CastleNet Technology CBV383Z2 Cable Modem User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2521804
Application ID	Y6hYAhglSPb5tpWimy896Q==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.59kB (294839 bits)
Date Submitted	2015-02-03 00:00:00
Date Available	2015-02-04 00:00:00
Creation Date	2015-01-15 14:37:29
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2015-01-15 14:37:29
Document Title	Microsoft Word - Generic CBV383Z2 single band QIG
Document Creator	PScript5.dll Version 5.2.2
Document Author:	KenSu

CBV383Z2 Cable Modem Quick Installation Guide
Package Contents



CBV383Z2 cable modem * 1
Quick Installation Guide * 1
RJ-45 CAT 5 cable * 1


12 V/1.5 A Power Adaptor * 1
6P4C Telephone cord * 1
Rear Panel and Hardware Connection
This chapter describes the proper steps for connecting your cable modem. Please be sure to
follow the steps in the sequence outlined below. Failure to do so could result in improper
operation or failure of your cable modem.
Step 5 Adjust the Antenna
Step 3 Connecting the
Telephone cord
Step 2 Connecting to a
Network Interface Cord
Step 1 Connecting
the Coaxial Cable
Step 4 Connecting
to the AC Adapter
Step 1:
Connect a cable by feeding the F-connector on the back of the cable modem. Ensure the
center conductor of the 75 ohm coaxial cable is inserted directly into the center of the
F-connector. Secure the coaxial cable by carefully threading the outer shell of the coaxial
cable connector onto the F-connector in a clockwise direction until tight. Be careful not to
over-tighten the connector or you may damage either the connector or the cable modem.
Step2: Connect the cable modem to an GbE Ethernet 10/100/1000 Mbps Network using a
RJ-45 male-terminated Ethernet cable. This cable modem equips with four Ethernet ports,
you can connect two PCs to the cable modem at the same time if necessary.
Step 3: Connect the telephone sets to TEL. Use RJ-11 telephone line to connect TEL port on
the cable modem and telephone socket on telephone
Step 4: Connect the AC Adapter to the cable modem by inserting the barrel-shaped
connector into the mating power connector on the back of the cable modem. Exercise
carefully to ensure the connectors are properly aligned prior to insertion and ensure the two
connectors engage completely. The cable modem is shipped with an AC adapter.
Remember to use only power adapter that came with the cable modem. Other power
adapters might have voltages that are not correct for your particular cable
modem. Using a power adapter with the wrong voltage can damage the cable modem.
Step 5: Adjust the antenna if necessary.
CBV383Z2 Cable Modem Quick Installation Guide
Front Panel & LEDs
There are nine Light-Emitting-Diodes (LEDs) located on the
front panel top provide status information to the user.
CBV383Z2 Cable Modem Quick Installation Guide
Accessing the Web Management
For easy-changing the default settings, a Web-based GUI is built-in for your access.
Use the following procedures to login to your CBV383Z2.
1. Open your web browser. Type the default IP address of the CBV383Z2 (e.g.
http://192.168.0.1) and press Enter.
CBV383Z2 Cable Modem Quick Installation Guide
Configuring Your WAN Connection
The DHCP page allows you to activate/deactivate the DHCP server function of the
CBV383Z2, and, if the DHCP server is activated, to see DHCP leases it has provided.
Enable CBV383Z2’s DHCP server to
allocate IP address to the connected
LAN client (PC) and configure the
Starting Local Address to be issued.
You can also set the maximum number
of PCs to which the CBV383Z2 will issue
IP addresses and the release time (in
second).
Check your CBV383Z2 Access Information
There is a label pasted to the bottom of CBV383Z2 case. In that label, you can obtain
CBV383Z2 Cable Modem Quick Installation Guide
following information. Pls note, following label is just an example, each CBV383Z2 has their
own label and setting value. Pls follow your label information to access and configure
CBV383Z2. In normal case, you don’t need to change anything, all setting have been set
and work properly.
SSID:
CBV383Z2_8C9D
WPA2-PSK(TKIP+AES)
Web Management:
http://192.168.0.1
login: admin
password: password
SSID: This is used for your CBV383Z2 wireless setting use, and, this setting has already
been set to your CBV383Z2.
WPA Pre-Shared Key: This is the password for your wireless client when connecting to
