ELATION PLATINUM BEAM 5R EXTREME USER MANUAL 120618
Elation Platinum Beam 5R Extreme - User Manual ELATION PLATINUM BEAM 5R EXTREME - USER MANUAL ELATION PLATINUM BEAM 5R EXTREME - USER MANUAL binaries adjmedia 3:
2019-02-19
: Cdb Elation Platinum Beam 5R Extreme - User Manual ELATION PLATINUM BEAM 5R EXTREME - USER MANUAL 9972 ItemRelatedFiles
Open the PDF directly: View PDF 
.
Page Count: 40
| Download | |
| Open PDF In Browser | View PDF |
user manual EL AT IO N | PLATINUM BEAM 5R EXTREME | user manual PLATINUM BEAM 5R EXTREME™ ©2018 ELATION PROFESSIONAL all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ELATION brands and product names are trademarks or registered trademarks of their respective companies. ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product. Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040 323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands +31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu Elation Professional Mexico | AV Santa Ana 30 | Parque Industrial Lerma, Lerma, Mexico 52000 +52 (728) 282-7070 DOCUMENT VERSION Due to additional product features and/or enhancements, an updated version of this document may be available online. Please check www.elationlighting.com for the latest revision/update of this manual, before beginning installation and/or programming. DMX Channel Modes Date Document Version Software Version 02/23/15 1 ≥1.0.0 12/14/18 12/06/18 1.2 ≥1.3.2 NO CHANGE Notes Updated manual format. 2 Updated release. CONTENTS General Information 4 Limited Warranty (USA Only) 5 Safety Guidelines 6 Discharge Lamp Warning 8 Maintenance Guidelines 9 Fixture Overview 10 Lamp Installation 11 Installation Guidelines 19 System Menu 23 WDMX Internal Wireless DMX Receiver Set Up 31 DMX Channel Functions And Values 33 Error Codes 36 Specifications 37 Optional Accessories 39 3 G E N E RA L I N F O RM AT I O N INTRODUCTION Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this device. These instructions contain important safety and use information. UNPACKING Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton is damaged, carefully inspect the device for damage, and be sure all accessories necessary to install and operate the device have arrived intact. In the event damage has been found or parts are missing, please contact our customer support team for further instructions. Please do not return this device to your dealer without first contacting customer support. Please do not discard the shipping carton in the trash. Please recycle whenever possible. BOX CONTENTS 2 Omega Brackets 1 Power Cable 1 Safety Cable CUSTOMER SUPPORT Contact ELATION Service for any product related service and support needs. Also visit forums.elationlighting.com with questions, comments or suggestions. ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST 323-582-3322 | Fax 323-832-9142 | support@elationlighting.com ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET +31 45 546 85 63 | Fax +31 45 546 85 96 | support@elationlighting.eu REPLACEMENT PARTS please visit parts.elationlighting.com I M P O R T A N T N O T I C E ! THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR MANUFACTURES WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS. 4 LIMITED WARRANTY (USA ONLY) A. Elation Professional hereby warrants, to the original purchaser, Elation Professional products to be free of manufacturing defects in material and workmanship for a period of two years (730 days), and Elation Professional product rechargeable batteries to be free of manufacturing defects in material and workmanship for a period of six months (180 days), from the original date of purchase. This warranty excludes discharge lamps and all product accessories. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the Elation Professional factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Elation Professional will pay return shipping charges only to a designated point within the United States. If any product is sent, it must be shipped in its original package and packaging material. No accessories should be shipped with the product. If any accessories are shipped with the product, Elation Professional shall have no liability what so ever for loss and/or or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is modified in any manner which Elation Professional concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the Elation Professional factory unless prior written authorization was issued to purchaser by Elation Professional; if the product is damaged because not properly maintained as set forth in the product instructions, guidelines and/or user manual. D. This is not a service contract, and this warranty does not include any maintenance, cleaning or periodic check-up. During the periods as specified above, Elation Professional will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of Elation Professional under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of Elation Professional. All products covered by this warranty were manufactured after January 1, 1990, and bare identifying marks to that effect. E. Elation Professional reserves the right to make changes in design and/or performance improvements upon its products without any obligation to include these changes in any products theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with the products described above. Except to the extent prohibited by applicable law, all implied warranties made by Elation Professional in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty periods set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said periods have expired. