Imperio Brochure

Imperio-Brochure imperio-brochure imperio-brochure 12154 ItemRelatedFiles cdb 3:

2019-02-20

: Cdb Imperio-Brochure imperio-brochure 12153 ItemRelatedFiles

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadImperio-brochure
Open PDF In BrowserView PDF
IMPERIO
MINI LINE ARRAY
SYSTEM

Avante Audio’s Imperio mini line
array system is a great fit for small
to mid-size venues. The Imperio
system consists of the Imperio Sub,
a 10-inch, 400W Subwoofer with
a Class D digital amplifier, and the
Imperio, a cabinet with dual 4.75-inch
woofers, 6 x 1.75 inch IDVAT high
frequency drivers, a 240W Class D
power amplifier and 24-bit DSP.
The system may be configured in
a variety of ways with multiple
Imperio Subs and eight Imperio
cabinets linked together with the
sub on top or bottom. All items
including the flybar are sold
separately to allow for maximum
customizability and versatility.

AS8
SKU IMP092

SKU IMP092

IMPERIO
AMPLIFIER:

• 240W Class RMS D Amplifier Module
• Switching Power Design
• LED Power / Signal / Clip Indicator
• 24-bit DSP Selectable Configurations
• Input: 1x 3pin XLR / powerCON (NAC3FCA)
• Output: 1x 3pin XLR powerCON (NAC3FCB)
• Volume: Selectable Input Sensitivity Dial
• Power Input: 100-240V ~ 50/60Hz

SPEAKER:

IDVAT
HF DRIVERS

• 2x 4.75” Neodymium Woofers with 1-inch voice coil
• 6x 1.75” IDVAT HF drivers
(Inverted Dome Vertical Array Technology)
• Type: 2-Way Active Closed Design
• Frequency Response: 150Hz – 20KHz
• Max Output SPL: 117dB
(single box measured on Axis @1m)
• Selectable Input Sensitivity:
-3dB, 0dB, 3dB, 6dB
• Cabinet: ABS Plastic
• Grill: 1.0mm steel
• Splay Angles: 0, 4, 8, & 12-degrees
• Integrated Rigging: Yes
• Dispersion Angle: 90-degree x 15-degree
• Dimensions (LxWxH):
7.3”x8.8”x12.8” / 184.8x224x324mm
• Weight: 14 lbs. / 6.3 kg.
www.avanteaudio.com/imperio

SKU IMP400

IMPERIO SUB
SKU IMP400

AMPLIFIER:

• 400 watts RMS, Class D Power Amp, 800 watts Peak Power
• 100-120V / 220-240V ~ 50/60Hz (country specific)
• LED Power / Signal / Clip Indicator
• Input: 1x 3pin XLR powerCon (NAC3FCA)
• Output: 1x 3pin XLR powerCon (NAC3FCB)
• Phase Switchable (0 / 180)
• Internal Selectable X-Over 90Hz or 120Hz)
• Volume Control Dial

DRIVER:

• 1x 10” Woofer w/2.5” Voice Coil
• 123dB (at max output)
• Plywood Cabinet, black finish
• 6th Order Bandpass Design
• M20 Screw Pole Mount
• 1.2mm Steel Grill
• Dimensions: L 13.8” x D 18.3” x H 20.7”
• Weight 49.6 lbs.

GROUND
STACK
CONFIGURATION

www.avanteaudio.com/imperio-sub

ACCESSORIES

IMPERIO POLE

SKU IMP194

Use the Imperio Pole, along with the Sub and two of the Imperio Loudspeakers to
create “Imperio System One”. Great for small to medium events. The Imperio Pole
can be broken down into two pieces for different height selections, and easy
transport. It also includes an adapter to secure the Imperio modules.
The Imperio Pole uses an M20 thread to connect to the Sub.

IMPERIO LINK PINS

SKU IMP340

Always good to have extra pins on hand.
The Imperio Link Pins are sold in sets of four.

IMPERIO FLYBAR SM

SKU IMP496

Fly up to 8 Imperio loudspeaker modules using the Imperio Flybar SM.
*Note: Not to be used to fly subwoofers.

IMPERIO FLYBAR LG

SKU IMP265

Use two of the Imperio Flybar LG to fly an Imperio Sub and eight of the Imperio
loudspeaker modules underneath. You can also use one of the Flybar LG’s to create
a ground stack.

IMPERIO

MINI LINE ARRAY SYSTEM
ALSO AVAILABLE IN WHITE

DISCLAIMER
The data and specifications in this brochure are intended to be used for reference purposes only.
Avante does not assume responsibility for user error or omissions.
Overhead rigging of speakers may require an engineering analysis in order to fulfill all safety
requirements and comply with all governing codes.
All data and specifications are subject to change without notice.

www.avanteaudio.com
@avanteaudio
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c145 79.163499, 2018/08/13-16:40:22
Create Date                     : 2019:01:18 13:20:09-08:00
Metadata Date                   : 2019:01:18 13:20:15-08:00
Modify Date                     : 2019:01:18 13:20:15-08:00
Creator Tool                    : Adobe InDesign CC 14.0 (Macintosh)
Instance ID                     : uuid:ae00b27c-f63a-e345-9e38-f108b87d1eae
Original Document ID            : xmp.did:b6f627bf-d9b4-4487-abcd-0097d53b6877
Document ID                     : xmp.id:03893958-5a64-4261-ac9b-76fa72f92d2c
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:ad15f736-a317-40f4-8d7c-3da5b166901f
Derived From Document ID        : xmp.did:57ca021e-48ee-4c52-b57c-bdf9a09ea1db
Derived From Original Document ID: xmp.did:b6f627bf-d9b4-4487-abcd-0097d53b6877
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 14.0 (Macintosh)
History Changed                 : /
History When                    : 2019:01:18 13:20:09-08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 4
Creator                         : Adobe InDesign CC 14.0 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu