2D1
48
Key function/machine feature (P3)
Address code 29 (Euro)
Address code 28 (Euro)
Description Choice Program code Initial value
Define Euro as the main currency.
Select rounding option:
Round off = 0, Cut off = 1, Round up = 2
Exchange rate (within 6-digits)
Decimal point position of exchange rate:
Integer only = 0
1st decimal place = 1, 2nd decimal place = 2, 3rd decimal place = 3,
4th decimal place = 4, 5th decimal place = 5, 6th decimal place = 6
Example: (D8 ~ D2)
1 Euro = 1.977 DM; Set “0019773”
1 Euro = 1957.77319 Lit; Set “1957772”
Always “0”
:
D10
:
D9
::::::
D8D7D6D5D4D3
:
D2
;
D1
Yes = 0
No = 1
Significant
number (0 ~ 2)
Significant
numbers
Significant
number (0 ~ 6)
;
D10
;
D9
;;;;;;
D8D7D6D5D4D3
;
D2
;
D1
Description Choice Program code Initial value
Monetary mode of sub currency:
0 = 0, ~0 = 1, ~00 = 2, ~000 = 3
Apply rounding for sub currency. *
No rounding = 0, IF1 = 1, IF2 = 2, Danish = 3, Norwegian = 4, Finnish = 6
Australia = 7, South Africa = 8
Cash drawer number of sub currency: 0 ~ 2
(“0” means main drawer.)
Print tendered amount in sub currency converted to main currency.
Selection of the currency of subtotal printout:
1 Main currency only, 2 Main and sub currency
Print total in sub currency by double sized letter.
Selection of the currency of change:
1 Main currency, 2 Sub currency
Print the cash in drawer of sub currency on fixed total reports.
(If the cash in drawer of main currency is skipped, this line is also skipped.)
Display symbol of sub currency:
1 e(Euro), 2 l(Local)
The currency to restrict (to 00, 25, 50, 75) on last two digits for amount
tendered: 1 Main currency, 2 Sub currency
(It is necessary to set this restriction to <CASH> key.)
Print rounding total of sub currency on fixed totalier report.
Last 1 digit for sub currency monetary amount entries to 0 or 5.
Selection of the change amount printout:
1 Main and sub currency, 2 Dependent upon D6 - a of this worksheet
Calculation method of change amount in sub currency:
1 Convert the change amount in main currency into sub currency.
2 Subtract the equivalent value of subtotal amount in sub currency from
the equivalent value of the tendered amount in sub currency.
Always “000”
* Refer to the Address code 04 programming.
a
b
c
a
b
c
a
b
c
a
b
:
D10
:
D9
:
D8
:
(a+b+c)
D7
:
(a+b+c)
D6
:
(a+b+c)
D5
:
(a+b)
D4
;;;
D3D2D1
Significant
number (0 ~ 3)
Significant
number (0 ~ 8)
Significant
number (0 ~ 2)
No = 0
Yes = 1
1 = 0
2 = 2
No = 0
Yes = 4
1 = 0
2 = 1
No = 0
Yes = 2
1 = 0
2 = 4
1 = 0
2 = 1
No = 0
Yes = 2
No = 0
Yes = 4
1 = 0
2 = 1
1 = 0
2 = 2
S
D10
;
D9
;
D8
;
(a+b+c)
D7
;
(a+b+c)
D6
;
(a+b+c)
D5
;
(a+b)
D4
;;;
D3D2D1
49
Program 3
TE-2200/2400 Dealer's Manual
Address code 31 (scanning)
Address code 32 (direct maintenance PLU)
Description Choice Program code Initial value
Journal compressed print (print by half height characters)
Always “000”
:
D4
;;;
D3D2D1
No = 0
Yes = 1 ;
D4
;;;
D3D2D1
Description Choice Program code Initial value
Skip the unit price field programming of direct maintenance PLU file in
PGM 1 mode.
Skip the link field programming of direct maintenance PLU file in PGM 1
mode.
Always “000”
Skip the optimum stock field programming of direct maintenance PLU file
in PGM 3 mode.
Skip the unit price field programming of direct maintenance PLU file in
PGM 3 mode.
Skip the link field programming of direct maintenance PLU file in PGM 3
mode.
Skip the character field programming of direct maintenance PLU file in
PGM 3 mode.
Skip the status field programming of direct maintenance PLU file in PGM 3
mode.
Skip the bottle link field programming of direct maintenance PLU file in
PGM 3 mode.
Skip the mix & match field programming of direct maintenance PLU file in
PGM 3 mode.
Always “00”
a
b
a
b
c
a
b
c
:
(a+b)
D9
;;;
D8 D7 D6
:
D5
:
(a+b+c)
D4
:
(a+b+c)
D3
;;
D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
+
(a+b)
D9
;;;
D8 D7 D6
;
D5
+
(a+b+c)
D4
+
(a+b+c)
D3
;;
D2D1
Description Choice Program code Initial value
The oldest item is deleted if the scanning PLU file becomes full.
(If “No” is selected, alert only.)
Print consolidated scanning PLU reset report. (only for master) *
Print report before scanning PLU Z consolidation. *
Print scanning PLU code on receipt.
Print scanning PLU code on journal.
Print scanning PLU code on report.
Always “00”
Inactive days:
(If a scanning PLU did not move during these days period, this item will
be printed on the Inactive scanning PLU report.)
* These options are also effective, when consolidation is activated by job command.
a
b
a
b
c
:
D8
:
(a+b)
D7
:
(a+b+c)
D6
;;
D5D4
:::
D3D2D1
Yes = 0
No = 1
No = 0
Yes = 1
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
numbers
(000 ~ 999)
;
D8
;
(a+b)
D7
H
(a+b+c)
D6
;;
D5D4
;;;
D3D2D1
Address code 30 (Internal thermal printer control)
50
Key function/machine feature (P3)
Address code 33 (batch PLU maintenance)
Description Choice Program code Initial value
Skip the record No. designation of batch maintenance PLU file.
Skip the optimum stock field programming of batch maintenance PLU file.
Skip the unit price field programming of batch maintenance PLU file.
Skip the link field programming of batch maintenance PLU file.
Skip the character field programming of batch maintenance PLU file.
Skip the status field programming of batch maintenance PLU file.
Skip the bottle link field programming of batch maintenance PLU file.
Skip the mix & match field programming of batch maintenance PLU file.
Always “000”
Always “00”
Always “00”
a
b
a
b
c
a
b
c
No = 0
Yes = 1
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
;
(a+b)
D10
:
(a+b)
D10
;
(a+b+c)
D9
:
(a+b+c)
D9
;
(a+b+c)
D8
:
(a+b+c)
D8
;;;
D7D6D5
;;;
D7D6D5
;;
D2D1
;;
D2D1
Address code 34 (backlight control)
Description Choice Program code Initial value
Backlight
Always “0”
Backlight off timer (01 ~ 59 min. “00” means always on.)
* This program is only effective for Eu.
:
D4
;
D3
::
D2D1
Available = 0
Not available = 1
Significant
numbers
;
D4
;
D3
;;
D2D1
;;
D4D3
;;
D4D3
51
Program 3
TE-2200/2400 Dealer's Manual
Address code 37 (check number)
Description Choice Program code Initial value
Auto check starting number (0000 = 0001) *
Auto check ending number (0000 = 9999) *
* The starting number should be smaller than the ending number.
* If the starting number is bigger than the ending number, the E056 is occurred.
::::
D8D7D6D5
Significant
numbers
(0000 ~ 9999)
Significant
numbers
(0000 ~ 9999)
::::
D4D3D2D1
;;;;
D8D7D6D5
;;;;
D4D3D2D1
Address code 36 (store/recall/auto new check number)
Description Choice Program code Initial value
Reset the store/recall/auto new check starting number after open check reset report
Store/recall/auto new check starting number (0000 = 0001) *
Store/recall/auto new check ending number (0000 = 9999) *
* The starting number should be smaller than the ending number.
* If the starting number is bigger than the ending number, the E056 is occurred.
::::
D8D7D6D5
Significant
numbers
(0000 ~ 9999)
Significant
numbers
(0000 ~ 9999)
::::
D4D3D2D1
;;;;
D8D7D6D5
;;;;
D4D3D2D1
No = 0
Yes = 1 :
D9
;
D9
52
Key function/machine feature (P3)
Department key/flat-PLU key/PLU program (Batch feature programming)
Programming procedure
Department/flat-PLU key
PLU
Program data
To another department/flat-PLU key
Description Choice Program code Initial value
Single item control:
Normal receipt = 0, Single item receipt = 3
Price change registration is enable.
(Only effective for scanning PLU linked to this department)
Multiplication registration is enable.
(Only effective for scanning PLU linked to this department)
Compulsory input unit price manually.
(Only effective for scanning PLU linked to this department)
Normal/condiment/preparation (Not for department)
Normal item = 0, Condiment = 1, Preparation = 2
Disable operation in RF/REG– mode.
Disable operation in REG 2 mode.
Disable operation in REG 1 mode.
Taxable status:
See the next page.
Enable 0 unit price.
Enable negative price.
Hash
Always “0”
Low digit limitation (LDL) for manually entered unit price.
Multiple validation:
(If “No”, validation is allowed only one time.)
Print difference between the normal price and reduced price.
Open PLU (only for PLU)
Commission 1
Commission 2
Prepared tax status (Canadian tax)
Compulsory number of condiment/preparation PLU input.
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
:
D12
:
(a+b+c)
D11
:
D10
:
(a+b+c)
D9
::
D8D7
:
(a+b+c)
D6
:
D5
:
D4
:
(a+b+c)
D3
:
(a+b+c)
D2
:
D1
Significant
number
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Yes = 0
No = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
Yes = 0
No = 4
Significant
number (0 ~ 8)
;
D12
;
(a+b+c)
D11
;
D10
;
(a+b+c)
D9
;;
D8D7
;
(a+b+c)
D6
;
D5
;
D4
;
(a+b+c)
D3
;
(a+b+c)
D2
;
D1
63s6B6::66s
PGM
Mode switch
Program data
(12 digits)
Department
Flat-PLU
MENU
SHIFT ~
63s6+6::6a6s
PGM
Mode switch
To a new (not sequential) PLU
Program data
(12 digits)
Different program to the next PLU
(Rec No. 4 digits)
(Random code 6 digits)
PLU No.
~
53
Program 3
TE-2200/2400 Dealer's Manual
Taxable status
for the U.S./Singapore
Food stamp (for Singapore, always “0”)
Taxable 1 status
Taxable 2 status
Taxable 3 status
for Canada
Donuts status
Non tax = 0 Taxable 3 = 3 Taxable 1 & 3 = 6
Taxable 1 = 1 Taxable 4 = 4 Taxable 1 & 4 = 7
Taxable 2 = 2 Taxable 1 & 2 = 5
for Other area
Non tax = 0 Taxable 4 = 4 Taxable 8 = 8
Taxable 1 = 1 Taxable 5 = 5 Taxable 9 = 9
Taxable 2 = 2 Taxable 6 = 6 Taxable 10 = 10
Taxable 3 = 3 Taxable 7 = 7
a
b
c
:
D8
:
(a+b+c)
D7
:
D8
:
D7
::
D8D7
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Significant
number
Significant
numbers
54
Key function/machine feature (P3)
Department key/flat-PLU key/PLU program (Individual feature programming)
Programming procedure
Department/flat-PLU key
PLU
Program data (by address code)
Address code 11 (link)
Range (Department/PLU/flat-PLU)
Description Choice Program code
Link group record number: (00 ~ 99)
Link department record number: (00 ~ 99)
(only for PLU)
::
D4D3
::
D2D1
Significant
numbers
Significant
numbers
6
3s
6
::66s
6
+
6
::
6
a
6
s
63s6::66s6::66s
PGM
Mode switch
To another department/flat-PLU key
Program data
Department
Flat-PLU
Same program
Address code
~
PGM
Mode switch
To a new (not sequential) PLU
Program data
Same program
Address code
PLU No.
Different program to the next PLU
~
6
3s
6
990000 ::s
6
::66s
6
6
::
6
a
6
::
6
a
6
::a
6
s
PGM
Mode switch
Program data
Address code
Department = 05
PLU/flat-PLU = 04
Start rec-# End rec-#
Starts “0001”. Ends “the last record”.
}
~~~
55
Program 3
TE-2200/2400 Dealer's Manual
Address code 14 (stock)
Address code 15 (high amount limit)
Address code 13 (set menu)
Address code 12 (random code)
Description Choice Program code
PLU random code (only for PLU) ::::::
D6D5D4D3D2D1
Significant
numbers
Description Choice Program code
Set menu table/bottle link table record number (only for PLU)
Set menu table/bottle link table file number (only for PLU)
File number: set menu table = 28, bottle link table = 73
::::
D6D5D4D3
::
D2D1
Significant
numbers
Significant
numbers
Description Choice Program code
Optimum stock quantity (0.001 ~ 99.999)
Enter without decimal point. (only for PLU) :::::
D5D4D3D2D1
Significant
numbers
Description Choice Program code
High amount limit for entering unit price manually. ::::::
D6D5D4D3D2D1
Significant
numbers
Address code 16 (order control)
Description Choice Program code
Order character record number (00 ~ 99)
Printing color of order:
Print order to “Order 1 (printer connection table)” printer.
Print order to “Order 2 (printer connection table)” printer.
Print order to “Order 3 (printer connection table)” printer.
Always “00”
a
b
c
::
D6D5
:
D4
:
(a+b+c)
D3
;;
D2D1
Significant
numbers
Normal = 0
Reverse = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
56
Key function/machine feature (P3)
Other address code
Address
code Description Choice Program code
Single item control:
Normal receipt = 0, Single item receipt = 3
Price change registration is enable.
(Only effective for scanning PLU linked to this department)
Multiplication registration is enable.
(Only effective for scanning PLU linked to this department)
Compulsory input unit price manually.
(Only effective for scanning PLU linked to this department)
Normal/condiment/preparation
Normal item = 0, Condiment = 1, Preparation = 2
Disable operation in RF/REG– mode.
Disable operation in REG 2 mode.
Disable operation in REG 1 mode.
Taxable status:
See the status table of the batch feature programming section.
Enable 0 unit price.
Enable negative price.
Hash
Low digit limitation (LDL) for manually entered unit price.
Multiple validation:
(If “No”, validation is allowed only one time.)
Print difference between the normal price and reduced price.
Open PLU (Only for PLU)
Commission 1
Commission 2
Prepared tax status (Canadian tax)
Compulsory number of condiment/preparation PLU input.
a
b
c
a
b
c
a
b
c
:
:
(a+b+c)
:
:
(a+b+c)
::
D2D1
:
(a+b+c)
:
:
(a+b+c)
:
(a+b+c)
:
Significant
number
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
numbers
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Yes = 0
No = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
Yes = 0
No = 4
Significant
number (0 ~ 8)
18
19
01
02
03
05
07
04
09
10
a
b
c
a
b
c
Address code 17 (Bon receipt control)
Description Choice Program code
Number of Bon receipts (1 ~ 9)
(If “0”, no Bon is issued.) :
D1
Significant
number
57
Program 3
TE-2200/2400 Dealer's Manual
Transaction key program
Programming procedure
Program data
<CASH>, <CHARGE>, <CHECK>
Description Choice Program code
Restriction (to 0, 5) on last digit for amount tendered.
(Only effective for <CHARGE> or <CHECK>)
Allowable number of validation printing (“0” means no limitation) *1 *2 *3 *4 *5
Force validation operation. *1 *2 *3 *4 *5
Restriction (to 00, 25, 50, 75) on last two digits for amount tendered
(Only for <CASH> in Danish rounding) *5
Disable operation in RF/REG– mode. *1 *4 *5
Disable operation in REG2 mode. *1 *4 *5
Disable operation in REG1 mode. *1 *4 *5
Force batch slip printing. *1 *2 *4
Force check endorsement printing (Only for <CHECK>). *3 *4 *5
Force check printing (Only for <CHECK>). *3 *4 *5
Prohibit entry of a partial payment
Prohibit the entry of the amount tendered.
Force entry of the amount tendered.
Print VAT breakdown. *1 *2 *4
Check cashing commission (Only for <CHECK>) *3
1 Use an amount 2 Use a rate
Validation amount *3 *4
1 Print subtotal amount 2 Print amount tendered
Perform Finnish rounding.
High amount limit specification for subtotal and tendering amounts. *3
High amount limit specification for change amount due.
*1 Those are valid options for Auto Cash as well.
*2 Those are valid options for Single item as well.
*3 Those are valid options for Cashing a check as well.
*4 Those are valid options for Currency exchange (include partial tender) as well.
*5 Those are valid options for Media change (include partial tender) as well.
a
b
a
b
c
a
b
c
a
b
c
a
b
c
:
D12
:
D11
:
(a+b)
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
(a+b+c)
D7
:
(a+b+c)
D6
:
D5
::
D4D3
::
D2D1
No = 0
Yes = 1
Significant number
(0 ~ 9)
No = 0
Yes = 1
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Amount = 0
Rate = 2
Subtotal = 0
Tender = 4
No = 0
Yes = 4
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
63s6::66s
PGM
Mode switch
To another transaction key
Program data
Transaction
key
~
58
Key function/machine feature (P3)
<CREDIT>
Description Choice Program code
Restriction (to 0, 5) on last digit for amount tendered.
Allowable number of validation printing (“0” means no limitation) *1
Force validation operation. *1
Disable operation in RF/REG– mode. *1
Disable operation in REG2 mode. *1
Disable operation in REG1 mode. *1
Force batch slip printing.
Prohibit entry of a partial payment
Prohibit the entry of the amount tendered.
Force entry of the amount tendered.
Print VAT breakdown.
Validation amount
1 Print subtotal amount 2 Print amount tendered
Perform Finnish rounding.
High amount limit specification for subtotal and tendering amounts.
Always “0”
Specify credit in drawer total in the fixed totalizer. *1
*1 Those are valid options for Media change (include partial tender) as well.
a
b
c
a
b
c
a
b
:
D12
:
D11
:
D10
:
(a+b+c)
D9
:
D8
:
(a+b+c)
D7
:
(a+b)
D6
:
D5
::
D4D3
;
D2
:
D1
No = 0
Yes = 1
Significant number
(0 ~ 9)
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Subtotal = 0
Tender = 4
No = 0
Yes = 4
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
Significant number
(0 ~ 4)
59
Program 3
TE-2200/2400 Dealer's Manual
<FOOD STAMP TENDER>, <EBT>
<NEW BALANCE>
Description Choice Program code
Allowable number of validation printing (“0” means no limitation)
Force validation operation.
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Force batch slip printing.
Prohibit over tendering. (only for <EBT>)
Always “0”
Print VAT breakdown.
Validation amount
1 Print subtotal amount 2 Print amount tendered
Always “0”
High amount limit specification for subtotal and tendering amounts.
Always “00”
a
b
c
a
b
a
b
:
D11
:
D10
:
(a+b+c)
D9
:
(a+b)
D8
;
D7
:
(a+b)
D6
;
D5
::
D4D3
;;
D2D1
Significant number
(0 ~ 9)
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 4
No = 0
Yes = 1
Subtotal = 0
Tender = 4
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
Description Choice Program code
Allowable number of validation printing (“0” means no limitation)
Force validation operation.
Cancel the transaction if no item is registered.
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Force batch slip printing.
Open drawer when the key is pressed.
No receipt is issued.
Function after normal (not in check tracking) registration:
Operation error = 0, Auto Cash = 1, New balance = 2
Print VAT breakdown.
Service charge
1 Use an amount 2 Use a rate
Always “00000”
a
b
a
b
c
a
b
c
a
b
:
D11
:
(a+b)
D10
:
(a+b+c)
D9
:
(a+b)
D8
:
D7
:
(a+b)
D6
;;;;;
D5D4D3D2D1
Significant number
(0 ~ 9)
No = 0
Yes = 1
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
No = 0
Yes = 1
Amount = 0
Rate = 2
60
Key function/machine feature (P3)
<CHARACTER RECALL>, <CHARACTER PRINT>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Disable to change mode switch after registration.
(only effective for <character recall>)
Print characters on receipt, guest receipt, or slip.
Always “0000”
Always “00”
a
b
c
a
b
:
(a+b+c)
D9
;
D8
:
(a+b)
D7
;;;;
D6 D5 D4 D3
;;
D2 D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Yes = 0
No = 2
<TIP>
Description Choice Program code
Multiple validation
(If “No”, only one validation printing is possible.)
Always “0”
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00000”
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry)
Always “00”
a
b
c
:
D11
;
D10
:
(a+b+c)
D9
;;;;;
D8D7D6D5D4
:
D3
;;
D2D1
Yes = 0
No = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
61
Program 3
TE-2200/2400 Dealer's Manual
<LOAN>, <PICK UP>
<RECEIVED ON ACCOUNT>, <PAID OUT>
Description Choice Program code
Restriction (to 0, 5) on last digit for amount tendered.
Allowable number of validation printing (“0” means no limitation)
Force validation operation. (only effective after receipt issuance)
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0000”
High amount limit specification for entering amounts
Always “00”
a
b
c
:
D12
:
D11
:
D10
:
(a+b+c)
D9
;;;;
D8D7D6D5
::
D4D3
;;
D2D1
No = 0
Yes = 1
Significant number
(0 ~ 9)
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
Description Choice Program code
Allowable number of validation printing (“0” means no limitation)
Force validation operation.
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0000”
High amount limit specification for entering amounts
Always “00”
These programmable options are not effective for the Euro function.
a
b
c
:
D11
:
D10
:
(a+b+c)
D9
;;;;
D8D7D6D5
::
D4D3
;;
D2D1
Significant number
(0 ~ 9)
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
62
Key function/machine feature (P3)
<+ (PLUS)>, <- (MINUS)>, <COUPON>
Taxable status
for the U.S./Singapore
Food stamp (for Singapore, always “0”)
Taxable 1 status
Taxable 2 status
Taxable 3 status
for Canada
Donuts status (D8D7=”99” means donuts and all taxable.)
Non tax = 0 Taxable 3 = 3 Taxable 1 & 3 = 6
Taxable 1 = 1 Taxable 4 = 4 Taxable 1 & 4 = 7
Taxable 2 = 2 Taxable 1 & 2 = 5
for Other area
Non tax = 0 Taxable 4 = 4 Taxable 8 = 8
Taxable 1 = 1 Taxable 5 = 5 Taxable 9 = 9
Taxable 2 = 2 Taxable 6 = 6 Taxable 10 = 10
Taxable 3 = 3 Taxable 7 = 7 All taxable = 99
a
b
c
:
D8
:
(a+b+c)
D7
:
D8
:
D7
::
D8D7
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Significant
number
Significant
numbers
Description Choice Program code
Multiple validation (If “No”, only one validation printing is possible.)
Always “0”
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Taxable status:
See below.
Allow credit balance. (–, CPN only)
Always “0”
Allow key operation after <SUBTOTAL>.
Allow key operation after item registration.
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry.)
Commission 1
Commission 2
Prepared tax status (Canadian tax)
Always “0”
a
b
c
a
b
a
b
c
:
D11
;
D10
:
(a+b+c)
D9
::
D8D7
:
D6
;
D5
:
(a+b)
D4
:
D3
:
(a+b+c)
D2
;
D1
Yes = 0
No = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Yes = 0
No = 1
Yes = 0
No = 4
Significant
number
No = 0
Yes = 1
No = 0
Yes = 2
Yes = 0
No = 4
63
Program 3
TE-2200/2400 Dealer's Manual
<DEPOSIT>
Description Choice Program code
Restriction (to 0, 5) on last digit for amount tendered.
Always “0”
Force validation operation.
(only effective after receipt issuance)
Multiple validation (If “No,” only one validation is possible.)
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Key attribution
Open cash drawer.
Media definition:
Cash = 0, Charge = 1, Check = 2,
Credit 1 = 3, Credit 2 = 4, Credit 3 = 5, Credit 4 = 6
High amount limit specification for entering amounts
Always “00”
a
b
a
b
c
:
D12
;
D11
:
(a+b)
D10
:
(a+b+c)
D9
;
D8
:
D7
:
D6
:
D5
::
D4D3
;;
D2D1
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
DEPO+ = 0
DEPO– = 1
No = 0
Yes = 2
Significant
number
Maximum value
(0 ~ 9)
Number of zeros
(0 ~ 9)
64
Key function/machine feature (P3)
<PREVIOUS BALANCE>
Taxable status
for the U.S./Singapore
Food stamp (for Singapore, always “0”)
Taxable 1 status
Taxable 2 status
Taxable 3 status
for Canada
Donuts status (D8D7=”99” means donuts and all taxable.)
Non tax = 0 Taxable 3 = 3 Taxable 1 & 3 = 6
Taxable 1 = 1 Taxable 4 = 4 Taxable 1 & 4 = 7
Taxable 2 = 2 Taxable 1 & 2 = 5
for Other area
Non tax = 0 Taxable 4 = 4 Taxable 8 = 8
Taxable 1 = 1 Taxable 5 = 5 Taxable 9 = 9
Taxable 2 = 2 Taxable 6 = 6 Taxable 10 = 10
Taxable 3 = 3 Taxable 7 = 7 All taxable = 99
a
b
c
:
D8
:
(a+b+c)
D7
:
D8
:
D7
::
D8D7
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Significant
number
Significant
numbers
Description Choice Program code
Multiple validation (If “No”, only one validation printing is possible.)
Always “0”
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Taxable status:
See below.
Key attribution
Print when registered.
Always “00”
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry.)
Prepared tax status (Canadian tax)
Always “0”
a
b
c
a
b
:
D11
;
D10
:
(a+b+c)
D9
::
D8D7
:
(a+b)
D6
;;
D5D4
:
D3
:
D2
;
D1
Yes = 0
No = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
PB+ = 0
PB– = 1
Yes = 0
No = 4
Significant
number
Yes = 0
No = 4
65
Program 3
TE-2200/2400 Dealer's Manual
<PREMIUM (%+)>, <DISCOUNT (%-)>
Taxable status
for the U.S./Singapore
Food stamp (for Singapore, always “0”)
Taxable 1 status
Taxable 2 status
Taxable 3 status
for Canada
Donuts status (D8D7=”99” means donuts and all taxable.)
Non tax = 0 Taxable 3 = 3 Taxable 1 & 3 = 6
Taxable 1 = 1 Taxable 4 = 4 Taxable 1 & 4 = 7
Taxable 2 = 2 Taxable 1 & 2 = 5
for Other area
Non tax = 0 Taxable 4 = 4 Taxable 8 = 8
Taxable 1 = 1 Taxable 5 = 5 Taxable 9 = 9
Taxable 2 = 2 Taxable 6 = 6 Taxable 10 = 10
Taxable 3 = 3 Taxable 7 = 7 All taxable = 99
a
b
c
:
D8
:
(a+b+c)
D7
:
D8
:
D7
::
D8D7
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Significant
number
Significant
numbers
Description Choice Program code
Multiple validation
(If “No”, only one validation printing is possible.)
Always “0”
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Taxable status:
See below.
Prohibit manual rate override.
Rounding:
Round off = 0, cut off = 1, round up = 2
Allow key operation after <SUBTOTAL>.
Allow key operation after item registration.
Always “0”
Commission 1
Commission 2
Prepared tax status (Canadian tax)
Always “0”
a
b
c
a
b
a
b
c
:
D11
;
D10
:
(a+b+c)
D9
::
D8D7
:
D6
:
D5
:
(a+b)
D4
;
D3
:
(a+b+c)
D2
;
D1
Yes = 0
No = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 2
Significant
number
Yes = 0
No = 1
Yes = 0
No = 4
No = 0
Yes = 1
No = 0
Yes = 2
Yes = 0
No = 4
66
Key function/machine feature (P3)
<RATE TAX>
<MANUAL TAX>
<ERROR CORRECTION/CANCEL>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00”
Prohibit manual entry.
Rounding:
Round off = 0, cut off = 1, round up = 2
Always “0000”
a
b
c
:
(a+b+c)
D9
;;
D8D7
:
D6
:
D5
;;;;
D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 2
Significant
number
Description Choice Program code
Multiple validation
(If “No”, only one validation printing is possible.)
Always “0”
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00000”
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry.)
Always “00”
a
b
c
:
D11
;
D10
:
(a+b+c)
D9
;;;;;
D8D7D6D5D4
:
D3
;;
D2D1
Yes = 0
No = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0000000”
A range of cancellation:
1 Complete cancellation/2 Current receipt only
These programmable options are not effective for error correction function.
a
b
c
:
(a+b+c)
D9
;;;;;;;
D8D7D6D5D4D3D2
:
D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
2 = 0
1 = 1
67
Program 3
TE-2200/2400 Dealer's Manual
<VOID>
<RECEIPT>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0000000”
A range of item correction:
1 From the beginning of this transaction
2 Current receipt only
Affect stock quantity
a
b
c
a
b
:
(a+b+c)
D9
;;;;;;;
D8D7D6D5D4D3D2
:
(a+b)
D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
2 = 0
1 = 1
Yes = 0
No = 2
Description Choice Program code
Maximum number of post receipts (0 ~ 9)
(“0” means 1 post receipt.)
Always “00”
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Print current time on guest receipt.
Clear finalized check.
Always “0”
Print journal when receipt is issued by <RECEIPT>.
Receipt is issued by:
•“Receipt 1 (printer connection table)” = 0
•“Receipt 2 (printer connection table)” = 1
•“Receipt 3 (printer connection table)” = 2
Line number of guest bottom message (00 ~ 10):
(“00” means no bottom message.)
a
b
c
:
D12
;;
D11 D10
:
(a+b+c)
D9
;
D8
:
D7
:
D6
;
D5
:
D4
:
D3
::
D2D1
Significant
number
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 4
Yes = 0
No = 1
No = 0
Yes = 1
Significant
number
Significant
numbers
68
Key function/machine feature (P3)
<CHECK ENDORSEMENT>
<NON ADD (#)>, <NON ADD (#)/NO SALE>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Line number of auto-back feed before printing (0 ~ 9)
Always “000000”
a
b
c
:
(a+b+c)
D9
;
D8
:
D7
;;;;;;
D6D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Allow mode change or clerk change after non-add registration as first transaction.
(only for non-add function)
Always “0000”
Always “00”
a
b
c
:
(a+b+c)
D9
;
D8
:
D7
;;;;
D6 D5 D4 D3
;;
D2 D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Yes = 0
No = 1
69
Program 3
TE-2200/2400 Dealer's Manual
<CUSTOMER>
<ARRANGEMENT>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Input method:
Allow replacement = 0, Prohibit replacement = 1, Add enter value = 2
Always “000000”
a
b
c
:
(a+b+c)
D9
;
D8
:
D7
;;;;;;
D6D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Description Choice Program code
Secret code (0000 ~ 9999)
Enable operation in X1 mode.
Enable operation in Z1 mode.
Enable operation in X2/Z2 mode.
Enable operation in RF/REG– mode.
Enable operation in REG2 mode.
Enable operation in REG1 mode.
Always “0”
Treat numeric entry as arrange table number
Arrangement table link number
a
b
c
a
b
c
::::
D14 D13 D12 D11
:
(a+b+c)
D10
:
(a+b+c)
D9
;
D8
:
D7
::::::
D6D5D4D3D2D1
Significant
numbers
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
No = 0
Yes = 1
Significant
numbers
70
Key function/machine feature (P3)
<CURRENCY EXCHANGE>
<BILL>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Define amount symbol. (0, 1 ~ 4)
(“0” means local currency symbol.)
Define foreign currency totalizer. (0, 1 ~ 4)
(“0” treats as “1”.)
Rounding:
Round off = 0, cut off = 1, round up = 2
Always “0”
Monetary mode (0 ~ 9):
º00 = 2, º0 = 1, 0 = 0, º000 = 3
Monetary symbol for decimal
Monetary symbol for separator
Assigning drawer number: 0 ~ 2
(“0” means drawer 1.)
a
b
c
:
(a+b+c)
D9
;
D8
:
D7
:
D6
:
D5
;
D4
:
D3
:
(a+b)
D2
:
D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Significant
number
Significant
number
Significant
number
Decimal = 0
Comma = 1
Comma = 0
Decimal = 4
Significant
number (0 ~ 2)
a
b
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00000”
Receipt is issued by:
•“Receipt 1 (printer connection table)” = 0
•“Receipt 2 (printer connection table)” = 1
•“Receipt 3 (printer connection table)” = 2
Always “00”
a
b
c
:
(a+b+c)
D9
;;;;;
D8D7D6D5D4
:
D3
;;
D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
71
Program 3
TE-2200/2400 Dealer's Manual
<SLIP>
<TAX SHIFT>, <TAXABLE SUBTOTAL>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Force slip batch printing from the beginning of the transaction.
If “No”, controlled by general function.)
Print issuing time
(only effective when slip is printed from the beginning of the transaction).
Clear finalized check.
Always “0”
Print journal when slip is printed.
Always “000”
a
b
c
a
b
:
(a+b+c)
D9
;
D8
:
(a+b)
D7
:
D6
;
D5
:
D4
;;;
D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 4
Yes = 0
No = 1
No = 0
Yes = 1
Description Choice Program code
Maintain of tax shift:
1 Do not maintain.
2 Until next tax shift specification.
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Taxable status (00, 01 ~ 10)
(“00” means taxable 1.)
Always “000000”
a
b
c
:
D7
:
(a+b+c)
D9
::
D8D7
;;;;;;
D6D5D4D3D2D1
1 = 0
2 = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
numbers
72
Key function/machine feature (P3)
<EXEMPT>
<MENU>
<OPEN>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
• U.S., Singapore:
Exempt tax 1
Exempt tax 2
Exempt tax 3
• Canada:
Not exempt donuts tax = 0
Exempt donuts tax 1 = 1
Exempt all (tax 1 ~ 4) = 0
Exempt tax 1 = 1, Exempt tax 2 = 2, Exempt tax 3 = 3,
Exempt tax 4 = 4, Exempt tax 1 & 2 = 5,
Exempt tax 1 & 3 = 6, Exempt tax 1 & 4 = 7
• Other area
Exempt all (tax 1 ~ 10) = 00
Exempt tax 1 = 01, Exempt tax 2 = 02, Exempt tax 3 = 03,
Exempt tax 4 = 04, Exempt tax 5 = 05, Exempt tax 6 = 06,
Exempt tax 7 = 07, Exempt tax 8 = 08, Exempt tax 9 = 09,
Exempt tax 10 = 10
Exempt add-in tax from subtotal amount.
Always “00000”
a
b
c
:
(a+b+c)
D9
;
D8
:
(a+b+c)
D7
:
D8
:
D7
::
D8D7
:
D6
;;;;;
D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Significant
number
Significant
number
Significant
numbers
No = 0
Yes = 1
a
b
c
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Define assigning menu sheet number. (0, 1 ~ 6)
(If you set “0”, menu sheets are assigned one by one.)
Always “000000”
a
b
c
:
(a+b+c)
D9
;
D8
:
D7
;;;;;;
D6D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Release “High amount limit.”
Always “000000”
a
b
c
:
(a+b+c)
D9
;
D8
:
D7
;;;;;;
D6D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
73
Program 3
TE-2200/2400 Dealer's Manual
<OPEN2>
<PRICE SHIFT>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Release customer number compulsory.
Release table number compulsory.
Release check number compulsory.
Release credit balance error.
(If “Yes,” you can finalize the transaction even if the subtotal is negative.)
Release tax calculation compulsory before finalizing.
Release guest receipt compulsory.
Release validation compulsory.
Release check endorsement compulsory.
Release check print compulsory.
Release slip auto batch print compulsory. (programmed by clerk)
Release slip manual batch print compulsory. (programmed by finalize key)
Release condiment compulsory.
Release eat-in/takeout compulsory.
Always “0”
a
b
c
a
b
c
a
b
c
a
b
c
a
b
:
(a+b+c)
D9
;
D8
:
(a+b+c)
D7
:
(a+b+c)
D6
:
(a+b+c)
D5
:
(a+b)
D4
:
D3
:
D2
;
D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Define assigning price shift number. (0, 1 ~ 3)
(If you set “0”, price shift numbers are assigned one by one.)
Always “000000”
a
b
c
:
(a+b+c)
D9
;
D8
:
D7
;;;;;;
D6D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
74
Key function/machine feature (P3)
<REVIEW>
<CLERK NUMBER>
<OPERATOR X/Z>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
The reviewed range of item:
1 From the beginning of this transaction
2 Current receipt only
Display “Check number”, “Table number”, and “Customer number”.
Always “0000000”
a
b
c
:
(a+b+c)
D9
:
(a+b)
D8
;;;;;;;
D7D6D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
2 = 0
1 = 1
No = 0
Yes = 2
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Issue consolidation report./Issue stand-alone report.
Always “000000”
a
b
c
:
(a+b+c)
D9
;
D8
:
D7
;;;;;;
D6D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Standalone = 0
Consolidation = 1
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0000”
Clerk secret number (0000 ~ 9999)
(“0000” means no secret number.)
a
b
c
:
(a+b+c)
D9
;;;;
D8D7D6D5
::::
D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
numbers
75
Program 3
TE-2200/2400 Dealer's Manual
<TRAY TOTAL>
<SUBTOTAL>, <MERCHANDISE SUBTOTAL>
Description Choice Program code
Allowable number of validation printing
(“0” means no limitation)
Force validation operation
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00”
Include add-on tax.
Print tray total when <TRAY TOTAL> is pressed.
Always “00000”
a
b
c
a
b
:
D11
:
D10
:
(a+b+c)
D9
;;
D8D7
:
(a+b)
D6
;;;;;
D5D4D3D2D1
Significant number
(0 ~9)
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Yes = 0
No = 1
No = 0
Yes = 4
Description Choice Program code
Multiple validation
(If “No”, only one validation printing is possible.)
Always “0”
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00”
Include add-on tax. (<SUBTOTAL> only)
Print when key is pressed.
Always “00000”
a
b
c
a
b
:
D11
:
D10
:
(a+b+c)
D9
;;
D8D7
:
(a+b)
D6
;;;;;
D5D4D3D2D1
Yes = 0
No = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Yes = 0
No = 1
No = 0
Yes = 4
76
Key function/machine feature (P3)
<NEW CHECK>, <NEW/OLD CHECK>
<MULTIPLICATION>, <QUANTITY/FOR>, <SQUARE>, <CUBE>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00”
Multiplication procedure: (<KETTEN BON> and <X> only)
1 Quantity × Amount, 2 Amount × Quantity
Rounding:
Round off = 0, cut off = 1, round up = 2
Always “0000”
a
b
c
:
(a+b+c)
D9
;;
D8D7
:
D6
:
D5
;;;;
D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
1 = 0
2 = 1
Significant
number
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0”
Enable auto check assignment
Always “000000”
a
b
c
:
(a+b+c)
D9
;
D8
:
D7
;;;;;;
D6D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
77
Program 3
TE-2200/2400 Dealer's Manual
<PRICE CHANGE>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00000”
High digit limitation (HDL) for manually entered unit price
(“9” means NOT allow manual entry.)
Always “0”
Prohibit to change price greater than the preset price.
Prohibit to change price less than the preset price.
a
b
c
a
b
:
(a+b+c)
D9
;;;;;
D8D7D6D5D4
:
D3
;
D2
:
(a+b)
D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
No = 0
Yes = 1
No = 0
Yes = 2
<CLOCK-IN/OUT>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00”
High digit limitation (00 ~ 10), “00” means no limitation.
