Casio Ex S3 Part 5 Users Guide

Exs3-E-5 exs3-e-5

EXS3_5 EXS3_5_EN EX-S3 | Digital Cameras | Manuals | CASIO

EX-S3 Part 5 - User's Guide exs3_e_5 Free User Guide for Casio Camera, Manual - page1

2015-08-11

: Casio Casio-Ex-S3-Part-5-Users-Guide-784235 casio-ex-s3-part-5-users-guide-784235 casio pdf

Open the PDF directly: View PDF .
Page Count: 48

Download
Open PDF In Browser	View PDF

USING A MEMORY CARD

You can expand the storage
capabilities of your camera by using
a commercially available memory
card (SD memory card or
MultiMedia Card). You can also
copy files from built-in flash
memory to a memory card and from
a memory card to flash memory.

IMPORTANT!
• Make sure you turn off the camera before inserting or
removing a memory card.
• Be sure to orient the card correctly when inserting it.
Never try to force a memory card into the slot when
you feel resistance.
• See the instructions that come with the memory card
for information about how to use it.
• Certain types of cards can slow down processing
speeds.
• SD memory cards have a write protect switch, which
you can use to protect against accidental deletion of
image data. Note, however, if you write protect an
SD memory card, you must remove write protection
whenever you want to record to it, format it, or delete
any of its files.

• Normally, files are stored in built-in flash memory. When
you insert a memory card, however, the camera
automatically stores files to the card.
• Note that you cannot save files to built-in memory while a
memory card is installed in the camera.

107

USING A MEMORY CARD
IMPORTANT!

Using a Memory Card

• Never insert any other object besides a memory card
into the camera’s card slot. Doing so creates the risk
of damage to the camera and card.
• If you are not using a memory card, be sure to insert
the dummy card into this slot to protect against dust
and damage.
• The dummy card is intended for use with this camera
only. Never insert it into the card slot of any other
type of device.
• Should water or any foreign object ever get into the
card slot, immediately turn off the camera, remove
the battery, and contact your dealer or nearest
CASIO authorized service center.
• Never remove a card from the camera while the
operation/flash charge lamp is flashing. Doing so can
cause the file save operation to fail, and even
damage the memory card.

To insert a memory card into the camera

1. Making sure that the
contacts of the memory
card are facing towards
the top of the camera,
carefully insert the card
into the slot as far as it
will go.

Contacts

To remove a memory card from the
camera

1. Press the memory card
into the camera and then
release it. This will cause
the card to come part way
out of the camera.

2. Pull the memory card out
of the slot.

108

USING A MEMORY CARD

Formatting a Memory Card

1. Load the memory card into the camera.

Formatting a memory card deletes any data already stored
on it.

2. Turn on the camera. Next, enter the REC
mode or PLAY mode and press [MENU].

IMPORTANT!

3. Select the “Set Up” tab, select “Format”, and

• Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then
using it in the camera can slow down data
processing by the camera. In the case of an SD card,
formatting on a computer can result in nonconformity with the SD format, causing problems with
compatibility, operation, etc.
• Note that data deleted by a memory card format
operation cannot be recovered. Check to make sure
you do not need any of the data on the memory card
before you format it.
• Formatting a memory card that contains files deletes
all the files, even those that are protected (page 86).

then press [왘].

4. Use [왖] and [왔] to select “Format”, and then
press [SET].
• To exit the format operation without formatting,
select “Cancel”.

109

USING A MEMORY CARD

Memory Card Precautions

Copying Files

• Use only an SD memory card or a MultiMediaCard with
this camera. Proper operation is not guaranteed when
any other type of card is used.
• Electrostatic charge, electrical noise, and other
phenomena can cause data to become corrupted or even
lost. Always make sure that you always back up important
data on other media (MO disc, computer hard disk, etc.)
• If a memory card starts to behave abnormally, you can
restore normal operation by reformatting it. However, we
recommend that you always take along more than one
memory card whenever using the camera far away from
the home or office.
• We recommend that you format a memory card before
using it for the first time after purchasing it, or whenever
the card you are using seems to be the cause of
abnormal images.
• Before starting a format operation, check to make sure
that the battery is fully charged. Power interruption during
the format operation can result in improper formatting,
and even damage the memory card and make it
unusable.

Use the procedures below to copy files between built-in
memory and a memory card.
IMPORTANT!
• Only snapshot and movie files recorded with this
camera can be copied. Other files cannot be copied.

To copy all the files in built-in memory to
a memory card

1. Load the memory card into the camera.
2. Turn on the camera. Next, enter the PLAY
mode and press [MENU].

3. Select the “PLAY” tab,
select “Copy”, and
then press [왘].

110

USING A MEMORY CARD

4. Use [왖] and [왔] to select “Built-in

4. Use [왖] and [왔] to select “Copy”, and then

Card”,

and then press [SET].

press [SET].

• This starts the copy operation and displays the
message “Busy... Please wait..”.

• After the copy operation is complete, the monitor
screen shows the last file in the folder.

• The file reappears on the monitor screen after the
copy operation is complete.
• Repeat steps 3 through 4 to copy other images, if
you want.

To copy a file from a memory card to
built-in memory

5. Press [MENU] to exit the copy operation.

With this procedure you can copy one file at a time.
NOTE
• Files are copied to the folder in built-in memory
whose name has the largest number.

1. Perform steps 1 through 3 of the procedure
under “To copy all the files in built-in memory
to a memory card”.

2. Use [왖] and [왔] to select “Card

Built-in”,

and then press [SET].

3. Use [왗] and [왘] to select the file you want to
copy.

111

VIEWING IMAGES ON A COMPUTER

After using the USB cradle to establish a USB connection
between the camera and your computer, you can use your
computer to view images in file memory and copy images
to your computer’s hard disk or other storage media. In
order to do this, you first need to install the USB driver
located on the CD-ROM that comes bundled with the
camera onto your computer.
Note that the procedure you need to perform depends on
whether you are using computer running under Windows
(see below) or a Macintosh (see page 117).

Using the Camera with a Windows
Computer
The following are the general steps for viewing and copying
files from a computer running under Windows. You can find
details about each operation in the procedures that follow
below. Note that you should also refer to the
documentation that comes with your computer for other
information about USB connections, etc.
1. If you are running Windows 98, Me, or 2000, install
the USB driver onto your computer.
• You need to perform this step only once, the first
time you connect to your computer.
• If you are running Windows XP, you do not need to
install the USB driver.
2. Use the USB cradle to establish a connection between
the camera and computer.
3. View and copy the images you want.

