Casio G Shock G100 1Bv Wrist Watch G1001Bv Users Manual QW 2327
Casio G-Shock G100-1bv Wrist Watch G1001BV 634354_manual
G1001BV to the manual 36d4eeea-5977-422b-9a43-887be0a3cdfe
2015-01-21
: Casio Casio-Casio-G-Shock-G100-1Bv-Wrist-Watch-G1001Bv-Users-Manual-243940 casio-casio-g-shock-g100-1bv-wrist-watch-g1001bv-users-manual-243940 casio pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
USER’S GUIDE 2327 General Guide • Press C to change from mode to mode. • In any mode (except when making any settings), press L to illuminate the digital display for about two seconds. Alarm Mode Stopwatch Mode Dual Time Mode Timekeeping Mode Calendar Mode Alarm Mode Calendar Mode To set the date Hold down B. Press B. Year Hold down B. Hour Month Press B. Day Press B. Month Press B. Minutes Day of week Press B. Hour Minutes Day 1. In the Calendar Mode, hold down B for about two seconds, until “ADJ” and then the year digits flash on the display. Keep B depressed until the year digits flash. 2. While any setting is selected (flashing), press C to increase it. Holding down C changes the flashing setting at high speed. 3. Press B to move the selection around the display in the above sequence. • The day of the week is automatically set in accordance with the date. • The date can be set with the range of January 1,1995 to December 31, 2039. • If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Calendar Mode automatically. Timekeeping Mode The minutes hand advances 1/3 of a minute each time the seconds count in the digital display reaches 00, 20 and 40 seconds. To set the digital time Hold down B. Press B. Seconds Mode indicator When an alarm is turned on, an alarm tone sounds for 20 seconds at the preset time each day. To set the alarm time 1. In the Alarm Mode, hold down B for about two seconds, until “ADJ” and then the hour digits flash on the display. Keep B depressed until the hour digits flash. 2. Press C to increase the setting. Holding down C changes the current setting at high speed. 3. Press B to change the selection in the above sequence. • The format (12-hour and 24-hour) of the alarm time matches the format you select for normal timekeeping. • When setting the alarm time using the 12-hour format, take care to set the time correctly as morning or afternoon. • If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Alarm Mode automatically. • The alarm is turned on automatically whenever you change the alarm time setting. To stop the alarm Hour Press any button to stop the alarm after it starts to sound. Press B. To switch the daily alarm on and off In the Alarm Mode, press B to turn the daily alarm on and off. 12/24 Press B. Hour Minutes ON OFF Press B. Press B. Seconds PM indicator Minutes 1. In the Timekeeping Mode, hold down B for about two seconds, until “ADJ” and then the seconds digits flash on the display. Keep B depressed until the seconds digits flash. 2. While the seconds digits are selected (flashing), press C to reset the seconds to 00. If you press C while the seconds count is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of 00 to 29, the minutes count is unchanged. 3. Press B to move the selection around the display in the above sequence. 4. While hour or minutes are selected (flashing), press C to increase the setting. Holding down C changes the current setting at high speed. While the 12/24-hour setting is selected, press C to switch between the two formats. • If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Timekeeping Mode automatically. To test the alarm Hold down C while in the any mode to sound the alarm. Stopwatch Mode The Stopwatch Mode lets you measure elapsed time. The range of the stopwatch is 23 hours, 59 minutes 59 seconds. The measuring unit for the first hour of elapsed time measurement is 1/100-second. After that the unit is one second. You can use the EL backlight at any time while the stopwatch is operating by pressing L. 1. Press B to start the stopwatch. 2. Press B again to stop the stopwatch. • You can repeat steps 1 and 2 as many times as you want. 3. To reset the stopwatch time to all zeros, hold down B. Hand setting Each press of A advances the hands 20 seconds. Holding down A advances the hands at high speed. • Note that the hands can be advanced only and cannot be moved back. Take care so you do not go past the setting you want to make. After the first hour Minutes About the Backlight In any mode (except when making any settings), press L to illuminate the digital display for about two seconds. • The backlight of the watch employs an electro-luminescent (EL) light, which loses illuminating power after very long use. • The illumination provided by the backlight may be hard to see when viewed under direct sunlight. • The watch will emit an audible sound whenever the display is illuminated. It does not indicate malfunction of the watch. • The backlight automatically stops illuminating whenever an alarm sounds. • Frequent use of the backlight shortens battery life. 1/100 seconds Seconds Mode indicator Hour Seconds Minutes 1 USER’S GUIDE 2327 Dual Time Mode The Dual Time Mode lets you keep track of the time in another time zone. To set the Dual Time Hold down B. Hour Seconds Press B. Minutes Press B. Hour Mode indicator Minutes 1. In the Dual Time Mode, hold down B for about two seconds, until “ADJ” and then the hour digits flash on the display. Keep B depressed until the hour digits flash. 2. Press C to increase the setting. Holding down C changes the current setting at high speed. 3. Press B to move the selection around the display in the above sequence. • The format (12-hour and 24-hour) of the Dual Time matches the format you select for normal timekeeping. • The seconds count is synchronized with the seconds count in the Timekeeping Mode. • If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Dual Time Mode automatically. 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2002:04:26 09:55:39Z Modify Date : 2002:04:26 19:02:49+09:00 Subject : Keywords : PDF, Manual Page Count : 2 Creation Date : 2002:04:26 09:55:39Z Mod Date : 2002:04:26 19:02:49+09:00 Producer : Acrobat Distiller 5.00 for Macintosh Author : CASIO COMPUTER CO., LTD Metadata Date : 2002:04:26 19:02:49+09:00 Creator : CASIO COMPUTER CO., LTD Title : QW-2327 Description : Page Mode : UseOutlines Page Layout : OneColumnEXIF Metadata provided by EXIF.tools