Always “00”
Usage:Both CLOCK-IN and CLOCK-OUT = 0,
CLOCK-IN only = 1, CLOCK-OUT only = 2
Issue receipt during CLOCK-IN/OUT.
a
b
c
:
(a+b+c)
D9
;;
D8D7
::
D6D5
;;
D4D3
:
D2
:
D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
numbers
Significant
number
Yes = 0
No = 1
78
Key function/machine feature (P3)
<EAT-IN>, <TAKEOUT>
<ONE TOUCH NLU>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
• U.S., Singapore:
Exempt tax 1
Exempt tax 2
Exempt tax 3
• Canada:
Not exempt donuts tax = 0
Exempt donuts tax 1 = 1
Exempt all (tax 1 ~ 4) = 0
Exempt tax 1 = 1, Exempt tax 2 = 2, Exempt tax 3 = 3,
Exempt tax 4 = 4, Exempt tax 1 & 2 = 5,
Exempt tax 1 & 3 = 6, Exempt tax 1 & 4 = 7
• Other area
Exempt all (tax 1 ~ 10) = 00
Exempt tax 1 = 01, Exempt tax 2 = 02, Exempt tax 3 = 03,
Exempt tax 4 = 04, Exempt tax 5 = 05, Exempt tax 6 = 06,
Exempt tax 7 = 07, Exempt tax 8 = 08, Exempt tax 9 = 09,
Exempt tax 10 = 10
Subtract add-in tax from subtotal amount.
(only subtracted when the tax is exempted.)
Print when the key is pressed.
Always “0”
Change tax status to: (only effective for VAT)
VAT 1 = 01, VAT 2 = 02, VAT 3 = 03, VAT 4 = 04, VAT 5 = 05,
VAT 6 = 06, VAT 7 = 07, VAT 8 = 08, VAT 9 = 09, VAT 10 = 10
(“00”: No change is made.)
Always “00”
a
b
c
:
(a+b+c)
D9
;
D8
:
(a+b+c)
D7
:
D8
:
D7
::
D8D7
:
(a+b)
D6
;
D5
::
D4D3
;;
D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Significant
number
Significant
number
Significant
numbers
No = 0
Yes = 1
No = 0
Yes = 4
Significant
numbers
a
b
c
a
b
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00000”
Linked one touch NLU record number (000 ~ 999)
a
b
c
:
(a+b+c)
D9
;;;;;
D8D7D6D5D4
:::
D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
numbers
79
Program 3
TE-2200/2400 Dealer's Manual
<CANCEL>
<VALIDATION>
<PRICE INQUIRY>, <STOCK INQUIRY>, <CHECK PRINT>, <REFUND>, <COUPON2>,
<NO SALE>, <VAT>, <PLU>, <PRICE>, <BOTTLE RETURN>,
<SLIP BACKFEED/RELEASE>, <SLIP FEED/RELEASE>, <TABLE NUMBER>,
<FOOD STAMP SHIFT>, <RED PRICE>, <DECLARATION>, <RECEIPT ON/OFF>,
<PREVIOUS BALANCE SUBTOTAL>, <FOOD STAMP SUBTOTAL>, <OLD CHECK>,
<ADD CHECK>, <SEPARATE CHECK>, <OBR>, <OPEN CHECK>, <MEDIA CHANGE>, <STORE>,
<RECALL>
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “0000000”
A range of item correction:
1From the beginning of this transaction
2Current receipt only
a
b
c
:
(a+b+c)
D9
;;;;;;;
D8D7D6D5D4D3D2
:
D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
2 = 0
1 = 1
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00”
Print total validation to:
Slip (paper is inserted in slip printer) or R/J = 0, Slip only = 1, R/J only = 2
Number of copies by slip validation (0 ~ 9)
(“0” means 1 copy.)
Number of auto feed lines between slip validation printing (00 ~ 99)
Number of line feeds before slip validation (00 ~ 99)
a
b
c
:
(a+b+c)
D9
;;
D8D7
:
D6
:
D5
::
D4D3
::
D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
Significant
number
Significant
numbers
Significant
numbers
Description Choice Program code
Disable operation in RF/REG– mode.
Disable operation in REG2 mode.
Disable operation in REG1 mode.
Always “00000000”
a
b
c
:
(a+b+c)
D9
;;;;;;;;
D8D7D6D5D4D3D2D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
80
Key function/machine feature (P3)
Clerk program
Secret number, drawer, check number programming
Programming procedure
Data
Clerk detail link programming
Programming procedure
Description Choice Program code
Check number for clerk interrupt
Assigning drawer number: 00 ~ 02
("00" means drawer 1.)
Clerk secret number
::::::
D12 D11 D10 D9D8D7
::
D6D5
::::
D4D3D2D1
Significant
numbers
Significant
numbers
Significant
numbers
63s6::07s6:: :: 6a6s
PGM
Mode switch
To a new (not sequential) clerk
D12 D11 ~D
2D1
Record No.
To the next clerk
~
63s6::30s66 B6s
6B66
6:::: ::a6
+
a
B
PGM
Mode
switch
To a new (not sequential) total
Record No.
To the next total
Department
Transaction
Flat-PLU
Scanning
Scanning code
PLU No.
Record No. * File No.
*File No.
Fixed totalizer: 01
Transaction key: 02
PLU: 04
Department: 05
Group: 06
PRICE
SHIFT
MENU
OBR
}
{
}
{
81
Program 3
TE-2200/2400 Dealer's Manual
Clerk other programming
Programming procedure (individual)
Program data
Address code 67 (Clerk control)
Programming procedure (by range)
Description Choice Program code
Check number compulsory
Table number compulsory
Number of customer compulsory
Guest receipt compulsory (at finalization)
Guest receipt compulsory (at new balance)
Slip auto-batch print compulsory (at finalization)
Slip auto-batch print compulsory (at new balance)
Clerk attribution:
Cashier = 0, Clerk = 1, Manager = 2
Training clerk
Affect stock quantity even if assigning a training clerk
Enable to open clerk created by other clerk
Disable to sign on
Sign off at finalization (secret number only)
Always “0”
Compulsory Eat-in/Takeout operation
Always “00”
a
b
c
a
b
c
a
b
a
b
c
:
D10
:
(a+b+c)
D9
:
(a+b+c)
D8
:
D7
:
(a+b)
D6
:
(a+b+c)
D5
;
D4
:
D3
;;
D2D1
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
No = 0
Yes = 1
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 2
63s6::07s6::s6::a6s
PGM
Mode switch
To a new (not sequential) clerk
Record No. Address code Program data
To the next clerk
~
Program dataStart rec-# End rec-#
63s699000007s6::s6
6::6a6::6a6::a6s
Address code
Starts “0001”. Ends “the last record”.
PGM
Mode switch
~~~
82
Key function/machine feature (P3)
Address code 68 (Commission rate)
Address code 69 (Table number range)
Address code 70 (Mode control)
Description Choice Program code
Commission rate 1 (integer: 00 ~ 99)
Commission rate 1 (decimal: 00 ~ 99)
Commission rate 2 (integer: 00 ~ 99)
Commission rate 2 (decimal: 00 ~ 99)
::
D8D7
::
D6D5
::
D4D3
::
D2D1
Significant
numbers
Significant
numbers
Significant
numbers
Significant
numbers
Description Choice Program code
Minimum range for table range (1 ~ 999999)
(“0” means no programming.)
Maximum range for table range (1 ~ 999999)
(“0” means no programming.)
::::::
D12 D11 D10 D9D8D7
::::::
D6D5D4D3D2D1
Significant
numbers
Significant
numbers
Description Choice Program code
Disable to operate in PGM mode.
Disable to operate in RF/REG– mode.
Disable to operate in REG1 mode.
Disable to operate in REG2 mode.
Disable to operate in X1 mode.
Disable to operate in Z1 mode.
Disable to operate in X2/Z2 mode.
Always “0”
Enable to finalize a transaction if the clerk is assigned by clerk key.
Enable to finalize a transaction if the clerk is assigned by clerk code/switch.
Skip programming fields of batch/direct PLU maintenance file in
accordance with the general function program (address code 32, 33).
Enable to issue individual key reset report.
Enable to issue read/reset report by file.
Enable to issue batch read/reset report.
Enable to issue operator reset report.
Default menu sheet number (0 ~ 6) after signing on.
Enable to use 1st menu sheet.
Enable to use 2nd menu sheet.
Enable to use 3rd menu sheet.
Enable to use 4th menu sheet.
Enable to use 5th menu sheet.
Enable to use 6th menu sheet.
a
b
c
a
b
c
a
b
a
b
a
b
c
a
b
c
a
b
c
:
(a+b+c)
D10
:
(a+b+c)
D9
:
D8
;
D7
:
(a+b)
D6
:
(a+b)
D5
:
(a+b+c)
D4
:
D3
:
(a+b+c)
D2
:
(a+b+c)
D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 1
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Significant
number
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 0
No = 4
83
Program 3
TE-2200/2400 Dealer's Manual
Other programs
Time range programming
Programming procedure
Program data
Table range programming
Programming procedure
Program data
Description Choice Program code
Start time (hour: 00 ~ 23)
Start time (minute: 00 ~ 59)
End time (hour: 00 ~ 23)
End time (minute: 00 ~ 59)
::
D8D7
::
D6D5
::
D4D3
::
D2D1
Significant
numbers
Significant
numbers
Significant
numbers
Significant
numbers
Description Choice Program code
Minimum check number (000000 ~ 999999)
(“0” means “000001.”)
Maximum check number (000000 ~ 999999)
(“0” means no programming.)
::::::
D12 D11 D10 D9D8D7
::::::
D6D5D4D3D2D1
Significant
numbers
Significant
numbers
PGM
Mode switch
To a new (not sequential) record
Record No.
To the next record
Program data
63s6::09s6::6a6s
~
63s6:: 18s6::6a6s
PGM
Mode switch
To a new (not sequential) record
Record No.
To the next record
Program data
~
84
Key function/machine feature (P3)
Tax table programming
Programming procedure
8
3s
8
::::s
8
::^::::a
8
::::a
8
::::a
8
::::a
8
::::a
8
::::a
8
::::a
8
s
(for the U.S., Singapore)
Tax table 1 = 0125
Tax table 2 = 0225
Tax table 3 = 0325
(for Canada)
Tax table 1 = 0125
Tax table 2 = 0225
Tax table 3 = 0325
Tax table 4 = 0425
{
(for other area)
Tax table 1 = 0125
Tax table 2 = 0225
:= :
Tax table 10 = 1025
{{
Tax rate (4-digit for integer + 4-digit for decimal)
Tax table maximum value (“0” means unlimited).
Rounding/tax table system code *1
Sum of a cyclic pattern
Number of values in each cyclic pattern
Sum of values in each non-cyclic pattern
Actual value of difference of the non-cyclic and cyclic values
You must enter these values in 4-digit block. If the last block
comes out to be only two digits, add two zeros.
Loop to input the next block.
Canadian tax system
For both add-on and add-in tax systems.
To program Tax-on-tax system, you must use the tax address “0225”, “0325” or “0425.”
To program Donuts tax system, you must use the tax address “0125” or “0225.”
Tax system code specification
D2D1Rounding
4--Singapore rounding
-- 1 Tax table only
-- 2 U.S. tax table with tax rate or add-on tax only
-- 3 Add-in tax rate
-- 4 Tax-on-tax (Canada, Singapore)
-- 6 VAT-on-tax (Thailand)
-- 7 VAT & VAT_2
D4D3D2D1
*1 Rounding/Tax system code
Rounding code specification
D4D3Rounding
50Rounding off two decimal places
90Rounding up to two decimal places
00Cut off two decimal places
PGM
Mode switch
85
Program 3
TE-2200/2400 Dealer's Manual
Example 1:
Add-on rate tax
3s
8
::::s
8
8^25a
8
0a
8
5002a
8
s
Tax rate (2-digit for integer + 4-digit for decimal) ............................... 8.25%
Tax table maximum value ("0" means unlimited). ............................... 0 (no limitation)
Rounding/tax table system code ........................................................... 5002 (Round off)
Sum of a cyclic pattern ......................................................................... 0
Number of values in each cyclic pattern............................................... 0
Number of values in each non-cyclic pattern ....................................... 0
Actual value of difference of the non-cyclic and cyclic values ............ 0
}
No need to enter.
PGM
Mode switch
Tax table No. (0125 ~ 1025)
Tax rate (2-digit for integer + 4-digit for decimal)
Tax table maximum value (“0” means unlimited).
Rounding/tax table system code
86
Key function/machine feature (P3)
Example 2:
U.S. tax table without rate setting
TAX Price range
(6%) Min. break point Max. break point
$ .00 $ .01 $ .10
.01 .11 .24
.02 .25 .41
.03 .42 .58
.04 .59 .74
.05 .75 .91
.06 .92 1.08
.07 1.09 1.24
.08 1.25 1.41
Max. break point
Upper Lower Difference Pattern
10 – 0 = 10
24 – 10 = 14 Non cyclic
41 – 24 = 17
58 – 41 = 17 Cyclic
74 – 58 = 16
91 – 74 = 17
108 – 91 = 17 Cyclic
124 – 108 = 16
141 – 124 = 17
17 Cyclic
Tax rate (2-digit for integer + 4-digit for decimal) ............................... 0 %(Table only)
Tax table maximum value (“0” means unlimited). ............................... 0 (Table only)
Rounding/tax table system code ........................................................... 01 (Table only)
Sum of a cyclic pattern ......................................................................... 50 (17+17+16)
Number of values in each cyclic pattern............................................... 3
Number of values in each non-cyclic pattern ....................................... 24 (10+14)
Actual value of difference of the non-cyclic and cyclic values ............ 10, 14, 17, 17, 16
3s
8
::::s
8
0a
8
0a
8
01a
8
50a
8
3a
8
24a
8
1014a
8
1717a
8
1600a
8
s
Tax table No. (0125 ~ 0325)
Tax rate (2-digit for integer + 4-digit for decimal)
Tax table maximum value (“0” means unlimited).
Rounding/tax table system code
Sum of a cyclic pattern
Number of values in each cyclic pattern
Sum of values in each non-cyclic pattern
Actual value of difference of the non-cyclic and cyclic values.
You must enter these values in 4-digit block. If the last block
comes out to be only two digits, add two zeros.
PGM
Mode switch
87
Program 3
TE-2200/2400 Dealer's Manual
Example 3:
U.S. tax table with rate setting
TAX Price range
(7%) Min. break point Max. break point
$ .00 $ .01 $ .07
.01 .08 .21
.02 .22 .35
.03 .36 .49
.04 .50 .64
.05 .65 .78
.06 .79 .92
.07 .93 1.07
.08 1.08 1.21
.09 1.22 1.35
.10 1.36 1.49
.11 1.50 1.64
.12 1.65 1.78
.13 1.79 1.92
.14 1.93 2.07
1.40 19.93 20.07
One all sales above $20.07, compute the tax
at the rate of 7%.
Max. break point
Upper Lower Difference Pattern
7– 0= 7 Non-cyclic
21 – 7 = 14
35 – 21 = 14
49 – 35 = 14
64 – 49 = 15 Cyclic
78 – 64 = 14
92 – 78 = 14
107 – 92 = 15
121 – 107 = 14
135 – 121 = 14
149 – 135 = 14
164 – 149 = 15 Cyclic
178 – 164 = 14
192 – 178 = 14
207 – 192 = 15
Tax rate (2-digit for integer + 4-digit for decimal) ............................... 7 %
Tax table maximum value (“0” means unlimited). ............................... 2007
Rounding/tax table system code ........................................................... 0002 (Cut off & table + rate)
Sum of a cyclic pattern ......................................................................... 100 (14+14+14+15+14+14+15)
Number of values in each cyclic pattern............................................... 7
Number of values in each non-cyclic pattern ....................................... 7
Actual value of difference of the non-cyclic and cyclic values ............ 14, 14, 14, 15, 14, 14, 15
3s
8
::::
s
8
7a
8
2007a
8
0002a
8
100a
8
7a
8
7a
8
0714a
8
1414a
8
1514a
8
1415a
8
s
Tax table No. (0125 ~ 0325)
Tax rate (2-digit for integer + 4-digit for decimal)
Tax table maximum value (“0” means unlimited).
Rounding/tax table system code
Sum of a cyclic pattern
Number of values in each cyclic pattern
Sum of values in each non-cyclic pattern
Actual value of difference of the non-cyclic and cyclic values.
You must enter these values in 4-digit block. If the last block
comes out to be only two digits, add two zeros.
PGM
Mode switch
88
Key function/machine feature (P3)
Example 4:
Add-in rate tax
Example 5:
Singapore tax
Tax rate (2-digit for integer + 4-digit for decimal) ............................... 10.00 %
Rounding/tax table system code. .......................................................... 0003 (Cut off)
3s
8
::::s
8
10a
8
0a
8
0003a
8
s
Tax table No. (0125 ~ 0325)
Tax rate (2-digit for integer + 4-digit for decimal)
Always “0”
Rounding/tax table system code
PGM
Mode switch
Tax table 1 Tax table 2 Tax table 3
3s
8
0125s
8
1a
8
0a
8
5044a
8
s
3s
8
0225s
8
10a
8
0a
8
5044a
8
s
3s
8
0325s
8
3a
8
0a
8
5002a
8
s
Tax table 1 Country tax.............................................................. 1%
Round off/tax on tax................................................ 5044
Tax table 2 Service charge ......................................................... 10%
Round off/tax on tax................................................ 5044
Tax table 3 GST ......................................................................... 3%
Round off ................................................................ 5002
Tax rate
(4-digit for integer + 4-digit for decimal)
Always “0”
Rounding/tax table system code
PGM
Mode switch
89
Program 3
TE-2200/2400 Dealer's Manual
Set menu programming
Programming procedure
Batch X/Z report programming
Programming procedure
Program data
Control flag (1st field)
Report code (2nd ~ 11th field)
Description Choice Program code
Report code:
Fixed totalizer = 11, Transaction key = 12, PLU = 14, PLU by group = 24,
Department = 15, Group = 16, Clerk = 17, Time zone = 19, Monthly = 20,
Scanning PLU = 26, Table analysis = 28, Employee = 29, Mix & match = 61,
PLU stock = 64, PLU stock by group = 34
::
D2D1
Significant
numbers
63s6::28s6B6B6s
::6+
a
To a new (not sequential) record
Record No.
PLU code
To the next record
Maximum 15 items can be set.
Rec #: within 4 digits
Random code: within 6 digits
PGM
Mode switch
MENU
SHIFT
~
Flat-
PLU
}
{
63s6::29s6::6a6s
a
To a new (not sequential) record
Record No.
1st to 11th field
PGM
Mode switch
Program data
To the next record
~
Description Choice Program code
Save X data to CF card.
Save Z data to CF card.
Issue report, in case of saving data to CF card.
Always “0”
Disable operation in X1 mode.
Disable operation in Z1 mode.
Disable operation in X2/Z2 mode.
Report contents in the X2/Z2 mode:
• Read report of periodic total 1 = 0 • Reset report of periodic total 1 = 1
• Read report of periodic total 2 = 2 • Reset report of periodic total 2 = 3
a
b
c
a
b
c
:
(a+b+c)
D4
;
D3
:
(a+b+c)
D2
:
D1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
Significant
number
90
Key function/machine feature (P3)
Check print control programming
Programming procedure
Program data
Arrangement programming
Programming procedure
Description Choice Program code
Define printing data:
1: Printing amount, 2: Printing amount (double size),
3: Printing date, 4: Printing date (double size)
5: Check endorsement message 1st line, 6: Check endorsement message 2nd line,
7: Check endorsement message 3rd line, 8: Check endorsement message 4th line
Feed before printing.
Feed direction
Feed one line after printing. *
No. of feed lines before printing (0 ~ 9)
Printing offset digits (00 ~ 39)
* If you set “0” to this option, one line back feed is made automatically.
:
D5
:
(a+b+c)
D4
:
D3
::
D2D1
Significant
number
No = 0
Yes = 1
Normal = 0
Reverse = 2
No = 0
Yes = 4
Significant
number
Significant
numbers
a
b
c
63s6::38s6A6::a6
6::6A6s
*The same A should be pressed.
** Vacant record search: If you want to set an arrangement program to a new record, “vacant record search”
is possible. (enter 0000 instead of entering a record No.)
Record No.
(up to 4 digits)
PGM
Mode switch
Arrangement table No. (up to 6 digits)
Key operations
~~
~
*
*
**
63s6::41s6::6a6s
To a new (not sequential) record
Record No.
PGM
Mode switch
Program data
To the next record
~
91
Program 3
TE-2200/2400 Dealer's Manual
Mix & match programming
Programming procedure
Program data
Taxable status
for the U.S./Singapore
Food stamp (for Singapore, always “0”)
Taxable 1 status
Taxable 2 status
Taxable 3 status
for Canada
Donuts status (D8D7=”99” means donuts and all taxable.)
Non tax = 0 Taxable 3 = 3 Taxable 1 & 3 = 6
Taxable 1 = 1 Taxable 4 = 4 Taxable 1 & 4 = 7
Taxable 2 = 2 Taxable 1 & 2 = 5
for Other area
Non tax = 0 Taxable 4 = 4 Taxable 8 = 8
Taxable 1 = 1 Taxable 5 = 5 Taxable 9 = 9
Taxable 2 = 2 Taxable 6 = 6 Taxable 10 = 10
Taxable 3 = 3 Taxable 7 = 7 All taxable = 99
a
b
c
:
D6
:
(a+b+c)
D5
:
D6
:
D5
::
D6D5
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Significant
number
Significant
numbers
Description Choice Program code
• Amount (1st field)
Discount amount
• Flag (2nd field)
Taxable status (see below)
Always “0”
Mix & match type*:
Discount 1 = 0: Discount every required quantity
Discount 2 = 1: Discount once
Discount 3 = 2: Discount continuously
Mix & match required quantity
* Example: (item unit price = $3.00, required quantity = 3, discount amount = $0.50)
• Discount 1: $3.00, $3.00, $2.50, $3.00, $3.00, $2.50, $3.00, $3.00, $2.50 ...
• Discount 2: $3.00, $3.00, $2.50, $3.00, $3.00, $3.00, $3.00, $3.00, $3.00 ...
• Discount 3: $3.00, $3.00, $2.50, $2.50, $2.50, $2.50, $2.50, $2.50, $2.50 ...
::::::
D6D5D4D3D2D1
::
D6D5
;
D4
:
D3
::
D2D1
Significant
numbers
Significant
number
Significant
numbers
63s6::51s6
6::a6::a6s
a
To a new (not sequential) record
Record No.
PGM
Mode switch
Program data
(2nd field)
To the next record
Program data
(1st field)
~~
92
Key function/machine feature (P3)
Employee number programming
Programming procedure
Description Choice Program code
Employee number (0000000001 ~ 9999999999) :: ~::
D10 D9D2D1
Significant
numbers
63s6::61s6::6a6s
To a new (not sequential) record
Record No.
PGM
Mode switch
Program data
To the next record
~
Program data
93
Program 3
TE-2200/2400 Dealer's Manual
Scheduler programming
Programming procedure
Program data 1
Program data 2
Program data 3
Description Choice Program code
• Execute kind: Switch menu shift/price shift
Switch to: 1st menu sheet = 1, 2nd menu sheet = 2, 3rd menu sheet = 3,
4th menu sheet = 4, 5th menu sheet = 5, 6th menu sheet = 6, No change = 0
Switch to:
1st price = 1, 2nd price = 2, 3rd price = 3, No change = 0
• Execute kind: Arrangement
Arrangement table record No.
• Execute kind: Job command * Refer to the “Job command” table.
Job command No.
Always “00”
Always “0”
Job command parameter
:
D2
:
D1
::::::
D6D5D4D3D2D1
::::::
D14 D13 D12 D11 D10 D9
;;
D8D7
;
D6
:::::
D5D4D3D2D1
Significant
number
Significant
number
Significant
numbers
Significant
numbers
Significant
numbers
Description Choice Program code
Designate clerk by record number
(“00” means the first record.)
Scheduler type 1:
Execute one time = 0, Execute every day = 1, Execute every week = 2
Scheduler type 2:
Execute even if the cash register is in the OFF mode = 0,
Not execute if the cash register is in the OFF mode = 1
Execute kind:
Switch menu shift/price shift = 0, Arrangement = 1, Job command = 2
Wait until the drawer (compulsory drawer) is closed.
::
D6D5
:
D4
:
D3
:
D2
:
D1
Significant
numbers
Significant
number
Significant
number
Significant
number
Yes = 0
No = 1
Description Choice Program code
Execute year (00 ~ 99; means 2000 ~ 2099)
Execute month (01 ~ 12, “00” means no programming)
Execute day or execute day of a week:
Day (01 ~ 31 “00” means no programming)
(Day of a week; Sunday = 00, Monday = 01, Tuesday = 02, Wednesday = 03,
Thursday = 04, Friday = 05, Saturday = 06)
Execute hour (00 ~ 23)
Execute minute (00 ~ 59)
::
D10 D9
::
D8D7
::
D6D5
::
D4D3
::
D2D1
Significant
numbers
Significant
numbers
Significant
numbers
Significant
numbers
Significant
numbers
63s6::62s6::6a6
6::6a6::6a6s
To new record
Record No.
PGM
Mode switch
To the next record
Program data 2 Program data 3
Program data 1
~~
~
94
Key function/machine feature (P3)
Job command table
Description Job No. Group/terminal ID Parameter
Default menu sheet number after signing on. (D3 of address code 70 of clerk programming)
Disabled menu sheet number (D2D1 of address code 70 of clerk programming)
Switching to dual (Euro/local) currency system to Euro only system
Batch maintenance activation
Format CF card
Save programming data to CF card.
Load programming data from CF card.
Delete file in CF card.
c: Input default menu sheet number (0 ~ 6). (This automatically changes the D3 value of address 70 of clerk programming by job command.)
f: Program restrictive status of menu sheet 1 ~ 3. (This automatically changes the D2 value of address 70 of clerk programming by job command.)
g: Program restrictive status of menu sheet 4 ~ 6. (This automatically changes the D1 value of address 70 of clerk programming by job command.)
dd: Input the start record number of clerk.
ee: Input the end record number of clerk.
030770
030771
200107
074070
070270
070070
070020
070030
00
00
00
00
00
00
00
00
0cddee
fgddee
002002
000000
000000
000ppp
ppp:command code
000ppp
ppp:command code
000ppp
ppp:command code
95
Program 3
TE-2200/2400 Dealer's Manual
Bottle link table programming
Programming procedure
63s6
::
73s6
66 B6B6a6s
6+6
6
::::
04a6
PLU No.
To a new (not sequential) total
Record No.
PGM
Mode switch
To the next record
Record No. (4-digits)
Random code (6-digits)
MENU Flat-
PLU
96
Key function/machine feature (P3)
I/O parameter table programming
Programming procedure
Program data (Address 01: for COM 1 port)
Program data (Address 02: for COM 2 port)
Description Choice Program code
International character set number for external printer:
00: U.S.A., 01: France, 02: German, 03: U.K., 04: Denmark(1), 05: Sweden,
06: Italy, 07: Spain(1), 09: Norway, 10: Denmark(2)
International character set page number for external printer:
0000: Multilingual + Euro, 0002: Multilingual, 0003: Portuguese,
0004: Canadian French, 0005: Nordic
Always“0000”
External printer:
UP-360 = 00
Connected device:
PC/ECR direct connection = 00, MODEM = 30,
External printer (as external printer 1 in printer connection table) = 80,
External printer (as external printer 2 in printer connection table) = 81
Baud rate:
Refer to the baud rate/device table.
Always“0”
::
D16 D15
::::
D14 D13 D12 D11
;;;;
D10 D9D8D7
::
D6D5
::
D4D3
:
D2
;
D1
Significant
numbers
Significant
numbers
Significant
numbers
Significant
numbers
Significant
number
Description Choice Program code
International character set number for external/slip printer:
00: U.S.A., 01: France, 02: German, 03: U.K., 04: Denmark(1), 05: Sweden,
06: Italy, 07: Spain(1), 09: Norway, 10: Denmark(2)
International character set page number for external/slip printer:
For SP-1300:
0000: Multilingual + Euro, 0002: Multilingual, 0003: Portuguese,
0004: Canadian French, 0005: Nordic, 0006: Slavic, 0007: Cyrillic,
0008: Turkish, 0009: Windows code page
For UP-360:
0000: Multilingual + Euro, 0002: Multilingual, 0003: Portuguese,
0004: Canadian French, 0005: Nordic
Always“0000”
External printer/slip printer/scanner:
• External printer (D4D3 = 80, 81): UP-360 = 00
• Slip printer (D4D3 = 70): SP-1300 = 00
• Scanner (D4D3 = 20): HHS-15 = 00, Quick Scan 6000 = 01
Connected device:
Scanner = 20, Slip printer = 70,
External printer (as external printer 1 in printer connection table) = 80,
External printer (as external printer 2 in printer connection table) = 81
Baud rate:
Refer to the baud rate/device table.
Always“0”
::
D16 D15
::::
D14 D13 D12 D11
;;;;
D10 D9D8D7
::
D6D5
::
D4D3
:
D2
;
D1
Significant
numbers
Significant
numbers
Significant
numbers
Significant
numbers
Significant
number
63s6::98s6::6a6s
Note: Please perform the following procedure after this program.
1. Power off the register, and connect all peripheral devices to COM ports.
2. Power on all peripheral devices.
3. Flag clear the register.
To a new record
Record No.
PGM
Mode switch
Program data
To the next record
~
97
Program 3
TE-2200/2400 Dealer's Manual
Reference (Baud rate/device table)
Printer connection table programming
Programming procedure
Program data
Device Default baud rate Other selection
Scanner (HHS-15) 2400bps (D2 = 0) 9600bps (D2 = 2) 4800bps (D2 = 3)
Scanner (Quick Scan 6000) 9600bps (D2 = 0) 4800bps (D2 = 3) 2400bps (D2 = 4)
External printer (UP-360) 9600bps (D2 = 0) 19200bps (D2 = 1)
Slip printer (SP-1300) 9600bps (D2 = 0) None
MODEM 19200bps (D2 = 0) 9600bps (D2 = 2) 4800bps (D2 = 3)
PC/ECR direct connection 19200bps (D2 = 0) None
63s6
::
93s6
::
6a6s
To a new record
Record No.
PGM
Mode switch
Program data
To the next record
~
Description Choice Program code
Printout type:
Receipt (1) = 00, Receipt (2) = 01, Receipt (3) = 02, Report = 10
Order (1) =20, Order (2) = 21, Order (3) = 22
Always “00”
Printout destination (Main):
R/J printer = 00, External printer 1 = 01, External printer 2 = 02
Always “00”
Printout destination (Backup):
R/J printer = 00, External printer 1 = 01, External printer 2 = 02
::
D10 D9
;;
D8D7
::
D6D5
;;
D4D3
::
D2D1
Significant
numbers
Significant
numbers
Significant
numbers
98
Key function/machine feature (P3)
Non PLU table programming
Programming procedure
Program data
Program sample
Description Choice Program code
Non PLU type: Short version = 0, Long version = 1
Price check digit is included in the price field.
Price × 10 n
Number of digits for price
Always “0000000”
Number of digits for scanning PLU search code
Flag code:
Number of digits for flag (1 ~ 3)
Flag code:
Actual value
:
D16
:
D15
:
D14
:
D13
;;;;;;;
D12 D11 D10 D9D8D7D6
:
D5
:
D4
:::
D3D2D1
Significant
number
No = 0
Yes = 1
Significant
number
Significant
number
Significant
number
Significant
number
Significant
numbers
• Long version barcode (with price check digit)
F1 F2 I1 I2 I3 I4 I5 P/C P1 P2 P3 P4 C/D
Flag Item code Price check digit Price Check digit
Program code: 1005000000072F1F20
• Long version barcode (without price check digit)
F1 F2 F3 I1 I2 I3 I4 P1 P2 P3 P4 P5 C/D
Flag Item code Price Check digit
Program code: 1105000000073F1F2F3
• Short version barcode
F1 F2 I1 I2 P1 P2 P3 C/D
Flag Item code Price (x 10) Check digit
Program code: 0013000000042F1F20
63s6
::
40s6
::
6a6s
To a new record
Record No.
PGM
Mode switch
Program data
To the next record
~
99
Program 3
TE-2200/2400 Dealer's Manual
63s64070s6a
s
PGM
Mode switch
Activation
Cancellation
Proceeds the next
vacant record.
63s60070s6::6a6
6:6a6B666::6a6
666
::6a6::6a6
6::6a6::6a6::6a6s
B
B
B
a
Record No. (001 ~ 999)
PGM
Mode switch
Unit price/quantity
*1
Action code
*1
Add/
Modify
Delete
Character
*1 *1
Status
*1
*1 *1
Bottle link Mix & match
Code
Scanning
Link-#
~
~
~~
~
~
}
{
}
{
PRICE
SHIFT
OBR
NLU
DEPT
A
A
B
B
*1
Optimum stock
Scanning PLU maintenance programming
Batch maintenance PLU programming
Programming procedure
*1 Skip by general function programming address code 33.
Activation of batch maintenance PLU
Activation procedure
100
Key function/machine feature (P3)
Scanning PLU direct maintenance programming
Programming procedure
63s60071s6
6
:
6a6B666
::
6a6
666
::
6a6
::
6a6
6
::
6a6
::
6a6
::
6a6s
B
B
B
a
PGM
Mode switch
Unit price/quantity
Action code *1
Character
*1 *1 Status *1
*1 *1
Bottle link Mix & match
Code
Scanning
Link-#
~
~~
~
~
}
{
}
{
OBR
NLU
DEPT
A
A
PRICE
SHIFT
*1 Skip by general function pro-
gramming address code 32.
*1
Optimum stock
101
Program 3
TE-2200/2400 Dealer's Manual
Scanning PLU individual programming
Programming procedure
63s60171 s6
6
::
66 6s6B666
6
::
6a6s
666s
6
::
6a6s
B
B
B
a
0170
B
Address code
PRICE
SHIFT
Code
Scanning
}
{
OBR
NLU
B
B
B
Character
Link-#
}
{
DEPT
Program data
Address code 22:
character programming
Address code 11:
link programming
Address code 13,20,21,23:
other programming
(Batch maintenance)
(PLU direct)
PGM
Mode switch
~
~
102
Key function/machine feature (P3)
Description Choice Program code
Bottle link record No. (0000 ~ 9999) ::::
D4D3D2D1
Significant
numbers
Description Choice Program code
Link mix & match record No. (00 ~ 99) ::
D2D1
Significant
numbers
Description Choice Program code
Unit quantity (0.01 ~ 9999.99)
Unit price (000000 ~ 999999)
::::
D12 D11 D10 D9
::
D8D7
::::::
D6D5D4D3D2D1
Integer part
(0000 ~ 9999)
Decimal part
(00 ~ 99)
Significant
numbers
Description Choice Program code
Link group record No. (00 ~ 99)
Link department record No. (00 ~ 99)
::
D4D3
::
D2D1
Significant
numbers
Significant
numbers
Description Choice Program code
Action code:
Addition = 0
Modification = 1
Deletion = 2 (Not effective for direct PLU maintenance)
:
D1
Significant
number
Program data
Action code
Unit price/quantity (Address code 21 for individual feature programming)
Link-# (Address code 11 for individual feature programming)
Bottle link (Address code 13 for individual feature programming)
Mix & match (Address code 20 for individual feature programming)
Optimum stock (Address code 14 for individual feature programming)
Description Choice Program code
Optimum stock quantity (0.001 ~ 99.999)
Enter without decimal point. :::::
D5D4D3D2D1
Significant
numbers
103
Program 3
TE-2200/2400 Dealer's Manual
One touch NLU programming
Programming procedure
63s6::77s66B6s
B
PGM
Mode switch
Rec No. (up to 3 digits)
To the next record
Code
Scanning
~OBR
}
{
NLU
for the U.S./Singapore
Food stamp (for Singapore, always “0”)
Taxable 1 status
Taxable 2 status
Taxable 3 status
for Canada
Donuts status
Non tax = 0 Taxable 3 = 3 Taxable 1 & 3 = 6
Taxable 1 = 1 Taxable 4 = 4 Taxable 1 & 4 = 7
Taxable 2 = 2 Taxable 1 & 2 = 5
for Other area
Non tax = 0 Taxable 4 = 4 Taxable 8 = 8
Taxable 1 = 1 Taxable 5 = 5 Taxable 9 = 9
Taxable 2 = 2 Taxable 6 = 6 Taxable 10 = 10
Taxable 3 = 3 Taxable 7 = 7
a
b
c
:
D6
:
(a+b+c)
D5
:
D6
:
D5
::
D6D5
No = 0
Yes = 1
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
Significant
number
Significant
numbers
Description Choice Program code
Taxable status:
See below. (In case of “00”, follow the linked department taxable status.)
Always “0”
Always “0”
Enable 0 unit price.
(Use this bit to change the status with that of the linked department.)
Enable negative price.
(Use this bit to change the status with that of the linked department.)
Hash
(Use this bit to change the status with that of the linked department.)
Permit price change operation
(Use this bit to change the status with that of the linked department.)
Permit multiplication operation
(Use this bit to change the status with that of the linked department.)
Price input compulsory
(Use this bit to change the status with that of the linked department.)
::
D6D5
;
D4
;
D3
:
(a+b+c)
D2
:
(a+b+c)
D1
Significant
numbers
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
a
b
c
a
b
c
Status (Address code 23 for individual feature programming)
Taxable status
104
Key function/machine feature (P3)
Issuing program reading report of program 3 mode
Issuing procedure
Report sample
—Program read symbol
—Transaction key program
—Key character/rec-#/file-#
—Key program
Department program
—Key character/rec-#/file-#
—Key program
—Batch program 1166
—Batch program 1566
—Batch program 1666
—Batch program 1766
Clerk program
—Clerk name/rec-#/file-#
—Clerk #/drw-#/secret-#
—Compulsory
—Commission rate
—Check # range
—Operation restriction
—Time range program
—General control program
—Tax table
BATCH01 0001-29
00 11-12-17-15-00
00-00-00-00-00
BATCH02 0002-29
01 11-12-17-15-00
00-00-00-00-00
0001-30
GROSS 0001-01
0002-30
NET 0002-01
0001-38 000001
REG1 204-000
1001-000
2002-000
DEPT01 026-051
CASH 013-001
0002-38
CSHR01 0001-061
0000000000
CSHR02 0002-061
0001-62 000000
00000000000000
0000000000
0002-62 000000
000000000000
MC#01 0001-91
1001
0001-93 000000
0002-93 100000
0001-98 00000000000000
0002-98 00000000000000
—Batch X/Z program
—Clerk detail link program
Arrangement program
—Rec-#/file-#/arrange no.
—Key descriptor/rec-#/file-#
—Employee program
—Scheduler program
—Terminal connection table
—Printer connection table
—I/O parameter table
63s6s
PGM
Mode switch
P
03....................
CHECK 0001-02
00000000000000
CREDIT2 0002-02
00000000000000
PD 0003-02
00000000000000
DEPT01 0001-05
00000000000000
11-66 000000
15-66 @1.23
16-66 000000
17-66 00
DEPT02 0002-05
C
01 0001-07
000001000001
67 0000000000
68 00000000
69 000000000000
70 0000000000
C
02 0002-07
0001-09 00:00 -> 01:00
0002-09 01:00 -> 02:00
0003-09 02:00 -> 03:00
0001-22 2200000000
0002-22 0000000000
0003-22 0000000000
0001-25
TX1 10.25%
TX1 0000
TX1 5003
105
Program 2
TE-2200/2400 Dealer's Manual
Character (Program 2)
Programming descriptors
Programming procedure
Programming data
Fixed totalizer (up to 12 characters)
62s6::::s66a6s
PGM
Mode switch
Address code
To other address code
Rec No. File No.
To the next address code
Character
☞ See “Entering characters” section.
