Casio Qv 300 Owners Manual

Casio-Qv-300-Users-Manual-770379 casio-qv-300-users-manual-770379

Qv300 qv300

User manual qv300 Casio QV-300 Digital Camera User Manuals and Instruction Guides

QV 300 to the manual 7ad9c77f-cfa7-40ff-be28-f95a969ea8b9

QV300 QV300_EN QV-300 | Digital Cameras | Manuals | CASIO

2015-08-11

: Casio Casio-Qv-300-Owners-Manual-784418 casio-qv-300-owners-manual-784418 casio pdf

Open the PDF directly: View PDF .
Page Count: 17

Download
Open PDF In Browser	View PDF

Introduction
Liquid Crystal Digital Camera

Congratulations upon your selection of the QV-300 Liquid Crystal
Digital Camera. The QV-300 comes with its own built-in liquid crystal
color monitor that let’s you instantly view the pictures you take.

QV-300
Owner's Manual

To get the most out of the QV-300, be sure to carefully read this
manual and follow the instructions contained in it.

If you need help
with your camera,
please call:
1(800)435-7732

英

Contents
Precautions .......................................................... 5

Using the Zoom Function ....................................................
Using Auto Play ..................................................................
Protecting Memory Pages ..................................................
Unprotecting Memory Pages ..............................................
Hiding Protected Memory Pages ........................................

Unpacking ............................................................. 9
General Guide .................................................... 10
Top and Display ..................................................................
Lens ....................................................................................
Bottom ................................................................................
Terminals ............................................................................

10
10
11
11

36
38
41
43
45

Deleting Memory Pages .................................... 46
Deleting Images From Memory .......................................... 46

Resolution Conversion ...................................... 50

Power Supply ..................................................... 13
To load batteries ................................................................. 13
Using AC Power ................................................................. 17

Connecting to Other Devices ............................ 51

Recording Images .............................................. 19

Using the Camera with a Connected Device ... 52

To record an image .............................................................
How to avoid hand movement… .........................................
Fluorescent Lighting ...........................................................
Infrared Light .......................................................................
Shooting Images Outdoors .................................................
Changing the Lens Orientation ...........................................
NORMAL/MACRO Switch ..................................................
Switching Between Lenses .................................................
Resolution Modes ...............................................................
Exposure Adjustment ..........................................................
Changing the Aperture Setting ...........................................
Record Mode Displays ........................................................
Using the Self-Timer ...........................................................

Troubleshooting ................................................. 59

The camera terminals ......................................................... 51

19
21
21
22
22
22
24
24
25
25
27
27
30

Specifications ..................................................... 65
About the camera’s backlight… ....................... 66

• CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss resulting from the use of this manual.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any
loss or claims by third parties which may arise through the use of
the QV-300.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all important data on other media to protect against its loss.

Playing Back Images ......................................... 31
Displaying Images on the Camera’s LCD ...........................
Displaying Images on a TV Screen ....................................
Page Status Indicators ........................................................
Producing a Multi-Page Display ..........................................

31
32
33
34
3

Precautions

Liquid Crystal Digital Camera

General Precautions

• Never use the unit inside of an air craft or in any other areas where
its use is prohibited. Doing so can result in an accident.

Be sure to observe the following important precautions whenever using the QV-300.

• Physical damage and malfunction of this unit can cause the image
data stored in its memory to be deleted. Be sure to always keep
backup copies of data by transferring them to personal computer
memory.

All references in this manual to “this camera” and “the camera” refer
to the CASIO QV-300 Digital Camera.
• Never try to take pictures or use the built-in display while operating
a motor vehicle or while walking. Doing so creates the danger of
serious accident.

• Never open the battery compartment cover, disconnect the AC
adaptor from the camera or unplug it from the wall socket while the
“WAIT” message is on the LCD. Doing so will not only make storage
of the current image impossible, it can also corrupt other image data
already stored in camera memory.

• Never try to open the case of the camera or attempt your own repairs. High-voltage internal components create the risk of electrical
shock when exposed. Always leave maintenance and repair work
up to authorized CASIO service providers.

MEMORY ERROR message

• Keep the camera away from water and other liquids, and never let it
get wet. Moisture creates the danger of fire and electrical shock.
Never use the camera outdoors in the rain or snow, at the seashore
or beach, in the bathroom, etc.

Any of the following can cause data stored in the camera’s memory to
become corrupted.
• Removal of batteries or disconnection of the AC adaptor during a
record or data communication operation

• Should foreign matter or water ever get into the unit, immediately
turn power off, unplug the AC adaptor from the power outlet, and
contact your dealer or nearest CASIO service provider. Using the
unit under these conditions creates the danger of fire and electrical
shock.

• Disconnection of the connecting cable during data communication
• Continued use while battery power is low
• Other incorrect operation
In each of the above cases, one of the memory error messages
(MEMORY ERROR #1 ~ MEMORY ERROR #4) appears, and further
operation of the camera will become impossible. If this should
happen, contact your dealer or the nearest CASIO service provider
as soon as possible.

• Should you ever notice smoke or a strange odor coming out of the
unit, immediately turn power off and unplug the AC adaptor from the
power outlet. Using the unit under these conditions creates the danger of fire and electrical shock. After making sure there is no more
smoke coming from the unit, take it to your nearest CASIO service
provider for repair. Never attempt your own maintenance.
• If the unit’s case should ever become cracked due to dropping it or
otherwise subjecting it to rough treatment, immediately turn power
off, unplug the AC adaptor from the power outlet, and contact your
nearest CASIO service provider.

Precautions

Liquid Crystal Digital Camera

Operating conditions

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF
THIS UNIT IN THE U.S.A. (not applicable to other areas).

• This camera is designed for use in temperatures ranging from 0°C
to 40°C (32°F to 104°F).

NOTICE

• Do not use or keep the camera in the following areas.

This equipment has been tested and found to comply with the limits for a Class B peripheral, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:

— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject to temperature extremes
— Inside of a closed vehicle, especially one parked in the sun
— In areas subject to strong vibration

Condensation
• When you bring the camera indoors on a cold day or otherwise expose it to a sudden change of temperature, there is the possibility
that condensation can form on the exterior or on interior components. Condensation can cause malfunction of the camera, so you
should avoid exposing it to conditions that might cause condensation.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

• To keep condensation from forming, place the camera into a plastic
bag before moving it into a location that is much warmer or colder
than your current location. Leave it in the plastic bag until the air
inside the bag has a chance to reach the same temperature as the
new location. If condensation does form, remove the batteries from
the camera and leave the battery compartment cover open for a few
hours.

• Consult the dealer or an experienced radio/TV technician for
help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
Properly shielded cables with ferrite core must be used for connection to host computer and/or peripherals in order to meet FCC
emission limits.
THE SPECIAL VIDEO CABLE THAT COMES WITH THE CAMERA ----- THE CAMERA TO A VIDEO IN TERMINAL OF A COMPUTER
THE SPECIAL CONNECTION CABLE THAT COMES WITH QV-Link SOFTWARE ----- THE CAMERA TO A PROPER TERMINAL OF A COMPUTER

Unpacking

General
Guide
Getting
Acquainted

Check to make sure that all of the items shown below are included
with your camera. If something is missing, contact your dealer as
soon as possible.