CBV383Z2. You will be asked to key in this password so as to
connect via wireless connection.
Web Management: This is the URL when you like to access to CBV383Z2. You can simply
type
http://192.168.0.1 in Microsoft Internet Explorer or any other internet
browser to access CBV383Z2 web management page.
Login: This is the value when accessing CBV383Z2 web management page. You will be
asked to key in this default value to access CBV383Z2.
Password: This is the value when accessing CBV383Z2 web management page. You will
be asked to key in this default value to access CBV383Z2.
CBV383Z2 Cable Modem Quick Installation Guide
FCC Statement
This device complies with Class B Part 15 of the FCC Rules. The device generates, uses
and can radiate radio frequency energy and, if not installed and used as instructed, may
cause harmful interference to radio communication. Only Coaxial cables are to be used with
this device in order to ensure compliance with FCC emissions limits. Accessories connected
to this device by the user must comply with FCC Class B limits. The manufacturer is not
responsible for any interference which results from use of improper cables, or which results
from unauthorized changes or modifications to the device. "A Minimum 26 AWG Line Core
should be used for connection to the cable modem"
Warranty
Items sold by manufacturer/distributor/agent, hereinafter called "Seller", are warranted only
as follows: Except as noted below Seller will correct, either by repair or replacement at its
option, any defect of material or workmanship which develops within one year after delivery
of the item to the original Buyer provided that evaluation and inspection by Seller discloses
that such defect developed under normal and proper use. Repaired or replaced items will be
further warranted for the unexpired term of their original warranty. All items claimed defective
must be returned to Seller, transportation charges prepaid, and will be returned to the Buyer
with transportation charges collect unless evaluation proves the item to be defective and that
the Seller is responsible for the defect. In that case, Seller will return to Buyer with
transportation charge prepaid. Seller may elect to evaluate and repair defective items at the
Buyer's site. Seller may charge Buyer a fee (including travel expenses, if needed) to cover
the cost of evaluation if the evaluation shows that the items are not defective or that they are
defective for reasons beyond the scope of this warranty.
The Seller makes no warranty concerning components or accessories not manufactured by
it. However, in the event of failure of such a part, Seller will give reasonable assistance to
Buyer in obtaining from the manufacturer whatever adjustment is reasonable in light of the
manufacturer's own warranty.
Seller will not assume expense or liability for repairs made outside the factory by other than
Seller's employees without Seller's written consent.
SELLER IS NOT RESPONSIBLE FOR DAMAGE TO ANY ASSOCIATED EQUIPMENT,
NOR WILL SELLER BE HELD LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR OTHER
DAMAGES. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED
OR IMPLIED INCLUDING THE IMPLIED WARRANTY OF "MERCHANTABILITY" AND
"FITNESS FOR PARTICULAR PURPOSE."
Trademarks
All trademarks are the property of their respective owners.
CBV383Z2 Cable Modem Quick Installation Guide
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Non-modification Statement:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Limited Channels fixed for use in the US:
IEEE 802.11b or 802.11g or 802.11n(HT20) operation of this product in the U.S. is
firmware-limited to Channel 1 through 11. IEEE 802.11n(HT40) operation of this product in
the U.S. is firmware-limited to Channel 3 through 9.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : KenSu
Create Date                     : 2015:01:15 14:37:29+08:00
Modify Date                     : 2015:01:15 14:37:29+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : KenSu
Title                           : Microsoft Word - Generic  CBV383Z2  single band QIG
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:b075de23-f9e3-47e5-89f2-6e97f486dcb9
Instance ID                     : uuid:8c49e450-a1b5-4b3c-b693-fe22b380ea84
Page Count                      : 7

EXIF Metadata provided by EXIF.tools