Casio Id 15S

ID-15S ID15S_EA_EN ID-15S | Timepieces (Clocks) | Manuals | CASIO

: Casio Id-15S id-15s casio pdf

Open the PDF directly: View PDF .
Page Count: 3

Operation Guide ID-15S

1

MA1205-EA

ILLUSTRATION

©

2012 CASIO COMPUTER CO., LTD.

1cm

ALM/SNZ DEMO

MAX/MIN

ON

OFF

RESET SET

C/ F

SNZ

ALM/SNZ DEMO

MAX/MIN

ON

OFF

RESET SET

SNZ

ALM/SNZ DEMO

MAX/MIN

ON

OFF

RESET SET

C/ F

SNZ

ALM/SNZDEMO

MAX/MIN

ON

OFF

RESETSET

C/ F

SNZ

•A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the

clock.

•Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.

Current time

(Hour, minutes,

seconds)

Day of the week

Current temperature

Date

(month - day)

PM

indicator

Alarm time

Alarm on

indicator

Snooze on

indicator

Alarm Off Snooze Alarm On

GENERAL GUIDE

11

11

1ALM/SNZ button

Pressing this button while the alarm is sounding stops the alarm.

22

22

2DEMO button

Press this button to test the alarm sound.

33

33

3Alarm Mode selector

SNZ: Snooze alarm on

ON: Alarm on

OFF: Alarm off

44

44

4MAX/MIN button

Press this button to display the high and low temperature values.

55

55

5°C/°F button

Press this button to toggle the temperature units between Celsius and Fahrenheit.

66

66

6+ / – buttons

Use these buttons to change the alarm time or the setting that is flashing on the display.

77

77

7RESET button

Press this button to reset the clock after replacing its batteries.

88

88

8SET button

Use this button when setting the current time.

USING THE CLOCK

1. Press the SET button (8) to cycle through the setting screens as shown below.

12-hour/24-hour

Setting Screen

Time Setting ScreenMonth and Day

Setting Screen

Year Setting Screen

Normal Timekeeping Screen Contrast Setting Screen

2. While the screen you want is displayed, use the + and

– buttons (6) to change the flashing digits.

• Holding down + or – changes the flashing digits at

high speed.

• You can set the year in the range of 2000 to 2099.

The day of the week is set automatically in

accordance with the date setting.

• Pressing + or – while the Time Setting Screen is on

the display causes the seconds count to be reset to

00.

• Each press of + or – while the 12-hour/24-hour

Setting Screen is on the display toggles between

12-hour and 24-hour timekeeping.

• You can set the contrast level in the range of 1 to 10.

3. After making the settings you want, use the SET button (8) to display the Normal Timekeeping Screen.

• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display

for about three minutes without performing any operation.

ALM/SNZ DEMO

MAX/MIN

ON

OFF

RESET SET

C/ F

SNZ

Press – to

decrease

the flashing

digits.

Press + to

increase

the flashing

digits.

Operation Guide ID-15S

2

USING THE ALARM

The alarm sounds when the alarm time you set is

reached. You can also use the Alarm Mode selector (3)

to select the snooze alarm feature.

Setting the Alarm Time

Use the + and – buttons (6) to set the alarm time.

Pressing the + and – buttons (6) causes the alarm time

to appear in place of the date on the display.

•Holding down + or – changes the digits at high speed.

Turning the Alarm On and Off

Use the Alarm Mode selector (3) on the back of the clock to turn the alarm on and off, and to select the snooze

feature.

•The alarm time appears in place of the date on the display whenever the Alarm Mode selector (3) is set to ON

or SNZ.

•The volume of the alarm sound cycles through five levels as it sounds.

Stopping the Alarm

•When alarm is sounding, press the ALM/SNZ button (1) to stop it. When the snooze feature is turned on, the

alarm will sound again in about five minutes.

•To turn off the snooze feature, slide the Alarm Mode selector (3) to OFF.

Alarm Mode selector

OFF

Description

The alarm sounds at the preset time for one minute, and up to seven more times every

five minutes thereafter. Even if you stop the alarm by pressing the ALM/SNZ button

(1), the alarm sounds again about five minutes later.

•The indicator flashes on the display to indicate that the snooze feature is

activated.

The alarm sounds at the preset time for one minute.

The alarm does not sound.

SNZ

ON

THERMOMETER FUNCTIONS

•A built-in sensor measures temperature and shows the measured value on the display.

•The temperature display shows “LO” for temperatures below –19.9°C (–3.8°F) and “HI” for temperatures above

49.9°C (121.8°F).

•Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such

readings are actually outside the guaranteed temperature range of this clock.

Switching between Celsius and Fahrenheit

•Push the °C/°F button (5) to select either Celsius (°C) or Fahrenheit (°F).

•Switching between Celsius and Fahrenheit causes current high temperature and low temperature memory

contents to be cleared.

C/ F button (5)

Celsius ( C) Fahrenheit ( F)

C F

High Temperature and Low Temperature Memory

•The clock remembers the highest and lowest temperature readings for the current 24-hour day. Daily high and

low values are cleared each day at midnight.

Changing the Temperature Display Screen

•Each press of the MAX/MIN button (4) cycles between screens as illustrated below.

MAX/NIN button (4)MAX/NIN button (4)

MAX/NIN button (4)

Current temperature

High temperature Low temperature

Turning On Temperature Screen Auto Cycling

•Hold down the MAX/MIN button (4) for about one second. This will turn on temperature screen auto cycling,

which causes the screen contents to cycle as illustrated below at regular intervals.

Current temperature

High temperature Low temperature

•To turn off temperature screen auto cycling, press the MAX/MIN button (4).

ALM/SNZ DEMO

MAX/MIN

ON

OFF

RESET SET

SNZ

C/ F

Press

–

to

change the

alarm time

setting.

Press

+

to

change the

alarm time

setting.

Operation Guide ID-15S

3

BATTERY REPLACEMENT

Replace batteries whenever the display of the clock becomes dim and difficult to read.

1. Open the battery compartment cover as shown in the illustration.

2. Remove all of the old batteries.

3. Load a full set of new batteries. Make sure that their positive (+) and negative (–) ends face in the correct

directions. If you load batteries incorrectly, they can burst and damage the clock.

4. Press the RESET button (7). Be sure to press the RESET button (7) after replacing batteries.

5. Replace the battery compartment cover.

Battery precautions

•Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician

immediately.

•Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.

•Never mix old and new batteries, or batteries of different brands.

•Never charge the batteries that come with the clock.

•Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto

your skin.

•Replace the batteries at least once a year, even if the current batteries are working properly.

•The batteries that come with the clock lose some of their power during transport and storage.

SPECIFICATIONS

Accuracy at Normal Temperature: ±60 seconds a month

Calendar System: Auto-calendar pre-programmed from the year 2000 to 2099

Alarm: Daily Alarm, Snooze Alarm (7 repeats)

Thermometer Functions: Measuring range: –19.9°C to 49.9°C (–3.8°F to 121.8°F)

Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such

readings are actually outside the guaranteed temperature range of this clock.

High/Low Temperature Memory, Celsius (°C)/Fahrenheit (°F) switching

Temperature Sensor Precision: ±2°C (±4°F) in range of 0°C to 40°C (32°F to 104°F)

Other: 12/24-hour timekeeping

Battery: Two AA size batteries (Type: R6P)

Battery Life: Approximately 1 year