The following illustrations show the names of each component, button and switch on the camera.

Top and Display
EFFECT button

DISP (Display)
button

/PROTECT
(Timer/Protect)
button

Soft case

MODE button
DEL (Delete) button
Shutter button

[+] (Forward)
button

Aperture
switch

Camera
Alkaline batteries (AA-size × 4)

NORMAL/
MACRO
switch

LCD

POWER switch

[–] (Reverse)
button
Function switch

Cleaning Cloth

Lens

Manual

TELE(telephoto)/
WIDE(Wide-angle) switch

Wrist Strap

Video cable

Lens

Getting Acquainted

General Guide

Bottom

Connecting the Wrist Strap

Tripod
hole

Pass the wrist strap through the hole on
the side of the camera as shown in the
illustration.

Battery
compartment
lock

Battery compartment cover
BRIGHT (brightness) control
• BRIGHT control adjusts the brightness of the image on the LCD.
The brightness is set at the factory to the optimum setting, and normally does not need adjustment.

Using the Cleaning Cloth

Terminals

Use the cleaning cloth to wipe fingerprints and smudges from the LCD and
lens.

Terminal panel cover
VIDEO OUT terminal

• Be sure to avoid applying too much
pressure when wiping the LCD. Too
much pressure can cause permanent
discoloration, abnormal images, and
cracks.

DIGITAL
terminal
AC Power terminal

Using the Soft Case

Opening the Terminal Panel Cover

Keep the camera in its soft case to protect it when not in use.

Important!
Make sure that the terminal panel cover is slid fully away as shown in
step 2 above before trying to raise it. Forcing the cover up can seriously damage it.
11

Power Supply

Getting Acquainted

Battery Handling Precautions

The camera features a two-way power supply that lets you use either
batteries (AA-size Alkaline or Lithium) or household AC current.

Incorrect use or handling of batteries can cause them to leak or burst
and seriously damage your camera. Be sure to note the following
important precautions to avoid problems with batteries.

To load batteries
Be sure that camera power is turned off whenever loading or replacing batteries.
2
1. Slide the battery compartment
lock on the bottom of the camera
in the direction indicated by arrow
1
1 , and swing open the battery
compartment cover as indicated
by arrow 2.

Caution

Insert four batteries and close the
battery compartment cover.
A

• Use only LR6 (AM-3) type alkaline or
FR6 type lithium dry cell batteries
with this camera. Never mix old batteries with new ones. Failure to do so
can result in bursting or leaking of
batteries, creating the danger of fire
or personal injury.
• Always make sure that the positive
[+] and negative [–] ends of the batteries are facing correctly, as noted
by the markings on the camera itself.
Improper loading of batteries can result in bursting or leaking of batteries,
creating the danger of personal injury
or soiling of objects nearby.

• Remove batteries from the camera if you do not plan to use it for
more than two weeks.
• Never recharge batteries, never allow direct connection between
two ends of a battery, and never try to take batteries apart.
Be sure to use Alkaline or Lithium batteries. Never use
manganese batteries (see precautions on the next page).
•

Make sure that the positive + and negative - ends of the
batteries are facing correctly.

•

Press down on the battery compartment cover at the point
marked A in the above illustration until the cover locks into
place with a click.

• Do not expose batteries to direct heat or dispose of them by burning. Doing so can create the danger of explosion.
• Never mix batteries of different types.

Getting Acquainted

Power Supply

Flash Memory

• Dead batteries are susceptible to leakage, which can cause serious
damage to your camera. Remove batteries from the camera as
soon as you notice they are dead.

The camera features flash memory for storage of images. Flash
memory does not require electrical power to store data, so image
data is retained in memory even when you turn camera power off. If
batteries go dead, simply load a set of new batteries or connect the
AC adaptor and you will be able to view images in camera memory.

• The batteries that power this camera normally become warm when
they lose power. This does not indicate malfunction.

Standard Battery Life
Auto Power Off

The battery life reference values given below indicate the amount of
time at standard temperature (25°C) until power automatically turns
off due to battery failure. They do not guarantee that batteries will
perform the amount of service indicated. Battery life is reduced by low
temperatures and continued use.

Power automatically turns off whenever you do not perform any camera operation for a period of time. Power turns off after about two
minutes in the Record Mode or after about five minutes in the Playback Mode.
• To restore power, simply slide the POWER switch to the right as
you normally do.

LR6 (AM3) AA-size alkaline batteries
Approximately 130 minutes continuous operation
Recording for about 96 images (one image per minute)
FR6 AA-size lithium batteries
Approximately 220 minutes continuous operation
Recording for about 180 images (one image per minute)

Important!

Low Battery Indicator

The Auto Power Off function does not operate under the following
conditions.

The low battery indicator (
) appears in the center of the LCD
whenever remaining battery power drops below a certain level. It tells
you that power will soon turn off automatically if you continue using
the camera without replacing batteries. Be sure to replace all four
batteries with a fresh set of new ones.

• During Auto Play (page 38)
• When operations are being performed on a computer connected to
the camera via the camera’s DIGITAL terminal.
• Whenever the AC adaptor is connected to the camera.

Power Supply

Getting Acquainted

Using AC Power
To power the camera from standard AC power, use the optional AC
adaptor (AD-C60).
AC power terminal

Caution

AC adaptor

AC outlet

Caution

• Be sure to switch power off before connecting or disconnecting the
adaptor.
• Always turn camera power off before disconnecting the AC adaptor,
even if the camera has batteries installed. If you don't, the camera
will turn off automatically when you disconnect the AC adaptor.
Even so, you run the risk of damaging the camera whenever you
disconnect the AC adaptor without first turning power off.

AC Adaptor precautions
• Never use an electrical outlet whose
voltage is outside the rating marked
on the camera. Doing so can create
the danger of fire or electrical shock.
Use only the optional AC adaptor
specified for this camera.
• Should the cord of the AC adaptor
become damaged (exposed internal
wiring or shorts), request a replacement from an authorized CASIO
service provider. A damaged AC
adaptor cord creates the danger of
fire or electrical shock.

• The AC adaptor may become warm to the touch after extended periods of use. This is normal and is not cause for alarm.
• After use turn off the power switch of the camera and unplug adaptor from the AC outlet.

Recording Images

Operation

Recording Images

The following procedure provides the basic steps for recording an
image.

To record an image

Use MODE to enter the resolution mode (FINE or NORMAL)
you want.
•

Each press of MODE toggles between the Normal Mode
and Fine Mode.

•

Note that the number of images that can be stored in
memory is different depending on whether images are
saved in the Normal Mode or Fine Mode. See “Resolution
Modes” on page 25 for details.

REC

Enter the Record Mode.
•

• Always be sure to use the AD-C60
AC adaptor only. Using any other AC
adaptor can cause damage to the
camera not covered by the warranty.
• When unplugging the AC adaptor
from the wall socket, be sure to
grasp the adaptor (not the cord).
• Avoid an undue bending, pulling,
and twisting of the AC adaptor's
cord, and never try to lengthen the
cord by splicing it with other wire.

Slide the function switch to the
REC position.

PLAY

Turn on the camera.

5. Record the image.

•

Slide the POWER switch in the direction indicated by the arrow.