112

VIEWING IMAGES ON A COMPUTER

3. On the menu screen

IMPORTANT!

that appears, click the
language button in the
upper left corner of the
display, and then
select a language from
the list that appears.

• Do not try to establish a connection between the
camera and computer before installing the USB
driver onto the computer.
• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you place
it onto the USB cradle.

4. Click [USB driver] and then [Install].
1. What you should do first depends on whether

• This starts installation.

your computer is running under Windows 98/
Me/2000 or Windows XP.

• The following steps show installation under the
English version of Windows.

5. On the screen that appears after installation

■ Windows 98/Me/2000 Users

is complete, select the “Yes, I want to restart
my computer now.” check box and then click
[Finish] to restart your computer.

• Start from step 2 to install the USB driver.
• Note that the example installation presented here
uses Windows 98.
■ Windows XP Users
• Installation of the USB driver is not required, so jump
directly to step 6.

2. Set the bundled CD-ROM into the CD-ROM
drive of your computer.

113

VIEWING IMAGES ON A COMPUTER

6. Connect the bundled AC adaptor to the [DC IN

7. Connect the USB cable that comes bundled

5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.

with the camera to the USB cradle and your
computer’s USB port.

• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
USB port

USB cable
(bundled)

Connector B

Connector A

[USB]

• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable
plugs are shaped for proper positioning.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.

114

VIEWING IMAGES ON A COMPUTER

8. After making sure the camera is turned off,

9. Press the USB cradle’s [USB] button.

place the camera onto the USB cradle.

• This will cause the “Add New Hardware...” dialog box
to appear on the computer screen as the computer
automatically detects the camera’s file memory. After
you install the USB driver, “Add New Hardware...”
dialog box will no longer appear when you perform
the above steps to establish a USB connection.

• Do not place the camera onto the USB cradle while it
is turned on.

• Pressing the [USB] button enters the USB mode,
which causes the USB cradle’s [USB] lamp to light
green (page 146).

PLAY
REC
DISP

SET

• At this point, some operating systems will display a
“Removable Disk” dialog box. If your operating
system does, close the dialog box.
PHOT
O

CHAR

USB

PLAY
REC
DISP

SET

PHOT
O

CHAR

USB

[USB] button
[USB] lamp

115

VIEWING IMAGES ON A COMPUTER

10. On your computer, double-click “My

16. Depending on the version of Windows you are

Computer”.

running, use one of the following procedures
to terminate the USB connection.

11. Double-click “Removable Disk”.

■ WindowsMe/98 Users

• Your computer sees the camera’s file memory as a
removable disk.

• After pressing the USB cradle [USB] button and
making sure that the [USB] lamp is not lit, remove
the camera from the USB cradle.

12. Double-click the “Dcim” folder.

■ Windows2000/XP Users

13. Double-click the folder that contains the

• Click card services in the task tray on your computer
screen, and disable the drive number assigned to the
camera. After pressing the USB cradle [USB] button
and making sure that the [USB] lamp is not lit,
remove the camera from the USB cradle.

image you want.

14. Double-click the file that contains the image
you want to view.
• For information about file names, see “Memory
Directory Structure” on page 124.

15. To copy all the files in file memory to your
computer’s hard disk, drag the “Dcim” folder
from “Removable Disk” to the “My
Documents” folder on your computer.

116

VIEWING IMAGES ON A COMPUTER

USB Connection Precautions

Using the Camera with a Macintosh
Computer

• Be sure to read the documentation that comes with your
computer for other important information about USB
connections.
• Be sure to connect the AC adaptor to the USB cradle to
supply power to the camera.
• USB data communication is performed regardless of the
current setting of the camera’s mode selector.
• Do not leave the same image displayed on your computer
screen for a long time. Doing so can cause the image to
“burn in” on the screen.
• Never disconnect the USB cable, or perform any camera
or USB cradle operation while data communication is in
progress. Doing so can cause data to become corrupted.

The following are the general steps for viewing and copying
files from a Macintosh.
You can find details about each operation in the
procedures that follow below. Note that you should also
refer to the documentation that comes with your Macintosh
for other information about USB connections, etc.
IMPORTANT!
• This camera does not support operation with a
computer running Mac OS 8.5.1 or lower, or Mac OS X
10.0.
1. If your operating system is anything other than
Mac OS 9 or Mac OS X, install the USB driver onto
your Macintosh.
• You need to perform this step only once, the first
time you connect to your computer. If you are
running Mac OS 9 or Mac OS X, you do not need to
install the USB driver.
2. Use the USB cradle to establish a connection between
the camera and your Macintosh.
3. View and copy the images you want.

117

VIEWING IMAGES ON A COMPUTER

1. What you should do first depends on whether

IMPORTANT!

your Macintosh is running under Mac OS 8.6
or Mac OS 9/OS X.

• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you place
it onto the USB cradle.

■ Mac OS 8.6 Users
• Start from step 2 to install the USB driver.
• Note that the example installation presented here
uses Mac OS 8.6.
■ Mac OS 9/OS X Users
• Installation of the USB driver is not required, so jump
directly to step 9.
• The following steps show installation under the
English OS.

2. Set the bundled CD-ROM into the Macintosh
CD-ROM drive.

3. Double-click the hard disk that is specified as
your startup disk.

118

VIEWING IMAGES ON A COMPUTER

4. On the “Hard Disk” window that opens,

9. Connect the bundled AC adaptor to the [DC IN

double-click the “System Folder” to open it.

5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.

5. On the “System Folder” window, double-click

• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.

the “Extensions” folder to open it.

6. Double-click the “CASIO” folder and then the
“ENGLISH” folder. Next, double-click the CDROM’s “USB Driver” folder to open it.

7. On the “USB Driver” window that opens, drag
the “CASIO - USB StorageDriver” file and
“CASIO-USB StorageClassShim” file to the
“Extensions” folder window you opened
above.

8. This completes USB driver installation. After
checking the “Extensions” folder to make
sure that it contains the “CASIO-USB
StorageDriver” and “CASIO-USB
StorageClassShim” files, restart your
Macintosh.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

119

VIEWING IMAGES ON A COMPUTER

10. Connect the USB cable that comes bundled

11. After making sure the camera is turned off,

with the camera to the USB cradle and your
computer’s USB port.

USB port

USB cable
(bundled)

place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it
is turned on.

