Casio Qv R40 Part 7 Users Guide K864PCM1DKX E
Qvr40-7 qvr40-7
QVR40_7 QVR40_7_EN QV-R40 | Digital Cameras | Manuals | CASIO
QV-R40 Part 7 - User's Guide QVR40_7 Free User Guide for Casio Camera, Manual - page3
2015-08-11
: Casio Casio-Qv-R40-Part-7-Users-Guide-784453 casio-qv-r40-part-7-users-guide-784453 casio pdf
Open the PDF directly: View PDF 
.
Page Count: 59
| Download | |
| Open PDF In Browser | View PDF |
OTHER SETTINGS OTHER SETTINGS Specifying the File Name Serial Number Generation Method Use the following procedure to specify the method for generating the serial number used for file names (page 104). 1. In the REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “File No.”, and then press []. 3. Use [] and [] to change the setting, and then press [SET]. 117 To do this for a newly saved file: Select this setting: Store the last file number used and increment it, regardless of whether files are deleted or whether the memory card is replaced with a new one Continue Find the highest file number in the current folder and increment it Reset OTHER SETTINGS Turning the Key Tone On and Off Specifying an Image for the Startup Screen Use the following procedure to turn the tone that sounds when you press a key on and off. You can specify an image you recorded as the startup screen image, which causes it to appear on the monitor screen for about two seconds whenever you press the ] (REC) to turn on the camera. The power button or [ startup screen image does not appear if you press [ ] (PLAY) to turn on the camera. 1. In the REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “Beep”, and 1. In the REC mode or the PLAY mode, press then press []. [MENU]. 3. Use [] and [] to change the setting, and 2. Select the “Set Up” tab, select “Startup”, and then press [SET]. then press []. To do this: Select this setting: Turn on the key tone On Turn off the key tone Off 3. Use [] and [] to display the image you want to use as the startup image. • You can specify a snapshot image or a movie image that is two seconds (200KB) or less in length. 4. Use [] and [] to change the setting, and then press [SET]. 118 To do this: Select this setting: Use the currently displayed image as the startup screen image On Disable the startup screen Off OTHER SETTINGS IMPORTANT! Configuring Power Down Image Settings • The snapshot image or movie that you select as the startup image is stored in a special memory location called “startup image memory”. Only one image can be stored in startup image memory at one time. Selecting a new startup image overwrites anything that is already stored in startup image memory. Because of this, if you want to return to a previous startup image, you need to have a separate copy of that image in the camera’s standard image memory. Note that you cannot delete an image from startup image memory. You can only replace it with another image. With the Power Down Image feature, you can configure the camera so a specific image stored in camera image memory appears whenever you turn off power. You can specify a snapshot or a movie as the power down image. ■ To configure power down image settings 1. Use the USB cable to connect the camera to your computer (page 135). 2. Move the image data that you want to use for the power down image to the top (root) directory of the camera’s built-in Flash memory. • The file name extension will not be displayed if your computer is configured to hide file name extensions. Example: CIMG0001 • If your power down image is stored on a memory card, be sure to copy the image to built-in memory before removing the memory card from the camera. 119 OTHER SETTINGS 3. Change the name of the file to one of the IMPORTANT! following. • Only a snapshot (JPEG) or movie (AVI) file can be used as the power down image. • Note that the Power Down Image feature works only with images recorded with this camera. The Power Down Image feature may not operate properly when another type of image is specified as the power down image. • Formatting the camera’s Flash memory deletes the power down image. • When both a still image and a movie are present for the power down image, only the movie is used. • Note that a power down image display operation cannot be interrupted once it starts. Because of this, you should select a relatively short movie when using a movie file as the power down image. Snapshot Image: ENDING.JPG Movie Image: ENDING.AVI • Input the following file name only (without file name extension) if your computer is configured to hide file name extensions. File Name: ENDING • Your camera is now configured to display a power down image. The power down image will appear any time you press the power button to turn off the camera. The power down image appears regardless of whether or not your camera has a memory card loaded in it. 120 OTHER SETTINGS ■ To disable the Power Down Image feature Using the Alarm You can configure up to three alarms that cause the camera to beep and display a specified image at the time you specify. 1. Use the USB cable to connect the camera to your computer. 2. Change the name of the current power down To set an alarm image from ENDING.JPG or ENDING.AVI to something else, or delete the current power down image from Flash memory. 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Alarm”, and then press []. 3. Use [] and [] to select the alarm whose setting you want to configure, and then press []. 4. Use [] and [] to select the setting you want to change, and then use [] and [] to change the selected setting. • You can set an alarm time and configure the alarm to sound either once or at the same time everyday. You can also turn the alarm on or off. 121 OTHER SETTINGS 5. Press [DISP]. Stopping the Alarm • You could press [SET] in place of [DISP] if you want to configure the alarm without an image. When an alarm time is reached while the camera is turned off, the alarm will sound for about one minute (or until you stop it), and then the camera will turn on. To stop the alarm after it starts to sound, press any button. 6. Use [] and [] to select the scene you want to appear at the alarm time, and then press [SET]. IMPORTANT! • Note that the alarm does not sound if the alarm time is reached when any one of the following conditions exists. — While the camera is turned on — While a USB data communication operation is in progress 7. After all the settings are the way you want, press [SET]. • You can configure up to three alarms, named “Alarm 1”, “Alarm 2”, and “Alarm 3”. 122 OTHER SETTINGS 4. Use [] and [] to select “City”, and then Setting the Clock press []. Use the procedures in this section to select a Home Time Zone, and to change its date and time settings. 5. Use [], [], [], and [] to select the geographical area that contains location you want to select as your Home Time zone, and then press [SET]. IMPORTANT! • Make sure you select your Home Time zone (the zone where you are currently located) before changing the time and date settings. Otherwise, the time and date setting will change automatically when you select another time zone. 6. Use [] and [] to select the city you want, and then press [SET]. 7. After selecting the city you want, press [SET] to register its zone as your Home Time zone. To select your Home Time zone 1. In the REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “World Time”, and then press []. • This displays the current World Time zone. 3. Use [] and [] to select “Home”, and then press []. 123 OTHER SETTINGS To set the current time and date Changing the Date Format 1. In the REC mode or the PLAY mode, press You can select from among three different formats for display of the date. [MENU]. 1. In the REC mode or the PLAY mode, press 2. Select the “Set Up” tab, select “Adjust”, and [MENU]. then press []. 2. Select the “Set Up” tab, select “Date Style”, 3. Set the current date and the time. and then press []. To do this: Do this: Change the setting at the current cursor location Press [] or []. then press [SET]. Move the cursor between settings Press [] or []. Example: October 23, 2003 Toggle between 12-hour and 24hour timekeeping Press [DISP]. 3. Use [] and [] to change the setting, and 4. When all the settings are the way you want, press [SET] to register them and exit the setting screen. 