~
GROSS
NET
CAID
CATL
CA-
CA+
CHID
CHTL
CH-
CH+
CKID
CKTL
CK-
CK+
CRID(1)
CRID(2)
CRID(3)
CRID(4)
CRTL
CR-
CR+
CAID2
CATL2
CA- 2
CA+ 2
CHID2
CHTL2
CH- 2
CH+ 2
CKID2
CKTL2
CK- 2
CK+ 2
CRID2(1)
CRID2(2)
CRID2(3)
CRID2(4)
CRTL2
CR- 2
CR+ 2
FSID
FSCACG
EBTTL
EBTCACG
RF
CUST
AVRG
FEE
+
NB
C-1
Address Contents Initial character
code
0101 Gross sales total
0201 Net sales total
0301 Cash in drawer
0401 Cash declared amount
0501 Declared short cash amount
0601 Declared over cash amount
0701 Charge in drawer
0801 Charge declared amount
0901 Declared short charge amount
1001 Declared over charge amount
1101 Check in drawer
1201 Check declared amount
1301 Declared short check amount
1401 Declared over check amount
1501 Credit 1 in drawer
1601 Credit 2 in drawer
1701 Credit 3 in drawer
1801 Credit 4 in drawer
1901 Credit declared amount
2001 Declared short credit amount
2101 Declared over credit amount
2201 Cash in drawer *
2301 Cash declared amount *
2401 Declared short cash amount *
2501 Declared over cash amount *
2601 Charge in drawer *
2701 Charge declared amount *
2801 Declared short charge amount *
2901 Declared over charge amount *
3001 Check in drawer *
3101 Check declared amount *
3201 Declared short check amount *
3301 Declared over check amount *
3401 Credit 1 in drawer *
3501 Credit 2 in drawer *
3601 Credit 3 in drawer *
3701 Credit 4 in drawer *
3801 Credit declared amount *
3901 Declared short credit amount *
4001 Declared over credit amount *
4101 Food stamp in drawer
4201 Food stamp cash change
4301 EBT in drawer
4401 EBT cash change
4501 Refund mode total
4601 Customer count
4701 Average sales per customer
4801 Check cashing service fee
4901 New balance fee
5001 (not used)
5101 Clerk commission 1 total
Address Contents Initial character
code
5201 Clerk commission 2 total
5301 Foreign currency cash in drawer 1
5401 Foreign currency check in drawer 1
5501 Foreign currency cash in drawer 2
5601 Foreign currency check in drawer 2
5701 Foreign currency cash in drawer 3
5801 Foreign currency check in drawer 3
5901 Foreign currency cash in drawer 4
6001 Foreign currency check in drawer 4
6101 Reduction
6201 Coupon
6301 Item return
6401 Clear counter
6501 Rounding 2 *
6601 Rounding 1
6701 Cancellation
6801 Money declaration
6901 Taxable amount
7001 Tax 1
7101 Tax exempt 1
7201 Taxable amount 2
7301 Tax 2
7401 Tax exempt 2
7501 Taxable amount 3
7601 Tax 3
7701 Tax exempt 3
7801 Taxable amount 4
7901 Tax 4
8001 Tax exempt 4
8101 Taxable amount 5
8201 Tax 5
8301 Tax exempt 5
8401 Taxable amount 6
8501 Tax 6
8601 Tax exempt 6
8701 Taxable amount 7
8801 Tax 7
8901 Tax exempt 7
9001 Taxable amount 8
9101 Tax 8
9201 Tax exempt 8
9301 Taxable amount 9
9401 Tax 9
9501 Tax exempt 9
9601 Taxable amount 10
9701 Tax 10
9801 Tax exempt 10
9901 Nontaxable amount
* Totalizers for sub currency
C-2
CECA1
CECK1
CECA2
CECK2
CECA3
CECK3
CECA4
CECK4
DC
COUPON
REF
CLEAR
ROUND
ROUND
CANCEL
DECLA
TA1
TX1
EX1
TA2
TX2
EX2
TA3
TX3
EX3
TA4
TX4
EX4
TA5
TX5
EX5
TA6
TX6
EX6
TA7
TX7
EX7
TA8
TX8
EX8
TA9
TX9
EX9
TA10
TX10
EX10
NON TAX
106
Character programming (P2)
Group character
Up to 12 characters
Address Contents Initial character
code
0106 Group 01
0206 Group 02
0306 Group 03
::
9906 Group 99
GROUP01
GROUP02
GROUP03
:
GROUP99
Address Contents Initial character
code
0118 Table 01
0218 Table 02
0318 Table 03
::
9918 Table 99
TBL01
TBL02
TBL03
:
TBL99
Address Contents Initial character
code
0120 Grand total 01
0220 Grand total 02
0320 Grand total 03
GT1
GT2
GT3
Clerk character
Up to 12 characters
Table analysis character
Up to 12 characters
Grand total character
Up to 12 characters
Address Initial character
Contents
code TE-2200/2400 (Eu) TE-2200/2400 (US)
0107 Clerk 01
0207 Clerk 02
0307 Clerk 03
::
9907 Clerk 99
C
01
C
02
C
03
:
C
99
C01
C02
C03
:
C99
107
Program 2
TE-2200/2400 Dealer's Manual
Address Contents Initial character
code
main currency symbol (2), @ (2), No. (2), split pricing (2), not used (1)
0123 training filler (1), training symbol (1), not used (1), sub currency symbol (2)
No. of item sold (2), No. of customer (2), scalable item @ (2),
0223 scale weight (2), new price (2), multiplication display (2)
0323 multiplication (6) check in use (6)
0423 taxable symbol 1 (3 each) for tax 1, tax 2, tax 3, tax 4, tax 5
0523 taxable symbol 2 (3 each) for tax 6, tax 7, tax 8, tax 9, tax 10
0623 taxable symbol 3 (3 each) for tax 1/2, tax 1/3, tax 1/4, not used, tax 2/3
0723 taxable symbol 4 (3 each) for not used, not used, not used, nontax, all, F/S
0823 foreign currency (2 each), character edit mode (INS/OVR) (4 each)
0923 mode symbol 1 (4 each) REG1/2, RF, REG–
1023 mode symbol 2 (4 each) PGM, Daily X, Daily Z, Periodic
1123 mode symbol 3 (4 each) training, not used, PGM read
1223 decimal: amount/q’ty, separator (main/sub) (1 each), not used (3), square (7)
1323 A.M., P.M. (3 each), ST displayed on the dot display (2)
1423 slip continued (12), page (2)
1523 (not used)
1623 display subtotal symbol (ST key) (16)
1723 subtotal symbol (16)
1823 total symbol (16)
1923 change symbol (16)
2023 check cashing fee (16)
2123 check cashing amount (16)
2223 Bon message (12)
2323 break (16)
2423 check No. (10)
2523 service total (16)
2623 item discount total (16)
2723 scale manual entry (12)
2823 (not used)
2923 report total symbol (12)
3023 report old price symbol (16)
3123 red price symbol (16)
3223 food stamp change symbol (16)
3323 table No. symbol (10)
3423 future order message (16)
3523 declared amount (16)
3623 entering child item in separate check or void item in previous item void operation
3723 current stock (16)
3823 last stock (16)
3923 added stock (16)
4023 reviewing (16)
4123 end of transaction (16)
4223 designating sub currency (16)
4323 Element title 1 of CF X/Z report (16)
4423 Element title 2 of CF X/Z report (16)
4523 Element title 3 of CF X/Z report (16)
4623 Element title 4 of CF X/Z report (16)
4723 Element title 5 of CF X/Z report (16)
4823 Element title 6 of CF X/Z report (16)
4923 Element title 7 of CF X/Z report (16)
$@ No/ **
• @No/ ** ⁄
NoCT @LB *QT
NoCT@ LB *QT
BUSY
X BUSY
T1 T2 T3 T4 T5
T6 T7 T8 T9 T10
T12T13T14 T23
F
* * * * *
REG
RFR-
Pn
X Z XZ
TRG PGMX
..,.., X
AM PM ST
CONTINUED
P
ST
ST
TL
CG
-
CACG
** STUB **
**BREAK END**
CHECK No.
SRVC TL
DISCOUNT
MANUAL ENTRY
TL
OLD PRC
RED PRC
FSCG
TABLE No.
**Future Order**
DECLA
Sub item ?
STK(NEW)
STK(OLD)
STK(ADD)
** REVIEW **
* END **
EURO money
RECORD
DESCRIPTOR
QUANTITY/No
QUANTITY
No
AMOUNT
DISCOUNT
U.S.
Others
U.S.
Others
U.S.
Others
Special character
108
Character programming (P2)
Address Contents Initial character
code
5023 element title 8 of CF X/Z report (16)
5123 element title 9 of CF X/Z report (16)
5223 element title 10 of CF X/Z report (16)
5323 element title 11 of CF X/Z report (16)
5423 element title 12 of CF X/Z report (16)
5523 element title 13 of CF X/Z report (16)
5623 element title 14 of CF X/Z report (16)
5723 element title 15 of CF X/Z report (16)
5823 element title 16 of CF X/Z report (16)
5923 element title 17 of CF X/Z report (16)
6023 element title 18 of CF X/Z report (16)
6123 element title 19 of CF X/Z report (16)
6223 element title 20 of CF X/Z report (16)
6323 element title 21 of CF X/Z report (16)
6423 element title 22 of CF X/Z report (16)
6523 element title 23 of CF X/Z report (16)
6623 element title 24 of CF X/Z report (16)
6723 element title 25 of CF X/Z report (16)
6823 element title 26 of CF X/Z report (16)
6923 element title 27 of CF X/Z report (16)
7023 element title 28 of CF X/Z report (16)
7123 element title 29 of CF X/Z report (16)
7223 element title 30 of CF X/Z report (16)
7323 model name 1 of CF X/Z report (16)
7423 model name 2 of CF X/Z report (16)
7523 header title 1 of CF X/Z report (16)
7623 header title 2 of CF X/Z report (16)
7723 header title 3 of CF X/Z report (16)
7823 header title 4 of CF X/Z report (16)
7923 header title 5 of CF X/Z report (16)
8023 header title 6 of CF X/Z report (16)
8123 header title 7 of CF X/Z report (16)
8223 header title 8 of CF X/Z report (16)
OLD AMOUNT
RED AMOUNT
STOCK
CUSTOMER
GROSS AMOUNT
NET No
NET AMOUNT
GROSS QUANTITY
No of DISCOUNT
DISCOUNT AMOUNT
RANDOM CODE
OBR CODE
CLOCK IN DATE
CLOCK IN TIME
CLOCK OUT DATE
CLOCK OUT TIME
WORKING TIME
EMPLOYEE NAME
EMPLOYEE No
CLERK
START TIME
END TIME
PRICE SHIFT
TE-2200
TE-2400
MODEL
MACHINE
REPORT
FILE
MODE
Z COUNTER
DATE
TIME
109
Program 2
TE-2200/2400 Dealer's Manual
Message
Up to 24 characters
Address Contents Initial character Yours
code
0132 1st line of logo message
0232 2nd line of logo message
0332 3rd line of logo message
0432 4th line of logo message
0532 1st line of commercial message
0632 2nd line of commercial message
0732 3rd line of commercial message
0832 4th line of commercial message
0932 1st line of bottom message
1032 2nd line of bottom message
1132 3rd line of bottom message
1232 4th line of bottom message
1332 1st line of bill top message
1432 2nd line of bill top message
1532 3rd line of bill top message
1632 4th line of bill top message
1732 1st line of bill copy message
1832 2nd line of bill copy message
1932 3rd line of bill copy message
2032 4th line of bill copy message
2132 1st line of bill bottom message
2232 2nd line of bill bottom message
2332 3rd line of bill bottom message
2432 4th line of bill bottom message
2532 Post receipt message
2632 1st line of guest intermediate message
2732 2nd line of guest intermediate message
2832 3rd line of guest intermediate message
2932 4th line of guest intermediate message
3032 1st line of guest bottom message
3132 2nd line of guest bottom message
3232 3rd line of guest bottom message
3332 4th line of guest bottom message
3432 5th line of guest bottom message
3532 6th line of guest bottom message
3632 7th line of guest bottom message
3732 8th line of guest bottom message
3832 9th line of guest bottom message
3932 10th line of guest bottom message
4032 1st line of Australian GST MOF message
4132 2nd line of Australian GST MOF message
4232 3rd line of Australian GST MOF message
YOUR RECEIPT
THANK YOU
CALL AGAIN
DUPLICATE RECEIPT
TAX INVOICE
* INDICATES
TAXABLE SUPPLY
110
Character programming (P2)
Report header
Up to 12 characters
Batch X/Z header
Up to 12 characters
Check endorsement message
Up to 40 characters
Address Contents Initial character
code
0124 Fixed totalizer report
0224 Transaction key report
0324 PLU report
0424 Department report
0524 Group report
0624 Cashier/clerk report
0724 Not used
0824 Hourly sales report
0924 Monthly sales report
1024 Not used
1124 Table analysis report
1224 Open check report
1324 Scanning PLU
1424 Hourly item
1524 PLU stock report
1624 Financial report
1724 Mix & match
1824 PLU by amount
1924 PLU by quantity
2024 Department by amount
2124 Department by quantity
2224 Scanning PLU best
2324 Inactive scanning PLU
2424 Individual item
2524 Not used
2624 Time & attendance
2724 Scanning PLU stock
FIX
TRANS
PLU
DEPT
GROUP
CASHIER
HOURLY
MONTHLY
SUB DEPT
ANALYSIS
OPEN CHK
SCAN PLU
HOURLY ITEM
PLU STOCK
FLASH
MIX&MATCH
PLU AMT
PLU QTY
DEPT AMT
DEPT QTY
PLU BEST
NON ACTIVE
INDIVIDUAL
NFP
ATTENDANCE
SCAN STOCK
Address Contents Initial character
code
0129 Batch 01
0229 Batch 02
0329 Batch 03
::
1029 Batch 10
BATCH 01
BATCH 02
BATCH 03
:
BATCH 10
Address Contents Initial character
code
0133 Check endorsement message 01
0233 Check endorsement message 02
0333 Check endorsement message 03
0433 Check endorsement message 04
111
Program 2
TE-2200/2400 Dealer's Manual
Slip/external printer message
Up to 40 characters (Contents are the same as file032.)
Recall character message
Up to 40 characters
Mix & match character
Up to 12 characters
Employee character
Up to 12 characters
Address Contents Initial character
code
0134 Slip/external printer message 01
0234 Slip/external printer message 02
0334 Slip/external printer message 03
::
4134 Slip/external printer message 41
YOUR RECEIPT
THANK YOU
CALL AGAIN
:
* INDICATES TAXABLE SUPPLY
Address Contents Initial character
code
0139 Recall character 01
0239 Recall character 02
0339 Recall character 03
::
99939 Recall character 999
Address Contents Initial character
code
0151 Mix & match 01
0251 Mix & match 02
0351 Mix & match 03
::
9951 Mix & match 99
DISCOUNT01
DISCOUNT02
DISCOUNT03
:
DISCOUNT99
Address Contents Initial character
code
0161 Employee 01
0261 Employee 02
0361 Employee 03
::
9961 Employee 99
CSHR01
CSHR02
CSHR03
:
CSHR99
Help message
Up to 24 characters
Address Contents Initial character
code
00185 Help message 001
00285 Help message 002
00385 Help message 003
::
19985 Help message 199
ENTER NUMBER THEN
PRESS <HELP> KEY.
:
112
Character programming (P2)
Terminal connection table
Up to 8 characters
Address Contents Initial character
code
0191 Physical No. 01 MC#01
Error message
Up to 16 characters
Miscellaneous message
Up to 16 characters
Printing guidance message
Up to 24 characters
Address Contents Initial character
code
0180 Error code
0280 Mode switch position changed before…
0380 Error code
::
23880 Flash memory format is illegal.
E001
Wrong mode
E002
:
Illegal format
Address Contents Initial character
code
0178 Register total working time
0278 Register start date message
0378 RAM message in PGM5
::
5878 Model name
GT TIME
START DATE
RAM
:
Address Contents Initial character
code
0179 not used
0279 not used
0379 not used
::
8579 Euro currency system setup
:
set.
AT command
Up to 62 characters
Address Contents Initial character
code
0196 Command set to MODEM
0296 on hook, confirmation
AT COMMAND**** ***
ATA ATI4
113
Program 2
TE-2200/2400 Dealer's Manual
Program guidance message
Up to 16 characters
Registration guidance message
Up to 16 characters
Address Contents Initial character
code
0183 Range program message 1st line
0283 Input start No. message 1st line
0383 Input start No. message 2nd line
::
9783
Range PGM
Input start No.
and press <#1>
:
Address Contents Initial character
code
0181 Guidance message of NFP 1st line
0281 Guidance message of NFP 2nd line
0381 Guidance message of NFP 3rd line
::
2281 Guidance message of price comp 4th line
Not Found PLU
Input Unit Price
,and press DEPT
:
> key
X/Z guidance message
Up to 16 characters
Address Contents Initial character
code
0182 PLU range report message 1st line
0282 Input start No. message 1st line
0382 Input start No. message 2nd line
::
4882 PLU reset message 1st line
PLU by range
Input start No.
and press <#1>
:
PLU Z clear
Online password
Up to 8 characters
Address Contents Initial character
code
0197 Online password
114
Character programming (P2)
Programming item/key descriptors
Programming procedure
Department key/transaction key
PLU
Flat-PLU key
Programming data
Department
up to 16 characters
PLU/flat-PLU
up to 16 characters
Contents Initial character
Department 01
Department 02
Department 03
:
Department 99
DEPT01
DEPT02
DEPT03
:
DEPT99
PLU No. Contents Initial character
0001 PLU 0001
0002 PLU 0002
0003 PLU 0003
::
Maximum No.: Depend on the model
PLU0001
PLU0002
PLU0003
:
62s66 6s
PGM
Mode switch
To another department/transaction key
Characters
☞ See “Entering
characters” section.
Department key
Transaction key
62s6+6a6s
PGM
Mode switch
To a new (not sequential) PLU
Characters
☞ See “Entering characters” section.
To the next PLU
(Rec No,: 4 digits)
(Random code: 6 digits)
PLU No.
62s66B66s
PGM
Mode switch
To another flat-PLU key
Characters
☞ See “Entering characters” section.
Flat-PLU key
MENU
SHIFT
115
Program 2
TE-2200/2400 Dealer's Manual
Transaction key
Up to 12 characters
Function Code Initial character
Add check
Arrangement
Birth date
Bill copy
Bottle return
Cancel
Cash amount tendered
Charge
Check endorsement
Check print
Check tender
Clerk number
Clock-in/out
Coupon
Coupon 2
Credit
Cube
Currency exchange
Customer number
Date/Time
Decimal point
Declaration
Department
Deposit
Discount
Eat-in
EBT tender
Enter
Error correct
Flat PLU *
Food stamp status shift
Food stamp subtotal
Food stamp tender
Help
Ketten Bon
Loan
Lock out unused key
Manual tax
Media change
Menu shift
Merchandise subtotal
Minus
Multiplication/Date/Time
Multiplication
New balance
New check
New/old check
No sale
Non-add
Non-add/No sale
ADD CHK
ARG
BILL
BR
CANCEL
CASH
CHARGE
CK.E
CHKP
CHECK
CLK#
CLOCK-IN/OUT
COUPON
CPN2
CREDIT
XXX
CE
CT
DATE/TIME
.
DECLA
DEPTnn
DEPOSIT
%–
EAT-IN
EBTTD
ENT
CORR
PLUnnnn
F/S
FSST
FSTD
HELP
X/KETTEN
LOAN
TAX
MEDIA CHG
MENU
MDST
-
X
X
NB
NEW CHK
NEW/OLD
NS
#
#/NS
094
044
047
053
236
001
002
039
012
003
072
108
023
036
004
090
045
043
101
098
061
nn051
025
028
128
007
105
034
nnnn063
059
081
005
141
113
019
000
032
118
064
080
027
082
100
006
091
093
042
040
041
Function Code Initial character
Normal receipt
OBR
Old check
One touch NLU
Open
Open2
Open check
Operator read/reset
Paid out
Pick up
Plus
PLU
Previous balance
Previous balance subtotal
Premium
Price
Price change
Price inquiry
Price shift
Quantity/for
Rate tax
Recall
Receipt
Receipt on/off
Received on account
Red price
Refund
Review
Separate check
Slip back feed/release
Slip feed/release
Slip print
Square
Stock inquiry
Store
Subtotal
Table number
Takeout
Tax exempt
Tax status shift
Taxable amount subtotal
Text print
Text recall
Three zero
Tip
Tray total
Two zero
Validation
VAT
Void
NRMRCT
OBR
OLD CHK
NLU
OPEN
OPEN2
OPEN CHK
OPE X/Z
PD
P.UP
+
PLU#
PB
PBST
%+
PRC
PRC CHG
PRCINQ
PRICE SHIFT
QT
TAX
RECALL
RCT
RCT ON/OFF
RC
RED
RF
REVIEW
SEP CHK
SB/R
SF/R
SLIP
XX
STKINQ
STORE
SUBTOTAL
TBL#
TAKE-OUT
EXEMPT
T/S
TAST
PRT
CHAR
000
TIP
TRAY TL
00
VLD
VAT
VOID
016
103
092
138
067
068
117
073
021
022
029
048
026
079
030
049
104
008
069
083
031
131
038
076
020
060
033
071
095
054
056
055
084
009
130
075
058
129
062
057
077
011
010
097
015
074
096
037
046
035
116
Character programming (P2)
Programming item/clerk descriptors by range
Programming procedure
Program data
Department
up to 16 characters
PLU/flat-PLU
up to 16 characters
Contents Initial character
Department 01
Department 02
Department 03
::
Department 99
DEPT01
DEPT02
DEPT03
:
DEPT99
62s6990000 ::s6
6::6a6::6a6::a6s
PGM
Mode switch
Starts “0001”.
Department = 05
PLU/flat-PLU = 04
Ends “the last record”.
Start rec-#
(Max. 4 digits) End rec-#
(Max. 4 digits) Program data
(character)
}
~~
~
PLU No. Contents Initial character
0001 PLU 0001
0002 PLU 0002
0003 PLU 0003
::
Maximum No.: Depend on the model.
PLU0001
PLU0002
PLU0003
:
117
Program 2
TE-2200/2400 Dealer's Manual
Entering characters
By character keyboard
TE-2200 character keyboard
RECEIPT JOURNAL
FEED FEED
#-2
#-1
C
789
456
123
000•
SHIFT
INS/
OVR
<
—
DOUBLE
SIZE
—
>
ABCDEFG
abc de f g
HI7J8K9LMN
hi j k lmn
OP4Q5R6S
opq r s
TU1V2W3X
tuvwx
YZ0
yz
7
9 0
1 C
5 A
B
2 3 8
4
RECEIPT JOURNAL
FEED FEED
#-2
#-1
C
789
456
123
000•
SHIFT
INS/
OVR
<
—
DOUBLE
SIZE
—
>
ABCDEFG
abc de f g
HI7J8K9LMN
hi j k lmn
OP4Q5R6S
opq r s
TU1V2W3X
tuvwx
YZ0
yz
7
9 0
1 C
5 A
B
2 3 8
4
TE-2200 US
TE-2200 Eu
Example:
Input “
A
pple J u i c e ”,
enter “DBL”“A” “SHIFT”“p” “p” “l” “e” “SPACE” “CAP”“J” “SHIFT”“u” “i” “c” “e” -.
118
Character programming (P2)
1Shift key
TE-2200:
Pressing this key shifts the character through the upper-
case letter, lower case letter and numerics.
TE-2400:
Pressing this key shifts the character from the uppercase
letter to lower case letter and vice versa.
2Left cursor key
Move the cursor to the left one by one to modify characters.
3Right cursor key
Move the cursor to the right one by one to modify charac-
ters.
4Double size letter key
Specifies that the next character you enter a double size
character.
You must press this key before each double size character.
5Space key
Set a space by depression.
6CAP key
Pressing this key shifts the character to the uppercase letter.
7Alphabet keys
Use those keys to enter characters.
8Numeric keys
Use those keys to enter program codes, memory number
and character codes.
9Character fixed key
Press this key to fix all entered characters before you assign
them to function keys, PLUs, department keys and so on.
0Backspace/Character code fixed key
Registers one character with code (2 or 3 digit).
Clears the last entered character, much like a back space
key.
AProgram end key
Terminates the character programming.
BCharacter enter key
Registers the programmed characters.
CInsert/Override key
Press this key to change the status “Insert” between the
original characters or “Override” the original characters.
007 014 021 028 035 042 049 056 063 070
006 013 020 027 034 041 048 055 062 069
005 012 019 026 033 040 047 054 061 068
004 011 018 025 032 039 046 053 060 067
003 010 017 024 031 038 045 052 059 066
002 009 016 023 030 037 044 051 058 065 099
001 008 015 022 029 036 043 050 057 064
RECEIPT JOURNAL
FEED FEED
C
789
456
123
000•
#-2
#-1
;
1
Q
A
Z
:
!
q
a
z
-
2
W
S
X
+
@
w
s
x
/
3
E
D
C
?
#
e
d
c
.
4
R
F
V
,
5
T
G
B
%
t
g
b
•
6
Y
H
N
^
y
h
n
'
7
U
J
M
&
u
j
m
8
I
K
*
i
k
9
O
L
$
r
f
v
)
p
(
o
l
0
P
CAP SHIFT DBL
OVR
/INS
MENU
1 5
8
4C 9 06
2
A
B
3
7
TE-2400 US
TE-2400 character keyboard
007 014 021 028 035 042 049 056 063 070
006 013 020 027 034 041 048 055 062 069
005 012 019 026 033 040 047 054 061 068
004 011 018 025 032 039 046 053 060 067
003 010 017 024 031 038 045 052 059 066
002 009 016 023 030 037 044 051 058 065 099
001 008 015 022 029 036 043 050 057 064
RECEIPT JOURNAL
FEED FEED
C
789
456
123
000•
#-2
#-1
;
1
Q
A
Z
:
!
q
a
z
-
2
W
S
X
+
@
w
s
x
/
3
E
D
C
?
#
e
d
c
.
4
R
F
V
,
5
T
G
B
%
t
g
b
•
6
Y
H
N
^
y
h
n
'
7
U
J
M
&
u
j
m
8
I
K
*
i
k
9
O
L
$
r
f
v
)
p
(
o
l
0
P
CAP SHIFT DBL
OVR
/INS
MENU
1 5
8
4C 9 06
2
A
B
3
7
TE-2400 Eu
Example:
Input “
A
pple J u ice ”,
enter “DBL”“A” “SHIFT”“p” “p” “l” “e” “SPACE” “CAP”“J” “SHIFT”“u” “i” “c” “e” -.
119
Program 2
TE-2200/2400 Dealer's Manual
By character code
0@P p
!1AQaq
"2BRbr
#3CScs
$4DTdt
%5EUeu
&6FVfv
'7GWgw
(8HXhx
)9IYiy
*:JZjz
+;K[k{
,<L\l|
-=M]m}
.>N^n~
/?O_o
Ç
ü
é
â
ä
à
å
ç
ê
ë
è
ï
î
ì
Ä
Å
Éá Ó-
æí
D
ß±
Æó ÊÔ_
ôú ËÒ
3
/4
öñ Èõ¶
òÑÁ ⁄Õ§
ûªÂã͵÷
ùºÀÃÎp_
ÿ¿© ÏP
Ö® Ú¨
ܬ ە
ø
1
/2
Ù
1
£
1
/4
y
3
Ø¡¢ |Y
2
‹«¥ Ì
ƒ»ı¤
Space
Double
sized
32 48 64 80 96 112 128
33 49 65 81 97 113 129
34 50 66 82 98 114 130
35 51 67 83 99 115 131
36 52 68 84 100 116 132
37 53 69 85 101 117 133
38 54 70 86 102 118 134
39 55 71 87 103 119 135
40 56 72 88 104 120 136
41 57 73 89 105 121 137
42 58 74 90 106 122 138
43 59 75 91 107 123 139
44 60 76 92 108 124 140
45 61 77 93 109 125 141
46 62 78 94 110 126 142
47 63 79 95 111 127 143
144 160 176 192 208 224 240
145 161 177 193 209 225 241
146 162 178 194 210 226 242
147 163 179 195 211 227 243
148 164 180 196 212 228 244
149 165 181 197 213 229 245
150 166 182 198 214 230 246
151 167 183 199 215 231 247
152 168 184 200 216 232 248
153 169 185 201 217 233 249
154 170 186 202 218 234 250
155 171 187 203 219 235 251
156 172 188 204 220 236 252
157 173 189 205 221 237 253
158 174 190 206 222 238 254
159 175 191 207 223 239 255
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
Every time you enter a character, choose character codes by the character code list (below) and press the ^
key to settle it. After you complete entering characters, press the - key to fix them.
Example:
Input “
A
pple Juice ”,
enter “ 255^65^112^112^108^101^32^ 74^117^105^99^101^- ”
Character code list
120
Character programming (P2)
Editing characters
Correcting a character just entered
OPERATION DISPLAY (character)
“L” “E” “N” “O” “N” 1Enter LENON, instead of LEMON.
yyy 1Press left arrow key three times.
B1Override mode
“M” 1Enter “M”.
Correcting and adding a PLU descriptor already set
OPERATION DISPLAY (character)
-1Enter “00”.
15+1Enter PLU No.
“S”, “o”,“d”, “a”, “ ” 1Enter “Soda” and “space”.
B1Override mode
“L” 1Enter “L”.
Correcting a key descriptor already set
OPERATION DISPLAY (character)
-1Enter “00”.
!1Designate an appropriate key
uu 1Press right arrow key two times.
“M” 1Enter “M”.
^1Delete “N”.
Correcting a message descriptor already set
OPERATION DISPLAY (character)
0101s1Enter record and file number.
uu 1Press right arrow key two times.
“O” 1Enter “O”.
^1Delete “A”.
INS/
OVR
INS/
OVR
LENON
LENON
LENON
LEMON
lemon
Soda lemon
Soda lemon
Soda Lemon
LENON
LENON
LEMNON
LEMON
GRASS
GRASS
GROASS
GROSS
* Reverse or blinking digit indicates cursor position.
121
Program 2
TE-2200/2400 Dealer's Manual
Issuing program reading report of program 2 mode
Issuing procedure
Report sample
P
02....................
GROSS 0001-01
NET 0002-01
CAID 0003-01
CATL 0004-01
0005-01
CHECK 0001-02
CHARGE2 0002-02
PD 0003-02
0004-02
DEPT01 0001-05
DEPT02 0002-05
DEPT03 0003-05
0004-05
GROUP01 0001-06
GROUP02 0002-06
GROUP03 0003-06
0004-06
C
01 0001-07
C
02 0002-07
C
03 0003-07
0004-07
TBL01 0001-18
TBL02 0002-18
TBL03 0003-18
0004-18
GT1 0001-20
GT2 0002-20
GT3 0003-20
• @No/ ** ™ 0001-23
NoCT@ LB *QT 0002-23
X BUSY 0003-23
FIX 0001-24
TRANS 0002-24
PLU 0003-24
0004-24
BATCH 01 0001-29
BATCH 02 0002-29
BATCH 03 0003-29
0004-29
—Program read symbol
—Fixed totalizer character
—Transaction key character
—Department character
—Group character
—Clerk character
—Table character
—Special character
—Report header character
—Batch X/Z character
0001-32
YOUR RECEIPT
0002-32
THANK YOU
0001-33
***ENDORSE MESSAGE******
****************
0002-33
AGE***********
0001-34
***SLIP MESSAGE*********
****************
0002-34
E**************
0001-39
CHARACTER RECALL *******
*****************
0002-39
L ************
ORDER01 0001-65
ORDER02 0002-65
ORDER03 0003-65
0004-65
MC#01 0001-91
0001-96
AT COMMAND**************
************************
*******
0002-96
ATA ATI4
PASSWORD 0001-97
—Receipt message
—Check endorsement message
—Slip/external printer message
—Recall character
—Order character
—Terminal connection table character
—AT command
— Online password
62s6s
PGM
Mode switch
122
Character programming (P2)
123
Program 1
TE-2200/2400 Dealer's Manual
Unit price/rate (Program 1)
Date/time setting
Date setting
Time setting
Unit price program
Programming procedure
Programming the 1st unit price and unit quantity (to department/flat-PLU key)
61s6:: :: 66C
B
x
61s6:::::66C
B
x
DATE/
TIME
DATE/
TIME
PGM
Mode switch
Hour Minute
(00 ~ 23) (00 ~ 59)
Hour Minute 10 second
(00 ~ 23) (00 ~ 59) (0 ~ 5)
* You can use <X>, <X/XX> or <X/KETTEN> instead of these keys.
PGM
Mode switch
or
or
B
x
61s6:: :: ::66C
61s620::::::66C
DATE/
TIME
DATE/
TIME
B
x
PGM
Mode switch
Year Month Day
Range: 2000 ~ 2099
or
PGM
Mode switch
Year Month Day
Range: 2000 ~ 2099
or
* You can use <X>, <X/XX> or <X/KETTEN> instead of these keys.
*
*
*
*
61s66::66s
B
PGM
Mode switch
To another department/flat-PLU key
Department
Program data
(12 digits) Flat-PLU
~
MENU
SHIFT
124
Unit price/rate programming (P1)
Programming the unit price and unit quantity (to PLU)
Program data
Description Choice Program code
D12 ~ D7 for non scalable item (unit quantity/2nd unit quantity)
Unit quantity (integer)
Unit quantity (decimal)
D12 ~ D7 for scalable item (unit quantity/2nd unit quantity)
Unit quantity (integer)
Unit quantity (decimal)
Always “0”
Unit price
::::
D12 D11 D10 D9
Significant
numbers
::
D8D7
Significant
numbers
::::::
D6D5D4D3D2D1
::
D12 D11
:::
D10 D9D8
Significant
numbers
Significant
numbers
Significant
numbers
;
D7
61s6+6::6a6s
PGM
Mode switch
To a new (not sequential) PLU
Program data
(12 digits)
Different program to the next PLU
Same program
(Rec No.: 4 digits)
(Random code: 6 digits)
PLU No.
~
125
Program 1
TE-2200/2400 Dealer's Manual
Rate program
<CURRENCY EXCHANGE>
<CHECK>, <NEW BALANCE>, <PREMIUM (%+)>, <DISCOUNT (%–)>, <RATE TAX>
Amount program
<CASH>, <CHECK>, <NEW BALANCE>, <PLUS (+)>, <MINUS (–)>, <COUPON>
Scanning PLU direct maintenance programming
Programming procedure
*1 Skip by general function programming address code 32.
Program data
Description Choice Program code
Unit quantity (0.01 ~ 9999.99)
Unit price (000000 ~ 999999)
::::
D12 D11 D10 D9
decimal part
(00 ~ 99)
integer part
(0000 ~ 9999)
Significant
numbers
::
D8D7
::::::
D6D5D4D3D2D1
61s6::::
^
:::: 6E6s
PGM
Mode switch
Preset rate
Integer
(Max. 4-digits) Decimal
(Max. 4-digits)
Example:
$1.00 = ¥110.50 21^105
¥100 = $0.9050 20^905
61s6::^:: 66s
PGM
Mode switch
Preset rate
Integer
(Max. 2-digits) Decimal
(Max. 2-digits)
Appropriate
key
61s6:::::: 66s
PGM
Mode switch
Amount
(Max. 6-digits)
Appropriate
key
OBR
61s60071s6
6B66::6a66s
B
B
a
PGM
Mode switch
Program data
*1
Code
Scanning
~
PRICE
SHIFT Link Department
NLU
Link Dept No.
126
Unit price/rate programming (P1)
Issuing program reading report of program 1 mode
Issuing procedure
Report sample
61s6s
PGM
Mode switch
P
01....................
CASH @100.00
CHECK @1.00
-@1.00
%- 10%
DEPT01 0001-05
1.2 @1.00
DEPT02 0002-05
1 @2.00
—Program read symbol
—Transaction key unit price or rate
—Department descriptor/rec-#/file-#
—Unit quantity/unit price
127
Program 6
TE-2200/2400 Dealer's Manual
Program reading (Program 6)
Issuing program reading report
Issuing procedure
Reading by file
Reading by range
Report code
File name Report code Note
Unit price Character Status, etc.
Fixed totalizer ----- 201 -----
Transaction key 102 202 302
PLU 104 204 304 By range reading
Department 105 205 305 By range reading
Group ----- 206 -----
Clerk ----- 207 307 By range reading
Hourly sales ----- ----- 309
Scanning PLU ----- ----- 316
Table analysis ----- 218 318
Grand total ----- 220 -----
General control ----- ----- 322
Special character ----- 223 -----
Report header ----- 224 -----
Tax table ----- ----- 325
Set menu table ----- ----- 328
Batch X/Z ----- 229 329
Clerk detail link ----- ----- 330
Receipt message ----- 232 -----
Check endorsement message ----- 233 -----
Slip/external printer message ----- 234
Arrangement table ----- ----- 338
Character recall ----- 239
Non-PLU table ----- ----- 340
Check print control ----- ----- 341
Mix & match ----- 251 351
Employee ----- ----- 361
Scheduler ----- ----- 362
Bottle link table ----- ----- 373
One touch NLU table ----- ----- 377
Miscellaneous message ----- 278 -----
Printing guidance message ----- 279 -----
Error message ----- 280 -----
Registration guidance message ----- 281 -----
X/Z guidance message ----- 282 -----
Program guidance message ----- 283 -----
Help message ----- 285 -----
Terminal connection table ----- 291 391
Printer connection table ----- ----- 393
AT command ----- 296 -----
Online password ----- 297 -----
I/O parameter table ----- ----- 398
66s6::: s6::a6::a
66s6::: s
~~
PGM
Mode switch
Reading code
PGM
Mode switch
Reading code Start rec-# End rec-#
128
Program reading (P6)
Report sample
Fixed totalizer
Transaction key
Program 1
Program 2
Program 3
—Program 2 mode symbol
—Fixed totalizer descriptor/rec-#/file-#
P
02....................
GROSS 0001-01
NET 0002-01
CAID 0003-01
CATL 0004-01
P
01....................
CHECK @10.00
CASH @1.00
- @2.20
%- 10.24%
—Program 1 mode symbol
—Transaction key descriptor/unit price
—Transaction key descriptor/rate
P
02....................
CHECK 0001-02
CREDIT2 0002-02
PD 0003-02
CASH 0004-02
—Program 2 mode symbol
—Transaction key descriptor/rec-#/file-#
P
03....................
CHECK 0001-02
000000000000
CREDIT2 0002-02
000002000002
—Program 3 mode symbol
—Transaction key descriptor/rec-#/file-#
129
Program 6
TE-2200/2400 Dealer's Manual
PLU
Program 1
Program 2
Program 3
—Program 1 mode symbol
—PLU range
—PLU descriptor/rec-#/file-#
—PLU random code
—Unit quantity/unit price
P
01....................
#000001 - #000010
PLU0001 0001-04
#000001
1.23 @10.00
PLU0002 0002-04
#000002
2.34 @30.00
—Program 2 mode symbol
—PLU range
—PLU descriptor/rec-#/file-#
—PLU random code
P
02....................
#000001 - #000010
PLU0001 0001-04
#000001
PLU0002 0002-04
#000002
PLU0003 0003-04
—Program 3 mode symbol
— PLU range
—PLU descriptor/rec-#/file-#
—Address code 01 ~ 10, 18 program
—Address code 11 program
—Address code 12 program
—Address code 13 program
—Address code 14 program
—Address code 15 program
—Address code 16 program
—Address code 17 program
P
03....................
#000001 - #000010
PLU0001 0001-04
00000000000000
11-66 000000
12-66 #000000
13-66 <- 0001-28
14-66 12.345
15-66 @1234.56
16-66 000000
17-66 00
PLU0002 0002-04
130
Program reading (P6)
Department
Program 1
Program 2
Program 3
Group
—Program 1 mode symbol
—Department range
—Department descriptor/rec-#/file-#
—Unit quantity/unit price
P
01....................