Connector B

PLAY
REC
DISP

Connector A

SET

PHOT
O

[USB]

CHAR

USB

[USB] button
[USB] lamp

• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable
plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.

120

VIEWING IMAGES ON A COMPUTER

12. Press the USB cradle’s [USB] button.

16. To copy all the files in file memory to your
Macintosh hard disk, drag the “DCIM” folder
to the folder to which you want to copy it.

• Pressing the [USB] button enters the USB mode,
which causes the USB cradle’s [USB] lamp to light
green (page 146).

17. To terminate the USB connection, drag the

13. Your Macintosh will see the camera’s file

drive icon that represents the camera to
Trash. After pressing the USB cradle [USB]
button and making sure that the [USB] lamp is
not lit, remove the camera from the USB
cradle.

memory as a drive.
• The appearance of the drive icon depends on the
Mac OS version you are using.
• After installing the USB driver, your Macintosh will
see the camera’s file memory as a drive whenever
you establish a USB connection between them.

14. Double-click the drive icon for the camera’s
file memory, the “DCIM” folder, and then the
folder that contains the image you want.

15. Double-click the file that contains the image
you want to view.
• For information about file names, see “Memory
Directory Structure” on page 124.

121

VIEWING IMAGES ON A COMPUTER

USB Connection Precautions

Operations You Can Perform from Your
Computer

The following are the operations you can perform while
there is a USB connection between your camera and
computer. See the referenced pages for more information
about each operation.
• View images in album format
.... See “Using the Album Feature” on page 127.
• Print images in album format
.... See “Using the Album Feature” on page 127.
• Automatically transfer images to your computer and
manage images
.... See “Installing the Software from the CD-ROM” on
page 134 for information about installing
Photo Loader.
• Retouch images
.... See “Installing the Software from the CD-ROM” on
page 134 for information about installing Photohands.

122

VIEWING IMAGES ON A COMPUTER
Using a Commercially Available SD Memory Card
Reader/Writer
See the user documentation that comes with the SD
memory card reader/writer for details about how to use it.

Using a Memory Card to Transfer Images
to a Computer
The procedures in this section describe how to transfer
images from the camera to your computer using a memory
card.
Using a Computer with a Built-in SD Memory Card Slot
Insert the SD memory card directly into the slot.
Using a Computer with a Built-in PC Card Slot
Use a commercially available PC card adapter (for an SD
memory card/MMC). For full details, see the user
documentation that comes with the PC card adapter and
your computer.

Using a Commercially Available PC Card Reader/Writer
and PC Card Adapter (for SD Memory Cards and
MMCs)
See the user documentation that comes with the PC card
reader/writer and PC card adapter (for an SD memory card/
MMC) for details about how to use them.

123

VIEWING IMAGES ON A COMPUTER

Memory Directory Structure

Memory Data
Images recorded with this camera and other data are
stored in memory using DCF (Design rule for Camera File
System) protocol. DCF protocol is designed to make it
easier to exchange image and other data between digital
cameras and other devices.

■ Directory Structure
<¥DCIM¥>

(DCIM Folder)
100CASIO
CIMG0001.JPG
CIMG0002.AVI

(Storage folder)
(Image file)
(Movie file)

...

DCF Protocol

101CASIO
102CASIO

(Storage folder)
(Storage folder)

...

DCF devices (digital cameras, printers, etc.) can exchange
images with each other. DCF protocol defines camera
format for image file data and the directory structure for file
memory, so images can be viewed using another
manufacturer’s DCF camera or printed on a DCF printer.

ALBUM
INDEX.HTM

(Album folder)
(Album HTML file)

...
<¥FAVORITE¥>*
CIMG0001.JPG
CIMG0002.JPG

(FAVORITE folder)
(Storage file)
(Storage file)

...

<¥MISC¥>

(DPOF file folder)
AUTPRINT.MRK

<¥SCENE¥>*

(DPOF file)

(Best Shot folder)

UEXS3001.JPE
UEXS3002.JPE

(User setup file)
(User setup file)

...

* These folders are created in built-in memory only.

124

VIEWING IMAGES ON A COMPUTER

■ Folder and File Contents

Image Files Supported by the Camera

• DCIM folder
Folder that stores all of the digital camera files

• Image files recorded with the CASIO EX-S3 Digital
Camera
• DCF protocol image files

• Storage folder
Folder for storing files created by the digital camera

Certain DCF functions may not be supported. When
displaying an image recorded on another camera model, it
may take a long time for the image to appear on the
display.

• Image file
File that contains an image recorded with the digital
camera (File Name Extension: JPG)
• Movie file
File that contains a movie recorded with the digital
camera (File Name Extension: AVI)
• Album folder
Folder that contains files used by the album function
• Album HTML file
File used by the album function
(File Name Extension: HTM)
• FAVORITE folder (Built-in memory only)
Folder that contains Favorites image files
(Image Size: 320 x 240 pixels)
• DPOF file folder
Folder that contains DPOF files
• Best Shot folder (Built-in memory only)
Folder that contains Best Shot user setup files.
• User setup files (Built-in memory only)
Files that contain Best Shot user setups

125

VIEWING IMAGES ON A COMPUTER

Built-in Memory and Memory Card
Precautions
• Note that the folder named “DCIM” is the parent (top)
folder of all the files in memory. When transferring
memory contents to a hard disk, CD-R, MO disk, or other
external storage, treat all the contents inside a DCIM
folder as a set and always keep them together. You can
change the name of the DCIM folder on your computer.
Changing the name to a date is a good way to keep track
of multiple DCIM folders. However, if you even want to
copy the folders back to the camera’s file memory, be
sure you change the name of the DCIM folder back to
“DCIM” first. The camera does not recognize any folder
name other than DCIM.
• We also strongly recommend that after transferring data
from file memory to other external storage that you
reformat the camera’s file memory and delete its contents
before using it to store more files. Remember that
formatting memory deletes all of its contents. Check to
make sure that you no longer need any of the files in
memory before you format it.

126

USING THE CAMERA WITH A COMPUTER

The album feature of the camera creates files that make it
possible for you to view images on your computer in a
photo album layout. You can also use the applications
contained on the CD-ROM that comes bundled with the
camera to automate image transfer and to retouch images.

• You can use the Web browser shown below to view or
print the contents of an album. Note that to view a movie
on a computer running Windows 2000 or 98, you need to
install DirectX.
Microsoft Internet Explorer Ver 5.5 or later

Using the Album Feature

Creating an album

The album feature creates an HTML photo album layout
that displays your images. You can use the HTML layout to
post your images on a Web page, or for printing the
images.