124 To display the date like this: Select this format: 03/10/23 YY/MM/DD 23/10/03 DD/MM/YY 10/23/03 MM/DD/YY OTHER SETTINGS To configure World Time settings Using World Time You can use the World Time screen to view a time zone that is different from the home time zone when you go on a trip, etc. World Time can display the time in one of 162 cities in 32 time zones. 1. In the REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “World Time”, and then press []. To display the World Time screen • This displays the current World Time zone. 1. In the REC mode or the PLAY mode, press 3. Use [] and [] to select “World”, and then [MENU]. press []. 2. Select the “Set Up” tab, select “World Time”, 4. Use [] and [] to select “City”, and then and then press []. press []. • This displays the current World Time zone. 5. Use [], [], [], and 3. Use [] and [] to select “World”. To do this: Select this: Display the time in your home time zone Home Display the time in a different time zone World [] to select the geographical area you want, and then press [SET]. 4. Press [SET] to exit the setting screen. 125 OTHER SETTINGS 6. Use [] and [] to To configure summer time (DST) settings select the city you want, and then press [SET]. 1. In the REC mode or the PLAY mode, press • This displays the current time in the city you select. [MENU]. 2. Select the “Set Up” tab, select “World Time”, and then press []. 7. When the setting is the way you want, press • This displays the current World Time Settings. [SET] to apply it and exit the setting screen. 3. Use [] and [] to select “World”, and then press []. • If you want to configure Home Time settings, select “Home” instead. 4. Use [] and [] to select “DST”, and then press []. 5. Use [] and [] to select the summer time (DST) setting you want. 126 To do this: Select this: Advance the current time setting by one hour On Display the current time as-is Off OTHER SETTINGS 6. After the setting is the way you want, press Changing the Display Language [SET]. You can use the following procedure to select one of ten languages as the display language. • This displays the current time in accordance with your setting. 7. Press [SET] again to exit the setting screen. 1. In the REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “Language”, and then press []. 3. Use [], [], [], and [] to change the setting, and then press [SET]. : Japanese English : English Français : French Deutsch : German Español : Spanish Italiano : Italian Português : Portuguese : Chinese (Complex) : Chinese (Simplified) : Korean 127 OTHER SETTINGS 4. Select “Format”, and then press [SET]. Formatting Built-in Memory • To exit the format operation without formatting, select “Cancel”. Formatting built-in memory deletes any data stored in it. IMPORTANT! • Note that data deleted by a format operation cannot be recovered. Check to make sure you do not need any of the data in memory before you format it. • Formatting built-in memory deletes all files, including files in the FAVORITE folder (page 112), protected files (page 105), Best Shot user setups (page 75), the startup image (page 118), and the power down image (page 119). 1. Check to make sure there is no memory card loaded in the camera. • If there is a memory card loaded in the camera, remove it (page 130). 2. In the REC mode or the PLAY mode, press [MENU]. 3. Select the “Set Up” tab, select “Format”, and then press []. 128 USING A MEMORY CARD USING A MEMORY CARD You can expand the storage capabilities of your camera by using a commercially available memory card (SD memory card or MultiMediaCard). You can also copy files from built-in flash memory to a memory card and from a memory card to flash memory. IMPORTANT! • Make sure you turn off the camera before inserting or removing a memory card. • Be sure to orient the card correctly when inserting it. Never try to force a memory card into the slot when you feel resistance. • See the instructions that come with the memory card for information about how to use it. • Certain types of cards can slow down processing speeds. • SD memory cards have a write protect switch, which you can use to protect against accidental deletion of image data. Note, however, if you write protect an SD memory card, you must remove write protection whenever you want to record to it, format it, or delete any of its files. • Normally, files are stored in built-in flash memory. When you insert a memory card, however, the camera automatically stores files to the card. • Note that you cannot save files to built-in memory while a memory card is installed in the camera. 129 USING A MEMORY CARD 3. Swing the battery Using a Memory Card compartment cover closed, and then slide it in the direction indicated by the arrow. To insert a memory card into the camera 1. While pressing the battery compartment cover on the bottom of the camera, slide the cover in the direction indicated by the arrow, and then swing it open. To remove a memory card from the camera 1. Press the memory card into 2. Positioning the memory the camera and then release it. This will cause the card to come part way out of the camera. card so its back is facing in the same direction as the camera’s monitor screen, carefully slide it into the card slot. 2. Pull the memory card out of the slot. Front Back 130 USING A MEMORY CARD IMPORTANT! Formatting a Memory Card • Never insert any other object besides a memory card into the camera’s card slot. Doing so creates the risk of damage to the camera and card. • Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the batteries, and contact your dealer or nearest CASIO authorized service center. • Never remove a card from the camera while the operation lamp is flashing. Doing so can cause the file save operation to fail, and even damage the memory card. Formatting a memory card deletes any data already stored on it. IMPORTANT! • Be sure to use the camera to format a memory card. Formatting a memory card on a computer and then using it in the camera can slow down data processing by the camera. In the case of an SD card, formatting on a computer can result in nonconformity with the SD format, causing problems with compatibility, operation, etc. • Note that data deleted by a memory card format operation cannot be recovered. Check to make sure you do not need any of the data on the memory card before you format it. • Formatting a memory card that contains files deletes all the files, even those that are protected (page 105). 131 USING A MEMORY CARD 1. Load the memory card into the camera. Memory Card Precautions 2. Turn on the camera. Next, enter the REC • Use only an SD memory card or a MultiMediaCard with this camera. Proper operation is not guaranteed when any other type of card is used. • Electrostatic charge, electrical noise, and other phenomena can cause data to become corrupted or even lost. Always make sure that you always back up important data on other media (MO disc, computer hard disk, etc.). • If a memory card starts to behave abnormally, you can restore normal operation by reformatting it. However, we recommend that you always take along more than one memory card whenever using the camera far away from the home or office. • We recommend that you format a memory card before using it for the first time after purchasing it, or whenever the card you are using seems to be the cause of abnormal images. • Before starting a format operation, check to make sure that the batteries are fully charged. Power interruption during the format operation can result in improper formatting, and even damage the memory card and make it unusable. mode or PLAY mode, and press [MENU]. 3. Select the “Set Up” tab, select “Format”, and then press []. 4. Use [] and [] to select “Format”, and then press [SET]. • To exit the format operation without formatting, select “Cancel”. 132 USING A MEMORY CARD 4. Use [] and [] to select “Built-in Copying Files Card”, and then press [SET]. Use the procedures below to copy files between built-in memory and a memory card. • This starts the copy operation and displays the message “Busy....Please wait...”. • After the copy operation is complete, the monitor screen shows the last file in the folder. IMPORTANT! • Only snapshot and movie files recorded with this camera can be copied. Other files cannot be copied. To copy all the files in built-in memory to a memory card 1. Load the memory card into the camera. 2. Turn on the camera. Next, enter the PLAY mode, and press [MENU]. 3. Select the “PLAY” tab, select “Copy”, and then press []. 