Cattron North America 9116 Tag Reader System User Manual

Laird Controls North America Inc. Tag Reader System

User Manual

Download: Cattron North America 9116 Tag Reader System User Manual
Mirror Download [FCC.gov]Cattron North America 9116 Tag Reader System User Manual
Document ID1402118
Application IDYP9JjxAyz6AsqXkG67dFew==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.5kB (118709 bits)
Date Submitted2011-01-10 00:00:00
Date Available2011-01-13 00:00:00
Creation Date2011-01-06 09:21:30
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2011-01-06 09:21:47
Document TitleUser Manual
Document CreatorAcrobat PDFMaker 6.0 for Word
Document Author: hlepage

Transponder Reader System Verification Procedure
Document p/n: 9M06-9116-A001
CONFIDENTIALITY NOTICE
The information contained in this document is the exclusive, confidential and proprietary property of Cattron-Theimeg
Inc. It is not to be reproduced, nor is it or any portion of it to be used by or disclosed to any other individual or legal
entity, without the prior, written approval of Cattron-Theimeg Inc. Furthermore, the information contained within this
document is also to be handled in accordance with any and all confidentiality agreements between Cattron-Theimeg
Inc. and the user of this information.
© 2010 Cattron-Theimeg Inc.
Error! Reference source not found.-9116-A001
Document p/n:
Revision History
Date
Revision
Description
Signature / Date
12/3/10
A1
Initial Version
Prepared
D Stagg
Verified
Approved
Prepared
Verified
Approved
Prepared
Verified
Approved
Mm/dd/yy
Prepared
Verified
Approved
Mm/dd/yy
Prepared
Verified
Approved
Mm/dd/yy
Prepared
Verified
Approved
Mm/dd/yy
Prepared
Verified
Approved
Mm/dd/yy
Prepared
Verified
Approved
Mm/dd/yy
Prepared
Verified
Approved
Mm/dd/yy
Prepared
Verified
Approved
Cattron Group International
Proprietary and Confidential
Page ii
Error! Reference source not found.-9116-A001
Document p/n:
Table of Contents
Introduction
1-1
1.1
Purpose
1-1
1.2
Scope
1-1
1.3
Applicability
1-1
1.4
Overview
1-1
1.5
Cautions and Warnings
1-1
Test Procedure
2.1
Required Material
2.1.1
Documents
2.1.2
Equipment
2.2
Test Procedure Steps
2.2.1
Installation Verification
2.2.2
Power Verification
2.2.3
Antenna Signal Verification
2.2.4
Test Transponder Verification
2.3
Troubleshooting Tips
2.3.1
Power Verification
2.3.2
Antenna Signal Verification
Cattron Group International
Proprietary and Confidential
Page iii
Error! Reference source not found.-9116-A001
Introduction
1.1
Purpose
This document provides instructions for testing (qualifying) an installed Transponder Tag Reader System.
This includes the testing of the cables and equipment for the locomotive associated with the Pull Back
Protection System.
1.2
Scope
This procedure describes a series of tests that are sufficient for making sure the locomotive components
associated with the Pull Back Protection System are well integrated together and functioning properly.
1.3
Applicability
This document applies to 2OPT-9116-Annn Transponder Reader Systems.
1.4
Overview
This document includes a test procedure section that describes the required material and test procedure steps
to qualify a newly installed Transponder Tag Reader and Antenna. The installation is very simple and there is
no user adjustment required.
1.5
Cautions and Warnings
According to the requirements of FCC 15,21;
Users are cautioned that changes or modifications to this equipment are expressly prohibited
and could void the user's authority to operate the equipment.
According to the requirements of IC;
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Cattron Group International
Proprietary and Confidential
Page 1-1
Cattron Group International
Test Procedure
2.1 Required Material
The material listed below is required to perform the validation test of the Transponder Reader
System.
2.1.1
2.1.2
Documents
•
Reader
•
Antenna
•
Connecting Cable
•
Test Transponder
Equipment
2.1.2.1 Multi-meter
2/6
Cattron Group International
2.2 Test Procedure Steps
2.2.1
Installation Verification
2.2.1.1 Ensure that all cables are secured and connected properly.
2.2.2
Power Verification
2.2.2.1
Power on the System
2.2.2.2
Check the power (Yellow LED) on the Transponder Reader. The LED
should be on continuously when 72VDC is supplied to the Reader.
2.2.3
Antenna Signal Verification
2.2.3.1 Check the (Green LED) antenna signal going to the Transponder Reader.
The LED should be on continuously to indicate that the 200Khz signal is
being received from the Transponder Antenna.
2.2.4
Test Transponder Verification
2.2.4.1 Check the (Red LED) antenna signal going to the Transponder Reader.
The LED should flash once every 15 seconds when 72VDC is supplied to
the Reader.
2.3 Troubleshooting Tips
2.3.1
Power Verification
2.3.1.1 If the power LED (Yellow LED) on the Transponder Reader is not lit,
verify first that all connection points for the power cable are secure.
2.3.1.2 Also, verify that the power termination points are connected to the MCC
terminal blocks.
2.3.2
Antenna Signal Verification
2.3.2.1 If the antenna signal LED (Green LED) on the Transponder Reader is not
lit, verify that all connection points for the antenna cable are secure.
3/6

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:3be84f29-7518-4358-97a1-c8ce585773ca
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Company                         :  Cattron Group International
Source Modified                 : D:20110105212810
Headline                        : 
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2011:01:06 09:21:47-05:00
Create Date                     : 2011:01:06 09:21:30-05:00
Metadata Date                   : 2011:01:06 09:21:47-05:00
Document ID                     : uuid:a79a5dfd-06de-4d00-bbf3-72cd1c4610f5
Version ID                      : 5
Format                          : application/pdf
Title                           : 
Creator                         : hlepage
Subject                         : 
Tagged PDF                      : Yes
Author                          : hlepage
EXIF Metadata provided by EXIF.tools
FCC ID Filing: CN29116

Navigation menu