1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab,
select “Create Album”,
and then press [왘].

Sample layout

Album

3. Use [왖] and [왔] to select “Create”, and then
press [SET].
• This starts creation of the album, and causes the
message “Busy.... Please wait..”. to appear on the
monitor screen.
Index

Info

127

USING THE CAMERA WITH A COMPUTER
• The PLAY mode screen reappears after creation of
the album is complete.

Selecting an Album Layout
You can select from among 10 different display layouts for
an album.

• Creating an album causes a file folder named
“ALBUM”, which contains a file named “INDEX.HTM”
plus other files to be created in camera memory or
on the memory card.

1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Create Album”,

IMPORTANT!

and then press [왘].

• Never open the battery cover or remove the memory
card from the camera while an album is being
created. Doing so not only runs the risk of certain
album files being skipped, it can also result in image
data and other data in memory being corrupted.
• If memory becomes full while an album is being
created, the message “Memory Full” appears on the
monitor screen and album creation is terminated.
• Album creation will not be performed properly if the
battery goes dead while album creation is in
progress.
• You can also configure the camera to create albums
automatically (page 130). However, performing the
above procedure creates an album regardless of
whether automatic album creation is turned on or off.

3. Use [왖] and [왔] to select “Layout”.
4. Use [왗] and [왘] to select the layout you want.
• Changing the layout causes the layout sample on the
right side of the screen to change.
IMPORTANT!
• The sample layout shows the arrangement of items
and the background color. It does not show whether
the layout uses a list view or detailed view, or the
current Image Type setting.

128

USING THE CAMERA WITH A COMPUTER

Configuring Detailed Album Settings

■ Background Color

1. In the PLAY mode, press [MENU].

You can specify white, black, or gray as the color of the
album background using the procedure under “Configuring
Detailed Album Settings”.

2. Select the “PLAY” tab, select “Create Album”,
and then press [왘].

■ Album Type

3. Use [왖] and [왔] to select “Set Up”, and then

There are two album types: Normal and Index/Info.

press [왘].

Normal Type

: This type of album displays images in
accordance with the currently selected
layout.
Index/Info Type : In addition to the normal album screen,
this type of album also includes
thumbnails of images and detailed
information about each image.

4. Use [왖] and [왔] to
select the item whose
setting you want to
change, and then press
[왘].
• Details about each of the
settings are provided in
the following sections.

5. Use [왖] and [왔] to change the setting, and
then press [SET].

129

USING THE CAMERA WITH A COMPUTER

■ Image Use

■ Auto Album Creation On/Off

This setting lets you select from among three different
image uses, as described below. Select the image use that
best suits the way you plan to use the image.

This setting controls whether an album is created
automatically whenever you turn off the camera.

For this purpose:

Select this
setting:

Smaller images for album browsing, Website
thumbnails, or archiving on a CD-R or other
media, with the full-size image displayed
when a thumbnail is clicked
• This setting can be used for browsing with
the thumbnails. Clicking a thumbnail
displays a larger version for viewing or
printing.

View

Small image files only for album browsing, or
uploading to a Website, etc.
• This option displays only the small-file
images (located in the camera’s “ALBUM”
folder). Smaller files upload to the Internet
faster.
• You cannot enlarge images by clicking a
thumbnail or play movies while this image is
selected.

WEB

Printing (high resolution)
• High-resolution images take longer to
display on your computer screen.
• You cannot enlarge images by clicking a
thumbnail or play movies while this image is
selected.

To do this:

Select this option:

Turn on auto album creation

Turn off auto album creation

Off

• When auto album creation is turned on, an album is
created automatically in built-in memory or on the
memory card whenever you turn off the camera.
IMPORTANT!
• When you turn off the camera while auto album
creation is turned on, the monitor screen turns off,
but the operation/flash charge lamp continues to
flash for a few seconds to indicate that the album
creation process is being performed. Never open the
battery cover or remove the memory card while the
operation/flash charge lamp is flashing green.

130

USING THE CAMERA WITH A COMPUTER
NOTE

Viewing Album Files

• Depending on the number of images in memory, it
can take quite a bit of time to complete auto album
creation when you turn off the camera. If you do not
plan to use the album feature, we suggest that you
keep auto album creation turned off, which shortens
the amount of time the camera takes to power down
completely.

You can view and print album files using your computer’s
Web browser application.

1. Use your computer to access the data in builtin memory or on the memory card, or access
a memory card with your computer (pages
112 and 123).

2. Open the built-in memory “ALBUM” folder or
the memory card “ALBUM” folder, which is
located inside the folder named “DCIM”.

3. Use your computer’s

Index/Info Album Type

Web browser to open
the file named
“INDEX.HTM”.
• This displays a list of
folders in built-in memory
or on the memory card.
Image

131

File Name

USING THE CAMERA WITH A COMPUTER

4. If you created the album after selecting
“Normal” type or “Index/Info” as the album
type under “Configuring Detailed Album
Settings” on page 129, you can click one of
the following display options.
Album : Displays an album created by the camera.
Index : Displays a list of images stored in a folder.
Info

: Displays information about each image.

Index

• If “View” is selected for “Use” (page 130), you can
double-click an image on your computer screen to
display the full-size version.

Info
Album

132

USING THE CAMERA WITH A COMPUTER
• The following describes the information that appears
on the Info Screen.
This Info Screen item:
File Size
Resolution
Quality
Drive mode
AE
Light metering
Shutter speed
Aperture stop
Exposure comp
Focusing mode
Flash mode
Sharpness
Contrast
White balance
Sensitivity
Filter
Flash intensity
Digital zoom
World
Date
Model

NOTES
• When printing an album page, you should set up
your Web browser as described below.
— Select the browser frame where the images are
located.
— Set margins to the lowest possible values.
— Set the background color to a printable color.
• See the user documentation that came with your
Web browser application for details about printing
and configuring settings for printing.