#0001 - #0010
DEPT01 0001-05
1.23 @10.00
DEPT02 0002-05
2.34 @30.00
—Program 2 mode symbol
—Department range
—Department descriptor/rec-#/file-#
P
02....................
#0001 - #0010
DEPT01 0001-05
DEPT02 0002-05
DEPT03 0003-05
—Program 3 mode symbol
—Department range
—Department descriptor/rec-#/file-#
—Address code 01 ~ 10, 18 program
—Address code 11 program
—Address code 15 program
—Address code 16 program
—Address code 17 program
P
03....................
#0001 - #0010
DEPT01 0001-05
00000000000000
11-66 000000
15-66 @1234.56
16-66 000000
17-66 00
DEPT02 0002-05
—Program 2 mode symbol
—Group descriptor/rec-#/file-#
P
02....................
GROUP01 0001-06
GROUP02 0002-06
GROUP03 0003-06
131
Program 6
TE-2200/2400 Dealer's Manual
Clerk
Program 2
Program 3
Hourly sales
Scanning PLU
—Program 2 mode symbol
—Clerk range
—Clerk descriptor/rec-#/file-#
P
02....................
#0001 - #0010
C
01 0001-07
C
02 0002-07
C
03 0003-07
—Program 3 mode symbol
—Clerk range
—Clerk descriptor/rec-#/file-#
—Check-#/drawer-#/secret-#
—Address code 67 program
—Address code 68 program
—Address code 69 program
—Address code 70 program
P
03....................
#0001 - #0010
C
01 0001-07
000001000001
67 0000000000
68 00000000
69 000000000000
70 0000000000
C
02 0002-07
—Program 3 mode symbol
—Rec-#/file-#/time zone
P
03....................
0001-09 00:00 -> 01:00
0002-09 01:00 -> 02:00
0003-09 02:00 -> 03:00
—Program 3 mode symbol
—Scanning PLU descriptor
—Scanning PLU code
—Unit quantity/unit price
—Menu sheet No./status/link dept/
bottle link/mix & match
P
03....................
SCAN-PLU0001
#49401004
0 @10.00
0 000000 000100 0000 00
132
Program reading (P6)
Table analysis
Program 2
Program 3
Grand total
General control
Special character
—Program 2 mode symbol
—Table descriptor/rec-#/file-#
P
02....................
TBL01 0001-18
TBL02 0002-18
TBL03 0003-18
—Program 3 mode symbol
—Table descriptor/rec-#/file-#
—Program data
P
03....................
TBL01 0001-18
000000000000
TBL02 0002-18
000000000000
TBL03 0003-18
—Program 2 mode symbol
—Grand total descriptor/rec-#/file-#
P
02....................
GT1 0001-20
GT2 0002-20
GT3 0003-20
—Program 3 mode symbol
—Rec-#/file-#/program data
P
03....................
0001-22 2200000000
0002-22 0000000000
0003-22 0000000000
—Program 2 mode symbol
—Special character/rec-#/file-#
P
02....................
• @No/ ** ⁄ 0001-23
NoCT @LB *QT 0002-23
X BUSY 0003-23
133
Program 6
TE-2200/2400 Dealer's Manual
Report header
Tax table
Set menu table
Batch X/Z
Program 2
—Program 2 mode symbol
—Report header character/rec-#/file-#
P
02....................
FIX 0001-24
TRANS 0002-24
PLU 0003-24
—Program 3 mode symbol
—Rec-#/file-#
—Tax table program data
P
03....................
0001-25
TX1 12.3456%
TX1 0000
TX1 5003
—Program 3 mode symbol
—Rec-#/file-#
—Linked PLU descriptor/rec-#/file-#
P
03....................
0001-28
PLU0001 0001-04
PLU0002 0002-04
—Program 2 mode symbol
—Batch report descriptor/rec-#/file-#
P
02....................
BATCH 01 0001-29
BATCH 02 0002-29
BATCH 03 0003-29
134
Program reading (P6)
Program 3
Clerk detail link
Receipt message
Check endorsement
—Program 3 mode symbol
—Batch report descriptor/rec-#/file-#
—Execution mode/report code
—Report code
P
03....................
BATCH 01 0001-29
00 11-12-17-15-00
00-00-00-00-00
BATCH 02 0002-29
—Program 3 mode symbol
—Rec-#/file-#
—Linked total descriptor/rec-#/file-#
P
03....................
0001-30
GROSS 0001-01
0002-30
NET 0002-01
—Program 2 mode symbol
—Rec-#/file-#
—Message
P
02....................
0001-32
************************
0002-32
** LOGO MESSAGE **
—Program 2 mode symbol
—Rec-#/file-#
—Message
P
02....................
0001-33
************************
****************
0002-33
135
Program 6
TE-2200/2400 Dealer's Manual
Slip/external printer message
Arrangement table
Character recall
Non-PLU table
Check print control
—Program 2 mode symbol
—Rec-#/file-#
—Message
P
02....................
0001-34
************************
****************
0002-34
—Program 3 mode symbol
—Rec-#/file-#/arrangement table -#
—Function descriptor/key-#/function-#
P
03....................
0001-38 000001
REG1 204-000
1001-000
2002-000
DEPT01 026-051
—Program 2 mode symbol
—Rec-#/file-#
—Message
P
02....................
0001-39
************************
****************
0002-39
—Program 3 mode symbol
—Rec-#/file-#/program
P
03....................
0001-40 0000000000000000
0002-40 0000000000000000
0003-40 0000000000000000
—Program 3 mode symbol
—Rec-#/file-#/program
P
03....................
0001-41 000000
0002-41 000000
0003-41 000000
136
Program reading (P6)
Employee
Scheduler
Bottle link table
Mix & match
Program 2
Program 3
—Program 2 mode symbol
— Descriptor/rec-#/file-#
P
02....................
DISCOUNT01 0001-51
DISCOUNT02 0002-51
DISCOUNT03 0003-51
—Program 3 mode symbol
— Descriptor/rec-#/file-#
—Discount amount/status
P
03....................
DISCOUNT01 0001-51
@1.45 000003
DISCOUNT02 0002-51
—Program 3 mode symbol
—Employee name/rec-#/file-#
—Programming data
P
03....................
CSHR01 0001-061
0000000000
CSHR02 0002-061
0000000000
—Program 3 mode symbol
—Rec-#/file-#/data 1
— Data 2
— Data 3
P
03....................
0001-62 001234
000000000000000
00000000000
0002-62 002345
P
03....................
0001-73
PLU0001 0001-04
0002-73
—Program 3 mode symbol
—Rec-#/file-#
—Linked PLU descriptor/rec-#/file-#
137
Program 6
TE-2200/2400 Dealer's Manual
One touch NLU
Terminal connection table
Program 2
Program 3
Printer connection table
P
03....................
0001-77
Scanning PLU001
#1234567890123
—Program 3 mode symbol
—Rec-#/file-#
—Linked scanning PLU descriptor
—Scanning PLU code
P
02....................
MC#01 0001-91
—Program 2 mode symbol
—ID character/rec-#/file-#
—Program 3 mode symbol
—ID character/rec-#/file-#
—Program
P
03....................
MC#01 0001-91
1001
—Program 3 mode symbol
—Rec-#/file-#/program
P
03....................
0001-93 000000
0002-93 100000
0003-93 000000
Help message
—Program 2 mode symbol
—Rec-#/file-#
—Program
P
02....................
0001-85
ENTER NUMBER THEN
0002-85
PRESS <HELP> KEY.
138
Program reading (P6)
Miscellaneous message
Printing guidance message
AT command
Online password
I/O parameter table
—Program 2 mode symbol
—Rec-#/file-#
—Program
P
02....................
0001-96
AT command *************
************************
**************
0002-96
—Program 3 mode symbol
—Rec-#/file-#/program
P
03....................
0001-98 00000000000000
0002-98 00000000000000
P
02....................
GT TIME 0001-78
START DATE 0002-78
RAM 0003-78
—Program 2 mode symbol
—Message/rec-#/file-#
P
02....................
0001-79
0005-79
Direct Mainte Normal End
0006-79
—Program 2 mode symbol
—Rec-#/file-#
—Message
—Program 2 mode symbol
—Program/rec-#/file-#
P
02....................
PASSWORD 0001-97
139
Program 6
TE-2200/2400 Dealer's Manual
Registration guidance message
X/Z guidance message
Program guidance message
Error message
P
02....................
#0001
E001 0001-80
Wrong mode 0002-80
#0003
E003 0003-80
—Program 2 mode symbol
—Guidance-No. (internal use)
—Error code/rec-#/file-# (do NOT change)
—Error message/rec-#/file-#
P
02....................
#0001
Not Found PLU 0001-81
Input Unit Price 0002-81
,and Press DEPT 0003-81
key 0004-81
#0002
—Program 2 mode symbol
—Guidance No. (internal use)
—Message/rec-#/file-#
P
02....................
#0001
PLU by range 0001-82
Input start No. 0002-82
and press <#1> 0003-82
#0002
PLU by range 0001-82
Input end No. an 0004-82
—Program 2 mode symbol
—Guidance No. (internal use)
—Message/rec-#/file-#
P
02....................
#0001
Range PGM 0001-83
Input start No. 0002-83
and press <#1> 0003-83
#0002
Range PGM 0001-83
Input end No. an 0004-83
—Program 2 mode symbol
—Guidance No. (internal use)
—Message/rec-#/file-#
140
Program reading (P6)
141
Program 7
TE-2200/2400 Dealer's Manual
Auto-program & system utilities (Program 7)
Auto-programming
Using the auto-program function makes it possible to save and load the terminal program files. Methods available for
saving the terminal program are as follows:
1) Saving onto a personal computer connected through online.
2) Saving onto a CF card.
To ensure quick recovery from a corrupted file resulting from user error or system failure, it is recommended that you
maintain backup copies of current terminal programs on a file basis.
Terminal program files can be loaded using procedures opposite to those used for saving.
Note
Data except for program data and totalizer/counters, such as subtotal amount, item counter, and work area, cannot be saved
by the auto-programming function.
Never plug/unplug the CF card during auto-programming.
Auto-programming functions
The terminal is capable of saving and loading terminal program files. The terminal has the following transfer functions:
1) Copy complete terminal files (send/receive: activation by source terminal) :Command code 900
This function copies complete terminal files (except system work files) with counter and totalizers. When a file is not
reserved on the target terminal, the file is created automatically. This function is used for backing up a terminal.
2) Copy all terminal files (send/receive: activation by source terminal): Command code 090 (or 990)
This function copies all terminal files (except system work files and terminal ID No.) with counter and totalizers. When a
file is not reserved on the target terminal, the file is created automatically. This function is used for copying a terminal data
to other terminal.
3) Copy all terminal program files (send/receive: activation by source terminal): Command code 092
This function copies all terminal files (except system work files, terminal ID No., I/O parameter table file, and consecutive
No.) without counters and totalizers. When a file is not reserved on the target terminal, the processing file is skipped.
4) Copy all terminal program files with file allocation (send/receive: activation by source terminal): Command code 992
This function copies all terminal files (except system work files, terminal ID No., I/O parameter table file, and consecutive
No.) without counters and totalizers. When a file is not reserved on the target terminal, the file is created automatically.
5) Copy individual terminal program files (send/receive: activation by source terminal) Command code 0xx (xx: file No.)
This function copies the specific terminal program file (except system work files) without counters and totalizers. When the
specific file is not reserved on the target terminal, it is skipped.
6) Copy individual terminal program files with file creation (send/receive: activation by source terminal)
Command code 9xx (xx: file No.)
This function copies the specific terminal program file (except system work files) without counters and totalizers. When the
specific file is not reserved on the target terminal, it is allocated automatically.
142
Auto-programming/system utilities (P7)
Command code list
File File description Command Command Command Command
No. 900 090/990 092/992 0xx/9xx
System files
089 Consecutive number work ✔--- --- ---
091 Terminal connection table ✔✔ ✔091/991
093 Printer connection ✔✔ ✔093/993
094 Start date ✔--- --- ---
095 Initialize code ✔✔--- ---
096 AT command ✔✔ ✔096/996
097 Online password ✔✔ ✔097/997
098 I/O parameter table ✔--- --- 098/998
099 System error log ✔--- --- ---
Function and total files
001 Fixed totalizer ✔✔ ✔001/901
101 (periodic total 1) ✔✔--- ---
201 (periodic total 2) ✔✔--- ---
301 (daily consolidation) ✔✔--- ---
401 (periodic 1 consolidation) ✔✔--- ---
501 (periodic 2 consolidation) ✔✔--- ---
002 Transaction key ✔✔ ✔002/902
102 (periodic total 1) ✔✔--- ---
202 (periodic total 2) ✔✔--- ---
302 (daily consolidation) ✔✔--- ---
402 (periodic 1 consolidation) ✔✔--- ---
502 (periodic 2 consolidation) ✔✔--- ---
004 PLU ✔✔ ✔004/904
104 (periodic total 1) ✔✔--- ---
204 (periodic total 2) ✔✔--- ---
304 (daily consolidation) ✔✔--- ---
404 (periodic 1 consolidation) ✔✔--- ---
504 (periodic 2 consolidation) ✔✔--- ---
005 Department ✔✔ ✔005/905
105 (periodic total 1) ✔✔--- ---
205 (periodic total 2) ✔✔--- ---
305 (daily consolidation) ✔✔--- ---
405 (periodic 1 consolidation) ✔✔--- ---
505 (periodic 2 consolidation) ✔✔--- ---
006 Group ✔✔ ✔006/906
106 (periodic total 1) ✔✔--- ---
206 (periodic total 2) ✔✔--- ---
306 (daily consolidation) ✔✔--- ---
406 (periodic 1 consolidation) ✔✔--- ---
506 (periodic 2 consolidation) ✔✔--- ---
009 Hourly sales ✔✔ ✔009/909
109 (periodic total 1) ✔✔--- ---
209 (periodic total 2) ✔✔--- ---
309 (daily consolidation) ✔✔--- ---
409 (periodic 1 consolidation) ✔✔--- ---
509 (periodic 2 consolidation) ✔✔--- ---
010 Monthly sales ✔✔--- ---
110 (periodic total 1) ✔✔--- ---
210 (periodic total 2) ✔✔--- ---
310 (daily consolidation) ✔✔--- ---
410 (periodic 1 consolidation) ✔✔--- ---
510 (periodic 2 consolidation) ✔✔--- ---
018 Table analysis ✔✔ ✔018/918
118 (periodic total 1) ✔✔--- ---
218 (periodic total 2) ✔✔--- ---
318 (daily consolidation) ✔✔--- ---
143
Program 7
TE-2200/2400 Dealer's Manual
File File description Command Command Command Command
No. 900 090/990 092/992 0xx/9xx
418 (periodic 1 consolidation) ✔✔--- ---
518 (periodic 2 consolidation) ✔✔--- ---
020 Grand total ✔✔ ✔020/920
320 (daily consolidation) ✔✔--- ---
Check files
015 Check Index ✔✔--- ---
056 Separate check buffer ✔✔--- ---
060 Check detail ✔✔--- ---
Clerk files
007 Clerk ✔✔ ✔007/907
030 Clerk detail link ✔✔ ✔030/930
011 Clerk detail ✔✔--- ---
111 (periodic total 1) ✔✔--- ---
211 (periodic total 2) ✔✔--- ---
311 (daily consolidation) ✔✔--- ---
411 (periodic 1 consolidation) ✔✔--- ---
511 (periodic 2 consolidation) ✔✔--- ---
Time & attendance files
019 Time & attendance ✔✔--- ---
Scanning PLU files
016 Scanning PLU ✔✔ ✔016/916
040 Non PLU table ✔✔ ✔040/940
051 Mix & match table ✔✔ ✔051/951
151 (periodic total 1) ✔✔--- ---
251 (periodic total 2) ✔✔--- ---
351 (daily consolidation) ✔✔--- ---
451 (periodic 1 consolidation) ✔✔--- ---
551 (periodic 2 consolidation) ✔✔--- ---
070 Batch maintenance PLU ✔✔ ✔070/970
071 Direct maintenance PLU ✔✔--- ---
076 Scanning PLU index ✔✔ ✔016/916
077 One touch NLU table ✔✔ ✔077/977
Arrangement file
038 Arrangement table ✔✔ ✔038/938
Program / message / buffer files
022 General control ✔✔ ✔022/922
023 Special character ✔✔ ✔023/923
024 Report header ✔✔ ✔024/924
025 Tax table ✔✔ ✔025/925
028 Set menu table ✔✔ ✔028/928
029 Batch X/Z ✔✔ ✔029/929
032 Receipt/slip message ✔✔ ✔032/932
033 Endorse message ✔✔ ✔033/933
034 Slip/external printer message ✔✔ ✔034/934
036 Registration buffer ✔✔--- ---
039 Character recall ✔✔ ✔039/939
041 Check print ✔✔ ✔041/941
046 Character key table ✔✔ ✔046/946
047 Graphic logo *1 ✔✔ ✔047/947
049 External printer print buffer ✔✔--- ---
062 Scheduler ✔✔ ✔062/962
068 Watermark print ✔✔ ✔068/968
073 Bottle link table ✔✔ ✔073/973
074 Key table ✔✔ ✔074/974
078 Miscellaneous message ✔✔ ✔078/978
079 Printing guidance message ✔✔ ✔079/979
080 Error message ✔✔ ✔080/980
144
Auto-programming/system utilities (P7)
From CF card
67s620s66a
66s
8
PGM
Mode switch
File selection by
the cursor keys
(Cancellation)
(Execution)
Cursor keys
TE-2200 TE-2400
Auto-programming operation
To CF card
67s670s6
:::
a6
::
-6a
66s
8
PGM
Mode switch
* File name
(file name:8 + suffix: 3)
(Cancellation)
(Execution)
* File name: You can use only the capital alphabet (A ~ Z), numeric (0. 1 ~ 9) and minus sign.
Note: You cannot overwrite the same file name.
If there is no enough room for auto-program delete other files in the CF card or format it.
If you use the CF card for the first time, format it.
Command code
~
Default file name
5029 023 017
4028 022 015
3027 014 016
2026 020 021
1025 019 013
025 023 019
024 022 018
021 017
020 015
014 016
9
6
3
Up cursor key
Down cursor key Up cursor key
Down cursor key
File File description Command Command Command Command
No. 900 090/990 092/992 0xx/9xx
081 Registration guidance message ✔✔ ✔081/981
082 X/Z guidance message ✔✔ ✔082/982
083 Program guidance message ✔✔ ✔083/983
085 Help message ✔✔ ✔085/985
086 Slip print buffer ✔✔--- ---
145
Program 7
TE-2200/2400 Dealer's Manual
Other utilities
Issuing system error log report
Report sample
---------(1033)---------
GT TIME 003783
START DATE 04-03-2006
------------------------
01 0001 0001 000505
1058 0102
02 0000 0000 000000
0000 0000
03 0000 0000 000000
0000 0000
—Total working time
—Start date
—Rec-#/job No./error code (Refer to the appendix.)/date
—Time/destination terminal ID
67s61033s
PGM
Mode switch
146
Auto-programming/system utilities (P7)
Issuing CF card directory report
---------(1170)---------
001 PGM 1000.090
10,953
04-30-2004 12:34
002 FILE0001.090
1,024
04-30-2004 12:34
------------------------
—Title
—Auto-programming title
—Index capacity
—Date/time
—Auto-programming file name
—File capacity
Cf. The meaning of file name: FILEnnnn.mmm
nnnn: file number, mmm: auto-programming command code
Report sample
Formatting of CF card
67s61170s
PGM
Mode switch
67s60270s6a
6s
PGM
Mode switch
(Cancellation)
(Execution)
Deleting a file from CF card
67s630s66a
66s
8
PGM
Mode switch
File selection by
the cursor keys
(Cancellation)
(Execution)
Cursor keys
TE-2200 TE-2400
3
6030 024 018
3
5029 023 017
3
4028 022 015
3
3027 014 016
026
025 023 019
024 022 018
021 017
020 015
9
6
RECEIPT
FEED
JOURNAL
FEED
Up cursor key
Down cursor key Up cursor key
Down cursor key
147
Program 7
TE-2200/2400 Dealer's Manual
Set the AT command to MODEM
Before executing this command, you should connect a MODEM.
---------(4310)---------
Modem set
------------------------
AT&V
ACTIVE PROFILE:
Normal End
—Modem response
Report sample
67s62310s
PGM
Mode switch
67s64310s6a
6s
PGM
Mode switch
(Cancellation)
(Execution)
67s64350s6a
6s
PGM
Mode switch
(Cancellation)
(Execution)
Set the AT command to default value
Set the graphic logo to the external printer
Before executing this command, you should connect UP-350.
148
Auto-programming/system utilities (P7)
149
Manager operation
TE-2200/2400 Dealer's Manual
Manager operation
This section describes modes and operations that are generally used by management only. Besides user programming
procedure, it also describes how to perform clerk assignments for clerk interrupt function and set stock quantities.
Manager control mode (X1 mode)
Manager control consists of the six operations listed below. Access to these operations can be restricted by password that
makes it impossible to perform operations unless the correct password is input.
•Drawer assignments for each clerk (when optional multi-drawer system is used)
•Stock quantity maintenance
•Clerk assignment for clerk interrupt function
•Clerk number to clerk number key
•Programming for the Euro
•Programming for Australian GST
•Program 1 programming (programming unit prices for department keys, PLUs; programming unit prices, rates, times, dates
for function keys)
•Master re-connection
•Resetting the busy flag
Entering the manager control mode
Procedure
1. If the register has no password for the manager mode, you need not to enter it.
2. Press the clerk number key if you want the password you input not to appear on the display.
3. An error occurs if you try to enter the manager control mode without inputting a password (when one is programmed), or if
the password you input does not match the one programmed for the register.
To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this section.
Assign drawers for each clerk
Procedure (by clerk button)
Procedure (by clerk code)
Note:
1. Each clerk can be assigned a drawer when optional multi-drawer system is being used.
2. Input a 4-digit clerk number (0001 ~ 9999) that identifies the clerk you want to assign the drawer to.
6o6
::::
6k6
X1
Mode switch
MGR
Password (4-digit)
66:6r
6:6:::: 6r
MGR
MGR
Sign on by clerk button
Drawer assignment
Drawer 1 = 0, 1
Drawer 2 = 2
Drawer assignment
Drawer 1 = 0, 1
Drawer 2 = 2
Clerk No.
150
Manager operation
Stock quantity maintenance (PLU/flat PLU/scanning PLU)
You can make changes in actual stock quantities for PLU using the procedures described in this section.
To add to the actual stock quantity of a PLU/flat PLU/scanning PLU
Procedure for PLU
Procedure for flat PLU
To subtract from the actual stock quantity of a PLU/flat PLU/scanning PLU
Procedure for PLU
Procedure for flat PLU
Procedure for scanning PLU
Scanning PLU code
Procedure for scanning PLU
Added value
62s6::+6::6a6s
62s6B6::6B6s
62s6
::6®6::a
6s
::6
MGR
~
PLU No./random code
~
Added value
To a new PLU
To the next PLU
Same value to
the next PLU
MGR
To a new flat PLU
Same value to
the next PLU
MENU
SHIFT Flat-
PLU
~
To a new scanning PLU
MGR
Scanning
B
OTN
Added value
~
~
~
Added value
62s6::+6R6::6a6s
62s6B6R6::6B6s
62s6R6::®6::a6s
::6
MGR
PLU No./random code Subtracted value
To a new PLU
Same value to
the next PLU
To the next PLU
~~
MGR
To a new flat PLU
Same value to
the next PLU
MENU
SHIFT Flat-
PLU
Subtracted value
~
MGR
Scanning
B
OTN
Subtracted value
~
Scanning PLU code
To a new scanning PLU
~
Subtracted value
~
151
Manager operation
TE-2200/2400 Dealer's Manual
To input the new stock quantity of a PLU/flat PLU
Procedure for PLU
Procedure for flat PLU
Clerk assignment
Linking a clerk to a clerk interrupt buffer enables clerk interrupt while a transaction is in progress.
To link clerk button/key to interrupt buffers
Procedure
To link clerk secret numbers to interrupt buffers
Procedure
To link clerk numbers to clerk number keys
Procedure
Note:
To clear the programming, enter “000000.”
600 6::::6o6s
MGR
To other clerk
Clerk No. (4 digits)
66::6|
x
6::6:::: 66s
|
x
MGR
MGR
Sign on by clerk button/key
Check No. for clerk interrupt
(Max. 6 digits)
To other clerk
}
{
~
}
{
Check No. for
clerk interrupt
(Max. 6 digits)
~
Clerk No. (4 digits)
Procedure for scanning PLU
68s6::+6::6a6s
68s6B6::6B6s
68s6::6®6::a6s
::6
MGR
PLU No./random code Adjusted value
To a new PLU
Same value to
the next PLU
To the next PLU
~~
MGR
To a new flat PLU
Same value to
the next PLU
Adjusted value
~
MENU
SHIFT Flat-
PLU
MGR
Scanning
B
OTN
~
Scanning PLU code Adjusted value
To a new scanning PLU
~
Adjusted value
~
152
Manager operation
Programming for the Euro
This procedure is used for defining main/sub currency, currency exchange rate for the Euro, and drawer number for sub
currency at the same time. Please follow the guidance receipts issued in each time during this procedure.
General procedure
Data (Currency definition type)
6:::::: 6a6 :66a
6 s
s
Type 1 procedure
Type 2 procedure
Description Choice Program code
Currency definition type * :
Main = local, sub = Euro, change = local .............. 1
Main = local, sub = Euro, change = Euro .............. 2
Main = Euro, sub = local, change = Euro .............. 3
Euro only (No sub currency) .................................. 4
Significant
number :
D1
* Once you have chosen one of these numbers, do NOT select the smaller number of the type.
601072002s6 a6
6
:
a66
6
6
6
s
refer to type 1 procedure
refer to type 2 procedure
refer to type 3 procedure
refer to type 4 procedure
(enter “1”)
(enter “2”)
(enter “3”)
(enter “4”)
Guidance
message
Guidance
message Guidance
message
Currency definition type
(1 ~ 4)
MGR
Abortion:
Note: After this operation, the Init 2 (Memory all clear except the program area) is automatically performed.
Guidance
message Result
printing
Drawer No.
(Cancellation)
(Execution)
Currency conversion rate
Abortion:
6:::::: 6a6:66 a
6s
s
Abortion:
Guidance
message Result
printing
Drawer No.
(Cancellation)
(Execution)
Currency conversion rate
* This step is skipped, if the rate had been already set.
153
Manager operation
TE-2200/2400 Dealer's Manual
Type 3 procedure
Type 4 procedure
Data (Currency conversion rate)
Data (Drawer number for sub currency)
Date (Unit price conversion to Euro)
Automatic execution of this procedure on the preset date/time
You can execute this Euro switchover procedure automatically by using arrangement and scheduler.
Please refer to the programming example on page 184.
Description Choice Program code
Currency exchange rate: (6 digit with decimal point key)
example: 1 Euro = DM 1.95583 Significant
numbers ::::::
D6D5D4D3D2D1
Description Choice Program code
Cash drawer number of sub currency: 0 - 2
(“0” means main drawer)
Significant
number :
D1
Description Choice Program code
All unit price (department, PLU, flat-PLU, scanning PLU) are
converted in Euro.
Note: All unit price/rate of the following function keys (<CASH>,
<CHECK>, <NB>, <+>, <–>, <COUPON>) are set to zero.
Yes = 0
No = 1 :
D1
6::::::6a6:6a66 :6a
6s
s
Abortion:
Guidance
message Result
printing
(Cancellation)
(Execution)
Currency conversion rate
* This step is skipped, if the rate had been already set.
Guidance
message
Drawer No. Unit price
conversion
6:::::: 6a66 :66a
6s
s
Abortion:
Guidance
message Result
printing
(Cancellation)
(Execution)
Currency conversion rate
* This step is skipped, if the rate had been already set.
Unit price
conversion
*The unit price conversion is skipped,
if the Euro had been used as main currency.
154
Manager operation
Programming for the Australian GST
This procedure is used for defining
•Tax symbol (*) is printed.
•Taxable amount (receipt) is skipped.
•“GST INCLUDED” is set to the TX1 descriptor.
•“TAXABLE AMT” is set to the TA1 descriptor.
•Total line is printed even in direct (cash) sales.
•Australian rounding is set.
•“$” is set to the monetary symbol.
•Print “MOF message” on receipt.
•Tax (10% tax rate, add-in tax, fraction rounding off) is set to the tax table 1. No data is set to other tax tables.
•The taxable amount and tax amount except TA1/TX1 are not printed on fixed totalizer report.
•“RND/ST” is set to the subtotal descriptor for display.
• After subtotal, both “rounded ST” and “not rounded ST” are displayed.
at the same time.
Procedure
Programming of items in the program 1 mode
Use the manager control mode to program the items in the program 1 mode. These items can be preset to prohibit program-
ming by manager control mode. The following is a list of items that you can program using the manager control mode.
•Unit prices for departments, and PLUs
• Unit prices for the plus, minus, coupon keys
•Second unit price for PLU
•Percentage for discount/premium key
•Rate or amount service charge for check cashing using the check tender key
•Rate or amount service charge for temporary finalization using the new balance key
•Date
•Time
•Currency exchange rate for currency exchange key
•Rate tax
•Scanning PLU direct maintenance
To enter the program 1 mode
1. The register enters the program 1 mode at this point. You do not need to change the mode switch to the program position.
2. Perform program 1 programming as explained in the programming manual.
To exit the program 1 mode
Change the position of the mode control key to another setting (REG1/2, RF, OFF, Z1, X2/Z2 or PGM).
This procedure cancels program 1 mode of manager control (X1) mode.
601012001s66a
6s
MGR
(Cancellation)
(Execution)
61
s
6
X1
Mode switch
PGM1
155
Read/reset report
TE-2200/2400 Dealer's Manual
Read/reset report issuance
Preparation for issuing report
Money declaration
There are two ways to declare the money in drawer amount; money declaration in the REG1/REG2/RF mode or money
declaration in the X1/Z1 mode. Both declarations release “money declaration compulsory.”
Money declaration in the REG1/REG2/RF modes
The register stores the declaration amount, declaration over and declaration short totalizers for each payment medium, and
you can issue reports in the status of each totalizer.
Password (X2/Z2 mode)
Without entering password of X2/Z2 mode, an error will occur if it is programmed.
•Declaration amount: Stores declared amount (added in the REG1/2, subtracted in RF).
•Declaration over: Stores difference between declared amount and in drawer amount if declared amount is greater than the
in drawer amount.
•Declaration short: Stores difference between declared amount and in drawer amount if declared amount is less than the in
drawer amount.
Money declaration in the X1/Z1 modes
Press the clerk number key if you want the password you input not to appear on the display.
Issuing read/reset report
•The formats of read reports are similar to those of reset reports, except that the reset reports contain the symbol “Z” and the
non-resettable number of resets at the top. Also, the non-resettable grand total is printed on the fixed totalizer reset report.
•If money declaration is programmed as compulsory, you must input an amount before you can perform read or reset
operations, otherwise an error will occur.
•“*” is printed on the left side of the “X or Z” symbol on the read or reset report if an overflow occurs in any of the counters
or totalizers.
•A report header message (report title) that indicates the report code and report contents is printed in the header line of each
report. The report header message is programmable up to maximum of 12 characters. Note that the report header is pro-
grammable for each totalizer file or for batch X/Z report file record, not for each report code.
6P6::6
b
N
n
X1/Z1
Mode switch
{
Sub currency Amount
(Max. 10-digits)
~
6 o6:::: 6
k
X2/Z2
Mode switch
Password (4-digits)
6B66 P6
::
66B
a
h
k
c
B
REG1/2
RF
Mode switch
}{
Sub currency Amount
(Max. 10-digits)
~
DECLA DECLA
CR4
:
156
Read/reset report
Programmability
Report issuance can be programmed with the following features:
•Suppress printing of zero total lines.
•Money declaration compulsory
•Report header message (report title)
• Print sales ratio
•Suppress printing of grand total
•Print two copies of the fixed total reset report.
•Print PLU number/random PLU codes on the PLU report and individual report.
• Clear (reset) actual stock quantity when the stock reset report programmed in a batch report is issued.
•Printing control for totalizers and counters in the fixed total report
• Start time period for the hourly sales and hourly item report
•Print the monthly sales average amount on the monthly sales report.
Issuing procedure
The following procedures are available for issuing reports:
• Individual read/reset report issuance.
• PLU/scanning PLU range read/reset report issuance
•Report code input for individual files for read/reset report issuance
•Batch read/reset report issuance for string report
•File reset (clear totalizers/counters) with no report
Individual report
• Finance report
• Individual item/key report
• Individual clerk/PLU by group, dept./PLU stock by group, dept. report
6|
x
X1
Mode switch
{
66 B6BB 66s
6::6 +6
6B6B6
6B6B6
6: :6 B6
66
6091a
X1
Mode switch
Z1
Mode switch
PRICE
SHIFT
~
~
MENU
OBR
Flat-
PLU
NLU
Trans-
action Dept
MENU
PLU No./random code
OBR code
Scanning
Note: Press s to terminate
this procedure.
/
6: :a6: :a6s
X1/Z1
X2/Z2
Mode switch
Report code
Note: Press s to terminate this procedure.
Target No.
~~
157
Read/reset report
TE-2200/2400 Dealer's Manual
• Individual open check report
Range report
• PLU range report
• Scanning PLU range report
Report code (Read: #=0 / Reset: # = 1)
Report name Consolidation file Target-No.
Daily Periodic 1 Periodic 2 Daily Periodic 1 Periodic 2
Clerk individual 20017 2#117 2#217 20317 2#417 2#517 Clerk-No.
PLU individual by group 1020014 102#114 102#214 1020314 102#414 102#514 Group-No.
PLU individual by department 2020014 202#114 202#214 2020314 202#414 202#514 Department-No.
PLU stock individual by group 1020064 ----- ----- ----- ----- ----- Group-No.
PLU stock individual by department 2020064 ----- ----- ----- ----- ----- Department-No.
6025a66 a66 s
6: :6 a6
6: :6 6
B
B
B
X1
Mode switch
~
~
Note: Press s to terminate this procedure.
Clerk rec-#
Check No.
}{
NEW
CHK
OLD
CHK
(All)
(By clerk)
(By check No.)
NEW/
OLD
6: :a6: :6a6: :6a
X1/Z1
X2/Z2
Mode switch
Report code
Note: Press s to terminate this procedure.
Start No. *1 End No. *2
*1 If you skip to enter the start No., it starts the first record No./random code.
*2 If you skip to enter the end No., it starts the last record No./random code.
~
~
~
158
Read/reset report
Individual file report
Report code (Read: #=0 / Reset: # = 1)
Report name Consolidation file Target-No.
Daily
Periodic 1 Periodic 2
Daily
Periodic 1 Periodic 2
Start number End number
PLU range by record number 10014 1#114 1#214 10314 1#414 1#514 Start rec-No. End rec-No.
PLU range by random code 10014 1#114 1#214 10314 1#414 1#514 Start random code End random code
PLU stock range by record number 10064 ----- ----- 10364 ----- ----- Start rec-No. End rec-No.
PLU stock range by random code 10064 ----- ----- 10364 ----- ----- Start random code End random code
Scanning PLU by range group 1000026 ----- ----- ----- ----- ----- Start group-No. End group-No.
Scanning PLU by range department 2000026 ----- ----- ----- ----- -----
Start department-No. End department-No.
Scanning PLU best 50 by range department 80026 ----- ----- ----- ----- -----
Start department-No. End department-No.
Scanning PLU inactive item by range department
90026 ----- ----- ----- ----- -----
Start department-No. End department-No
Scanning PLU stock by range group 1000065 ----- ----- ----- ----- ----- Start group-No. End group-No.
Scanning PLU stock by range department 2000065 ----- ----- ----- ----- -----
Start department-No. End department-No.
Report code (Read: #=0 / Reset: # = 1)
Report name Consolidation file
Daily Periodic 1 Periodic 2 Daily Periodic 1 Periodic 2
Fixed totalizer 11 #111 #211 311 #411 #511
Transaction key 12 #112 #212 312 #412 #512
PLU by record number/random code (all) 14 #114 #214 314 #414 #514
best 50 (amount order) 60014 60114 60214 60314 60414 60514
best 50 (quantity order) 70014 70114 70214 70314 70414 70514
by group 24 #124 #224 324 #424 #524
menu (1st) (except TE-2200) 81 #181 #281 381 #481 #581
menu (2nd) (except TE-2200) 82 #182 #282 382 #482 #582
menu (3rd) (except TE-2200) 83 #183 #283 383 #483 #583
menu (4th) (except TE-2200) 84 #184 #284 384 #484 #584
menu (5th) (except TE-2200) 85 #185 #285 385 #485 #585
menu (6th) (except TE-2200) 86 #186 #286 386 #486 #586
PLU stock all PLU by record number 64 ----- ----- ----- ----- -----
by group 34 ----- ----- ----- ----- -----
Department 15 #115 #215 315 #415 #515
best 50 (amount order) 60015 60115 60215 60315 60415 60515
best 50 (quantity order) 70015 70115 70215 70315 70415 70515
Group 16 #116 #216 316 #416 #516
Clerk 17 #117 #217 317 #417 #517
Hourly sales 19 #119 #219 319 #419 #519
Monthly sales 20 #120 #220 320 #420 #520
Open check 25 ----- ----- ----- ----- -----
total only 40025 ----- ----- ----- ----- -----
Scanning PLU by range department (all) 26 ----- ----- ----- ----- -----
Scanning PLU stock by range department (all)
65 ----- ----- ----- ----- -----
Table analysis 28 #128 #228 328 #428 #528
Mix & match 61 #161 #261 361 #461 #561
Time & attendance 29 ----- ----- ----- ----- -----
6: :a
X1/Z1
X2/Z2
Mode switch
Report code
~
159
Read/reset report
TE-2200/2400 Dealer's Manual
Batch report
Report name Report code
Daily Periodic 1 Periodic 2
PLU reset (no report) 50014 51114 51214
Scanning PLU reset (no report) 50026 ----- -----
Scanning PLU stock reset (no report) 50065 ----- -----
6: :a
Z1
X2/Z2
Mode switch
Report code
~
6:::: 6a
::::
File reset
The value (record No. of the batch X/Z file - 1)
In X1 mode,
“Issue daily file report” = 00
“Issue consolidation file report” = 03
In Z1 mode,
“Issue daily file report” = 00
“Issue consolidation file report” = 03
In X2/Z2 mode,
“Issue periodic 1/2 read/reset file report” = 00
(Read/reset and periodic 1/2 are the dependent upon the control flag of the batch X/Z file.)
“Issue periodic 1 file read report” = 01
“Issue periodic 1 file reset report” = 11
“Issue periodic 2 file read report” = 02
“Issue periodic 2 file reset report” = 12
“Issue periodic 1 consolidation file read report” = 04
“Issue periodic 1 consolidation file reset report” = 14
“Issue periodic 2 consolidation file read report” = 05
“Issue periodic 2 consolidation file reset report” = 15
X1/Z1
X2/Z2
Mode switch
Report code
D4D3D2D1
D4D3D2D1
Note: If you skip to enter the report code, the 1st batch X/Z is executed.
