Casio Ctk 5200 Owners Manual CTK5200_EN

Web_CTK5200-ES-1B Web_CTK5200-ES-1B_EN CTK-5200 | Electronic Musical Instruments | Manuals | CASIO

: Casio Casio-Ctk-5200-Owners-Manual-590481 casio-ctk-5200-owners-manual-590481 casio pdf

Open the PDF directly: View PDF .
Page Count: 82

EN/ES

CTK5200-ES-1B

CTK-5200

USER’S GUIDE

Please keep all information for future reference.

Safety Precautions

Before trying to use the Digital Keyboard, be sure to

read the separate “Safety Precautions”.

GUÍA DEL USUARIO

Guarde toda la información para futuras consultas.

Precauciones de seguridad

Antes de intentar usar el teclado digital, asegúrese de

leer las “Precauciones de seguridad” separadas.

EnglishEspañol

MA1408-B Printed in China

K

CTK5200_A5_x1a_EN_ES.indd 1 2014/07/24 12:13:10

B

Function Transmitted Recognized Remarks

Basic

Channel

1

1 - 16

1 - 16

1 - 16

Default

Changed

Note

Number

0 - 127

0 - 127 *1

12 - 120

True voice

Program

Change

O

0 - 127

O

0 - 127

:True #

After

Touch

Control

Change

X

X

O

X

O

Pitch Bender

O

System Exclusive

O

*2

O

Key’s

Ch’s

Velocity

O

9nH v = 1 - 127

X

9nH v = 0, 8nH v =**

O

9nH v = 1 - 127

X

9nH v = 0

Note ON

Note OFF

Mode

Mode 3

X

Mode 3

X

Default

Messages

Altered

System

Common

X

X

X

X

X

X

: Song Pos

: Song Sel

: Tune

Aux

Messages

Remarks

X

O

X

O

X

X

O

O

X

O

O

X

: All sound off

:

Reset all controller

: Local ON/OFF

: All notes OFF

: Active Sense

: Reset

System

Real Time

O

O

X

X

: Clock

: Commands

0, 32

1

6, 38

7

10

11

64

66

67

91

93

100, 101

Bank select

Modulation

Data entry

Volume

Pan

Expression

Hold 1

Sostenuto

Soft pedal

Reverb send

Chorus send

RPN LSB, MSB

Model: CTK-5200 Version : 1.0

Mode 1 : OMNI ON, POLY

Mode 3 : OMNI OFF, POLY

Mode 2 : OMNI ON, MONO

Mode 4 : OMNI OFF, MONO

O : Yes

X : No

O

X

O

O

O

X

O

O

O

X

O

O

*2

*3

*3

*3

*2

O

O

O

O

O

O

O

O

O

O

O

O

(MSB only)

*2

*2

*2

*1: Depends on tone.

*2: For details about NRPN, RPN, and system

exclusive messages, see MIDI Implementation at

http://world.casio.com/.

*3: In accordance with pedal effect setting.

*1: Depende del tono.

*2: Para obtener información acerca de NRPN, RPN y

los mensajes exclusivos del sistema, consulte

Implementación MIDI en http://world.casio.com/.

*3: De acuerdo con el ajuste de efecto de pedal.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

Declaration of Conformity

Model Number: CTK-5200

Trade Name: CASIO COMPUTER CO., LTD.

Responsible party: CASIO AMERICA, INC.

Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

CTK5200_A5_x1a_EN_ES.indd 2 2014/07/24 12:13:10

Important!

Please note the following important information before using this product.

• Before using the optional AC Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check

the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is

seriously damaged.

• Never attempt to recharge batteries.

• Do not use rechargeable batteries.

• Never mix old batteries with new ones.

• Use recommended batteries or equivalent types.

• Always make sure that positive (+) and negative (–) poles are facing correctly as indicated near the battery compartment.

• Replace batteries as soon as possible after any sign they are getting weak.

• Do not short-circuit the battery terminals.

• The product is not intended for children under 3 years.

• Use only a CASIO AD-E95100L adaptor.

• The AC adaptor is not a toy.

• Be sure to disconnect the AC adaptor before cleaning the product.

This mark applies in EU countries only.

●Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal

use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.

●IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,

DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE

USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

●The contents of this manual are subject to change without notice.

●The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide.

●Company and product names used in this manual may be registered trademarks of others.

Manufacturer:

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Responsible within the European Union:

CASIO EUROPE GmbH

Casio-Platz 1, 22848 Norderstedt, Germany

Declaration of Conformity According to EU Directive

E-1

CTK5200_A5_x1a_EN_ES.indd 3 2014/07/24 12:13:10

E-2

Contents

General Guide ..................................E-4

Using the 10-key Pad (br).................................E-7

FUNCTION Button (ct) Functions ....................E-7

Returning the Digital Keyboard to

Its Factory Default Settings ................................E-8

Getting Ready to Play......................E-9

Preparing the Music Stand .................................E-9

Power Supply .....................................................E-9

Playing the Digital Keyboard ........E-10

Turning on Power and Playing .........................E-10

Using Headphones...........................................E-11

Changing Keyboard Response to

Touch Pressure (Touch Response)..................E-11

Adjusting Display Contrast ...............................E-12

Using the Metronome .......................................E-12

Controlling the

Keyboard Sounds ..........................E-14

Select from a variety of

musical instrument sounds...............................E-14

Layering Two Tones.........................................E-15

Splitting the Keyboard between

Two Different Tones .........................................E-15

Using Reverb....................................................E-16

Using Chorus....................................................E-16

Using a Pedal ...................................................E-17

Changing the Pitch

(Transpose, Tuning, Octave Shift)....................E-17

Using the Pitch Bend Wheel to

Shift the Pitch of Notes.....................................E-18

Sampling Sounds and Playing

Them on the Digital Keyboard ...... E-19

Connection and Preparation.............................E-19

Sampling and Playing a Melody Sound

(Melody Sampling) ...........................................E-19

Incorporating a Sampled Sound into

a Drum Set (Drum Sampling) ...........................E-22

Other Sampling Functions................................E-24

Playing Built-in Songs...................E-27

Playing the Demo Songs..................................E-27

Playing Back a Particular Song ........................E-28

Increasing the Selection of Songs....................E-30

Using Built-in Songs to Master

Keyboard Play................................ E-31

Phrases............................................................ E-31

Step Up Lesson Flow....................................... E-31

Selecting the Song, Phrase,

and Part You Want to Practice......................... E-32

Lessons 1, 2, and 3.......................................... E-33

Lesson Settings ............................................... E-34

Using Auto Step Up Lesson............................. E-36

Music Challenge

Keyboard Game ............................. E-37

Using Auto Accompaniment......... E-38

Playing the Rhythm Part Only.......................... E-38

Playing All Parts............................................... E-39

Using Auto Accompaniment Effectively ........... E-41

Using One-Touch Preset ................................. E-42

Using Auto Harmonize ..................................... E-43

Looking Up the Notes of Chords

(Chord Book).................................................... E-44

Editing Auto Accompaniment

Patterns .......................................... E-45

Saving Keyboard Setups to

Registration Memory..................... E-48

To save a setup to registration memory........... E-49

To recall a setup from registration memory ..... E-49

Recording Your Keyboard Play.... E-50

Recording and Playing Back

Keyboard Play.................................................. E-50

Using Tracks to Record and Mix Parts ............ E-51

Recording Two or More Songs,

and Selecting One for Playback....................... E-53

Recording while Playing Along with

a Built-in Song.................................................. E-53

Saving Recorded Data on

an External Device........................................... E-54

CTK5200_A5_x1a_EN_ES.indd 4 2014/07/24 12:13:10

English

Contents

E-3

Other Useful Digital Keyboard

Functions........................................E-55

Changing the Scale of the Keyboard................E-55

Using Music Preset ..........................................E-56

Using the Arpeggiator.......................................E-57

Deleting User Song Data..................................E-58

Deleting All Data in Digital Keyboard

Memory ............................................................E-58

Using a Memory Card ....................E-59

Memory Card and Card Slot Precautions.........E-59

Inserting and Removing a Memory Card..........E-60

Formatting a Memory Card...............................E-60

Saving Digital Keyboard Data to

a Memory Card.................................................E-61

Loading Data from a Memory Card into

Digital Keyboard Memory .................................E-62

Deleting Data from a Memory Card..................E-63

Playing Back Data from a Memory Card ..........E-64

Memory Card Error Messages .........................E-64

Connecting External Devices .......E-65

Connecting a Computer ...................................E-65

MIDI Settings....................................................E-66

Storing and Loading Digital Keyboard

Memory Data....................................................E-68

Connecting to Audio Equipment.......................E-69

Reference........................................E-70

Troubleshooting................................................E-70

Specifications ...................................................E-72

Operating Precautions......................................E-73

Error Messages ................................................E-74

Song List ..........................................................E-75

Fingering Guide................................................E-76

Button Number Reference

MIDI Implementation Chart

Included Accessories

●Music Stand

●Song Book

●Leaflets

• Safety Precautions

• Appendix

• Other (Warranty, etc.)

Items included as accessories are subject to change without notice.

Separately Available Accessories

• You can get information about accessories that

are separately for this product from the CASIO

catalog available from your retailer, and from the

CASIO website at the following URL.

http://world.casio.com/

CTK5200_A5_x1a_EN_ES.indd 5 2014/07/24 12:13:10

E-4

General Guide

• In this manual, the term “Digital Keyboard” refers to the CTK-5200.

• In this manual, buttons and other controllers are identified using the numbers shown below.

• There is the “Button Number Reference” at the back of this manual. You can tear it out and refer to the button numbers as

required.

5511 22

brbr

bnbn

66 77 88 99 bkbk

bsbs btbt ckck clcl cmcm

blbl

4433

bpbpbqbq bobo

ctctcscscncn coco cpcp cqcq crcr

bmbm

dk dmdl dn do dp dk

dr dsdq

B

CTK5200_A5_x1a_EN_ES.indd 6 2014/07/24 12:13:11

English

General Guide

E-5

• The following explains the meaning of the $ symbol that appears on the product console and with the key names below.

$: Indicates a function that is enabled by holding down the button for some time.

1P (POWER) button ☞E-10

2VOLUME knob ☞E-10

3RECORDER button ☞E-50

4RHYTHM EDITOR button ☞E-45

5METRONOME, $ BEAT button ☞E-12

6INTRO, REPEAT button ☞E-29, 41

7NORMAL/FILL-IN, REW button ☞E-28, 41

8VAR./FILL-IN, FF button ☞E-28, 41

9SYNCHRO/ENDING, PAUSE button ☞E-28, 41

bk START/STOP, PLAY/STOP button ☞E-27, 38

bl $ CHORDS, ACCOMP, PART SELECT button

☞E-30, 39

bm TEMPO buttons ☞E-13

bn TONE, $ MUSIC PRESET button ☞E-14, 56

bo RHYTHM, $ ONE TOUCH PRESET button

☞E-38, 42

bp SONG BANK button ☞E-28

bq CARD, $ LOAD/SAVE button ☞E-59

br Number buttons, [–]/[+] keys ☞E-7

bs BANK, LISTEN button ☞E-33, 48

bt Area1, WATCH button ☞E-33, 48

ck Area2, REMEMBER button ☞E-34, 48

cl Area3, NEXT button ☞E-32, 48

cm Area4, AUTO button ☞E-36, 48

cn STORE, MUSIC CHALLENGE button ☞E-37, 49

co SPLIT button ☞E-15

cp LAYER button ☞E-15

cq AUTO HARMONIZE/ARPEGGIATOR,

$ TYPE button ☞E-43, 57

cr PIANO/ORGAN button ☞E-14

cs CHORD BOOK button ☞E-44

ct FUNCTION button ☞E-7

dk Speakers

dl Song Bank list

dm Display

dn Music Preset list

do Rhythm list

dp Tone list

dq PITCH BEND wheel ☞E-18

dr CHORD root names ☞E-39

ds Percussion instrument list ☞E-14

CTK5200_A5_x1a_EN_ES.indd 7 2014/07/24 12:13:11

General Guide

E-6

dt SD CARD SLOT ☞E-59

ek USB port ☞E-65

el SUSTAIN/ASSIGNABLE JACK ☞E-17

em AUDIO IN jack ☞E-19

en DC 9.5V terminal ☞E-9

eo PHONES/OUTPUT jack ☞E-11, 69

ekdt el em eoen

■Back

CTK5200_A5_x1a_EN_ES.indd 8 2014/07/24 12:13:11

English

General Guide

E-7

Use the number buttons and the [–] and [+] keys to change

the settings of the parameters that appear in the upper left

area of the display.

Use the number buttons to enter numbers and values.

• Enter the same number of digits as the currently displayed

value.

• Negative values cannot be input using the number buttons.

Use [–] (decrease) and [+] (increase) instead.

You can use the [–] (decrease) and [+] (increase) keys to

change the displayed number or value.

• Holding down either key scrolls the displayed setting.

• Pressing both keys at the same time will revert to the initial

default setting or the recommended setting.

You can use the FUNCTION button (ct) to adjust the reverb

effect, to delete data, and to perform a wide range of other

Digital Keyboard operations.

1.

Press ct (FUNCTION) to display the function

menu.

2.

Use the br (10-key) [4] (o) and [6] (p) keys

to display the function you want.

• You can exit the function menu by pressing ct

(FUNCTION).

• After selecting functions 8 through 13, press the br

(10-key) [9] (ENTER) key to display the menu item’s

submenu. Then use [4] (o) and [6] (p) to select an

item. You can exit a submenu by pressing the br

(10-key) [7] (EXIT) key.

3.

Refer to the indicated pages for details about

each function.

Using the 10-key Pad (br)

Number Buttons

Example: To enter tone number 001, input 0 3 0 3 1.

[–] and [+] Keys

Setting

St .GrPno

FUNCTION Button (ct) Functions

To select a function

CTK5200_A5_x1a_EN_ES.indd 9 2014/07/24 12:13:11

General Guide

E-8

• The tone and other parameters revert to their initial

defaults whenever you turn on power (page E-10).

Perform the following procedure when you want to return the

Digital Keyboard’s stored data and settings to their initial

factory defaults.

1.

Turn off the Digital Keyboard.

2.

While holding down bp (SONG BANK) and the

[1] 10-key (br) key at the same time, press 1.

• Keep bp (SONG BANK) and the [1] 10-key (br) key

depressed until the next step is complete.

3.

When the message “Pls wait” appears on the

screen, release bp (SONG BANK) and the [1]

10-key (br) key.

• You will be able to use the Digital Keyboard in a short

while after its system is initialized.

• See “Turning on Power and Playing” (page E-10) for

information about turning digital power on and off.

Function Display See

Page

1 Transpose Trans. E-17

2 Accompaniment Volume AcompVol E-42

3 Song Volume Song Vol E-30

4 Touch Response Touch E-11

5 Tuning Tune E-17

6 Reverb Reverb E-16

7 Chorus Chorus E-16

8 Sampling SAMPLING

Automatic Sampling Start AutoStrt E-24

Automatic Sampling Stop AutoStop E-25

Sampled Tone Protect (Protect) E-26

9 Step Up Lesson LESSON

Voice Fingering Guide Speak E-34

Note Guide NoteGuid E-35

Performance Evaluation Scoring E-35

Phrase Length PhraseLn E-35

10 Preset Scales SCALE E-55

11 Other Settings OTHER

Arpeggiator Hold ArpegHld E-57

Pedal Effect Jack E-17

Pitch Bend Range Bend Rng E-18

Accompaniment Scale AcompScl E-56

LCD Contrast Contrast E-12

12 MIDI Settings MIDI

Keyboard Channel Keybd Ch E-66

Navigate Channels Navi. Ch E-66

Local Control Local E-67

Accomp Out AcompOut E-67

13 Delete DELETE

Sampled Sound Delete (tone name) E-25

User Rhythm Delete (rhythm name) E-47

User Song Delete (song name) E-58

All Data Delete All Data E-58

Returning the Digital Keyboard to

Its Factory Default Settings

CTK5200_A5_x1a_EN_ES.indd 10 2014/07/24 12:13:11

English

E-9

Getting Ready to Play

Either an AC adaptor or batteries can be used to power this

Digital Keyboard. Normally, use of AC adaptor power is

recommended.

Make sure that you use only the AC adaptor specified for this

Digital Keyboard. Use of a different type of AC adaptor can

cause malfunction.

• Be sure to turn off Digital Keyboard power before

connecting or disconnecting the AC adaptor.

• The AC adaptor will become warm to the touch after

very long use. This is normal and does not indicate

malfunction.

• To prevent breaking of the wire, take care to avoid

putting any type of load on the power cord.

• Never insert metal, pencils, or any other objects into

the product’s 9.5V DC terminal. Doing so creates the

risk of accident.

• Be sure to turn off power before loading batteries.

• It is up to you to prepare six commercially available

batteries. Do not use oxyride batteries or any other

nickel based batteries.

1.

Open the battery cover on the bottom of the

Digital Keyboard.

2.

Load six AA-size batteries into the battery

compartment.

Make sure the positive + and negative - ends of the

batteries are facing as shown in the illustration.

3.

Insert the tabs of the battery cover into the

holes on the side of the battery compartment,

and close the cover.

■Low Battery Indication

The indicator shown below starts to flash to let you know

when battery power is low. Replace the batteries with new

ones.

Preparing the Music Stand

Power Supply

Using the AC Adaptor

Specified AC Adaptor: AD-E95100L

(JEITA Standard plug)

No bending! No winding!

Music stand

Household power outlet

AC adaptor

• Configuration and type depend on

your geographic location.

DC 9.5V

Using Batteries

Tabs

Low battery indicator

(flashes)

CTK5200_A5_x1a_EN_ES.indd 11 2014/07/24 12:13:11

E-10

Playing the Digital Keyboard

1.

Press 1 to turn on Digital Keyboard power.

