HexStar Hex Star
Hexstar HexStar HexStar 7629 ItemRelatedFiles cdb 3:
2018-10-12
: Cdb Hexstar HexStar 7629 ItemRelatedFilesLinksList
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
HexStar™ Introduction Introduction: Thank you for purchasing the HexStar™ by American DJ®. The HexStar™ is six head centerpiece effect with independently rotating barrel type mirrored heads. The unit includes a multi-colored dichroic dish that produces multiple colored beams of light. This unit also includes superior optics for an overall crisp light output which intensifies beam intensity. To enhance the beam output use this effect with a fog machine or other smoke effect. The unit comes with a three position mode switch that allows the unit to operate in two different sound-active mode or a static mode. Customer Support: American DJ® provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5: 00 p.m. Pacific Standard Time. Voice: (800) 322-6337 Fax: (323) 582-2610 E-mail: support@americandj.com Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact your nearest American DJ dealer. Do not discard the shipping cartoon in the trash. Please recycle when ever possible. User Instructions American DJ Revised 1/03 4295 Charter Street Los Angeles Ca. 90058 www.americandj.com HexStar™ Unpacking Unpacking: Every HexStar™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your units for any damage and be sure all accessories necessary to operate the system have arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please do not return the system to your dealer without first contacting customer support. ©American DJ Supply® - www.americandj.com - HexStar™ Instruction Manual Page 2 HexStar™ Safety Precautions • Do not spill water or other liquids into or on to your unit. • Be sure that the local power outlet match that of the required voltage for your unit. • Do not attempt to operate this unit if the power cord has been frayed or broken. Please route your power cord away from foot traffic. • Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in the event of an internal short. • Disconnect from main power before making any type of connection. • Do not remove the rear cover under any conditions. There are no user serviceable parts inside. • Never plug this unit in to a dimmer pack • Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall. • Do not attempt to operate this unit if it becomes damaged in any way. • Never operate this unit when it’s front cover is removed. • To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture • This unit is intended for indoor use only, use of this product outdoors voids all warranties. • During long periods of non-use, disconnect the unit’s main power. • Always mount this unit in safe and stable matter. • Power-Cord Protection - Power-supply cords should be route so they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords a plugs, convenience receptacles, and the point where they exit from the fixture. • Cleaning -The fixture should be cleaned only as recommended by the manufacturer. • Heat -The fixture should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. • The fixture should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged. B. Objects have fallen, or liquid has been spilled into the appliance. C. The appliance has been exposed to rain or water. D. The fixture does not appear to operate normally or exhibits a marked change in performance. ©American DJ Supply® - www.americandj.com - HexStar™ Instruction Manual Page 3 HexStar™ General Instructions To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference. HexStar™ • • • • • • • Features Includes Built-In Hanging Yoke Sound-Active Easy Access Lamp Replacement Futuristic Case Design Three Different Operating Modes 6 Independent Moving Heads ZB-HX600 120v/600w Lamp HexStar™ Warranty Registration The HexStar™ carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by contacting customer support at (800) 322-6337. HexStar™ Halogen Lamp Warning Halogen Lamp Warning: This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch the lamps with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under warranty conditions. ©American DJ Supply® - www.americandj.com - HexStar™ Instruction Manual Page 4 HexStar™ Operating Instructions Lamp Replacement Caution: Always replace with the exact same type lamp, unless oth- General Operation: This fixture is designed to operate as a stand alone unit, there is no need of a controller. The HexStar creates several colorful beams of light in a wide pattern. There is no power switch, after plugging the unit in, if there is no lamp output check the breaker and bulb. If the bulb is good and the breaker does not need to be reset, please contact customer support the unit may need to be returned for servicing. This unit can be operated in three different modes. This fixture is designed for mobile DJ’s, clubs, bands, roller rinks and any arena that requires a unit to cover a wide area. Operating Modes: This unit comes with a 3-way multi-operating switch located on the side of the unit. The switch controls three (3) different operating modes; Static, Sound Active, and Continuous Rotation. When the switch is in the "I" position the internal dichroic dish and the six barrel mirrors will spin continuously in a single position with or without the presence of sound. When the unit is in the "0" (middle) position