Elation Cuepix Blinder Ww2 Photometric Report Tool_FloodReportPE User Manual

Elation Cuepix Blinder Ww2 Photometric Report elation_cuepix_blinder_ww2_photometric__report elation_cuepix_blinder_ww2_photometric__report binaries

Elation Cuepix Blinder Ww2 Photometric Report elation_cuepix_blinder_ww2_photometric__report elation_cuepix_blinder_ww2_photometric__report 9941 ItemRelatedFilesLinksList cdb 3:

2017-04-03

User Manual: Cdb Elation Cuepix Blinder Ww2 Photometric Report elation_cuepix_blinder_ww2_photometric__report 9941 ItemRelatedFiles

Open the PDF directly: View PDF PDF.
Page Count: 8

8165 E Kaiser Blvd. Anaheim, CA 92808
p. 714.282.2270
f. 714.676.5558
Test#:L10137601
Date:11/7/2013
NVLAPLABCODE200927‐0
Test:
11/5/13
ANSI C82.77:2002: Harmonic Emission Limits-Related Quality Requirements for Lighting Equipment
Client submitted the sample. Fixture catalog number is cuepix blinder .
Received in working and undamaged condition. No modifications were
necessary.
TestingCondition: Fixture is tested with no special conditions.
6122 S. EASTERN AVE, COMMERCE, CA 90040
Test Report: L10137601
Model Number:
Report Prepared For:
cuepix blinder
ELATION LIGHTING
Electrical and Photometric tests as required by the IESNA test standards.
Standards Used: Appropriate part or all test guidelines were used for test performed:
IESNA LM79: 2008 Approved Methods for Electrical and Photometric Measurements of Solid-State Lighting Products
ANSI NEMA ANSLG C78.377: 2008 Specification of the Chromaticity of Solid State Lighting Products
Description of Sample:
Sample Arrival Date:
Page1of4
11/6/13 ‐11/6/13
Xitron Power Analysis System 2503AH MT-EL01 01/09/14
Fluke Digital Thermometer 52k/J MT-TP02-GC 01/04/14
LLI Type C Goniophotometer System RMG-C-MKII CD-LL04-GC --
LLI 2M Sphere 2MR97 CD-SN03-S2 --
LLI Spectroradiometer SPR-3000 MT-SC01-S2 Before Use
*All Results in accordance to IESNA LM-79-2008: Approved Method for the Electrical and Photometric Testing of Solid-State Lighting.
Date of Tests:
Seasoning of Sample SSL: No seasoning was performed in accordance with IESNA LM-79.
Equipment List
Chroma Programmable AC Source 61604 PS-AC02 --
Yokogawa Digital Power Meter WT210 MT-EL06-S1 01/04/14
EquipmentUsed ModelNo StockNo CalibrationDueDate
Page1of4
8165 E Kaiser Blvd. Anaheim, CA 92808
p. 714.282.2270
f. 714.676.5558
Test#:L10137601
Date:11/7/2013
NVLAPLABCODE200927‐0
N/A
Off State Power(W): 0.00
Input Power Factor: 0.99
Efficacy: 21
Input Power (W): 214.41
Color Rendering Index (CRI): 92
Correlated Color Temperature (K): 2883
Total Harmonic Distortion @ 120V(%
)
9%
Total Harmonic Distortion @ 277V(%
)
Chromaticity Coordinate x: 0.4411
Chromaticity Coordinate y: 0.3982
Ambient Temperature (oF): 77.0
Stabilization Time (Hours): 1:50
Total Operating Time (Hours): 2:50
Manufacturer:
Model Number:
Input Voltage (VAC/60Hz): 120.00
ELATION LIGHTING
cuepix blinder
Total Lumens:
Input Current (Amp): 1.80
LAMPCAT: N/A
Driver Model Number: CUSTOM DRIVER
4537.38
LM-79 Test Summary
Page2of4
FIG.1LUMINAIRE
*All Results in accordance to IESNA LM-79-2008: Approved Method for the Electrical and Photometric Testing of Solid-State Lighting.
Page2of4
8165 E Kaiser Blvd. Anaheim, CA 92808
p. 714.282.2270
f. 714.676.5558
Test#:L10137601
Date:11/7/2013