2.

Try playing something on the keyboard. Use 2

to adjust volume.

3.

To turn off the Digital Keyboard, press 1

again.

• If you press 1 only lightly, the display will light up

momentarily but power will not turn on. This does not

indicate malfunction. Press 1 firmly and completely

to turn on power.

• Turning off the Digital Keyboard causes most current

settings to be cleared. The Digital Keyboard will revert

to initial settings the next time you turn it on.

This is true for all settings except for sample sound

protection. Once you turn it on it remains on until you

turn it off again.

• The message “Pls wait” will remain on the display

while a data save operation is in progress. Do not

perform any other operation while it is displayed.

Turning off the Digital Keyboard or removing the

memory card can cause Digital Keyboard data to be

deleted or become corrupted.

• Pressing 1 to turn off power actually puts the Digital

Keyboard into a standby state. Minute amounts of

current continue to flow within the Digital Keyboard in

the standby state. If you do not plan to use the Digital

Keyboard for a long time or if there is a lightning storm

in your area, be sure to unplug the AC adaptor from the

power outlet.

2211 55 brbr

bnbn

bmbm ctct

Turning on Power and Playing

CTK5200_A5_x1a_EN_ES.indd 12 2014/07/24 12:13:12

English

Playing the Digital Keyboard

E-11

If you do not perform any operation on the Digital Keyboard

for one of the trigger times noted below, Auto Power Off will

turn off power.

■Disabling Auto Power Off

You can disable Auto Power Off to ensure that power is not

turned off automatically during a concert, etc.

1.

While holding down bn (TONE), turn on power.

Auto Power Off will be disabled.

Using headphones cuts off output from the built-in speakers,

which means you can practice playing even late at night

without disturbing others.

• Be sure to turn down the volume level before connecting

headphones.

• Headphones do not come with the Digital Keyboard.

• Use commercially available headphones. See page E-3 for

information about options.

• Do not listen to very high volume output over

headphones for long period. Doing so creates the risk

of hearing damage.

• If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor plugged

in when removing the headphones.

Touch Response alters tone volume in accordance with

keyboard pressure (speed). This provides you some of the

same expressivity you get on an acoustic piano.

Use the procedure below to control how much the volume of

played notes change in accordance with playing speed.

Select the setting that best matches your playing style.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“Touch” (page E-7).

2.

Use br (10-key) [–] and [+] keys to select one of

the three Touch Response sensitivity settings.

Auto Power Off

During battery operation : 6 minutes

During AC adaptor operation: 30 minutes

Using Headphones

PHONES/OUTPUT jack

Changing Keyboard Response to

Touch Pressure

(Touch Response)

Pressing fast produces

louder notes.

Pressing slowly produces

softer notes.

Do not try to use too much

pressure.

Changing Touch Response Sensitivity

Off (oFF) Touch Response is turned off. Sound

volume is fixed, regardless of key press

speed.

Type 1 (1) Normal Touch Response

Type 2 (2) More sensitive Touch Response than Type 1

Touch

CTK5200_A5_x1a_EN_ES.indd 13 2014/07/24 12:13:12

Playing the Digital Keyboard

E-12

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“OTHER” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “Contrast”.

4.

Use the br (10-key) [–] and [+] keys to adjust

the contrast.

• The contrast setting range is 01 to 17.

The metronome lets you play and practice along with a steady

beat to help keep you on tempo.

1.

Press 5.

This starts the metronome.

2.

Press 5 again to stop the metronome.

You can configure the metronome to use a bell sound for the

first beat of each measure of the song you are playing.

• You can specify 0, or a value from 2 to 6 as the number of

beat per measure.

• When playing a built-in song, the beats per measure setting

(which determines when the bell sounds) is configured

automatically for the currently selected song.

1.

Hold down 5 until the beats per measure

setting screen appears on the display.

• If you do not perform any operation for a few seconds

after the beats per measure setting screen appears, the

display will return to the screen displayed before you

pressed 5.

2.

Use br (10-key) to enter the number of beats

per measure.

• The bell will not sound if you specify 0 for this setting. In

this case, all beats are indicated by a click sound. This

setting lets you practice with a steady beat, without

worrying how many beats there are in each measure.

Adjusting Display Contrast

Flashes

OTHER

Con t r as t

Using the Metronome

Start/Stop

Changing the Beats Per Measure

This pattern changes with each beat.

Bea t

CTK5200_A5_x1a_EN_ES.indd 14 2014/07/24 12:13:12

English

Playing the Digital Keyboard

E-13

Use the following procedure to change the tempo of the

metronome.

1.

Press bm.

Use y (slower) and t (faster) to change the tempo

setting. Holding down either button changes the setting at

high speed.

• Pressing t and y at the same time will initialize the

tempo setting in accordance with the currently selected

song or rhythm.

• Pressing bm causes the tempo value to flash on the

display. While the tempo value is flashing, you can use

br (10-key) to change it.

Note that you must input leading zeros, so 89 is input

as 089.

• The tempo value will stop flashing if you do not perform

any operation for a short while.

The metronome volume setting is changed automatically with

the volume level of the currently selected Auto

Accompaniment or song. The metronome volume cannot be

adjusted independently.

• For information about changing the Auto Accompaniment

volume, see page E-42.

• For information about changing the song volume, see page

E-30.

• You cannot adjust the balance between the metronome

and note volume during Auto Accompaniment and built-in

tune play.

Changing the Metronome Tempo

Changing the Metronome Sound Volume

Tempo value (flashes)

CTK5200_A5_x1a_EN_ES.indd 15 2014/07/24 12:13:12

E-14

Controlling the Keyboard Sounds

Your Digital Keyboard lets you select tones for a wide variety

of musical instrument sounds, including violin, flute, orchestra,

and more. Even the same song sound takes on a different feel

by changing the instrument type.

1.

Press bn (TONE).

2.

Use br (10-key) to select the tone number you

want.

The corresponding tone number and tone name will

appear on the screen.

• Use the number buttons to enter the tone number.

Specify three digits for the tone number.

• See the separate “Appendix” for a complete list of available

tones.

• When one of the drum sets is selected, each keyboard key

is assigned a different percussion sound.

3.

Try playing something on the keyboard.

The tone of the instrument you selected will sound.

Pressing cr toggles between the piano and organ modes.

Each press of cr toggles the tone setting between a piano

tone (Tone Number 001) and an organ tone (Tone Number

079).

In addition to the tone number, you also can configure the

settings listed below.

brbr

bnbn

ctctcoco cpcp crcr

Select from a variety of musical

instrument sounds

To select an instrument for playing

Example: To select 001, enter 0 3 0 3 1.

St .GrPno

Tone nameTone number Playing with a Piano or Organ Tone

Reverb : “06”

Transpose : “00”

Touch Response : Off:Returns to initial default

On: No change

Pedal Effect : SUS

Rhythm Number : “161” (When a piano tone is selected)

“094” (When an organ tone is selected)

Accompaniment : Rhythm part only

Local Control : On

Drum Assign : Off

Split : Off

Layer : Off

Chorus : Off

Octave Shift (Upper): “0”

Auto Harmonize : Off

Arppegiator : Off

Scale : Equal

CTK5200_A5_x1a_EN_ES.indd 16 2014/07/24 12:13:12

English

Controlling the Keyboard Sounds

E-15

You can use the following procedure to layer two different

tones (such as piano and strings) so they sound

simultaneously when you press a keyboard key.

1.

Select the first tone you want to use.

Press bn (TONE) and then use br (10-key) to select the

tone you want.

2.

Press cp.

3.

Use br (10-key) to select the second tone you

want.

4.

Play something on the keyboard.

Both tones sound at the same time.

5.

Pressing cp again to unlayer the keyboard (so

it plays only the tone you selected in step 1).

• Each press of cp toggles between layered (two tones)

and unlayered (one tone).

You can use the procedure below to assign different tones to

the right range and left range of the keyboard, so it sounds

like you are playing an ensemble between two instruments.

1.

Select the tone for the right side range (page

E-14).

Press bn (TONE) and then use br (10-key) to select the

tone you want.

2.

Press co.

3.

Use br (10-key) to select the left side range

tone you want.

4.

Play something on the keyboard.

This will sound the tones assigned to the left and right

side ranges of the keyboard.

Layering Two Tones

Example: 032 ELEC.PIANO 1

Example: 205 STRINGS

E.Pi ano1

Lights

St r in

g

s

Splitting the Keyboard between

Two Different Tones

To select the two tones for a split keyboard

Example: 303 FLUTE 1

Example: 064 VIBRAPHONE 1

Flute 1

Lights

Vi bes 1

VIBRAPHONE 1 FLUTE 1

F3

Split point

CTK5200_A5_x1a_EN_ES.indd 17 2014/07/24 12:13:12

Controlling the Keyboard Sounds

E-16

5.

Pressing co again to unsplit the keyboard (so it

plays only the tone you selected in step 1).

• Each press of co toggles between split (two tones) and

unsplit (one tone).

• If you turn on both layer and split, layering will be applied to

the right side range of the keyboard only.

1.

While holding down co, press the keyboard key

where you want the split point to be.

The key you press will become the lowest note of the right

side range of the split keyboard.

Reverb adds reverberation to notes. You can change the

duration of the reverb.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“Reverb” (page E-7).

2.

Use the br (10-key) [–] and [+] keys to select

the reverb setting you want.

Chorus is a function that adds depth and breadth to notes. It

makes you sound as if you are playing multiple instruments.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“Chorus” (page E-7).

2.

Use the br (10-key) [–] and [+] keys to select

the chorus type you want.

There are five chorus types, plus an off setting.

• The actual effect produced by chorus depends on the tone

you are using.

To change the split point

Example: Setting middle C (C4) as the split point.

Using Reverb

Off (oFF) Turns off reverb.

1 to 10 The larger the number selected, the longer

the reverb duration.

C 4

Key name

Reverb

Indicator disappears when reverb is turned off.

Using Chorus

Chorus

Indicator disappears when chorus is turned off.

CTK5200_A5_x1a_EN_ES.indd 18 2014/07/24 12:13:13

English

Controlling the Keyboard Sounds

E-17

A pedal can be used to change notes in various ways while

playing.

• A pedal unit does not come with the Digital Keyboard.

Purchase one separately from your retailer. See page E-3

for information about options.

Connect an optional pedal unit.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“OTHER” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “Jack”.

4.

Use the br (10-key) [–] and [+] keys to select

the pedal effect you want.

• The following shows the available pedal effects.

The transpose feature lets you change the pitch, in semitone

steps. A simple operation lets you instantly change the pitch

to match that of a singer.

• The transpose setting range is –12 to +12 semitones.

1.

Press ct (FUNCTION).

2.

Use the br (10-key) [–] and [+] keys to select

the transpose setting you want.

Use the tuning feature when you need to adjust the pitch

slightly to play along with another musical instrument. Also,

some artists perform their music with slightly altered tuning.

You can use the tuning feature to adjust tuning so it exactly

matches a performance on a CD.

• The tuning feature specifies the frequency of the A4 note.

You can set a frequency within the range of 415.5 to

465.9 Hz. The initial default setting is 440.0 Hz.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“Tune”.

2.

Use the br (10-key) [–] and [+] keys to adjust

the tuning.

• Performing this step causes the display to change from

“Tune” to a value that indicates the current frequency

setting as shown below. You can change the frequency

in 0.1 Hz steps.

• Even if you do not perform a br (10-key) operation to

adjust the tuning, the current frequency setting will

appear automatically after a few seconds.

Using a Pedal

Connecting a Pedal Unit

Selecting the Pedal Effect

Sustain

(SUS)

Sustains notes played while the pedal is

depressed. Organ and other similar tone

notes are sustained even if the pedal is not

pressed.

Sostenuto

(SoS)

Sustains notes that are playing when the

pedal is depressed before the keyboard keys

are released.

Soft

(SFt)

Slightly softens notes played while the pedal

is depressed.

Rhythm

(rHy)

Pressing the pedal starts and stops Auto

Accompaniment or song playback.

SUSTAIN/ASSIGNABLE JACK

OTHER

Flashes

Jack

Changing the Pitch

(Transpose, Tuning, Octave Shift)

Changing the Pitch in Semitone Steps

(Transpose)

Fine Tuning (Tuning)

Trans .

Tune

440.0Hz

CTK5200_A5_x1a_EN_ES.indd 19 2014/07/24 12:13:13

Controlling the Keyboard Sounds

E-18

Octave Shift lets you raise or lower the pitch of the keyboard

notes in octave units.

• The octave shift setting range is –2 to +2 octaves.

• When using Split (page E-15), you can individually set the

left and right keyboard ranges to the pitches you want.

1.

Keep pressing cp until the screen shown below

appears on the display.

If you want to use Split, turn on Split before pressing cp.

• If you do not perform any operation for a few seconds

after this screen appears, the display will return to the

previous screen automatically.

2.

Use the br (10-key) [–] and [+] keys to shift the

octave.

3.

Press cp.

4.

Press cp again.

You can use the pitch bend wheel to slide the pitch of notes

smoothly upwards and downwards. This technique makes it

possible to produce effects that are similar to sounds

produced when bending notes on a saxophone or electric

guitar.

1.

While playing a note on the

keyboard, rotate the pitch bend

wheel on the left of the keyboard

upwards or downwards.

The amount the note bends depends on how

much you rotate the pitch bend wheel.

• Do not have the pitch bend wheel rotated

as you turn on the Digital Keyboard.

Use the following procedure to specify how much the pitch of

the note changes whenever the pitch bend wheel is rotated

upwards or downwards. You can specify a range from 0 to 12

semitones (one octave).

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“OTHER” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “Bend Rng”.

4.

Use the br (10-key) [–] and [+] keys to change

the range.

Octave Shift

• Split On : This step affects the right side keyboard

range only.

• Split Off : This step affects the entire keyboard range.

• Split On : The screen shown below will appear. Use the

br (10-key) [–] and [+] keys to shift the

octave for the left side keyboard range.

• Split Off : The screen shown below will appear.

Advance to step 4.

Oc tU

pp

er

Oc t Lowe r

Using the Pitch Bend Wheel to

Shift the Pitch of Notes

To play with the pitch bend wheel

Specifying the Pitch Bend Range

OTHER

Flashes

Bend Rn

g

CTK5200_A5_x1a_EN_ES.indd 20 2014/07/24 12:13:14

English

E-19

Sampling Sounds and Playing Them on the Digital

Keyboard

You can sample a sound from a portable audio player or other

device, and then play the sound on the keyboard. You can

sample and use passages from a CD. The sampling feature is

a great way to create new sounds that are highly creative.

• Before connecting, make sure that this Digital

Keyboard, as well as the external device being

connected, are all turned off.

1.

Connect an external device to the Digital

Keyboard.

2.

Turn down the volume levels of the external

device and the Digital Keyboard.

3.

Turn on the external device, and then turn on

the Digital Keyboard.

• Sampled sounds are recorded in monaural.

Use the procedures in this section to sample a sound and play

it as the melody part on the Digital Keyboard.

• Up to five sampled sounds can be stored in Digital

Keyboard memory as tone numbers 601 through 605.

Simply select the tone number where the sound you want is

located to assign the sound to the keyboard.

1.

Press bn (TONE) and then use br (10-key) to

enter the tone number (601 to 605) where you

want to store the sampled sound.

2.

Press cr and cs at the same time.

This enters sampling standby.

The allowable sampling time (in seconds) will appear on

the display momentarily and then the display will change

to the following.

crcr cscsbsbs btbt ckck clcl cmcm cncn

bobo bnbn brbr

ctct

Connection and Preparation

• Connection of an external device requires commercially

available connecting cords, supplied by you.

Connecting cords should have a stereo mini plug on

one end and a plug that matches the configuration of

the external device on the other end.

Digital Keyboard AUDIO IN jack

Stereo mini plug

CD player, Cassette player,

etc.

Sampling and Playing a Melody

Sound (Melody Sampling)

To sample a sound

No Da t a

No sampled sound stored

Lights

Flashes

W

aitin

g

CTK5200_A5_x1a_EN_ES.indd 21 2014/07/24 12:13:14

Sampling Sounds and Playing Them on the Digital Keyboard

E-20

3.

Output sound from the external device.

Sampling will start automatically.

• Sampling will not start if the volume of the sound is too

low.

4.

After the sound you want to sample is finished,

press cr and cs at the same time.

Sampling will stop.

• Even if you do not press cr and cs, sampling will stop

automatically whenever there is no more sound being

input from the external device. Sampling also will stop

automatically 10 seconds after it is started.

5.

Play something on the Digital Keyboard.

• You may not be able to get 10 seconds of sampling if

Digital Keyboard memory is low due to storage of other

data. If this happens, deleting other memory data you no

longer need will free up memory space and you should be

able to sample for 10 seconds. See “Deleting a Sampled

Sound” on page E-25 for more information.

• Sampling sound and storing it will delete any sound

data currently stored under the same tone number. To

help ensure that you do not accidentally delete

important data, be sure to read “Protecting Against

Accidental Deletion of Sampled Sounds” on page E-26.

■How sampled sounds are played

Pressing Middle C (C4) will play back the original sound. The

keys to the left and right of C4 play the sound at different

pitches.

You can use the following procedure to loop a sampled sound

so it continues to repeat, as you play on the Digital Keyboard.

1.

Press bo (RHYTHM).

2.

Press cr and ct at the same time.

This enters repeat standby.

3.

Press the button (bt to cn) that corresponds to

the melody sampling tone number you want to

select.

This will start looped playback of the selected sound.

4.

Press the same button again to stop playback.

5.

Press bs to return to the screen that was

displayed before step 2 of this procedure.