160
Read/reset report
Report sample
Financial report
—X1 mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
— Report header/title
—Report code
—Declared amount of main currency
—
Difference between declared amount and accumulated amount
—Declared amount of sub currency
—
Difference between declared amount and accumulated amount
—Gross character/gross quantity
—Gross amount
—Net character/net count
—Net amount
—Cash in drawer of main currency
—Declared cash in drawer amount of main currency
—Declared short cash amount
—Cash in drawer of sub currency
— Declared cash in drawer of sub currency
—Declared cash in drawer amount of sub currency
—Food stamp in drawer
—EBT total in drawer
Individual item/key report
—X1 mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
— Report header/title
—PLU character/quantity
—Sales ratio/amount
—Old price total
—Red price total
—Discount total
—PLU code (4-digit) or Random code (6-digit)
—Scanning PLU character/quantity
—Sales ratio/amount
—Scanning PLU code
—Key descriptor/counter
—Amount
— Key descriptor/quantity
—Sales ratio/amount
—Old price total
—Red price total
—Discount total
—Quantity total
—Amount total
—Red price total
—Discount total
X 03-04-2006 19:00
C
01 MC#01 000001
X FLASH
0000071
DECLA $13,575.07
-1.36
EURO MONEY ⁄26.33
-1.73
GROSS 2734.973
$15,362.37
NET No 846
$13,601.80
CAID $13,576.43
CATL $13,575.07
CA- -1.36
CAID2 ⁄28.06
CATL2 ⁄26.33
CA- -1.73
CR+ 2 $1.29
FSID $4.63
EBTTL -4.63
X 03-04-2006 19:05
C
01 MC#01 000002
X INDIVIDUAL
PLU0001 83.933
25.27% $1,373.39
OLD PRC $26.35
RED PRC $18.98
DISCOUNT $56.37
#000001
SCAN-PLU0001 108
6.10% 76.89
#49012345678904
CASH No 12
$240.43
DEPT01 15
10% $780.92
OLD PRC $29.08
RED PRC $25.33
DISCOUNT $30.16
------------------------
TL 207.933
$2,871.63
RED PRC $44.31
DISCOUNT $86.53
161
Read/reset report
TE-2200/2400 Dealer's Manual
Fixed total report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Declared amount of main currency
—
Difference between declared amount and accumulated amount
—Declared amount of sub currency
—
Difference between declared amount and accumulated amount
—Gross character/gross quantity
—Gross amount
—Net character/net count
—Net amount
—Cash in drawer of main currency
—Declared cash in drawer amount of main currency
—Declared short cash amount
—Cash in drawer of sub currency
— Declared cash in drawer of sub currency
—Declared cash in drawer amount of sub currency
—Food stamp in drawer
—EBT total in drawer
—Refund mode count
—Refund mode total
—Customer count
—Average sales amount per customer
—Check cashing service fee total
—New balance fee
—Clerk commission 1 total
—Clerk commission 2 total
—Foreign currency cash in drawer 1
—Foreign currency check in drawer 1
—Reduction total
—Coupon total
—Item return total
—Clear count
—Rounding total of sub currency
—Rounding total of main currency
—Cancellation count
—Cancellation total
—Declaration count
—Taxable amount 1 total
—Tax amount 1 total
—Nontaxable amount
—Grand total 1
—Grand total 2
—Grand total 3
—Consecutive number range of the day
Z 03-04-2006 19:10
C
01 MC#01 012343
Z FIX 0001
0001011
DECLA $13,575.07
-1.36
EURO MONEY ⁄26.33
-1.73
GROSS 2734.973
$15,362.37
NET No 846
$13,601.80
CAID $13,576.43
CATL $13,575.07
CA- $1.36
CAID2 ⁄28.06
CATL2 ⁄26.33
CA- $1.73
CR+ 2 $1.29
FSID $4.63
EBTTL -4.63
------------------------
RF No 1
$10.25
CUST CT 123
AVRG $110.58
FEE $2.73
+$10.25
C-1 $2.38
C-2 $57.46
CECA1 ¥12,793
CECK1 ¥1,000
CECK4 DM12.56
DC $95.96
COUPON $10.26
REF $7.68
CLEAR 866
ROUND ⁄2.55
ROUND $6.37
CANCEL No 6
$7.36
DECLA No 4
------------------------
TA1 $1,364.76
TX1 $136.48
EX10 $487.58
NON TAX $9.75
------------------------
GT1 $00000000462846.73
GT2 $00000000645230.72
GT3 $00000000449096.81
011462--->012343
162
Read/reset report
Transaction key report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Cash count
—Cash total
—Charge count
—Check print count
—Void total
—Validation count
—Store count
—Recall count
Transaction keys are printed by function code order.
Z 03-04-2006 19:15
C
01 MC#01 000004
Z TRANS 0001
0001012
CASH No 846
$13,601.80
CH No 12
$31.80
CHKP No 1
VOID No 4
$64.48
VLD No 3
RCT No 18
STORE No 23
RECALL No 23
163
Read/reset report
TE-2200/2400 Dealer's Manual
PLU report
All PLU/range/menu report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—PLU range (range report only)
—PLU character/quantity
—Sales ratio/amount
—Old price total
—Red price total
—Discount total
—PLU code (4-digit) or Random code (6-digit)
—Quantity total
—Amount total
—Red price total
—Discount total
GROUP01 ..........01
PLU0001 83.933
25.27% $1,373.39
OLD PRC $26.35
RED PRC $18.98
DISCOUNT $56.37
#000001
------------------------
83.933
$1,373.39
RED PRC $26.35
DISCOUNT $56.37
........................
PLU0101 9
12.27% $389.80
OLD PRC $6.35
RED PRC $1.98
DISCOUNT $9.37
#000101
------------------------
9
$389.80
RED PRC $1.98
DISCOUNT $9.37
—Classification title (by group/dept.)
—PLU character/quantity
—Sales ratio/amount
—Old price total
—Red price total
—Discount total
—PLU code (4-digit) or Random code (6-digit)
—Total column of this classification
—Not classified items
—Total column of not classified items
By group/department report
—Quantity total
—Amount total
—Red price total
—Discount total
Z 03-04-2006 19:25
C
01 MC#01 000006
Z PLU 0001
0001014
#000001 - #000500
PLU0001 83.933
25.27% $1,373.39
OLD PRC $26.35
RED PRC $18.98
DISCOUNT $56.37
#000001
PLU0003 23
4.37% $63.44
DISCOUNT $0.00
#000500
------------------------
TL 207.933
$2,871.63
RED PRC $44.31
DISCOUNT $86.53
------------------------
TL 207.933
$2,871.63
RED PRC $44.31
DISCOUNT $86.53
164
Read/reset report
Best 50 report
PLU stock report
All PLU/range report
—Ranking
—PLU character/quantity
—Sales ratio/amount
—Old price total
—Red price total
—Discount total
—PLU code (4-digit) or Random code (6-digit)
—Quantity total
—Amount total
—Red price total
—Discount total
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
— Report header/title
—Report code
—PLU range (range report only)
—PLU character/optimum stock quantity
—Current stock quantity
—PLU code (4-digit) or Random code (6-digit)
—* means out of optimum stock quantity
1..........
PLU0001 83.933
25.27% $1,373.39
OLD PRC $26.35
RED PRC $18.98
DISCOUNT $56.37
#000001
2..........
PLU0050 67
21.19% $1,152.06
OLD PRC $66.75
RED PRC $38.96
DISCOUNT $43.37
#000045
50.........
PLU0038 3
6.87% $373.39
OLD PRC $2.57
RED PRC $7.64
DISCOUNT $8.37
#000038
------------------------
TL 207.933
$2,871.63
RED PRC $44.31
DISCOUNT $86.53
Z 03-04-2006 19:30
C
01 MC#01 000008
Z PLU STOCK
0001064
#000001 - #000500
PLU0001 10
73
#000001
PLU0002 * 10
3
#000002
165
Read/reset report
TE-2200/2400 Dealer's Manual
By group/department report
—Classification title (by group/dept.)
—PLU character/optimum stock quantity
—Current stock quantity
—PLU code (4-digit) or Random code (6-digit)
—* means out of optimum stock quantity
Department report
All department report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Department character/quantity
—Sales ratio/amount
—Old price total
—Red price total
—Discount total
—quantity total
—Amount total
—Red price total
—Discount total
GROUP01 ..........01
PLU0001 15
73
#000001
PLU0002 * 15
3
#000002
GROUP02 ..........02
PLU0010 30
73
#000010
PLU0011 20
23
#000011
Z 03-04-2006 19:30
C
01 MC#01 000007
Z DEPT 0001
0001015
DEPT01 83.933
25.27% $1,373.39
OLD PRC $26.35
RED PRC $18.98
DISCOUNT $56.37
DEPT02 23
4.37% $63.44
DISCOUNT $0.00
------------------------
TL 207.933
$2,871.63
RED PRC $44.31
DISCOUNT $86.53
166
Read/reset report
Best 50 report
—Ranking
—Department character/quantity
—Sales ratio/amount
—Old price total
—Red price total
—Discount total
—Quantity total
—Amount total
—Red price total
—Discount total
Group report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Group character/quantity
—Sales ratio/amount
—Quantity total
—Amount total
1..........
DEPT01 83.933
25.27% $1,373.39
OLD PRC $26.35
RED PRC $18.98
DISCOUNT $56.37
2..........
DEPT50 67
21.19% $1,152.06
OLD PRC $66.75
RED PRC $38.96
DISCOUNT $43.37
50.........
DEPT38 3
6.87% $373.39
OLD PRC $2.57
RED PRC $7.64
DISCOUNT $8.37
------------------------
TL 207.933
$2,871.63
RED PRC $44.31
DISCOUNT $86.53
Z 03-04-2006 19:35
C
01 MC#01 000008
Z GROUP 0001
0001016
GROUP01 83.933
25.27% $1,373.39
GROUP02 23
4.37% $63.44
GROUP03 45
4.37% $65.44
------------------------
TL 207.933
$2,871.63
167
Read/reset report
TE-2200/2400 Dealer's Manual
Clerk report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Declared amount of main currency
—
Difference between declared amount and accumulated amount
—Declared amount of sub currency
—
Difference between declared amount and accumulated amount
—Clerk (manager) name/drawer No.
—Gross character/gross count
—Gross amount
—Net character/net count
—Net amount
—Cash in drawer
—Charge in drawer
—Check in drawer
—Credit in drawer
—Refund mode total
—Commission amount
—Clear total
—Separator between manager and cashier
—Clerk (cashier) name/drawer No.
—Separator between cashier and clerk
—Clerk name/drawer No.
Z 03-04-2006 19:10
C
01 MC#01 000008
Z CASHIER 0001
0001017
DECLA $13,575.07
-1.36
EURO MONEY ⁄26.33
-1.73
C
01 ...........1
GROSS 2734.973
$15,362.37
NET No 846
$13,601.80
CAID $13,576.43
CHID $4.87
CKID $273.97
CRID $28.06
RF No 1
$10.00
C-1 $3.09
C-2 $8.93
CLEAR No 325
------------------------
C
02 ...........1
GROSS 734
$7,362.37
NET No 346
$8,601.80
CLEAR No 315
------------------------
C
05 ...........1
GROSS 34
$362.37
NET No 26
$501.80
CLEAR No 15
168
Read/reset report
Hourly sales report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Time frame
—Customer count
—Gross total
—Net count
—Sales ratio/Net amount
—Customer count total
—Gross amount total
—Net count total
—Net amount total
Monthly report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Day
—Gross count
—Gross total
—Net count
—Net amount
—Gross count total
—Gross amount total
—Average gross sales total
—Net count total
—Net amount total
—Average net sales total
Z 03-04-2006 19:45
C
01 MC#01 000010
Z HOURLY 0001
0001019
00:00->01:00
CT 12
GROSS $1,373.39
NET No 12
10.67% $1,373.39
01:00->02:00
CT 26
GROSS $4,253.64
NET No 12
2.67% $343.55
------------------------
TL CT 4357
GROSS $12,871.63
NET No 3674
$12,881.00
Z 03-04-2006 19:50
C
01 MC#01 000011
Z MONTHLY 0001
0001020
1......
GROSS 198.486
$1,373.39
NET No 12
$1,373.39
2......
GROSS 498
$4,253.64
NET No 12
$4,203.64
------------------------
TL
GROSS 74657
$12,871.63
$0.17
NET No 574
$12,881.00
$22.44
169
Read/reset report
TE-2200/2400 Dealer's Manual
Table analysis report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Table character/customer count
—Sales ratio/net amount
—Customer count total
—Net amount total
Z 03-04-2006 19:55
C
01 MC#01 000012
Z ANALYSIS 0001
0001028
TBL01 CT 34
10.66% $1,373.39
TBL02 CT 27
29.24% $3,767.65
TBL20 CT 23
2.67%$344.84
------------------------
TL CT 162
$12,881.00
Open check report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
— Report header/title
—Report code
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Table No./No. of customer
—Check No.
—Subtotal amount
—Print “BUSY”, if the check is currently opened.
—No. of open check
—Open check total
Z 03-04-2006 20:05
C
01 MC#01 000014
Z OPEN CHECK
0001025
REG 03-04-2003 09:02
C
01 MC#01 000004
TABLE No.123456 CT 12
CHECK No.
123
$250.00
REG 03-04-2003 09:02
C
01 MC#01 000006
TABLE No.111111 CT 14
CHECK No.12345678
BUSY
$300.00
------------------------
TL No 28
$1,374.00
170
Read/reset report
Scanning PLU report
By group/department report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Classified title (by group/dept)
—Scanning PLU character/quantity
—Sales ratio/total
—Scanning PLU code
—Total of this classification
—Quantity total
—Amount total
Z 03-04-2006 20:10
C
01 MC#01 000015
Z SCAN PLU 0001
2001026
DEPT01 ......01
SCAN_PLU001 382
17.07% $1,583.47
#4901234567894
SCAN_PLU002 382
38.01% $3,526.46
#4989012345674
SCAN_PLU003 382
10.49% $973.45
#4967890123454
------------------------
1253
$9,275.83
DEPT02 ......02
SCAN_PLU010 453
17.07% $1,583.47
#4945678901234
------------------------
243
$10,375.93
------------------------
TL 12653
$273,375.93
171
Read/reset report
TE-2200/2400 Dealer's Manual
Best 50 report
Inactive report
—Classified title
—Ranking
—Scanning PLU character/quantity
—Sales ratio/total
—Scanning PLU code
—Total of this classification
—Quantity total
—Amount total
—Classified title
—Scanning PLU character/quantity
—Sales total
—Scanning PLU code
—Total of this classification
—Quantity total
—Amount total
DEPT01 ......01
1......
SCAN_PLU002 382
38.01% $3,526.46
#4934567890124
2......
SCAN_PLU001 285
#4912345678904
50.....
SCAN_PLU003 72
10.49% $973.45
#4956789012344
------------------------
1253
$9,275.83
DEPT02 ......02
1......
SCAN_PLU010 453
17.07% $1,583.47
#4990123456784
------------------------
1243
$10,375.93
------------------------
TL 12653
$273,375.93
DEPT01 ......01
SCAN_PLU001 3
$5.83
#4901234567894
SCAN_PLU002 0
$0.00
SCAN_PLU050 0
$0.00
#4934567890124
------------------------
3
$5.83
DEPT02 ......02
SCAN_PLU010 0
$0.47
#123456
------------------------
2
$10.93
------------------------
25
TL $15.93
172
Read/reset report
Scanning PLU stock report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
— Mix & match character/count
—Mix & match total
—Count total
—Amount total
Z 03-04-2006 20:25
C
01 MC#01 000019
Z MIX&MATCH 0001
0001061
DISCOUNT01 No 6
$3.00
DISCOUNT02 No 12
$12.00
DISCOUNT03 No 24
$3.00
------------------------
TL No 65
$75.93
Mix & match report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Classified title (by group/dept)
— Scanning PLU character/optimum stock quantity
—Actual stock quantity
—Scanning PLU code
—* indicates stock shortage
Z 03-04-2006 20:22
C
01 MC#01 000018
Z SCAN STOCK 0001
2001065
DEPT01 ......01
SCAN_PLU001 382.000
458.347
#4901234567894
SCAN_PLU002 * 382.000
105.000
#4989012345674
173
Read/reset report
TE-2200/2400 Dealer's Manual
File reset
PLU reset
Scanning PLU reset
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter
—Report code
—Action/result
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter
—Report code
—Action/result
Z 03-04-2006 22:25
C
01 MC#01 000050
Z PLU 0001
0051014
PLU Z clear Normal End
Z 03-04-2006 22:30
C
01 MC#01 000051
Z SCAN PLU 0001
0051026
PLU Z clear Normal End
Time & attendance report
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—Report header/title/reset counter (Z only)
—Report code
—Employee name/employee No.
—Clock-in/out date/clock-in time/clock-out time
—Work time
—Total work time
Z 03-04-2006 20:30
C
01 MC#01 000021
Z ATTENDANCE 0001
0001029
CSHR01 1111111111
03-03-02 08:55->17:09
08:16
03-03-03 08:56->17:11
08:17
03-03-04 08:55->--:--
--:--
------------------------
TL 16:33
CSHR02 2222222222
174
Read/reset report
175
Application systems
TE-2200/2400 Dealer's Manual
Application systems
Scanning PLU
You can register items by scanning.
System configuration of the scanning PLU system
Setup
1. After connecting a barcode scanner, program I/O parameter table to fit the scanner.
2. Allocate scanning PLU function keys (such as <OBR>, <One touch NLU>, <PRICE CHANGE>, and <PRICE IN-
QUIRY> ). If you use multi price, allocate <PRICE SHIFT> too.
3. Allocate scanning PLU files and non-PLU table file.
4. Program the non-PLU table to suit your scanning system.
5. Program batch maintenance PLU file to add items.
6. Activate the batch maintenance PLU file.
Barcode system
Input method
Scanning PLU code Scanner OBR code <OBR> One touch NLU
EAN-13 (JAN-13) ✔13 digits with check digit ✔
PLU type EAN-8 (JAN-8) ✔8 digits with check digit ✔
UPC-A ✔11 digits without check digit ✔
UPC-E ✔6 digits without check digit ✔
EAN-13 (JAN-13) ✔13 digits with check digit ✔
Non PLU type EAN-8 (JAN-8) ✔8 digits with check digit ✔
UPC-A ✔11 digits without check digit ✔
Scanner
176
Application systems
PLU maintenance
There are three ways to maintain scanning PLU, i.e. not found PLU maintenance, batch PLU maintenance and direct PLU
maintenance.
Not found PLU maintenance
When an item which code is not existed in the scanning PLU file is registered, the “Not found” error occurs. You can
register this item by not found PLU maintenance procedure. After this maintenance, this item is registered without the “Not
found” error and stored in the PLU file.
Batch maintenance
Batch maintenance is used for adding items to the scanning PLU file, changing the scanning PLU item programming data
or deleting items from the scanning PLU file.
1 Program the batch maintenance PLU file.
2 Activate the batch maintenance file.
Register
Scanning
PLU file
Batch mainte-
nance PLU file
1
2
Direct maintenance
Direct maintenance is used for adding items to the scanning PLU file, or changing the scanning PLU item programming
data.
1 Program the direct maintenance PLU file.
Register
Scanning
PLU file
Direct mainte-
nance PLU file
1
177
Application systems
TE-2200/2400 Dealer's Manual
Scanning PLU registration
By scanner/code input/one touch NLU key
OPERATION RECEIPT
“Scanning”
123
456B
B
F
Not found PLU item
OPERATION RECEIPT
“Scanning”
“Not Found Error”
100!
“Scanning”
F
Scan-PLU ($2.35)
Item 1 —————————
(scan) PLU code 49012347
—————————————
Scan-PLU ($2.00)
Item 2 —————————
(code) PLU code 123456
—————————————
Scan-PLU ($1.23)
Item 3 —————————
(OTN) PLU code 49012354
—————————————
Payment Cash $5.58
Scanning-PLU code and
OBR key
OBR
NLU
One touch NLU
1 PLU0001 •2.34
#49012347
1 PLU0002 •2.00
#123456
1 PLU0003 •1.23
#49012354
TL
•5.58
CASH •5.58
—Scanning PLU code *1
Scan-PLU ($1.00)
—————————
Item 1 PLU code 49012361
(scan) —————————
Dept. 1
—————————————
Scan-PLU ($1.00)
Item 2 —————————
(scan) PLU code 49012361
—————————————
Payment Cash $2.00
Does not exist in the scanning
PLU file
Input price and press the linked
department key.
Register normally.
1 DEPT01 •1.00
#49012361
1 DEPT01 •1.00
#49012361
TL
•2.00
CASH •2.00
—Link department
descriptor/amount
*1 Programmable option
178
Application systems
Price change operation
When a scanning PLU item is programmed to enable to change price, you can change the unit price
temporarily. The preset price in the scanning PLU file is not changed by this operation. You can restrict the
temporary price is less/greater than the programmed unit price by the general function program.
OPERATION RECEIPT
100B
“Scanning”
F
Force to enter price manually
When a scanning PLU item is programmed to force to enter unit price, you must enter the unit price. The preset
price in the scanning PLU file is not changed by this operation. You can restrict the temporary price is less/
greater than the programmed unit price by the general function program.
OPERATION RECEIPT
“Scanning”
100B
F
Multiple price
Before registering multiple price PLU, allocate <PRICE SHIFT> and program the appropriate price shift
number to the key.
OPERATION RECEIPT
“Scanning”
B
“Scanning”
B
“Scanning”
F
($1.20)
Scan-PLU ↓
$1.00
Item —————————
PLU code 49012361
—————————
Dept. 1
—————————————
Payment Cash $1.00
This item should be programmed as
“Enable to price change.”
1 SCAN-PLU0001 •1.00
#49012361
TL
•1.00
CASH •1.00
Temporary unit price
PRC
CHG
PRICE
The message “Input Price” is shown.
($1.20)
Scan-PLU ↓
$1.00
Item —————————
PLU code 49012361
—————————
Dept. 1
—————————————
Payment Cash $1.00
1 SCAN-PLU0001 •1.00
#49012361
TL
•1.00
CASH •1.00
PRC
SFT2
No <PRICE SHIFT> designates the
1st record of the item.
Scan-PLU ($1.00)
Item 1 (1st rec.)
—————————
PLU code 49016321
—————————————
Scan-PLU ($2.00)
Item 2 (2nd rec.)
—————————
PLU code 49016321
—————————————
Scan-PLU ($6.00)
Item 3 (3rd rec.)
—————————
PLU code 49016321
—————————————
Payment Cash $9.00
1 SCAN-PLU(1st) •1.00
#49016321
1 SCAN-PLU(2nd) •2.00
#49016321
1 SCAN-PLU(3rd) •6.00
#49016321
TL
•9.00
CASH •9.00
PRC
SFT3
179
Application systems
TE-2200/2400 Dealer's Manual
Mix & match discount
There are three types of mix & match processing:
• Discount 1 (discount every required quantity)
• Discount 2 (discount one time per one transaction)
• Discount 3 (discount continuously)
Mix & match discount affects to the item totalizer, link department totalizer and link department discount
totalizer, when the “Net totaling” option is selected.
Discount type 1:
In this type of processing, a discount is made when the quantity of a particular scanning PLU reaches a certain number
during registration.
For example, assume that when three units of a particular scanning PLU, $0.34 a piece, are sold at $1.00. In this case, a
discount is made automatically when the third unit of that scanning PLU is registered.
OPERATION RECEIPT
“Scanning”
“Scanning”
“Scanning”
F
Discount type 2:
In this type of processing, a discount is made when the quantity of a particular scanning PLU reaches a certain number
during registration. But this discount is made only one time per one transaction.
OPERATION RECEIPT
“Scanning”
“Scanning”
“Scanning”
“Scanning”
“Scanning”
“Scanning”
F
Mix & match discount is made.
Scan-PLU ($0.34)
—————————
Item PLU code 49012361
—————————
Quantity 3
—————————————
Discount type 1: 3/ $0.02
—————————————
Payment Cash $1.00
1 SCAN-PLU0001 •0.34
#49012361
1 SCAN-PLU0001 •0.34
#49012361
1 SCAN-PLU0001 •0.34
#49012361
DISCOUNT01 -0.02
TL
•1.00
CASH •1.00
—Discount amount
Mix & match discount is made.
Mix & match discount is not
made.
Scan-PLU ($0.34)
—————————
Item PLU code 49012361
—————————
Quantity 6
—————————————
Discount type 2: 3/ $0.02
—————————————
Payment Cash $2.02
1 SCAN-PLU0001 •0.34
#49012361
1 SCAN-PLU0001 •0.34
#49012361
1 SCAN-PLU0001 •0.34
#49012361
DISCOUNT01 -0.02
1 SCAN-PLU0001 •0.34
#49012361
1 SCAN-PLU0001 •0.34
#49012361
1 SCAN-PLU0001 •0.34
#49012361
TL
•2.02
CASH •2.02
180
Application systems
Discount type 3:
In this type of processing, a discount is made when the quantity of a particular scanning PLU reaches a certain number
during registration. And this discount is made after this item registration.
OPERATION RECEIPT
“Scanning”
“Scanning”
“Scanning”
“Scanning”
F
Mix & match discount is made.
Mix & match discount is made.
Scan-PLU ($0.34)
—————————
Item PLU code 49012361
—————————
Quantity 4
—————————————
Discount type 3: 3/ $0.02
—————————————
Payment Cash $1.32
1 SCAN-PLU0001 •0.34
#49012361
1 SCAN-PLU0001 •0.34
#49012361
1 SCAN-PLU0001 •0.34
#49012361
DISCOUNT01 -0.02
1 SCAN-PLU0001 •0.34
#49012361
DISCOUNT01 -0.02
TL
•1.32
CASH •1.32
Slip printer
(COM2) External printer
(COM1/2)
Up to 2 printers
Check tracking system
System configuration
181
Application systems
TE-2200/2400 Dealer's Manual
Printing on the external printers
You can print receipts/orders on external printer. Maximum 2 external printers can be connected to a terminal. It is possible
to print out to another printer (i.e. another external, or internal R/J) for backup.
The printouts from R/J printer and external printer can be divided into 3 types; 1. Receipt type, 2. Report type, and 3. Order
type.
For receipt type, only <RECEIPT> and <BILL> have this option – Receipt 1/Receipt 2/Receipt 3 – of the target printer; R/
J, external 1, or external 2.
For report type, you can define one target printer; R/J, external 1 or external 2.
For order type, each item has its own option – Order1/Order 2/Order 3 – of the target printer; R/J, external 1, or external 2.
System configuration of the external printer system
•Maximum 2 printers/1 terminal (Refer to the system configuration chapter.)
•External printer buffer (file 049) should be allocated. (Refer to the program 5 chapter.)
Setup
1. Program the target printer (Order1, Order 2, Order 3) to each item by address 16 of the item individual feature program-
ming.
2. Program the target printer (Receipt 1, Receipt 2, Receipt 3) to <BILL> or <RECEIPT>. If you want to print out these
receipt to an external printer, select “Buffered print” of the address 05 of the general function program.
3. Program the main printout destination and backup destination to the printer connection table.
4. Program the I/O parameter table to define the peripheral devices including external printer(s).
Note: FC operation is necessary, if you change the I/O parameter table.
Backup system
If the main destination printer is out of order (such as power failure, or paper out), the terminal sends this data to the backup
destination printer automatically.
Note:
1. The destination of normal registrations is “Receipt 1” (fixed).
“Buffered print” of the address 05 of the general function is necessary.
2. The destination of post receipts/guest receipts is programmable.
“Buffered print” of the address 05 of the general function is NOT necessary.
3. The destination of bill copy is programmable.
“Buffered print” of the address 05 of the general function is necessary.
4. You cannot back up the printouts to the R/J printer to external printers.
That is, R/J printer is the last backup printer.
• Receipt type
Item/key
programming I/O parameter
of this terminal
Own R/J
external
1
external
2
Receipt type 1 ~ 3
<BILL>
<RECEIPT>
<DEPT>
<PLU/Flat PLU>
Receipt type definition
Order type definition
Main = R/J, external 1 or
external 2
Backup = R/J, external 1 or
external 2
Printer definition
local 1 =
COM port
Printer model
local 2 =
COM port
Printer model
• Report type
• Order type
Report type
Order type 1 ~ 3
Main = R/J, external 1 or
external 2
Backup = R/J, external 1 or
external 2
Main = R/J, external 1 or
external 2
Backup = R/J, external 1 or
external 2
182
Application systems
Time and attendance
You can control your employees’ working time.
For this function, the employee file (file 061), the time and attendance file (file 019) and the <CLOCK-IN/OUT> key is
necessary.
Clock-in operation
1. Press the <CLOCK-IN/OUT> key, enter employee number and press the <CLOCK-IN/OUT> key. And then press the
<CASH> key.
If you enter the employee number who has clocked in already, this operation is treated as clocked-out.
Clock-out operation
1. Press the <CLOCK-IN/OUT> key, enter employee number and press the <CLOCK-IN/OUT> key. And then press the
<CASH> key.
If you enter the employee number who does not have clocked in yet, this operation is treated as clocked-in.
Printing control options for order
Below shows the summary of the programmable options for order printing.
for
Programmable option for R/J local/ Program
remote
printer location
Number of feed lines before order printing (1 ~ 9) ✔Address code 19 of the general control program
Number of feed lines after order printing (1 ~ 9) ✔Address code 19 of the general control program
Cut order ✔Address code 19 of the general control program
Show guidance for backup print of order. ✔Address code 19 of the general control program
Alert when the external printer goes down. ✔Address code 19 of the general control program
Baud rate ✔I/O parameter table
Backup destination ✔Printer connection table
Merge the same item registration on order receipt. ✔✔Address code 19 of the general control program
(Item consolidation)
Breakdown set menu printing on order. ✔✔Address code 19 of the general control program
Print order with amount. ✔✔Address code 19 of the general control program
Print order with order character. ✔✔Address code 19 of the general control program
Print order even if training clerk is registered items. ✔✔Address code 19 of the general control program
Printing color of order ✔Address code 16 of item program
Definition of order 1 ~ 3 ✔✔Address code 16 of item program
Definition of order character ✔✔Address code 16 of item program
183
Tips
TE-2200/2400 Dealer's Manual
Tips
Future order
This is an enhancement of the training function.
By using the original training specification, the training clerk cannot accept any customer. Because no journal printing and
no memory affection of this function is made.
By using “Future order”, you can get this sales data and journal printing even if the transaction is registered by the training
clerk.
Usage
Receipt issuance: OFF
1. Start training. (Sign on a training clerk.)
During training
2. Register items and finalize this transaction.
In case of accepting a customer
3. Register items and finalize this transaction.
4. Issue receipt or slip. (Press <GUEST RECEIPT> or <SLIP PRINT>.)
Journal printing and memory affection is made at this point.
:
5. End training. (Sign off the clerk.)
Preparation
1. Allocate <GUEST RECEIPT> or <SLIP PRINT>. (See program 4.)
2. Set training flag to the training clerk. (See clerk program in the program 3 mode.)
3. Set the option “print journal when the key is pressed” to the key <GUEST RECEIPT>, <SLIP PRINT>.
4. Set to affect training registrations to the periodic 1 (or 2) total, all registrations (both normal and training) to the periodic 2
(or 1) by the address code 16 of the general control program in the program 3 mode.
5. Set space to the training filler and future order message in the special character table in the program 2 mode.
Eat-in/takeout
This function is used for specifying if the customer eat in the restaurant or takeout. When the <EAT-IN> or <TAKEOUT>
is pressed before finalize operation, the “Eat-in/takeout” compulsion is released and the tax exemption is applied.
After pressing <EAT-IN> or <TAKEOUT>, only finalize operation is possible.
The compulsion is released by <OPEN2>, so be sure to allocate this key before using this function.
Receipt sample
1 HAMBURGER •2.00
1 POTATO •1.50
1 COKE •1.00
TAKE-OUT
184
Tips
Automatic execution of Euro switchover by arrangement and scheduler
The following sample shows an automatic execution program of arrangement and scheduler.
Sample program
Execution date/time: 31. December 2003 23:59
Currency definition type: 3 (Main currency = Euro, Sub currency = Local, Change = Euro)
Currency conversion rate: 1 Euro = 6.55957 F Franc
Drawer of sub currency: Main
Unit price conversion: Yes
• Arrangement
63s6::38s6A6::a6
66 6
601072002s6a6
63a66^55957a6
60a60a66A6s
*1 The same A should be pressed.
*2 Vacant record search: If you want to set an arrangement program to a new record, “vacant record search” is
possible. (enter 0000 instead of entering a record No.)
*3 A clerk who is programmed to enable to operate in X1 mode must be signed on.
*4 If necessary, sign on the original clerk who is programmed to disable to operate in X1 mode.
PGM
Mode switch
Record No. Arrangement table No. (up to 6 digits)
Skip this step, when the exchange rate has been set already.
*2 *1
*1
*4
*3
Turn the mode
switch to X.
Turn the mode
switch to PGM.
Press the appropriate clerk button.
(In case of clerk button system)
~~
• Scheduler
63s6
::
62s6
6
::
0010a6
::
a6
60312312359a6s
PGM
Mode switch
Record No.
Clerk record No.
• Set a clerk who is programmed to
enable to operate in X1 mode.
Above arrangement table No,
(up to 6 digits)
Execution date/time
~
~
185
Appendix (Calculation method)
TE-2200/2400 Dealer's Manual
Appendix: Calculation method
The following calculation methods of totalizer memories are explained in this chapter.
•All formulas in these explanations are calculated in the registration mode.
• In the RF mode, the values in totalizers are calculated using the opposite sign.
•In the REG– mode, the value in totalizers and counters are calculated using the opposite sign.
Fixed total file
Total or Counter Increments or Decrements by
Gross sales quantity Number of products registered for Departments + PLUs + Scanning PLUs (non hash)
{For Department, PLUs and Scanning PLUs
Single items : +1
Multiplication : Input quantity
Split price : Input quantity
Square : Input quantity × Input quantity
Cube : Input quantity × Input quantity × Input quantity}
– Last item void – Return item – Previous item void – Cancel
Gross sales amount Number of products registered for Departments + PLUs + Scanning PLUs (non hash)
{For Department, PLUs and Scanning PLUs
Single items : Preset or manually input prices
Multiplication : Preset or manually input prices × Input quantity
Split price : (Preset or manually input prices / Input unit quantity)
× Input quantity
Square : Preset or manually input prices × Input quantity
× Input quantity
Cube : Preset or manually input prices × Input quantity
× Input quantity × Input quantity}
– Last item void – Return item – Previous item void – Cancel
Adjustment amounts in Minus, Plus, Discount (%–), Premium (%+), Coupon transactions
are not reflected.
Adjustment amounts in Minus, Plus, Discount (%–), Premium (%+) Coupon transactions are
reflected.
Net sales quantity +1 (When a transaction is finalized for sale. For REG– mode –1 is affected.)
Net sales amount {Department + PLU + Scanning PLU product registration amounts
– Last item void amounts for the above
– Item return amounts for the above
– Previous item void amounts for the above
– Cancel amounts for the above}
+ {Plus (+ key)
+ Premium (%+ key)
– Error correction amounts
– Cancel amounts}
– {Minus (– key)
– Discount(%– key)
– Coupon
– Error correction amounts
– Cancel amounts}
+ {Manual tax
– Error correction amounts
– Cancel amounts}
+ Results of tax table calculations (add-on tax)
In gross/net calculation:
1) When gross calculation is
specified
2) When net calculation is
specified
186
Appendix (Calculation method)
Total or Counter Increments or Decrements by
Sales total or tendered total by specified medium
+ Received on account total (Cash in drawer only)
– Paid out (Cash in drawer only)
+ Loan totals (by selected medium)
– Pick up totals (by selected medium)
– Change amounts (Cash in drawer only)
– Total of check cashing transaction (When specified as cash in drawer)
Declared medium in drawer
– Medium in drawer
(Only effective when the result of this formula becomes negative)
Medium in drawer
– Declared medium in drawer
(Only effective when the result of this formula becomes negative)
+1 (When cash sales, charge sales, credit sales, and check sales transaction are finalized in
the RF/REG– mode.)
Absolute value of total sales amount for RF/REG– mode registrations.
Entered number of covers
Net sales amount / Customer count
+ Check amount × Service ratio or
+ Service fee amount
+ MD/ST amount × Service charge ratio or
+ Service charge fee amount
Item sales (commissionable) × Clerk commission rate
Entered amount in cash payment in foreign currency.
Entered amount in check payment in foreign currency.
+ Registered amount of Minus/Discount key
+ Registered amount of Coupon key
+ Registered item amount by RF/Void key
+ 1 (REG, RF, REG– mode) (When the <CLEAR> key is pressed.)
+ 1 (whenever declaration is performed)
+ Fraction amount by roundings
(Roundings include IF1/2, Danish, Norwegian, Singaporean, and Finnish.)
Subtotal of taxable amount at finalization of sale (in case of add-on tax)
Subtotal of taxable amount – VAT (in case of add-in tax)
Result of calculation using tax table for taxable amount at finalization of sales
Grand total of net sales totals
Absolute value of
{Registration amount (Department, PLU)
+ Last item void amount
+ Previous item void amount
+ Refund amount}
+ {Plus, Minus, Premium, Discount, Coupon
+ Last item void amount}
+ Tax
Net sales total
– add-on tax
– add-in tax
– commission
Medium in drawer
(Cash, charge, check, credit,
Food stamp, EBT)
Declared short medium
amount
(except Food stamp, EBT)
Declared over medium
amount
(except Food stamp, EBT)
Number of RF mode items
RF mode amount
Customer count
Average sales per customer
Check cashing service fee
New balance fee
Clerk commission total
Foreign currency in cash
drawer
Foreign currency in check
drawer
Discount amount
Coupon amount
Item return amount
Clear count
Declaration count
Rounding
Taxable amount
Tax amount
GT 1
GT 2
GT 3
187
Appendix (Font table)
TE-2200/2400 Dealer's Manual
Appendix: Font code tables
These models have the capability to print/display in Slavic, Greek, Cyrillic, Baltic, Arabic fonts.
If you want to use these special font set, initialize the machine and enter the special initialization code (D14 ~ D12) before the
original code 1 (D11 ~ D1). (Refer to the initialization chapter.)
Standard font set (default)
Multilingual + Euro (Windows code page 858)
0@P p
!1AQaq
"2BRbr
#3CScs
$4DTdt
%5EUeu
&6FVfv
'7GWgw
(8HXhx
)9IYiy
*:JZjz
+;K^k{
,<L¥l|
-•M[m}
. >N\n~
/?O]o
Éá ó -
æí Dß ±
Æó Êô _
ôú Ëò
3
/
4
öñ Èõ ¶
òÑ Á ⁄ Õ §
ûªÂã͵ ÷
ùºÀÃÎp ¸
ÿ¿ © Ï P °
Ö® Ú ¨
ܬ Û •
ø
1
/
2
Ù
1
£
1
/
4
y
3
Ø¡¢ |Y
2
‹«¥ Ì
ƒ»ı¤
Ç
ü
é
â
ä
à
å
ç
ê
ë
è
ï
î
ì
Ä
Å
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
Space 32 48 64 80 96 112
33 49 65 81 97 113
34 50 66 82 98 114
35 51 67 83 99 115
36 52 68 84 100 116
37 53 69 85 101 117
38 54 70 86 102 118
39 55 71 87 103 119
40 56 72 88 104 120
41 57 73 89 105 121
42 58 74 90 106 122
43 59 75 91 107 123
44 60 76 92 108 124
45 61 77 93 109 125
46 62 78 94 110 126
47 63 79 95 111 127
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
128 144 160 176 192 208 224 240
129 145 161 177 193 209 225 241
130 146 162 178 194 210 226 242
131 147 163 179 195 211 227 243
132 148 164 180 196 212 228 244
133 149 165 181 197 213 229 245
134 150 166 182 198 214 230 246
135 151 167 183 199 215 231 247
136 152 168 184 200 216 232 248
137 153 169 185 201 217 233 249
138 154 170 186 202 218 234 250
139 155 171 187 203 219 235 251
140 156 172 188 204 220 236 252
141 157 173 189 205 221 237 253
142 158 174 190 206 222 238 254
143 159 175 191 207 223 239 255
Double
size
188
Appendix (Font table)
Special font set
Slavic (Windows code page 852)
Special initialization code D14 D13 D12 = 010
Greek
Special initialization code D14 D13 D12 = 020
Éá Ó–
ĹíĐß˝
ĺóĎÔ
ôú ËM˙
öĄń˘
LąÁŇň§
lŽÃĂÍŠ÷
ŚžEăΚ,
śĘȘ ěR°
ÖęÚ¨
Üŕ•
Ťź Vű
CyR
ŁșŻ ŢYr
«żŮţ
č»ı¤ ´
Ç
ü
é
â
ä
u
g
ç
l
ë
V
o
î
ź
Ä
G
˘
˘
´
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
128 144 160 176 192 208 224 240
129 145 161 177 193 209 225 241
130 146 162 178 194 210 226 242
131 147 163 179 195 211 227 243
132 148 164 180 196 212 228 244
133 149 165 181 197 213 229 245
134 150 166 182 198 214 230 246
135 151 167 183 199 215 231 247
136 152 168 184 200 216 232 248
137 153 169 185 201 217 233 249
138 154 170 186 202 218 234 250
139 155 171 187 203 219 235 251
140 156 172 188 204 220 236 252
141 157 173 189 205 221 237 253
142 158 174 190 206 222 238 254
143 159 175 191 207 223 239 255
Double
size
PÈ ˆ≡
™Î ¿±
TÏ ¤ ≥
YÌ ‹ ≤
ºÓ ˚
XÍ ›
æÔ fi ÷
ø ‡ ≈
·Ú ¸ °
‚Û Ò •
Á˜ ø .