•

The POWER switch automatically
slides back to its original position
when you release it.

•

When power comes on, the image of the object that is in
front of the camera’s lens appears on the LCD.

It is best to look at the LCD directly, and not from an angle.

•

You can perform steps 1 and 2 in either order (1 then 2, or 2
then 1).

Take care that your finger is not
blocking the lens.

•

Should the lens become dirty, use
the cloth that comes with the camera to clean it off.

•

When the image is situated on the LCD as you want it, press
the shutter button.

•

Press the shutter button lightly to avoid moving the camera.
See page 21 for information on how to avoid hand movement.

•

The message “WAIT” appears on the LCD for about six seconds along with the image that was recorded when you
pressed the shutter button. You can use the camera to take
the next picture after the “WAIT” message disappears.

•

Here you could change the function switch to the PLAY position and view the image you just recorded.

•

Set the NORMAL/MACRO switch to the NORMAL position.
•

If the object whose image you are
recording is about 10 centimeters
from the lens (about 4 inches), set
the TELE/WIDE switch to WIDE
and the NORMAL/MACRO switch
to MACRO. See page 24 for
details on using this switch.

MACRO

NORMAL

Note
• The camera is designed to refresh the image on the LCD about
seven times per second. Because of this, you may experience a
feeling of jerkiness in the changing image if you move the camera
quickly. This is normal and does not indicate malfunction.
19

Compose the image you want to
record while viewing it on the
LCD.

REC

MACRO

NORMAL

PLAY

Recording Images

Operation

Caution
• Never open the battery compartment cover, disconnect the
AC adaptor from the camera or unplug it from the wall
socket while the “WAIT” message is on the LCD. Doing so
will not only make storage of the current image impossible, it
can also corrupt other image data already stored in camera
memory.

Infrared Light
Infrared light generated by a flash or other source can create image
color problems, such as red areas being recorded as green. Such
color problems will show up in the LCD while you are composing the
image.

Shooting Images Outdoors
Strong direct or reflected sunlight can cause recorded images to take
on a greenish tinge. This is due to the characteristics of the camera’s
charge-coupled device (CCD), and it does not indicate malfunction of
the camera. One way you can try to minimize this problem is to set
the aperture to [●] (F8).

How to avoid hand movement…
Any hand movement when you press the shutter button can causes
blurring of the recorded image. Note the following points on avoiding
hand movement.
• Make sure there is no excessive movement of the image of the object on the LCD.

Changing the Lens Orientation

• Use a tripod whenever possible when recording images in dim lighting. The camera automatically adjusts shutter speed in accordance
with the brightness of the object whose image is being recorded.
Shutter speed is quite slow for dimly lit objects, increasing the possibility of blurring caused by hand movement.

The lens of the camera is built into a lens body that is designed to
rotate. This means you can change the angle of the lens without moving the rest of the camera.

Fluorescent Lighting
Fluorescent lighting actually flickers at a frequency that cannot be
detected by the human eye. When using the camera indoors under
such lighting, you may experience some brightness or color problems
with recorded images. The actual extent of the problems depends on
what cycle of the fluorescent light’s flicker is occurring when the camera’s shutter actually releases. For best results, use a commercially
available video lights.

Rotates up to 90°
towards the front

Rotates up to 180°
towards the back

Operation

Recording Images

NORMAL/MACRO Switch

• Any images recorded while the lens body is rotated so the lens is
pointed from the back of the camera are stored as mirror images of
the image that appears in the LCD before the shutter button is
pressed.

The NORMAL/MACRO switch tells the
camera how much distance there will be
between the lens and the object whose
image you are recording. The following
table describes the conditions covered by
each switch setting.

MACRO

NORMAL

Switching Between Lenses
This camera gives you a choice between
telephoto (TELE) and wide-angle (WIDE)
lenses. The following shows the optimum
distances at which you should use each of
these lenses.

A ....... LCD when shutter button is

WIDE

Distances

pressed (in the Record Mode)
B ....... LCD when image is played

TELE

Lens

Aperture

Normal

Macro

(NORMAL)

(MACRO)

F2.6(○)

0.6m ~ ∞
(2' ~ ∞)

9cm ~ 11cm
(3.5" ~ 4.3")

F8 (●)

0.3m ~ ∞
(1' ~ ∞)

7cm ~ 14cm
(2.8" ~ 5.5")

F2.6(○)

3.4m ~ ∞
(11.2' ~ ∞)

52cm ~ 62cm
(1.7' ~ 2')

F8 (●)

1.7m ~ ∞
(5.6' ~ ∞)

44cm ~ 77cm
(1.4' ~ 2.5')

back from camera memory

Wide Angle (WIDE)
f = 4.9mm

Important!
• Do not apply excessive force when rotating the lens body. Doing so
can cause serious damage to the lens.

Telephoto (TELE)
f = 11.0mm

• Do not carry the camera or move it around while holding onto only
the lens body.
• Return the lens body to its normal position (with the lens pointing
from the front of the camera) before storing the camera.

* See page 27 for information on changing the aperture.

Recording Images

Operation

Resolution Modes

In addition to a Normal Mode, this camera also has a Fine Mode for
saving images using higher resolution. Use the MODE button to
switch between the Normal Mode and Fine Mode.
The following table shows how many images can be stored in
memory using each resolution mode.
Resolution
Mode

Use the [+] and [–] buttons to manually adjust the exposure.
•

Pressing [+] makes the image on the LCD brighter. Use it to
adjust for dim indoor lighting and backlighting.

•

Pressing [–] makes the image on the LCD darker. Use it to
adjust for bright sunlight.

[+]

Number of Images

Indicator

FINE

64 (approximately 480-kbit compressed)

NORMAL

192 (approximately 160-kbit compressed)

+–
[–]

• You can switch between resolution modes at any time before recording an image.

+–

Exposure Adjustment

This camera features an automatic exposure (AE) function that automatically changes the shutter speed in accordance with lighting. In
addition, you can also manually adjust the exposure to compensate
for backlighting, indirect indoor lighting, dark backgrounds, and other
special conditions.

Notes
• Exposure adjustment is generally expressed in terms of an exposure adjustment value. The exposure adjustment value is always
set to zero whenever you turn on the camera.

To manually adjust the exposure

• The exposure adjustment value is changed by 0.25 with each press
of [+] or [–]. The range of the value is -2 to +2.

Enter the Record Mode.
•

After adjusting the exposure, press the shutter button to
record the image.

• The exposure adjustment value automatically reverts to zero whenever the shutter button is pressed. You can manually reset the exposure adjustment value by using [+] and [–] to change the value
back to zero, which is indicated when the +/– indicator disappears
from the monitor.

Set the function switch to the REC position.

Operation

Recording Images

Changing the Aperture Setting

Remaining Pages/Resolution Mode Indicator

There are two aperture settings you can use to match lighting conditions. Use the aperture switch to change the aperture setting.

Pressing DISP in the Record Mode displays a value that shows how
many memory pages are available for recording images, along with
the current resolution mode setting (FINE or NORMAL).

• Use the [●] (F8) setting to decrease exposure. This setting works best outdoors.
• Use the [○] (F2.6) setting to increase exposure. This setting works best indoor and
with back lit images.