Flashes

Sam

p

l in

g

S1 :Or

g

nl

Sampled sound 1

Used memory

(Unit: Kbytes) Remaining

memory capacity

Looping a Sampled Sound

To select this tone number: Press this button:

601 bt

602 ck

603 cl

604 cm

605 cn

C4

S

y

n t h P o

p

Lights

CTK5200_A5_x1a_EN_ES.indd 22 2014/07/24 12:13:14

English

Sampling Sounds and Playing Them on the Digital Keyboard

E-21

You can use the following procedure to change the volume

level of the looped playback of each sampled sound, if you

want.

1.

Press the button of the sampled sound whose

volume you want to change (bt to cn).

• This will cause the sounds loop to sound.

2.

While the loop is sounding, hold down the same

sampled sound button (bt to cn) as you press

any keyboard key.

• Pressing the keyboard key quickly will increase sample

sound volume, while pressing slowly will decrease

volume.

3.

After the sampled sound is at the volume level

you want, release its button (bt to cn).

You can apply various effects to sampled sounds.

1.

Press bn (TONE) and then use br (10-key) to

enter the tone number (601 to 605) to which

you want to apply effects.

2.

Press bn (TONE) to cycle through the available

effects, described below.

• Avoid assigning the same sampled sound to the keyboard

for play along and for looped play. Doing so will cause, the

Loop 1 effect to be applied to the keyboard tone while

looped play of the sampled sound is being performed.

Changing the Volume of Sampled Sound

Looped Playback

Applying Effects to a Sampled Sound

Effect Type

(Display) Description

Original (Orgnl) Normal sampled tone (no looping, no

effect).

Loop 1 (Loop1) Loops the sampled sound.

Loop 2 (Loop2)

Loops the sample sound and raises the

pitch of the resonating sound when the

keyboard key is released.

Loop 3 (Loop3)

Loops the sample sound and lowers the

pitch of the resonating sound when the

keyboard key is released.

Pitch 1 (Ptch1) Changes the pitch from low to high, at an

increasing rate.

Pitch 2 (Ptch2) Changes the pitch from high to low, at a

decreasing rate.

Pitch 3 (Ptch3)

Changes the pitch from high to low, at a

decreasing rate, and then raises the pitch

when the key is released.

Tremolo (Treml) Alternates volume between high and low.

Funny 1 (Funy1) Adds vibrato and changes the pitch by a

gradually increasing amount.

Funny 2 (Funy2) Alternates between high pitch and low

pitch.

Funny 3 (Funy3) Adds vibrato and changes the pitch from

low to high.

CTK5200_A5_x1a_EN_ES.indd 23 2014/07/24 12:13:14

Sampling Sounds and Playing Them on the Digital Keyboard

E-22

You can use the procedure to change the drum sounds that

are assigned to each keyboard key.

• You can store up to three drum sets and store them as tone

numbers 606, 607, and 608. Simply select the tone number

where the drum set you want is located to assign the drum

set sounds to the keyboard.

1.

Press bo (RHYTHM).

2.

Press bn (TONE) and then use br (10-key) to

enter the tone number (606, 607, or 608) for the

drum set whose sounds you want to change.

3.

Press cr and cs at the same time.

4.

Press the keyboard key to which you want to

assign the drum sound you are about to

sample.

This enters sampling standby.

The allowable sampling time (in seconds) will appear on

the display momentarily and then the display will change

to the following.

5.

Output sound from the external device.

Sampling will start automatically.

• Sampling will not start if the volume of the sound is too

low.

Incorporating a Sampled Sound

into a Drum Set (Drum Sampling)

No Da t a

Lights

No Da t a

Flashes

Flashes

W

aitin

g

Flashes

Sam

p

l in

g

CTK5200_A5_x1a_EN_ES.indd 24 2014/07/24 12:13:14

English

Sampling Sounds and Playing Them on the Digital Keyboard

E-23

6.

After the sound you want to sample is finished,

press cr and cs at the same time.

Sampling will stop.

• Even if you do not press cr and cs, sampling will stop

automatically whenever there is no more sound being

input from the external device. Sampling also will stop

automatically 10 seconds after it is started.

7.

Press the keyboard key.

• You can repeat steps 3 through 6 to change other sounds

that make up the currently selected drum set. There are

eight sounds per drum set.

• You may not be able to get 10 seconds of sampling if

Digital Keyboard memory is low due to storage of other

data. If this happens, deleting other memory data you no

longer need will free up memory space and you should be

able to sample for 10 seconds. See “Deleting a Sampled

Sound” on page E-25 for more information.

• Sampling a sound will delete any sound data currently

assigned to the same keyboard key. To help ensure

that you do not accidentally delete important data, be

sure to read “Protecting Against Accidental Deletion of

Sampled Sounds” on page E-26.

You can use the procedures in this section to copy the drum

sound assigned to one keyboard key to another key, to

change the pitch of a sound, and to delete a sampled sound.

1.

Press bn (TONE) and then use br (10-key) to

enter the tone number (606, 607, or 608) for the

drum set you want.

2.

Press cr and cs at the same time.

3.

Press ct (FUNCTION).

This is the editing mode.

• While in the editing mode, you can copy a sound,

change the pitch of a sound, or delete a sound (each of

which is described below). Pressing ct (FUNCTION)

again exits the editing mode and returns to step 2 of

this procedure.

■To copy a sampled sound from one key to

another

While holding down the keyboard key to which the sampled

sound you want to copy is assigned, press the keyboard key

to which you want to copy it.

• A keyboard key that already has a sampled sound assigned

cannot be selected as a copy destination.

Used memory

(Unit: Kbytes) Remaining

memory capacity

Sm

p

l D rm1

Editing Sampled Drum Set Sounds

Example: To copy sampled sound of key C4 to key D4

Sm

p

l D rm1

Flashes at high

speed

Indicates keyboard keys that have sounds assigned.

Indicates the keyboard key whose sound was copied.

CTK5200_A5_x1a_EN_ES.indd 25 2014/07/24 12:13:15

Sampling Sounds and Playing Them on the Digital Keyboard

E-24

■To change the pitch of a sampled sound

While holding down the keyboard key of the sampled sound

whose pitch you want to change, use the br (10-key) [–] and

[+] keys to change the pitch.

• You can change the pitch within a range of –64 to 63

semitones.

■To delete a keyboard key’s sampled sound

While holding down the keyboard key whose sound you want

to delete, press bo (RHYTHM). In response to the “DelSure?”

message that appears, press the br (10-key) [+] (YES) key to

delete, or [–] (NO) to cancel the delete operation.

• Deleting a sampled sound will return the key to its initial

default built-in sound.

Use the following procedure to change the rhythm part of an

Auto Accompaniment pattern to a drum set sound that you

sampled.

1.

Press bo (RHYTHM) and then use br (10-key)

to enter the rhythm number of the Auto

Accompaniment pattern you want.

You cannot use a Drum Sampling Tone in a user rhythm,

so do not select a user rhythm in the above step.

2.

Press bn (TONE) and then use br (10-key) to

enter the tone number of the sampling drum set

that contains the sound you want to use.

3.

Press bn (TONE).

This changes the rhythm part of the Auto Accompaniment

pattern you selected in step 1 to the sampled sound you

selected in step 2.

• To change the Auto Accompaniment rhythm part back

to its original sound, press bn (TONE) again.

• Some rhythm part drum sounds cannot be replaced by

sampled sounds.

Normally when the Digital Keyboard is in sampling standby, it

will start sampling automatically whenever it detects sound

input. You can use the following procedure to enable manual

sampling start, which will cause sampling to wait until you

press a button to start it. You can use this to insert silence

before the sampled sound.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“SAMPLING” (page E-7).

2.

Press the br (10-key) [9] (ENTER) key.

3.

Press the br (10-key) [–] key to turn off

automatic sampling start.

This enables manual sampling start, which operates as

described below.

• Melody sampling (page E-19):

Sampling starts when you press cr and cs at the

same time, which you press in step 2 of the sampling

procedure.

• Drum sampling (page E-22):

Sampling starts when you release the Digital Keyboard

key you press in step 4 of the sampling procedure.

Example: To delete the sound assigned to key D4

Using a Drum Sampling Tone in Auto

Accompaniment (Drum Assign)

Disappears

Other Sampling Functions

Changing to a Manual Sampling Start

SAMPL I NG

Flashes

Au t oSt r t

CTK5200_A5_x1a_EN_ES.indd 26 2014/07/24 12:13:15

English

Sampling Sounds and Playing Them on the Digital Keyboard

E-25

Normally the Digital Keyboard will stop sampling automatically

whenever it detects there is no sound input. You can use the

following procedure to enable manual sampling stop, which

will cause sampling to continue until you press a button to

stop it. You can use this to insert silence after the sampled

sound.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“SAMPLING” (page E-7).

2.

Press the br (10-key) [9] (ENTER) key.

3.

Press the br (10-key) [6] (p) key.

4.

Press the br (10-key) [–] key to turn off

automatic sampling stop.

Sampling continues until you perform one of the

operations below, even if nothing is being input from an

external device.

• Melody sampling (page E-19)

Press cr and cs at the same time.

• Drum sampling (page E-22)

Press cr and cs at the same time, or press any

keyboard key.

You can use the following procedure to specify a sampled

tone number and delete its data.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“DELETE” (page E-7).

2.

Press the br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [–] and [+] keys to select

the tone number of the data you want to delete.

4.

Press the br (10-key) [9] (ENTER) key.

This displays a delete confirmation message.

5.

Press the br (10-key) [+] (YES) key to delete the

data, or [–] (NO) or [7] (EXIT) to cancel the

delete operation.

• After the delete procedure is complete, “Complete” will

appear on the display followed by the screen in step 1

of the above procedure.

• For information about deleting individual drum sounds

in a drum sampling set, see “Editing Sampled Drum Set

Sounds” on page E-23.

Changing to Manual Sampling Stop

AutoSto

p

Deleting a Sampled Sound

DELETE

Flashes

S1 :Or

g

nl

Used memory

(Unit: Kbytes) Remaining

memory capacity

Sure?

CTK5200_A5_x1a_EN_ES.indd 27 2014/07/24 12:13:15

Sampling Sounds and Playing Them on the Digital Keyboard

E-26

You can use the following procedure to protect each sampled

sound against accidental deletion.

1.

Press bn (TONE) and then use br (10-key) to

enter the tone number of the sampled tone you

want to protect.

2.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“SAMPLING” (page E-7).

3.

Press the br (10-key) [9] (ENTER) key.

4.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “Protect”.

5.

Press the br (10-key) [+] key to turn on

protection.

Once protected a tone cannot be deleted.

A protected tone is indicated as shown below.

■Saving Sample Data on an External Device

• Memory card (page E-59)

• Computer (page E-68)

Protecting Against Accidental Deletion of

Sampled Sounds

Protec t

*

1:Or

g

nl

Protected

CTK5200_A5_x1a_EN_ES.indd 28 2014/07/24 12:13:15

English

E-27

Playing Built-in Songs

With this Digital Keyboard, built-in tune data is referred to as

“songs”. You can listen to the built-in songs for your own

enjoyment, or you can play along with them for practice.

• In addition to simple listening enjoyment, the built-in songs

can be used with the lesson system (page E-31) for

practice.

• You can increase the number of tunes using your memory

cards (page E-59) or computer (page E-65).

Use the following procedure to play back built-in songs.

1.

Press bk and bl at the same time.

This will start playback of the demo songs.

• See page E-75 for information about song numbers and

the song sequence.

• Demo playback always starts from song number 151.

2.

To change to another song while demo

playback is in progress, use br (10-key) [–] and

[+] keys to enter the song number you want

(page E-7).

This will cause demo playback to jump to the song whose

number you entered.

• You cannot use br (10-key) number buttons to select a

song.

3.

To stop demo playback, press bk.

Demo playback continues until you stop it by pressing bk.

brbr

ctct66 77 88 99 bkbk blbl bmbm

bpbp

Playing the Demo Songs

DemoTu n e

Tune nameSong numberFlashes

CTK5200_A5_x1a_EN_ES.indd 29 2014/07/24 12:13:15

Playing Built-in Songs

E-28

Use the procedure below to play back one of the built-in

songs. You can play along on the keyboard with song

playback.

1.

Press bp (SONG BANK).

2.

Use br (10-key) to enter the number of the song

you want.

• See page E-75 for a complete list of available songs.

• Use the number buttons to enter the song number.

Specify three digits for the song number.

3.

Press bk.

This starts playback of the song.

4.

Press bk again to stop playback.

Song playback will continue (repeat) until you press bk to

stop it. You can cancel song repeat by pressing 6.

Use the operations in this section to perform pause, skip

forward, and skip back operations.

■Pause

1.

Press 9.

This pauses song playback.

2.

Press 9 again to resume playback from the

point where you paused it.

■Skip Forward

1.

Press 8.

This skips song playback forward to the next measure.

Each press of 8 skips ahead one measure. Holding

down 8 skips forward at high speed until you release it.

• Pressing 8 while song playback is stopped performs

lesson function phrase skip forward (page E-32).

■Skip Back

1.

Press 7.

This skips song playback back to the previous measure.

Each press of 7 skips back one measure. Holding down

7 skips back at high speed until you release it.

• Pressing 7 while song playback is stopped performs

lesson function phrase skip back (page E-32).

Playing Back a Particular Song

Start/Stop

Example: To select 001, enter 0 3 0 3 1.

Twinkle

Tune nameSong numberLights

Key

Tempo

Beat

Measure

Fingering

Sustain pedal

Note

Indicator disappears when song repeat is turned off.

Pause, Skip Forward, Skip Back

Measure number

CTK5200_A5_x1a_EN_ES.indd 30 2014/07/24 12:13:15

English

Playing Built-in Songs

E-29

You can use the procedure in this section to repeat particular

measures for practice playing along until you master it. You

can specify the start measure and the end measure of the

section you want to play and practice.

1.

Press 6 to temporarily turn off song repeat.

2.

When song playback reaches the measure you

want to specify as the start measure, press 6.

This specifies the measure as the start measure.

3.

When playback reaches the measure you want

to select as the end measure, press 6 again.

This specifies the measure as the end measure and starts

repeat playback of the measures in the specified range.

• During repeat play you can use 9 to pause playback,

8 to skip forward, or 7 to skip back.

4.

Pressing 6 again returns to normal playback.

Changing the song number clears the start measure and

end measure of the repeat operation.

You can use the following procedure to change the speed

(tempo) in order to slow down playback to practice difficult

passages, etc.

1.

Press bm.

Use y (slower) and t (faster) to change the tempo

setting. Holding down either button changes the setting at

high speed.

• Pressing y and t at the same time will return the

current song to its original default tempo.

• Pressing bm causes the tempo value to flash on the

display. While the tempo value is flashing, you can use

br (10-key) to change it. The tempo value will stop

flashing if you do not perform any operation for a short

while.

• Changing the song number will return the song to its

original default tempo.

Repeating Playback of Specific Measures

Start End

These measures are repeated.

Disappears

Flashes

Lights

Changing Playback Speed (Tempo)

Disappears

CTK5200_A5_x1a_EN_ES.indd 31 2014/07/24 12:13:16

Playing Built-in Songs

E-30

Use the following procedure to adjust the balance between

the volume of what you play on the keyboard and song

playback volume.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“Song Vol” (page E-7).

2.

Use the br (10-key) [–] and [+] keys to adjust

the song volume.

The procedure below lets you select the same keyboard tone

as the one being used in the song and play along with your

favorite tunes.

1.

After selecting a song, hold down bp (SONG

BANK) for about two seconds until the

displayed tone name changes to the tone name

of the song.

• If your currently selected tone is the same as the song

tone, the display contents will not change.

2.

Play along with song playback.

• If you select a song that uses different tones for left and

right hand play, the right hand part tone is assigned to the

keyboard.

You can turn off the right hand part or the left hand part of a

song during playback and practice playing along with the

remaining part.

1.

Press bl to select the part you want to turn off.

Each press of bl cycles through the settings shown

below.

2.

Press bl.

This starts playback in accordance with the setting you

selected in step 1.

• During playback with one part turned off, only the notes of

the part that is turned off are shown on the display.

You can load song data from an external device and increase

the selection of songs available on the keyboard. See the

following pages for more information.

• Memory card (page E-59)

• Computer (page E-68)

• For information about how to delete song data loaded from

an external device, see page E-58.

Adjusting the Song Volume

Playing with the Tone as Song Playback

Son

g

Vo l

Turning Off the Part of One Hand for Practice

(Part Select)

Increasing the Selection of Songs

Right hand part off

Left hand part off

Both hand parts off

Both hand parts on

CTK5200_A5_x1a_EN_ES.indd 32 2014/07/24 12:13:16

English

E-31

Using Built-in Songs to Master Keyboard Play

To master a song, it is best to break it up into shorter parts

(phrases), master the phrases, and then put everything

together. Your Digital Keyboard comes with a Step Up Lesson

feature that helps you to do just that.

The built-in songs are pre-divided into phrases to help you

master keyboard play.

Step Up Lesson takes you through practice of the right hand

part, left hand part, and both hand parts for each phrase of a

song. Master all of the phrases and you master the song.

brbr

ctct66 77 88 bkbk blbl

bpbp

bsbs btbt ckck clcl cmcm

Phrases

Song start Song end

Phrase 1 Phrase 2 Phrase 3 . . . . Final

Phrase

Step Up Lesson Flow

Phrase 1

• Right Hand Lesson 1, 2, 3

• Left Hand Lesson 1, 2, 3

• Both Hand Lesson 1, 2, 3

4

Repeat the above to practice phrase

2, 3, 4, and so on, until you reach the

final phrase of the song.

4

After mastering all of the phrases,

practice the entire song.

4

Now you have mastered the entire

song!

CTK5200_A5_x1a_EN_ES.indd 33 2014/07/24 12:13:16

Using Built-in Songs to Master Keyboard Play

E-32

The following are the messages that appear on the display

during Step Lessons.

First, select the song, phrase, and part you want to practice.

1.

Select the song you want to practice (page

E-28).