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall Elation Professional be liable for any loss and/or damage, direct and/or consequential, arising out of the use of, and/or the inability to use, this product. G. This warranty is the only written warranty applicable to Elation Professional products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published. WARRANTY RETURNS All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items returned without a R.A. number clearly marked on the outside of the package will be refused and returned at customer’s expense. You may obtain a R.A. number by contacting customer support. ONLY Use the original packaging and materials to transport the fixture in for service. 5 SAFETY GUIDELINES This fixture is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. Elation Professional is not responsible for injury and/or damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual. Only qualified and/or certified personnel should perform installation of this fixture and only the original rigging parts (omega brackets) included with this fixture should be used for installation. Any modifications to the fixture and/or the included mounting hardware will void the original manufactures warranty and increase the risk of damage and/or personal injury. PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR MANUFACTURES WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS. DO NOT PLUG FIXTURE INTO A DIMMER PACK! NEVER OPEN THIS FIXTURE WHILE IN USE! UNPLUG POWER BEFORE SERVICING FIXTURE! NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY BE HOT! KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE! NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE! RETINA INJURY RISK - MAY INDUCE BLINDNESS! SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK! INDOOR / DRY LOCATIONS USE ONLY! DO NOT EXPOSE FIXTURE TO RAIN AND MOISTURE! MINIMUM DISTANCE TO OBJECTS/SURFACES MUST BE 27 FEET (8 METERS) MAXIMUM TEMPERATURE OF EXTERNAL SURFACE 212° F (100°C) 6 SAFETY GUIDELINES RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET UV RADIATION! FIXTURE EMITS HIGH INTENSITY WAVELENGTH OF ULTRAVIOLET UV LIGHT FROM THE UV COLOR FILTER. WEAR PROPER EYE AND SKIN PROTECTION. AVOID PROLONGED PERIODS OF EXPOSURE TO UV COLOR FILTER. AVOID WEARING WHITE COLOR CLOTHING AND/OR USING UV PAINTS ON SKIN. AVOID DIRECT EYE AND/OR SKIN EXPOSURE AT DISTANCES LESS THAN 11 feet (3.3m). DO NOT OPERATE FIXTURE WITH DAMAGED/MISSING EXTERNAL COVERS. DO NOT LOOK DIRECTLY INTO THE UV LIGHT AND/OR VIEW UV LIGHT DIRECTLY WITH OPTICAL INSTRUMENTS THAT MAY CONCENTRATE THE LIGHT/RADIATION OUTPUT. INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE DIS-ORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET UV LIGHT EMITTED FROM THE UV LED. DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before serving. DO NOT shake fixture, avoid brute force when installing and/or operating fixture. DO NOT operate fixture if the power cord is frayed, crimped, damaged and/or if any of the power cord connectors are damaged and do not insert into the fixture securely with ease. NEVER force a power cord connector into the fixture. If the power cord or any of its connectors are damaged, replace it immediately with a new one of similar power rating. DO NOT block any air ventilation slots. All fan and air inlets must remain clean and never blocked. Allow approx. 6” (15cm) between fixture and other devices or a wall for proper cooling. When installing fixture in a suspended environment, always use mounting hardware that is no less than M10 x 25 mm, and always install fixture with an appropriately rated safety cable. Always disconnect fixture from main power source before performing any type of service and/or cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the wire portion of the cord. During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture. This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time. Consistent operational breaks will ensure fixture will function properly for many years. 7 DISCHARGE LAMP WARNING This fixture is fitted with a DISCHARGE LAMP, which is highly susceptible to damage if improperly handled. NEVER touch the lamp with your bare hands, as the oil from your hands will shorten the life of the lamp. NEVER move the fixture until the lamp has had ample time to cool. DISCHARGE LAMPS are NOT covered under warranty conditions. Avoid switching the fixture ON and OFF repeatedly in short intervals, as this will reduce lamp life and intensity. To achieve the intensity associated with discharge lamps, these lamps use gas sealed in a high-pressure environment to emit a brilliant output. Due to the high pressure involved with the construction of the lamp, it MAY EXPLODE DURING PROLONGED EXTENSIVE USE. This risk is increased with age; added care is encouraged when dealing with older lamps. Thus, the lamp must always be replaced at the end of their recommended duty cycle. Extreme caution should be used when operating this or any fixture fitted with a gas discharge lamp. UV RADIATION NOTICE THIS FIXTURE EMITS INTENSE UV RADIATION, WHICH IS HARMFUL TO THE EYES AND SKIN. THE INTENSE LUMINANCE OF THE LAMP CAN CAUSE SEVERE DAMAGE TO THE RETINA. NEVER OPERATE THIS FIXTURE WITH ANY OF THE PROTECTIVE COVERS REMOVED. THESE COVERS HAVE BEEN SPECIALLY DESIGNED TO SHIELD AGAINST UV RADIATION. LAMP REPLACEMENT THE PHILIPS™ PLATINUM 5R LAMP MUST BE REPLACED EVERY 2,000 HOURS OR WHEN DAMAGED AND/OR DEFORMED! USE ONLY GENUINE ORIGINAL PHILIPS™ LAMPS. OTHER BRAND LAMPS WILL CAUSE DAMAGE AND WILL VOID FIXTURE WARRANTY! DISCONNECT THE MAIN POWER SUPPLY BEFORE REPLACING LAMP! FIXTURE MUST COOL FOR 60 MINUTES BEFORE REPLACING LAMP! NEVER TOUCH LAMP WITH BARE HANDS, ALWAYS WEAR GLOVES! OIL FROM HANDS WILL SHORTEN LIFE OF LAMP! MAKE SURE ALL COVERS/PANELS ARE REPLACED/SECURED BEFORE OPERATING FIXTURE TO PREVENT ANY RISK AND/OR DAMAGE TO EYE RETINA FROM UV RADIATION EXPOSIURE! 