Enter the Record Mode.
•

MACRO

NORMAL

Press the DISP button.
•

Note
• Also see page 28 for information about exposure warning indicators.

Set the function switch to the REC position.

Press DISP again to clear the
number of remaining pages
and the resolution mode indicator from the monitor screen.

resolution mode
remaining pages

Record Mode Displays
Note

The following provides details on the images, indicators and messages that appear on the LCD in the Record Mode.

• The display/non-display status of the number of remaining pages
and the resolution mode indicator is linked to the page status
indicators(page 33) and the zoom indicator(page 36).

Image Display
An image of the object that is picked up by the camera’s lens appears
on the LCD. The camera is designed to refresh the image on the LCD
about seven times per second. Because of this, you may experience
a feeling of jerkiness in the changing image if you move the camera
quickly. This is normal and does not indicate malfunction.

Exposure Warning Indicators
Exposure warning indicators appear on the LCD whenever the light
being picked up by the lens would result in under exposure or over
exposure of an image.
○ ...... Under exposure

Note

● ...... Over exposure

• The LCD image that appears in the Playback Mode is more detailed
than the image produced in the Record Mode. Because of this, you
should consider the Record Mode image to be a reasonable facsimile of the image that is actually stored in memory.

Use the procedure described on page 27 to change the aperture or
change the lighting of the image so the indicator disappears from the
LCD.
27

Recording Images

Operation

Using the Self-Timer

Important!
• The exposure warning indicators also appear when lighting is outside the range of the camera. In such a case, changing the aperture
will not clear the indicator from the LCD.
• The manual exposure adjustment procedure (page 25) cannot be
used when an exposure warning indicator is on the LCD. Clear the
warning indicator by changing the aperture switch setting.
• Pressing the [+] or [–] button to adjust exposure while an exposure
warning indicator is on the LCD causes a +/– exposure value to
appear. This is an EV value.

With the Self-Timer, the shutter is released 10 seconds after you
/PROTECT button.
press the

•

Low Battery Indicator
The low battery indicator (
) appears in the center of the LCD
whenever remaining battery power drops below a certain level. It tells
you that power will soon turn off automatically if you continue using
the camera without replacing batteries. Be sure to replace all four
batteries with a fresh set of new ones.
Note that the camera is designed to automatically turn off power
earlier when a personal computer or other equipment is connected to
the camera’s DIGITAL terminal for data communications, in order to
protect against problems due to data corruption. Because of this, it is
recommended that your use the camera’s optional AC adaptor
whenever performing data communications.
• See page 13 for details on how to replace batteries.

•

Place the camera securely on a tripod, desk or other stable
surface, with the image to be recorded in the LCD.

•

After composing the image, press the
ton.

•

A 10-second countdown starts on the LCD. The shutter will
release automatically when the end of the countdown is
reached.

•

To cancel on ongoing Self-Timer operation, press the
PROTECT button or shutter button.

/PROTECT but-

Important!
• If battery power is low, camera power may turn off while a countdown is in progress. If this happens, replace the batteries with new
ones.

Operation

Playing Back Images

This section describes how to recall and view images stored in camera memory.

Notes
• If you set the function switch to PLAY after recording an image, that
image appears on the LCD first.

Displaying Images on the Camera’s LCD

• The message “MEMORY EMPTY” appears on the LCD if there are
no images stored in memory when you enter the Playback Mode.

Camera memory is divided into “pages”, and each image is assigned
to page that is numbered sequentially from 1 through 192 (NORMAL
resolution images). Note that all 192 pages are available only if all
images are recorded using the NORMAL Mode (page 25).

Displaying Images on a TV Screen
Use the special video cable that comes with the camera to connect it
to a television as illustrated below, and you can then view the images
stored in camera memory on the TV’s screen.

The following procedure describes how to display images on the
camera’s built-in LCD.

Start the Self-Timer operation.

• If you use the Self-Timer with the lens body rotate 180° (page 22),
you can view the countdown on the LCD while waiting for the shutter to release.

If you are recording images in the Fine Mode and there is not enough
memory for further Fine Mode recording, the message “REMAIN”
appears on the monitor screen along with a value that shows how
many images can still be recorded in the Normal Mode. You can
press MODE at this time to change to the Normal Mode and record
more image if you want.
The message “MEMORY FULL” means that there is not enough
memory for further recording in any mode. In this case, you have to use
the following procedures make room in memory for further recording.
• Delete some images from memory (page 46)
• Change the resolution of some of the stored images from FINE to
NORMAL (page 50)

Set the function switch to the REC position.

Note

Memory Full Message

Playing Back Images

Enter the Record Mode.

Enter the Playback Mode and turn on the camera.

Important!

•

Slide the function switch to the
PLAY position.

• The camera can be connected only to a TV that is equipped with a
VIDEO IN terminal.

•

When power comes on, the page
that was displayed when you last
turned power off appears on the
LCD.

REC

• Make sure that the power of both the camera and the TV are turned
off when making connections.

PLAY

• The signal output through this camera's VIDEO OUT terminal is an
NTSC signal. An image output through this terminal will not look
normal if the camera is connected to a PAL or other type of TV or
video deck.
VIDEO OUT terminal
Accessory video cable
TV

Scroll through the memory pages until the image you want
to view is displayed.
•

Press [+] to display the next memory page or [–] to display
the previous memory page.

•

To jump to the first (lowest numbered) image in memory,
press the shutter button and [–] button at the same time.

INPUT
L

VIDEO

AUDIO

•

Holding down [+] or [–] for about two seconds starts highspeed scrolling of images.

VIDEO IN terminal

[+]

After connecting the camera and TV, set the channel of the TV to the
channel used for video input.

[–]

After connecting the camera and TV, use the same procedures as
those described under “Displaying Images on the Camera’s LCD” on
page 31.
31

Playing Back Images

Operation

Important!

Producing a Multi-Page Display

• Note that only images already stored in camera memory can be
viewed on the TV screen. If you change to the camera’s Record
Mode, the image picked up by the camera’s lens will not appear on
the TV screen.

Four or nine memory pages can be displayed at the same time. This
feature can be used to display multiple memory pages on the camera's built-in LCD, or on the screen of a connected TV.

Page Status Indicators

Multi-Page Display (EFFECT Menu)

Pressing DISP in the Playback Mode causes page status indicators
to appear on the monitor display indicating page number, protect status, and resolution mode.

•

Enter the Playback Mode.
•

Set the function switch to the PLAY position.

The page number and resolution
mode are shown at the top of the
screen. If the page is protected
(page 41), a protect indicator ( )
is shown in the upper left corner.

•

resolution mode
page number

Press DISP again to clear the
page status indicators from the
screen.

Note
• The display/non-display status of the page status indicators is
linked to the remaining pages and resolution mode indicator (page
28) and to the zoom area indicator (page 36).

•

Press the EFFECT button to display the EFFECT Menu.

•

At this time either a 4-page or a 9page display format appears.

•

Note that you cannot use the
multi-page display while protected
memory pages are hidden (page
45).

Use the [+] and [–] buttons to scroll images forward and
back. Each press shows a new screen of four or nine new
images.
1

[–]

[+]
[–]

•

Use the [+] and [–] buttons to specify the screen size.