This will select the first phrase of the song.

2.

Press cl (or 8) to move forward one phrase,

or 7 to move back one phrase.

• Holding down 8 or 7 scrolls through phrases at high

speed.

• The Digital Keyboard remembers the last phrase you

practiced for up to 20 songs. To recall the last practice

phrase for the current song (if it is available), hold down

cl.

3.

Press bl to select the part you want to practice.

Each press of bl cycles through the settings shown

below.

4.

Hold down bp (SONG BANK) for about two

seconds.

The same tone used for song playback will be assigned to

the keyboard (page E-30).

Messages that Appear during Lessons

Message Description

<Phrase> Appears when you select a phrase, when a

lesson starts, etc.

• Note that certain phrases will cause

“<Wait>” to appear instead of “<Phrase>”.

<Wait> Appears when the lesson starts with an intro

or fill-in phrase that is not included in the

phrases to be practiced. Play toll advance

automatically to the next phrase after the un-

included phrase plays, so wait until then to

start playing on the keyboard.

NextPhrs Appears when advancing automatically to the

next phrase. This message appears following

a phrase for which “<Wait>” (see above) is

displayed, and during an Auto Step Up Lesson

(page E-36).

Listen

Watch

Remember

Appears at the start of Auto Step Up lesson 1,

2, or 3 (page E-36).

From top This message appears during Auto Step Up

Lesson (page E-36) immediately before

practice from Phrase 1 up until the phrase

currently being practiced.

Complete Appears at the end of Auto Step Up Lesson

(page E-36).

Selecting the Song, Phrase, and

Part You Want to Practice

<Phrase>

Phrase number

First measure of the selected phrase

*This indicator (setting) is skipped if you press bl while

a lesson is in progress.

Right hand practice

Left hand practice

Both hand practice

*

CTK5200_A5_x1a_EN_ES.indd 34 2014/07/24 12:13:16

English

Using Built-in Songs to Master Keyboard Play

E-33

Now it is time to start the lessons. First, select the song and

part you want to practice.

First, listen to the example a few times to familiarize yourself

with what it sounds like.

1.

Press bs.

This starts example play.

2.

To stop Lesson 1, press bs or bk.

Play the song on the keyboard. During this lesson, the display

shows the key you need to press next. Voice fingering guide

also uses a simulate voice to announce which finger you

should use. Follow the instructions to press the correct

keyboard keys and play the notes. Don’t worry if you play the

wrong note. Song playback will wait until you play the correct

note. Take your time and play at your own pace.

1.

Press bt.

This starts Lesson 2.

2.

Play notes on the keyboard in accordance with

the instructions provided on the display and by

voice fingering guide.

During this lesson, the display shows the key you need to

press next. Voice fingering guide uses a simulate voice to

announce which finger you should use.

3.

To stop Lesson 2, press bt or bk.

●If you complete Lesson 2 play to the end, a score that

rates your play appears on the screen.

Lessons 1, 2, and 3

Lesson 1: Listen to the song.

Lesson 2: Watch how the song is played.

<Lesson 2 Guidance>

Master playing the correct note with the correct finger

as instructed by the guidance. Practice playing with the

correct timing.

4

Song playback will wait for you to play the correct note.

• Keyboard key goes from flashing to lit.

• Note guide sounds the correct note to be played.

• Voice Fingering Guide tells you what finger to use.

4

Pressing the correct keyboard key causes song

playback to resume and the key for the next note

flashes.

Bravo! You pass! Advance to the next lesson.

Again! Go back and try again.

Lights

Flashes

CTK5200_A5_x1a_EN_ES.indd 35 2014/07/24 12:13:16

Using Built-in Songs to Master Keyboard Play

E-34

Though song playback stands by waiting for you to press the

correct keys as in Lesson 2, the Digital Keyboard does not

provide any guidance about what note you need to play next.

Remember everything you have learned up to Lesson 2 as

you play.

1.

Press ck.

This starts Lesson 3.

2.

Play the song along with the song playback.

3.

To stop Lesson 3, press ck or bk.

• If you complete Lesson 3 play to the end, a score that

rates your play appears on the screen the same as with

Lesson 2.

After you successfully complete all of the phrases in Lessons

1, 2, and 3, it is time to try playing the entire song from

beginning to end.

1.

Use bl to turn off both hand parts and then

press bk.

Try playing with both hands and find out how the Digital

Keyboard evaluates your effort.

You can turn off phrase repeat for Lessons 1, 2, and 3.

1.

Press 6.

This disables phrase repeat play.

Use the following procedure to turn off voice fingering guide,

which tells you which finger to use to play each note in

Lesson 2 and Lesson 3.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“LESSON” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Press the br (10-key) [–] key to select the OFF

setting.

Lesson 3: Remember what you learned as

you play.

<Lesson 3 Guidance>

Press the keyboard keys you learned in Lesson 2.

4

Song playback will wait for you to play the correct note.

• Note guide sounds the correct note to be played.

4

If you are still unable to press the correct keyboard

key, the Digital Keyboard will display keyboard

guidance and voice fingering guide will tell you what

finger to use, just as in Lesson 2.

4

Pressing the correct key will cause song playback to

resume.

Playing a Particular Song All the Way

Through

Lesson Settings

Playing without Phrase Repeat

Turning Off Voice Fingering Guide

Disappears

LESSON

Flashes

S

p

eak

CTK5200_A5_x1a_EN_ES.indd 36 2014/07/24 12:13:17

English

Using Built-in Songs to Master Keyboard Play

E-35

Use the following procedure to turn off note guide, which

sounds the note to be played next in Lesson 2 and Lesson 3.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“LESSON” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “NoteGuid”.

4.

Press the br (10-key) [–] key to select the OFF

setting.

Use the following procedure to turn off performance

evaluation, which evaluates your performance and displays a

score in Lesson 2 and Lesson 3.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“LESSON” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “Scoring”.

4.

Press the br (10-key) [–] key to select the OFF

setting.

You can use the following procedure to change the length of

lesson phrases, or to configure the lesson feature so the

song is played all the way through, without being divided into

phrases.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“LESSON” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “PhraseLn”.

4.

Use the br (10-key) [–] and [+] keys to select

the phrase length you want.

The following options are available for songs loaded from

external sources only.

Turning Off Note Guide

Turning Off Performance Evaluation

No t eGu i d

Sco r i ng

Changing the Phrase Length

Off (oFF) The phrase length is from the beginning

to the end of the song.

Preset (PrE) Phrase lengths are as specified in the

song.

Short (Ln1) Length of one phrase is one measure.

Middle (Ln2) Length of one phrase is two measures.

Long (Ln3) Length of one phrase is four measures.

PhraseLn

CTK5200_A5_x1a_EN_ES.indd 37 2014/07/24 12:13:17

Using Built-in Songs to Master Keyboard Play

E-36

With Auto Step Up Lesson, the Digital Keyboard advances

through each lesson automatically.

1.

Select the song and part you want to practice

(page E-28).

2.

Press cm.

Listen to the first phrase in Lesson 1.

• In Lesson 1, the sample phrase is played only once

before advancing to Lesson 2.

3.

Auto Step Up Lesson stops automatically after

you are able to get through all of the lessons

successfully.

• In Lesson 2 and Lesson 3, the Digital Keyboard

advances to the next lesson if you are able to achieve

the “Bravo!” evaluation result.

• To cancel a lesson, press cm or bk.

• You can change the step and phrase during Auto Step Up

Lesson using 7, 8, and bs to cl.

• Starting Auto Step Up Lesson automatically turns on

phrase repeat (page E-34) and play evaluation (page

E-35). These features cannot be turned off during lessons.

■Auto Step Up Lesson Procedure

*Auto Step Up Lesson advances to the next phrase,

regardless of whether the “Bravo!” result is attained.

Using Auto Step Up Lesson

Phrase 1

Lesson 1

4

Lesson 2

4

Lesson 3

4

Phrase 2

Lesson 1

4

Lesson 2

4

Lesson 3

4

Phrase 1, 2

• Lesson 3*

4

Phrase 3

Lesson 1

4

Lesson 2

4

Lesson 3

4

Phrase 1, 2, 3

• Lesson 3*

4

Next phrase practice using the same

procedure

4

Final phrase

Lesson 1

4

Lesson 2

4

Lesson 3

4

From Phrase 1 to the final phrase

• Lesson 3*

4

Lesson complete

CTK5200_A5_x1a_EN_ES.indd 38 2014/07/24 12:13:17

English

E-37

Music Challenge Keyboard Game

Music Challenge is a game that measures your reaction

speed as you press keys in response to on-screen keyboard

indicators and fingering guide indications.

1.

Press bp (SONG BANK).

2.

Press cn.

This causes a key on the on-screen keyboard to start to

flash, and starts the Music Challenge song.

3.

After the on-screen keyboard indicator changes

from flashing to lit, press the indicated key with

the indicated finger as quickly as possible.

This causes the on-screen keyboard key to go out to let

you know that you cleared the first note. The next on-

screen keyboard key starts to flash, so get ready to press

the next key.

• The time it takes you to press the keyboard key after

the on-screen key lights appears on the display (Unit:

0.1 sec). The shorter the time, the higher your score.

• Pressing a keyboard key before the on-screen key

goes from flashing to lit, will not advance to the next

note.

4.

The game ends when you advance successfully

through 20 notes.

• Your playing time appears on the display. After a short

while, the playing time display changes to a score. To

clear the score from the display, press bn (TONE), bo

(RHYTHM), or bp (SONG BANK).

• You can cancel a game at any time by pressing cn or

bk.

• Notes and fingering guide fingers are indicated randomly.

• The tempo of the game songs cannot be changed.

• All buttons except 1, bk, and cn are disabled while a

game is in progress.

bkbk

bpbpbobo11 bnbn

cncn

M . CHAL . !

Fingering

Displayed during a game.

Number of remaining notes

M . CHAL . !

Time 0.3sec

Score 80

Time19.2

Playing time

Score

CTK5200_A5_x1a_EN_ES.indd 39 2014/07/24 12:13:17

E-38

Using Auto Accompaniment

With Auto Accompaniment, simply select an accompaniment

pattern. Each time you play a chord with your left hand the

appropriate accompaniment will play automatically. It’s like

having a personal backup group along with you wherever you

go.

• Auto Accompaniments are made up of the following three

parts.

(1) Rhythm

(2) Bass

(3) Harmony

You can have only the rhythm part play, or you can have all

three parts play at the same time.

The rhythm part is the foundation each Auto Accompaniment.

Your Digital Keyboard comes with a variety of built-in rhythms,

including 8-beat and waltz. Use the following procedure to

play the basic rhythm part.

1.

Press bo (RHYTHM).

2.

Use br (10-key) to select the rhythm number

you want.

• See the separate “Appendix” for information about

individual rhythms.

• Use the number buttons to enter the rhythm number.

Specify three digits for the rhythm number.

3.

Press bk or 7.

This starts the rhythm.

4.

Play along with the rhythm.

5.

To stop the rhythm, press bk again.

bkbk

bpbpbobo bnbnbqbq brbr

99 bmbm66 77 88 blbl cqcq cscs ctct

Playing the Rhythm Part Only

Starting and Stopping the Rhythm Part Only

Example: To select 001, enter 0 3 0 3 1.

S

y

n t h P o

p

Rhythm number Rhythm pattern name

This pattern changes with each beat.

CTK5200_A5_x1a_EN_ES.indd 40 2014/07/24 12:13:17

English

Using Auto Accompaniment

E-39

Playing a chord with your left hand automatically adds bass

and harmony accompaniment parts to the currently selected

rhythm. It is just like having your own personal back up group

on call.

1.

Start play of the Auto Accompaniment rhythm

part.

2.

Press bl.

This enables chord input on the accompaniment

keyboard.

3.

Use the accompaniment keyboard to play

chords.

This will cause bass and harmony Auto Accompaniment

parts to be added to the rhythm part.

4.

Play other chords with left hand as you play the

melody with your right hand.

5.

Pressing bl again returns to rhythm only

accompaniment.

• For information about starting Auto Accompaniment as

soon as a chord is played, see “Using Synchro Start” on

page E-42.

• You can use the split point to change the size of the

accompaniment keyboard range (page E-16).

You can select from among the following five chord input

modes.

• FINGERED 1

• FINGERED 2

• FINGERED 3

• CASIO CHORD

• FULL RANGE CHORD

1.

Hold down bl until the chord input mode

selection screen appears on the display.

2.

Use the br (10-key) [–] and [+] keys to select

the chord input mode you want.

• If you do not perform any operation after the chord input

mode selection screen appears, the display will return

automatically to the screen that was displayed before

you held down bl.

Playing All Parts

Auto Accompaniment with Chords

Example: Pressing D-F#-A-C on the accompaniment keyboard

4

Accompaniment for the D-F#-A-C chord (D7) sounds.

Accompaniment keyboard

Lights

F3

Chords

(no melody played) Melody

Selecting a Chord Input Mode

Chord

Chord input mode

CTK5200_A5_x1a_EN_ES.indd 41 2014/07/24 12:13:18

Using Auto Accompaniment

E-40

■FINGERED 1, 2, and 3

With these three input modes, you play chords on the

accompaniment keyboard using their normal chord fingerings.

Some chord forms are abbreviated, and can be fingered with

one or two keys.

See page E-76 for information about chords that are

supported and how they are fingered on the keyboard.

●FINGERED 1

Play the component notes of the chord on

the keyboard.

●FINGERED 2

Unlike FINGERED 1, 6th input is not

possible. m7 or m7b5 is input.

●FINGERED 3

Unlike FINGERED 1, allows input of

fraction chords with the lowest keyboard

note as the bass note.

■CASIO CHORD

With CASIO CHORD, you can use

simplified fingerings to play the four types

of chords described below.

CASIO CHORD Fingering

• When playing a minor, seventh, or minor seventh chord, it

makes no different whether the additional keys you press

are black or white.

■FULL RANGE CHORD

With this mode, you can use the full range

of the keyboard to play chords and the

melody.

See page E-76 for information about

chords that are supported.

Accompaniment keyboard

Accompaniment keyboard

Chord Type Example

Major Chords

Letters above the accompaniment

keyboard indicate the chord assigned

to each key. Pressing a single

accompaniment area key in the

CASIO CHORD mode will play the

major chord whose name is marked

above the key. All of the

accompaniment area keys that are

marked with the same chord name

play exactly the same chord.

C (C Major)

Minor Chords

To play a minor chord, press the

accompaniment area key that

corresponds to the major chord, while

also pressing one other

accompaniment area key to the right.

Cm (C Minor)

Seventh Chords

To play a seventh chord, press the

accompaniment area key that

corresponds to the major chord, while

also pressing two other

accompaniment area keys to the right.

C7 (C Seventh)

Minor Seventh Chords

To play a minor seventh chord, press

the accompaniment area key that

corresponds to the major chord, while

also pressing three other

accompaniment area keys to the right.

Cm7

(C Minor Seventh)

A

CCDE F F

#

b

E

#

G

b

AB

B

b

CCDE F

E

#

b

A

CCDE F F

#

b

E

#

G

b

AB

B

b

CCDE F

E

#

b

A

CCDE F F

#

b

E

#

G

b

AB

B

b

CCDE F

E

#

b

A

CCDE F F

#

b

E

#

G

b

AB

B

b

CCDE F

E

#

b

Accompaniment keyboard / Melody keyboard

CTK5200_A5_x1a_EN_ES.indd 42 2014/07/24 12:13:18

English

Using Auto Accompaniment

E-41

Use the following procedures to play intro and ending

patterns, to play fill-in patterns, and to play variations of basic

Auto Accompaniment patterns.

■Auto Accompaniment Variation

Each Auto Accompaniment pattern has a basic “normal

pattern” as well as a “variation pattern”.

1.

Press 8.

This starts the variation pattern.

2.

Pressing 7 returns to normal pattern.

■Auto Accompaniment Intro

Use the following procedure to play an intro of a few

measures.

1.

Press 6.

This starts the intro pattern. Normal pattern play will start

when the intro pattern is finished.

• If you press 8 while an intro pattern is being played,

the variation pattern will start when the intro pattern is

finished.

■Auto Accompaniment Fill-in

Use the procedure below to play a fill-in pattern during a

performance.

• A “fill-in” is a short phrase played where you want to

change the mood of a piece. A fill-in pattern can be used to

create a link between two melodies or an accent.

• Normal and variation patterns have their own unique fill-in

patterns.

●Normal Pattern Fill-in

1.

While a normal pattern is playing, press 7.

This plays the fill-in for the normal pattern.

• Normal pattern play will resume after the fill in pattern is

complete.

●Variation Pattern Fill-in

1.

While a variation pattern is playing, press 8.

This plays the fill-in for the variation pattern.

• Variation pattern play will resume after the fill in pattern

is complete.

■Auto Accompaniment Ending

Use the following procedure to play an ending of a few

measures.

1.

While an Auto Accompaniment is playing, press

9.

This will play the ending pattern and then stop Auto

Accompaniment play automatically.

Using Auto Accompaniment

Effectively

Auto Accompaniment Pattern Variations

Lights

Lights

Lights

Lights

Lights

Lights

CTK5200_A5_x1a_EN_ES.indd 43 2014/07/24 12:13:18

Using Auto Accompaniment

E-42

■Using Synchro Start

Use the following procedure to configure the Digital Keyboard

to start Auto Accompaniment play as soon as you press a

keyboard key.

1.

Press 9.

This enters accompaniment start standby.

2.

Play a chord on the keyboard.

This will start full part accompaniment (normal).

Any of the following operations can be performed while in

synchro standby to start a non-normal pattern.

• To start with intro pattern, press 6.

• To start with variation pattern play, press 8.

Use the following procedure to change Auto Accompaniment

speed to a level that suits you.

1.

Press bm.

Use y (slower) and t (faster) to change the tempo

setting. Holding down either button changes the setting at

high speed.