8 MAINTENANCE GUIDELINES DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE! CLEANING Frequent cleaning is recommended to insure proper function, optimized light output, and an extended life. The frequency of cleaning depends on the environment in which the fixture operates: damp, smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture’s optics. Clean the external lens surface at least every 20 days with a soft cloth to avoid dirt/debris accumulation. NEVER use alcohol, solvents, or ammonia-based cleaners. MAINTENANCE Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from your local Elation dealer. Please refer to the following points during routine inspections: A detailed review by an approved electrical engineer every three months, to make sure the circuit contacts are in good condition and prevent overheating. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall. Check for any deformations on the housing, color lenses, rigging hardware and rigging points (ceiling, suspension, trussing). Deformations in the housing could allow for dust to enter into the fixture. Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person(s). Electric power supply cables must not show any damage, material fatigue or sediments. NEVER remove the ground prong from the power cable. 9 FIXTURE OVERVIEW 10 1. LED Assembly 2. LCD Menu Function Display 3. Wireless DMX Indicator 4. DC Switch 5. Microphone 6. LEFT Button 7. DOWN Button 8. RIGHT Button 9. MODE/ESC Button 10. UP Button 11. ENTER Button 12. Wireless DMX Antenna 13. Carrying Handle(s) 14. Lamp Access/Cover Panel 15. 3pin DMX Input 16. 3pin DMX Output 17. 5pin DMX Output 18. 5pin DMX Input 19. powerCON Input 20. Fuse L A M P I N S TA L L AT I O N L A M P R E P L A C E M E N T Please note that due to the nature of the Philips™ Platinum 5R Lamp and the optical path of the Elation PLATINUM BEAM 5R EXTREME fixture, the lamp MUST BE replaced at 2,000 hours. Use only Genuine Original Philips™ Platinum 5R Lamps. Other brand lamps may cause damage and void warranty! INSTALLING OR REPLACING THE LAMP To ensure a proper/safe lamp change, carefully read all the following instructions. LAMP PROTECTION CIRCUITRY Because of the nature of the extreme heat associated with the Philips Platinum 5R lamp and the tight nature of the internal optical system, it is IMPERATIVE that the lamp be replaced every 2,000 Hours. This is done to protect the internal optical system as well as prevent accidental lamp explosion, which could lead to hot glass particles falling from the fixture. FAILURE TO CHANGE THE LAMP WITHIN 300 HOUR of the 2,000 HOUR RATED LIFE, WILL CAUSE THE FIXTURE TO AUTOMATICALLY SHUT DOWN! At 2,000 Hours the LCD control display will begin to flash, “Replace The Lamp” and the lamp will flicker for the first five minutes of operation. At this point the lamp has reached the maximum rated life and should be replaced immediately. After the lamp has flickered for about five minutes it should strike normally allowing the fixture to be used temporarily until a replacement lamp can be installed. The fixture will continue to operate for an additional 300 hours, however the “Replace the Lamp” warning will continue to flash in the display. Keep in mind that the flicker protection circuitry will only work for about 300 Hours (lamp clock life of 2,000-2,300 Hours). After 2,300 Hours the fixture will no longer respond to DMX commands and immediately enter a hibernation mode that will electronically discontinue all fixture functionality with the exception of a few menu commands. The fixture will continue to enter hibernation mode until the lamp is replaced and the lamp clock has been reset. To replace the lamp follow the safety guidelines and procedures listed on the next page. 11 LAMP SAFETY INSTRUCTIONS •! ALWAYS replace lamp every 2,000 Hours. •! Use only Genuine Original Philips™ Platinum 5R lamps. Other brand lamps may cause damage and void the warranty! •! NEVER touch the lamp with your bare hands, as the oil from your hands will shorten the life of the lamp. •! Always disconnect the fixture’s main power supply before replacing lamp. •! Allow fixture to cool for at least 15 minutes before attempting any type of service. •! Make sure ALL covers/panels are replaced/secured before operating the fixture to prevent any risk and/or damage to eye retina from UV Radiation exposure! LAMP INSTALLATION PROCEDURE 1.! Place fixture on a flat surface and remove (4) screws marked “A”, “B”, “C”, and “D” and then remove rear cover plate (see image below) to access the lamp. LAMP COVER PLATE 12 2.! Gently remove (2) Wires connected to spade terminals on base of lamp. 3.! Using two fingers on your RIGHT hand, pull the retention handle OUT and towards the RIGHT as far as possible. 13 4.! While pulling the retention handle with your RIGHT hand, use your LEFT hand to gently twist the lamp COUNTERCLOCKWISE to remove it from under the retention brackets. 14 5.! Using two fingers on your RIGHT hand, pull the retention handle OUT and towards the RIGHT as far as possible. 6.! While pulling the retention handle with your RIGHT hand, use your LEFT had to gently install the lamp under the retention brackets by holding the lamp at a slight angle and positioning it until it is flush with the base. 15 7.! While still holding the retention handle with your RIGHT hand, gently turn the lamp CLOCKWISE with your LEFT hand until the lamp is correctly aligned under the retention brackets. 