133 USING A MEMORY CARD NOTE To copy a file from a memory card to built-in memory • Files are copied to the folder in built-in memory whose name has the largest number. With this procedure you can copy one file at a time. 1. Perform steps 1 through 3 of the procedure under “To copy all the files in built-in memory to a memory card”. 2. Use [] and [] to select “Card Built-in”, and then press [SET]. 3. Use [] and [] to select the file you want to copy. 4. Use [] and [] to select “Copy”, and then press [SET]. • This starts the copy operation and displays the message “Busy....Please wait...”. • The file reappears on the monitor screen after the copy operation is complete. • Repeat steps 3 through 4 to copy other images, if you want. 5. Press [MENU] to exit the copy operation. 134 VIEWING IMAGES ON A COMPUTER VIEWING IMAGES ON A COMPUTER After using the USB cable to establish a USB connection between the camera and your computer, you can use your computer to view images in file memory and copy images to your computer’s hard disk or other storage media. In order to do this, you first need to install the USB driver located on the CD-ROM that comes bundled with the camera onto your computer. If you have a Macintosh running Mac OS 9 or OS X (10.1, 10.2 or higher), use the standard USB driver that comes with your OS. Note that the procedure you need to perform depends on whether you are using computer running under Windows (see below) or a Macintosh (see page 140). Using the Camera with a Windows Computer The following are the general steps for viewing and copying files from a computer running under Windows. You can find details about each operation in the procedures that follow below. Note that you should also refer to the documentation that comes with your computer for other information about USB connections, etc. 1. If you are running Windows 98, Me, or 2000, install the USB driver onto your computer. • You need to perform this step only once, the first time you connect to your computer. • If you are running Windows XP, you do not need to install the USB driver. 2. Use the USB cable to establish a connection between the camera and computer. 3. View and copy the images you want. 135 VIEWING IMAGES ON A COMPUTER 1. What you should do first depends on whether IMPORTANT! your computer is running under Windows 98/ Me/2000 or Windows XP. • You need the optional AC adaptor (AD-C30) in order to connect the camera to a computer using the USB cable. If you do not use the AC adaptor to power the camera, it will be powered only by its batteries, which creates the risk of sudden power failure during file transfer should batteries go low. Such power failure can cause corruption of camera memory and/or your memory card. • Do not try to establish a connection between the camera and computer before installing the USB driver onto the computer. • If you want to transfer files from the camera’s built-in memory to a computer, make sure there is no memory card loaded in the camera before you connect the USB cable. ■ Windows 98/Me/2000 Users • Start from step 2 to install the USB driver. • Note that the example installation presented here uses Windows 98. ■ Windows XP Users • Installation of the USB driver is not required, so jump directly to step 6. 2. Set the bundled CD-ROM into the CD-ROM drive of your computer. 3. On the menu screen that appears, click the language button in the upper left corner of the display, and then select a language from the list that appears. 136 VIEWING IMAGES ON A COMPUTER 4. Click [USB driver] and then [Install]. 6. Connect the optional AC adaptor to the [DC IN 3V] connector of the camera, and then plug it in to a household power outlet. • This starts installation. • The following steps show installation under the English version of Windows. Terminal cover 5. On the screen that appears after installation is complete, select the “Yes, I want to restart my computer now.” check box and then click [Finish] to restart your computer. [DC IN 3V] AC adaptor AC power cord Plug 137 VIEWING IMAGES ON A COMPUTER 7. Turn on the camera. • This will cause the “New Hardware...” dialog box to appear on the computer screen as the computer automatically detects the camera’s file memory. After you install the USB driver, “New Hardware...” dialog box will no longer appear when you perform the above steps to establish a USB connection. 8. Connect the USB cable that comes bundled with the camera to the camera and your computer’s USB port. USB port USB cable (bundled) • The camera’s green operation lamp lights (page 164). Connector (Mini-B) Green operation lamp [USB] Connector (A) USB • At this point, some operating systems will display a “Removable Disk” dialog box. If your operating system does, close the dialog box. • Take care when connecting the USB cable to the camera or your computer. USB ports and cable plugs are shaped for proper positioning. • Plug the USB cable plugs into the ports securely, as far as they will go. Proper operation is not possible if connections are not correct. 138 VIEWING IMAGES ON A COMPUTER 9. On your computer, double-click “My IMPORTANT! Computer”. • Never use your computer to edit, delete, move, or rename images stored in file memory. Doing so can cause problems with the image management data used by the camera, which may make it impossible to display images on the camera or it may cause a large error in the number of images value displayed by the camera. Always copy images to your computer memory before performing any edit, delete, move, or rename operation. 10. Double-click “Removable Disk”. • Your computer sees the camera’s file memory as a removable disk. 11. Double-click the “Dcim” folder. 12. Double-click the folder that contains the image you want. 15. Depending on the version of Windows you are running, use one of the following procedures to terminate the USB connection. 13. Double-click the file that contains the image you want to view. ■ WindowsMe/98/XP Users • For information about file names, see “Memory Directory Structure” on page 146. • Press the camera’s power button. After making sure that the camera’s green operation lamp is not lit, disconnect the camera from the computer. 14. To copy all the files in file memory to your computer’s hard disk, drag the “Dcim” folder from “Removable Disk” to the “My Documents” folder on your computer. ■ Windows2000 Users • Click card services in the task tray on your computer screen, and disable the drive number assigned to the camera. Next, disconnect the USB cable from the camera, and then turn off the camera. 139 VIEWING IMAGES ON A COMPUTER USB Connection Precautions Using the Camera with a Macintosh Computer • Be sure to connect the AC adaptor to the camera to supply power to the camera. • Do not leave the same image displayed on your computer screen for a long time. Doing so can cause the image to “burn in” on the screen. • Never disconnect the USB cable, or perform any camera operation while data communication is in progress. Doing so can cause data to become corrupted. The following are the general steps for viewing and copying files from a Macintosh. You can find details about each operation in the procedures that follow below. Note that you should also refer to the documentation that comes with your Macintosh for other information about USB connections, etc. IMPORTANT! • This camera does not support operation with a computer running Mac OS 8.6 or lower, or Mac OS X 10.0. If you have a Macintosh running Mac OS 9 or OS X (10.1, 10.2 or higher), use the standard USB driver that comes with your OS. 1. Use the USB cable to establish a connection between the camera and your Macintosh. 2. View and copy the images you want. 140 VIEWING IMAGES ON A COMPUTER 1. Connect the optional AC adaptor to the [DC IN IMPORTANT! 3V] connector of the camera, and then plug it in to a household power outlet. • You need the optional AC adaptor (AD-C30) in order to connect the camera to a computer using the USB cable. If you do not use the AC adaptor to power the camera, it will be powered only by its batteries, which creates the risk of sudden power failure during file transfer should batteries go low. Such power failure can cause corruption of camera memory and/or your memory card. • If you want to transfer files from the camera’s built-in memory to a computer, make sure there is no memory card loaded in the camera before you connect the USB cable. Terminal cover [DC IN 3V] AC adaptor AC power cord Plug 141 VIEWING IMAGES ON A COMPUTER 2. Turn on the camera. • Your Macintosh will see the camera’s file memory as a drive. 