‰Ù ‰√
ÂÓ ∞
n
˙Ê ∅
2
˯ ∈
ı„ ∩
A
B
°
¢
E
Z
H
£
I
K
§
M
N
•
O
¶
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
128 144 160 176 192 208 224 240
129 145 161 177 193 209 225 241
130 146 162 178 194 210 226 242
131 147 163 179 195 211 227 243
132 148 164 180 196 212 228 244
133 149 165 181 197 213 229 245
134 150 166 182 198 214 230 246
135 151 167 183 199 215 231 247
136 152 168 184 200 216 232 248
137 153 169 185 201 217 233 249
138 154 170 186 202 218 234 250
139 155 171 187 203 219 235 251
140 156 172 188 204 220 236 252
141 157 173 189 205 221 237 253
142 158 174 190 206 222 238 254
143 159 175 191 207 223 239 255
Double
size
189
Appendix (Font table)
TE-2200/2400 Dealer's Manual
Cyrillic (Windows code page 866)
Special initialization code D14 D13 D12 = 030
Baltic
Special initialization code D14 D13 D12 = 040
›
Ò fi
Ú ∏
Û π
Ù Ï
ı ï
ˆ Y
˜ y
¯ °
˘ •
˙ .
˚ ˜
¸
n
˝
2
˛
fl
Ä ê ‡
Å ë ·
Ç í ‚
É ì „
Ñ î ‰
E ï Â
Ü ñ Ê
á ó Á
à ò Ë
â ô È
ä ö Í
ã õ Î
å ú Ï
ç ù Ì
é û Ó
è ü Î
˘
˘
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
128 144 160 176 192 208 224 240
129 145 161 177 193 209 225 241
130 146 162 178 194 210 226 242
131 147 163 179 195 211 227 243
132 148 164 180 196 212 228 244
133 149 165 181 197 213 229 245
134 150 166 182 198 214 230 246
135 151 167 183 199 215 231 247
136 152 168 184 200 216 232 248
137 153 169 185 201 217 233 249
138 154 170 186 202 218 234 250
139 155 171 187 203 219 235 251
140 156 172 188 204 220 236 252
141 157 173 189 205 221 237 253
142 158 174 190 206 222 238 254
143 159 175 191 207 223 239 255
Double
size
ĄSbs
IMim
¢ÃNãn
£GÓgó
¤ÄÕäõ
•ÅÕåõ
FÖfö
§Exe
ØøCUcu
ÉLél
RrŹŚźś
«»EUeu
GÜg ü
KWkw
IZiz
Ææ L ß l
,,
,,
,,
,,
,,
,,
°
°
˛˛
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
128 144 160 176 192 208 224 240
129 145 161 177 193 209 225 241
130 146 162 178 194 210 226 242
131 147 163 179 195 211 227 243
132 148 164 180 196 212 228 244
133 149 165 181 197 213 229 245
134 150 166 182 198 214 230 246
135 151 167 183 199 215 231 247
136 152 168 184 200 216 232 248
137 153 169 185 201 217 233 249
138 154 170 186 202 218 234 250
139 155 171 187 203 219 235 251
140 156 172 188 204 220 236 252
141 157 173 189 205 221 237 253
142 158 174 190 206 222 238 254
143 159 175 191 207 223 239 255
Double
size
190
Appendix (Font table)
Arabic
Special initialization code D14 D13 D12 = 050
°ß
.∞
•ø
√±£
1
/
2
¤
1
/
4
«
»
~
~
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
128 144 160 176 192 208 224 240
129 145 161 177 193 209 225 241
130 146 162 178 194 210 226 242
131 147 163 179 195 211 227 243
132 148 164 180 196 212 228 244
133 149 165 181 197 213 229 245
134 150 166 182 198 214 230 246
135 151 167 183 199 215 231 247
136 152 168 184 200 216 232 248
137 153 169 185 201 217 233 249
138 154 170 186 202 218 234 250
139 155 171 187 203 219 235 251
140 156 172 188 204 220 236 252
141 157 173 189 205 221 237 253
142 158 174 190 206 222 238 254
143 159 175 191 207 223 239 255
Double
size
191
Appendix (Peripheral configuration)
TE-2200/2400 Dealer's Manual
Appendix: Peripheral device configuration
UP-360
Dip switch is located at the bottom of the printer.
SW No. Function
Reset by DTR
reserved
Protocol
Transmision speed
Parity
undifined
Low power comsumption
undifined
ON OFF
Yes No
--- fixed
DTR/DSR XON/XOFF
See transmission
speed setting
See paritysetting
--- ---
Yes No
--- ---
SW No.
7
OFF
ON
OFF
ON
UP-360 Bottom view
1
2
3
4
5
6
7
8
9
10
1Parity setting
Non
Even
Odd
Non
6
OFF
OFF
ON
ON
Transmission
speed setting
bps
4800
9600
19200
38400
SW No.
4
OFF
OFF
ON
ON
5
OFF
ON
OFF
ON
SP-1300
* Please select this option.
Baud rate setting
SW No.
bps 7 8
1200 OFF OFF
2400 ON OFF
4800 OFF ON
9600 ON ON
SW No. Function ON OFF
1Baud rate setting See baud rate setting
2
3Data length 8 bits 7 bits
4Parity check Disabled Enabled
5Parity Odd Even
6 Handshake DTR/DSR XON/XOFF
7Receive buffer size 2 kbytes * 35 bytes
8Character code set Katakana PC437
9Pin 6 (DSR) reset signal Enabled Disabled
10 Pin 25 (INIT) reset signal Enabled Disabled
DIP switch under the document table
ON
OFF 1234 567 8910
192
Appendix (Peripheral configuration)
Select these options:
1. Interface selection:
SNI RS-232C interface selection
2. Baud rate:
Baud rate = 9600 bps
3. Data format settings:
Parity = Odd
Stop bits = One
Data bits = Eight bits
4. Software control:
Hardware control = Enable CTS/RTS flow control
Software control = Disable Xon/Xoff
5. RS-232C ACK/NAK options:
ACK/NAK enable = Disable ACK/NAK
6. Setting symbology specific label identifiers:
Transmit label I.D. as prefix
“SNI RS232C” default value:
1. General features:
Audible signal = Enable
Power-up beeping = Enable
Beeper volume = Low
Beeper duration = 100ms
When to beep = Beep/LED after decode
Low power mode = Disable
Debug mode = Disable
Auto sense stand mode = Disable
2. RS-232 I/F settings:
RS-232 I/F = N/A
SNI RS-232 I/F = Enable
Baud rate = 9600
Parity = Odd
Stop bit = 1
Data bit = 8
Hardware control = Use CTS/RTS flow control
Software control = Disable = Xon/Xoff
Intercharacter delay = 0
Keyboard wedge I/F settings:
KBD wedge I/F type = N/A
External keyboard/No keyboard = N/A
Send control characters = N/A
Intercharacter delay = N/A
3. Label transmit format config items:
Prefix = Disable
Suffix = Global D00
Label I.D. control = Transmit as prefix
UPC-A label I.D. = 4100
4. Symbology:
UPC/EAN = Enable
5. UPC/EAN options:
UPC-A to EAN-13 expansion = Expand
UPC-E to UPC-A expansion = Don’t expand
EAN-8 to EAN-13 expansion = Don’t expand
UPC-E to EAN-13 expansion = Don’t expand
Quick scan 6000
Appendix (File record format)
TE-2200/2400 Dealer's Manual 193
Appendix: File record format
Fixed totalizer file
Fixed totalizer (daily)
File name: Fixed totalizer (daily) File No.: 001 Max. allocatable records: 99(fixed)
Fixed totalizer (periodic/consolidation)
File name: Fixed totalizer (periodic 1) File No.: 101 Max. allocatable records: 99(fixed)
File name: Fixed totalizer (periodic 2) File No.: 201 Max. allocatable records: 99(fixed)
File name: Fixed totalizer (daily consolidation) File No.: 301 Max. allocatable records: 99(fixed)
File name: Fixed totalizer (periodic 1 consolidation) File No.: 401 Max. allocatable records: 99(fixed)
File name: Fixed totalizer (periodic 2 consolidation) File No.: 501 Max. allocatable records: 99(fixed)
Rec No. Description
001 Gross sales total
002 Net sales total
003 Cash in drawer
004 Cash declared amount
005 Declared short cash amount
006 Declared over cash amount
007 Charge in drawer
008 Charge declared amount
009 Declared short charge amount
010 Declared over charge amount
011 Check in drawer
012 Check declared amount
013 Declared short check amount
014 Declared over check amount
015 Credit 1 in drawer
016 Credit 2 in drawer
017 Credit 3 in drawer
018 Credit 4 in drawer
019 Credit declared amount
020 Declared short credit amount
021 Declared over credit amount
022 Cash in drawer *
023 Cash declared amount *
024 Declared short cash amount *
025 Declared over cash amount *
026 Charge in drawer *
027 Charge declared amount *
028 Declared short charge amount *
029 Declared over charge amount *
030 Check in drawer *
031 Check declared amount *
032 Declared short check amount *
033 Declared over check amount *
Rec No. Description
034 Credit 1 in drawer *
035 Credit 2 in drawer *
036 Credit 3 in drawer *
037 Credit 4 in drawer *
038 Credit declared amount *
039 Declared short credit amount *
040 Declared over credit amount *
041 Food stamp in drawer
042 Food stamp cash change
043 EBT in drawer
044 EBT cash change
045 Refund mode total
046 Customer count
047 Average sales per customer
048 Check cashing service fee
049 New balance fee
050 not used
051 Clerk commission 1 total
052 Clerk commission 2 total
053 Foreign currency cash in drawer 1
054 Foreign currency check in drawer 1
055 Foreign currency cash in drawer 2
056 Foreign currency check in drawer 2
057 Foreign currency cash in drawer 3
058 Foreign currency check in drawer 3
059 Foreign currency cash in drawer 4
060 Foreign currency check in drawer 4
061 Reduction
062 Coupon
063 Item return
064 Clear counter
065 Rounding2 *
066 Rounding1
Rec No. Description
067 Cancellation
068 Money declaration count
069 Taxable amount 1
070 Tax 1
071 Tax exempt 1
072 Taxable amount 2
073 Tax 2
074 Tax exempt 2
075 Taxable amount 3
076 Tax 3
077 Tax exempt 3
078 Taxable amount 4
079 Tax 4
080 Tax exempt 4
081 Taxable amount 5
082 Tax 5
083 Tax exempt 5
084 Taxable amount 6
085 Tax 6
086 Tax exempt 6
087 Taxable amount 7
088 Tax 7
089 Tax exempt 7
090 Taxable amount 8
091 Tax 8
092 Tax exempt 8
093 Taxable amount 9
094 Tax 9
095 Tax exempt 9
096 Taxable amount 10
097 Tax 10
098 Tax exempt 10
099 Nontaxable amount
* Totalizers for sub currencies
0121722
Character Counter Totalizer
0510
Counter Totalizer
194
Appendix (File record format)
PLU file
PLU (daily)
File name: PLU File No.: 004 Max. allocatable records: Depend on the model
PLU (periodic/consolidation)
File name: PLU (periodic 1) File No.: 104 Max. allocatable records: see above
File name: PLU (periodic 2) File No.: 204 Max. allocatable records: see above
File name: PLU (daily consolidation) File No.: 304 Max. allocatable records: see above
File name: PLU (periodic 1 consolidation) File No.: 404 Max. allocatable records: see above
File name: PLU (periodic 2 consolidation) File No.: 504 Max. allocatable records: see above
Transaction key file
Transaction key (daily)
File name: Transaction key (daily) File No.: 002 Max. allocatable records: 999
Transaction key (periodic/consolidation)
File name: Transaction key (periodic 1) File No.: 102 Max. allocatable records: 999
File name: Transaction key (periodic 2) File No.: 202 Max. allocatable records: 999
File name: Transaction key (daily consolidation) File No.: 302 Max. allocatable records: 999
File name: Transaction key (periodic 1 consolidation) File No.: 402 Max. allocatable records: 999
File name: Transaction key (periodic 2 consolidation) File No.: 502 Max. allocatable records: 999
0510
Counter Totalizer
02 14 21 25 30 35
Character Program @/Rate Counter Totalizer
Function code
01623252831 3437 40 43 48
Character Program Link @
HALO
Counter
48 53 58 63 68 73
Old Red
Totalizer Discount amount amount Stock
totalizer totalizer totalizer
Unit quantity
Random
code
Minimum
stock
Bottle/set-
menu link
051015 20 25 30
Old Red
Counter Totalizer Discount amount amount Stock
totalizer totalizer totalizer
Appendix (File record format)
TE-2200/2400 Dealer's Manual 195
Group file
Group (daily)
File name: Group (daily) File No.: 006 Max. allocatable records: 99
Group (periodic/consolidation)
File name: Group (periodic 1) File No.: 106 Max. allocatable records: 99
File name: Group (periodic 2) File No.: 206 Max. allocatable records: 99
File name: Group (daily consolidation) File No.: 306 Max. allocatable records: 99
File name: Group (periodic 1 consolidation) File No.: 406 Max. allocatable records: 99
File name: Group (periodic 2 consolidation) File No.: 506 Max. allocatable records: 99
Department file
Department (daily)
File name: Department (daily) File No.: 005 Max. allocatable records: 99
Department (periodic/consolidation)
File name: Department (periodic 1) File No.: 105 Max. allocatable records: 99
File name: Department (periodic 2) File No.: 205 Max. allocatable records: 99
File name: Department (daily consolidation) File No.: 305 Max. allocatable records: 99
File name: Department (periodic 1 consolidation) File No.: 405 Max. allocatable records: 99
File name: Department (periodic 2 consolidation) File No.: 505 Max. allocatable records: 99
0121722
Character Counter Totalizer
0510
Counter Totalizer
051015 20 25
Old Red
Counter Totalizer Discount amount amount
totalizer totalizer totalizer
016 232528313439 44 49 5459
Old Red
Character Program Link @
HALO
Counter Totalizer Discount amount amount
totalizer totalizer totalizer
Unit quantity
196
Appendix (File record format)
Clerk file
Clerk (programming)
File name: Clerk (programming) File No.: 007 Max. allocatable records: 99
Clerk detail (daily, periodic/consolidation)
File name: Clerk detail (daily) File No.: 011 Max. allocatable records: 99 x 99
File name: Clerk detail (periodic 1) File No.: 111 Max. allocatable records: 99 x 99
File name: Clerk detail (periodic 2) File No.: 211 Max. allocatable records: 99 x 99
File name: Clerk detail (daily consolidation) File No.: 311 Max. allocatable records: 99 x 99
File name: Clerk detail (periodic 1 consolidation) File No.: 411 Max. allocatable records: 99 x 99
File name: Clerk detail (periodic 2 consolidation) File No.: 511 Max. allocatable records: 99 x 99
Clerk detail link (program)
File name: Clerk detail link File No.: 030 Max. allocatable records: 200
0510
Counter Totalizer
0121516182327 33 38
Character
Program
Check # Mode/
range operation
control
Clerk #
Clerk initial
check #
Drawer #
Commission
rate
0789
Record No/
Scanning
PLU code
Multi price flag
File No.
Appendix (File record format)
TE-2200/2400 Dealer's Manual 197
Hourly sales file
Hourly sales (daily)
File name: Hourly sales (daily) File No.: 009 Max. allocatable records: 99
Hourly sales (periodic/consolidation)
File name: Hourly sales (periodic 1) File No.: 109 Max. allocatable records: 99
File name: Hourly sales (periodic 2) File No.: 209 Max. allocatable records: 99
File name: Hourly sales (daily consolidation) File No.: 309 Max. allocatable records: 99
File name: Hourly sales (periodic 1 consolidation) File No.: 409 Max. allocatable records: 99
File name: Hourly sales (periodic 2 consolidation) File No.: 509 Max. allocatable records: 99
Monthly sales file
Monthly sales (daily, periodic/consolidation)
File name: Monthly sales (daily) File No.:010 Max. allocatable records: 31 (fixed)
File name: Monthly sales (periodic 1) File No.:110 Max. allocatable records: 31 (fixed)
File name: Monthly sales (periodic 2) File No.:210 Max. allocatable records: 31 (fixed)
File name: Monthly sales (daily consolidation) File No.:310 Max. allocatable records: 31 (fixed)
File name: Monthly sales (periodic 1 consolidation) File No.:410 Max. allocatable records: 31 (fixed)
File name: Monthly sales (periodic 2 consolidation) File No.:510 Max. allocatable records: 31 (fixed)
024 9 14 19 24
No. of Gross No. of Net
customer total
transaction
total
Start time
End time
051015 20
No. of Gross No. of Net
customer total
transaction
total
051015 20
Counter Totalizer Counter Totalizer
(Gross) (Gross) (Net) (Net)
198
Appendix (File record format)
Scanning PLU files
Scanning PLU file (daily)
File name: Scanning PLU File No.: 016 Max. allocatable records: Depend on the model
Non PLU table file (program)
File name: Non PLU table File No.:040 Max. allocatable records: 100
Batch maintenance PLU file (program)
File name: Batch maintenance PLU File No.:070 Max. allocatable records: 1000
Direct maintenance PLU file (program)
File name: Direct maintenance PLU File No.:071 Max. allocatable records: 1000
08
Program
078 2427293235373940 43 48 53 58
Minimum Actual
PLU code Character Link @ stock Counter Totalizer stock
Multi price flag
Program
Unit quantity
Bottle link
Last update date
Mix & match link
0789 25 28 30 33 36 3839 42
Minimum
PLU code Character Link @ stock
Multi price flag
Program
Unit quantity
Bottle link
Mix & match link
Flag
0789 2528 30 33 36 3839 42
Minimum
PLU code Character Link @ stock
Multi price flag
Program
Unit quantity
Bottle link
Mix & match link
Flag
Appendix (File record format)
TE-2200/2400 Dealer's Manual 199
One touch NLU table file
File name: One touch NLU table File No.:077 Max. allocatable records: 999
Mix & match table file
Mix & match table file (daily)
File name: Mix & match table (daily) File No.: 051 Max. allocatable records: 99
Mix & match table file (periodic/consolidation)
File name: Mix & match table (periodic 1) File No.: 151 Max. allocatable records: 99
File name: Mix & match table (periodic 2) File No.: 251 Max. allocatable records: 99
File name: Mix & match table (daily consolidation) File No.: 351 Max. allocatable records: 99
File name:
Mix & match table (periodic 1 consolidation)
File No.: 451 Max. allocatable records: 99
File name:
Mix & match table (periodic 2 consolidation)
File No.: 551 Max. allocatable records: 99
Bottle link table file
Bottle link table file (program)
File name: Bottle link table File No.: 073 Max. allocatable records: 999
0510
Counter Totalizer
034
File No.
Record No./random
PLU code
07
Scanning
PLU code
0121518 23 2830
Character @ Counter Totalizer
Program
Work
200
Appendix (File record format)
Table analysis file
Table analysis (daily)
File name: Table analysis (daily) File No.: 018 Max. allocatable records: 99
0510
Counter Totalizer
(customer)
0121518 23 28
Character Counter Totalizer
(customer)
Minimum
check No.
Maximum
check No.
Table analysis (periodic/consolidation)
File name: Table analysis (periodic 1) File No.: 118 Max. allocatable records: 99
File name: Table analysis (periodic 2) File No.: 218 Max. allocatable records: 99
File name: Table analysis (daily consolidation) File No.: 318 Max. allocatable records: 99
File name: Table analysis (periodic 1 consolidation) File No.: 418 Max. allocatable records: 99
File name: Table analysis (periodic 2 consolidation) File No.: 518 Max. allocatable records: 99
Time and attendance file
Time and attendance (daily)
File name: Time and attendance (daily) File No.: 019 Max. allocatable records: 99
Employee file
File name: Employee File No.: 061 Max. allocatable records: 99
03581012 14 16
Clock-in date
Employee rec-#
Clock-in time
Clock-out date
Clock-out time
Next rec-#
Work time
01217
Character
Employee
number
Appendix (File record format)
TE-2200/2400 Dealer's Manual 201
Grand total file
Grand total (daily)
File name: Grand total (daily) File No.: 020 Max. allocatable records: 3 (fixed)
Grand total (consolidation)
File name: Grand total (consolidation) File No.: 320 Max. allocatable records: 3 (fixed)
01220
Character Totalizer
08
Totalizer
General control file
General control
File name: General control File No.: 022 Max. allocatable records: 37 (fixed)
Rec No. Contents
001 Date order, Monetary mode
002 Password, Machine ID., Machine No.
003 Consecutive number
004 Clerk interrupt, Rounding, Tax system
005 Receipt control (1)
006 Calculation, Operation control
007 Menu shift control
008 Fixed totalizer report control (1)
009 Fixed totalizer report control (2)
010 Print control, Till timer
011 (future use)
012 (future use)
013 Communication control
014 Print control (currency exchange totalizers)
015 Report control (1)
016 Report control (2)
017 Report control (3), Money declaration
018 Slip/Guest/KP print
019 Order control
Rec No. Contents
020 (future use)
021 Message control
022 (future use)
023 (future use)
024 (future use)
025 Condiment
026 Check tracking
027 Clerk control
028 Euro (definition, exchange rate)
029 Euro (display, rounding)
030 Internal thermal printer control
031 Scanning PLU
032 Direct maintenance PLU
033 Batch PLU maintenance
034 Backlight control
035 (future use)
036 Store/Recall range
037 Auto check range
05
Program
202
Appendix (File record format)
Report header file
Report header
File name: Report header File No.: 024 Max. allocatable records: 27 (fixed)
Tax table file
Tax table
File name: Tax table File No.: 025 Max. allocatable records: 10
Set menu table file
Set menu table
File name: Set menu table File No.: 028 Max. allocatable records: 999
012
Character
04678 10 12 1415 7274
Max. table
amount
Rate
Rounding
Cal. type
Sum. of cyclic
patterns
No. of cyclic
patterns
Sum. of non-
cyclic patterns
Actual value 1
Actual value 60
034781112 5960
Rec No./
random code (1)
File No. (1)
Rec No./
random code (2)
File No. (2)
Rec No./
random code (3)
File No. (3)
Rec No./
random code (15)
File No. (15)
See page nn of this manual for the detail of each record.
Special character file
Special character
File name: Special character File No.: 023 Max. allocatable records: 42 (fixed)
016
Character
See page nn of this manual for the detail of each record.
Appendix (File record format)
TE-2200/2400 Dealer's Manual 203
Batch X/Z file
Batch X/Z
File name: Batch X/Z File No.: 029 Max. allocatable records: 10
Receipt message file
Receipt message
File name: Receipt message File No.: 032 Max. allocatable records: 42
Check endorsement message file
Check endorsement message
File name: Check endorsement message File No.: 033 Max. allocatable records: 4
Slip/external printer message file
Slip/external printer message
File name: Slip/external printer message File No.: 034 Max. allocatable records: 42
024
Character
040
Character
040
Character
Rec No. Message
1 ~ 4 Receipt logo message
5 ~ 8 Receipt commercial message
9 ~ 12 Receipt bottom message
13 ~ 16 Bill top message
17 ~ 20 Bill copy message
21 ~ 24 Bill bottom message
25 Post receipt message
26 ~ 29 Guest/slip intermediate message
30 ~ 39 Guest bottom message
40 ~ 42 Australian MOF message
Rec No. Message
1 ~ 4 Receipt logo message
5 ~ 8 Receipt/slip commercial message
9 ~ 12 Receipt/slip bottom message
13 ~ 16 Bill top message
17 ~ 20 Bill copy message
21 ~ 24 Bill bottom message
25 Post receipt message
26 ~ 29 Guest/slip intermediate message
30 ~ 39 Guest bottom message
40 ~ 42 Australian MOF message
0121415161718192021 2223 24
Character
Mode
X/Z code (1)
X/Z code (2)
X/Z code (3)
X/Z code (4)
X/Z code (5)
X/Z code (6)
X/Z code (7)
X/Z code (8)
X/Z code (9)
X/Z code (10)
204
Appendix (File record format)
Arrangement file
Arrangement file
File name: Arrangement File No.: 038 Max. allocatable records: 9999
Character recall file
Character recall
File name: Character recall File No.: 039 Max. allocatable records: 999
Check print file
Check print
File name: Check print File No.: 041 Max. allocatable records: 9
Scheduler file
Scheduler
File name: Scheduler File No.: 062 Max. allocatable records: 99
040
Character
01234567 891011
Flag
Key code (1)
Key code (2)
Key code (3)
Key code (4)
Key code (5)
Key code (6)
Key code (7)
Key code (8)
Key code (9)
Key code (10)
03
Program
03 10 15 22
Job Date/ Work
time
Type
Appendix (File record format)
TE-2200/2400 Dealer's Manual 205
System files
Character key table file
File name: Character key table File No.: 046 Max. allocatable records: depends on the model
Key/character key table record No.
TE-2200
TE-2400 (Eu)
No character can be programmed to shadowed keys.
063 056 054 052 046 040 034 028 022 016 010 004
068 062 057 055 053 051 045 039 033 027 021 015 009 003
067 061 050 044 038 032 026 020 014 008 002
066 060 049 043 037 031 025 019 013 007 001
065 059 048 042 036 030 024 018 012 006
064 058 047 041 035 029 023 017 011 005
C
789
456
123
0
RECEIPT
FEED
JOURNAL
FEED
007 014 021 028 035 042 049 056 063 070 077
006 013 020 027 034 041 048 055 062 069 076
005 012 019 026 033 040 047 054 061 068 075
004 011 018 025 032 039 046 053 060 067 074
003 010 017 024 031 038 045 052 059 066 073
002 009 016 023 030 037 044 051 058 065 072
001 008 015 022 029 036 043 050 057 064 071
C
789
456
123
0
RECEIPT
FEED
JOURNAL
FEED
0246
1st character
code
2nd character
code
3rd character
code
TE-2400 (US)
007 014 021 028 035 042 049 056 063 070
006 013 020 027 034 041 048 055 062 069
005 012 019 026 033 040 047 054 061 068
004 011 018 025 032 039 046 053 060 067
003 010 017 024 031 038 045 052 059 066
002 009 016 023 030 037 044 051 058 065
001 008 015 022 029 036 043 050 057 064
C
789
456
123
0
RECEIPT
FEED
JOURNAL
FEED
206
Appendix (File record format)
Key table file
File name: Character key table File No.: 074 Max. allocatable records: depends on the model
Key/key table record No.
TE-2200
TE-2400 (Eu)
The shadowed key cannot be programmed with any other function keys.
071 064 062 060 054 048 042 036 030 024 018
081 076 070 065 063 061 059 053 047 041 035 029 023 017
080 075 069 058 052 046 040 034 028 022 015
079 074 068 057 051 045 039 033 027 014 016
078 073 067 056 050 044 038 032 026 020 021
077 072 066 011 012 055 049 043 037 031 025 019 013
C
789
456
123
0
RECEIPT
FEED
JOURNAL
FEED
038 045 052 059 066 073 080 087 094 101 108 031 029 026
037 044 051 058 065 072 079 086 093 100 107 030 028 025 023 019
036 043 050 057 064 071 078 085 092 099 106 027 024 022 018
035 042 049 056 063 070 077 084 091 098 105 021 017
034 041 048 055 062 069 076 083 090 097 104 020 015
033 040 047 054 061 068 075 082 089 096 103 014 016
032 039 046 053 060 067 074 081 088 095 102 011 012 013
C
789
456
123
0
RECEIPT
FEED
JOURNAL
FEED
034781112151619202324
Record No./random
PLU code
File No.
Record No./random
PLU code
File No.
Record No./random
PLU code
File No.
Record No./random
PLU code
File No.
Record No./random
PLU code
File No.
Record No./random
PLU code
File No.
TE-2400 (US)
045 052 059 066 073 080 087 094 101 108 038 036 033 030
044 051 058 065 072 079 086 093 100 107 037 035 032 029 023 019
043 050 057 064 071 078 085 092 099 106 027 031 028 022 018
042 049 056 063 070 077 084 091 098 105 027 021 017
041 048 055 062 069 076 083 090 097 104 026 020 015
040 047 054 061 068 075 082 089 096 103 025 014 016
039 046 053 060 067 074 081 088 095 102 011 012 024 013
C
789
456
123
0
RECEIPT
FEED
JOURNAL
FEED
Appendix (File record format)
TE-2200/2400 Dealer's Manual 207
Terminal connection table file
File name: Terminal connection table File No.: 091 Max. allocatable records: 1
Printer connection table
File name: Printer definition table File No.: 093 Max. allocatable records: 7
Operation start date file
File name: Operation start date File No.: 094 Max. allocatable records: 1 (fixed)
Initialize code file
File name: Initialize code File No.: 095 Max. allocatable records: 1 (fixed)
012345
Type
Main prt ID
Main printer
Backup prt ID
Backup printer
07
Program
04
Operation
start date
0812
Machine ID.
character
Program
208
Appendix (File record format)
08
Character
04
Program
048
Program
02 456 911
Error code
Job No.
Source terminal
Target terminal
Date
Time
062
Character
AT command file
File name: AT command File No.: 096 Max. allocatable records: 2 (fixed)
Online password file
File name: Online password File No.: 097 Max. allocatable records: 1
I/O parameter table file
File name: I/O parameter table File No.: 098 Max. allocatable records: 2 (fixed)
System error log file
File name: System error log File No.: 099 Max. allocatable records: 99
Graphic image files
Graphic logo file
File name: Graphic logo File No.: 047 Max. allocatable records: 168 (fixed)
Graphic logo file (for external printer)
File name: Graphic logo File No.: 067 Max. allocatable records: 168 (fixed)
Watermark print file
File name: Watermark print File No.: 068 Max. allocatable records: 168 (fixed)
Appendix (File record format)
TE-2200/2400 Dealer's Manual 209
Guidance message files
Error message file
File name: Error message File No.: 080 Max. allocatable records: 191(fixed)
016
Character
Rec-No. Meaning Default (English) message
001 Error code (do NOT change)
002 Mode switch position changed before finalization.
003 Error code (do NOT change)
004 Clerk button pressed before finalization of a registration being performed under another clerk
button. The signed on clerk differs from the clerk performed the tracking check registration.
005 Error code (do NOT change)
006 Initialization or unit lock clear operation in progress.
007 Error code (do NOT change)
008 Memory allocation exceeds total memory capacity. (1/2)
009 Memory allocation exceeds total memory capacity. (2/2)
010 Error code (do NOT change)
011 Registration without entering a clerk number.
012 Error code (do NOT change)
013 Operation without entering the password.
014 Error code (do NOT change)
015 The drawer is left open longer than the program time (drawer open alarm).
016 Error code (do NOT change)
017 Attempt to register while the cash drawer is open.
018 Error code (do NOT change)
019 Journal paper near end. (option) (1/2)
020 Journal paper near end. (option) (2/2)
021 Error code (do NOT change)
022 Two consecutive transactions attempted in the refund mode. (1/2)
023 Two consecutive transactions attempted in the refund mode. (2/2)
024 Error code (do NOT change)
025 Attempt made to register an item without inputting a check number. (1/2)
026 Attempt made to register an item without inputting a check number. (2/2)
027 Error code (do NOT change)
028 Attempt made to register an item without inputting a table number. (1/2)
029 Attempt made to register an item without inputting a table number. (2/2)
030 Error code (do NOT change)
031 Finalize operation attempted without entering the number of customer. (1/2)
032 Finalize operation attempted without entering the number of customer. (2/2)
033 Error code (do NOT change)
034 No department linked PLU is registered.
035 not used
036 not used
037 Error code (do NOT change)
038 Actual stock quantity becomes less than the minimum stock quantity.
039 Error code (do NOT change)
040 Actual stock quantity becomes/is negative.
041 Error code (do NOT change)
042 Scale read error/perform non-scale registration to scalable item. (1/2)
043 Scale read error/perform non-scale registration to scalable item. (2/2)
044 Error code (do NOT change)
045 No condiment/preparation PLU is registered. (1/2)
046 No condiment/preparation PLU is registered. (2/2)
047 Error code (do NOT change)
048 Item registration is prohibited, while partial tender. (1/2)
049 Item registration is prohibited, while partial tender. (2/2)
050 Error code (do NOT change)
051 Finalization of a transaction attempted without registering rate-tax. (1/2)
052 Finalization of a transaction attempted without registering rate-tax. (2/2)
E001
Wrong mode
E003
Wrong operator
E004
Error INIT/FC
E005
Insufficient m
emory
E008
Please sign on
E009
Enter password
E010
Close the drawer
E011
Close the drawer
E013
Journal paper ne
ar end
E016
Change back to R
EG mode
E017
Enter CHK/TBL nu
mber
E018
Enter Table numb
er
E019
Enter number of
customers
E021
No DEPT Link
E023
Stock shortage
E024
No stock
E025
Illegal scale re
ad or entry
E026
Enter condiment/
preparation PLU
E029
In the tender op
eration
E030
Press RATE TAX k
ey
E001
WRONG MODE
E003
WRONG OPERATOR
E004
ERROR INIT/FC
E005
INSUFFICIENT M
EMORY
E008
PLEASE SIGN ON
E009
ENTER PASSWORD
E010
CLOSE THE DRAWER
E011
CLOSE THE DRAWER
E013
JOURNAL PAPER NE
AR END
E016
CHANGE BACK TO R
EG MODE
E017
ENTER CHK/TBL NU
MBER
E018
ENTER TABLE NUMB
ER
E019
ENTER NUMBER OF
CUSTOMERS
E021
NO DEPT LINK
E023
STOCK SHORTAGE
E024
NO STOCK
E025
ILLEGAL SCALE RE
AD OR ENTRY
E026
ENTER CONDIMENT/
PREPARATION PLU
E029
IN THE TENDER OP
ERATION
E030
PRESS RATE TAX K
EY
210
Appendix (File record format)
Rec-No. Meaning Default (English) message
053 Error code (do NOT change)
054 Finalization of a transaction attempted without confirming the subtotal.
055 Error code (do NOT change)
056 Finalization of a transaction attempted without confirming of the food stamp subtotal.
057 Error code (do NOT change)
058 Finalize operation attempted without entering amount tender. (1/2)
059 Finalize operation attempted without entering amount tender. (2/2)
060 Error code (do NOT change)
061 Change amount exceeds preset limit. (1/2)
062 Change amount exceeds preset limit. (2/2)
063 Error code (do NOT change)
064 Contents of the drawer exceed programmed limit. (1/2)
065 Contents of the drawer exceed programmed limit. (2/2)
066 Error code (do NOT change)
067 High amount lock out/low digit lock out error (1/2)
068 High amount lock out/low digit lock out error (2/2)
069 Error code (do NOT change)
070 Read/reset operation without declaring cash in drawer.
This error appears only when this function is activated. (1/2)
071 Same as above (2/2)
072 Error code (do NOT change)
073 Attempt to register a new transaction without issuing a guest receipt. (1/2)
074 Attempt to register a new transaction without issuing a guest receipt. (2/2)
075 Error code (do NOT change)
076 Attempt to register a new transaction without validation.
077 Error code (do NOT change)
078 Validation paper (slip printer) has run out. (1/2)
079 Validation paper (slip printer) has run out. (2/2)
080 Error code (do NOT change)
081 Attempt to register a new transaction without printing check.
082 Error code (do NOT change)
083 Attempt to register a new transaction without printing check endorsement. (1/2)
084 Attempt to register a new transaction without printing check endorsement. (2/2)
085 Error code (do NOT change)
086 Registration buffer full. Separate check buffer full.
087 Error code (do NOT change)
088 Attempt to register a new transaction without printing slip.
089 Error code (do NOT change)
090 No paper is inserted or paper is out in the slip printer. (1/2)
091 No paper is inserted or paper is out in the slip printer. (2/2)
092 Error code (do NOT change)
093 Check tracking index memory full. (1/2)
094 Check tracking index memory full. (2/2)
095 Error code (do NOT change)
096 Check tracking detail memory full. (1/2)
097 Check tracking detail memory full. (2/2)
098 Error code (do NOT change)
099 Attempt to made use <New Check> to open a new check using a number that is already
used for an existing check in check tracking memory. (1/2)
100 Same as above (2/2)
101 Error code (do NOT change)
102 Attempt to made use <Add Check>, <Separate Check> to open a check using a number
that is already opened. (1/2)
103 Same as above (2/2)
104 Error code (do NOT change)
105 Attempt made to use <Old Check> reopen a new check using a number that is not used
for an existing check in check tracking memory. (1/2)
106 Same as above (2/2)
107 Error code (do NOT change)
108 Check number range over (1/2)
109 Check number range over (2/2)
110 Error code (do NOT change)
111 Normal registration is prohibited during separate check operation. (1/2)
112 Normal registration is prohibited during separate check operation. (2/2)
113 Error code (do NOT change)
114 Store/auto new check range full
E031
Press ST key
E032
Press FSST key
E033
Enter tendered a
mount
E035
Change amount ex
ceeds limit
E036
Remove money fro
m the drawer
E037
Digit or amount
limitation over
E038
Perform money de
claration
E040
Issue guest rece
ipt
E041
Print validation
E042
Insert VLD paper
and retry
E044
Print Cheque
E045
Print Check Endo
rsement
E046
REG buffer full
E047
Print bill
E048
Insert slip pape
r and retry
E049
Check memory ful
l
E050
DETAIL memory fu
ll
E051
CHK/TBL No. is o
ccupied
E052
CHK/TBL No. is B
usy
E053
CHK/TBL No. is n
ot opened
E054
Out of CHK/TBL N
o. range
E055
In the SEP CHK o
peration
E056
CHK range full
E031
PRESS ST KEY
E032
PRESS FSST KEY
E033
ENTER TENDERED A
MOUNT
E035
CHANGE AMOUNT EX
CEEDS LIMIT
E036
REMOVE MONEY FRO
M THE DRAWER
E037
DIGIT OR AMOUNT
LIMITATION OVER
E038
PERFORM MONEY DE
CLARATION
E040
ISSUE GUEST RECE
IPT
E041
PRINT VALIDATION
E042
INSERT VLD PAPER
AND RETRY
E044
PRINT CHEQUE
E045
PRINT CHECK ENDO
RSEMENT
E046
REG BUFFER FULL
E047
PRINT BILL
E048
INSERT SLIP PAPE
R AND RETRY
E049
CHECK MEMORY FUL
L
E050
DETAIL MEMORY FU
LL
E051
CHK/TBL NO. IS O
CCUPIED
E052
CHK/TBL NO. IS B
USY
E053
CHK/TBL NO. IS N
OT OPENED
E054
OUT OF CHK/TBL N
O. RANGE
E055
IN THE SEP CHK O
PERATION
E056
CHK RANGE FULL
Appendix (File record format)
TE-2200/2400 Dealer's Manual 211
Rec-No. Meaning Default (English) message
115 Error code (do NOT change)
116 Attempt to finalize a transaction without specifying <EAT-IN> or <TAKE-OUT>. (1/2)
117 Attempt to finalize a transaction without specifying <EAT-IN> or <TAKE-OUT>. (2/2)
118 Error code (do NOT change)
119 External printer offline
120 Error code (do NOT change)
121 External printer went down.
122 Error code (do NOT change)
123 External printer paper end (1/2)
124 External printer paper end (2/2)
125 Error code (do NOT change)
126 External printer is now printing.
127 Error code (do NOT change)
128 Printing buffer full (1/2)
129 Printing buffer full (2/2)
130 Error code (do NOT change)
131 Attempt to finalize a transaction when balance is less than or equal to zero. (1/3)
132 Attempt to finalize a transaction when balance is less than or equal to zero. (2/3)
133 Attempt to finalize a transaction when balance is less than or equal to zero. (3/3)
134 Error code (do NOT change)
135 Data exists in the consolidation file. (1/2)
136 Data exists in the consolidation file. (2/2)
137~138 not used
139 Error code (do NOT change)
140 Disable to read/reset or consolidate the not found PLU item.
141 Error code (do NOT change)
142 Prohibit master operation. (1/2)
143 Prohibit master operation. (2/2)
144 Error code (do NOT change)
145 Scanning PLU direct maintenance/batch maintenance file becomes full. (1/3)
146 Scanning PLU direct maintenance/batch maintenance file becomes full. (2/3)
147 Scanning PLU direct maintenance/batch maintenance file becomes full. (3/3)
148 Error code (do NOT change)
149 Not found PLU file becomes full. (1/3)
150 Not fount PLU file becomes full. (2/3)
151 Not found PLU file becomes full. (3/3)
152 Error code (do NOT change)
153 Scanning PLU/not found PLU file full
154 Error code (do NOT change)
155 Network startup error. (1/2)
156 Network startup error. (2/2)
157~158 not used
159 Error code (do NOT change)
160 Attempt to register <–> or <CPN> when the balance becomes negative. (1/2)
161 Attempt to register <–> or <CPN> when the balance becomes negative. (2/2)
162~164 not used
165 Error code (do NOT change)
166 Arrangement file is full. (1/2)
167 Arrangement file is full. (2/2)
168~169 not used
170 Error code (do NOT change)
171 No CF card is set.
172 Error code (do NOT change)
173
Can not read, because no designated file is in the CF card or internal flash memory.