• Pressing y and t at the same time will initialize the

tempo setting in accordance with the currently selected

rhythm.

• While the tempo value is flashing, you also can use br

(10-key) to change it.

• If you do not perform any operation for a few seconds

after the tempo setting screen appears, the display will

return to the screen displayed before you pressed bm.

Use the following procedure to adjust the balance between

what you are playing on the keyboard and the volume of the

Auto Accompaniment.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“AcompVol” (page E-7).

2.

Use the br (10-key) [–] and [+] keys to adjust

the accompaniment volume.

With One-Touch Preset, the Digital Keyboard automatically

configures optimal tone, tempo, and other settings in

accordance with the rhythm pattern you select.

1.

Hold down bo (RHYTHM) until the current tone

screen appears on the display.

This will automatically apply the One-Touch Preset

settings in accordance with the rhythm pattern that is

currently selected.

2.

Play a chord on the keyboard.

This will start accompaniment automatically.

Changing Auto Accompaniment Speed

(Tempo)

Flashes

Flashes

Adjusting the Accompaniment Volume

Using One-Touch Preset

Ac om

p

Vo l

CTK5200_A5_x1a_EN_ES.indd 44 2014/07/24 12:13:18

English

Using Auto Accompaniment

E-43

Auto Harmonize automatically adds harmony to notes you

play with your right hand, which adds rich depth to the melody

of your performances. You can select from among 12 types of

Auto Harmonize to suit the type of music you are playing.

• Auto Harmonize is controlled using the same button cq as

the Arpeggiator (page E-57). Because of this, these two

functions cannot be used at the same time.

1.

Press bl to enable Auto Accompaniment with

chords (ACCOMP indicator lit) (page E-39).

• Auto Harmonize cannot be used while FULL RANGE

CHORD is selected as the chord input mode. Select

another mode if you want to use Auto Harmonize.

2.

Hold down cq until the Auto Harmonize or

Arpeggiator type number and type name appear

on the display.

• If you do not perform any operation for a few seconds,

the display will return to previous screen automatically.

3.

Use the br (10-key) [–] and [+] keys to select

the Auto Harmonize type you want.

• 013 through 102 are Arpeggiator types (page E-57). Do

not select them when using the Auto Harmonize.

4.

Press cq to turn on Auto Harmonize.

If you play chords with your left hand and the melody with

your right hand, harmony notes will be added to the

melody.

• Press cq again to turn off Auto Harmonize.

Using Auto Harmonize

Due t 1

Type number Type name

Due t 2

Type

number Type Name Description

001 Duet 1 Adds close (separated by 2 to 4

degrees) 1-note harmony below

the melody note.

002 Duet 2 Adds open (separated by more

than 4 to 6 degrees) 1-note

harmony below the melody note.

003 Country Adds country style harmony.

004 Octave Adds the note from the next lower

octave.

005 5th Adds the fifth degree note.

006 3-Way Open Adds 2-note open harmony, for a

total of three notes.

007 3-Way Close Adds 2-note close harmony, for a

total of three notes.

008 Strings Adds harmony that is optimal for

strings.

009 4-Way Open Adds 3-note open harmony, for a

total of four notes.

010 4-Way Close Adds 3-note close harmony, for a

total of four notes.

011 Block Adds block chord notes.

012 Big Band Adds big band style harmony.

St .GrPno

Lit when on

CTK5200_A5_x1a_EN_ES.indd 45 2014/07/24 12:13:18

Using Auto Accompaniment

E-44

You can use the Chord Book to look up chords that you do not

know how to play.

1.

Press cs.

2.

On the chord keyboard, press the keyboard key

that corresponds to the root note of the chord

you want to look up.

3.

Use the br (10-key) [–] and [+] keys to select

the type of chord you want.

Selecting a chord type causes the chord to sound, and

shows the chord name and its notes on the display.

• You can select any one of the following chord types.

• To display inverted forms of the chord, use br (10-key)

keys [0] through [4] as shown below.

4.

After you are finished looking up what you

want, press cs to exit the Chord Book.

• You can also exit the chord book by pressing bn

(TONE), bo (RHYTHM), bp (SONG BANK), or bq.

Looking Up the Notes of Chords

(Chord Book)

Example: To look up C

ChordBk

Chord keyboard

ChordBk

Root note

Example: Selecting M (Major)

M(Major), m(minor), dim, aug, sus4, sus2, 7th, m7,

M7, m7b5, 7b5, 7sus4, add9, madd9, mM7, dim7, 69,

6th, m6

To display this inverted form: Press this key:

Normal form 0

First inversion 1

Second inversion 2

Third inversion 3

Fourth inversion 4

M

(

Ma

j

or

)

Chord type Chord notes

CTK5200_A5_x1a_EN_ES.indd 46 2014/07/24 12:13:19

English

E-45

Editing Auto Accompaniment Patterns

You can use the procedure in this section to edit the Digital

Keyboard’s built-in Auto Accompaniment rhythm patterns and

create your own “user rhythms”.

• You can store up to 10 user rhythms in Digital Keyboard

memory, using rhythm numbers 181 through 190.

■Editable Accompaniment Patterns and

Instrument Parts

Any of the following parts that make up each rhythm that is

assigned a rhythm number can be edited.

Accompaniment patterns (intro, fill-in, etc.): 6 types

Instrument parts (drum, bass, etc.): 8 types

■Editable Contents

• Rhythm number

• Part on/off

• Tone number

• Volume level

• Left-right speaker balance (panning)

• Reverb depth (reverb send)

• Chorus depth (chorus send)

1.

Select the number of the rhythm you want to

edit.

2.

Press 4.

If the “Err Mem Full” message appears on the display, see

page E-74 for information about what you should do.

bkbk

bobo brbr

9966 77 88 blbl ctct

44

Accompaniment Pattern

Instrument

Parts

Button

I N NF V VF E

1Drum I-1 N-1 NF-1 V-1 VF-1 E-1

2Percussion I-2 N-2 NF-2 V-2 VF-2 E-2

3Bass I-3 N-3 NF-3 V-3 VF-3 E-3

4Chord 1 I-4 N-4 NF-4 V-4 VF-4 E-4

5Chord 2 I-5 N-5 NF-5 V-5 VF-5 E-5

6Chord 3 I-6 N-6 NF-6 V-6 VF-6 E-6

7Chord 4 I-7 N-7 NF-7 V-7 VF-7 E-7

8Chord 5 I-8 N-8 NF-8 V-8 VF-8 E-8

Button 677889

INTRO

NORMAL

NORMAL

FILL-IN

VARIATION

VARIATION

FILL-IN

ENDING

bl

To edit and save an Auto Accompaniment

Drm: Rh

y

.

Rhythm number

Editable content

Instrument part

Accompaniment Pattern

(Flashes)

Lights

CTK5200_A5_x1a_EN_ES.indd 47 2014/07/24 12:13:19

Editing Auto Accompaniment Patterns

E-46

3.

Press a button from 6 to 9 to select the

Accompaniment Pattern you want to edit.

The name of the pattern will appear on the display.

Pattern selected by each button

4.

Press bl to select the instrument part you want

to edit.

The part number of the part you select will flash on the

display.

5.

Press bo (RHYTHM).

This will display the rhythm name.

6.

Use the br (10-key) [–] and [+] keys to select

the rhythm number you want to assign to the

instrument part you are editing.

A different rhythm number is assigned for each instrument

part.

• You can play the data of the currently selected rhythm

number by pressing bk.

• All of the eight instrument parts of an intro (I-1 to 8)

must have the same rhythm number. If you assign

rhythm 003 to I-1, for example, 003 also will be

assigned automatically to parts I-2 through I-8. If you

then assign rhythm 004 to part I-2, for example, I-1 and

all of the other parts also will change to 004. All of the

eight parts of an ending (E-1 to E-8) also must have the

same rhythm number.

7.

To edit the other contents, press ct

(FUNCTION) to display the screen for the

setting you want.

• Each press of ct (FUNCTION) will cycle through the

settings shown below, from 1 through 6.

• Use the br (10-key) [–] and [+] keys to change the

currently selected setting.

• You can play the current settings of the editable part by

pressing bk.

*Instrument parts 1 and 2 can be assigned drum set tones

only.

8.

Repeat steps 4 through 7 as many times as

necessary to edit the parts you want for the

pattern you selected in step 3.

• If you change the rhythm number in step 6, the editable

contents (1 through 6 in the above table) you last

configured in step 7 of this procedure will be overwritten

with the settings of the newly selected rhythm.

9.

Repeat steps 3 through 8 as many times as

necessary to edit the accompaniment patterns

you want (intro through ending).

10.

Press 4.

This will display a message asking if you want to save the

user rhythm.

6: Intro

7: Normal, Normal Fill-in

(Each press toggles the selection.)

8: Variation, Variation Fill-in

(Each press toggles the selection.)

9: Ending

Drm:Rh

y

8 Variation selected

Part 6 (Chord 3)

Flashing: Part selected for editing.

Parts that contain data.

Setting Type Display Settings

1 Part on/off Part On/Off

2 Tone number*Tone 001 - 583

3 Volume level Vol. 000 - 127

4Left-right speaker

balance (panning) Pan –64 - 0 - +63

5Reverb depth

(reverb send) Rvb 000 - 127

6Chorus depth

(chorus send) Cho. 000 - 127

CTK5200_A5_x1a_EN_ES.indd 48 2014/07/24 12:13:19

English

Editing Auto Accompaniment Patterns

E-47

11-1.

Press the br (10-key) [–] key to exit without

saving.

This displays the delete confirmation message.

Press the br (10-key) [+] key to exit the editing

procedure.

11-2.

Press the br (10-key) [+] key to save the data.

• Use br (10-key) [–] and [+] keys to select the rhythm

number you want to save.

• You can edit the user rhythm name. Use the br

(10-key) [4] (o) and [6] (p) keys to move the cursor

to the character you want to change, and then use [+]

and [–] to change the character.

12.

Press br (10-key) [9] (ENTER) key.

This will display a message asking if you want to save the

user rhythm.

• Press the br (10-key) [+] key to save the data.

• Press the br (10-key) [–] key to return to the screen

that was displayed before you pressed [9] (ENTER)

key.

• If you select a user rhythm number that already

contains data, the existing data will be replaced by the

new data.

• You cannot change the tone assigned to the keyboard

while an Auto Accompaniment editing (rhythm edit)

operation is in progress.

■Saving User Rhythm Data on an External Device

• Memory card (page E-59)

• Computer (page E-68)

The following procedure cannot be performed while an Auto

Accompaniment editing (rhythm edit) operation is in

progress.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“DELETE” (page E-7).

2.

Press the br (10-key) [9] (ENTER) key.

3.

Press the br (10-key) [6] (p) key.

4.

Use the br (10-key) [–] and [+] keys to select

the user rhythm you want to delete.

5.

Press the br (10-key) [9] (ENTER) key.

This displays a delete confirmation message.

6.

Press the br (10-key) [+] (YES) key.

After the delete procedure is complete, “Complete” will

appear followed by the screen in step 2 of the above

procedure.

• To cancel the delete operation, press [–] (NO) or [7]

(EXIT) in place of [+] (YES).

S

y

n t h P o

p

To delete saved data

Used memory (Unit: Kbytes)

Remaining memory capacity

DELETE

Flashes

Use 1

User rhythm name

Sure?

CTK5200_A5_x1a_EN_ES.indd 49 2014/07/24 12:13:19

E-48

Saving Keyboard Setups to Registration Memory

Registration memory lets you store Digital Keyboard setups

(tone, rhythm, etc.) for instant recall whenever you need them.

Registration memory simplifies performance of complex

pieces that require successive tone and rhythm changes.

You can have up to 32 setups in Registration memory at one

time. bs and bt to cm are used for recording.

• Each press of bank select button bs cycles through the

bank numbers, from 1 to 8.

• Pressing a button from bt to cm selects the corresponding

area in the currently selected bank.

■Registration Save Example

This example saves the data shown in the table below to the

following setups in Bank 1.

• Initial melody setup saved to Setup 1-1.

• Second melody setup saved to Setup 1-2.

• Third melody setup saved to Setup 1-3.

■Registration Memory Data

The following is the complete list of data that is saved to a

registration memory setup.

• Tone numbers (main, layer, split)

• Rhythm number

• Tempo

• Auto Harmonize

• Transpose

• Split point

• Touch Response

• Octave shift

• Chord fingerings

• Accompaniment volume

• Arpeggiator setting (on, off, type)

• Synchro start

• Reverb (on, off, type)

• Chorus (on, off, type)

• Bend Range

• Accomp (on, off)

• Arpeggiator hold (on, off)

• Layer (on, off)

• Split (on, off)

• Pedal effect

bobo brbr

bsbs btbt ckck clcl cmcm cncn

Area 1 Area 2 Area 3 Area 4

Bank 1 Setup 1-1 Setup 1-2 Setup 1-3 Setup 1-4

Bank 2 Setup 2-1 Setup 2-2 Setup 2-3 Setup 2-4

.

.

.

.

.

.

.

.

.

.

Bank 8 Setup 8-1 Setup 8-2 Setup 8-3 Setup 8-4

bs bt ck cl cm

Setup 1–1 Setup 1–2 Setup 1–3

Tone Number 001 062 001

Rhythm Number 118 005 089

Tempo 080 140 089

CTK5200_A5_x1a_EN_ES.indd 50 2014/07/24 12:13:20

English

Saving Keyboard Setups to Registration Memory

E-49

1.

Press bo (RHYTHM).

2.

Configure the tone, rhythm, and other settings

you can to include in the setup.

3.

Press bs to select the bank you want.

Each press of bs cycles through the bank numbers.

• You also can select a bank by holding down bs as you

use the br (10-key) number buttons to enter a bank

number.

4.

While holding down cn, press a button from bt

to cm to select an area.

This will save the settings you configured in step 2 into the

applicable setup.

• If there is anything already stored in the setup, it will be

replaced (deleted) by the new setup.

1.

Press bs to select the bank that contains the

setup you want to recall.

2.

Use buttons bt to cm to select the area whose

setup you want to recall.

This will recall the registration memory setup and

automatically configure the Digital Keyboard settings

accordingly.

• Notes currently being sounded by the keyboard may stop if

you recall a setup that causes a change in octave shift

(page E-18). To keep this from happening, either select a

setup that does not cause a change in the octave shift

setting, or hold down the pedal (which will cause notes

currently being played to be sustained).

■Saving registration Data on an External Device

• Memory card (page E-59)

• Computer (page E-68)

To save a setup to registration

memory

Bank number

Bank 4

Store

Stored in Setup 4-1

To recall a setup from registration

memory

Bank 6

Recal l

Setup 6-1 recalled

CTK5200_A5_x1a_EN_ES.indd 51 2014/07/24 12:13:20

E-50

Recording Your Keyboard Play

The recorder feature lets you record your keyboard play.

Use the following procedure to record everything you play on

the keyboard.

1.

Press bo (RHYTHM).

2.

Press 3.

3.

Press 3 again.

This will enter record standby.

4.

Configure the tone, rhythm, and other settings

you want to use.

5.

Start playing.

Recording starts as soon as you play something on the

keyboard.

• You can use Auto Accompaniment while playing. If you do,

Auto Accompaniment also will be recorded.

6.

To stop recording, press bk.

7.

To play back what you have recorded, press bk

again.

Each press of bk starts and stops playback.

bobo brbr

bsbs btbt ckck clcl cmcm cncn

33 bpbp bnbn

blblbkbk

Recording and Playing Back

Keyboard Play

Lights

Flashes

Lights

CTK5200_A5_x1a_EN_ES.indd 52 2014/07/24 12:13:20

English

Recording Your Keyboard Play

E-51

8.

Press 3 twice to exit the recorder mode.

• The flashing on the screen shown in step 3 becomes

faster when remaining recorder memory capacity

becomes less than 100 notes.

• Total recorder memory capacity is approximately

12,000 notes. Recording will stop automatically when

there is no more unused recorder memory remaining.

• Each press of 3 cycles through the settings shown

below. You can listen to the recorded data as many

times as you like by pressing bk while in playback

standby.

■To delete recorded data

After step 3 of the above procedure, do hold down 3

(without pressing any keyboard key) until the message

“Tr.Del?” appears on the display. Press [+] (YES) to delete the

data, or [–] (NO) to cancel the delete operation.

• Turning off the Digital Keyboard while recording is in

progress will cause any data in recorder memory to be

deleted.

• A new recording replaces (deletes) previously recorded

contents.

You can divide a song according to various types of parts

(instrument, left and right hand, etc.), and record each part to

a specific track. You can mix up to six tracks (the original

track plus five additional tracks) into a final song.

■About tracks

Tracks are numbered from 1 to 6.

• If you do not specify a track number when recording,

recording is performed to Track 1 automatically.

In addition to what you play on the keyboard, the following

information also is recorded.

• Track 1

Settings:

Tone number, rhythm number, tempo, reverb, chorus,

chords, layer/split settings, Auto Harmonize/Arpeggiator

setting

Operations:

Pedal, pitch bend wheel, INTRO button, SYNCHRO/

ENDING button, NORMAL/FILL-IN button, VARIATION/

FILL-IN button

• Tracks 2 through 6

Tone number, pedal operation, pitch bend wheel operation

Disappears

Recorder Off Playback

Standby Record Standby

Using Tracks to Record and Mix

Parts

CTK5200_A5_x1a_EN_ES.indd 53 2014/07/24 12:13:20

Recording Your Keyboard Play

E-52

1.

Record the first part to Track 1.

To record to Track 1, perform steps 1 through 4 under

“Recording and Playing Back Keyboard Play” (page

E-50).

2.

Press 3.

This will enter record standby.

3.

Press a button from bt to cn to select the track

number of the next track to which you want to

record.

This will enter record standby for the track you selected.