3. Connect the USB cable that comes bundled • The appearance of the drive icon depends on the Mac OS version you are using. with the camera to the camera and your computer’s USB port. USB port USB cable (bundled) • Take care when connecting the USB cable to the camera or your computer. USB ports and cable plugs are shaped for proper positioning. Connector (Mini-B) • Plug the USB cable plugs into the ports securely, as far as they will go. Proper operation is not possible if connections are not correct. [USB] 4. Double-click the drive icon for the camera’s Connector (A) file memory, the “DCIM” folder, and then the folder that contains the image you want. USB 5. Double-click the file that contains the image you want to view. • For information about file names, see “Memory Directory Structure” on page 146. 142 VIEWING IMAGES ON A COMPUTER 6. To copy all the files in file memory to your USB Connection Precautions Macintosh hard disk, drag the “DCIM” folder to the folder to which you want to copy it. • Be sure to connect the AC adaptor to the camera to supply power to the camera. • Do not leave the same image displayed on your computer screen for a long time. Doing so can cause the image to “burn in” on the screen. • Never disconnect the USB cable, or perform any camera operation while data communication is in progress. Doing so can cause data to become corrupted. IMPORTANT! • Never use your computer to edit, delete, move, or rename images stored in file memory. Doing so can cause problems with the image management data used by the camera, which may make it impossible to display images on the camera or it may cause a large error in the number of images value displayed by the camera. Always copy images to your computer memory before performing any edit, delete, move, or rename operation. 7. To terminate the USB connection, drag the drive icon that represents the camera to Trash. Next, disconnect the USB cable from the camera, and then turn off the camera. 143 VIEWING IMAGES ON A COMPUTER Operations You Can Perform from Your Computer Using a Memory Card to Transfer Images to a Computer The following are the operations you can perform while there is a USB connection between your camera and computer. See the referenced pages for more information about each operation. The procedures in this section describe how to transfer images from the camera to your computer using a memory card. Using a Computer with a Built-in SD Memory Card Slot Insert the SD memory card directly into the slot. • View images in album format .... See “Using the Album Feature” on page 148. Using a Computer with a Built-in PC Card Slot Use a commercially available PC card adapter (for an SD memory card/MMC). For full details, see the user documentation that comes with the PC card adapter and your computer. • Print images in album format .... See “Using the Album Feature” on page 148. • Automatically transfer images to your computer and manage images .... See “Installing the Software from the CD-ROM” on page 155 for information about installing Photo Loader. • Retouch images .... See “Installing the Software from the CD-ROM” on page 155 for information about installing Photohands. 144 VIEWING IMAGES ON A COMPUTER Using a Commercially Available SD Memory Card Reader/Writer See the user documentation that comes with the SD memory card reader/writer for details about how to use it. Memory Data Images recorded with this camera and other data are stored in memory using DCF (Design rule for Camera File System) protocol. DCF protocol is designed to make it easier to exchange image and other data between digital cameras and other devices. DCF Protocol DCF devices (digital cameras, printers, etc.) can exchange images with each other. DCF protocol defines camera format for image file data and the directory structure for file memory, so images can be viewed using another manufacturer’s DCF camera or printed on a DCF printer. Using a Commercially Available PC Card Reader/Writer and PC Card Adapter (for SD Memory Cards and MMCs) See the user documentation that comes with the PC card reader/writer and PC card adapter (for an SD memory card/ MMC) for details about how to use them. 145 VIEWING IMAGES ON A COMPUTER Memory Directory Structure ■ Folder and File Contents ■ Directory Structure • DCIM folder Folder that stores all of the digital camera files <¥DCIM¥> • Storage folder Folder for storing files created by the digital camera (DCIM Folder) 100CASIO CIMG0001.JPG CIMG0002.AVI (Storage folder) (Image file) (Movie file) ... • Image file File that contains an image recorded with the digital camera (File Name Extension: JPG) 101CASIO 102CASIO (Storage folder) (Storage folder) ... • Movie file File that contains a movie recorded with the digital camera (File Name Extension: AVI) ALBUM INDEX.HTM (Album folder) (Album HTML file) ... <¥FAVORITE¥>* CIMG0001.JPG CIMG0002.JPG • Album folder Folder that contains files used by the album function (FAVORITE folder) • Album HTML file File used by the album function (File Name Extension: HTM) (Storage file) (Storage file) ... <¥MISC¥> • FAVORITE folder Folder that contains Favorites image files (Image Size: 320 x 240 pixels) (DPOF file folder) AUTPRINT.MRK <¥SCENE¥>* (DPOF file) • DPOF file folder Folder that contains DPOF files (Best Shot folder) UQR40001.JPE UQR40002.JPE (User setup file) (User setup file) ... • Best Shot folder (Built-in memory only) Folder that contains Best Shot user setup files. • User setup files (Built-in memory only) Files that contain Best Shot user setups * These folders are created in built-in memory only. 146 VIEWING IMAGES ON A COMPUTER Image Files Supported by the Camera Built-in Memory and Memory Card Precautions • Image files recorded with the CASIO QV-R40 Digital Camera • DCF protocol image files • Note that the folder named “DCIM” is the parent (top) folder of all the files in memory. When transferring memory contents to a hard disk, CD-R, MO disk, or other external storage, treat all the contents inside a DCIM folder as a set and always keep them together. You can change the name of the DCIM folder on your computer. Changing the name to a date is a good way to keep track of multiple DCIM folders. However, if you even want to copy the folders back to the camera’s file memory, be sure you change the name of the DCIM folder back to “DCIM” first. The camera does not recognize any folder name other than DCIM. • We also strongly recommend that after transferring data from file memory to other external storage that you reformat the camera’s file memory and delete its contents before using it to store more files. Remember that formatting memory deletes all of its contents. Check to make sure that you no longer need any of the files in memory before you format it. Certain DCF functions may not be supported. When displaying an image recorded on another camera model, it may take a long time for the image to appear on the display. 147 USING THE CAMERA WITH A COMPUTER USING THE CAMERA WITH A COMPUTER The album feature of the camera creates files that make it possible for you to view images on your computer in a photo album layout. You can also use the applications contained on the CD-ROM that comes bundled with the camera to automate image transfer and to retouch images. • You can use the Web browser shown below to view or print the contents of an album. Note that to view a movie on a computer running Windows 2000 or 98, you need to install DirectX. Microsoft Internet Explorer Ver 5.5 or later Using the Album Feature Creating an album The album feature creates an HTML photo album layout that displays your images. You can use the HTML layout to post your images on a Web page, or for printing the images. 1. In the PLAY mode, press [] ( ). Sample layout 2. Use [] and [] to select “Create”, and then Album press [SET]. • This starts creation of the album, and causes the message “Busy....Please wait...” to appear on the monitor screen. • The PLAY mode screen reappears after creation of the album is complete. Index Info 148 USING THE CAMERA WITH A COMPUTER • Creating an album causes a file folder named “ALBUM”, which contains a file named “INDEX.HTM” plus other files to be created in camera memory or on the memory card. Selecting an Album Layout IMPORTANT! 