•

To clear the selection screen and quit this procedure, select
the EXIT icon.

Press the shutter button.

Operation

Scroll through the images.

[+]

Specify the screen size.

Playing Back Images

•

Slide the function switch to the PLAY position.

Display the EFFECT Menu.

Press the DISP button.
•

Enter the Playback Mode.

Move the frame to the image you want to select.
•

Press the shutter button.
•

Use the [+] and [–] buttons to move the frame around the
screen.

The selected image (the one with
the frame around it) appears on a
single-page display.

Unused pages are colored gray.

•

To clear the multi-page display and return to the normal single-page display, press any button besides [+] or [–].

Using the Zoom Function
This function lets you select a specific part of a stored image and
enlarge it to twice its normal size.

Selecting a Memory Page in a Multi-Page Display
You can use the following procedure to select one of the memory
pages in a multi-page display. Then when you return to the 1-page
display, the memory page you selected will be the one displayed. The
following procedure uses the 4-page display as an example, but you
can use the same procedure with the 9-page display.

Enter the Playback Mode.
•

Display the EFFECT Menu.
•

While a multi-page display (either 4-page or 9-page) is on
the screen, press the DISP button.
•

Slide the function switch to the PLAY position.

Press the EFFECT button to display the EFFECT Menu.

This causes the image in the upper left to be surrounded by a
frame.

In this example, we will select this page.

Select image enlargement.
•

Use [+] and [–] to select “ZOOM”.

•

To clear the selection screen and quit this procedure, select
the EXIT icon.

Playing Back Images

Operation
Notes

Press the shutter button.
•

• If the page number is displayed in the upper right corner of the
screen when you perform a zoom operation, the number is replaced
). This indicator shows you what part
by a zoom area indicator (
of the image is currently enlarged on the display. You can turn the
zoom area indicator on and off by pressing the DISP button.

At this time the image is doubled in size. The portion that
appears on the screen is the center of the image.

• Note that turning display of the zoom area indicator on and off during a zoom operation also affects the display of the image number
in the Record Mode (page 27), and the memory page number in the
Playback Mode (page 33).

•

Using Auto Play

Scroll the image on the screen.

Auto play lets you automatically scroll through the camera’s memory
pages quickly and easily. You can specify the speed of the scroll.

Use [+] and [–] to scroll as shown in the illustration below.

To clear the zoomed display and return to the normal size

Important!

display, press any button besides [+], [–], or DISP.

• The camera’s Auto Power Off function (page 16) does not function
while an auto play operation is in progress. If you forget to turn the
camera off, there is the danger that auto play will continue until batteries are dead. To avoid this, make sure that you stop the auto play
operation and turn the camera off when you finish viewing.

Changing the Location of the Zoom Area
[+]

[+]

To start the auto play operation

Enter the Playback Mode and turn on the camera.

Start the auto play operation.
•

Hold down the [+] and [–] buttons until the message “AUTO
PLAY START” appears.

• Pressing [–] moves the zoom area in the opposite direction.

Operation

Playing Back Images

Press MODE to enter the Auto Play Setting Mode.
•

3 seconds

•

3 seconds

Auto play continues to loop through the memory pages. This
means that when it reaches the last page, it starts again
from the first page.

Speed (number of
seconds each
image is displayed)

Press the shutter button to stop the auto play operation.
•

Pressing any button except the MODE button stops the auto
play operation.

•

Note that the buttons of the camera do not operate while a
page change operation is in progress. Make sure that an
image is shown on the display when you press a button to
stop the auto play operation.

Use [+] (increase) and [–] (decrease) to change the current
speed setting.
•

You can set the speed within a range of 3 to 30 seconds, in
three-second increments.

To start auto play using your newly set speed setting,
press the shutter button.

To set auto play speed
Use the following procedure to specify how long each image remains
on the display, within the range of 3 to 30 seconds.

Be sure to press MODE while an image is stopped on the
monitor, and not while images are changing.

•

To exit the auto play setting mode at any time, change the
function switch position to REC and then back to PLAY, or
turn power off. Either of these methods cancels any settings
you made and returns to the settings in effect when you entered the Auto Play Setting Mode.

•

You can use auto play in combination with the multi-page
display (page 34). First change to the multi-page format, and
then perform the auto play operation (page 38).

•

You cannot use auto play in combination with the multi-page
display while protected pages are hidden (page 45).

Perform steps 1 and 2 under “To start the auto play operation” on page 38 to start auto play.

Playing Back Images

Operation

Protecting Memory Pages

•

You can protect specific memory pages to ensure that they are not
accidently deleted.
• Note that you cannot protect or unprotect memory pages when protected memory pages are hidden (page 45).

To protect a single memory page

1.
2.

•

Display the PROTECT Menu.
Press the
/PROTECT button
to display the PROTECT Menu.

•

This menu lets you specify either
single-page protection or all-page
protection.

Select the Playback Mode and turn on power.
•

•

Use [+] and [–] to select “PAGE”.

•

To clear the selection screen and quit this procedure, select
the EXIT icon.

Press the shutter button.

•

/PROTECT button
Press the
to display the PROTECT Menu.

•

This menu lets you specify either
single-page protection or all-page
protection.

A protect indicator (
) appears
in the upper left corner of all
memory pages when you display
the page status indicators.

•

Use [+] and [–] to select “ALL” and then press the shutter
button.

•

When you select “ALL”, the message “PROTECT ALL?” appears on the screen.

Operation

Specify all-page protection.

•

Select “ALL”.

Playing Back Images

Use [+] and [–] to select “ALL” and
then press the shutter button.

Slide the function switch to the PLAY position.

Display the PROTECT Menu.

Select “PAGE”.

•

To clear the page protect screen, press any button besides
[+], [–], or the shutter button. The page protect screen is also
cleared automatically if you do not perform any button operation for about 20 seconds.

To protect all pages in memory

) appears in the upper left corner of
A protect indicator (
the display to indicate it is protected.

To protect some more images, repeat steps 5 and 6 above.

Slide the function switch to the PLAY position.

•

Use [+] and [–] to scroll through the pages until the one you
want to protect is displayed.

Press the shutter button to protect the displayed image.
•

Enter the Playback Mode.
•

Display the page you want to protect.

Press the shutter button to unprotect the displayed image.
•

The protect indicator disappears from the upper left corner
of the display to indicate the image is no longer protected.

To unprotect some more images, repeat steps 4 and 5
above.
•

Unprotecting Memory Pages
You can unprotect specific memory pages or all pages currently
stored in memory.

To unprotect all pages in memory

To unprotect a single memory page

•

Press the
Menu.

/PROTECT button to display the PROTECT

•

This menu lets you specify either a single page or all pages.

•

Use [+] and [–] to select “PAGE”.

•

To clear the selection screen and quit this procedure, select
the EXIT icon.

Press the shutter button.

•

Use [+] and [–] to select “ALL” and then select the shutter
button.

•

When you select “ALL”, the message “PROTECT ALL?” appears on the screen.

•

Specify all-page unprotection.
•

Use [+] and [–] to select “CANCEL” and then press the shutter button.

•

The protect indicator will not appear in the upper left corner
of any of the memory pages when you display the page status indicators.