• If you want to use a different tone than the one you

used in Track 1, press bn (TONE) and then use br

(10-key) to input the tone number.

4.

Press bk.

This will start playback of what you recorded up to this

point in other tracks and record what you play on the

keyboard to the currently selected track. Play the notes

you want on the keyboard.

5.

To stop recording, press bk.

• To play back what you have recorded, press bk again.

Each press of bk starts and stops playback.

6.

Repeat steps 2 through 5 to record the other

tracks.

7.

After you finish recording all of the tracks,

press bk.

• This will start playback of the recorded tracks. Press

bk to stop or restart playback.

• At this time you can turn off playback of specific tracks

using buttons bs to cn. Pressing a key toggles

playback of each track on (track number displayed) or

off (track number not displayed).

• If you want to re-record a track, press 3. This will

return to step 2 of the above procedure. Only the tracks

that are turned on (displayed) above will play as you

re-record.

8.

Press 3 twice to exit the recorder mode.

■To delete a recorded track

After step 3 of the above procedure, do hold down 3

(without pressing any keyboard key) until the message

“Tr.Del?” appears on the display. Press [+] (YES) to delete the

track, or [–] (NO) to cancel the delete operation.

To record to Tracks 1 through 6

Example: Track 2

Lights

Flashes

Flashes

Example: Tracks 2 and 3 selected

Disappears

Disappears

CTK5200_A5_x1a_EN_ES.indd 54 2014/07/24 12:13:20

English

Recording Your Keyboard Play

E-53

You can record up to five songs (numbered 1 through 5) in

memory. After that, you can select a specific song for

playback.

1.

Press bo (RHYTHM).

2.

Press 3.

A song number will appear in the upper left corner of the

display for a few seconds. While it is, use br (10-key) to

specify the number of the song you want to record or play

back. The song number will disappear if you do not

perform any operation.

3.

Press 3 to record, or bk to play back.

To stop recording or playback, press bk.

4.

Press 3 twice to exit the recorder mode.

■To delete recorded data

After step 2 of the above procedure, do hold down 3

(without pressing any keyboard key) until the message “Song

Del?” appears on the display. Press [+] (YES) to delete the

song, or [–] (NO) to cancel the delete operation.

This section explains how to play along and record along with

one of the Digital Keyboard’s built-in songs.

●The following operations and settings also are

recorded along with your keyboard play.

Tone number, song number, pedal operation, tempo, reverb,

chorus, layer/split settings, pitch bend wheel operation

• There can be only one recording of keyboard play with a

built-in song in recorder memory. Making a new recording

replaces (deletes) previously recorded data.

1.

Press bp (SONG BANK).

2.

Press 3.

This will enter playback standby.

3.

Press 3 again.

This will enter record standby.

4.

Use br (10-key) to enter the song number you

want to assign to the recording.

Recording Two or More Songs,

and Selecting One for Playback

Example: Song 2

Pla

y

No .

Recording while Playing Along

with a Built-in Song

Lights

Flashes

CTK5200_A5_x1a_EN_ES.indd 55 2014/07/24 12:13:21

Recording Your Keyboard Play

E-54

5.

Press bl to cycle through the parts in the

sequence shown below.

• Configure tone and tempo settings at this time as well.

6.

Press bk to start built-in song playback and

recorder recording.

Play along with the playback.

• To stop recording part way through, press bk.

7.

Recording will stop automatically when the end

of the built-in song is reached.

This will enter playback standby.

8.

Press bk.

This will start playback of what you recorded.

• Each press of bk starts and stops playback.

9.

Press 3 twice to exit the recorder mode.

■To delete recorded data

After step 2 of the above procedure, do hold down 3 until

the message “Song Del?” appears on the display. Press [+]

(YES) to delete the song.

You can save data you record with the Digital Keyboard onto

a memory card or on your computer’s hard disk. In the case of

a memory card, you can save recorded song data as a

standard MIDI file (SMF 0 format).

■To save data to a memory card

See page E-59.

■To save data on your computer’s hard disk

See page E-68.

Example: Left-hand part recording

Right-hand Recording

Both-hand Recording

Left-hand Recording

Flashes

Lights

Saving Recorded Data on an

External Device

CTK5200_A5_x1a_EN_ES.indd 56 2014/07/24 12:13:21

English

E-55

Other Useful Digital Keyboard Functions

You can use the following procedure to select from among 17

preset scales, including the standard Equal Temperament.

1.

Press bo (RHYTHM).

2.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“SCALE” (page E-7).

3.

Press br (10-key) [9] (ENTER) key.

4.

Use the br (10-key) [–] and [+] keys to select

the preset scale you want. After selecting a

scale, press the key on the keyboard that you

want to use as the root key (C to B).

5.

After you are finished, press ct (FUNCTION) to

assign the scale to the keyboard.

bobo brbr

bpbp bnbn

cqcq

bqbq

ctct

Changing the Scale of the

Keyboard

No. Scale name Display

00 Equal Temperament Equal

01 Pure Major PureMajr

02 Pure Minor PureMinr

03 Pythagorean Pythagor

04 Kirnberger 3 Kirnbrg3

05 Werckmeister Wercmeis

06 Mean-Tone MeanTone

07 Rast Rast

08 Bayati Bayati

09 Hijaz Hijaz

10 Saba Saba

11 Dashti Dashti

12 Chahargah Chaharga

13 Segah Segah

14 Gurjari Todi GujrTodi

15 Chandrakauns Cndrkuns

16 Charukeshi Carukesi

S C A L E

Flashes

E

q

u a l

Scale Name

CTK5200_A5_x1a_EN_ES.indd 57 2014/07/24 12:13:21

Other Useful Digital Keyboard Functions

E-56

You can use the following procedure to reflect the preset

scale you selected in Auto Accompaniments.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“OTHER” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “AcompScl”.

4.

Use the br (10-key) [+] key to select on.

Selecting a Music Preset instantly changes the Digital

Keyboard to a preset setup (tone, rhythm, tempo, etc.) for play

of songs of various genres/categories. The press of a button

sets up the Digital Keyboard so those songs sound exactly the

way you thought they should.

• See the separate “Appendix” for a complete list of the 305

Music Presets that are available.

1.

Hold down bn (TONE) until the indicator shown

below appears on the display.

2.

Use br (10-key) to select the preset number

you want.

This will change the setup (tone, rhythm, etc.) of the

Digital Keyboard.

• At this time the Digital Keyboard will go into Auto

Accompaniment synchro start standby (page E-42).

• Pressing bn (TONE), bo (RHYTHM), or bp (SONG

BANK) will return to the screen that was displayed

before you held down in step 1, above.

3.

Play along on the keyboard with the

accompaniment.

Using the Current Scale Notes for Auto

Accompaniments

Flashes

O T H E R

A c o m

p

S c l

Using Music Preset

I L o v e H e r

Preset number Preset name

Lights

CTK5200_A5_x1a_EN_ES.indd 58 2014/07/24 12:13:21

English

Other Useful Digital Keyboard Functions

E-57

The Arpeggiator makes it possible to play an arpeggio pattern

automatically. There are 90 different arpeggio patterns from

which to choose in order to match the music you are playing.

• The Arpeggiator is controlled using the same button cq as

Auto Harmonize (page E-43). Because of this, these two

functions cannot be used at the same time.

1.

Hold down cq until the Auto Harmonize or

Arpeggiator type number and type name appear

on the display.

• If you do not perform any operation for a few seconds,

the display will return to the previous screen

automatically.

2.

Use the br (10-key) [–] and [+] keys to select

the Arpeggiator type you want.

• 001 through 012 are Auto Harmonize types (page

E-43). Do not select them when using the Arpeggiator.

3.

Press cq to turn on Arpeggiator.

Playing a chord on the keyboard will start arpeggio play.

• Press cq again to turn off Arpeggiator.

• The tempo setting of the Arpeggiator is the same as that set

for the metronome (page E-12).

Use the following procedure when you want an arpeggio

pattern to keep playing after you release the keyboard keys.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“OTHER” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Press the br (10-key) [+] key to select the ON

setting.

Using the Arpeggiator

Type

number Type Name Description

013-030 Up Rising

031-048 Down Falling

049-066 U/D A

Repeat pattern alternating

between rising and falling

(Type A)

067-084 U/D B

Repeat pattern alternating

between rising and falling

(Type B)

085-102 Random Random arrangement of

notes of the pressed keys

D u e t 1

Type number Type name

1 U

p

1

Speed (The number of arpeggio notes per beat)

Octave

1... Uses the actual notes played.

2... Uses the actual notes played plus the same notes one octave.

4... Uses the actual notes played plus the same notes three octaves.

Sustaining an Arpeggio (Arpeggiator Hold)

St .GrPno

Lit when on

A r

p

e

g

H l d

CTK5200_A5_x1a_EN_ES.indd 59 2014/07/24 12:13:21

Other Useful Digital Keyboard Functions

E-58

You can use the following procedure to delete user song data

stored as song numbers 153 through 162.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“DELETE” (page E-7).

2.

Press the br (10-key) [9] (ENTER) key.

3.

Press the br (10-key) [6] (p) key twice.

4.

Use the br (10-key) [–] and [+] keys to select

the user song you want to delete.

5.

Press the br (10-key) [9] (ENTER) key.

This displays a delete confirmation message.

6.

Press the br (10-key) [+] (YES) key.

After the delete procedure is complete, “Complete” will

appear followed by the screen in step 2 of the above

procedure.

• To cancel the delete operation, press [–] (NO) or [7]

(EXIT) in place of [+] (YES).

Use the following procedure when you want to delete sampled

sounds, user songs and all other data, except for recorded

songs, currently in Digital Keyboard memory.

• Performing this procedure also will delete protected

sampled sound data (page E-26). It is recommended

that you save important data to a memory card (page

E-59) or your computer’s hard disk (page E-65).

• This operation does not delete recorded song data.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“DELETE” (page E-7).

2.

Press the br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “All Data”.

4.

Press the br (10-key) [9] (ENTER) key.

This displays a delete confirmation message.

5.

Press the br (10-key) [+] (YES) key.

After the delete procedure is complete, “Complete” will

appear followed by the screen in step 2 of the above

procedure.

• To cancel the delete operation, press [–] (NO) or [7]

(EXIT) in place of [+] (YES).

Deleting User Song Data

Used memory

(Unit: Kbytes) Remaining

memory capacity

D E L E T E

Flashes

U S E R S O N G

User song name

S u r e ?

Deleting All Data in Digital

Keyboard Memory

Used memory

(Unit: Kbytes) Remaining

memory capacity

D E L E T E

Flashes

A l l D a t a

Flashes

S u r e ?

CTK5200_A5_x1a_EN_ES.indd 60 2014/07/24 12:13:22

English

E-59

Using a Memory Card

You can save Digital Keyboard user area data to a memory

card and load data from a memory card to Digital Keyboard

memory. You also can play music files (MIDI files) stored on a

memory card on the Digital Keyboard.

• Use a memory card that satisfies the

conditions below.

Format: SDHC or SD

Capacity: 2GB to 32GB

Use of any memory cards other than

those defined above is not

supported.

• SDHC Logo is a trademark of SD-3C, LLC.

■Data that can be saved to and exported from a

memory card

• Use only memory cards. Operation is not guaranteed

when any other type of memory card is used.

• When using a memory card, make sure you observe all

of the precautions in the instructions that come with it.

• Memory cards have a write-protect switch that you can

use to protect against accidental deletion of data.

• Avoid using a memory card under the following

conditions. Such conditions can corrupt data stored on

the memory card.

• Areas subjected to high temperature, high humidity,

and corrosive gas

• Areas subjected to strong electrostatic charge and

digital noise

• Never touch the contacts of a memory card when

loading it or removing it from the Digital Keyboard.

• While data is being stored to or recalled from a memory

card, never perform any other Digital Keyboard

operation or remove the memory card. Doing so can

corrupt the data on the card and damage the card slot.

• Never insert anything besides a memory card into the

card slot. Doing so creates the risk of malfunction.

• Electrostatic charge discharging from your fingers or

the memory card to the card slot can cause

malfunction of the Digital Keyboard. If this happens,

turn the Digital Keyboard off and then back on again.

• A memory card can become quite warm after very long

use in the memory card slot. This is normal and does

not indicate malfunction.

brbr

bqbq

ctctbkbk

Supported Data Types

Data Type Description File Name

Extension

Sampled sound

(page E-19) Sampled sound data TW7

DW7*1

User rhythms

(page E-45)

Edited Auto

Accompaniment data AC7

User songs

(page E-30)

Song data imported from

an external device (cannot

be saved to a memory

card).

CM2

MID*2

Recorded songs

(page E-50) Recorded song data SP7

SL7*3

Registration

setups

(page E-48)

Tone and rhythm setup

settings RM7

All data Above data AL7

*1: Sampled drum set sounds

*2: Standard MIDI file (format 0, 1)

*3: Data recorded playing along with built-in song

Memory Card and Card Slot

Precautions

CTK5200_A5_x1a_EN_ES.indd 61 2014/07/24 12:13:22

Using a Memory Card

E-60

• Note that the memory card must be oriented correctly

when you insert it into the memory card slot. Trying to

force the memory card into the slot can damage the

card and the slot.

1.

With the top of the memory card facing

upwards (so you can see it), carefully insert the

card into the memory card slot (dt) until stops

with a click.

2.

Press the memory card into the card slot and

then release it.

This will cause the card to disengage and eject partially.

Pull the card out of the slot.

• Before using a memory card, first be sure to format it

on the Digital Keyboard.

• Before performing the procedure below, check to make

sure that the memory card does not contain any data

you might need.

• The memory card format performed by the Digital

Keyboard is a “quick format”. If you want to completely

delete all of the data on the card, format it on your

computer or using some other device.

1.

Insert the memory card you want to format into

the memory card slot.

• Make sure that the write-protect switch of the memory

card is not in the write-protect position.

2.

Press bq and ct (FUNCTION) at the same time.

3.

Press the br (10-key) [9] (ENTER) key.

This will display the format confirmation screen.

4.

Press the br (10-key) [+] (YES) key.

The message “Pls wait” will appear on the display. Do not

perform any operation while this message is displayed.

“Complete” appears on the display after formatting is

complete.

• To cancel the format operation, press [–] (NO) or [7]

(EXIT) in place of [+] (YES).

Inserting and Removing a

Memory Card

Front

Formatting a Memory Card

F o r m a t

S u r e ?

P l s w a i t

C o m

p

l e t e

CTK5200_A5_x1a_EN_ES.indd 62 2014/07/24 12:13:22

English

Using a Memory Card

E-61

Use the following procedure to save Digital Keyboard data to

a memory card.

1.

On the Digital Keyboard, select the data you

want to save as described below.

• You cannot save a user song (song data loaded from

an external device) to a memory card.

• See page E-59 for information about data types.

2.

Insert a memory card into the memory card slot.

3.

Hold down bq until the screen shown below

appears on the display.

• To cancel data save, press bq again.

4.

Use the br (10-key) [4] (o) and [6] (p) keys

to display one of the settings shown below.

• You also could use [–] and [+].

Saving a recording made while playing along with a built-in

song in SMF 0 format will save only what was played on the

keyboard.

5.

Press the br (10-key) [9] (ENTER) key.

• Enter the file name of the data you are saving. Use the

br (10-key) [4] (o) and [6] (p) keys to move the

cursor to the character you want to change, and then

use [+] and [–] to change the character.

• Pressing [7] (EXIT) will return to the screen that was

displayed before you pressed [9] (ENTER).

6.

Press the br (10-key) [9] (ENTER) key.

This will save the data to the memory card.

• If there is a file with the same name already on the

memory card, a message will appear asking if you want

to overwrite it. Press the br (10-key) [+] (YES) key to

overwrite, or [–] (NO) or [7] (EXIT) to cancel.

Saving Digital Keyboard Data to a

Memory Card

To save this type

of data Do this

Sampled sound Select the tone number of the sampled

sound you want to save.

User rhythm Select the rhythm number of the user

rhythm you want to save.

Recorded song Select the song you want to save and

put the Digital Keyboard in playback

standby.

Registration data Select one of the Digital Keyboard’s

default built in tones or rhythms.

All data

To save this data Display this screen

Sampled sound “SAv” “SmplTone”

User rhythm “SAv” “UserRhy.”

Recorded song “SAv” “Rec.Song”

Recorded song

(SMF 0 format) “SAv” “SMF 0”

Registration data “SAv” “Regist.”

All data “SAv” “All Data”

U S E R N A M E

Flashes

C o m

p

l e t e

R e

p

l a c e ?

CTK5200_A5_x1a_EN_ES.indd 63 2014/07/24 12:13:22

Using a Memory Card

E-62

• You can input the following characters in a file name.

• The Digital Keyboard displays the “~” character as “3”.

■Memory Card Data (File) Storage Locations

The above procedure stores Digital Keyboard data in a folder

named “MUSICDAT” on the memory card.

• The “MUSICDAT” folder is created automatically when you

format the memory card on the Digital Keyboard (page

E-60).

• If you store a file in any location other than inside the

“MUSICDAT” folder, you will not be able to recall, delete, or

play the file on the Digital Keyboard. You also will not be

able to recall, delete, or play any file you store inside of a

subfolder you create inside the “MUSICDAT” folder.

• The message “No File” will appear on the display if you try

to perform a recall, delete, or play operation while there is

no file inside the “MUSICDAT” folder.

Use the following procedure to load data from a memory card

into Digital Keyboard memory.

• Whenever you copy a file to the memory card that you

plan to recall on the Digital Keyboard, be sure to store

the file in the memory card’s “MUSICDAT” folder.

1.

On the Digital Keyboard, select the data you

want to load as described below.

2.

Insert the memory card that contains the data

into the memory card slot.

3.

Hold down bq until the screen shown below

appears on the display.

• To cancel data load, press bq again.

4.