Shows this:
Image file size
Resolution
Quality
Drive mode
Exposure mode
Metering mode
Shutter speed
Aperture stop
EV shift
Focusing mode
Flash mode
Sharpness
Contrast
White balance
Sensitivity
Filter setting
Flash intensity
Digital zoom setting
Location
Recording date and time
Camera model name

5. After you are finished viewing the album, exit
your Web browser application.

133

USING THE CAMERA WITH A COMPUTER

Saving an Album

Installing the Software from the CD-ROM

• To save an album, copy the “DCIM” folder from camera
memory or the memory card to your computer’s hard disk,
a CD-R, an MO disk, or some other storage medium.
Note that copying only the “ALBUM” folder, does not copy
image data and other necessary files.
• After copying the “DCIM” folder, do not change or delete
any of the files inside of it. Adding new images or deleting
existing images may lead to abnormal album display.
• If you plan to use a memory card again after saving its
album, first delete all of its files or format it before loading
it into the camera.
• When you have “WEB” selected for the “Use” setting, the
album shows only the smaller image files stored in the
“ALBUM” folder. Such images can be uploaded to the
Internet more quickly.

About the bundled CD-ROM
The CD-ROM that comes bundled with the camera
contains the applications described below. Installation of
these applications is optional, and you should install only
the ones you want to use.
USB Driver for Mass Storage (for Windows/Macintosh)
This is the software that makes it possible for the camera
to “talk” to your personal computer over a USB connection.
If you are using Windows XP, Mac OS 9, or Mac OS X, do
not install the USB driver from the CD-ROM. With these
operating systems, you will be able to perform USB
communication simply by connecting the camera to your
computer with the USB cable.
Photo Loader (for Windows/Macintosh)
This application loads image data saved in JPEG and AVI
format from a digital camera to your computer.
Photohands (for Windows)
This application is for retouching and printing image files.

134

USING THE CAMERA WITH A COMPUTER
Internet Explorer (for Macintosh)
This is a browser application for reading HTML files.
Images loaded by Photo Loader are stored in folders called
“Libraries”. Internet Explorer displays the contents of a
library on your computer screen.

Computer System Requirements
Computer system requirements depend on each of the
applications, as described below.

Windows

DirectX (for Windows)
This software provides an extended tool set including a
codec that allows Windows 98 and 2000 to handle movie
files recorded using a digital camera. You do not need to
install DirectX if you are running Windows XP or Me.

See the “Readme” file on the bundled CD-ROM.

Macintosh
See the “readme” file on the bundled CD-ROM.

Acrobat Reader (for Windows/Macintosh)
This is an application that lets you read PDF files. Use it to
read the user documentation for the camera, Photo Loader,
and Photohands, all of which is included on the bundled
CD-ROM.
NOTE
• See the user documentation files (PDF) on the
bundled CD-ROM for details about using Photo
Loader and Photohands. See “Viewing User
Documentation (PDF files)” on page 138 (Windows)
and page 140 (Macintosh) of this manual for more
information.

135

USING THE CAMERA WITH A COMPUTER

Getting Started

Installing Software from the CD-ROM in
Windows

Start up your computer and
insert the CD-ROM into its
CD-ROM drive. This will
automatically launch the menu
application, which displays a
menu screen on your
computer.

Use the procedures in this section to install the software
from the bundled CD-ROM to your computer.
NOTE
• If you already have one of the bundled applications
installed on your computer, check its version. If the
bundled version is newer than the one you have, you
should install the newer version.

• The menu application may not start up automatically on
some computers. If this happens, navigate to the CDROM and double-click “menu.exe” to launch the menu
application.

The CD-ROM includes the software and user
documentation for various languages. Check the CD-ROM
menu screen to see if applications and user documentation
are available for a particular language.

Selecting a Language
First select a language. Note that some software is not
available in all languages.

1. On the menu screen, click the tab for the
language you want.

136

USING THE CAMERA WITH A COMPUTER

Viewing the Contents of the “Read me”
File

Installing an Application

1. Click “Install” for the application you want to

You should always read the “Read me” file for any
application before installing it. The “Read me” file contains
information you need to know when installing the
application.

install.

2. Follow the instructions that appear on your
computer screen.

1. Click the “Read me” button for the application

IMPORTANT!

you are going to install.

• Be sure to follow the instructions carefully and
completely. If you make a mistake when installing
Photo Loader, you may not be able to browse your
existing library information and HTML files that are
created automatically by Photo Loader. In some
cases, image files may be lost.
• When using an operating system other than
Windows XP, never connect the camera to your
computer without installing the USB driver from the
CD-ROM first.

IMPORTANT!
• Before upgrading or reinstalling Photo Loader, or
before installing it onto another computer, be sure to
read the “Read me” file for information about
retaining existing libraries.

137

USING THE CAMERA WITH A COMPUTER

Viewing User Documentation (PDF Files)

User Registration

1. In the “Manual” area, click the name of the
manual you want to read.

You can perform user registration over the Internet. To do
so, of course, you need to be able to connect to the
Internet with your computer.

IMPORTANT!

1. Click the “Register” button.

• You need to have Adobe Acrobat Reader installed
on your computer to read user documentation files. If
you do not already have Adobe Acrobat Reader
installed, you can install it from the bundled CDROM.

• This starts up your Web browser and accesses the
user registration website. Follow the instructions that
appear on your computer screen to register.

2. After registering, terminate your connection
to the Internet.

Exiting the Menu Application

1. On the menu screen, click “Exit” to exit the
menu.

138

USING THE CAMERA WITH A COMPUTER

■ To install Internet Explorer and Outlook
Express

Installing Software from the CD-ROM on a
Macintosh
The CD-ROM contains applications and user
documentation in various languages in folders named for
each language: English, French, German, Spanish, Italian,
Dutch, and Chinese. Check the CD-ROM folders to find out
if applications and user documentation are available in a
particular language.
File names include one of the following codes that indicate
the language of the data contained in the file as shown
below.
English: e, French: f, German: g, Spanish: sp, Italian: i,
Dutch: du, Chinese: ct
If your language is not included in the above, use the
contents of the “English” folder.

1. Open the file named “Internet Explorer”.
2. Open the folder for the language version you
want to install, and then open the file named
“readme_casio” file.

3. Follow the instructions in the read me file to
install Internet Explorer and Outlook Express.

■ To install Photo Loader

1. Open the folder named “Photo Loader”.
2. Open the folder named “English”, and then

Installing Software

open the file named “Important”.

Use the following procedures to install the software. We
recommend that you install Internet Explorer and Outlook
Express first before installing Photo Loader and Acrobat
Reader.

3. Open the folder named “Installer”, and then
open the file named “readme”.

4. Follow the instructions in the “readme” file to
install Photo Loader.

139

USING THE CAMERA WITH A COMPUTER
IMPORTANT!