This causes the “PROTECT PAGE” menu to appear.

Display the page you want to unprotect.
Use [+] and [–] to scroll through the pages until the one you
want to unprotect is displayed.
43

/PROTECT button to display the PROTECT

Select “ALL”.

Select “PAGE”.

•

In the Playback Mode, display the PROTECT Menu.
•

In the Playback Mode, display the PROTECT Menu.

Deleting
Operation

Playing Back Images

Hiding Protected Memory Pages

Use the procedures described in this section to delete memory
pages. You can delete individual pages, or all the pages currently
stored in memory.

This function makes it possible for you to hide protected memory
pages so their images do not appear on the monitor during playback.

Warning!

To hide protected memory pages

The delete operation cannot be undone!

While holding down the [+] button, turn on the camera.

Before performing any of the procedures described in this section,
make sure that you really do not need the images recorded on the
memory pages you are deleting. Be especially careful when you are
using the all delete operation.

Important!
• You cannot protect or unprotect pages (pages 41~44) while protected pages are hidden.
• You cannot display multiple images (page 34) while protected
pages are hidden.

Deleting Images From Memory

• The message “ALL DATA IS PROTECTED!” appears on the monitor when you hide protected memory pages and all pages currently
in memory are protected. It also appears if you delete all unprotected memory pages while protected memory pages are hidden.

• Note that you cannot delete images if they are protected. See page
43 for details on how to unprotect images.
• You cannot delete images from a multi-page display, a display of an
enlarged image, or while Auto Playback is operating.

To unhide protected memory pages

To delete a single image

While holding down the [–] button, turn on the camera.

Select the Playback Mode and turn on power.
•

Slide the function switch to the PLAY position.

•

Slide the POWER switch in the direction indicated by the
arrow.

Display the DELETE Menu.
•

4.
5.

Note

•

Use [+] and [–] to select “PAGE”.

•

To clear the selection screen and quit this procedure, select
the EXIT icon.

• Deleting a page causes the remaining pages to be renumbered.
Blank pages are not left inserted between non-blank pages.
2

Use [+] and [–] to display the image you want to delete.
Any images that are protected
(page 41) do not appear on the
screen during this operation.

Double check to make sure that you really want to delete
the image that is on the screen.
To abort the delete operation without deleting anything,
press any button other than [+], [–], or the shutter button.

Press the shutter button to delete the page.
•

Press the shutter button.

•

Operation

Select “PAGE”.

•

Press the DEL button to display
the DELETE Menu.

Deleting Memory Pages

Memory Pages

After you delete an image, the image on the next page appears on the screen.

To delete more images, repeat steps 5 through 7.
•

After you finish deleting all the images you want, press any
button other than [+], [–], or the shutter button to clear the
image delete screen.

Resolution
Operation

Deleting Memory Pages

To delete all images in memory

1.
2.

Use the following procedure to convert an image converted in the
FINE Mode to a NORMAL Mode image.

Enter the Playback Mode.
•

• After you convert a FINE image to a NORMAL image, the FINE
image is automatically deleted.

Slide the function switch to the PLAY position.

Display the DELETE Menu.
•

Press the DEL button to display
the DELETE Menu.

Select the Playback Mode and turn on power.
•

Slide the function switch to the PLAY position.

•

Slide the POWER switch in the direction indicated by the
arrow.

Display the FINE
•

Select “ALL”.
•

Conversion

NORMAL Menu.

Press the MODE button to display
NORMAL Menu.
the FINE

Use [+] and [–] to select “ALL” and press the shutter button.

Select “ALL”.
•

Use [+] and [–] to select “ALL”.

•

To clear the selection screen and
quit this procedure, select the
EXIT icon.

4.
5.

Press the shutter button to delete all images from memory.
•

After all images are deleted, the message “MEMORY
EMPTY” appears on the screen.

•

If you perform the above operation while protected images
are hidden, the message “ALL DATA IS PROTECTED!” appears on the screen.

VIDEO OUT – Use this terminal when connecting to the VIDEO IN
terminal of a TV, video tape deck, video printer, or
other similar devices. Use the special video cable
that comes with the camera for such connections.

After the conversion is complete, you can repeat steps 3
and 4 to convert more images.
After you are finished converting images, press any button
besides [+], [–], or the shutter button to clear the conversion
screen.

Device

• Make sure that the power of all devices is turned off before connecting them.
• You should also check the owner’s manuals of the device you are
connecting to the camera for precautions and other information.

VIDEO OUT
terminal
Special video
cable that comes
with camera

Television

VIDEO

• See page 32 of this manual for details about connecting to a television and displaying images from camera memory on a TV screen.

DIGITAL – Use this terminal to connect to a personal computer (requires optional Connection Kit), another CASIO Digital
Camera, or a QV Color Printer. The illustration below
shows how to connect to another digital camera.
DIGITAL terminal

Press the shutter button to start the conversion.

Important!

INPUT

VIDEO IN
terminal of other
device

Any images that are protected (page 41) do not appear on
the screen during this operation.

The following section provides specific information on how you can
use the camera after connecting to various types of devices. In each
case, the camera terminal you should connect to is indicated in the
title as VIDEO and DIGITAL .

The following describes which the camera terminal you should use
for each type of connection.

VIDEO

•

Using
the Camera
with Device
a Connected
Using
the Camera
with a Connected

The camera terminals

Use [+] and [–] to scroll through the images.

Connecting to Other Devices

AUDIO

•

Display the image you want to convert.

Video Tape Deck

VIDEO

You can use the video tape deck to record images from the camera.

To record camera images on video tape

DIGITAL terminal*

1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the video tape deck.

Connecting
cable*

2. Set up the video tape deck to record images input through its
VIDEO IN terminal.
• Consult the owner’s guide that comes with the tape deck for details
about how to set up for recording.
3. Enter the camera Playback Mode and start the video deck record
operation.

* The type of connecting cable you should use depends on the type
and shape of the terminals equipped on the digital camera you are
connecting to. See pages 52 through 58 for details.

• It is probably best to use auto play when recording camera images
to video tape, because it changes pages automatically at a preset
speed.
51

Using the Camera with a Connected Device

Connecting to another CASIO Digital Camera

• Remaining pages (page 28) are also recorded on the video tape if
they are turned on. Be sure to turn off display of remaining pages if
you do not want them in the taped images.

DIGITAL

You can connect the camera to another CASIO digital camera and
exchange image data between them. Connect the DIGITAL terminals
of the two cameras using the optionally available SB-62 connecting
cable.

• If the low battery indicator (page 29) is displayed while you are recording to video tape, it will also be recorded with the image. If this
happens, either replace batteries or use the AC adaptor.

Video Printer

To connect the two cameras
VIDEO

1. Turn both cameras off.

You can use Video Printer to print copies of images in camera
memory.

2. Connect the two cameras by plugging the optional SB-62 connection cable into their DIGITAL terminals.

To print camera images on a Video Printer

3. Turn both cameras on.

1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the video printer.

To send data from this camera to another camera
1. Set the function switches of both cameras to PLAY.

2. Set up the video printer to print images input through its VIDEO IN
terminal.

2. Use the [+] and [–] buttons of this camera to find the image you
want to send.

• Consult the owner’s guide that comes with the video printer for details about how to set up for printing.