Use the br (10-key) [4] (o) and [6] (p) keys

to display one of the settings shown below.

• You also could use [–] and [+].

9

J

T

'

8

I

S

_

`

7

H

R

&

~

6

G

Q

S

@

5

F

P

Z

}

4

E

O

Y

{

3

D

N

X

^

2

C

M

W

-

1

B

L

V

)

0

A

K

U

(

Loading Data from a Memory

Card into Digital Keyboard

Memory

To load this type

of data Do this

Sampled sound Select the tone number of the sampled

sound you want to load.

User rhythm Select the rhythm number of the user

rhythm you want to load.

User song Select the song number of the song you

want to load.

Recorded song Select the song you want to load and

put the Digital Keyboard in playback

standby.

Registration data Select one of the Digital Keyboard’s

default built in tones, songs, rhythms,

etc.

All data

To load this data Display this screen

Sampled sound “Lod” “SmplTone”

User rhythm “Lod” “UserRhy.”

User song “Lod” “UserSong”

Recorded song “Lod” “Rec.Song”

Registration data “Lod” “Regist.”

All data “Lod” “All Data”

CTK5200_A5_x1a_EN_ES.indd 64 2014/07/24 12:13:23

English

Using a Memory Card

E-63

5.

Press the br (10-key) [9] (ENTER) key.

• Pressing [7] (EXIT) will return to the screen that was

displayed before you pressed [9] (ENTER).

6.

Use the br (10-key) [–] and [+] keys to select

the data (file) you want to load.

7.

Press the br (10-key) [9] (ENTER) key.

This will load the data into Digital Keyboard memory.

• If there is already data stored in the user area where

you are trying to load data, an overwrite confirmation

message will appear. Press the br (10-key) [+] (YES)

key to overwrite, or [–] (NO) or [7] (EXIT) key to cancel.

Use the following procedure to delete data saved on a

memory card.

1.

On the Digital Keyboard, select the data you

want to delete as described below.

2.

Insert a memory card into the memory card slot.

3.

Hold down bq until the screen shown below

appears on the display.

• To cancel data delete, press bq again.

4.

Use the br (10-key) [4] (o) and [6] (p) keys

to display one of the settings shown below.

• You also could use [–] and [+].

* * * * * * * *

Flashes

C o m

p

l e t e

R e

p

l a c e ?

Deleting Data from a Memory

Card

To delete this

type of data Do this

Sampled sound Select the tone number of the sampled

sound.

User rhythm Select the rhythm number of the user

rhythm.

User song Select the song number of the user

song.

Recorded song Select the song and put the Digital

Keyboard in playback standby.

Registration data Select one of the Digital Keyboard’s

default built in tones, songs.

All data

To delete this type

of data Display this screen

Sampled sound “dEL” “SmplTone”

User rhythm “dEL” “UserRhy.”

User song “dEL” “UserSong”

Recorded song “dEL” “Rec.Song”

Registration data “dEL” “Regist.”

All data “dEL” “All Data”

CTK5200_A5_x1a_EN_ES.indd 65 2014/07/24 12:13:23

Using a Memory Card

E-64

5.

Press the br (10-key) [9] (ENTER) key.

• Pressing [7] (EXIT) will return to the screen that was

displayed before you pressed [9] (ENTER).

6.

Use the br (10-key) [–] and [+] keys to select

the number of the data (file) you want to delete.

7.

Press the br (10-key) [9] (ENTER) key.

This will display the delete confirmation screen.

8.

Press the br (10-key) [+] (YES) key.

• To cancel the delete operation, press [–] (NO) or [7]

(EXIT) in place of [+] (YES).

You can use the following procedure to play back user song

data (page E-59) directly from a memory card.

• Whenever you copy a file to the memory card that you

plan to play on the Digital Keyboard, be sure to store

the file in the memory card’s “MUSICDAT” folder (page

E-62).

1.

Insert the memory card that contains the data

into the memory card slot.

2.

Press bq.

This will display the file numbers and song names for the

data stored on the display.

3.

Use br (10-key) to select the song you want to

play.

4.

Press bk.

This will start playback.

• Each press of bk starts and stops playback.

For information about memory card error messages, see page

E-74.

* * * * * * * *

Flashes

S u r e ?

C o m

p

l e t e

Playing Back Data from a Memory

Card

Memory Card Error Messages

CTK5200_A5_x1a_EN_ES.indd 66 2014/07/24 12:13:23

English

E-65

Connecting External Devices

You can connect the Digital Keyboard to a computer and

exchange MIDI data between them. You can send play data

from the Digital Keyboard to commercially available music

software running on your computer, or you can send MIDI

data from your computer to the Digital Keyboard for playback.

The following shows the minimum computer system

requirements for sending and receiving MIDI data. Check to

make sure that your computer complies with these

requirements before connecting the Digital Keyboard to it.

• Operating System

• USB port

• Never connect to a computer that does not conform to

the above requirements. Doing so can cause problems

with your computer.

• Make sure you follow the steps of the procedure below

exactly. Connecting incorrectly can make data send

and receive impossible.

1.

Turn off the Digital Keyboard and then start up

your computer.

• Do not start up the music software on your computer

yet!

2.

After starting up your computer, use a

commercially available USB cable to connect it

to the Digital Keyboard.

3.

Turn on the Digital Keyboard.

• If this is the first time you are connecting the Digital

Keyboard to your computer, the driver software

required to send and receive data will be installed on

your computer automatically.

4.

Start up commercially available music software

on your computer.

brbr

ctctblbl

Connecting a Computer

Minimum Computer System Requirements

Windows® XP (SP2 or later)*1

Windows Vista® *2

Windows® 7 *3

Windows® 8 *4

Mac OS® X (10.3.9, 10.4.11, 10.5.X, 10.6.X, 10.7.X, 10.8.X)

*1: Windows XP Home Edition

Windows XP Professional (32-bit)

*2: Windows Vista (32-bit)

*3: Windows 7 (32-bit, 64-bit)

*4: Windows 8 (32-bit, 64-bit)

Connecting the Digital Keyboard to Your

Computer

B connector

Digital Keyboard USB port

Computer USB port

USB cable

(A-B type)

A connector

CTK5200_A5_x1a_EN_ES.indd 67 2014/07/24 12:13:23

Connecting External Devices

E-66

5.

Configure the music software settings to select

one of the following as the MIDI device.

• For information about how to select the MIDI device,

see the user documentation that comes with the music

software you are using.

• Be sure to turn on the Digital Keyboard first before

starting up your computer’s music software.

• Once you are able to connect successfully, there is no

problem with leaving the USB cable connected when you

turn off your computer and/or Digital Keyboard.

• This Digital Keyboard conforms to General MIDI Level 1

(GM).

• For detailed specifications and connections that apply to

MIDI data send and receive by this Digital Keyboard, see

the latest support information provided by the website at the

following URL.

http://world.casio.com/

A keyboard channel is the channel used for sending Digital

Keyboard data to a computer. You can select the channel you

want for sending Digital Keyboard data to a computer.

• The keyboard channel setting range is 01 to 16.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“MIDI” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [–] and [+] keys to change

the keyboard channel.

The navigate channels can be used to display only the notes

of a particular channel (part) as on-screen guide information

from among the note information of a tune sent from the

computer.

■Specifying the Navigate Channels

From among the 16 available channels (numbered 01 to 16),

you can specify any two neighboring channels (such as 05

and 06) as navigate channels. The smaller numbered channel

is the navigate (L) channel, while the larger numbered

channel is the navigate (R) channel. Specifying the navigate

(R) channel will automatically configure the navigate (L)

channel as well.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“MIDI” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “Navi. Ch”.

4.

Use the br (10-key) to specify the navigate (R)

channel.

This also will automatically configure the next lower

channel number as the navigate (L) channel.

CASIO USB-MIDI : For Windows Vista, Windows 7,

Windows 8, Mac OS X

USB Audio Device : For Windows XP

MIDI Settings

Keyboard Channel

M I D I

Flashes

K e

y

b d C h

Navigate Channels

N a v i . C h

CTK5200_A5_x1a_EN_ES.indd 68 2014/07/24 12:13:23

English

Connecting External Devices

E-67

■Turning Off the Navigate Channel Sound and

Playing the Part on the Keyboard

You can turn off the sound on one or both of the navigate

channels and play the cancelled part on the keyboard

yourself.

1.

Press bl to select the channel setting you want

to turn off.

Each press of bl cycles through settings (1) through (4)

described below.

• If you turn off one channel, you can play the cancelled

part on the keyboard using the same tone as the

channel you turned off. If you turn off both channels

(option (3)), what you play on the keyboard sounds

using the tone of the navigate (R) channel.

There are times when exchanging data with a computer

when you may not want the Digital Keyboard to sound notes

you play on its keyboard. The local control setting lets you do

just that.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“MIDI” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “Local”.

4.

Use the br (10-key) [–] and [+] keys to specify

the local control setting.

Enabling the Accomp Out setting causes Auto

Accompaniment data to be sent to the computer.

1.

Press ct (FUNCTION) and then use the br

(10-key) [4] (o) and [6] (p) keys to display

“MIDI” (page E-7).

2.

Press br (10-key) [9] (ENTER) key.

3.

Use the br (10-key) [4] (o) and [6] (p) keys

to display “AcompOut”.

4.

Use the br (10-key) [–] and [+] keys to turn

Accomp Out on or off.

Navigate (L)

Channel

Navigate (R)

Channel

Sound

On-

screen

Guide

Sound

On-

screen

Guide

(1) R only displayed

{××{

(2) L only displayed

×{{ ×

(3) LR displayed

×{×{

(4) LR nor displayed

{{{{

Selected channel indicator appears.

Local Control

Accomp Out

L o c a l

A c o m

p

O u t

CTK5200_A5_x1a_EN_ES.indd 69 2014/07/24 12:13:24

Connecting External Devices

E-68

You can transfer sampled sounds, recorded songs, and other

data in Digital Keyboard memory to a computer for storage.

You also can load standard MIDI file (SMF) data, and Auto

Accompaniment data you download from the CASIO website

to the Digital Keyboard, which greatly expands the Song Bank

songs and Auto Accompaniment patterns available to you.

A special Data Manager application is required in order to

transfer data to and from the Digital Keyboard.

The same types of data that you can store to or recall from a

memory card (page E-59) can be transferred to and from the

Digital Keyboard. Note, that recorded song data can be

transferred to a computer in the Digital Keyboard’s native

format only. You cannot save recorded song data to a

computer as a standard MIDI file (SMF format).

1.

Go to the CASIO WORLDWIDE site at the

following URL.

http://world.casio.com/

2.

At the site, select a geographic area or country.

3.

After accessing the area site, navigate to the

minimum computer system requirements for

Data Manager for this product.

• You should be able to find a link to Data Manager

information on the product introduction page of this

product. If you cannot find such a link, use the search

form of the area site where you are located to enter the

model name of this product and search for it.

• Note that site contents are subject to change without

notice.

4.

Check if your computer system complies with

the minimum requirements for Data Manager.

5.

Download Data Manager and its user’s guide to

your computer.

6.

Follow the procedure in the user’s guide that

you downloaded in step 5 to install and use

Data Manager.

• You can download accompaniment data from the

Internet Data Expansion system of the CASIO MUSIC

SITE (http://music.casio.com/) and load it into the

memory of this Digital Keyboard. Note that there is not

any accompaniment data intended specifically for this

model, so you should use data for other models.

• Since the accompaniment data is for other models, you

may experience some abnormalities when playing it on this

model.

• For information about accompaniment data compatibility

between models, see the Data Manager user’s guide you

download in step 5 of the above procedure.

Storing and Loading Digital

Keyboard Memory Data

Data Types Supported for Data Transfer

Downloading Data Manager

CTK5200_A5_x1a_EN_ES.indd 70 2014/07/24 12:13:24

English

Connecting External Devices

E-69

This Digital Keyboard can be connected to commercially

available stereo, amplifier, or recording equipment, to a

portable audio player or other equipment.

Connection requires commercially available connecting cords,

supplied by you. The connecting cords should have a stereo

standard plug on one end and a plug that matches the

configuration of the external device on the other end.

• Turn off the external device when making connections.

After connecting, turn down the Digital Keyboard and

external device volume levels whenever turning power

on or off.

• After connecting, turn on the Digital Keyboard and then

the external device.

• If keyboard notes sound distorted when they are

sounded from external audio equipment, lower the

Digital Keyboard’s volume setting.

Connection requires commercially available connecting

cords, supplied by you. The connecting cords should have a

stereo mini plug on one end and a plug that matches the

configuration of the external device on the other end.

• Turn off the Digital Keyboard when making

connections. After connecting, turn down the Digital

Keyboard and external device volume levels whenever

turning power on or off.

• After connecting, turn on the external device and then

the Digital Keyboard.

• If notes are distorted when they are sounded on the

external device, lower the volume setting of the

external device.

Connecting to Audio Equipment

Outputting Keyboard Notes to Audio

Equipment

Audio equipment, amplifier,

etc.

Stereo standard plug

Digital Keyboard PHONES/OUTPUT jack

Playing an External Device from the Digital

Keyboard

Portable audio player, etc.

Stereo mini plug

Digital Keyboard AUDIO IN jack

CTK5200_A5_x1a_EN_ES.indd 71 2014/07/24 12:13:24

E-70

Reference

Troubleshooting

Symptom Action

Included Accessories

I can’t find something that should be here. Carefully check inside all of the packing materials.

Power Requirements

Power will not turned on. • Check the AC adaptor or make sure that the batteries are facing

correctly (page E-9).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-9).

The display lights up momentarily but power does

not turn on when I press the power button (1).

Press 1 firmly and completely to turn on power.

The Digital Keyboard outputs a loud sound and then

suddenly powers down.

Replace the batteries with new ones or switch over to AC adaptor

power (page E-9).

The Digital Keyboard suddenly powers down after a

few minutes.

This happens when Auto Power Off (page E-10) is triggered.

Display

The display keeps going out or are flashing. Replace the batteries with new ones or switch over to AC adaptor

power (page E-9).

On-screen keyboard keys or notes remain on the

display.

A Step Up Lesson is in progress and the Digital Keyboard is waiting

for you to play the next note in the song. To stop this from happening,

cancel the lesson (page E-33).

Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.

Sound

Nothing happens when I press any keyboard key. • Adjust the volume setting (page E-10).

• Check if something is plugged into eo on the back of the Digital

Keyboard.

• If there is no sampled sound in memory, nothing will play if you

press a keyboard key while a tone in the range of 601 to 608 is

selected (page E-19).

• Turn power off and then back on to initialize all keyboard settings

(page E-10).

Nothing happens or notes do not play normally when

I play notes on the left side of the keyboard.

Press bl to disable chord input in the accompaniment keyboard area

(page E-39).

Nothing happens when I start an Auto

Accompaniment.

• With rhythms 171 to 180, nothing will sound until you play a chord

on the keyboard. Try playing a chord (page E-39).

• Check and adjust the accompaniment volume setting (page E-42).

• If there is no user rhythm stored in memory, Auto Accompaniment

will not start when you press bk while a rhythm in the range of 181

to 190 is selected (page E-45).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

Nothing happens when I start playback of a built-in

song.

• It takes a little time after you press the button until the song starts to

play. Wait for a moment for the song to start.

• Check and adjust the song volume (page E-30).

• If there is no user song stored in memory, song playback will not

start when you press bk while a song in the range of 153 to 162 is

selected (page E-30).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

CTK5200_A5_x1a_EN_ES.indd 72 2014/07/24 12:13:24

English

Reference

E-71

The metronome does not sound. • Check and adjust the accompaniment volume setting (page E-42).

• Check and adjust the song volume (page E-30).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

Notes keep sounding, without stopping. • Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-9).

Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded

exceeds the maximum polyphony value of 48 (24 for some tones).

This does not indicate malfunction.

The volume or tone setting I made has changed. • Adjust the volume setting (page E-10).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-9).

Output volume does not change even though is

change my keyboard touch.

• Change the Touch Response setting (page E-11).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

In certain keyboard ranges, the volume and tone

quality sound are slightly different from those in other

keyboard ranges.

This is due to system limitations. It does not indicate malfunction.

With some tones, octaves do not change at the far

ends of the keyboard.

This is due to system limitations. It does not indicate malfunction.

The pitch of the notes does not match other

accompanying instruments or sounds strange when

played long with other instruments.

• Check and adjust the transpose (page E-17) and tuning settings

(page E-17).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

The reverb of notes seems to change suddenly. • Check and adjust the reverb setting (page E-16).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

Operation

When I perform a skip forward or skip back

operation, the skip operation moves multiple song

measures instead of only a single measure.

While song playback is stopped or a Step Up Lesson is in progress,

skip forward and skip back operations are performed in phrase units

(page E-28).

Tone, rhythm, and other settings revert to their initial

defaults whenever you turn on the Digital Keyboard.

Though Digital Keyboard settings reset when you turn off the Digital

Keyboard, you can save setups to registration memory for instant

recall whenever you need them (page E-48).

Computer Connection

I can’t exchange data between the Digital Keyboard

and a computer.

• Check to make sure that the USB cable is connected to the Digital

Keyboard and computer, and that the device is selected correctly

with your computer’s music software settings (page E-65).

• Turn off the Digital Keyboard and then exit the music software on

your computer. Next, turn the Digital Keyboard back on and then

restart the music software on your computer.