the internal dichroic dish will rotate to sound and the six barrel mirrors will remain static (will not rotate). When the switch is in the "II" position both the internal dichroic color dish and the six barrel mirrors will react to sound via the unit’s internal microphone. HexStar™ HexStar™ Breaker Reset Breaker: This unit uses a protective breaker to protect the unit in the event of power surges or fluctuations. To reset the breaker, push the breaker button in until you hear it pop back in to place. If the breaker continues to pop, stop using the unit and contact customer support the unit may require service. erwise specified by an authorized American DJ® technician. Replace with anything other than the specified part can damage your unit and will void your manufactures warranty. Warning: If after replacing the lamp you continue to blow lamps, STOP using the unit. Contact customer support for further instructions, you may have to return the unit for servicing. Continuing to use the unit may cause serious damage. Lamp Replacement: Disconnect from the main power supply. Be sure the unit has had ample time to cool before attempting to replace the lamp. On the front of the unit there is a single thumb screw. Remove the thumb screw and pull back the front case housing. The housing is hinged which allows it to pull back without being removed. Remove the old lamp from the socket assembly. Carefully install the new lamp, be sure to follow all the installation guide lines that are included with your new lamp. Close the front cover and replace the thumb screw. HexStar™ Trouble Shooting Trouble Shooting: Listed below are a few common problems that you may encounter, with solutions. No light output from the unit; 1. Be sure you have connected your unit into a wall outlet with a matching power supply. 2. Be sure the safety breaker does not need to be reset, the breaker is located on the side of the unit next to the AC cord. 3. Remove the lamp cover and be sure the lamp is seated in the socket properly. Occasionally lamps become loose during shipping, be sure the lamp is push in to the socket completely. Unit does not respond to sound; 1. Be sure the unit's mode switch is in the "0" or “II” position, these are the two modes that allows the unit to operate in sound active mode. 2. Low frequencies (bass) should cause the unit to react to sound. Tapping on the microphone, quiet or high pitched sounds may not activate the unit. ©American DJ Supply® - www.americandj.com - HexStar™ Instruction Manual Page 5 ©American DJ Supply® - www.americandj.com - HexStar™ Instruction Manual Page 6 HexStar™ Warranty 1-YEAR LIMITED WARRANTY A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be free of manufacturing defects in material and workmanship for a period of one year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the product only to the American DJ® factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, American DJ® will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, American DJ® shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which American DJ® concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American DJ® factory unless prior written authorization was issued to purchaser by American DJ®; if the product is damaged because not properly maintained as set forth in the instruction manual. HexStar™ Specifications MODEL: HexStar™ VOLTAGE*: LAMP LAMP: DIMENSIONS: WEIGHT: BREAKER: WORKING POSITION: COOLING: GOBOS: COLORS: WARRANTY: 120v~60Hz or 220v~50/60Hz ZB-HX600 14.5”(H) x 22”(W) x 22”(L) 18 LBS 10 ANY SAFE POSITION FAN COOLED NONE MULTI-COLORED DICHROIC DISH 1 YEAR (365 DAYS) * Voltage is preset at the factory and is not user selectable. Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specified above, American DJ® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American DJ® under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American DJ®. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. E. American DJ® reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American DJ® in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American DJ® be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. G. This warranty is the only written warranty applicable to American DJ® Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published. H. Lamps are not covered under this or any other warranty, either written or implied. ©American DJ Supply® - www.americandj.com - HexStar™ Instruction Manual Page 7 ©American DJ® A Division of the American DJ® Group of Companies World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 Fax: 323-582-2610 Web: www.americandj.com E-mail: info@americandj.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Modify, Annotate, Fill forms, Extract, Print high-res Modify Date : 2003:01:29 13:41:59-08:00 Create Date : 2003:01:27 12:08:52Z Producer : Adobe PDF Library 5.0 Creator : Adobe InDesign 2.0.2 Trapped : False Page Count : 4 Creation Date : 2003:01:27 12:08:52Z Mod Date : 2003:01:29 13:41:59-08:00 Metadata Date : 2003:01:29 13:41:59-08:00 Document ID : adobe:docid:indd:6e4ca00d-3382-11d7-a01d-8d6f4535376e Version ID : 1 Rendition Class : proof:pdf Rendition Of Document ID : adobe:docid:indd:6e4ca00d-3382-11d7-a01d-8d6f4535376e Rendition Of Version ID : 1 Rendition Of Rendition Class : default Format : application/pdf Title : HexStarEXIF Metadata provided by EXIF.tools