Casio Pq PQ40

PQ-40 PQ40_EN

PQ-40 to the manual b7960a9d-0c13-41a3-9d22-67a580f8a572

2014-07-05

: Casio Pq40 pq40 casio pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadCasio Pq PQ40
Open PDF In BrowserView PDF
USER’S GUIDE PQ-40
GENERAL GUIDE
1 Snooze/Light button
• Press to turn on the backlight for three or four seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 Alarm Time Set buttons
Use these buttons to set the alarm time or current time.
3 SET button
Use this button when setting the current time.
4 RESET button
Press to reset the clock after replacing batteries.
5 Alarm Switch
Use this switch to turn the alarm on and off, and to turn on the snooze alarm.

SETTING THE TIME
3) to cycle through the setting screens as shown below.
1. Press the SET button (3
Normal Timekeeping Screen

Press to close.

Front cover

Year Setting Screen

12-hour/24-hour Timekeeping Screen

• A sticker is affixed to the display of this clock when you purchase it. Be sure to remove the sticker before using
the clock.
• Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the
illustration.
• Open the front cover and swing it to the back of the clock as shown in the illustration. Do not apply excess force
to the cover when opening it.
Month and Day Setting Screen
Alarm Off

Time Setting Screen

Alarm On

Snooze on indicator
DATE (month - date)

PM indicator

Alarm time

Day of the week

Current time
(Hour, minutes, seconds)

Alarm on indicator

1

USER’S GUIDE PQ-40
2. While the screen you want is on the display, use the Alarm Time Set buttons (2
2) to change the digits that are
flashing.

• The alarm time appears in place of the date on the display whenever the alarm switch is set to ON or SNZ.
• The backlight also turns on for the first four seconds that the alarm sounds.
• The alarm sound changes over five levels as it sounds.

Stopping the Alarm
1) to stop it. When the snooze feature is turned on,
• When alarm is sounding, press the Snooze/Light button (1
the alarm will sound again in about five minutes.
5) to OFF.
• To turn off the snooze feature, slide the Alarm Switch (5
Press + to increase
the flashing digits.

Press – to decrease
the flashing digits.

USING THE LIGHT
1) turns on the light and illuminates the display for easy reading in the dark.
Pressing the Snooze/Light button (1

• Holding down + or – changes the flashing digits at high speed.
• You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with
the date setting.
• Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00.
• Each press of + or – while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour
and 24-hour timekeeping.
3) to display the Normal Timekeeping Screen.
3. After making the settings you want, use the SET button (3
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.

USING THE ALARM
The alarm sounds and the backlight turns on when the alarm time you set is reached. You can also use the Alarm
5) to select the snooze alarm feature.
Switch (5

Setting the Alarm Time
2) to set the alarm time.
Use the Alarm Time Set buttons (2
2) causes the alarm time to appear in place of the date on the display.
Pressing an Alarm Time Set button (2
Alarm Time

Press to change the alarm
time setting (–).

Important!
• Overuse of the light can shorten battery life.

BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and difficult to read.
1. Pressing down lightly on the battery compartment cover, slide it downwards and remove it.
2. Remove both old batteries.
3. Load new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you
load batteries incorrectly, they can burst and damage the clock.
4. Replace the battery compartment cover.
4). Be sure to press the RESET button (4
4) after replacing batteries.
5. Press the RESET button (4

Battery precautions
Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.
Replace the batteries at least once a year, even if the current batteries are working properly.
Never charge the batteries that come with the clock.
Should the batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
• The batteries that come with the clock lose some of their power during transport and storage.
• Never mix old and new batteries, or batteries of different brands.
•
•
•
•

Press to change the alarm
time setting (+).
Alarm Time Set buttons

• Holding down + or – changes the digits at high speed.

Turning the Alarm On and Off
5) on the side of the clock to turn the alarm on and off, and to select the snooze feature.
Use the Alarm Switch (5
Alarm Switch Setting
SNZ ON
Zz

( )

ALM ON

(
OFF

)

Description
The alarm sounds at the preset time for one
minute, and seven more times every five
minutes thereafter. Even if you stop the alarm
sound by pressing the Snooze/Light button
1), the alarm operation is performed again
(1
five minutes later.
• The indicator Zz flashes on the display to
indicate that the snooze feature is activated.
The alarm sounds at the preset time for one
minute.
The alarm does not sound.

2

Navigation menu