Casio Lw201 1Av Operation Manual QW 2898

: Casio Casio-Lw201-1Av-Operation-Manual-119398 casio-lw201-1av-operation-manual-119398 casio pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

MA0409-EA

Operation Guide 2898
About This Manual
(Light)

• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.

General Guide
• Press B to change from mode to mode.
• In any mode, press L to illuminate the display.
Timekeeping Mode

Alarm Mode

Press

Stopwatch Mode

.

Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.

PM indicator

To turn the Daily Alarm and Hourly Time Signal on and off
In the Alarm Mode, press C to cycle through the on and
off settings as shown below.
Alarm On Indicator/Hourly Time Signal On Indicator

Day of week
Month – Day

Seconds
Hour : Minutes

To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press B to move the flashing in the sequence shown
below to select other settings.
Seconds
Day of week

Hour
Day

Hourly time signal
on indicator
Alarm on indicator

Minutes
Month

Year

3. When the setting you want to change is flashing, press C to change it as
described below.
To change this setting
Seconds
Hour, Minutes, Year, Month,
Day, Day of week

Perform this button operation
Press C to reset to 00.
Press C to increase the setting.
Holding down C changes the setting at high speed.

Mode indicator
1/100 second

Seconds

Hours

Hourly Time
Signal only

• The alarm on (ALM) indicator flashes while the alarm is
sounding.
• The alarm on (ALM) indicator and Hourly Time Signal
on (SIG) indicator are displayed in all modes.

The stopwatch lets you measure elapsed time, split times,
and two finishes.
• The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
• The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
• Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing B.

Elapsed time
Start

Stop

Re-start

Stop

Clear

Split
(SPL displayed)

Split release

Stop

Clear

Split

Stop

Split release

Clear

First runner
finishes.
Display time of
first runner.

Second runner
finishes.

Display time of
second runner.

Split time
Start

Mode indicator

Daily alarm
only

To measure times with the stopwatch

Alarm
When the daily alarm is turned on, the alarm tone sounds
when the alarm time is reached.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
• All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing B.

Both off

Stopwatch

Minutes

To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press C to toggle between 12-hour timekeeping and
24-hour timekeeping.
• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59. The 24
indicator is on the display while 24-hour format is selected.
• The P and 24 indicators are not displayed with the Timekeeping Mode time on the
Alarm Mode and Dual Time Mode screens.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.

Both on

To test the alarm
In the Alarm Mode, hold down C to sound the alarm.

• Pressing C while the seconds are in the range of 30 to 59 resets them to 00 and
adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
4. Press A to exit the setting screen.
• The year can be set in the range of 2000 to 2099.
• The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.

Timekeeping Mode time
(Hour : Minutes)

Dual Time Mode

Two Finishes
Start

Alarm Operation
The alarm tone sounds at the preset time for 10 seconds,
regardless of the mode the watch is in.
Alarm time
(Hour : Minutes)

To set an alarm time
1. In the Alarm Mode, hold down A until the hour setting
starts to flash, which indicates the setting screen.
• This operation automatically turns on the alarm.
2. Press B to move the flashing between the hour and
minutes.
3. While a setting is flashing, use C to increase it.
Holding down C changes the setting at high speed.
• With the 12-hour format, set the time correctly as a.m.
(no indicator) or p.m. (P indicator).
4. Press A to exit the setting screen.

Dual Time
The Dual Time Mode lets you keep track of time in a different time zone.
• In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the Timekeeping Mode.
Timekeeping Mode time
(Hour : Minutes)
Mode indicator

Seconds

To stop the alarm tone after it starts to sound
Press any button.

To set the Dual Time
1. Press B to enter the Dual Time Mode.
2. Hold down A until the hour setting starts to flash,
which indicates the setting screen.
3. Press B to move the flashing between the hour and
minutes settings.
4. Press C to increase the setting. Holding down C
changes the setting at high speed.
5. Press A to exit the setting screen.

Hour : Minutes

1

Operation Guide 2898
Illumination
The display of the watch is illluminated by an LED (lightemitting diode) and a light guide panel for easy reading in
the dark.
• You can specify 1.5 seconds or 3 seconds as the
illumination duration.
• See “Illumination Precautions” for other important
information about using illumination.
indicator

To illuminate the display
In any mode, press L to illuminate the display.
To specify the illumination duration
In the Timekeeping Mode, hold down C for about two seconds to toggle the
illumination duration between 3 seconds (
indicator displayed) and 1.5 seconds
(
indicator not displayed).
• Pressing C also toggles between 12-hour and 24-hour timekeeping.
• The
indicator is displayed in all modes when the illumination duration setting is
three seconds.
• To protect against running down the watch’s battery, the watch automatically
switches to the 1.5-second setting about seven hours after the 3-second setting is
selected. To continue to use the 3-second setting, perform the above procedure
again.

Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.

Auto return features
If you do not perform any operation for one or two minutes when a setting screen is
displayed, the watch will automatically exit the setting screen.

Illumination Precautions

• Illumination may be hard to see when viewed under direct sunlight.
• Illumination automatically turns off whenever an alarm sounds.
• Frequent use of illumination runs down the battery.

2



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Author                          : CASIO COMPUTER CO., LTD.
Create Date                     : 2004:08:25 15:13:00Z
Keywords                        : PDF, Manual
Modify Date                     : 2014:12:07 12:55:57+08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : CASIO COMPUTER CO., LTD.
Description                     : 
Title                           : QW-2898
Creator Tool                    : Adobe PageMaker 6.52
Metadata Date                   : 2014:12:07 12:55:57+08:00
Producer                        : Acrobat Distiller 4.0 for Macintosh
Document ID                     : uuid:412dc52f-7d11-b34e-bd49-6c26019b0e2c
Instance ID                     : uuid:cb51a7b6-1d8e-004a-bb72-387a1d03f34a
Page Layout                     : OneColumn
Page Mode                       : UseOutlines
Page Count                      : 2

EXIF Metadata provided by EXIF.tools