8.! Release the retention handle with your RIGHT hand and make sure the handle is upright and not at an angle. 16 9.! Gently attached (2) Wires connected to spade terminals on base of lamp. 10.!Replace the lamp cover back into place by securing (4) screws marked “A”, “B”, “C”, and “D”. 11.!Be sure to reset the LAMP HOURS in the system menu to prevent the protection circuitry from accidently shutting off the lamp during normal operation. 12.!If the lamp protection circuitry has already been initiated and the LAMP HOURS is not reset, the “Replace the Lamp” warning will continue to flash and fixture will eventually shut down. To reset LAMP HOURS, see instructions on the next page. 17 LAMP HOURS RESET PROCEDURE 1.! Activate the main menu by pressing MODE/ESC and toggle to “Information”. 2.! Press ENTER and press UP or DOWN to toggle to “Time Information”. 3.! Press UP or DOWN to toggle to “L-Timer Password” and press ENTER. Then press UP or DOWN to enter the reset pass code, “038” and press ENTER to confirm. The display will automatically revert to “L-Timer Password”, next press UP or DOWN to toggle down to “Clear Lamp Time”. 4.! Press ENTER and select “ON”. The lamp timer has now been reset, press MODE/ESC to exit the menu and return to the home screen. LAMP OPTIMIZATION Unlike traditional discharge lamps the Philips™ Platinum 5R PRO Lamp does NOT require optimization. The lamp orientation and optimization procedure has been preset during the manufacturing process of the lamp. Please remember the Philips™ Platinum 5R PRO Lamp is NOT a hot-restrike lamp therefore, you must wait approximately 15 minutes before you can attempt to restrike the lamp once it has been turned off. 18 I N S TA L L AT I O N G U I D E L I N E S FLAMMABLE MATERIAL WARNING Keep fixture at least 5.0 feet (1.5m) away from any flammable materials, decorations, pyrotechnics, etc. ELECTRICAL CONNECTIONS A q ua l i fi e d e l e c tr i ci a n s h o ul d b e u s ed f or a l l el ec tr i c al c o n n ec t i o n s a n d/ or i n s t a l l at i o n s . MINIMUM DISTANCE TO OBJECTS/SURFACES MUST BE 27 FEET (8 METERS) MAXIMUM TEMPERATURE OF EXTERNAL SURFACE 212° F (100°C) DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO! Fixture MUST be installed following all local, national, and country commercial electrical and construction codes and regulations. Before rigging/mounting the fixture to any metal truss/structure or placing the fixture on any surface, a professional equipment installer MUST be consulted to determine if the metal truss/structure or surface is properly certified to safely hold the combined weight of the fixture, clamps, cables, and accessories. Fixture ambient operating temperature range is 14° to 113°F. (-10° to 45°C) Do not use the fixture under or above this temperature. Fixture should be installed in areas outside walking paths, seating areas, or away from areas were unauthorized personnel might reach the fixture by hand. NEVER stand directly below the fixture when rigging, removing or servicing. Overhead fixture installation must always be secured with a secondary safety attachment, such as an appropriately rated safety cable. Allow approximately 15 minutes for the fixture to cool down before serving. 19 I N S TA L L AT I O N G U I D E L I N E S MOUNTING POINTS Overhead mounting requires extensive experience, including amongst others calculating working load limits, installation material being used, and periodic safety inspection of all installation material and the device. If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury. Fixture is fully operational only in the specific mounting positions as illustrated below. SAFETY CABLE ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT DROP IF THE CLAMP FAILS. 20 I N S TA L L AT I O N G U I D E L I N E S CLAMP MOUNTING The fixture provides a unique mounting bracket assembly that integrates the bottom of the base, the included Omega Brackets (x2) and safety cable rigging point in one unit (see the illustration below). When mounting this fixture to truss be sure to secure an appropriately rated clamps to the included omega brackets using a M10 screw fitted through the center hole of the Omega Bracket. Be sure to attach the included Safety Cable to the fixture using the safety cable rigging point integrated in the base assembly. SECURING Regardless of the rigging option you choose for your fixture always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle. 21 POTENTIAL INTERNAL FIXTURE DAMAGE FROM EXTERNAL SOURCES OF LIGHT BEAMS External sources of light beams from direct sunlight, lighting moving head fixtures, and lasers, which are focused directly towards the exterior housing and/or penetrate the front lens opening of ELATION lighting fixtures, can cause severe internal damage including burning to optics, dichroic color filters, glass and metal gobos, prisms, animation wheels, frost filters, iris, shutters, motors, belts, wiring, discharge lamps, and LEDs. This issue is not specific only to ELATION lighting fixtures, it is a common issue with lighting fixtures from all manufacturers. Although there is no true way to fully prevent this issue from happening, the guidelines below can prevent any potential damage from occurring if followed. Contact ELATION Service for more details. DO NOT EXPOSE THE FIXTURE AND/OR FRONT LENS OPENING TO LIGHT BEAMS FROM DIRECT SUNLIGHT, OTHER LIGHTING MOVING HEAD FIXTURES, AND LASERS WHILE UNPACKING, INSTALLATION, USE, AND EXTENDED IDLE TIMES OUTDOORS. DO NOT FOCUS A LIGHT BEAM FROM ONE LIGHTING FIXTURE DIRECTLY TOWARDS ANOTHER. 