174 Error code (do NOT change)
175 Insufficient memory in the CF card or internal flash memory. (1/2)
176 Insufficient memory in the CF card or internal flash memory. (2/2)
177 Error code (do NOT change)
178 Write protect switch of the CF card is on. (1/2)
179 Write protect switch of the CF card is on. (2/2)
180 Error code (do NOT change)
181 Can not write, because designated file has already been in the CF card or internal
flash memory. (1/2)
182 Same as above (2/2)
E059
Press EAT-IN or
TAKE-OUT key
E060
Printer offline
E061
Printer error
E062
Printer paper en
d
E063
Printer busy
E064
Print buffer ful
l
E075
Negative balance
cannot be final
ized
E085
Data exist in co
nsolidation file
E099
Check NFP items
E100
Operate at the M
aster terminal
E101
PLU maintenance
file full. Press
<#2> to exit.
E102
NFP maintenance
file full. Press
<#2> to exit.
E105
PLU file full
E121
Inline startup e
rror
E139
Negative balance
is not allowed
E146
Arrangement file
full
E170
Insert CF card
E202
File not found
E203
Insufficient mem
ory
E204
Check the write
protect switch
E205
File already exi
st
E059
PRESS EAT-IN OR
TAKE-OUT KEY
E060
PRINTER OFFLINE
E061
PRINTER ERROR
E062
PRINTER PAPER EN
D
E063
PRINTER BUSY
E064
PRINT BUFFER FUL
L
E075
NEGATIVE BALANCE
CANNOT BE FINAL
IZED
E085
DATA EXIST IN CO
NSOLIDATION FILE
E099
CHECK NFP ITEMS
E100
OPERATE AT THE M
ASTER TERMINAL
E101
PLU MAINTENANCE
FILE FULL. PRESS
<#2> TO EXIT.
E102
NFP MAINTENANCE
FILE FULL. PRESS
<#2> TO EXIT.
E105
PLU FILE FULL
E121
INLINE STARTUP E
RROR
E139
NEGATIVE BALANCE
IS NOT ALLOWED
E146
ARRANGEMENT FILE
FULL
E170
INSERT CF CARD
E202
FILE NOT FOUND
E203
INSUFFICIENT MEM
ORY
E204
CHECK THE WRITE
PROTECT SWITCH
E205
FILE ALREADY EXI
ST
212
Appendix (File record format)
Rec-No. Meaning Default (English) message
183 Error code (do NOT change)
184 Attempt to print the last separated transaction on slip. (1/3)
185 Attempt to print the last separated transaction on slip. (2/3)
186 Attempt to print the last separated transaction on slip. (3/3)
187 Error code (do NOT change)
188 Printer error: Paper jam, Printer head is released. (1/2)
189 Printer error: Paper jam, Printer head is released. (2/2)
190 Error code (do NOT change)
191 Flash memory format is illegal.
192 Error code (do NOT change)
193 This sheet holder is prohibited by PGM.
194 Error code (do NOT change)
195 Employee No. is not found. (1/3)
196 Employee No. is not found. (2/3)
197 Employee No. is not found. (3/3)
198 Error code (do NOT change)
199 This employee is not clocking in. (1/2)
200 This employee is not clocking in. (2/2)
201 Error code (do NOT change)
202 This employee No. is used on another terminal. (1/2)
203 This employee No. is used on another terminal. (2/2)
204 Error code (do NOT change)
205 Time & attendance file becomes full. (1/2)
206 Time & attendance file becomes full. (2/2)
207 Error code (do NOT change)
208 Time & attendance data communication error (1/3)
209 Time & attendance data communication error (2/3)
210 Time & attendance data communication error (3/3)
211 Error code (do NOT change)
212 Communication error message with master terminal (1/3)
213 Communication error message with master terminal (2/3)
214 Communication error message with master terminal (3/3)
215 Error code (do NOT change)
216 Entered scanning PLU code is illegal or not found. (1/3)
217 Entered scanning PLU code is illegal or not found. (2/3)
218 Entered scanning PLU code is illegal or not found. (3/3)
219 CHK/TBL master is removed from the system. (1/4)
220 CHK/TBL master is removed from the system. (2/4)
221 CHK/TBL master is removed from the system. (3/4)
222 CHK/TBL master is removed from the system. (4/4)
223 Error code (do NOT change)
224 The terminal connected with the target printer is busy/down. (1/2)
225 The terminal connected with the target printer is busy/down. (2/2)
226 Error code (do NOT change)
227 The print buffer of the terminal connected with the target printer becomes full. (1/2)
228 The print buffer of the terminal connected with the target printer becomes full. (2/2)
229 Error code (do NOT change)
230 Receipt/order print error (1/3)
231 Receipt/order print error (2/3)
232 Receipt/order print error (3/3)
233 Error code (do NOT change)
234 Journal paper end (1/2)
235 Journal paper end (2/2)
236 Error code (do NOT change)
237 Receipt paper end (1/2)
238 Receipt paper end (2/2)
E066
Print from the b
eginning of the
transaction
E015
Check R/J printe
r
E201
Illegal Format
E140
Wrong menu
E164
Employee No. is
not Found in the
Employee File
E165
Employee No. is
not Clocking-in
E166
Employee No. is
Occupied
E176
Time&Attendance
file full
E177
Time&Attendance
Data Communicati
on Error
E110
Master is busy/d
own. Retry:<CA>
Remove:<ST>
E103
PLU Code is not
exist. Input PLU
Code
**Press<C>Key **
CHK/TBL Master i
s removed from s
ystem
E070
Target print ter
minal busy/down
E071
Target terminal
print BF full
E073
Your receipt/ord
er may not be is
sued
E012
Journal paper en
d
E013
Receipt paper en
d
E066
PRINT FROM THE B
EGINNING OF THE
TRANSACTION
E015
CHECK R/J PRINTE
R
E201
ILLEGAL FORMAT
E140
WRONG MENU
E164
EMPLOYEE NO. IS
NOT FOUND IN THE
EMPLOYEE FILE
E165
EMPLOYEE NO. IS
NOT CLOCKING-IN
E166
EMPLOYEE NO. IS
OCCUPIED
E176
TIME&ATTENDANCE
FILE FULL
E177
TIME&ATTENDANCE
DATA COMMUNICATI
ON ERROR
E110
MASTER IS BUSY/D
OWN. RETRY:<CA>
REMOVE:<ST>
E103
PLU CODE IS NOT
EXIST. INPUT PLU
CODE
**PRESS<C>KEY **
CHK/TBL MASTER I
S REMOVED FROM S
YSTEM
E070
TARGET PRINT TER
MINAL BUSY/DOWN
E071
TARGET TERMINAL
PRINT BF FULL
E073
YOUR RECEIPT/ORD
ER MAY NOT BE IS
SUED
E012
JOURNAL PAPER EN
D
E013
RECEIPT PAPER EN
D
Appendix (File record format)
TE-2200/2400 Dealer's Manual 213
Miscellaneous message file
File name: Miscellaneous message File No.: 078 Max. allocatable records: 58 (fixed)
016
Character
Rec-No. Meaning Default (English) message
001 Register total working time message
002 Register start date message
003 RAM message in PGM5
004 bytes message in PGM5
005 FILE message in PGM5
006 ROM version message
007 ROM label name message
008 IPL message while initial program loading
009 INIT message while initializing
010 FC message while flag clear
011 Error End message after completion of communication
012 Normal End message after completion of communication
013 not used
014 Separator of date symbol
015 Day of a week (monday)
016 Day of a week (tuesday)
017 Day of a week (wednesday)
018 Day of a week (thursday)
019 Day of a week (friday)
020 Day of a week (saturday)
021 Day of a week (sunday)
022 Communicating message
023 Program downloading/uploading message
024 Flash memory message
025 Inline message
026 Online COM1 port message
027 Job No. message
028 REG1 mode message in arrangement program
029 REG2 mode message in arrangement program
030 RF mode message in arrangement program
031 not used
032 X1 mode message in arrangement program
033 Z1 mode message in arrangement program
034 X2/Z2 mode message in arrangement program
035 Receipt on/off message in arrangement program
036 Menu sheet 1st page message in arrangement program
037 Menu sheet 2nd page message in arrangement program
038 Designation of sub currency to the Euro message
039 Designation of sub currency to the local money message
040 Daily read report message
042 Daily reset report message
042 Periodic 1 read report message
043 Periodic 1 reset report message
044 Periodic 2 read report message
045 Periodic 2 reset report message
046 Daily consolidation read report message
047 Daily consolidation reset report message
048 Periodic 1 consolidation read report message
049 Periodic 1 consolidation reset report message
050 Periodic 2 consolidation read report message
051 Periodic 2 consolidation reset report message
052 Model name (do NOT change)
053 Taxable amount 1 descriptor for Australian GST
054 Tax amount 1 descriptor for Australian GST
055 Main currency monetary symbol for Australian GST
056 Taxable 1 symbol for Australian GST
057 Subtotal key descriptor (display) for Australian GST
058 Delete file in the CF card.
GT TIME
START DATE
RAM
bytes
FILE
VER. :
LABEL:
IPL
INIT.:
FC :
Error End
Normal End
--
(MON)
(TUE)
(WED)
(THU)
(FRI)
(SAT)
(SUN)
----------------
AUTO PGM
FLASH
INLINE
COM1
JOB No.
REG1
REG2
RF
X1
Z1
X2/Z2
RCT ON/OFF
MENU-1
MENU-2
EURO money
LOCAL money
X
Z
XX1
ZZ1
XX2
ZZ2
CX
CZ
CXX1
CZZ1
CXX2
CZZ2
TAXABLE AMT
GST INCLUDED
$
*
RND/ST
DELETE
214
Appendix (File record format)
Printing guidance message file
File name: Printing guidance message File No.: 079 Max. allocatable records: 85(fixed)
024
Character
Rec-No. Meaning Default (English) message
001-4 not used
005 Direct maintenance result: success
006 Direct maintenance result: failure
006 Batch maintenance result: success
008 Batch maintenance result: failure
009-15 not used
016 Flash memory format result: success
017 Flash memory format result: failure
018-21 not used
022 PLU file reset result: success
023 PLU file reset result: failure
024-25 not used
026 Initialize AT command message
027 MODEM set message
028-31 not used
032 PLU reset result: success
033 PLU reset result: failure
034 Euro currency system setup message 1-1
035 Euro currency system setup message 1-2
036 Euro currency system setup message 1-3
037 Euro currency system setup message 1-4
038 Euro currency system setup message 1-5
039 Euro currency system setup message 1-6
040 Euro currency system setup message 1-7
041 Euro currency system setup message 1-8
042 Euro currency system setup message 2-1
043 Euro currency system setup message 2-2
044 Euro currency system setup message 2-3
045 Euro currency system setup message 2-4
046 Euro currency system setup message 2-5
047 Euro currency system setup message 2-6
048 Euro currency system setup message 2-7
049 Euro currency system setup message 2-8
050 Euro currency system setup message 2-9
051 Euro currency system setup message 2-10
052 Euro currency system setup message 2-11
053 Euro currency system setup message 2-12
054 Euro currency system setup message 2-13
055 Euro currency system setup message 3-1
056 Euro currency system setup message 3-2
057 Euro currency system setup message 3-3
058 Euro currency system setup message 3-4
059 Euro currency system setup message 4-1
060 Euro currency system setup message 4-2
061 Euro currency system setup message 4-3
062 Euro currency system setup message 4-4
063 Euro currency system setup message 6-1
064 Euro currency system setup message 6-2
065 Euro currency system setup message 6-3
066 Euro currency system setup message 6-4
067 Euro currency system setup message 6-5
068 Euro currency system setup message 6-6
069 Australian GST setup message
070 Euro currency system setup message 5-1
071 Euro currency system setup message 5-2
072 Euro currency system setup message 5-3
Direct Mainte Normal End
Direct Mainte Error End
Batch Mainte Normal End
Batch Mainte Error End
Format Normal End
Format Error End
PLU Reset Normal End
PLU Reset Error End
AT command initialize
Modem set
PLU Z clear Normal End
PLU Z clear Error End
EURO currency system
configuration setting
******* WARNING ********
This operation resets
all totalizers.
************************
OK :<#1>
CANCEL:<#2>
1.Main :LOCAL
Sub :EURO
Change:LOCAL
2.Main :LOCAL
Sub :EURO
Change:EURO
3.Main :EURO
Sub :LOCAL
Change:EURO
4.EURO only
Enter configuration No.
and press <#1> key.
CANCEL:<#2>
Enter EURO exchange rate
and press <#1> key.
ex) 1 EURO = ?.?????
CANCEL:<#2>
Enter drawer No. of sub
currency and press <#1>
key.
CANCEL:<#2>
EURO currency system was
changed.
1EURO=
Drawer No.=
All totalizers were re-
set.
GST system was changed.
Automatic UNIT PRICEs
change to EURO money.
OK:0<#1>
Appendix (File record format)
TE-2200/2400 Dealer's Manual 215
Rec-No. Meaning Default (English) message
073 Euro currency system setup message 5-4
074 Euro currency system setup message 5-5
075 Euro currency system setup message 6-7
076 Euro currency system setup message 6-8
077 Euro currency system setup message 7-1
078 Euro currency system setup message 7-2
079 -083 not used
084 Clock-in message
085 Clock-out message
086 CF card data save: success
087 CF card data save: failure
NO:1<#1>
CANCEL:<#2>
UNIT PRICEs were changed
to EURO.
UNIT PRICEs were not
changed to EURO.
CLOCK-IN
CLOCK-OUT
CF CARD Normal End
CF CARD Error End
216
Appendix (File record format)
X/Z guidance message file
File name: X/Z guidance message File No.: 082 Max. allocatable records: 48(fixed)
016
Character
Rec-No. Meaning Default (English) message
001 PLU range report message 1st line
002 Input start No. message 1st line
003 Input start No. message 2nd line
--- PLU range report message 1st line (quote from rec-001)
004 Input end No. message 1st line
005 Input end No. message 2nd line
006 PLU stock range report message 1st line
--- Input start No. message 1st line (quote from rec-002)
--- Input start No. message 2nd line (quote from rec-003)
--- PLU stock range report message 1st line (quote from rec-006)
--- Input end No. message 1st line (quote from rec-004)
--- Input end No. message 2nd line (quote from rec-005)
007 PLU individual group report message 1st line
008 Input target No. message 1st line
009 Input target No. message 2nd line
010 PLU individual department report message 1st line
--- Input target No. message 1st line (quote from rec-008)
--- Input target No. message 2nd line (quote from rec-009)
011 PLU individual subdepartment report message 1st line
--- Input target No. message 1st line (quote from rec-008)
--- Input target No. message 2nd line (quote from rec-009)
012 Group stock report message 1st line
--- Input target No. message 1st line (quote from rec-008)
--- Input target No. message 2nd line (quote from rec-009)
013 Department stock report message 1st line
--- Input target No. message 1st line (quote from rec-008)
--- Input target No. message 2nd line (quote from rec-009)
014 Subdepartment stock report message 1st line
--- Input target No. message 1st line (quote from rec-008)
--- Input target No. message 2nd line (quote from rec-009)
015 Individual clerk report message 1st line
--- Input target No. message 1st line (quote from rec-008)
--- Input target No. message 2nd line (quote from rec-009)
016 Scanning PLU by group report message 1st line
--- Input start No. message 1st line (quote from rec-002)
--- Input start No. message 2nd line (quote from rec-003)
--- Scanning PLU by group report message 1st line (quote from rec-016)
--- Input end No. message 1st line (quote from rec-004)
--- Input end No. message 2nd line (quote from rec-005)
017 Scanning PLU by department report message 1st line
--- Input start No. message 1st line (quote from rec-002)
--- Input start No. message 2nd line (quote from rec-003)
--- Scanning PLU by department report message 1st line (quote from rec-017)
--- Input end No. message 1st line (quote from rec-004)
--- Input end No. message 2nd line (quote from rec-005)
018 Scanning PLU by subdepartment report message 1st line
--- Input start No. message 1st line (quote from rec-002)
--- Input start No. message 2nd line (quote from rec-003)
--- Scanning PLU by subdepartment report message 1st line (quote from rec-018)
--- Input end No. message 1st line (quote from rec-004)
--- Input end No. message 2nd line (quote from rec-005)
PLU by range
Input start No.
and press <#1>
PLU by range
Input end No. an
d press <#1>
STOCK by RANGE
Input start No.
and press <#1>
STOCK by RANGE
Input end No. an
d press <#1>
PLU by GROUP
Input No. and pr
ess <#1>
PLU by DEPT
Input No. and pr
ess <#1>
PLU by SUBDEPT
Input No. and pr
ess <#1>
STOCK by GROUP
Input No. and pr
ess <#1>
STOCK by DEPT
Input No. and pr
ess <#1>
STOCK by SUBDEPT
Input No. and pr
ess <#1>
Individual CLK
Input No. and pr
ess <#1>
SCAN PLU by GP
Input start No.
and press <#1>
SCAN PLU by GP
Input end No. an
d press <#1>
SCAN PLU by DEPT
Input start No.
and press <#1>
SCAN PLU by DEPT
Input end No. an
d press <#1>
SCAN PLU by SDPT
Input start No.
and press <#1>
SCAN PLU by SDPT
Input end No. an
d press <#1>
[PLU BY RANGE]
INPUT START NO.
AND PRESS <#1>
[PLU BY RANGE]
INPUT END NO. AN
D PRESS <#1>
[STOCK BY RANGE]
INPUT START NO.
AND PRESS <#1>
[STOCK BY RANGE]
INPUT END NO. AN
D PRESS <#1>
[PLU BY GROUP]
INPUT NO. AND PR
ESS <#1>
[PLU BY DEPT]
INPUT NO. AND PR
ESS <#1>
[PLU BY SUBDEPT]
INPUT NO. AND PR
ESS <#1>
[STOCK BY GROUP]
INPUT NO. AND PR
ESS <#1>
[STOCK BY DEPT]
INPUT NO. AND PR
ESS <#1>
[STOCK BY SUBDEPT]
INPUT NO. AND PR
ESS <#1>
[INDIVIDUAL CLK]
INPUT NO. AND PR
ESS <#1>
[SCAN PLU BY GP]
INPUT START NO.
AND PRESS <#1>
[SCAN PLU BY GP]
INPUT END NO. AN
D PRESS <#1>
[SCAN PLU BY DEPT]
INPUT START NO.
AND PRESS <#1>
[SCAN PLU BY DEPT]
INPUT END NO. AN
D PRESS <#1>
[SCAN PLU BY SDPT]
INPUT START NO.
AND PRESS <#1>
[SCAN PLU BY SDPT]
INPUT END NO. AN
D PRESS <#1>
Appendix (File record format)
TE-2200/2400 Dealer's Manual 217
Rec-No. Meaning Default (English) message
019 PLU best report message 1st line
--- Input start No. message 1st line (quote from rec-002)
--- Input start No. message 2nd line (quote from rec-003)
--- PLU best report message 1st line (quote from rec-016)
--- Input end No. message 1st line (quote from rec-004)
--- Input end No. message 2nd line (quote from rec-005)
020 PLU inactive report message 1st line
--- Input start No. message 1st line (quote from rec-002)
--- Input start No. message 2nd line (quote from rec-003)
--- PLU inactive report message 1st line (quote from rec-020)
--- Input end No. message 1st line (quote from rec-004)
--- Input end No. message 2nd line (quote from rec-005)
021 not used
022 Scanning PLU reset message 1st line
023 Execution message
024 Cancellation message
025 NFP reset message 1st line
--- Execution message (quote from rec-023)
--- Cancellation message (quote from rec-024)
026 NFP file reset 1st message
--- Execution message (quote from rec-023)
--- Cancellation message (quote from rec-024)
027 NFP maintenance file reset message 1st line
--- Execution message (quote from rec-023)
--- Cancellation message (quote from rec-024)
028 PLU stock maintenance (addition) message 1st line
029 PLU stock maintenance (addition) message 2nd line
030 PLU stock maintenance (input new stock) message 1st line
031 PLU stock maintenance (input new stock) message 2nd line
032 Inline consolidation (terminal by terminal) message 1st line
033 Input target machine No. message 1st line
034 Input target machine No. message 2nd line
--- Inline consolidation message 1st line (quote from rec-032)
035 Input report code message 1st line
036 Input report code message 2nd line
037 Inline consolidation (all terminal) message 1st line
--- Input report code message 1st line (quote from rec-035)
--- Input report code message 2nd line (quote from rec-036)
038 PLU reset message 1st line
--- Execution message (quote from rec-023)
--- Cancellation message (quote from rec-024)
039 Reconnection master terminal message 1st line
040 Reconnection master terminal message 2nd line
041 Reconnection master terminal message 3rd line
042 Succeeded result message of master reconnection 1st line
043 Succeeded result message of master reconnection 2nd line
044 Failed result message of master reconnection 1st line
045 Failed result message of master reconnection 2nd line
046 Busy reset message 1st line
047 Busy reset message 2nd line
048 Busy reset message 3rd line
PLU BEST by DEPT
Input start No.
and press <#1>
PLU BEST by DEPT
Input end No. an
d press <#1>
PLU NON ACTIVE
Input start No.
and press <#1>
PLU NON ACTIVE
Input end No. an
d press <#1>
SCAN PLU Z clear
Start Yes:<#1>
No:<#2>
NFP Z clear
Start Yes:<#1>
No:<#2>
NFP reset
Start Yes:<#1>
No:<#2>
NFP MAINT reset
Start Yes:<#1>
No:<#2>
PLU STOCK
Add stock QTY
PLU STOCK
Input new QTY
---- INLINE ----
Input Term No. a
nd press <#2>
---- INLINE ----
Input Report COD
E and press <#1>
---- INLINE ----
Input Report COD
E and press <#1>
PLU Z clear
Start Yes:<#1>
No:<#2>
Master Connect
Start Yes:<#1>
No:<#2>
Master Connectio
n Normal End
Master Connectio
n Error End
Busy Reset
Input CHK/TBL# a
nd press <#1>
PLU BEST BY DEPT
INPUT START NO.
AND PRESS <#1>
PLU BEST BY DEPT
INPUT END NO. AN
D PRESS <#1>
PLU NON ACTIVE
INPUT START NO.
AND PRESS <#1>
PLU NON ACTIVE
INPUT END NO. AN
D PRESS <#1>
SCAN PLU Z CLEAR
START YES:<#1>
NO:<#2>
NFP Z CLEAR
START YES:<#1>
NO:<#2>
NFP RESET
START YES:<#1>
NO:<#2>
NFP MAINT RESET
START YES:<#1>
NO:<#2>
PLU STOCK
ADD STOCK QTY
PLU STOCK
INPUT NEW QTY
---- INLINE ----
INPUT TERM NO. A
ND PRESS <#2>
---- INLINE ----
INPUT REPORT COD
E AND PRESS <#1>
---- INLINE ----
INPUT REPORT COD
E AND PRESS <#1>
PLU Z CLEAR
START YES:<#1>
NO:<#2>
MASTER CONNECT
START YES:<#1>
NO:<#2>
MASTER CONNECTIO
N NORMAL END
MASTER CONNECTIO
N ERROR END
BUSY RESET
INPUT CHK/TBL# A
ND PRESS <#1>
218
Appendix (File record format)
Program guidance message file
File name: Program guidance message File No.: 083 Max. allocatable records: 93(fixed)
016
Character
Rec-No. Meaning Default (English) message
001 Range program message 1st line
002 Input start No. message 1st line
003 Input start No. message 2nd line
--- Range program message 1st line (quote from rec-001)
004 Input end No. message 1st line
005 Input end No. message 2nd line
--- Range program message 1st line (quote from rec-001)
006 Input program data message 1st line
007 Input program data message 2nd line
008 PLU direct maintenance message 1st line
009 Input PLU code message
--- PLU direct maintenance message 1st line (quote from rec-008)
010 Input unit price/quantity message
--- PLU direct maintenance message 1st line (quote from rec-008)
011 Input link department message
012 NFP maintenance activation message 1st line
013 Execution message
014 Cancellation message
015 NFP maintenance programming message 1st line
016 Input action code message 1st line
017 Input action code message 2nd line
--- NFP maintenance programming message 1st line (quote from rec-015)
018 Input PLU code message
--- NFP maintenance programming message 1st line (quote from rec-015)
--- Input unit price/quantity message (quote from rec-010)
--- NFP maintenance programming message 1st line (quote from rec-015)
--- Input link department message (quote from rec-011)
--- NFP maintenance programming message 1st line (quote from rec-015)
019 Input descriptor message
--- NFP maintenance programming message 1st line (quote from rec-015)
020 Input status message
--- NFP maintenance programming message 1st line (quote from rec-015)
021 Input bottle link message
--- NFP maintenance programming message 1st line (quote from rec-015)
022 Input mix & match link message
023 One touch NLU key program message 1st line
--- Input PLU code message (quote from rec-018)
--- One touch NLU key program message 1st line (quote from rec-023)
024 Designate NLU key message
025 Direct maintenance programming message 1st line
026 Input action code message
--- Direct maintenance programming message 1st line (quote from rec-025)
--- Input PLU code message (quote from rec-018)
--- Direct maintenance programming message 1st line (quote from rec-025)
--- Input unit price/quantity message (quote from rec-010)
--- Direct maintenance programming message 1st line (quote from rec-025)
--- Input link department message (quote from rec-011)
--- Direct maintenance programming message 1st line (quote from rec-025)
--- Input descriptor message (quote from rec-019)
--- Direct maintenance programming message 1st line (quote from rec-025)
--- Input status message (quote from rec-020)
--- Direct maintenance programming message 1st line (quote from rec-025)
--- Input bottle link message (quote from rec-021)
--- Direct maintenance programming message 1st line (quote from rec-025)
--- Input mix & match link message (quote from rec-022)
027 Batch maintenance activation message 1st line
--- Execution message (quote from rec-013)
--- Cancellation message (quote from rec-014)
Range PGM
Input start No.
and press <#1>
Range PGM
Input end No. an
d press <#1>
Range PGM
Input PGM data a
nd press <#1>
Direct Mainte
PLU Code ?
Direct Mainte
Unit Qty&Price ?
Direct Mainte
DEPT Linkage ?
NFP Maintenance
Start Yes:<#1>
No:<#2>
NFP Maintenance
Update:1 Delete
:2
NFP Maintenance
PLU Code ?
NFP Maintenance
Unit Qty&Price ?
NFP Maintenance
DEPT Linkage ?
NFP Maintenance
PLU Descriptor ?
NFP Maintenance
PLU Status ?
NFP Maintenance
Bottle Link ?
NFP Maintenance
Mix&Match Link ?
One touch NLU
PLU Code ?
One touch NLU
Press <NLU> Key
Direct Mainte
Add:0 Modify:1
Direct Mainte
PLU Code ?
Direct Mainte
Unit Qty&Price ?
Direct Mainte
DEPT Linkage ?
Direct Mainte
PLU Descriptor ?
Direct Mainte
PLU Status ?
Direct Mainte
Bottle Link ?
Direct Mainte
Mix&Match Link ?
Batch mainte
Start Yes:<#1>
No:<#2>
RANGE PGM
INPUT START NO.
AND PRESS <#1>
RANGE PGM
INPUT END NO. AN
D PRESS <#1>
RANGE PGM
INPUT PGM DATA A
ND PRESS <#1>
DIRECT MAINTE
PLU CODE ?
DIRECT MAINTE
UNIT QTY&PRICE ?
DIRECT MAINTE
DEPT LINKAGE ?
NFP MAINTENANCE
START YES:<#1>
NO:<#2>
NFP MAINTENANCE
UPDATE:1 DELETE
:2
NFP MAINTENANCE
PLU CODE ?
NFP MAINTENANCE
UNIT QTY&PRICE ?
NFP MAINTENANCE
DEPT LINKAGE ?
NFP MAINTENANCE
PLU DESCRIPTOR ?
NFP MAINTENANCE
PLU STATUS ?
NFP MAINTENANCE
BOTTLE LINK ?
NFP MAINTENANCE
MIX&MATCH LINK ?
ONE TOUCH NLU
PLU CODE ?
ONE TOUCH NLU
PRESS <NLU> KEY
DIRECT MAINTE
ADD:0 MODIFY:1
DIRECT MAINTE
PLU CODE ?
DIRECT MAINTE
UNIT QTY&PRICE ?
DIRECT MAINTE
DEPT LINKAGE ?
DIRECT MAINTE
PLU DESCRIPTOR ?
DIRECT MAINTE
PLU STATUS ?
DIRECT MAINTE
BOTTLE LINK ?
DIRECT MAINTE
MIX&MATCH LINK ?
BATCH MAINTE
START YES:<#1>
NO:<#2>
Appendix (File record format)
TE-2200/2400 Dealer's Manual 219
Rec-No. Meaning Default (English) message
028 Batch maintenance programming message 1st line
029 Input batch maintenance record No. message
--- Batch maintenance programming message 1st line (quote from rec-028)
030 Input action code message 1st line
031 Input action code message 2nd line
--- Batch maintenance programming message 1st line (quote from rec-028)
--- Input PLU code message (quote from rec-018)
--- Batch maintenance programming message 1st line (quote from rec-028)
--- Input unit price/quantity message (quote from rec-010)
--- Batch maintenance programming message 1st line (quote from rec-028)
--- Input link department message (quote from rec-011)
--- Batch maintenance programming message 1st line (quote from rec-028)
--- Input descriptor message (quote from rec-019)
--- Batch maintenance programming message 1st line (quote from rec-028)
--- Input status message (quote from rec-020)
--- Batch maintenance programming message 1st line (quote from rec-028)
--- Input bottle link message (quote from rec-021)
--- Batch maintenance programming message 1st line (quote from rec-028)
--- Input mix & match link message (quote from rec-022)
032 Tax table programming message 1st line
033 Input tax rate message 1st line
034 Input tax rate message 2nd line
--- Tax table programming message 1st line (quote from rec-032)
035 Input tax table maximum message 1st line
036 Input tax table maximum message 2nd line
037 Input tax table maximum message 3rd line
--- Tax table programming message 1st line (quote from rec-032)
038 Input rounding/calculation type message 1st line
039 Input rounding/calculation type message 2nd line
040 Input rounding/calculation type message 3rd line
--- Tax table programming message 1st line (quote from rec-032)
041 Input sum of cyclic patterns message 1st line
042 Input sum of cyclic patterns message 2nd line
043 Input sum of cyclic patterns message 3rd line
--- Tax table programming message 1st line (quote from rec-032)
044 Input No. of cyclic patterns message 1st line
045 Input No. of cyclic patterns message 2nd line
046 Input No. of cyclic patterns message 3rd line
--- Tax table programming message 1st line (quote from rec-032)
047 Input sum of non-cyclic values message 1st line
048 Input sum of non-cyclic values message 2nd line
049 Input sum of non-cyclic values message 3rd line
--- Tax table programming message 1st line (quote from rec-032)
050 Input actual values message 1st line
051 Input actual values message 2nd line
052 Input actual values message 3rd line
053 Mix & match programming message 1st line
054 Input discount amount message 1st line
055 Input discount amount message 2nd line
056 Input discount amount message 3rd line
--- Mix & match programming message 1st line (quote from rec-052)
057 Input status message 1st line
058 Input status message 2nd line
059 Memory allocation programming message 1st line
060 Input No. of records of file message 1st line
061 Input No. of records of file message 2nd line
062 Input No. of records of file message 3rd line
063 Program reading by range message 1st line
--- Input start No. message 1st line (quote from rec-002)
--- Input start No. message 2nd line (quote from rec-003)
--- Program reading by range message 1st line (quote from rec-03)
--- Input start No. message 1st line (quote from rec-002)
--- Input start No. message 2nd line (quote from rec-003)
Batch Mainte
REC# ?
Batch Mainte
Add:0 Modify:1
Delete:2
Batch Mainte
PLU Code ?
Batch Mainte
Unit Qty&Price ?
Batch Mainte
DEPT Linkage ?
Batch Mainte
PLU Descriptor ?
Batch Mainte
PLU Status ?
Batch Mainte
Bottle Link ?
Batch Mainte
Mix&Match Link ?
Tax table
Input tax rate a
nd press <#1>
Tax table
Input maximum ta
ble amount and p
ress <#1>
Tax table
Input rounding,
cal.type and pre
ss <#1>
Tax table
Input sum of cyc
lic patterns and
press <#1>
Tax table
Input No. of cyc
lic values and p
ress <#1>
Tax table
Input sum of non
-cyclic values a
nd press <#1>
Tax table
Input actual val
ues and press <#
1>
Mix&Match table
Input discount a
mount and press
<#1>
Mix&Match table
Input status and
press <#1>
Memory Alloc
Input No. of rec
ords and press <
#1>
PGM read
Input start No.
and press <#1>
PGM read
Input start No.
and press <#1>
BATCH MAINTE
REC# ?
BATCH MAINTE
ADD:0 MODIFY:1
DELETE:2
BATCH MAINTE
PLU CODE ?
BATCH MAINTE
UNIT QTY&PRICE ?
BATCH MAINTE
DEPT LINKAGE ?
BATCH MAINTE
PLU DESCRIPTOR ?
BATCH MAINTE
PLU STATUS ?
BATCH MAINTE
BOTTLE LINK ?
BATCH MAINTE
MIX&MATCH LINK ?
TAX TABLE
INPUT TAX RATE A
ND PRESS <#1>
TAX TABLE
INPUT MAXIMUM TA
BLE AMOUNT AND P
RESS <#1>
TAX TABLE
INPUT ROUNDING,
CAL.TYPE AND PRE
SS <#1>
TAX TABLE
INPUT SUM OF CYC
LIC PATTERNS AND
PRESS <#1>
TAX TABLE
INPUT NO. OF CYC
LIC VALUES AND P
RESS <#1>
TAX TABLE
INPUT SUM OF NON
-CYCLIC VALUES A
ND PRESS <#1>
TAX TABLE
INPUT ACTUAL VAL
UES AND PRESS <#
1>
MIX&MATCH TABLE
INPUT DISCOUNT A
MOUNT AND PRESS
<#1>
MIX&MATCH TABLE
INPUT STATUS AND
PRESS <#1>
MEMORY ALLOC
INPUT NO. OF REC
ORDS AND PRESS <
#1>
PGM READ
INPUT START NO.
AND PRESS <#1>
PGM READ
INPUT START NO.
AND PRESS <#1>
220
Appendix (File record format)
Rec-No. Meaning Default (English) message
064 Please wait message
065
066 Auto-program (register to register) message
067 Input target machine No. message 1st line
068 Input target machine No. message 2nd line
--- Auto-program (register to register) message (quote from rec-066)
069 Input command code message 1st line
070 Input command code message 2nd line
071 CF card formatting message 1st line
--- Execution message (quote from rec-013)
--- Cancellation message (quote from rec-014)
072 Internal flash memory formatting message 1st line
--- Execution message (quote from rec-013)
--- Cancellation message (quote from rec-014)
073 Auto-program (register to internal flash) message 1st line
074 Input command code message 1st line
075 Input command code message 2nd line
076 Auto-program (register to CF card) message 1st line
--- Input command code message 1st line (quote from rec-013)
--- Input command code message 2nd line (quote from rec-014)
077 Auto-program (CF card to register) message 1st line
--- Input command code message 1st line (quote from rec-074)
--- Input command code message 2nd line (quote from rec-075)
078 Auto-program (internal flash to register) message 1st line
--- Input command code message 1st line (quote from rec-074)
--- Input command code message 2nd line (quote from rec-075)
079 Auto-program (register to COM port) message 1st line
--- Input command code message 1st line (quote from rec-074)
--- Input command code message 2nd line (quote from rec-075)
080 Send IPL data to INLINE message 1st line
--- Input command code message 1st line (quote from rec-074)
--- Input command code message 2nd line (quote from rec-075)
081 Send IPL data to CF card message 1st line
--- Input command code message 1st line (quote from rec-074)
--- Input command code message 2nd line (quote from rec-075)
082 Send IPL data to COM port message 1st line
--- Input command code message 1st line (quote from rec-074)
--- Input command code message 2nd line (quote from rec-075)
083 Set AT command to MODEM message 1st line
--- Execution message (quote from rec-013)
--- Cancellation message (quote from rec-014)
084 Arrangement table program message
085
086 Setting the graphic logo to the external printer message
--- Execution message (quote from rec-013)
--- Cancellation message (quote from rec-014)
087 Error code
088 Error message 1st line of an attempt of adding an existing item in the PLU file
089 Error message 2nd line of an attempt of adding an existing item in the PLU file
090
Error message 1st line of an attempt of adding an existing item in the batch maintenance file
091
Error message 2nd line of an attempt of adding an existing item in the batch maintenance file
092
Error message 3rd line of an attempt of adding an existing item in the batch maintenance file
--- NFP Maintenance (quote from rec-015)
093 Field number inputting for partial maintenance
--- Direct Maintenance (quote from rec-025)
--- Field number inputting for partial maintenance (quote from rec 093)
--- Batch Maintenance (quote from rec-028)
--- Field number inputting for partial maintenance (quote from rec 093)
094 Restore from CF activation 1st line
095 Restore from CF activation 2nd line
096 Restore from CF activation 3rd line
097 Delete file from CF activation 1st line
--- Delete file from CF activation 2nd line (quote from rec 095)
--- Delete file from CF activation 3rd line (quote from rec 096)
--- Save to CF activation 1st line (quote from 076)
--- Save to CF activation 2nd line (quote from rec 013)
--- Save to CF activation 3rd line (quote from rec 014)
Please wait
INLINE AUTO PGM
Input Term/GP No
. and press <#2>
INLINE AUTO PGM
Input OPE CODE a
nd press <#1>
CF format
Start Yes:<#1>
No:<#2>
FLASH format
Start Yes:<#1>
No:<#2>
Save to FLASH
Input OPE CODE a
nd press <#1>
Save to CF
Start Yes:<#1>
No:<#2>
Restore CF
Input OPE CODE a
nd press <#1>
Restore FLASH
Input OPE CODE a
nd press <#1>
COM AUTO PGM
Input OPE CODE a
nd press <#1>
IPL to INLINE
Input OPE CODE a
nd press <#1>
IPL to CF
Input OPE CODE a
nd press <#1>
IPL to COM PORT
Input OPE CODE a
nd press <#1>
Modem Set
Start Yes:<#1>
No:<#2>
Arrange No. ?