1. In the PLAY mode, press [] ( You can select from among 10 different display layouts for an album. • Never open the battery compartment cover or remove the memory card from the camera while an album is being created. Doing so not only runs the risk of certain album files being skipped, it can also result in image data and other data in memory being corrupted. • If memory becomes full while an album is being created, the message “Memory Full” appears on the monitor screen and album creation is terminated. • Album creation will not be performed properly if the batteries go dead while album creation is in progress. • You can also configure the camera to create albums automatically (page 151). However, performing the above procedure creates an album regardless of whether automatic album creation is turned on or off. ). 2. Use [] and [] to select “Layout”. 3. Use [] and [] to select the layout you want. • Changing the layout causes the layout sample on the right side of the screen to change. IMPORTANT! • The sample layout shows the arrangement of items and the background color. It does not show whether the layout uses a list view or detailed view, or the current Image Type setting. 149 USING THE CAMERA WITH A COMPUTER Configuring Detailed Album Settings ■ Background Color 1. In the PLAY mode, press [] ( You can specify white, black, or gray as the color of the album background using the procedure under “Configuring Detailed Album Settings”. ). 2. Use [] and [] to select “Set Up”, and then press []. ■ Album Type 3. Use [] and [] to There are two album types: “Normal” and “Index/Info”. select the item whose setting you want to change, and then press []. “Normal” Type : This type of album displays images in accordance with the currently selected layout. “Index/Info” Type : In addition to the normal album screen, this type of album also includes thumbnails of images and detailed information about each image. • Details about each of the settings are provided in the following sections. 4. Use [] and [] to change the setting, and then press [SET]. 150 USING THE CAMERA WITH A COMPUTER ■ Image Use ■ Auto Album Creation On/Off This setting lets you select from among three different image uses, as described below. Select the image use that best suits the way you plan to use the image. This setting controls whether an album is created automatically whenever you turn off the camera. For this purpose: Select this setting: Smaller images for album browsing, Website thumbnails, or archiving on a CD-R or other media, with the full-size image displayed when a thumbnail is clicked • This setting can be used for browsing with the thumbnails. Clicking a thumbnail displays a larger version for viewing or printing. View Small image files only for album browsing, or uploading to a Website, etc. • This option displays only the small-file images (located in the camera’s “ALBUM” folder). Smaller files upload to the Internet faster. • You cannot enlarge images by clicking a thumbnail or play movies while this image is selected. WEB Printing (high resolution) • High-resolution images take longer to display on your computer screen. • You cannot enlarge images by clicking a thumbnail or play movies while this image is selected. Print To do this: Select this option: Turn on auto album creation On Turn off auto album creation Off • When auto album creation is turned on, an album is created automatically in built-in memory or on the memory card whenever you turn off the camera. IMPORTANT! • When you turn off the camera while auto album creation is turned on, the monitor screen turns off, but the operation lamp continues to flash for a few seconds to indicate that the album creation process is being performed. Never open the battery compartment cover or remove the memory card while the green operation lamp is flashing. 151 USING THE CAMERA WITH A COMPUTER NOTE Viewing Album Files • Depending on the number of images in memory, it can take quite a bit of time to complete auto album creation when you turn off the camera. If you do not plan to use the album feature, we suggest that you keep auto album creation turned off, which shortens the amount of time the camera takes to power down completely. You can view and print album files using your computer’s Web browser application. 1. Use your computer to access the data in builtin memory or on the memory card, or access a memory card with your computer (pages 135 and 146). 2. Open the built-in memory “ALBUM” folder or the memory card “ALBUM” folder, which is located inside the folder named “DCIM”. 3. Use your computer’s Index/Info Album Type Web browser to open the file named “INDEX.HTM”. • This displays a list of folders in built-in memory or on the memory card. Image 152 File Name USING THE CAMERA WITH A COMPUTER 4. If you created the album after selecting “Normal” type or “Index/Info” as the album type under “Configuring Detailed Album Settings” on page 150, you can click one of the following display options. Album : Displays an album created by the camera. Index : Displays a list of images stored in a folder. Info : Displays information about each image. Index • If “View” is selected for “Use” (page 151), you can double-click an image on your computer screen to display the full-size version. Info Album 153 USING THE CAMERA WITH A COMPUTER • The following describes the information that appears on the Info Screen. This Info Screen item: File Size Resolution Quality Drive mode AE Light metering Shutter speed Aperture stop Exposure comp Focusing mode Flash mode AF area Sharpness Saturation Contrast White balance Sensitivity Filter Enhancement Flash intensity Digital zoom World Date Model NOTES • When printing an album page, you should set up your Web browser as described below. — Select the browser frame where the images are located. — Set margins to the lowest possible values. — Set the background color to a printable color. • See the user documentation that came with your Web browser application for details about printing and configuring settings for printing. Shows this: Image file size Resolution Quality Drive mode Exposure mode Metering mode Shutter speed Aperture stop EV shift Focusing mode Flash mode Auto Focus area Sharpness Saturation Contrast White balance Sensitivity Filter setting Enhancement setting Flash intensity Digital zoom setting Location Recording date and time Camera model name 5. After you are finished viewing the album, exit your Web browser application. 154 USING THE CAMERA WITH A COMPUTER Saving an Album Installing the Software from the CD-ROM • To save an album, copy the “DCIM” folder from camera memory or the memory card to your computer’s hard disk, a CD-R, an MO disk, or some other storage medium. Note that copying only the “ALBUM” folder, does not copy image data and other necessary files. • After copying the “DCIM” folder, do not change or delete any of the files inside of it. Adding new images or deleting existing images may lead to abnormal album display. • If you plan to use a memory card again after saving its album, first delete all of its files or format it before loading it into the camera. • When you have “WEB” selected for the “Use” setting, the album shows only the smaller image files stored in the “ALBUM” folder. Such images can be uploaded to the Internet more quickly. About the bundled CD-ROM The CD-ROM that comes bundled with the camera contains the applications described below. Installation of these applications is optional, and you should install only the ones you want to use. USB Driver for Mass Storage (for Windows) This is the software that makes it possible for the camera to “talk” to your personal computer over a USB connection. If you are using Windows XP, do not install the USB driver from the CD-ROM. With these operating systems, you will be able to perform USB communication simply by connecting the camera to your computer with the USB cable. Photo Loader (for Windows/Macintosh) This application loads image data saved in JPEG and AVI format from a digital camera to your computer. Photohands (for Windows) This application is for retouching and printing image files. 