Viewing User Documentation (PDF Files)

• If you are upgrading to the new version of Photo
Loader from a previous version and you want to use
library management data and HTML files created
using the old version of Photo Loader, be sure to
read the “Important” file in the “Photo Loader” folder.
Follow the instructions in the file to use your existing
library management files. Failure to follow this
procedure correctly can result in loss or corruption of
your existing files.

To perform the following procedures, you must have
Acrobat Reader installed on your Macintosh.

1. On the bundled CD-ROM, open the folder
named “Acrobat Reader”.

2. Open the folder for the language whose
version of Acrobat Reader you want to install,
and then open the file named
“readme_casio”.

■ To install Acrobat Reader

3. Follow the instructions in the read me file to

1. On the bundled CD-ROM, open the folder

install Acrobat Reader.

named “Acrobat Reader”.

2. Open the folder for the language whose
version of Acrobat Reader you want to install,
and then open the file named
“readme_casio”.
• Follow the instructions in the read me file to install
Acrobat Reader.

140

USING THE CAMERA WITH A COMPUTER

■ To view the camera user’s guide

■ To register as a user

1. On the CD-ROM, open the “Manual” folder.

Internet registration only is supported. Visit the following
CASIO website to register:
http://world.casio.com/qv/register/

2. Open the “Digital Camera” folder, and then
open the folder for the language whose user’s
guide you want to view.

3. Open the file named “camera_xx.pdf”.
4. “xx” is the language code (English: e, French:
f, German: g, Spanish: sp, Italian: i, Dutch: du,
Chinese: ct).

■ To read the Photo Loader user’s guide

1. On the CD-ROM, open the “Manual” folder.
2. Open the “Photo Loader” folder and then
open the “English” folder.

3. Open “PhotoLoader_english”.

141

APPENDIX

Menu Reference
The following shows lists of menus that appear in the REC
mode and PLAY mode, and their settings.
• The settings that are underlined in the following table are
initial defaults.

L/R Key

REC Mode / Flash / EV shift / White Balance
/ ISO / Off

U/D Key

REC Mode / Digital Zoom / Flash / White
Balance / Self-timer / Off

● Memory tab menu

■ REC mode
● REC tab menu
REC Mode

(Snapshot) /

(Best Shot) /

Flash

(Movie)
Auto /
(Flash Off) /
(Red-eye reduction)

Self-timer
Size

10 sec / 2 sec / X3 / Off
2048 x 1536 / 1600 x 1200 / 1280 x 960 /

Quality

640 x 480
Fine / Normal / Economy

(Flash On) /

EV Shift

–2.0 / –1.7 / –1.3 / –1.0 / –0.7 / –0.3 / 0.0 /
+0.3 / +0.7 / +1.0 / +1.3 / +1.7 / +2.0

White Balance

Auto /
(Sunlight) /
(Shade) /
(Light Bulb) /
(Fluorescent) / Manual

ISO
Digital Zoom

Auto / ISO 80 / ISO 160 / ISO 320 / ISO 640
On / Off

Review

On / Off

142

REC Mode
Flash

On / Off
On / Off

White Balance
ISO

On / Off
On / Off

Digital Zoom

On / Off

APPENDIX

■ PLAY mode

● Set Up tab menu
Beep
Startup

On / Off
On (Selectable image) / Off

File No.
World Time

Continue / Reset
Home / World

● PLAY tab menu

Home time setup (city, DST, etc.)
World Time setup (city, DST, etc.)
Date Style
Adjust

YY/MM/DD / DD/MM/YY / MM/DD/YY
Time setting

Language

/ English / Français / Deutsch /
Español / Italiano / Português /
/

Auto Power Off

/
2 min / 5 min

Format
Reset

Format / Cancel
Reset / Cancel

143

Slideshow

Start / Images / Time / Interval

Calender
Favorites

–
Show / Save / Delete / Cancel

Create Album
DPOF

Create / Layout / Set Up / Cancel
Select images / All images / Cancel

Protect
Rotation

On / All Files : On / Cancel
Rotate / Cancel

Resize
Trimming
Alarm

1280 x 960 / 640 x 480 / Cancel
–
Alarm setups

Copy

Built-in

Card / Card

Built-in / Cancel

APPENDIX
● Set Up tab menu
Beep
Startup

On / Off
On (Selectable image) / Off

File No.
World Time

Continue / Reset
Home / World

Indicator Lamp Reference

Camera Indicator Lamps
The camera has two indicator lamps: an operation/flash
charge lamp and a self-timer lamp. These lamps light and
flash to indicate the current operational status of the
camera.

Home time setup (city, DST, etc.)
World Time setup (city, DST, etc.)
Date Style
Adjust

YY/MM/DD / DD/MM/YY / MM/DD/YY
Time setting

Language

/ English / Français / Deutsch /
Español / Italiano / Português /
/

Auto Power Off

/
2 min / 5 min

Format
Reset

Format / Cancel
Reset / Cancel

Operation/Flash charge lamp

MEN

PLAY
REC

DIS

SET

Self-timer lamp

* There are two lamp flash patterns.
Pattern 1 flashes once per second, while Pattern 2 flashes twice
per second. The table below explains what each flash pattern
indicates.

144

APPENDIX

■ REC Mode
Operation/Flash
Charge Lamp

■ PLAY Mode
Self-timer Lamp
Color

Operation/Flash
Meaning

Color

Status

Green
Amber

Lit
Pattern 1

Power on
Flash charging

Green
Green

Lit
Pattern 2

Monitor screen off
Storing image

Green

Pattern 1

Red

Pattern 1

Self-timer countdown
(10 to 3)

Green

Pattern 2

Red

Pattern 2

Self-timer countdown
(3 to 1)

Red
Red

Lit
Lit

Red
Red

Pattern 1
Pattern 1

Low battery alert
Monitor screen disabled

Green

Pattern 2

Powering down

Charge Lamp

Status

Memory error
Memory full

IMPORTANT!
• Never remove the memory card from the camera
while the operation/flash charge lamp is flashing.
Doing so will cause recorded images to be lost.