22 SYSTEM MENU The fixture includes an easy to navigate system menu. The control panel (see image below) located on the front of the fixture, provides access to the main system menu and is where all necessary system adjustments are made to the fixture. During normal operation, pressing MODE/ESC button once will access the fixture’s main menu. Once in the main menu you can navigate through the different functions and access the sub-menus with the UP, DOWN, RIGHT, and LEFT buttons. Once you reach a field that requires adjusting, press the ENTER button to activate that field and use the UP and DOWN buttons to adjust the field. Pressing the ENTER button once more will confirm your setting. You may exit the main menu at any time without making any adjustments by pressing the MODE/ESC button. To access the LCD Menu Control Display via the internal battery, press and hold the MODE/ESC button for 3 seconds. The LCD Menu Control Display will shut OFF automatically about 1 minute from the last button press. 23 ELATION PLATINUM BEAM 5R EXTREME SYSTEM MAIN MENU FUNCTION Specifications and features are subject to change without any prior written notice. SUB MENU OPTIONS / VALUES (Default Settings in BOLD) DESCRIPTION Set DMX Address DMX Value Slave Mode Auto Program Sound Control Time Information INFORMATION LAMP CONTROL Temperature Info Software Version Lamp ON or OFF Automatic Lamp ON Lamp ON via DMX Lamp OFF via DMX Max ON at Temp Lamp OFF Temp Status Settings Service Setting PERSONALITY MENU Fans Control Display Setting A001~AXXX ALL…… Slave1, Slave2, Slave3 Master / Alone Master / Alone Current Time XXXX (Hours) Total Run Time XXXX (Hours) Last Run Time XXXX (Hours) Lamp Hours XXXX (Hours) Lamp Off Time XXXX (Minutes) LastRun Password Password=XXX Clean Last Run ON / OFF LampTime Password=XXX Password ON / OFF Clean Lamp Time Head Temperature XXX C° / F ° V1.0.0... ON/OFF ON/OFF ON/OFF ON/OFF 20~79°C (45°C) / 68 ~ 174°F (113°F) 80~139°C (130°C) / 176 ~ 282°F (266°F) Address via DMX ON/OFF No DMX Status Close/Hold/Auto/Music Pan Reverse ON/OFF Tilt Reverse ON/OFF 630/540/540-90 Offset Pan Degree Feedback ON/OFF Movement Speed Speed 1 ~ 4 Mic Sensitivity 0-99% Hibernation OFF, 01M~99M, 15M Password Password=XXX RDM PID XXXXXX Auto, High, Low Shutoff Time 02~60m 05m Display Reverse ON/OFF Key Lock ON/OFF Temperature C/F Celsius/Fahrenheit Initial Status PAN =XXX WDMX OFF Activate WDMX Act & Data Out Clean WDMX Memo ON/OFF Wireless DMX Reset Default 24 DMX Address Setting DMX Value Display Slave Setting Auto Program Sound Control Fixture Run Time From Power ON Fixture Total Run Time Clear Fixture Last Run Time Lamp Total Run Time Lamp OFF Time Password 038 Reset Fixture Last Run Time Password 038 Reset Lamp Run Time Temperature in Fixture Head Software Version Lamp ON/OFF Lamp ON/OFF when Power ON Lamp ON via DMX Lamp OFF via DMX Lamp ON at Temp Lamp OFF at Temp Address Via DMX Auto Run If No DMX Pan Reverse Movement Tilt Reverse Movement Pan Degree Select Movement Feedback Movement Mode Select Sensitivity of Microphone Stand By Mode Service Password 050 RDM PID Code Fans Speed Select Display Shut Off Time Display Reverse 180º Key Lock Temperature Switch Between C˚/ F˚ Initial Effect Position De-activate WDMX Activate WDMX Act & Data Out Reset Wireless DMX Mem Restore factory settings ELATION PLATINUM BEAM 5R EXTREME SYSTEM MAIN MENU Reset Function Effect Adjust MENU Specifications and features are subject to change without any prior written notice. OPTIONS / VALUES (Default Settings in SUB MENU DESCRIPTION BOLD) Reset All Reset Pan^Tilt Reset Colors Reset Gobos Reset Shutter Reset Others Test Channel Manual Control Calibration User Mode User Mode Set Edit User Mode Select Programs Edit Program Edit Program Edit Scenes Record Controller PAN …… PAN =XXX, ...... Calibrate Password Standard Mode Basic Mode Extended Mode User Mode A User Mode B User Mode C Max Channel = XX PAN = CH01 Auto Pro Part1 = Program 1~10 (Program 1) Auto Pro Part2 = Program 1~10 (Program 2) Auto Pro Part3 = Program 1~10 (Program 3) Program 1 Program Test : Step 01=SCxxx Program 10 Step 64=SCxxx Pan,Tilt,…… Scene 001 --Fade Time-~ --Scene Time-Scene 250 Input By Outside XX~XX Reset All Motors Reset Pan/Tilt Reset Color Wheel Reset Gobos Reset Shutter and/or Dimmer Reset Other Motors Test function Fine Adjustments Password 050 DMX Channel Modes User Defined Channel Assignment Edits User Defined Channel Assignments Select Programs To Be Run Testing Program Program In Loop Save and Exit Save and Automatically Return Manual Scenes Edit Stores Scenes via Ext DMX Console Automatic Scenes Recorder FUNCTION - Auto Program Define fixture mode (Master or Alone) for running Auto Programs. Select desired internal programs under “Select Program”, set the number of steps under “Edit Program”, and edit individual scenes under “Edit Scenes”. This counter can be reset. LAMP CONTROL - Lamp ON at Temp The fixture is designed to shut the lamp OFF when an excessive temperature is sensed inside the head by the on-board CPU. The lamp is shut OFF to prevent damage to the lamp and avoid possible internal damage to the fixture head. This function sets the MIN internal operating temperature of the fixture head before the lamp will restrike after the lamp has been automatically shut OFF. 25 LAMP CONTROL - Lamp OFF Temp The fixture is designed to shut the lamp OFF when an excessive temperature is sensed inside the head by the on-board CPU. The lamp is shut OFF to prevent damage to the lamp and avoid possible internal damage to the fixture head. This function sets the MAX internal operating temperature of the fixture head when the lamp will automatically be shut OFF. PERSONALITY - Status Settings - Address Via DMX When ON, define the desired DMX address via an external controller. 1.! Connect the fixture to the external controller and power ON. 2.! Set the DMX value of Channel 1 on the controller to (7). 3.! Set the DMX value of Channel 2 on the controller to (7) or (8). When set to (7), the DMX address can be set between (1) and (255). When set to (8), the DMX address can be set between (256) and (511). 4.! Using Channel 3 on the controller set the desired DMX address of the fixture. Example 1: If the desired DMX address is 57, set Channel 1 to a value of (7), set Channel 2 to a value of (7), and then set Channel 3 to a value of (57). Example 2: If the desired DMX address is 420, set Channel 1 to a value of (7), set Channel 2 to a value of (8), and then set Channel 3 to a value of (164). (256+164=420) 5.! After setting Channel 3 to the desired DMX address value, wait for approximately 20 seconds for the fixture to complete the address reset function. EFFECT ADJUST – Manual Control Select and manually test and fine adjust each individual channel function Independently from DMX control board. This function will center PAN and TILT motors and set dimmer to 100%. PAN and TILT functions will still operate if the fixture needs to be positioned to a flat clear surface. With the individual functions, you can focus the light on a flat surface (wall) and perform fine adjustments. 26 EFFECT ADJUST – Calibration ONLY QUALIFIED TECHNICIANS SHO ULD PERFORM THI S FUNCTION. This function allows small adjustments to be made to the effect wheels (Color, Gobo, Shutter, etc.) to compensate for ware or in the event a sensor has been knocked slightly out of place. Because improper use of this function can result in undesired operation this function has been password protected. The password is 050 and must be entered each time the calibration menu function is entered. Because calibration is an extremely delicate procedure, instructions on performing this action are left out of this manual. For a first time calibrator, please contact our customer support team for step-by-step instructions. USER MODE SET – User Mode Select operating mode, which includes DMX Channel and User defined modes. USER MODE SET – Edit User Mode Create user defined channel orders allowing the fixture to match the channel order of other fixtures on the market for easier operation. A total of three user modes may be configured: User Mode A, User Mode B, and User Mode C. EDIT PROGRAM – Select Program Select one of the (10) user defined internal Auto Programs. EDIT PROGRAM – Edit Program Edit any of the (10) user defined internal Auto Programs. EDIT PROGRAM – Edit Scenes Edit any of the scenes of the internal Auto Programs. EDIT PROGRAM – Record Controller The fixture features an integrated DMX-recorder by which you can transmit the programmed scenes from your DMX-controller to the moving head. Adjust the desired scene numbers via the encoder (from – to). When you call up the scenes at your controller, they will automatically be transmitted to the moving head. 27 EDIT PROGRAM – Record Controller – Working With Built In Programs A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3 different Slave units, which run 3 different programs. The Master unit sends the 3 program parts in a continuous loop. The Slave unit receives data from the Master unit according to the group which the Slave unit was assigned to. If e.g. a Slave unit is set to “Slave 1” in the menu “Set to Slave”, the Master unit sends “Auto Program Part 1” to the Slave unit. If set to “Slave 2”, the Slave unit receives “Auto Program Part 2”. To start an Auto Program proceed as follows: 1. Slave Setting • Select “Function Mode”. • Press ENTER to confirm. • Select “Set to Slave”. • Press ENTER to confirm. • Select “Slave 1”, “Slave 2” or “Slave 3”. • Press ENTER to confirm. • Press MODE/ESC in order to return to the main menu. 2. Automatic Program Run • Select “Function Mode”. • Press ENTER to confirm. • Select “Auto Program”. • Press ENTER to confirm. • Select “Master” or “Alone”. • Press ENTER to confirm. • Press MODE/ESC in order to return to the main menu. 28 EDIT PROGRAM – Record Controller – Working With Built-In Program [continued] 3. Program Selection for Auto Pro Part • Select “Edit Program”. • Press ENTER to confirm. • Select “Select Programs”. • Press ENTER to confirm. • Select “Auto Pro Part 1”, “Auto Pro Part 2” or “Auto Pro Part 3”, and select which Slave program is to be sent. Selection “Part 1” means, that the Slave unit runs the same program as the master units. • Press ENTER to confirm. • Press MODE/ESC in order to return to the main menu. 4. Program Selection for Edit Program • Select “Edit Program”. • Press ENTER to confirm. • Select “Edit Program”. • Press ENTER to confirm. • Select the desired program. With this function you can edit specific scenes into a specific program. • Press ENTER to confirm. • Press MODE/ESC in order to return to the main menu. 5. Automatic Scene Recording • Select “Edit Program”. • Press ENTER to confirm. • Select “Edit Scenes”. • Select desired scene numbers. A maximum of 250 scenes can be programmed. • Press ENTER to confirm. • Press MODE/ESC in order to return to the main menu. 29 EDIT PROGRAM – Record Controller – Working With Built-In Program [continued] Example: Program 2 includes scenes: 10, 11, 12, & 13 Program 4 includes scenes: 8, 9, & 10 Program 6 includes scenes: 12, 13, 14, & 15 Auto Pro Part 1 is Program 2 Auto Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments, as shown in the following picture: 30 WDMX INTERNAL WIRELESS DMX RECEIVER SET UP The fixture is equipped with an internal Wireless DMX Receiver, which is fully compatible with an Elation Wireless DMX System. Access the “Wireless DMX” sub menu from the “PERSONALITY” menu, then select