Caterpillar A1S1 Caterpillar CATBTFOB User Manual Exhibit D Users Manual per 2 1033 b3

Download:
Mirror Download [FCC.gov]
Document ID	3154596
Application ID	JwFikEfDCy5Fs2hyQx2P8g==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.13kB (226606 bits)
Date Submitted	2016-10-03 00:00:00
Date Available	2016-10-03 00:00:00
Creation Date	2016-09-28 10:04:15
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-09-28 10:04:15
Document Title	Microsoft Word - CATBTFOB Special Instruction_2016-Sep-15
Document Creator	PScript5.dll Version 5.2.2
Document Author:	decrowder

15 September 2016
Special Instruction
Industry Canada Notice to Users
Installation Guidelines for the
Cat ® Bluetooth Fob
This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the
following two conditions:
SMCS Code:
1. This device may not cause interference, and 2.
This device must accept any interference received,
including interference that may cause undesired
operation of the device.
Table of Contents
Introduction ..................................................................... 1
FCC Notice ...................................................................... 1
Industry Canada Notice to Users ................................. 1
Cat Bluetooth Fob Overview ........................................ 1
Specifications.................................................................. 2
Technical Specifications ............................................ 2
Enclosure Dimensions ............................................... 2
Physical Specifications .............................................. 3
Battery ............................................................................ 3
Battery Replacement Guidelines ............................. 3
Handling and Radio Frequency Guidelines ............ 3
Safety Hazard Warnings and Disposal for
Manganese Dioxide Lithium Batteries .................. 3
Cat Bluetooth FOB Overview
Introduction
Illustration 1
This Special Instruction covers the installation
guidelines for the Cat ® Bluetooth FOB (Cat BTFOB).
Do not perform any procedure in this Special
Instruction until you have read the information and
you understand the information.
The CAT Bluetooth Fob uses Bluetooth Low Energy
technology to enable Operator Identification upon entry
into a machine cab. The CAT Key Fob periodically
transmits Bluetooth packets with unique identifier
information when activated by motion. The packets are
picked up by a receiving device on the machine and are
then sent over to a Machine Control ECM, enabling
Operator Identification or Machine System Security.
FCC Notice
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
and 2. This device must accept any interference
received, including interference that may cause
undesired operation.
Enclosure Dimensions (mm)
Specifications
Technical Specifications
Input Voltage
Table 1
Battery
Coin Cell CR2450
Battery Chemistry
Manganese Dioxide Lithium
Battery Manufacturer
Panasonic
Battery Nominal Voltage
3V
Bluetooth Communication
Transmit Frequency
2.400 GHz to 2.480 GHz
Transmit Output Power (max)
0 dBM (1 mW)
Antenna
PCB Trace - Monopole
Antenna Pattern
Omnidirectional
Antenna Linear Average Gain
-1 dBi
Antenna Peak Gain
2.7dBi
Passive RFID Transponder (Read Only)
Global Compliance
ISO/IEC 11784 and 11785
Illustration 2
Current Consumption (max)
Sleep Mode
5µA
Max Average
Current
1mA
Environment
Operating Temperature
Table 2
−30° C (−22° F) to 60° C
(140° F)
Physical Specifications
Enclosure Material
PPE+PA
Storage Temperature (battery
removed)
−50° C (−58° F) to 85° C
(185° F)
Material Flammability Rating
UL-94 HB @ 1.5mm
Sealing
IP67
Dimensions (LxWxH)
Humidity
90% RH
69.4 mm ( 2.73 inch) x 33.8 mm
(1.33 inch) x 13.75 mm (0.54
inch)
Vibration
4.41 Grms
Opening feature
Coin-sized slot for prying open
the two-piece housing
Battery
Handling and Radio Frequency
Guidelines
Ensure that the following guidelines are met when
handling the Cat BTFOB
• After inserting the Cat BTFOB into the machine
door key slot or the ignition, do not apply more
than 0.82 N-m of force when turning the key
clockwise or counterclockwise inside of the key
slot.
• For machines with key switch ignition, do not
remove the Cat BTFOB from the key switch
during machine operation. This ensures the
engine stays on as well as ensuring reliable
wireless transfer data from the key fob to the
transceiver.
• For machines with Push to Start capability, do
not move the Cat BTFOB more than 1 m (3.3
ft) away from the key switch during machine
operation. This ensures reliable wireless
transfer of operator ID data from the key fob to
the transceiver.
Illustration 3
Battery Replacement Guidelines
Opening the Enclosure
Note: The 1 m (3.3 ft) distance requirement is due to
the controlled range of the key fob.
Find the opening feature on the housing by locating
the slot in the housing next to the hex-shaped metal
key ring
• Ensure that the radio frequency propagation is not
inhibited. Do not fully enclose the Cat BTFOB in
metal such as a metallic lunch box.
Use a coin to assist with the opening of the two-piece
housing. Once loosened, pull apart one side of the
housing from the other to expose the battery.
• It is recommended to not keep the key in back
pants pocket while sitting in the cab.
Note: The slot is designed for a coin the size of a
U.S. dime or penny.
Safety Hazard Warnings and Disposal
for Manganese Dioxide Lithium
Batteries
After the battery is fully exposed, remove the battery
by hand and dispose of in accordance with all
applicable federal, state, and local regulations.
Replace the used battery with a new CR2450, align
the enclosures back together, and press together
the housing until it snaps together. Check that the
spacing is even on all sides of the housing.
Ensure that the following guidelines are met when
handling the Cat BTFOB
•
Do not crush, short, charge incinerate or
deform battery. Keep away from
children. Replacing batteries use only
CR2450 batteries complying EN60086-4 or
UL1642
•
LiMnO2 batteries are not hazardous waste
per the United States Resource Conservation
and Recovery Act(RCRA) - 40 CFR Part 261
Subpart C. Dispose of in accordance with all
applicable federal, state and local regulations.
4
5
©2016 Caterpillar
All Rights Reserved
15 September 2016
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow”, and the POWER EDGE trade
dress as well as corporate and product identity used herein, are trademarks of Caterpillar and
may not be used without permission.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : decrowder
Create Date                     : 2016:09:28 10:04:15-05:00
Modify Date                     : 2016:09:28 10:04:15-05:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - CATBTFOB Special Instruction_2016-Sep-15
Creator                         : decrowder
Document ID                     : uuid:7a27f15d-aa02-4a88-916c-9e0b6b4a0c36
Instance ID                     : uuid:e8119c6b-d1f6-42cb-948e-2a02926f76e9
Page Count                      : 6

EXIF Metadata provided by EXIF.tools