145

Self-timer Lamp
Color

Meaning

Color

Status

Green
Green

Lit
Pattern 2

Power on
Deleting image

Red
Red

Lit
Pattern 1

Memory error
Low battery alert

Green
Green

Pattern 2
Pattern 2

Formatting
Powering down

APPENDIX

USB Cradle Indicator Lamps
The USB cradle has two indicator lamps: a [CHARGE]
lamp and a [USB] lamp. These lamps light and flash to
indicate the current operational status of the USB cradle
and camera.
[USB] lamp

PHOT
O

CHAR
GE

USB

[CHARGE] lamp

[CHARGE] lamp
Color

Status

Red
Green

Lit
Lit

Amber
Red

Lit
Flashing

[USB] lamp
Color

Meaning

Status
Charging
Charging complete
Charge standby
Charge error

Green
Green

Lit
USB connection
Flashing Accessing memory

146

APPENDIX

Troubleshooting Guide
Symptom

Possible Cause

Power does not turn on.

1) The battery is not oriented correctly.
2) The battery is dead.

1) Orient the battery correctly (page 25).
2) Charge the battery (page 26). If the battery
goes dead soon after being charged, it means
the battery has reached the end of its life and
needs to be replaced. Purchase a separately
available NP-20 rechargeable lithium ion
battery.

Camera suddenly powers
down.

1) Auto Power Off activated (page 34).
2) The battery is dead.

1) Turn power back on.
2) Charge the battery (page 26).

Image is not recorded
when the shutter release
button is pressed.

1) The mode selector is set to “PLAY”.
2) Flash unit is being charged.
3) Memory is full.

1) Align the mode selector with “REC”.
2) Wait until the flash unit finishes charging.
3) Transfer files you want to keep to your
computer and then delete files from image
memory, or use a different memory card.

Camera powers down
during self-timer
countdown.

The battery is dead.

Charge the battery (page 26).

Recorded images are not
saved in memory.

1) Camera powers down before the save
operation is complete.
2) Removing the memory card before the save
operation is complete.

1) When the battery indicator shows
, charge
the battery as soon as possible (page 26).
2) Do not remove the memory card before the
save operation is complete.

Power Supply
Image Recording

Action

147

APPENDIX
Possible Cause

Action

Sunlight or light from another source is shining
directly into the lens during recording.

Position the camera so sunlight does not shine
directly into the lens.

Images are not displayed.

A memory card with non-DCF images recorded
with another camera is loaded in the camera.

This camera cannot display non-DCF images
recorded onto a memory card using another digital
camera.

All buttons and switches
are disabled.

Circuit problem caused by electrostatic charge,
impact, etc. while the camera was connected to
another device.

Remove the battery from the camera, reinsert it,
and then try again.

Monitor screen is off.

1) USB communication is in progress.

1) After the computer stops accessing camera file
memory, press the [USB] button on the USB
cradle. Check to make sure that the [USB] lamp
on the USB cradle is off, and then remove the
camera from the USB cradle.
2) Press [DISP] to turn on the monitor screen.

Other

Playback

Symptom
Color of the playback
image is different from the
image on the monitor
screen during recording.

2) The monitor screen is turned off (in a recording
mode).
Cannot transfer files over a
USB connection.

1) Camera is not set securely on the USB cradle.
2) USB cable is not connected securely.
3) USB driver is not installed.
4) Camera is turned off.

148

1) Check the connection between the camera and
USB cradle.
2) Check all connections.
3) Install the USB driver on your computer (pages
112, 117).
4) Press the [USB] button on the USB cradle.

APPENDIX

Display Messages
Battery is low.

The battery is dead.

Printing Error

One of the following problems occurred during
printing.
• Printer power off
• Out of paper
• Out of ink
• Printer internal error

Record Error

Image compression could not be performed during
image data storage for some reason. Record the
image again.

SYSTEM ERROR

Your camera system is corrupted. Contact your
retailer or a CASIO service center.

The card is locked.

The LOCK switch of the SD memory card is
locked. You cannot store images to or delete
images from a memory card that is locked.

The card is not
formatted.

The memory card is not formatted. Format the
memory card (page 109).

The function is not
supported for this
file.

The function you are trying to perform is not
supported for the file on which you are trying to
perform it.

There are no files.

There are no files in built-in memory or on the
memory card.

BEST SHOT memory You are attempting to register a Best Shot setup
is full.
when the “SCENE” folder already contains 999
setups.
Card ERROR

Some problem occurred with the memory card.
Turn off the camera, and remove and then reinsert
the memory card. If the same message appears,
format the memory card (page 109).
IMPORTANT!
Formatting the memory card deletes all files on
the memory card. Before formatting, try
transferring recoverable files to a computer or
some other storage device.

File could not be
saved because
battery is low.

The battery is dead, so the recorded image could
not be saved.

Folder cannot be
created.

This message appears when you try to record an
image while there are 9,999 files stored in the
999th folder. If you want to record more files,
delete files you no longer need (page 83).

Memory Full

Memory is full. If you want to record more files,
delete files you no longer need (page 83).

149

APPENDIX
There are no printing There are no DPOF settings specifying images and
images.
the number of copies of each for printing.
Set up DPOF.
Configure the required DPOF settings (page 87).
This file cannot be
played.

The image file or audio file is corrupted, or is a
type that cannot be displayed by this camera.

Specifications

Main Specifications
Product: .............................. Digital Camera

This function cannot You attempted to copy files from built-in memory to
be used.
a memory card while there is no memory card
loaded in the camera (page 110).
Can not find the file. The camera cannot find the image specified by the
slideshow “Images” setting. Specify another image
(page 77).

Model: ................................. EX-S3

■ Camera Functions
Image Files Format
Snapshots: ...................... JPEG (Exif Ver.2.2); DCF (Design rule
for Camera File system) 1.0 standard;
DPOF compliant
Movies: ............................ AVI (Motion JPEG)
Recording Media: .............. 10MB built-in Flash memory
SD Memory Card
Multimedia Card
Image Size
Snapshots: ..................... 2048
1600
1280
640
Movies: .............................. 320

150

x 1536 pixels
x 1200 pixels
x 960 pixels
x 480 pixels
x 240 pixels

APPENDIX
Approximate Memory Capacity and File sizes:

Delete: ................................. Single-file, all files (with protection)

• Snapshots
File Size
(pixels)
2048 x 1536

1600 x 1200
(UXGA)
1280 x 960
(SXGA)
640 x 480
(VGA)

Effective Pixels .................. 3.2 million
Quality

Approximate
Image File Size

Fine
Normal
Economy
Fine
Normal
Economy
Fine
Normal
Economy
Fine
Normal
Economy

1.6MB
1.2MB
630KB
1050KB
710KB
370KB
680KB
460KB
250KB
190KB
140KB
90KB

Built-in flash
memory 10MB

SD Memory
Card* 64MB

5
7
14
8
12
24
13
20
35
46
61
98

34
45
88
53
79
154
82
126
221
294
386
618

shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots

Imaging Element ................ 1/1.8-inch square pixel color CCD
(Total pixels: 3.35 million)

shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots
shots

Lens/Focal Distance ......... F4.2; f=7.1mm (equivalent to
approximately 35 for 35mm film)
Zoom: .................................. 4X digital zoom
Focusing: ........................... Fixed focal point
Approximate Focus Range
(from lens surface) ............ 80cm to ∞ (2.6´ to ∞)
Exposure Control
Light Metering: ................ Multi-pattern by CCD
Exposure: ........................ Program AE
Exposure Compensation: ... –2EV to +2EV (1/3EV units)
Shutter: ............................... CCD electronic shutter; mechanical
shutter, 1 to 1/6400 second
(Depends on REC mode and ISO
sensitivity setting being used.)