NVLAPLABCODE200927‐0
Wavelength W/m2nm 440 0.0681 510 0.1575 580 0.3480 650 0.3991 720 0.1118
380 0.0086 450 0.1573 520 0.1934 590 0.3738 660 0.3579 730 0.0871
390 0.0025 460 0.2167 530 0.2266 600 0.4003 670 0.3131 740 0.0670
400 0.0017 470 0.1696 540 0.2540 610 0.4225 680 0.2673 750 0.0518
410 0.0037 480 0.1221 550 0.2792 620 0.4381 690 0.2200 760 0.0397
420 0.0105 490 0.1079 560 0.3024 630 0.4372 700 0.1789 770 0.0300
430 0.0292 500 0.1234 570 0.3244 640 0.4234 710 0.1430 780 0.0230
C
RI&CCT
x0.4411
y0.3982
u' 0.2559
v' 0.5197
CRI 92.20
CCT 2883
Duv ‐0.00287
510
520
530
540
550
560
06
0.7
0.8
0.9 CIE1931ChromaticityDiagram
Y
0.0
0.2
0.4
0.6
0.8
1.0
380 430 480 530 580 630 680 730 780
Wavelength(nm)
SpectralPower
PercentOutput
Page3of4
RValues
R1 92.75
R2 97.10
R3 97.57
R4 89.66
R5 91.40
R6 94.74
R7 91.49
R8 83.20
R9 65.03
R10 90.58
R11 87.82
R12 79.15
R13 94.15
R14 98.06
*All Results in accordance to IESNA LM-79-2008: Approved Method for the Electrical and Photometric Testing of Solid-State Lighting.
430
440
460
470
480
490
500
550
560
570
580
590
600
610
620
630
640
650
700
380
0.4411,0.3982
0
0.1
0.2
0.3
0.4
0.5
0.6
0
.
7
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
X
Page3of4
8165 E Kaiser Blvd. Anaheim, CA 92808
p. 714.282.2270
f. 714.676.5558
Test#:L10137601
Date:11/7/2013
NVLAPLABCODE200927‐0
Ambient temperature is set to 25oC and is measured from the center of the fixture, within 1ft from the outside of the
fixture. Temperature is maintained at 25oC throughout the testing process and the sample is stabilized for at least
30mins and longer as necessary for the sample to achieve stabilization.
Electrical measurements are measured using the listed equipment.
Disclaimers:
Thisreportmustnotbeusedbythecustomertoclaimproductcertification,approvalorendorsementbyNVLAP,NIST
oranyagencyofFederalGovernment.
Test Methods
Photometric Measurements - Goniophotometer
A Custom Light Laboratory Type C Rotating Mirror Goniophotometer was used to measure candelas(intensity) at each
angle of distribution as defined by IESNA for the appropriate fixture type.
Ambient temperature is set to 25oC and is measured from the center of the fixture, within 1ft from the outside of the
fixture. Temperature is maintained at 25oC throughout the testing process and the sample is stabilized for at least
30mins and longer as necessary for the sample to achieve stabilization.
Electrical measurements are measured using the listed equipment.
Spectral Measurements - Integrating Sphere
A Sensing Spectroradiometer SPR-3000, in conjunction with Light Laboratory 2 meter integrating sphere was used to
measure chromaticity coordinates, correlated color temperature(CCT) and the color rendering index(CRI) for each
sample.
Page4of4
ReportPreparedby: RandyChau
ygy
Engineering Manager Quality Assurance
*Attached are photometric data reports. Total number of pages: 8
*All Results in accordance to IESNA LM-79-2008: Approved Method for the Electrical and Photometric Testing of Solid-State Lighting.
Test Report Released by: Test Report Reviewed by:
Jeff Ahn Steve Kang
Page4of4
IES FLOOD REPORT
PHOTOMETRIC FILENAME : L10137601.IES
DESCRIPTIVE INFORMATION (From Photometric File)
IESNA:LM-63-2002
[TEST] L10137601
[TESTLAB] LIGHT LABORATORY, INC.