155 USING THE CAMERA WITH A COMPUTER DirectX (for Windows) This software provides an extended tool set including a codec that allows Windows 98 and 2000 to handle movie files recorded using a digital camera. You do not need to install DirectX if you are running Windows XP or Me. Computer System Requirements Computer system requirements depend on each of the applications, as described below. Windows Acrobat Reader (for Windows) This is an application that lets you read PDF files. Use it to read the user documentation for the camera, Photo Loader, and Photohands, all of which is included on the bundled CD-ROM. See the “Readme” file on the bundled CD-ROM. Macintosh See the “readme” file on the bundled CD-ROM. NOTE • See the user documentation files (PDF) on the bundled CD-ROM for details about using Photo Loader and Photohands. See “Viewing User Documentation (PDF files)” on page 159 (Windows) and page 161 (Macintosh) of this manual for more information. 156 USING THE CAMERA WITH A COMPUTER Getting Started Installing Software from the CD-ROM in Windows Start up your computer and insert the CD-ROM into its CDROM drive. This will automatically launch the menu application, which displays a menu screen on your computer. Use the procedures in this section to install the software from the bundled CD-ROM to your computer. NOTE • The menu application may not start up automatically on some computers. If this happens, navigate to the CDROM and double-click “menu.exe” to launch the menu application. • If you already have one of the bundled applications installed on your computer, check its version. If the bundled version is newer than the one you have, you should install the newer version. The CD-ROM includes the software and user documentation for various languages. Check the CD-ROM menu screen to see if applications and user documentation are available for a particular language. Selecting a Language First select a language. Note that some software is not available in all languages. 1. On the menu screen, click the tab for the language you want. 157 USING THE CAMERA WITH A COMPUTER Viewing the Contents of the “Read me” File Installing an Application 1. Click the “Install” button for the application You should always read the “Read me” file for any application before installing it. The “Read me” file contains information you need to know when installing the application. you want to install. 2. Follow the instructions that appear on your computer screen. 1. Click the “Read me” button for the application IMPORTANT! you are going to install. • Be sure to follow the instructions carefully and completely. If you make a mistake when installing Photo Loader, you may not be able to browse your existing library information and HTML files that are created automatically by Photo Loader. In some cases, image files may be lost. • When using an operating system other than Windows XP, never connect the camera to your computer without installing the USB driver from the CD-ROM first. IMPORTANT! • Before upgrading or reinstalling Photo Loader, or before installing it onto another computer, be sure to read the “Read me” file for information about retaining existing libraries. 158 USING THE CAMERA WITH A COMPUTER Viewing User Documentation (PDF Files) User Registration 1. In the “Manual” area, click the name of the manual you want to read. You can perform user registration over the Internet. To do so, of course, you need to be able to connect to the Internet with your computer. IMPORTANT! 1. Click the “Register” button. • You need to have Adobe Acrobat Reader installed on your computer to read user documentation files. If you do not already have Adobe Acrobat Reader installed, you can install it from the bundled CDROM. • This starts up your Web browser and accesses the user registration website. Follow the instructions that appear on your computer screen to register. 2. After registering, terminate your connection to the Internet. Exiting the Menu Application 1. On the menu screen, click “Exit” to exit the menu. 159 USING THE CAMERA WITH A COMPUTER IMPORTANT! Installing Software from the CD-ROM on a Macintosh • If you are upgrading to the new version of Photo Loader from a previous version and you want to use library management data and HTML files created using the old version of Photo Loader, be sure to read the “Important” file in the “Photo Loader” folder. Follow the instructions in the file to use your existing library management files. Failure to follow this procedure correctly can result in loss or corruption of your existing files. Use the procedures in this section to install the software from the bundled CD-ROM to your computer. Installing Software Use the following procedures to install the software. ■ To install Photo Loader 1. Open the folder named “Photo Loader”. 2. Open the folder named “English”, and then open the file named “Important”. 3. Open the folder named “Installer”, and then open the file named “readme”. 4. Follow the instructions in the “readme” file to install Photo Loader. 160 USING THE CAMERA WITH A COMPUTER ■ To read the Photo Loader user’s guide Viewing User Documentation (PDF Files) To perform the following procedures, you must have Acrobat Reader installed on your Macintosh. You can download the latest version of Adobe Acrobat Reader by visiting the Adobe Systems website. 1. On the CD-ROM, open the “Manual” folder. 2. Open the “Photo Loader” folder and then open the “English” folder. ■ To view the camera user’s guide 3. Open “PhotoLoader_english”. 1. On the CD-ROM, open the “Manual” folder. ■ To register as a user 2. Open the “Digital Camera” folder, and then Internet registration only is supported. Visit the following CASIO website to register: http://world.casio.com/qv/register/ open the folder for the language whose user’s guide you want to view. 3. Open the file named “camera_xx.pdf”. • “xx” is the language code. 161 APPENDIX APPENDIX Menu Reference The following shows lists of menus that appear in the REC mode and PLAY mode, and their settings. • The settings that are underlined in the following table are initial defaults. ■ REC mode Saturation Low / Normal / High Contrast Flash Intensity Low / Normal / High Weak / Normal / Strong Grid Digital Zoom On / Off On / Off Review L/R Key On / Off REC Mode / EV shift / White Balance / ISO / Self-timer / Off ● REC tab menu REC Mode (Snapshot) / ● Memory tab menu (Best Shot) / Self-timer Size (Movie) 10 sec / 2 sec / X3 / Off 2304 x 1712 / 2240 x 1680 / 1600 x 1200 / Quality 1280 x 960 / 640 x 480 Fine / Normal / Economy EV Shift –2.0 / –1.7 / –1.3 / –1.0 / –0.7 / –0.3 / 0.0 / +0.3 / +0.7 / +1.0 / +1.3 / +1.7 / +2.0 White Balance Auto / (Sunlight) / (Shade) / (Light Bulb) / (Fluorescent) / Manual ISO AF Area Auto / ISO 80 / ISO 160 / ISO 320 Spot / Multi Metering Filter Multi / Center weighted / Spot Off / B/W / Sepia / Red / Green / Blue / Sharpness Yellow / Pink / Purple Soft / Normal / Hard 162 REC Mode Flash On / Off On / Off Focus White Balance On / Off On / Off ISO AF Area On / Off On / Off Metering Flash Intensity On / Off On / Off Digital Zoom MF Position On / Off On / Off APPENDIX ■ PLAY mode ● Set Up tab menu Beep Startup On / Off On (Selectable image) / Off File No. World Time Continue / Reset Home / World ● PLAY tab menu Home time setup (city, DST, etc.) World Time setup (city, DST, etc.) Date Style Adjust YY/MM/DD / DD/MM/YY / MM/DD/YY Time setting Language / English / Français / Deutsch / Español / Italiano / Português / / Sleep / 30 sec / 1 min / 2 min / Off Auto Power Off Format 2 min / 5 min Format / Cancel Reset Reset / Cancel 163 Calender – Favorites DPOF Show / Save / Cancel Select images / All images / Cancel Protect Rotation On / All Files : On / Cancel Rotate / Cancel Resize Trimming 1280 x 960 / 640 x 480 / Cancel – Alarm Copy Alarm setups Built-in Card / Card Built-in / Cancel APPENDIX ● Set Up tab menu Beep Startup On / Off On (Selectable image) / Off File No. World Time Continue / Reset Home / World Indicator Lamp Reference The camera has three indicator lamps: a green operation lamp, a red operation lamp, and a self-timer lamp. These lamps light and flash to indicate the current operational status of the camera. Home time setup (city, DST, etc.) World Time setup (city, DST, etc.) Date Style Adjust YY/MM/DD / DD/MM/YY / MM/DD/YY Time setting Language / English / Français / Deutsch / Español / Italiano / Português / / Sleep / 30 sec / 1 min / 2 min / Off Auto Power Off Format 2 min / 5 min Format / Cancel Reset Reset / Cancel Operation lamp Self-timer lamp Green Red * There are three lamp flash patterns. Pattern 1 flashes once per second, Pattern 2 flashes twice per second, and Pattern 3 flashes four times per second. The table below explains what each flash pattern indicates. 