Symptom Action

CTK5200_A5_x1a_EN_ES.indd 73 2014/07/24 12:13:24

Reference

E-72

Specifications

Model CTK-5200

Keyboard 61 standard size keys

Touch Response 2 types, Off

Maximum Polyphony 48 notes (24 for certain tones)

Tones

Built-in Tones 600

Sampling Tones Up to 8 (Melody Sampling: 5, Drum Sampling: 3)*

Up to 10 seconds

Functions Layer, Split, Piano/Organ button

Reverb 1 to 10, Off

Chorus 1 to 5, Off

Metronome

Beats per Measure 0, 2 to 6

Tempo Range 30 to 255

Song Bank

Built-in Songs 152

User Songs Up to 10*

Step Up Lesson

Lessons 4 (Listen, Watch, Remember, Auto)

Lesson Part L, R, LR

Functions Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation

Music Challenge 20 notes

Auto Accompaniment

Built-in Rhythms 180

User Rhythms Up to 10 (Accompaniment Edit)*

Chord Book Function Chord guide

Registration 32 (4 setups × 8 banks)

Recorder Real-time recording, playback

Keyboard Play 5 songs, 6 tracks

Playing Along with a

Built-in Songs 1 song (L, R, LR)

Memory Capacity Approximately 12,000 notes (total for 6 songs)

Other Functions

Transpose ±1 octaves (–12 to +12 semitones)

Octave Shift Upper/Lower ±2 octaves

Tuning A4 = 415.5 to 465.9 Hz (Initial Default: 440.0 Hz)

Preset Scales 17

Music Preset 305

One Touch Preset 180

Auto Harmonize 12 types

Arpeggiator 90 types

MIDI 16 multi-timbre received, GM Level 1 standard

Musical Information Function Tone, Rhythm, Song Bank numbers and names, staff notation, fingering, pedal operation,

tempo, measure and beat number, chord name, etc.

Pitch Bend Wheel

Pitch Bend Range 0 to 12 semitones

Memory Cards

Supported Memory Cards SD or SDHC memory cards, 32GB or less

Functions SMF playback, file storage, file recall, file delete, card format

CTK5200_A5_x1a_EN_ES.indd 74 2014/07/24 12:13:24

English

Reference

E-73

• Design and specifications are subject to change without notice.

*This data is stored in a shared memory area with a total capacity of approximately 320Kbytes (1Kbyte = 1,024bytes).

Be sure to read and observe the following operating precautions.

■Location

Avoid the following locations for this product.

• Areas exposed to direct sunlight and high humidity

• Areas subjected to temperature extremes

• Near a radio, TV, video deck, or tuner

The above devices will not cause malfunction of the product, but interference from the product can cause audio or video

interference of a nearby device.

■User Maintenance

• Never use benzine, alcohol, thinner, or other chemical agents to clean the product.

• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.

Wring all excess moisture from the cloth before wiping.

■Included and Optional Accessories

Use only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric

shock, and personal injury.

■Weld Lines

Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not

cracks or scratches.

■Musical Instrument Etiquette

Always be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the

volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using

headphones.

Inputs/Outputs

USB port TYPE B

Sustain/Assignable jack Standard jack (sustain, sostenuto, soft, rhythm)

Phones/Output jack

Stereo standard jack

Output Impedance: 140Ω, Output Voltage: 4.5V (RMS) MAX

Audio In jack Stereo mini jack

Input Impedance: 9kΩ, Input Sensitivity: 200mV

Power Jack DC9.5V

Power Supply 2-way

Batteries 6 AA-size zinc-carbon batteries or alkaline batteries

Battery Life Approximately 3 hours continuous operation on alkaline batteries

AC Adaptor AD-E95100L

• The AC adaptor can be used safely in areas up to 4,000 meters above sea level.

Auto Power Off Approximately 6 minutes (during battery operation) or 30 minutes (during AC adaptor

operation) without any operation, Auto Power Off can be disabled.

Speakers 12cm × 2 (Output: 2.5W + 2.5W)

Power Consumption 9.5V = 7.7W

Dimensions 94.8 × 35.0 × 10.3 cm (37 5/16 × 13 3/4 × 4 1/16 inch)

Weight Approximately 4.4kg (9.7 lbs) (without batteries)

Operating Precautions

CTK5200_A5_x1a_EN_ES.indd 75 2014/07/24 12:13:25

Reference

E-74

Error Messages

Display

Message Cause Action

Err CardFull There is not enough room available on the memory

card.

• Delete some of the files on the memory card to make

room for new data (page E-63).

• Use a different memory card.

Err Card R/W The memory card is damaged. Use a different memory card.

Err Convert There is not enough unused memory available to save

recorded song data to a memory card as an SMF 0

format file.

Delete some or all of the following user data from memory

to make room for new data.

Sampled sounds (page E-19), user rhythms (page E-45),

user songs (page E-30)

Err Exist A sampled drum set sound cannot be copied (page

E-23) to a keyboard key because the key already has a

sampled sound assigned to it.

• Delete the sampled sound that is currently assigned to

the key you are copying to (page E-24).

• Copy the sampled sound to another key that does not

yet have a sampled sound assigned to it.

Err Format 1. The format of the memory card is not compatible

with this Digital Keyboard.

1. Format the memory card (page E-60).

2. The memory card is damaged. 2. Use a different memory card.

3. You are trying to use an SDXC card. 3. SDXC cards are not supported. Use an SD or SDHC

memory card.

Err Limit The tone number you selected before starting sampling

already has the allowable maximum of eight sampled

sounds assigned to it.

• Delete the one or more of the sampled sounds

currently assigned to the tone number (page E-24).

• Select another tone number that has less than eight

sampled sounds currently assigned to it (page E-21).

Err Mem Full 1. There is not enough memory available to play back

song data from a memory card.

Delete some or all of the following user data from memory

to make room for new data.

Sampled sounds (page E-19), user rhythms (page E-45),

user songs (page E-30)

2. There is not enough memory available for sampling

or Auto Accompaniment editing.

Err No Card 1. The memory card is not set correctly in the card slot. 1. Remove the memory card and reinsert it correctly

(page E-60).

2. The memory card was removed part way through a

card access operation.

2. Never remove a memory card from the card slot while

a card access operation is in progress.

Err No Data There is no data in the selected user area (tone,

rhythm, song number, etc.)

Select a Digital Keyboard user area that contains data.

Err No File There is no folder named “MUSICDAT” on the memory

card.

• Use a computer to create a folder named “MUSICDAT”

on the memory card (page E-62).

• Format the memory card on the Digital Keyboard (page

E-60).

Err NotSMF01 You are attempting to play back SMF Format 2 song

data.

Playback of SMF Format 0 or 1 only is supported.

Err Protect 1. The memory card is write protected. 1. Adjust the memory card’s write protect switch to

enable data storage.

2. Sampled sounds (Tone Numbers 601 to 608) are

protected.

2. Unprotect one or more of the sampled sounds, which

will allow it to be overwritten or deleted.

Err ReadOnly You are attempting to save a file using the same name

as an existing read-only file.

• Save the new file to a different card or use another

name.

• Remove the read-only attribute of the exiting file on the

memory card and try again.

• Use a different memory card.

Err SizeOver 1. The song data on the memory it too big to play back. 1. This Digital Keyboard can play back song data files

with a maximum size of about 320Kbytes.

2. Auto Accompaniment editing cannot be performed

because the accompaniment pattern or instrument

part data is too large.

2. Select a different accompaniment pattern or

instrument parts.

Err WrongDat 1. The data on the memory card is corrupted. —

2. The data on the memory card is a type that is not

supported by this Digital Keyboard.

CTK5200_A5_x1a_EN_ES.indd 76 2014/07/24 12:13:25

English

Reference

E-75

Song List

SONG BANK

WORLD

001 TWINKLE TWINKLE LITTLE STAR

002 LIGHTLY ROW

003 LONG LONG AGO

004 ON TOP OF OLD SMOKEY

005 SAKURA SAKURA

006 WHEN THE SAINTS GO MARCHING IN

007 AMAZING GRACE

008 AULD LANG SYNE

009 COME BIRDS

010 DID YOU EVER SEE A LASSIE?

011 MICHAEL ROW THE BOAT ASHORE

012 DANNY BOY

013 MY BONNIE

014 HOME SWEET HOME

015 AURA LEE

016 HOME ON THE RANGE

017 ALOHA OE

018 SANTA LUCIA

019 FURUSATO

020 GREENSLEEVES

021 JOSHUA FOUGHT THE BATTLE OF JERICHO

022 THE MUFFIN MAN

023 LONDON BRIDGE

024 UNDER THE SPREADING CHESTNUT TREE

025 SIPPIN’ CIDER THROUGH A STRAW

026 GRANDFATHER’S CLOCK

027 ANNIE LAURIE

028 BEAUTIFUL DREAMER

029 IF YOU’RE HAPPY AND YOU KNOW IT, CLAP YOUR

HANDS

030 MY DARLING CLEMENTINE

031 LITTLE BROWN JUG

032 HOUSE OF THE RISING SUN

033 SHE WORE A YELLOW RIBBON

034 YANKEE DOODLE

035 MY OLD KENTUCKY HOME

036 SZLA DZIEWECZKA

037 TROIKA

038 WALTZING MATILDA

039 ON THE BRIDGE OF AVIGNON

040 I’VE BEEN WORKING ON THE RAILROAD

041 OH! SUSANNA

042 CAMPTOWN RACES

043 JEANNIE WITH THE LIGHT BROWN HAIR

044 TURKEY IN THE STRAW

045 JAMAICA FAREWELL

EVENT

046 SILENT NIGHT

047 WE WISH YOU A MERRY CHRISTMAS

048 JINGLE BELLS

049 JOY TO THE WORLD

050 O CHRISTMAS TREE

PIANO/CLASSICS

051 MARY HAD A LITTLE LAMB

052 LE CYGNE FROM “LE CARNAVAL DES ANIMAUX”

053 JE TE VEUX

054 SONATA op.13 “PATHÉTIQUE” 2nd Mov.

055 HEIDENRÖSLEIN

056 AIR FROM “SUITE no.3”

057 SPRING FROM “THE FOUR SEASONS”

058 HABANERA FROM “CARMEN”

059 BRINDISI FROM “LA TRAVIATA”

060 HUNGARIAN DANCES no.5

061 MINUET IN G MAJOR

062 MUSETTE IN D MAJOR

063 GAVOTTE (GOSSEC)

064 ARABESQUE (BURGMÜLLER)

065 CHOPSTICKS

066 DECK THE HALL

067 ODE TO JOY

068 AVE MARIA (GOUNOD)

069 SONATINA op.36 no.1 1st Mov.

070 PRELUDE op.28 no.7 (CHOPIN)

071 RÊVERIE

072 GYMNOPÉDIES no.1

073 GOING HOME FROM “FROM THE NEW WORLD”

074 FÜR ELISE

075 TURKISH MARCH (MOZART)

076 SONATA op.27 no.2 “MOONLIGHT” 1st Mov.

077 ETUDE op.10 no.3 “CHANSON DE L’ADIEU”

078 THE ENTERTAINER

079 WEDDING MARCH FROM “MIDSUMMER NIGHT’S

DREAM”

080 AMERICAN PATROL

081 FRÖHLICHER LANDMANN

082 LA CHEVALERESQUE

083 SONATA K.545 1st Mov.

084 LA PRIÈRE D’UNE VIERGE

085 VALSE op.64 no.1 “PETIT CHIEN”

086 LIEBESTRÄUME no.3

087 JESUS BLEIBET MEINE FREUDE

088 CANON (PACHELBEL)

089 SERENADE FROM “EINE KLEINE NACHTMUSIK”

090 MARCH FROM “THE NUTCRACKER”

091 INVENTIONEN no.1

092 PRAELUDIUM no.1 (J.S.BACH)

093 SONATINE op.20 no.1 1st Mov.

094 HUMORESKE (DVO ÁK)

095 DOLLY’S DREAMING AND AWAKENING

096 LA FILLE AUX CHEVEUX DE LIN

097 ARABESQUE no.1 (DEBUSSY)

098 TRÄUMEREI

099 MAPLE LEAF RAG

100 NOCTURNE op.9 no.2 (CHOPIN)

EXERCISE

101 - 150 EXERCISE I / II / III

DEMO TUNES

151 - 152 DEMO TUNES

USER SONGS

153 - 162 USER SONGS

CTK5200_A5_x1a_EN_ES.indd 77 2014/07/24 12:13:25

Reference

E-76

In addition to the chords that can be fingered with Fingered 1

and Fingered 2, the following chords also are recognized.

• With Fingered 3, the lowest note fingered is interpreted as

the base note. Inverted forms are not supported.

• With Full Range Chord, when the lowest note fingered is a

certain distance from the neighboring note, the chord is

interpreted as a fraction chord.

• Unlike Fingered 1, 2, and 3, Full Range Chord requires

pressing of at least three keys to form a chord.

Fingering Guide

Fingered 1, Fingered 2 Chords

*1 With Fingered 2, interpreted as Am7.

*2 With Fingered 2, interpreted as Am7b5.

*3 Inverted form not supported in some cases.

C

Cm

Cdim

Caug

*3

Csus4

*3

Csus2

*3

C7

Cmadd9

CmM7

Cdim7

*3

C69

*3

C6

*1

*3

Cm6

*2

*3

Cm7

*3

CM7

Cm7

b5

*3

C7sus4

Cadd9

C7

b5

*3

Fingered 3, Full Range Chords

C

#

C

D

C

E

C

F

C

G

C

A

b

C

B

b

C

B

C

C

#

m

C

Dm

C

Gm

C

Am

C

B

b

m

C

Ddim

C

A

b

7

C

F7

C

Fm7

C

Gm7

C

A

b

add9

C

Fm

C

      

      

CTK5200_A5_x1a_EN_ES.indd 78 2014/07/24 12:13:25

Button Number Reference

Referencia rápida para los números de botones

CTK-5200

5511 22 brbr

bnbn

66 77 88 99 bkbk bsbs btbt ckck clcl cmcmblbl

4433 bpbpbqbq bobo

cncn coco cpcp crcr cscs ctctcqcqbmbm

• Cut this page along the dashed line so you can have it on hand as you read the contents of the manual.

• Recorte esta página por la línea de puntos para tenerla a mano mientras continúa leyendo este manual.

CTK5200_A5_x1a_EN_ES.indd 155 2014/07/24 12:13:44

Function Transmitted Recognized Remarks

Basic

Channel

1

1 - 16

1 - 16

1 - 16

Default

Changed

Note

Number

0 - 127

0 - 127 *1

12 - 120

True voice

After

Touch

Control

Change

X

X

O

X

O

Pitch Bender

O

Key’s

Ch’s

Velocity

O

9nH v = 1 - 127

X

9nH v = 0, 8nH v =**

O

9nH v = 1 - 127

X

9nH v = 0

Note ON

Note OFF

Mode

Mode 3

X

Mode 3

X

Default

Messages

Altered

0, 32

1

6, 38

7

10

11

64

Bank select

Modulation

Data entry

Volume

Pan

Expression

Hold 1

Model: CTK-5200 Version : 1.0

O

X

O

O

O

X

O

*2

*3

O

O

O

O

O

O

O

(MSB only)

*2

MIDI Implementation Chart

**:no relation

**:sin relación

CTK5200_A5_x1a_EN_ES.indd 162 2014/07/24 12:13:45

Function Transmitted Recognized Remarks

Basic

Channel

1

1 - 16

1 - 16

1 - 16

Default

Changed

Note

Number

0 - 127

0 - 127 *1

12 - 120

True voice

Program

Change

O

0 - 127

O

0 - 127

:True #

After

Touch

Control

Change

X

X

O

X

O

Pitch Bender

O

System Exclusive

O

*2

O

Key’s

Ch’s

Velocity

O

9nH v = 1 - 127

X

9nH v = 0, 8nH v =**

O

9nH v = 1 - 127

X

9nH v = 0

Note ON

Note OFF

Mode

Mode 3

X

Mode 3

X

Default

Messages

Altered

System

Common

X

X

X

X

X

X

: Song Pos

: Song Sel

: Tune

Aux

Messages

Remarks

X

O

X

O

X

X

O

O

X

O

O

X

: All sound off

:

Reset all controller

: Local ON/OFF

: All notes OFF

: Active Sense

: Reset

System

Real Time

O

O

X

X

: Clock

: Commands

0, 32

1

6, 38

7

10

11

64

66

67

91

93

100, 101

Bank select

Modulation

Data entry

Volume

Pan

Expression

Hold 1

Sostenuto

Soft pedal

Reverb send

Chorus send

RPN LSB, MSB

Model: CTK-5200 Version : 1.0

Mode 1 : OMNI ON, POLY

Mode 3 : OMNI OFF, POLY

Mode 2 : OMNI ON, MONO

Mode 4 : OMNI OFF, MONO

O : Yes

X : No

O

X

O

O

O

X

O

O

O

X

O

O

*2

*3

*3

*3

*2

O

O

O

O

O

O

O

O

O

O

O

O

(MSB only)

*2

*2

*2

*1: Depends on tone.

*2: For details about NRPN, RPN, and system

exclusive messages, see MIDI Implementation at

http://world.casio.com/.

*3: In accordance with pedal effect setting.

*1: Depende del tono.

*2: Para obtener información acerca de NRPN, RPN y

los mensajes exclusivos del sistema, consulte

Implementación MIDI en http://world.casio.com/.

*3: De acuerdo con el ajuste de efecto de pedal.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

Declaration of Conformity

Model Number: CTK-5200

Trade Name: CASIO COMPUTER CO., LTD.

Responsible party: CASIO AMERICA, INC.

Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

CTK5200_A5_x1a_EN_ES.indd 2 2014/07/24 12:13:10

EN/ES

CTK5200-ES-1B

CTK-5200

USER’S GUIDE

Please keep all information for future reference.

Safety Precautions

Before trying to use the Digital Keyboard, be sure to

read the separate “Safety Precautions”.

GUÍA DEL USUARIO

Guarde toda la información para futuras consultas.

Precauciones de seguridad

Antes de intentar usar el teclado digital, asegúrese de

leer las “Precauciones de seguridad” separadas.

EnglishEspañol

MA1408-B Printed in China

K

CTK5200_A5_x1a_EN_ES.indd 1 2014/07/24 12:13:10

B