Casio Id 11S Owners Manual

ID-11S_EN ID-11S_EN ID-11S | Timepieces (Clocks) | Manuals | CASIO

: Casio Casio-Id-11S-Owners-Manual-590540 casio-id-11s-owners-manual-590540 casio pdf

Open the PDF directly: View PDF .
Page Count: 3

Operation Guide ID-11S

1

1

4

23

ID11S_esp.indd 1 2013/05/31 14:27:08

MA1306-EA

Ú

#!3)/#/-054%2#/,4$

Operation Guide ID-11S

2

xA sticker is affi xed to the glass of this clock when you purchase it. Be sure to remove the sticker before using

the clock.

xDepending on the clock model, the confi guration of your clock may differ somewhat from that shown in the

illustration.

Current time (Hour, minutes, seconds)

Day of the week

Current TemperatureDATE (month - date)

PM indicator

GENERAL GUIDE

 RESET button

Press to reset the clock after replacing the batteries.

 SET button

Use this button to cycle through setting screens.

 + / – buttons

Use these buttons to set the current time.

 °C/ °F button

Press this button to toggle the temperature unit between Celsius and Fahrenheit.

ID11S_esp.indd 1 2013/05/31 14:27:08

SETTING THE TIME

1. Press the SET button () to cycle through the setting screens as shown below.

Current Time Screen

Year Setting Screen

Month and Day Setting Screen

Contrast Setting Screen

12-hour/24-hour Setting Screen

Time Setting Screen

ID11S_esp.indd 1 2013/05/31 14:27:08

Operation Guide ID-11S

3

2. While the screen you want is on the display, use the + and – buttons () to change the digits that are

fl ashing.

Press – to decrease the fl ashing digits.

Press + to increase the fl ashing digits.

xHolding down + or – changes the fl ashing digits at high speed.

xYou can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance

with the date setting.

xPressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00.

xEach press of + or – while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour

and 24-hour timekeeping.

xYou can set the contrast level in the range of 1 to 10.

3. After making the settings you want, use the SET button () to display the Current Time Screen.

xThe clock automatically returns to the Current Time Screen if you leave a setting screen on the display for

about three minutes without performing any operation.

THERMOMETER FUNCTIONS

xA built-in sensor measures temperature and shows the measured value on the display.

xThe temperature display shows “LO” for temperatures below –19.9°C (–3.8°F) and “HI” for temperatures above

49.9°C (121.8°F).

xThough temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such

readings are actually outside the guaranteed temperature range of this clock.

Switching between Celsius and Fahrenheit

xPush the °C/ °F button () to select either Celsius (°C) or Fahrenheit (°F).

# &

°C/ °F button ()

BATTERY REPLACEMENT

xReplace batteries whenever the display of the clock becomes dim and diffi cult to read.

1. Open the battery compartment cover as shown in the illustration.

2. Remove both of the old batteries.

3. Load two new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions.

Ifyou load batteries incorrectly, they can burst and damage the clock.

4. Replace the battery compartment cover.

5. Press the RESET button (). Be sure to press the RESET button () after replacing batteries.

ID11S_esp.indd 1 2013/05/31 14:27:08

Battery precautions

xKeep batteries out of the reach of small children. If a battery is accidentally swallowed, contact a physician

immediately.

xBe sure to load the batteries with their positive (+) and negative (–) ends facing correctly.

xNever mix old and new batteries, or batteries of different brands.

xNever charge the batteries that come with the product.

xShould batteries ever leak while in the product, wipe out the fl uid with a cloth, taking care not to let any get

onto your skin.

xReplace the batteries at least once a year, even if the current batteries are working properly.

xThe batteries that come with the product lose some of their power during transport and storage.

SPECIFICATIONS

Accuracy at Normal Temperature: ±60 seconds a month

Calendar System: Auto-calendar pre-programmed from the year 2000 to 2099

Thermometer Functions: Measuring range: –19.9°C to 49.9°C (–3.8°F to 121.8°F)

Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that

such readings are actually outside the guaranteed temperature range of this clock.

Temperature Sensor Precision: ±2°C (±4°F) in range of 0°C to 40°C (32°F to 104°F)

Battery Life: Approximately 1 year

Battery: Two AA size batteries (Type: R6P)

Ambient Temperature Range: 0°C to 40°C (32°F to 104°F)

ID11S_esp.indd 1 2013/05/31 14:27:08