164 APPENDIX REC mode Operation Lamp Self-timer Operation Lamp Lamp Green Red Green Meaning Red Operational (Power on, recording Lit enabled) Flash is charging. Pattern 3 Lit Flash charging is complete. Auto Focus operation was successful. Lit Pattern 3 Lit Cannot Auto Focus. Monitor screen is off. Pattern 2 Pattern 1 Storing image Storing movie Pattern 1 Self-timer countdown (10 to 3 seconds) Pattern 2 Self-timer countdown (3 to 0 seconds) Pattern 1 Cannot charge flash. Memory card problem / Memory Pattern 2 card is unformatted. / Best Shot setup cannot be registered. Lit Self-timer Lamp Red Pattern 3 Meaning Red Pattern 3 Low battery alert Formatting card Pattern 3 Lit Powering down USB connection IMPORTANT! • When you are using a memory card, never remove the card from the camera while the green operation lamp is flashing. Doing so will cause recorded images to be lost. Memory card is locked. / Cannot create folder. / Memory is full. / Write error 165 APPENDIX PLAY mode Operation Lamp Green Red Self-timer Lamp The charger unit has a [CHARGE] lamp that lights or flashes in accordance with the charger unit operation that is being performed. Meaning Red Operational (Power on, recording Lit enabled) One of the following operations is [CHARGE] lamp being performed: delete, DPOF, image protect, copy, album creation, Pattern 3 Pattern 2 Lit Pattern 3 Lit Charger Unit [CHARGE] lamp Lit format, power down Memory card problem / Memory Unlit card is unformatted. Memory card is locked. / Cannot Pattern A Pattern B create folder. / Memory is full. Low battery alert Meaning Charging Charging complete Charging problem (Ambient temperature is too high or too low.) Charger unit or battery abnormality * There are two lamp flash patterns. Pattern A flashes once every 1.6 seconds, Pattern B flashes once every 0.4 second. USB connection 166 APPENDIX Troubleshooting Guide Symptom Image Recording Power Supply Power does not turn on. Possible Cause 1) The batteries are not oriented correctly. 2) The batteries are dead. 3) You are using the wrong type of AC adaptor. Action 1) Orient the batteries correctly (page 37). 2) Charge the batteries (page 33). If the batteries go dead soon after being charged, it means they have reached the end of their life and need to be replaced. Purchase separately available rechargeable nickel-metal hydride batteries (HR-3UA), or replace the batteries with other ones. 3) Use only the type of AC adaptor (AD-C30) specified for this camera. Camera suddenly powers down. 1) Auto Power Off activated (page 44). 2) The batteries are dead. 1) Turn power back on. 2) Charge or replace the batteries. Image is not recorded when the shutter release button is pressed. 1) The camera is in the PLAY mode. 2) Flash unit is being charged. 3) Memory is full. 1) Press [ ] (REC) to enter the REC mode. 2) Wait until the flash unit finishes charging. 3) Transfer files you want to keep to your computer and then delete files from image memory, or use a different memory card. 167 Image Recording APPENDIX Symptom Possible Cause Auto Focus does not focus properly 1) The lens is dirty. 2) The subject is not located in the center of the focus frame when you compose the image. 3) The subject you are shooting is a type that is not compatible with Auto Focus operation (page 65). 4) You are moving the camera. 1) Clean the lens. 2) Make sure the subject is centered in the focus frame when composing the image. 3) Use manual focus (page 68). The subject is out of focus in the recorded image. The image is not focused properly. When composing the image, make sure the subject on which you want to focus is located inside the focus frame. Camera powers down during self-timer countdown. The batteries are dead. Charge or replace the camera’s batteries. Monitor screen image is out of focus. 1) You are using the Manual Focus Mode and have not focused the image. 2) You are trying to use the Macro Mode when shooting a scenery or portrait shot. 3) You are trying to use Auto Focus or the Infinity Mode ( ) when shooting a close-up shot. 1) Focus the image (page 68). 1) Camera powers down before the save operation is complete. 2) Removing the memory card before the save operation is complete. , charge 1) When the battery indicator shows or replace the camera’s batteries. 2) Do not remove the memory card before the save operation is complete. Recorded images are not saved in memory. 168 Action 4) Mount the camera on a tripod. 2) Use Auto Focus for scenery and portrait shots. 3) Use the Macro Mode for close-ups. APPENDIX Possible Cause Action Sunlight or light from another source is shining directly into the lens during recording. Position the camera so sunlight does not shine directly into the lens. Images are not displayed. A memory card with non-DCF images recorded with another camera is loaded in the camera. This camera cannot display non-DCF images recorded onto a memory card using another digital camera. All buttons and switches are disabled. Circuit problem caused by electrostatic charge, impact, etc. while the camera was connected to another device. Remove the batteries from the camera, reinsert them, and then try again. Monitor screen is off. 1) USB communication is in progress. 1) After confirming that the computer is not accessing camera memory, disconnect the USB cable. 2) Press [DISP] to turn on the monitor screen. Other Playback Symptom Color of the playback image is different from the image on the monitor screen during recording. 2) The monitor screen is turned off (in a recording mode). Cannot transfer files over a USB connection. 1) USB cable is not connected securely. 2) USB driver is not installed. 3) Camera is turned off. 169 1) Check all connections. 2) Install the USB driver on your computer (page 135). 3) Turn on the camera. APPENDIX Display Messages Battery is low. The batteries are dead. Cannot register any more files • You are attempting to register a Best Shot setup when the “SCENE” folder already contains 999 setups. • You are attempting to register a FAVORITE file when the “FAVORITE” folder already contains 9999 files. Card ERROR Some problem occurred with the memory card. Turn off the camera, and remove and then reinsert the memory card. If the same message appears, format the memory card (page 131). IMPORTANT! Formatting the memory card deletes all files on the memory card. Before formatting, try transferring recoverable files to a computer or some other storage device. File could not be saved because battery is low. The batteries are dead, so the recorded image could not be saved. Folder cannot be created. This message appears when you try to record an image while there are 9,999 files stored in the 999th folder. If you want to record more files, delete files you no longer need (page 102). LENS ERROR If the lens comes into contact with some obstacle while it is extending, this message appears, the lens retracts, and the camera turns off. Take action to remove the obstacle, and try turning on power again. Memory Full Memory is full. If you want to record more files, delete files you no longer need (page 102). Printing Error One of the following problems occurred during printing. • Printer power off • Out of paper • Out of ink • Printer internal error Record Error Image compression could not be performed during image data storage for some reason. Record the image again. SYSTEM ERROR Your camera system is corrupted. Contact your retailer or a CASIO service center. The card is locked. The LOCK switch of the SD memory card is locked. You cannot store images to or delete images from a memory card that is locked. This card is not formatted. The memory card is not formatted. Format the memory card (page 131). 170 APPENDIX This function is not supported for this file. The function you are trying to perform is not supported for the file on which you are trying to perform it. There are no files. There are no files in built-in memory or on the memory card. Specifications Main Specifications Product: .............................. Digital Camera Model: ................................. QV-R40 There are no printing There are no DPOF settings specifying images and images. the number of copies of each for printing. Set up DPOF. Configure the required DPOF settings (page 106). This file cannot be played. The image file or audio file is corrupted, or is a type that cannot be displayed by this camera. This function cannot You attempted to copy files from built-in memory to be used. a memory card while there is no memory card loaded in the camera (page 130). ■ Camera Functions Image Files Format Snapshots: ...................... JPEG (Exif Ver.2.2); DCF (Design rule for Camera File system) 1.0 standard; DPOF compliant Movies: ............................ AVI (Motion JPEG) Recording Media: .............. 10 MB built-in Flash memory SD Memory Card MultiMediaCard Image Size Snapshots: ..................... 2304 2240 1600 1280 640 Movies: .............................. 320 171 x x x x x x 1712 1680 1200 960 480 240 pixels pixels pixels pixels pixels pixels APPENDIX Approximate Memory Capacity and File sizes: Delete: ................................. Single-file, all files (with protection) • Snapshots File Size (pixels) 2304 x 1712 2240 x 1680 1600 x 1200 (UXGA) 1280 x 960 (SXGA) 640 x 480 (VGA) Effective Pixels .................. 4.0 million Quality Fine Normal Economy Fine Normal Economy Fine Normal Economy Fine Normal Economy Fine Normal Economy Approximate Image File Size 1800 KB 1400 KB 1000 KB 1800 KB 1400 KB 1000 KB 1050 KB 710 KB 370 KB 680 KB 460 KB 250 KB 190 KB 140 KB 90 KB Built-in flash memory 10MB 4 shots 6 shots 8 shots 4 shots 6 shots 8 shots 8 shots 12 shots 24 shots 13 shots 20 shots 35 shots 46 shots 61 shots 98 shots SD Memory Card* 64MB 30 shots 40 shots 54 shots 30 shots 40 shots 54 shots 53 shots 79 shots 154 shots 82 shots 126 shots 220 shots 294 shots 386 shots 618 shots Imaging Element ................ 1/1.8-inch square pixel color CCD (Total pixels: 4.13 million) Lens/Focal Distance ......... F2.8 (W) to 4.9 (T); f= 8 (W) to 24mm (T) (equivalent to approximately 39 (W) to 117 (T) for 35mm film) Zoom: .................................. 3X optical zoom; 3.2X digital zoom (9.6X in combination with optical zoom) Focusing: ........................... Contrast-type Auto Focus (AF Mode (AF Area: Spot or Multi), Macro Mode), Infinity Mode; focus lock; manual focus Approximate Focus Range (from lens surface) Normal: ............................ 60 cm to ∞ (infinity) (2´ to ∞) Macro: ............................. 10 cm to 70 cm (3.9˝ to 27.6˝) In the Macro mode, the optical zoom range is 1x to 1.2x. Manual: ............................ Wide-angle: 10 cm to ∞ (infinity) (3.9˝ to ∞) Telephoto: 60 cm to ∞ (infinity) (23.6˝ to ∞) • Movies (320 x 240 pixels) Data Size Recording Time 150KB/second max. One Movie: 30 seconds maximum Total Movie Time: 60 seconds maximum (built-in memory) 410 seconds maximum (SD 64MB memory card)* Exposure Control Light Metering: ................ Multi-pattern center-weighted, spot by CCD Exposure: ........................ Program AE Exposure Compensation: ... –2EV to +2EV (1/3EV units) * Based on Matsushita Electric Industrial Co., Ltd. products. Capacity depends on card manufacturer. * To determine the number of images that can be stored on a memory card of a different capacity, multiply the capacities in the table by the appropriate value. 172 APPENDIX Shutter: ............................... CCD electronic shutter; mechanical shutter, 1/8 to 1/2000 second (Changes in accordance with recording mode and ISO sensitivity setting.) • Shutter speed is different for the following Best Shot scenes. Night Scene: 1 to 1/2000 second Fireworks: 2 seconds (fixed) World Time: ........................ City; Date; Time; Summer time; 162 cities in 32 time zones Input/Output Terminals: ... AC adaptor terminal (DC IN 3V) USB port (Mini-B) ■ Power Requirements Power Requirements: ....... Two AA-size lithium batteries Two AA-size rechargeable nickel-metal hydride batteries (HR-3UA) AC adaptor (AD-C30) Aperture: ............................ Wide-angle: F2.8/4.8, auto switching Telephoto: F4.9/8.4, auto switching White Balance: ................... Automatic, fixed (4 modes), manual switching Approximate Battery Life: Type of Operation Continuous Recording Continuous Playback Self-timer: ........................... 10 seconds, 2 seconds, Triple Selftimer Built-in Flash Flash Modes: ................... AUTO, ON, OFF, Red eye reduction Flash Range: ................... Wide Angle Optical Zoom: 0.4 to 2.9 meters (1.3´ to 9.5´) Telephoto Optical Zoom: 0.4 to 1.7 meters (1.3´ to 5.6´) (ISO Sensitivity: “Auto”) AA-size Ni-MH Batteries HR-3UA 220 shots (110 minutes) 230 minutes AA-size Lithium Batteries FR6 180 shots (90 minutes) 290 minutes • The above figures are approximations only. • The above guidelines are based on the following battery types: Rechargeable Nickel-Metal Hydride: HR-3UA SANYO Electric Co., Ltd. Lithium: Energizer • Battery life varies with brand. The values noted above are approximate values until power fails at normal temperature (23°C (73°F)). The above does not guarantee that you will be able to achieve this level of operation. Low temperatures shorten battery life (page 39). Recording Functions: ....... Snapshot; Best Shot; Movie Monitor Screen: ................. 1.6-inch TFT color LCD 84,960 pixels (354 x 240) Viewfinder: ......................... Monitor screen and optical viewfinder Power Consumption: ........ DC 3V Approximately 3.8 W Timekeeping Functions .... Built-in digital quartz clock Date and Time: ............... Recorded with image data Auto Calendar: ................ To 2049 Dimensions: ....................... 88 (W) x 60.5 (H) x 32.7 (D) mm (3.5˝ (W) x 2.4˝ (H) x 1.3˝ (D)) (excluding projections) 173 APPENDIX ■ Special battery charger unit (BC-5H) : Inlet Type Weight: ................................ Approximately 160 g (5.6 oz) (excluding batteries and accessories) Power Requirement .......... 100 to 240V AC, 0.08A, 50/60Hz Bundled Accessories: ...... Rechargeable nickel-metal hydride batteries (HR-3UA); Charger unit (BC5H); AC power cord; USB cable; Strap; CD-ROM; Basic Reference Output ................................. DC 1.2V, 550mA Charging Temperature ..... 0°C to 40°C (32°F to 104°F) Chargeable Battery type ... Rechargeable nickel-metal hydride batteries (HR-3UA) ■ Rechargeable nickel-metal hydride Battery (HR-3UA) Full Charge Times ............. Approximately 4 hours Rated Voltage: ................... 1.2 V Rated Capacitance: ........... 2000 mAh Dimensions ........................ 71 (W) x 75 (H) x 28 (D) mm (2.8˝ (W) x 30˝ (H) x 1.1˝ (D)) (excluding projections) Operating Temperature Range: ................................. 0°C to 40°C (32°F to 104°F) Weight ................................. Approximately 75 g (2.6 oz) Dimensions: ....................... 14.35 (diameter) x 50.4 (H) mm (0.56˝ (diameter) x 1.98˝ (H)) ■ Special battery charger unit (BC-5H) : Plug-in Type Weight: ................................ Approximately 29.0 g (1.0 oz) * Each battery Power Requirement .......... 100 to 240V AC, 0.08A, 50/60Hz Output ................................. DC 1.2V, 550mA Charging Temperature ..... 0°C to 40°C (32°F to 104°F) Chargeable Battery type ... Rechargeable nickel-metal hydride batteries (HR-3UA) Full Charge Times ............. Approximately 4 hours Dimensions ........................ 71 (W) x 75 (H) x 28 (D) mm (2.8˝ (W) x 3.0˝ (H) x 1.1˝ (D)) (excluding projections) Weight ................................. Approximately 77 g (2.7 oz) 174 APPENDIX Power Supply • Use only the special HR-3UA rechargeable nickel-metal hydride batteries to power this camera. Use of any other type of battery is not supported. • This camera does not have separate batteries for the clock. The date and time settings of the camera are cleared whenever power is totally cut off (from both the batteries and AC adaptor). Be sure to reconfigure these settings after power is interrupted (page 47). LCD Panel • The LCD panel is a product of the latest LCD manufacturing technology that provides a pixel yield of 99.99%. This means that less than 0.01% of the total pixels are defective (they do not turn on or always remain turned on). Lens • You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lens, and does not indicate malfunction of the camera. 175
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Modify Date : 2004:05:26 14:10:25+09:00 Create Date : 2003:08:21 15:54:30+09:00 Page Count : 59 Mod Date : 2004:05:26 14:10:25+09:00 Creation Date : 2003:08:21 15:54:30+09:00 Author : CASIO COMPUTER CO.,LTD. Producer : Acrobat Distiller 4.0.5 for Macintosh Metadata Date : 2004:05:26 14:10:25+09:00 Title : K864PCM1DKX-E Creator : CASIO COMPUTER CO.,LTD.EXIF Metadata provided by EXIF.tools