(Mctrl300) Nova M3 Led Display Control System User Manual V4.2.5

2017-12-01

• Introduction toNovaLCT-Mars
  • Configuration list
  • System architecture
• Working environment requirements
• Installation of NovaLCT-Mars
• Main Interface of NovaLCT-Mars
  • Update password
  • Main Menu
  • Tool Bar
• Main Functions of NovaLCT-Mars
  • Start the LED Displays
    • Start with System Configuration Files
    • Start Manually
      • Smart Setting
      • LED Display Configuration
    • Set the Cabinet Info
    • Adjust the Performance Parameters
    • Adjust the Resolution and Refresh Rate
    • 3D Config
    • Set Hot Backup for Receiver Cards
    • HDMI Settings（MSD600/MCTRL600/MCTRL610）
    • Save Settings to FLASH
    • Save/Load Configuration Files
  • Adjust the brightness, display quality, Gamma and Current Gain
    • Manual Adjustment
      • Gamma
    • Schedule Adjustment
    • Auto
      • Light Sensor Setting
      • Auto Brightness Time Interval
    • Auto Adjustment By Hardware
  • Display Control
  • Check Hardware Info
  • Manage the LED Displays
  • Monitor the System
    • Monitor Setting
      • The Monitor Setting Page
      • Display with Cabinets Varying in Fan/Power Supply Number
    • Email Notification Setting
    • Notification Email Log
    • Monitor-Control
      • Configure Control Scheme
      • Monitor-Control Log
      • Recovering Of Monitor-Control
  • Error Dot Detect
  • Brightness/Color Calibration
    • Online Calibration
    • Manage Coefficients
      • Upload Coefficients
      • Save Coefficients to Database
      • Set coefficients for a new scan board
      • Set coefficients for a new module
      • Adjust Coefficients
      • Erase or reload Coefficients
    • Reset coefficients
  • Function Card Management
    • Function Card Configuration
    • Power Management
      • Manual Power Control
      • Automatic Power Control
      • Software Power Control
    • Monitor Data
    • External Device
    • Load Program
  • Cabinet Library Management
  • Prestore Picture
  • Color Restore
• Memory On Module Manage
• Multi Batch Adjustment
  • Applications Adjustment File
  • Manual adjustment
• Receive card relay
• Load configuration file
• Configure information management
• Hardware Program updating
• Dark or Bright Lines Adjustment for cabinet
  • Dark or Bright Lines Adjustment for Cabinet
  • Dark or Bright Lines Recovery for Cabinet
• Problem and Solution
  • NovaLCT-Mars shows “No Hardware” on corresponding pages.
  • NovaLCT-Mars shows “No Screen” on corresponding pages.
  • The LED display does not show the image correctly during the Smart Setting procedure.
  • Only a part of the modules of each cabinet work normally in Smart Setting.
  • Permission error
• Appendix
  • Update Info