Logo image set
Start Yes:<#1>
No:<#2>
E106
Item exists in t
he PLU FILE
PLU is occupied
Modify:<#1> Ski
p:<#2>
NFP Maintenance
Input Field No.
Direct Mainte
Input Field No.
Batch Mainte
Input Field No.
Restore CF
Select FILE NAME
and press <#1>
Delete CF
Select FILE NAME
and press <#1>
Save to CF
Start Yes:<#1>
No:<#2>
PLEASE WAIT
INLINE AUTO PGM
INPUT TERM/GP NO
. AND PRESS <#2>
INLINE AUTO PGM
INPUT OPE CODE A
ND PRESS <#1>
CF FORMAT
START YES:<#1>
NO:<#2>
FLASH FORMAT
START YES:<#1>
NO:<#2>
SAVE TO FLASH
INPUT OPE CODE A
ND PRESS <#1>
SAVE TO CF
START YES:<#1>
NO:<#2>
RESTORE CF
INPUT OPE CODE A
ND PRESS <#1>
RESTORE FLASH
INPUT OPE CODE A
ND PRESS <#1>
COM AUTO PGM
INPUT OPE CODE A
ND PRESS <#1>
IPL TO INLINE
INPUT OPE CODE A
ND PRESS <#1>
IPL TO CF
INPUT OPE CODE A
ND PRESS <#1>
IPL TO COM PORT
INPUT OPE CODE A
ND PRESS <#1>
MODEM SET
START YES:<#1>
NO:<#2>
ARRANGE NO. ?
LOGO IMAGE SET
START YES:<#1>
NO:<#2>
E106
ITEM EXISTS IN T
HE PLU FILE
PLU IS OCCUPIED
MODIFY:<#1> SKI
P:<#2>
NFP MAINTENANCE
INPUT FIELD NO.
DIRECT MAINTE
INPUT FIELD NO.
BATCH MAINTE
INPUT FIELD NO.
RESTORE CF
SELECT FILE NAME
AND PRESS <#1>
DELETE CF
SELECT FILE NAME
AND PRESS <#1>
SAVE TO CF
START YES:<#1>
NO:<#2>
Appendix (File record format)
TE-2200/2400 Dealer's Manual 221
Registration guidance message file
File name: Registration guidance message File No.: 081 Max. allocatable records: 23(fixed)
016
Character
Rec-No. Meaning Default (English) message
001 Guidance message of registering not found PLU 1st line
002 Guidance message of registering not found PLU 2nd line
003 Guidance message of registering not found PLU 3rd line
004 Guidance message of registering not found PLU 4th line
005 Guidance message of backup printing of order 1st line
006 Guidance message of backup printing of order 2nd line
007 Guidance message of backup printing of order 3rd line
008 Guidance message of scanning PLU price input compulsory 1st line
009 Guidance message of scanning PLU price input compulsory 2nd line
010 Guidance message of scanning PLU price input compulsory 3rd line
011 Guidance message of scanning PLU price input compulsory 4th line
012 (not used)
013 (not used)
014 (not used)
015 (not used)
016 Guidance message of registering employee 1st line
017 Guidance message of registering employee 1st line
018 Guidance message of registering employee 3rd line
019 Guidance message of registering employee 4th line
020 Guidance message of clock-in operation 1st line
021 Guidance message of clock-in operation 2nd line
022 Guidance message of clock-out operation 1st line
023 Guidance message of clock-out operation 2nd line (quote from rec-021)
Not Found PLU
Input Unit Price
,and Press DEPT
Key
Backup Print
<CA>:Backup <ST>
:Retry
Price Entry
Input Unit Price
, and Press <PRC
> key
Time&Attendance
Input EMPLOYEE N
o. and press <CL
OCK-IN/OUT>
CLOCK-IN OK?
Yes:<CA> No:<ST>
CLOCK-OUT OK?
Yes:<CA> No:<ST>
NOT FOUND PLU
INPUT UNIT PRICE
,AND PRESS DEPT
KEY
BACKUP PRINT
<CA>:BACKUP <ST>
:RETRY
PRICE ENTRY
INPUT UNIT PRICE
, AND PRESS <PRC
> KEY
TIME&ATTENDANCE
INPUT EMPLOYEE N
O. AND PRESS <CL
OCK-IN/OUT>
CLOCK-IN OK?
YES:<CA> NO:<ST>
CLOCK-OUT OK?
YES:<CA> NO:<ST>
222
Appendix (File record format)
Help message file
File name: Help message File No.: 085 Max. allocatable records: 199 (fixed)
Note: It is necessary to allocate this file, if you want to make your original help.
Rec-No. Meaning Default (English) message
001 Header message of help receipt (1/19)
002 Header message of help receipt (2/19)
003 Header message of help receipt (3/19)
004 Header message of help receipt (4/19)
005 Header message of help receipt (5/19)
006 Header message of help receipt (6/19)
007 Header message of help receipt (7/19)
008 Header message of help receipt (8/19)
009 Header message of help receipt (9/19)
010 Header message of help receipt (10/19)
011 Header message of help receipt (11/19)
012 Header message of help receipt (12/19)
013 Header message of help receipt (13/19)
014 Header message of help receipt (14/19)
015 Header message of help receipt (15/19)
016 Header message of help receipt (16/19)
017 Header message of help receipt (17/19)
018 Header message of help receipt (18/19)
019 Header message of help receipt (19/19)
020 First help item message (1/17)
021 First help item message (2/17)
022 First help item message (3/17)
023 First help item message (4/17)
024 First help item message (5/17)
025 First help item message (6/17)
026 First help item message (7/17)
027 First help item message (8/17)
028 First help item message (9/17)
029 First help item message (10/17)
030 First help item message (11/17)
031 First help item message (12/17)
032 First help item message (13/17)
033 First help item message (14/17)
034 First help item message (15/17)
035 First help item message (16/17)
036 First help item message (17/17)
037 Second help item message (1/53)
038 Second help item message (2/53)
039 Second help item message (3/53)
040 Second help item message (4/53)
041 Second help item message (5/53)
042 Second help item message (6/53)
043 Second help item message (7/53)
044 Second help item message (8/53)
045 Second help item message (9/53)
046 Second help item message (10/53)
047 Second help item message (11/53)
048 Second help item message (12/53)
049 Second help item message (13/53)
ENTER NUMBER THEN
PRESS <HELP> KEY.
01:HOW TO PROGRAM
DATE AND TIME?
02:UNIT PRICE FOR
DEPARTMENTS AND PLUS
03:HOW TO PROGRAM
TAX TABLE?
04:HOW TO REPLACE
PAPER ROLL?
05:HOW TO TAKE REPORTS?
01:HOW TO PROGRAM
DATE AND TIME?
1)TURN MODE KEY TO PGM.
2)ENTER HHMM
PRESS <X> KEY.
3)PRESS <C> KEY.
4)ENTER YYMMDD
PRESS <X> KEY.
5)PRESS <C> KEY.
02:UNIT PRICE FOR
DEPARTMENTS AND PLUS
A)SET UP UNIT PRICES FOR
DEPARTMENTS
<DEPT> MEANS DEPARTMENT
KEY.
1)TURN MODE KEY TO PGM.
2)ENTER xxxxxx
THEN PRESS <DEPT>.
<X/FOR> instead of <X> for the U.S.
<X/FOR> instead of <X> for the U.S.
024
Character
Appendix (File record format)
TE-2200/2400 Dealer's Manual 223
Rec-No. Meaning Default (English) message
050 Second help item message (14/53)
051 Second help item message (15/53)
052 Second help item message (16/53)
053 Second help item message (17/53)
054 Second help item message (18/53)
055 Second help item message (19/53)
056 Second help item message (20/53)
057 Second help item message (21/53)
058 Second help item message (22/53)
059 Second help item message (23/53)
060 Second help item message (24/53)
061 Second help item message (25/53)
062 Second help item message (26/53)
063 Second help item message (27/53)
064 Second help item message (28/53)
065 Second help item message (29/53)
066 Second help item message (30/53)
067 Second help item message (31/53)
068 Second help item message (32/53)
069 Second help item message (33/53)
070 Second help item message (34/53)
071 Second help item message (35/53)
072 Second help item message (36/53)
073 Second help item message (37/53)
074 Second help item message (38/53)
075 Second help item message (39/53)
076 Second help item message (40/53)
077 Second help item message (41/53)
078 Second help item message (42/53)
079 Second help item message (43/53)
080 Second help item message (44/53)
081 Second help item message (45/53)
082 Second help item message (46/53)
083 Second help item message (47/53)
084 Second help item message (48/53)
085 Second help item message (49/53)
086 Second help item message (50/53)
087 Second help item message (51/53)
088 Second help item message (52/53)
089 Second help item message (53/53)
090 Third help item message (1/26)
091 Third help item message (2/26)
092 Third help item message (3/26)
093 Third help item message (4/26)
094 Third help item message (5/26)
095 Third help item message (6/26)
096 Third help item message (7/26)
097 Third help item message (8/26)
098 Third help item message (9/26)
099 Third help item message (10/26)
100 Third help item message (11/26)
101 Third help item message (12/26)
102 Third help item message (13/26)
103 Third help item message (14/26)
104 Third help item message (15/26)
105 Third help item message (16/26)
106 Third help item message (17/26)
107 Third help item message (18/26)
108 Third help item message (19/26)
109 Third help item message (20/26)
110 Third help item message (21/26)
3)REPEAT 2).
4)PRESS <SUBTOTAL>.
B)SET UP UNIT PRICES FOR
PLUS
1)TURN MODE KEY TO PGM.
2)ENTER nnnn
THEN PRESS <PLU>.
nnnn=PLU No.
3)ENTER xxxxxx
PRESS <CASH>.
4)REPEAT 2),3)
5)PRESS <SUBTOTAL>.
xxxxxx IS AN UNIT PRICE
YOU WANT TO SET UP.
AN UNIT PRICE MUST BE
WITHIN THE RANGE OF
0.01-9999.99
03:HOW TO PROGRAM
TAX TABLE?
1)TURN MODE KEY TO PGM
2)ENTER 3 THEN PRESS
<SUBTOTAL> KEY.
3)ENTER 0125 THEN PRESS
<SUBTOTAL> KEY.
4)XX.XXXX <CASH> KEY
5)0 <CASH> KEY
6)YYZZ <CASH> KEY
7)PRESS <SUBTOTAL> KEY.
XX.XXXX=RATE
YY=00(CUT OFF)
224
Appendix (File record format)
Rec-No. Meaning Default (English) message
111 Third help item message (22/26)
112 Third help item message (23/26)
113 Third help item message (24/26)
114 Third help item message (25/26)
115 Third help item message (26/26)
116 Fourth help item message (1/20)
117 Fourth help item message (2/20)
118 Fourth help item message (3/20)
119 Fourth help item message (4/20)
120 Fourth help item message (5/20)
121 Fourth help item message (6/20)
122 Fourth help item message (7/20)
123 Fourth help item message (8/20)
124 Fourth help item message (9/20)
125 Fourth help item message (10/20)
126 Fourth help item message (11/20)
127 Fourth help item message (12/20)
128 Fourth help item message (13/20)
129 Fourth help item message (14/20)
130 Fourth help item message (15/20)
131 Fourth help item message (16/20)
132 Fourth help item message (17/20)
133 Fourth help item message (18/20)
134 Fourth help item message (19/20)
135 Fourth help item message (20/20)
136 Fifth help item message (1/64)
137 Fifth help item message (2/64)
138 Fifth help item message (3/64)
139 Fifth help item message (4/64)
140 Fifth help item message (5/64)
141 Fifth help item message (6/64)
142 Fifth help item message (7/64)
143 Fifth help item message (8/64)
144 Fifth help item message (9/64)
145 Fifth help item message (10/64)
146 Fifth help item message (11/64)
147 Fifth help item message (12/64)
148 Fifth help item message (13/64)
149 Fifth help item message (14/64)
150 Fifth help item message (15/64)
151 Fifth help item message (16/64)
152 Fifth help item message (17/64)
153 Fifth help item message (18/64)
154 Fifth help item message (19/64)
155 Fifth help item message (20/64)
156 Fifth help item message (21/64)
157 Fifth help item message (22/64)
158 Fifth help item message (23/64)
159 Fifth help item message (24/64)
160 Fifth help item message (25/64)
161 Fifth help item message (26/64)
162 Fifth help item message (27/64)
163 Fifth help item message (28/64)
164 Fifth help item message (29/64)
165 Fifth help item message (30/64)
166 Fifth help item message (31/64)
167 Fifth help item message (32/64)
168 Fifth help item message (33/64)
169 Fifth help item message (34/64)
170 Fifth help item message (35/64)
171 Fifth help item message (36/64)
YY=50(ROUND OFF)
YY=90(ROUND UP)
ZZ=02(ADD-ON)
ZZ=03(VAT)
04:HOW TO REPLACE
PAPER ROLL?
1)TAKE PRINTER COVER OUT
2)PULL UP PLATEN ARM.
3)LOAD PAPER ROLL FROM
BOTTOM UP.
4)PULL DOWN PLATEN ARM.
5)REPLACE PRINTER COVER.
05:HOW TO TAKE REPORTS?
YOU CAN TAKE THE
FOLLOWING REPORTS.
1)DAILY X REPORT
PRESS <CASH> KEY @X MODE
2)DAILY Z REPORT
PRESS <CASH> KEY @Z MODE
3)PERIODIC1 X REPORT
100 <CASH> KEY @ X2/Z2
MODE
4)PERIODIC1 Z REPORT
1100 <CASH> KEY @ X2/Z2
MODE
5)PERIODIC2 X REPORT
200 <CASH> KEY @ X2/Z2
MODE
6)PERIODIC2 Z REPORT
1200 <CASH> KEY @ X2/Z2
MODE
7)PLU X REPORT
14 <CASH> KEY @ X MODE
8)PLU Z REPORT
14 <CASH> KEY @ Z MODE
9)HOURLY X REPORT
19 <CASH> KEY @ X MODE
Appendix (File record format)
TE-2200/2400 Dealer's Manual 225
Rec-No. Meaning Default (English) message
172 Fifth help item message (37/64)
173 Fifth help item message (38/64)
174 Fifth help item message (39/64)
175 Fifth help item message (40/64)
176 Fifth help item message (41/64)
177 Fifth help item message (42/64)
178 Fifth help item message (43/64)
179 Fifth help item message (44/64)
180 Fifth help item message (45/64)
181 Fifth help item message (46/64)
182 Fifth help item message (47/64)
183 Fifth help item message (48/64)
184 Fifth help item message (49/64)
185 Fifth help item message (50/64)
186 Fifth help item message (51/64)
187 Fifth help item message (52/64)
188 Fifth help item message (53/64)
189 Fifth help item message (54/64)
190 Fifth help item message (55/64)
191 Fifth help item message (56/64)
192 Fifth help item message (57/64)
193 Fifth help item message (58/64)
194 Fifth help item message (59/64)
195 Fifth help item message (60/64)
196 Fifth help item message (61/64)
197 Fifth help item message (62/64)
198 Fifth help item message (63/64)
199 Fifth help item message (64/64)
10)HOURLY Z REPORT
19 <CASH>KEY @ Z MODE
11)MONTHLY X REPORT
20 <CASH>KEY @ X MODE
12)MONTHLY Z REPORT
20 <CASH>KEY @ Z MODE
226
Appendix (File record format)
227
Appendix (Compulsory)
TE-2200/2400 Dealer's Manual
Appendix: Compulsory
This section explains the priority compulsions and the methods to solve them.
Compulsions at the first item registration
Compulsion during item registration
Compulsions during finalizing
Compulsions after finalization
Released by
Priority Error code Meaning <OPEN2> Action
1E047 Force to slip batch print manually. ✔Insert paper to slip and press <SLIP>.
2E040 Force to issue guest receipt. ✔Issue guest receipt.
3E041 Force to print validation. ✔Insert paper and press <VALID>.
4E044 Force to print check. ✔Insert check to slip and press <CHK PRT>.
5E045 Force to print check endorsement. ✔Insert check to slip and press <CHK ENDS>.
Released by
Priority Error code Meaning <OPEN2> Action
1E030 Force to register <RATE TAX>. ✔Register <RATE TAX>.
2E075 Disable to finalize while the ST ✔Register items until the ST amount becomes positive.
amount is negative or equal to zero.
3E059 Force to register <EAT-IN> or ✔Register <EAT-IN> or <TAKEOUT>.
<TAKEOUT>.
4E032 Force to register <FSST>. Press <FSST>.
5E031 Force to register <ST>. Press <ST>.
6E033 Force to enter tendered amount. Enter tendered amount.
7E047 Force to print slip auto batch printing ✔Insert paper to slip printer.
Released by
Priority Error code Meaning <OPEN2> Action
1E026 Force to register condiment/preparation ✔Register condiment/preparation item.
item.
2E041 Force to validate. ✔Perform validation.
Released by
Priority Error code Meaning <OPEN2> Action
1E017 Force to enter check number. ✔Register check number by <NEWCHK>,
<OLDCHK>, <SEPCHK>.
2E018 Force to enter table number. ✔Register table number.
3 E019 Force to enter the number of ✔Register the number of customer.
customer.
228
Appendix (Compulsory)
229
Appendix (Error code)
TE-2200/2400 Dealer's Manual
Appendix: Error code
E001
E003
E004
E005
E008
E009
E010
E011
E016
E017
E018
E019
E021
E023
E024
E026
E029
E030
E031
E032
E033
E035
E036
E037
E038
E040
E041
E042
E044
E045
E046
E047
E048
Mode switch position changed before finalization.
Clerk button pressed before finalization of a registra-
tion being performed under another clerk button.
The signed on clerk differs from the clerk performed
the tracking check registration.
Initialization or unit lock clear operation in progress.
Memory allocation exceeds total memory capacity.
Registration without entering a clerk number.
Operation without entering the password.
The drawer is left open longer than the program time
(drawer open alarm).
Attempt to register while the cash drawer is open.
Two consecutive transactions attempted in the refund
mode.
Attempt made to register an item without inputting a
check number.
Attempt made to register an item without inputting a
table number.
Finalize operation attempted without entering the
number of customer.
No department linked PLU is registered.
Actual stock quantity becomes less than the minimum
stock quantity.
Actual stock quantity becomes/is negative.
No condiment/preparation PLU is registered.
Item registration is prohibited, while partial tender.
Finalization of a transaction attempted without
registering rate-tax.
Finalization of a transaction attempted without
confirming the subtotal.
Finalization of a transaction attempted without
confirming of the food stamp subtotal.
Finalize operation attempted without entering amount
tender.
Change amount exceeds preset limit.
Contents of the drawer exceed programmed limit.
High amount lock out/low digit lock out error
Read/reset operation without declaring cash in drawer.
This error appears only when this function is activated.
Attempt to register a new transaction without issuing a
guest receipt.
Attempt to register a new transaction without validation.
Validation paper (slip printer) has run out.
Attempt to register a new transaction without printing check.
Attempt to register a new transaction without printing
check endorsement.
Registration buffer full.
Separate check buffer full.
Attempt to register a new transaction without printing slip.
No paper is inserted or paper is out in the slip printer.
Error
code Message Meaning Action
Return the mode switch to its original setting and
finalize the operation.
Press the original clerk button and finalize the
transaction before pressing another clerk button.
Input correct check number or assign the proper clerk
number.
Complete operation.
Reallocate memory or expand memory (if possible).
Enter a clerk number.
Enter password.
Close the drawer.
Shut the cash drawer.
Switch to another mode and then back to the RF mode
for the next transaction.
Input a check number.
Input a table number.
Enter the number of customer.
Correct the program.
Perform stock maintenance.
Perform stock maintenance.
Register condiment/preparation PLU.
Finalize the transaction.
Register <RATE TAX>.
Press <SUBTOTAL>.
Press <FS/ST>.
Enter the amount tendered.
Input amount tendered again.
Perform pick up operation.
Enter correct amount.
Perform money declaration.
Issue a guest receipt.
Perform validation operation.
Insert new validation paper.
Perform check print.
Perform check endorsement.
Finalize the transaction.
Allocate sufficient separate check buffer.
Perform slip printing operation.
Insert new slip paper.
Wrong mode
Wrong operator
Error INIT/FC
Insufficient memory
Please sign on
Enter password
Close the drawer
Close the drawer
Change back to REG
mode
Enter CHK/TBL
number
Enter Table number
Enter number of
customers
No DEPT Link
Stock shortage
No stock
Enter condiment/
preparation PLU
In the tender
operation
Press RATE TAX key
Press ST key
Press FSST key
Enter tendered
amount
Change amount
exceeds limit
Remove money from
the drawer
Digit or amount
limitation over
Perform money
declaration
Issue guest receipt
Print validation
Insert VLD paper
and retry
Print Cheque
Print Check En-
dorsement
REG buffer full
Print bill
Insert slip paper
and retry
230
Appendix (Error code)
Error code (…continued)
Error
code Message Meaning Action
E049
E050
E051
E052
E053
E054
E055
E056
E059
E060
E061
E062
E064
E066
E075
E085
E100
E101
E103
E105
E106
E112
E114
E139
E146
E164
E165
E166
E176
E200
E201
E202
E203
E205
CHECK memory full
DETAIL memory full
CHK/TBL No. is occu-
pied
CHK/TBL No. is busy
CHK/TBL No. is not
opened
Out of CHK/TBL No.
range
In the SEP CHK opera-
tion
CHK range full
Press EAT-IN or TAKE-
OUT key
Printer offline
Printer error
Printer paper end
Print buffer full
Print from the begin-
ning of the transac-
tion
Negative balance
cannot be finalized
Data exist in con-
solidation file
Operate at the master
terminal
PLU maintenance file
full. Press <#2> to
exit
PLU Code is not
exist. Input the PLU
Code
PLU file full
Item exists in the
PLU FILE
Close the journal
platen arm
Close the receipt
platen arm
Negative balance is
not allowed
Arrangement file full
Employee No. is not
Found in the Employee
File
Employee No. is not
Clocking-in.
Employee No. is
Occupied
Time&Attendance file
full
Insert CF card
Illegal Format
File not found
Insufficient memory
File already exist.
Check tracking index memory full.
Check tracking detail memory full.
Attempt to made use <New Check> to open a new
check using a number that is already used for an
existing check in check tracking memory.
Attempt to use the same check number whilst the
specified number is being used in the other terminal.
Attempt made to use <Old Check> reopen a new check
using a number that is not used for an existing check in
check tracking memory.
Check number range over.
Normal registration is prohibited during separate check
operation.
All check number are occupied in range.
Attempt to finalize a transaction without specifying
<EAT-IN> or <TAKE-OUT>.
External printer offline
External printer went down.
External printer paper end
Printing buffer full
Attempt to print the last separated transaction on slip.
Attempt to finalize a transaction when balance is less
than or equal to zero.
Data exists in the consolidation file.
Prohibit master operation.
Scanning PLU direct maintenance/batch maintenance
file becomes full.
PLU code is not existed in the file.
Scanning PLU/not found PLU file full
The designated item has already existed in the scanning
PLU file.
The journal platen arm is opened.
The receipt platen arm is opened.
Attempt to register <–> or <CPN> when the balance
becomes negative.
Arrangement file is full.
Attempt to enter a wrong employee number which is
not set to the employee file.
Attempt to clock out the employee who is not clocked
in.
Attempt to clock in the employee who has clocked in
already.
Time and attendance file becomes full.
No CF card is set.
Illegally formatted CF card
The designated file is not found in the CF card.
Insufficient memory in the CF card.
Can not write, because designated file has already been
in the CF card.
Finalize and close the check number currently used.
Finalize and close the check number currently used.
Finalize and close the check that is currently under the
number that you want to use or use a different check
number.
Use another check number or close the check at that
terminal.
Use the correct check number (if you want to reopen a
check that already exists in check tracking memory) or
use <New Check> to open a new check.
Enter correct number.
Terminate separate check operation.
Recall the stored data.
Press <EAT-IN> or <TAKE-OUT>.
Replace new paper.
Print from the beginning of the transaction
Register item(s) until the balance becomes positive
amount.
Clear the data.
Perform it at master terminal.
Terminate the maintenance.
Enter proper PLU code.
Modify the designated item.
Close the journal platen arm.
Close the receipt platen arm.
Enter proper minus/coupon amount.
Set the arrangement properly.
Enter proper employee number.
Enter proper employee number.
Enter proper employee number.
Delete unused employee number or reallocate the time
and attendance file.
Set CF card.
Format the CF card.
Enter proper file name.
Use a vacant (formatted) CF card.
Check the operation and retry.
231
Appendix (Error code)
TE-2200/2400 Dealer's Manual
System error code
Error
code Meaning
File I/O errors
750 File cannot be created.
751 No designated drive
752 FCB area shortage of flash memory
753 No appropriate record number is designated.
754 No partition exists.
755 No vacant record is remained.
756 Changing is not permitted.
757 The designate file cannot be found.
758 The same file has already existed.
759 The same page has already existed.
760 No vacant record is remained.
762 The contents of internal memory and CF card are different.
763 The contents of scanning PLU file among the master/satellite
terminals are different.
764 Write error
CF card I/O errors
781 CF card device error
783 CF card format error
785 No designated file
788 The file is already existed in the CF card.
Communication errors
2000 Network join error
2001 Inline port open error
2002 Inline synchronize error
2003 Inline command error
2004 Time over
2005 Parameter error
2006 Time out
2007 ID number over error
2008 Packet error
2009 ID
2010 WAK receive error
2011 Packet type error
2012 Sequence error
2013 Packet format error
2014 Time over (5 seconds)
2015 User time out
2016 Other communication error
2017 Not found PLU area error
2018 Online port open error
2019 No response
2020 File not found
2021 File create error
Error
code Meaning
2022 File I/O error
2023 Retry error
2024 Receive SYN error
2025 Receive FIN error
2026 FIN is in sending sequence whole recalling n_write()
2027 Illegal format
2028 Illegal command
2029 Busy with response
2030 Communication abortion
2031 Online receiving hardware error
2032 Inline receiving hardware error
2033 Online receiving overrun
2034 Online sending hardware error
2035 Inline sending hardware error
2036 Token is not detected while sending
2037 Time over while detecting DSR ON
Program data send/receive (auto-program) errors
2100 Command code error
2101 Index format error
2102 Machine ID number error
2103 Maximum record number error
Mail box function errors
2300 Mail box full error
2301 Job number error
Other errors
2900 Break operation
2901 Password error
2902 I/O parameter program error
Logic driver initialize common errors
5000 Parameter error (Illegal information of I/O parameter)
5001 No connection (Illegal information of I/O parameter)
5010 Logical driver COM open error
5011 Logical driver COM double open
5012 Logical driver COM not open
5013 Logical driver COM device error
5014 Logical driver COM remain data error
MODEM errors
5300 MODEM initialize error
5301 MODEM open error
5302 Negotiation error
5303 AT command sending error
5304 Control ER error
5305 Receive status error
232
Appendix (Error code)
233
Index
TE-2200/2400 Dealer's Manual
Index
A
action code 102
activation of batch maintenance 99
add check 31, 79, 115
add-in rate tax 88
add-in tax 186
add-on rate tax 85
add-on tax 185
Arabic font 190
arrangement 25, 31, 69, 90, 115, 204
arrangement table 25, 127, 135
AT command 24, 112, 127, 138
AT command file 208
Australian GST 47, 154
auto sign-off 46
auto-program 141, 144
average sales per customer 186
B
backup system for external printer 181
Baltic font 189
barcode system 175
batch feature programming 52
batch maintenance PLU 25, 99, 176
batch maintenance PLU file 198
batch X/Z 26, 89, 110, 127, 133, 159, 203
best 50 report 164, 166, 171
bill 70
bill bottom message 47
bill copy 31, 115
bill copy message 47
bill top message 47
Bon receipt control 56
bottle link 102
bottle link table 26, 95, 127, 136, 199
bottle return 31, 79, 115
bottom message 47
C
calculation & operation control 36
calculation method 185
cancel 31, 79, 115, 185
cash 31, 57, 115, 125
CF card 11, 12
CF card directory report 146
character code 119
character key table 26
character key table file 205
character keyboard 117
character print 60
character recall 26, 60, 127, 135
character recall file 204
charge 31, 57, 115
check 57, 125
check cashing service fee 186
check detail 25
check endorse message 26
check endorsement 31, 68, 115, 134
check endorsement message 110, 127
check endorsement message file 203
check file 25
check index 25
check number 51, 80
check print 26, 31, 79, 115
check print control 90, 127, 135
check print file 204
check tender 31, 115
check tracking 47, 180
clerk 25, 89, 106, 127, 131, 157, 159
clerk assignment 149, 151
clerk control 81
clerk detail 25, 134, 196
clerk detail link 25, 80, 127, 196
clerk file 25, 196
clerk number 31, 74, 115, 149
clerk program 80
clerk report 167
clock-in 182
clock-in/out 31, 77, 115
clock-out 182
commercial message 47
commission 186
commission rate 82
condiment 47, 57
consecutive number 24, 33
contrast control 13
coupon 31, 62, 115, 125, 185, 186
coupon 2 31, 79, 115
credit 31, 58, 115
cube 31, 76, 115, 185
currency exchange 31, 70, 115, 125
currency exchange control 41
customer 69, 186
customer display 11
customer number 31, 115
Cyrillic font 189
234
Index
D
date order 33
date setting 123
decimal point 31, 115
declaration 31, 38, 79, 115, 160, 161, 167, 186
deleting a file from CF card 146
department
24, 31, 52, 54, 115, 116, 127, 130, 159
department best 50 159
department file 195
department report 165
deposit 31, 63, 115
descriptor 105
diag mode 20
direct maintenance PLU 25, 176
direct maintenance PLU file 198
discount 31, 65, 115, 125, 185, 186
drawer 12, 14, 34, 38, 40, 58, 59, 80, 149, 152
drawer assignment 149
E
eat-in 31, 78, 115, 183
EBT 59
EBT tender 31, 115
editing character 120
employee 25, 111, 127, 136
employee file 200
employee number 92
enter 31, 115
error code 229, 230, 231
error correction 31, 66, 115, 185
error message 26, 112, 127, 139
error message file 209
Euro 48, 149, 152, 184, 187
exempt 72
external printer 12, 14, 181
F
file allocation 23
file reset 159, 173
financial report 160
fixed totalizer 24, 89, 105, 127, 128, 159, 185
fixed totalizer file 193
flag clear 19
flat-PLU 31, 52, 54, 115, 116
font code 187
food stamp shift 31, 79, 115
food stamp subtotal 31, 79, 115
food stamp tender 31, 59, 115
foreign currency in drawer 186
formatting CF card 146
function and total file 24
future order 183
G
general control 26, 127, 132
general control file 201
general control program 33
grand total 25, 106, 127, 132, 186
grand total file 201
graphic image file 208
graphic logo 26, 47
graphic logo file 208
Greek font 188
gross sales 185
group 24, 89, 106, 127, 130, 159
group file 195
group report 166
guest receipt 183
guidance message file 209
H
hardware configuration 11
help message 111
HHS-15 12, 14
high amount limit 55
hourly sales 24, 127, 131, 159
hourly sales file 197
hourly sales report 168
HS1250 14
I
I/O parameter table 24, 96, 127, 138
I/O parameter table file 208
in drawer 155, 160, 161, 167, 186
individual feature programming 54
individual item/key report 160
init 2 19
initialization 17
initialize code 24
initialize code file 207
intermediate message 47
IPL (Initial program loading) 15
IPL via CF card 16
IPL via COM port 15
issuing program reading report 127
item/clerk descriptors by range 116
J
job command table 94
K
key allocation 29
key function/machine feature 33
key table 26
key table file 206
L
link 54
loan 31, 61, 115, 186
235
Index
TE-2200/2400 Dealer's Manual
M
manager control mode 149
manager operation 149
manual tax 31, 66, 115, 185
media change 31, 79, 115
memory map 15
menu 72
menu & price shift 37
menu shift 31, 115
merchandise subtotal 31, 75, 115
message 109
message control 46
minus 31, 62, 115, 125, 185
miscellaneous message 26, 112, 127, 138
miscellaneous message file 213
mix & match
89, 91, 102, 111, 127, 136, 159, 179
mix & match report 172
mix & match table 25
mix & match table file 199
mode control 82
mode switch 11
MODEM 14
money declaration 37, 155, 156
money declaration in the REG1/REG2/RF modes
155
monthly 89
monthly report 168
monthly sales 25, 159
monthly sales file 197
multi drawer 12
multilingual font 187
multiple price 178
multiplication 31, 76, 115, 185
N
net sales 185
new balance 31, 59, 115, 125
new balance fee 186
new check 31, 76, 115
new/old check 31, 76, 115
no sale 31, 79, 115
non add 31, 68, 115
non add/no sale 31, 68, 115
non PLU table 25, 98, 127, 135, 175
non PLU table file 198
not found PLU 177, 178, 179
O
OBR 31, 79, 115, 175
old check 31, 79, 115
one touch NLU 31, 78, 103, 115, 137, 175, 177
one touch NLU table 25, 127
one touch NLU table file 199
online control 40
online password 24, 127, 138
online password file 208
open 31, 115
open check 31, 79, 115, 159
open check report 169
open2 31, 73, 115
operation control 36
operation start date file 207
operator display 11
operator read/reset 31, 115
operator x/z 74
order control 45, 55
P
paid out 31, 61, 115, 186
password 20, 21, 33, 155
peripheral device 14, 191
pick up 31, 61, 115, 186
PLU 24, 31, 52, 54, 79, 115, 116, 127, 129
PLU best 50 159
PLU by group 89, 159
PLU by record number/random code 159
PLU file 194
PLU individual by department 157
PLU individual by group 157
PLU range by random code 158
PLU range by record number 158
PLU report 163
PLU reset 159, 173
PLU stock 89
PLU stock all PLU by record number 159
PLU stock by group 89, 159
PLU stock individual by department 157
PLU stock individual by group 157
PLU stock range by random code 158
PLU stock range by record number 158
PLU stock report 164
plus 31, 62, 115, 125, 185
premium 31, 65, 115, 125, 185
preparation 227
previous balance 31, 64, 115
previous balance subtotal 31, 79, 115
price 31, 79, 115
price change 31, 77, 115, 175
price inquiry 31, 79, 115, 175
price shift 31, 37, 73, 115, 175
print control 44
print control for fixed total report 38, 39
print control for grand total 43
print control for guest receipt and slip 45
print control for receipt 35
print control for report 42
print control for taxable amount 40
printer connection table 24, 127, 137, 181, 207
printer cover 11
printing guidance message 26, 112, 127, 138
printing guidance message file 214
printing history 2
236
Index
program / message / buffer file 26
program 1 programming in X1 mode 149, 154
program guidance message 26, 113, 127, 139
program guidance message file 218
program reading report of program 1 126
program reading report of program 2 121
program reading report of program 3 104
program reading report of program 4 32
program reading report of program 5 27
program sub mode 21
Q
quantity/for 31, 76, 115
Quick Scan 6000 14, 192
R
random code 55
rate 125
rate tax 31, 66, 115, 125
read/reset report 155
recall 31, 79, 115
recall character message 111
receipt 31, 67, 115
receipt message 26, 127, 134
receipt message file 203
receipt on/off 31, 79, 115
received on account 31, 61, 115, 186
red price 31, 79, 115
refund 31, 79, 115
registration buffer 26
registration guidance message 26, 113, 127, 139
registration guidance message file 221
remote printer buffer 26
report (batch) 159
report (individual file) 158
report (individual item/key) 156
report (range) 157
report code 89
report header 26, 110, 127, 133
report header file 202
return 185
review 31, 74, 115
revised point 2
RF mode 186
Robotics 14
rounding 34, 186
S
sales ratio 156
scanner 12, 14
scanning 49
scanning PLU 25, 127, 131, 159, 175
scanning PLU best 50 by range department 158
scanning PLU by range department 158
scanning PLU by range group 158
scanning PLU direct maintenance 100, 125
scanning PLU file 25, 198
scanning PLU inactive item by range department
158
scanning PLU index 25
scanning PLU maintenance 99
scanning PLU report 170
scanning PLU reset 159, 173
scanning system setup 175
scheduler 26, 93, 127, 136
scheduler file 204
secret number 80
separate check 31, 79, 115
separate check buffer 25
set menu 55
set menu table 26, 127, 133
set menu table file 202
set the AT command to default value 147
set the AT command to MODEM 147
Singapore tax 88
single item 185
Slavic font 188
slip 71
slip back feed/release 31, 115
slip backfeed/release 79
slip feed/release 31, 79, 115
slip print 31, 115, 183
slip print buffer 26
slip printer 12, 14
slip/external printer message 26, 111, 127, 135
slip/external printer message file 203
slit drawer 37
SP-1300 12, 14, 191
special character 26, 107, 127, 132
special character file 202
split price 185
square 31, 76, 115, 185
standard font 187
start date 24
stock 55, 102
stock inquiry 31, 79, 115
stock quantity maintenance 149, 150
store 31, 79, 115
store/recall/auto new check number 50, 51
stroke keyboard 11
subtotal 31, 75, 115
system configuration 11
system error log 24
system error log file 208
system error log report 145
system file 24
system utilities 141
237
Index
TE-2200/2400 Dealer's Manual
T
table analysis 25, 89, 106, 127, 132, 159
table analysis file 200
table analysis report 169
table number 31, 79, 115
table number range 82
table range 83
takeout 31, 78, 115, 183
tax exempt 31, 115
tax shift 31, 71, 115
tax system 34
tax table 26, 84, 127, 133
tax table file 202
taxable amount subtotal 31, 115
taxable status 53, 62, 64, 65, 91, 103
taxable subtotal 71
terminal connection table 24, 112, 127, 137
text print 31, 115
text recall 31, 115
three zero 31, 115
till timer 40
time & attendance 159
time & attendance report 173
time and attendance 25, 182
time and attendance file 25, 200
time setting 123
time zone 83, 89
tip 31, 60, 115
touch keyboard 11
transaction key 24, 89, 115, 127, 128, 159, 194
transaction key program 57
transaction key report 162
tray total 31, 75, 115
two zero 31, 115
U
U.S. tax table with rate setting 87
U.S. tax table without rate setting 86
unit price 123
unit price and unit quantity (1st) 123
UP-360 12, 191
V
validation 31, 79, 115
VAT 31, 79, 115
void 31, 67, 115, 185
W
watermark 47
watermark print 26
watermark print file 208
X
X/Z guidance message 26, 113, 127, 139
X/Z guidance message file 216
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
IR0508-000501A TE22_24DM*E
Printed in Japan