[ISSUEDATE] 11/7/2013
[MANUFAC] ELATION LIGHTING
[LUMCAT] cuepix blinder
[LUMINAIRE] 8-1/2"L. X 18-1/4"W. X 7-1/8"H. LED LUMINAIRE
[MORE] ALUMINUM REFLECTOR WITH CLEAR LENS
[BALLASTCAT] CUSTOM DRIVER
[BALLAST] INPUT: 120VAC, 60Hz.
[LAMPPOSITION] 0,0
[LAMPCAT] N/A
[OTHER] INDICATING THE CANDELA VALUES ARE ABSOLUTE AND
[MORE] SHOULD NOT BE FACTORED FOR DIFFERENT LAMP RATINGS.
[_INPUT] 120VAC, 214.41W
[_TEST PROCEDURE] IESNA:LM-79-08
Note: Candela values converted from Type-C to Type-B
CHARACTERISTICS
NEMA Type 5 H x 5 V
Maximum Candela 5716
Maximum Candela Angle 0H 0V
Horizontal Beam Angle (50%) 42.6
Vertical Beam Angle (50%) 41.6
Horizontal Field Angle (10%) 91.2
Vertical Field Angle (10%) 91.3
Lumens Per Lamp N.A. (absolute)
Total Lamp Lumens N.A. (absolute)
Beam Lumens 1641
Beam Efficiency N.A.
Field Lumens 4172
Field Efficiency N.A.
Spill Lumens 366
Luminaire Lumens 4537
Total Efficiency N.A.
Total Luminaire Watts 214.41
Ballast Factor 1.00
Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc.
Calculations based on published IES Methods and recommendations, values rounded for display purposes.
Results derived from content of manufacturers photometric file.
Page 1
IES FLOOD REPORT
PHOTOMETRIC FILENAME : L10137601.IES
AXIAL CANDELA
DEG. HOR. DEG. VERT.
90 0 90 0
85 26 85 26
75 38 75 39
65 61 65 60
55 93 55 91
47.5 333 47.5 353
42.5 959 42.5 950
37.5 1613 37.5 1599
33 1901 33 1909
29 2149 29 2133
25.5 2398 25.5 2361
22.5 2711 22.5 2648
19.5 3081 19.5 3017
17 3440 17 3377
15 3763 15 3723
13 4126 13 4134
11 4500 11 4579
9 4860 9 5003
7 5181 7 5342
5 5433 5 5558
3 5610 3 5666
1 5702 1 5708
0 5716 0 5716
-1 5702 -1 5708
-3 5610 -3 5666
-5 5433 -5 5558
-7 5181 -7 5342
-9 4860 -9 5003
-11 4500 -11 4579
-13 4126 -13 4134
-15 3763 -15 3723
-17 3440 -17 3377
-19.5 3081 -19.5 3017
-22.5 2711 -22.5 2648
-25.5 2398 -25.5 2361
-29 2149 -29 2133
-33 1901 -33 1909
-37.5 1613 -37.5 1599
-42.5 959 -42.5 950
-47.5 333 -47.5 353
-55 93 -55 91
-65 61 -65 60
-75 38 -75 39
-85 26 -85 26
-90 0 -90 0
Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc.
Calculations based on published IES Methods and recommendations, values rounded for display purposes.
Results derived from content of manufacturers photometric file.
Page 2
IES FLOOD REPORT
PHOTOMETRIC FILENAME : L10137601.IES
AXIAL CANDELA DISPLAY
-90 -60 -30 30 60 900
1429
2858
4287
5716
H
V
Maximum Candela = 5716 Located At Horizontal Angle = 0, Vertical Angle = 0
H - Horizontal Axial Candela
V - Vertical Axial Candela
Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc.
Calculations based on published IES Methods and recommendations, values rounded for display purposes.
Results derived from content of manufacturers photometric file.
Page 3
IES FLOOD REPORT
PHOTOMETRIC FILENAME : L10137601.IES
ISOCANDELA CURVES
0 204060
Horizontal Angles
-60
-40
-20
0
20
40
60
Vertical
Angles
571.6
2858
1143.2
1714.8
4001.2
5144.4
Maximum Candela = 5716 Located At Horizontal Angle = 0, Vertical Angle = 0
50% Maximum Candela = 2858
10% Maximum Candela = 571.6
Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc.
Calculations based on published IES Methods and recommendations, values rounded for display purposes.
Results derived from content of manufacturers photometric file.
Page 4

Navigation menu