Casio Hs30W HS 30W

HS-30W HS30W

HS-30W to the manual 23bcc12c-c023-47c0-9b7b-89880810b49f

HS-30W HS30W_EN HS-30W | Timepieces (Clocks) | Manuals | CASIO

2014-07-05

: Casio Hs30W hs30w casio pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadCasio Hs30W HS-30W
Open PDF In BrowserView PDF
MA0510-EA

Operation Guide HS-30W
USING THE STOPWATCH

ILLUSTRATION
TIME DISPLAY

A signal confirms A and C button operations.

STOPWATCH DISPLAY

Working range
The total elapsed time and split time display is limited to 9 hours 59 minutes 59.99 seconds. Lap time display is
limited to 59 minutes 59.99 seconds.
Thereafter it will be reset and started again. The lap counter starts from 1 to 99 and repeats from 0.

Pressed down for a few
seconds to change between
12/24-hour formats.
Lap counter
Month

Year

Day of
the week

Day

Press

NORMAL TIME
Split time
Lap time

.

START

STOP

0

(a)

CHART

a

RESET

Seconds

PM

Hour
Minutes
Seconds

Hour

Total
elapsed time

BUTTON
OPERATION

1/100th of a second

DISPLAY

Minutes
• A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before using
the stopwatch.
• Depending on the stopwatch model, the configuration of your stopwatch may differ somewhat from that shown in
the illustration.

NET TIME

GENERAL GUIDE
Every time the B button is pressed, the display is switched between TIME and STOPWATCH displays.
STOPWATCH DISPLAY
A button ..... Starts and stops timing.
B button ..... Toggles between the current time and stopwatch screens.
C button ..... Registers a lap/split time.
R button ..... Recalls lap/split time records and total elapsed time.

STOP

START

STOP

0

(a)

(a)

(a + b)

a

b

(Loss time)

RESET

BUTTON
OPERATION

1ST SPLIT

SPLIT TIME AND LAP TIME
Split time (SPLIT) is the time
elapsed from the start to a
specific point.

START

CHART

2ND SPLIT

DISPLAY
3RD SPLIT

START

After stopping a net time operation by pressing A, you can resume it by pressing A again.

1ST LAP

Lap time (LAP) is the time
elapsed from one point to another
or for one lap around a track.

2ND LAP

LAP/SPLIT TIMES
3RD LAP

START

A maximum of 9 lap/split time records and total elapsed time are automatically stored into the memory, and
recalled by pressing the R button.
Once 9 lap/split time records are stored (counter shows a flashing value greater than 9), pressing C displays the
current lap/split time, but does not store it in memory.
START
1ST LAP

0

a

STOP
2ND LAP

(a)

b

RESET

3RD LAP

(a + b)

c

(a + b + c)

(t)

CHART
1ST SPLIT (a)
2ND SPLIT (a+b)
3RD SPLIT (a+b+c)

BUTTON
OPERATION

DISPLAY

1

Operation Guide HS-30W
Recording the Finishing Times of Multiple Runners
After pressing A to start timing, press C as each runner crosses the finish line. This records each of the finishing
times in memory, which you can recall by pressing the R button.
*Recorded times are retained in memory until you start a new net time operation (by pressing A) after clearing
the stopwatch screen to all zeros (by pressing C).
Example : To record the times of 10 different runners.
START

1ST RUNNER
FINISHES

2ND RUNNER
FINISHES

9TH RUNNER
FINISHES

10TH RUNNER
FINISHES

CHART

BUTTON
OPERATION
You can scroll through time records in memory by pressing
still running.

, even while the stopwatch is

Runner’s record

DISPLAY

Press

.

Runner’s finishing position

Difference between this runner’s record
and the previous runner’s record

SETTING TIME AND DATE
1) Press C for a few seconds in TIME display to set time and date.
2) Press A on a time signal to correct seconds.
3) Press C shift flashing digit (s). Digit(s) to be changed will flash.
SECONDS

HOUR
DAY OF THE WEEK

MINUTES

YEAR

DAY

MONTH

4) Each press of A increments digit. Keep pressed to move quickly.
5) Press B or C to complete setting.
*Year digits can be set up to the year 2029.

AUTO-retrieve function
Display automatically returns to TIME if left unused for a few minutes.

2

Navigation menu