desired WDMX connection function, which includes: WDMX Off - Turn OFF Wireless DMX Activate WDMX - Turn ON Wireless DMX Act & Data Out - Turn ON Wireless DMX and send DMX data to wired 3/5pin outputs Clean WDMX Memo - Clear WDMX memory When the WDMX system is “Activated” the internal DMX “IN” XLR jacks are OFF. However the internal DMX “OUT” XLR jacks will function normally. If the fixture is powered ON with the internal WDMX system “Activated”, it will automatically scan for a wireless DMX signal from an Elation Wireless Transmitter. IF NO WIRELESS SIGNAL AVAILABLE, FIXTURE WILL SEND DATA TO 3/5PIN OUTPUTS! W A R N I N G ! NEVER CONNECT A FIXTURE TO A CONTROLLER VIA A DMX CABLE WHEN THE WDMX SYSTEM IS IN USE. THIS COULD CAUSE SERIOUS DAMAGE TO THE CONTROLLER!! SETTING UP THE WDMX SYSTEM Follow the instructions included with the Elation EWDMX Transmitter and connect it to the output of your DMX controller. To sync your fixture with the Elation EWDMX Transmitter follow the steps below: •! Initially, the Wireless Indicator on the fixture control panel should be solid RED. •! Press and hold the configuration button on your EWDMX Transmitter for about 3 seconds. The RED/GREEN LED indicators on the EWDMX Transmitter and the fixture should begin to flash rapidly for about 5-10 seconds while the two systems pair. •! Once the fixture is paired with the EWDMX Transmitter (T1), the Wireless status indicators on the both the fixture and the EWDMX Transmitter will stop flashing and glow solid GREEN. If paring is unsuccessful repeat the process until paring is secured. •! The fixture will store the pairing information inside a nondestructive memory bank once a link is created between the fixture and an EWDMX Transmitter. The fixture will remember the paired EWDMX Transmitter even if the fixture is turned OFF for extended periods of time. 31 WDMX INTERNAL WIRELESS DMX RECEIVER SET UP CLEARING EWDMX TRANSMITTER LINK •! Access the “Wireless DMX” sub menu from the “PERSONALITY” menu, and then select “Clear WDMX Memo” to clear any existing link between the fixture and a EWDMX Transmitter. The Wireless indictor on the fixture will turn solid RED when the link is severed. •! You may also clear the link directly from the EWDMX Transmitter. First, be sure the fixture(s) is powered ON, and then hold down the configuration button on the EWDMX Transmitter for as least 5 seconds. This will automatically clear the link between the EWDMX Transmitter and any fixture that is powered ON. All EWDMX indictors will glow solid RED if the procedure was successful. FIXTURE WIRELESS INDICATOR RED/GREEN (Rapid Flashing) = Syncing to an EWDMX Transmitter. RED/GREEN (Slow Flashing) = Paired with an EWDMX Transmitter but not receiving a DMX signal from a controller. GREEN (Solid) = Paired with an EWDMX Transmitter and receiving DMX data. RED (Solid) = Not paired with an EWDMX Transmitter (FREE). 32 DMX CHANNEL FUNCTIONS AND VALUES ELATION PLATINUM BEAM 5R EXTREME DMX Channel Values / Functions (18 DMX Channels) Specifications are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of COLOR, GOBO, and PRISM effects depends on the orientation of the fixture head. MODE / CHANNEL BASIC STAND EXTEND 1 1 1 2 2 2 3 4 3 4 VALUE FUNCTION PAN MOVEMENT [8 BIT] 0-255 PAN Movement By 630/540 PAN FINE MOVEMENT [16 BIT] 0-255 Fine Control of PAN Movement TILT MOVEMENT [8 BIT] 0-255 TILT Movement By 270 TILT MOVEMENT [16 BIT] 0-255 Fine Control of TILT Movement COLOR WHEEL 0-10 3 5 5 6 11-21 OPEN / WHITE RED 22-32 BLUE 33-43 GREEN 44-54 YELLOW 55-65 MAGENTA 66-76 LIGHT BLUE 77-87 ORANGE 88-98 PURPLE 99-109 UV FILTER 110-120 CTO 121-127 CTB 128-189 *Clockwise Color Rotation from FAST to SLOW 190-193 NO Rotation 194-255 *Counterclockwise Color Rotation from SLOW to FAST COLOR WHEEL FINE ADJUSTMENT 0-255 FINE Adjustment of Color Wheel to Any Position ROTATING GOBOS, CONTINOUS ROTATION 0-9 4 6 7 OPEN / WHITE 10-19 Rotating Gobo 1 20-29 Rotating Gobo 2 30-39 Rotating Gobo 3 40-49 Rotating Gobo 4 50-59 Rotating Gobo 5 60-69 Rotating Gobo 6 70-79 Rotating Gobo 7 80-89 Rotating Gobo 8 90-104 Rotating Gobo 1 Shake 105-119 Rotating Gobo 2 Shake 120-134 Rotating Gobo 3 Shake 135-149 Rotating Gobo 4 Shake 150-164 Rotating Gobo 5 Shake 165-179 Rotating Gobo 6 Shake 180-194 Rotating Gobo 7 Shake 195-209 Rotating Gobo 8 Shake 210-255 Gobo Wheel Continuous Rotation from SLOW to FAST 33 ELATION PLATINUM BEAM 5R EXTREME DMX Channel Values / Functions (18 DMX Channels) Specifications are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of COLOR, GOBO, and PRISM effects depends on the orientation of the fixture head. MODE / CHANNEL BASIC STND VALUE FUNCTION EXTEND 9 ROTATING GOBOS, FINE INDEX ROTATION 0-255 Gobo Rotation FINE Indexing ROTATING GOBOS, INDEX ROTATION 0-127 5 7 8 Gobo Indexing 128-189 *Clockwise Gobo Rotation from FAST TO SLOW 190-193 NO Rotation 194-255 *Counterclockwise Gobo Rotation from SLOW to FAST ROTATING PRISM, PRISM / GOBO MACROS 6 7 8 9 10 11 12 0-3 OPEN 4-63 8-FACET PRISM *Clockwise Rotation from FAST to SLOW 64-67 NO Rotation 68-127 8-FACET PRISM *Counterclockwise Rotation from SLOW to FAST 128-135 Macro 1 136-143 Macro 2 144-151 Macro 3 152-159 Macro 4 160-167 Macro 5 168-175 Macro 6 176-183 Macro 7 184-191 Macro 8 192-199 Macro 9 200-207 Macro 10 208-215 Macro 11 216-223 Macro 12 224-231 Macro 13 232-239 Macro 14 240-247 Macro 15 248-255 Macro 16 FOCUS 0-255 Continuous Adjustment from NEAR to FAR FOCUS FINE 0-255 Continuous FINE Focus Adjustment SHUTTER, STROBE 8 9 10 11 13 14 15 0-31 Shutter CLOSED 32-63 NO Function (Shutter OPEN) 64-95 Strobe Effect SLOW to FAST 96-127 NO Function (Shutter OPEN) 128-159 Pulse Effect In Sequences 160-191 NO Function (Shutter OPEN) 192-223 Random Strobe Effect SLOW to FAST 224-255 NO Function (Shutter Open) DIMMER INTENSITY 0-255 Intensity 0 to 100% DIMMER INTENSITY FINE 0-255 Dimmer Intensity FINE Adjustment 34 ELATION PLATINUM BEAM 5R EXTREME DMX Channel Values / Functions (18 DMX Channels) Specifications are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of COLOR, GOBO, and PRISM effects depends on the orientation of the fixture head. MODE / CHANNEL BASIC STND EXTEND 10 12 16 VALUE FUNCTION FROST 0-127 Disable FROST 128-255 Enable FROST PAN / TILT MOVEMENT SPEED 0-225 11 13 17 MAX to MIN Speed 226-235 Blackout by Movement 236-245 Blackout by ALL Wheel Changing 246-255 NO Function LAMP ON/OFF, RESET, INTERNAL PROGRAMS 12 14 18 0-19 COLOR & GOBO Change Normal 20-29 COLOR Change to Any Position 30-39 COLOR & GOBO Change to Any Position 40-59 LAMP ON 60-79 LAMP Switch OFF 80-84 ALL Motor Reset 85-87 SCAN Motor Reset 88-90 COLORS Motor Reset 91-93 GOBO Motor Reset 94-96 SHUTTER & DIMMER Motor Reset 97-99 OTHER Motor Reset 100-119 Internal Program 1 120-139 Internal Program 2 140-159 Internal Program 3 160-179 Internal Program 4 180-199 Internal Program 5 200-219 Internal Program 6 220-239 Internal Program 7 240-255 Auto Program by Sound Control 35 ERROR CODES When power is applied, the unit will automatically enter a “Reset/Test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an error code will flash in the display in the form of “XXer” were as XX will represent a function number. For example, when the display shows “0Er” it means there is some type of error with the Pan motor. If there are multiple errors during the start-up process they will all flash in the display. For example: if the fixtures has errors on Channel 1, 2, and 5 all at the same time, you will see the error message “01Er”, “02Er”, and ”05Er” flash repeated 5 times. If an error does occur during the initial start-up procedure the fixture will self-generate a second reset signal and try to realign all the motors and correct the errors. If the error persists after a second attempt a third attempt will be made. If after a third attempt all the errors have not been corrected the fixture will make the following determinations: •! 3 or More Errors - The fixture cannot function properly with three or more errors therefore the fixture will place itself in a stand-by mode until subsequent repairs can be made. •! Less Than 3 Errors - The fixture has less than 3 errors; therefore most other functions will work properly. The fixture will attempt to operate normally until the errors can be correct by a technician. The errors in question will remain flashing in the display as a reminder of internal errors. PAN Er Gobo Rot. 1 Er TILT Er Focus Er Color Wheel Er Gobo Wheel 1 Er 36 S P E C I F I C AT I O N S SOURCE 189W Platinum 5R Lamp 2,000 Hour Average Life* *May vary depending on several factors including but not limited to: Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming. EFFECTS Frost Motorized Focus Strobe (1-18 fps) Electronic Dimming: 0% - 100% 8 Facet Rotating Prisms and Macros COLOR (12) Colors Including UV, CTO, CTB GOBOS (8) Metal Rotating, Indexing, Interchangeable Gobos CONTROL / CONNECTIONS (3) DMX Channel Modes (12 / 14 / 18) Remote Device Management Pan Movement: 540°/630° / Tilt Movement: 270° 6 Button Control Panel Full Color 180° Reversible LCD Menu Display 16 Bit 3-Phase Pan/Tilt Motors 3pin & 5pin DMX In/Out powerCON In Internal EWDMX Wireless DMX Receiver SIZE / WEIGHT Length: 13.9” (352mm) Width: 13.0” (329mm) Vertical Height: 20.0” (509mm) Weight: 44.0 lbs. (20.0 kg) ELECTRICAL / THERMAL AC 100-240V - 50/60Hz 350W Max Power Consumption 14°F to 113°F (-10°C to 45°C) APPROVALS CE | IP20 Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. 37 COLORS AND GOBOS **IMPORTANT NOTICE REGARDING GOBO DIMENSIONS AND CUSTOM GOBOS OD = Outside Diameter | ID = Image Diameter Due to varying manufacturing processes, it is highly recommended to provide a gobo and holder sample from the fixture to 3rd party custom gobo vendors for accurate sizing. PHOTOMETRIC DATA Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. 38 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device uses and can radiate radio frequency energy and, if not installed and used in accordance with the included instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following methods: •! Reorient or relocate the device. •! Increase the separation between the device and the receiver. •! Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected. •! Consult the dealer or an experienced radio/TV technician for help. DIMENSIONAL DRAWINGS Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. OPTIONAL ACCESSORIES ORDER CODE ITEM ZB-MSD PLATINUM 5R Philips MSD Platinum 5R Lamp TRIGGER CLAMP Heavy Duty Wrap Around Hook Style Clamp DRCPLAT Dual Flight Case For Platinum Beam 5R EXTREME™ DRCPLATQUAD Quad Flight Case For Platinum Beam 5R EXTREME™ EWDMXSYSTEM Wireless DMX System (1 Transmitter, 1 Receiver) AC3PDMX5PRO 5 ft. (1.5m) 3pin PRO DMX Cable AC5PDMX5PRO 5 ft. (1.5m) 5pin PRO DMX Cable Additional Cable Lengths Available 39
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No XMP Toolkit : XMP Core 5.4.0 Modify Date : 2018:12:06 15:19:03-08:00 Creator Tool : Word Create Date : 2018:12:06 23:18:22Z Metadata Date : 2018:12:06 15:19:03-08:00 Producer : Mac OS X 10.10.5 Quartz PDFContext Creator : cmg Format : application/pdf Title : ELATION PLATINUM BEAM 5R EXTREME - USER MANUAL 120618 Document ID : uuid:e76d761d-6c95-b44e-a4af-2f381fd55e51 Instance ID : uuid:619769d3-dcc9-a64f-87f4-c638b2425534 Page Count : 40 PDF Version : 1.4 Author : cmgEXIF Metadata provided by EXIF.tools