• You cannot send images between two cameras while either of their
function switches is set to REC.

3. Enter the camera Playback Mode and display the image you want
to print.

• You cannot send images while using the multi-page display or
zoom function.

4. Start the video printer’s print operation.

3. Press the shutter button of this camera.

• Remaining pages (page 28) are also included on the print if they are
turned on. Be sure to turn off display of remaining pages if you do
not want them in the print.
• If the low battery indicator (page 29) is displayed while you are printing, it will also be printed with the image. If this happens, either replace batteries or use the AC adaptor.

Return to previous display
Receive icon
Send icon

Using the Camera with a Connected Device

4. Use the [+] and [–] buttons to move the pointer to the send icon.

4. Use the [+] and [–] buttons to move the pointer to the receive icon.

5. After you make the setting you want, press the shutter button
again.

• As soon as you perform the above step, all of the buttons and controls on the other camera become disabled.

• Pressing the shutter button sends the selected image to the other
camera.

5. After you make the setting you want, press the shutter button
again.

• You can send only one image at a time. To send more images,
repeat steps 2 through 5.

• Pressing the shutter button receives the selected image from the
other camera.

To receive data to this camera from another camera

* You can receive only one image at a time. To send more images,
repeat steps 2 through 5.

1. Set the function switches of both cameras to PLAY.
2. Use the [+] and [–] buttons of other camera to find the image you
want to receive.

Important!
Never disconnect the cable, turn power off, or change the function
switch setting while a data communication operation is in progress.
Doing so can damage the camera.

• You cannot receive images between two cameras while either of
their function switches is set to REC.
• You cannot receive multi-page display or zoomed images.
• If you try to receive a multi-page display or zoomed images, other
camera’s monitor automatically changes to normal display of page
1.

How data transfer affects resolution
• QV-300

3. Press the shutter button of this camera.

QV-300/QV-100 ........... FINE

FINE

NORMAL
• QV-300

• QV-300

Return to previous display
Receive icon
Send icon

QV-10/QV-10A/QV-11/QV-30 .... FINE

NORMAL
NORMAL

NORMAL

QV-10/QV-10A/QV-11/QV-30 ..... NORMAL

NORMAL

Using the Camera with a Connected Device

Using QV-Link Software and a Connection Cable

Computer (Video Capture)

The optionally available QV-Link Software and connection cable lets
you transfer images from your digital camera to a personal computer.
The following are the models of QV-Link software that support this
camera.

You can use the special video cable that comes with the camera to
connect directly to the VIDEO IN terminal of a personal computer
equipped with video capture capabilities.

To transfer camera images to a personal computer (video
capture)

Windows Version: LK-10V
Macintosh Version: LK-2V

1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the computer.

Important!

2. Enter the camera Playback Mode and display the image you want
to send.

• This camera does not fully support the software that comes with the
LK-1 and LK-1A connection kits for Windows, and the LK-2 and LK2A connection kits for the Macintosh. Never try to use the software
that comes with these connections kits with this digital camera.

Connecting to a QV color Printer

3. Perform the required operation on the computer.
• Consult the owner’s guide that comes with the computer or its video
capture board for details about how to set up to capture images.

DIGITAL

Important!

You can connect this camera to a CASIO QV color Printer and printout images that are in camera memory. Use the communication cable
that comes with the QV Color Printer to connect camera's DIGITAL
terminal to the QV Color Printer's terminal.

• With this configuration, you cannot send images from the personal
computer to the camera.
• The camera can be connected directly to a personal computer or
video capture board that is equipped with a VIDEO IN terminal
(RCA pin jack). It cannot be connected directly to an S-VIDEO terminal.

Applicable printer model: CASIO QG-100
After connecting the two units, turn on camera power and slide the
function switch to the PLAY position. For details on how to perform
the QV Color Printer procedures required for printing, see the documentation that comes with the QV Color Printer.

Troubleshooting

Power Supply

No power

Probable Cause

Reference
Action

Sympton

Sudden power 1. O p e r a t i o n o f A u t o 1. Turn power back on.
failure
Power Off
2. Low battery power
2. Replace batteries with
Use of manganese
new ones (page 13).
batteries.
Replace manganese
batteries with alkaline
batteries.

Change aperture switch
setting to [●] (page 27).

○ indicator on Under exposure
LCD

Change aperture switch
setting to [○] (page 27).

Playback

Recording

● indicator on Over exposure
LCD

Poor color and Indoor fluorescent lighting Shoot under incandesbrightness when
cent or other non-fluoresindoors
cent lighting (page 21).

Color of
recorded image
is strange.

N o r e c o r d i n g Function switch sets to Set function switch to
w h e n s h u t t e r PLAY.
REC.
button
is
pressed
Replace batteries (page
13).

Action

Recorded image Strong direct or reflected Change aperture setting
h a s g r e e n i s h sunlight
to [●]. Note that this continge.
dition is due to CCD characteristics, and does not
indicate camera malfunction.

indicator Power will automatically Replace all four batteries
on LCD
turn off shortly.
with a set of new ones
(page 13).

P o w e r f a i l u r e Low battery power
during self-timer
operation

Probable Cause

Poor LCD image I n c o r r e c t N O R M A L / Use NORMAL for scenfocus
MACRO switch setting ery and group photos,
and MACRO for closeups (page 24).

1. Batteries not loaded 1. Correctly load battercorrectly.
ies (page 13).
2. Dead batteries
2. Replace batteries with
new ones (page 13).
3. Wrong AC adaptor
3. U s e o n l y r e c o m mended AC adaptor .

Recording

Symptom

VIDEO

1. Reflection from sun- 1. Reorient the camera
light or light from anso that light is not shinother source
ing directly into lens.
2. Difference between 2. This difference does
Record Mode and
not indicate a problem
Playback Mode charor malfunction.
acteristics.

No +/– button Button operation during Wait until an image is on
operation during page change
the LCD before performmulti-page dising a button operation.
play
All pages do not Protected memory pages Unhide protected memoappear during are hidden.
ry pages (page 45).
auto play.

Reference

Troubleshooting
Sympton

Probable Cause

Action

Sympton

Deletion

Camera is con- 1. Function switch set to 1. Set function switch to
REC
PLAY (page 31).
nected to a TV,
but LCD monitor 2. Incorrect camera-TV 2. Connect correctly usconnection
ing the special video
contents do not
cable that comes with
appear on TV
the camera (page 32).
screen.
3. Wrong TV set up
3. Set up the TV correctly.

Playback

Action

Delete opera- 1. All pages are pro- 1. Unprotect the page
tion does not
tected.
you want to delete
start when DEL
(page 43).
is pressed.
2. M u l t i - p a g e d i s p l a y 2. Change to a normal(page 34) or zoom dissize, 1-page display
play (page 36)
format.
All buttons and Malfunction due to static Remove batteries and
switches do not electrical charge or strong disconnect the AC adapoperate.
impact
tor if you are using one.
Restore power and turn
the camera on. If this
does not work, contact
your dealer or an authorized CASIO service provider.

Some images Protected memory pages Unhide protected memoare hidden.
ry pages by holding down
are missing.
[–] while turning power on
(page 45).
C a n n o t u s e Protected memory pages Unhide protected memory pages by holding down
multi-page dis- are hidden.
[–] while turning power on
play.
(page 45).

