Cassia Networks X1000 Router User Manual V02

Download:
Mirror Download [FCC.gov]
Document ID	3430967
Application ID	QucMgdc2e/AZkyaDykxibg==
Document Description	User Manual V02
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	95.02kB (1187689 bits)
Date Submitted	2017-06-19 00:00:00
Date Available	2017-06-20 00:00:00
Creation Date	2016-12-13 19:52:43
Producing Software	Microsoft® Word 2016
Document Lastmod	2017-06-17 15:37:18
Document Title	User Manual V02
Document Creator	Microsoft® Word 2016
Document Author:	UI

DATA SHEET
Cassia X1000 Outdoor and Indoor
Enterprise Bluetooth Router
The Cassia X1000 is the world’s first long range
enterprise Bluetooth router that can be used in both
indoor and outdoor environments. It extends
Bluetooth’s range up to 1000 feet open space and
enables remote control of 22 Bluetooth low energy
devices without requiring any changes to the
Bluetooth end devices. The X1000 acts as an internet
gateway working with the Cassia Access Controller
for easy deployment and management.
The Cassia X1000 enterprise Bluetooth router can be
used in both indoor and outdoor environments,
supports POE and offers enhanced functionalities., It
can be attached to the pole or wall with an included
mounting kit or placed on a desktop or counter space.
It receives power from PoE via the uplink Ethernet
port. X1000 is fully weather proof, and is widely
deployed in school campus, sports field, stadiums,
manufacturing yards and large metropolitan areas.
X1000 Bluetooth router without changing their
Bluetooth end devices. In addition, Cassia offers the
ultimate device management solution called the
Cassia IoT Access Controller (AC). Solution providers
can use the AC to deploy and manage hundreds of
Cassia X1000 routers and thousands of their
connected devices from a single easy-to-use user
interface.
The X1000 has a built-in smart antenna array
designed specifically for Bluetooth. It also supports
Ethernet and 2.4GHz Wi-Fi. The X1000 is a first of its
kind enterprise Bluetooth router capable of
extending Bluetooth’s range up to 1000 feet in open
space and expanding the number of devices that can
be paired and connected to 22 Bluetooth low energy
devices, or listening to potentially hundreds of
devices at the same time when operating in
broadcast mode. The X1000 can be used as a protocol
gateway, which translates between Bluetooth
protocol and IP protocol. This enables Internet access
to your Bluetooth low energy devices from a remote
location.
UNIQUE BENEFITS
The Cassia SDK allows our partners to connect their
proprietary Bluetooth low energy devices to the
Seamless Bluetooth Coverage
With smart antenna and RF management technology,
the X1000 can deliver stable Bluetooth coverage of
1000+ feet open air. This capability allows partners to
deploy seamless Bluetooth coverage indoor and out.
Remote Access and Control
The X1000 connects your Bluetooth low energy
devices that are within its coverage to your LAN or
Internet, assigns them into groups, and allows them
to be controlled remotely.
Easy Integration (SDK)
By simply integrating the Cassia SDK into a native
mobile app or cloud server, partners can use the
extended range and routing capabilities of the X1000
DATA SHEET
Cassia X1000 Outdoor and Indoor Bluetooth Router
without requiring any changes to the Bluetooth end
devices.
Easy Deployment and Management
The X1000 is setup and managed by the Cassia IoT AC.
Administrators can quickly deploy and check the
status of all Bluetooth devices in their network
(routers, sensors, bandwidth, battery life, device
location, and more).
Location Tracking
Together with the Cassia AC, the X1000 can track and
report location of the Bluetooth low energy devices
within its coverage, providing geolocation data in real
time.
ADVANCED FEATURES
RADIO FREQUENCY
The Cassia X1000 supports and follows the Bluetooth
4.0 standards.
 Working frequency: ISM band 2.402 ~
2.480GHz
 Duplex mode: full duplex, time division
duplex (TDD)
MULTIPLE ROLES
The Cassia X1000 supports broadcaster, listener,
sender and receiver roles, and can play multiple roles
simultaneously.
OTHER INTERFACES
 Reset button: Factory reset
 Visual indicator (LED): Power/System
 USB 2.0 (can be used for 3G/4G dongle)
 Uplink: 10/100 BASE-T Ethernet (RJ-45)
LOCATIONING
 Use with the Cassia AC to report location of
Bluetooth low energy devices
MECHANICAL
 Dimensions/weight: 
- 154 mm (BD) x 143mm (TD) x 259mm (H) 
- Weight: 1.5 lbs.
NETWORKING CONNECTIONS
 Integrated Wi-Fi on 802.11b/g/n (2.4GHz)
 10/100 BASE-T Ethernet support
ENVIRONMENTAL
 Operating:
- Temperature: -40 to 65°C (-40 to 149°F)
- Humidity: 0% to 90% non-condensing
•
Storage and transportation:
- Temperature: -50° C to +70° C (-58° F to +158° F)
 Wind resistance:
- Up to 85-MPH sustained winds
- Up to 135-MPH wind gusts
MOUNTING
 Mount kit to attach the router to the wall or
pole is included
CERTIFICATION
 FCC (US), IC (Canada), CE (Europe), BQB, SRRC
(China)
POWER INTERFACE
 Power over Ethernet: 802.3af/at compliant
source
WARRANTY
 1-year limited warranty
SECURITY SERVICES
 Support Bluetooth 4.0 security standards
 Support FIPS wireless standards
 Advanced military grade 128bit AES
encryption
CASSIA NETWORKS, INC. | 97 E. BROKAW RD., SUITE 130-A/B, SAN JOSE, CA 95112 | SUPPORT@CASSIANETWORKS.COM
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to
only Mobile Configurations. The antennas used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter.”
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si
le brouillage est susceptible d’en compromettre le fonctionnement
This radio transmitter (IC: 22505-X1000 ) has been approved by Industry Canada
to operate with the antenna types listed below with the maximum permissible gain
indicated. Antenna types not included in this list below, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 22505-X1000 ) a été approuvé par Industrie Canada pour
fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible
maximal. Les types d’antenne non inclus dans cette liste ci-dessous et dont le gain est
supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de
l’émetteur.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec
un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
109

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : UI
Create Date                     : 2016:12:13 19:52:43-08:00
Modify Date                     : 2017:06:17 15:37:18+08:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Producer                        : Microsoft® Word 2016
Format                          : application/pdf
Creator                         : UI
Creator Tool                    : Microsoft® Word 2016
Metadata Date                   : 2016:12:13 20:11:10-08:00
Document ID                     : uuid:2468664F-6B25-4FBD-BB30-FD2DCEB899B9
Instance ID                     : uuid:c841a9b3-5c89-4804-9314-ff39e24ab7a7
Page Count                      : 4

EXIF Metadata provided by EXIF.tools