• Movies (320 x 240 pixels)
Data Size
Recording
Time

130KB/second max.
One Movie: 30 seconds maximum
Total Movie Time:
80 seconds maximum (built-in memory)
500 seconds maximum (SD 64MB memory card)*

Aperture: ............................ F4.2/fixed
White Balance: ................... Automatic, fixed (4 modes), manual
switching

* Based on Matsushita Electric Industrial Co., Ltd. products. Capacity
depends on card manufacturer.
* To determine the number of images that can be stored on a memory card of
a different capacity, multiply the capacities in the table by the appropriate
value.

Self-timer: ........................... 10 seconds, 2 seconds, Triple Selftimer

151

APPENDIX
Built-in Flash
Flash Modes: ................... AUTO, ON, OFF, Red eye reduction
Flash Range: ................... 0.8 to 2 meters (2.6' to 6.6')
(ISO Sensitivity: “Auto”)

■ Power Requirements

Recording Functions: ....... Snapshot; Best Shot; Movie

Approximate Battery Life:

Power Requirements: ....... Rechargeable lithium ion battery
(NP-20) x 1

Monitor Screen: ................. 2.0-inch TFT color LCD
84,960 pixels (354 x 240)

Continuous Recording
(Continuous Snapshot Recording)

80 minutes (480 shots)

Viewfinder: ......................... Monitor screen and optical viewfinder

Continuous Playback

120 minutes

The values noted above are approximate values until power fails at normal
temperature (25°C (77°F)). The above does not guarantee that you will be
able to achieve this level of operation. Low temperatures shorten battery life
(page 30).

Timekeeping Functions .... Built-in digital quartz clock
Date and Time: ............... Recorded with image data
Auto Calendar: ................ To 2049
World Time: ........................ City; Date; Time; Summer time;
162 cities in 32 time zones

Power Consumption: ........ DC 3.7V Approximately 3.5W
Dimensions: ....................... 89.5(W) x 57(H) x 11.7(D) mm
(3.5˝(W) x 2.2˝(H) x 0.5˝(D))
(excluding projections)

Input/Output Terminals: ... Cradle connector

Weight: ................................ Approximately 72 g (2.5 oz)
(excluding battery and accessories)
Bundled Accessories: ...... Rechargeable lithium ion battery (NP20); USB cradle (CA-22); Special AC
adaptor; USB cable; Dummy Card;
Strap; CD-ROM; Basic Reference

152

APPENDIX
■ Rechargeable Lithium Ion Battery (NP-20)

■ Special AC Adaptor (Inlet Type)

Rated Voltage: ................... 3.7 V

Power Requirement .......... 100 to 240V AC, 50/60Hz, 0.12A

Rated Capacitance: ........... 680 mAh

Output ................................. 5.3V DC, 1.0A

Operating Temperature
Range: ................................. 0°C to 40°C (32°F to 104°F)

Dimensions ........................ 48(W) x 28(H) x 66(D) mm
(1.9"(W) x 1.1"(H) x 2.6"(D))
(excluding projections and cable)

Dimensions: ....................... 33 (W) x 50 (H) x 4.7 (D) mm
(1.3˝ (W) x 2.0˝ (H) x 0.19˝ (D))

Weight ................................. Approximately 120 g (4.2 oz)

Weight: ................................ Approximately 16 g (0.56 oz)

■ Special AC Adaptor (Plug-in Type)
■ USB Cradle (CA-22)

Power Requirement .......... 100 to 240V AC, 50/60Hz, 0.12A

Input/Output Terminals .... Camera connector; USB port; AC
adaptor terminal (DC IN 5.3V)

Output ................................. 5.3V DC, 1.0A
Dimensions ........................ 47(W) x 20(H) x 72(D) mm
(1.9"(W) x 0.8"(H) x 2.8"(D))
(excluding projections and cable)

Power Consumption ......... DC 5.3V Approximately 3.4W
Dimensions ........................ 109(W) x 38.5(H) x 57(D) mm
(4.3˝(W) x 1.5˝(H) x 2.2˝(D))
(excluding projections)

Weight ................................. Approximately 110 g (3.9 oz)

Weight ................................. Approximately 61 g (2.1 oz)

153

APPENDIX
Power Supply
• Use only the special NP-20 rechargeable lithium ion battery to power this
camera. Use of any other type of battery is not supported.
• This camera does not have a separate battery for the clock. The date and
time settings of the camera are cleared whenever power is totally cut off
(from both the battery and USB cradle). Be sure to reconfigure these
settings after power is interrupted (page 38).
LCD Panel
• The LCD panel is a product of the latest LCD manufacturing technology that
provides a pixel yield of 99.99%. This means that less than 0.01% of the
total pixels are defective (they do not turn on or always remain turned on).

154

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2003:03:31 11:06:27Z
Modify Date                     : 2004:05:26 14:39:54+09:00
Page Count                      : 48
Creation Date                   : 2003:03:31 11:06:27Z
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Author                          : 
Mod Date                        : 2004:05:26 14:39:54+09:00
Metadata Date                   : 2004:05:26 14:39:54+09:00
Creator                         : 
Title                           :

EXIF Metadata provided by EXIF.tools

Casio Ex S3 Part 5 Users Guide

Exs3-E-5 exs3-e-5

EXS3_5 EXS3_5_EN EX-S3 | Digital Cameras | Manuals | CASIO

EX-S3 Part 5 - User's Guide exs3_e_5 Free User Guide for Casio Camera, Manual - page1

Navigation menu

Versions of this User Manual:

Views

Navigation