Very bright or Wrong BRIGHT setting
very dark LCD
image.

Other

Cannot protect Protected memory pages Unhide protected memory pages by holding down
memory pages. are hidden.
[–] while turning power on
(page 45).
ALL DATA IS Protected memory pages
PROTECTED! are hidden.
stays on monitor
and images do
not appear.

Probable Cause

Unhide protected memory pages by holding down
[–] while turning power on
(page 45).

Adjust the BRIGHT setting (page 11).

No buttons or Malfunction due to expos- Remove batteries and/or
switches oper- ing camera to electro- unplug the AC adaptor.
Reload batteries and/or
ate.
static charge.
plug in AC adaptor and try
operation again.
LCD monitor is Incorrect BRIGHT setting A d j u s t t h e B R I G H T
(brightness) setting.
too bright or too
dark.
C a n n o t e x - 1. Incorrect cable con- 1. C o n n e c t c o r r e c t l y
(page 51).
change data benection
tween two cam- 2. Camera connected to 2. Turn power on after
connecting cable.
eras
is not turned on.
3. Function switch sets to 3. Set function switch to
PLAY (page 31).
REC.

Troubleshooting
Sympton

Probable Cause

Reference

Messages

Action

Other

Pressing MODE There are no convertible
does not change images in memory.
the FINE
NORMAL Menu.
Cannot transfer 1. S e n d i n g c a m e r a ’ s 1. Correct the situation
data (error
and try again.
memory is empty.
keeps occurring) 2. Receiving camera’s 2. Correct the situation
and try again.
memory is full
3. Receiving camera’s 3. C h a n g e f u n c t i o n
switch setting of refunction switch is in
ceiving camera to
REC position.
PLAY (page 31).
4. The message “ALL 4. The sending camera’s
protected memory
DATA IS PROTECTpages are hidden. UnED” is on the monitor
hide protected memory
of the sending camera.
pages by holding down
[–] while turning power
on (page 45).
5. Low battery (indicated 5. Replace batteries or
use the AC adaptor
)
by
(page 13).
6. Disconnection of cable 6. Securely reconnect the
cable.
during data communication

ALL DATA IS
PROTECTED

Camera is set up to hide protected images, and all
images are protected.

ERROR

Error during data communication. Check cable connections and mode settings.

REMAIN

No more memory for FINE images. Use MODE to
change to NORMAL Mode, delete some images, or
change resolution of existing images from FINE to
NORMAL.

MEMORY FULL

Not enough memory for further recording. Delete
some images from memory or change resolution of
stored images from FINE to NORMAL.

MEMORY EMPTY

No images are stored in memory.

Problem with internal memory. Contact your dealer or
MEMORY ERROR
an authorized CASIO service provider.
#1~#4
CONSULT THE
OWNER’S MANUAL!

K e y s o f c o n - Connected camera op- Normal operation will renected camera eration is disabled during turn when you exit data
are disabled.
communications by pressdata communications.
ing EXIT.

Specifications

Reference

General

Terminals ................ DIGITAL; VIDEO OUT; DC IN 6V

Recording System ... Digital (JPEG based)

Power Supply .......... Batteries (AA-size Alkaline or Lithium batteries X 4)/
AC Adaptor (AD-C60)

Signal System ......... NTSC

Imaging Device ....... 1/4-inch CCD (Total Number of Pixels: 360,000)

Battery Life .............. LR6 (AM3) AA-size alkaline batteries
Approximately 130 minutes continuous operation
Recording for about 96 images (one image per
minute)
FR6 AA-size lithium batteries
Approximately 220 minutes continuous operation
Recording for about 180 images (one image per
minute)

Lens ........................ 2 focal points with macro position: F2.6 f=4.9mm/
f=11.0mm

Dimensions ............. 72 (H) X 162 (W) X 49 (D)mm /
2.8" (H) X 6.4" (W) X 1.9" (D)

Aperture .................. F2.6/F8 manual switching

Weight ..................... Approximately 250g / 8.8oz (excluding batteries)

Recording Medium .. Built-in 32-Mbit flash memory
Number of Memory Pages
FINE(VGA) ............ 64 (approximately 480-kbit compressed)
NORMAL(Q-VGA) ... 192 (approximately 160-kbit compressed)
Delete Functions ..... Single page; All pages (with page protect feature)

Focal Length
f=4.9mm

F2.6

Accessories ............. Wrist strap; soft case; video cable; Alkaline batteries
(LR6 X 4); cleaning cloth; owner’s manual

Normal

0.6m(2') ~ ∞

0.3m(1') ~ ∞

Macro

9cm(3.5") ~ 11cm(4.3")

7cm(2.8") ~ 14cm(5.5")

f=11.0mm

F2.6

Normal

3.4m(11.2') ~ ∞

1.7m(5.6') ~ ∞

Macro

52cm(1.7') ~ 62cm(2')

44cm(1.4') ~ 77cm(2.5')

• The liquid crystal panel built into this camera is the product of precision engineering, with an effective pixel rate of 99.99%. This also
means, however that 0.01% of the pixels can be expected to fail to
light or to remain lit at all times.

About the camera’s backlight…

Light Metering ......... TTL center point by photographic element

• The camera is equipped with a fluorescent light source to provide
the back lighting for its LCD.

Exposure Metering .. Aperture priority AE
Exposure Range ..... EV +5 to 18

• The normal service life of the backlight is approximately six years,
when the camera is used for about two hours a day.

Exposure Adjustment .. -2EV to +2EV
Shutter System ....... Electronic

• Should the LCD image appear abnormally dark, take the camera to
your dealer or an authorized CASIO service provider to have the
light source replaced. Note that you will be charged for this replacement.

Shutter Speed ......... 1/8 to 1/4000 second
White Balance ......... Automatic
Self-timer ................. 10-second
Resolution ............... FINE, NORMAL

• Under very cold conditions, the backlight may require more time
than normal to light, or reddish bands may appear in the image.
These conditions do not indicate malfunction, and normal operation
should return at higher temperatures.

Monitor .................... 61,380-pixel 2.5-inch TFT low-glare color LCD;
doubles as finder
PC Output Image .... 480 X 640 dots (FINE)
240 X 320 dots (NORMAL)

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2001:04:27 13:19:19Z
Modify Date                     : 2004:05:26 14:15:15+09:00
Page Count                      : 17
Creation Date                   : 2001:04:27 13:19:19Z
Producer                        : Acrobat Distiller 4.05 for Windows
Mod Date                        : 2004:05:26 14:15:15+09:00
Metadata Date                   : 2004:05:26 14:15:15+09:00

EXIF Metadata provided by EXIF.tools

Casio Qv 300 Owners Manual

Casio-Qv-300-Users-Manual-770379 casio-qv-300-users-manual-770379

Qv300 qv300

User manual qv300 Casio QV-300 Digital Camera User Manuals and Instruction Guides

QV 300 to the manual 7ad9c77f-cfa7-40ff-be28-f95a969ea8b9

QV300 QV300_EN QV-300 | Digital Cameras | Manuals | CASIO

Navigation menu

Versions of this User Manual:

Views

Navigation