ADJ PRO EVENT TABLE II USE GUIDE 042718
Adj Pro Event Table Ii - Use Guide ADJ PRO EVENT TABLE II - USE GUIDE ADJ PRO EVENT TABLE II - USE GUIDE manuals adjmedia 3:
2018-04-27
: Cdb Pro-Event-Table-Ii pro-event-table-ii 11311 ItemRelatedFiles
Open the PDF directly: View PDF 
.
Page Count: 12
PRO EVENT TABLE II
use guide
www.adj.com
2
©2018 ADJ PRODUCTS LLC all rights reserved. Information, specifications, diagrams, images, and
instructions herein are subject to change without notice. ADJ logo and identifying product names
and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by statutory or judicial
law or hereinafter granted. Product names used in this document may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged. All non-ADJ brands and
product names are trademarks or registered trademarks of their respective companies.
ADJ PRODUCTS LLC and all affiliated companies hereby disclaim any and all liabilities for property,
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic
loss associated with the use or reliance of any information contained within this document, and/or as
a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and
operation of this product.
ADJ PRODUCTS LLC World Headquarters
6122 S. Eastern Ave. | Los Angeles, CA 90040 USA
Tel: 800-322-6337 | Fax: 323-582-2941 | www.adj.com | support@americandj.com
ADJ Supply Europe B.V.
Junostraat 2 | 6468 EW Kerkrade | Netherlands
Tel: +31 45 546 85 00 | Fax: +31 45 546 85 99 | www.americandj.eu | service@adjgroup.eu
DOCUMENT VERSION
Please check www.adj.com for the latest revision/update of this guide.
Date Document
Version
Notes
04/27/18 1 Initial version.
www.adj.com
3
CONTENTS
General Information
4
Limited Warranty
6
Setup Instructions
7
Dimensional Drawings
11
Optional Accessories
11
www.adj.com
4
GENERAL INFORMATION
INTRODUCTION
The ADJ® PRO EVENT TABLE II™ is a modern cleaning looking compact and collapsible DJ table,
that provides a professional alternative to folding banquet tables. Not only is it lightweight and easily
portable, but this cleverly-designed event surface is easily brandable, making it ideal for a wide
variety of purposes at all kinds of events. The PRO EVENT TABLE II collapses in half for easy
transport.
UNPACKING
This product has been thoroughly tested and has been shipped in perfect condition. Carefully check
the shipping carton for damage that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your product for damage and be sure all accessories necessary to
assemble the product have arrived intact. In the event damage has been found or parts are missing,
please contact our customer support team for further instructions. Please do not return this product
to your dealer without first contacting customer support at the number listed below. Please do not
discard the shipping carton in the trash. Please recycle whenever possible.
BOX CONTENTS
(2) Metal Table Half Sections (Left and Right)
(2) Black Painted Metal Support Bars
(4) Thumb Screws
(1) Carpeted Shelf
(1) ADJ Logo Front Poster Board
(4) Front Poster Board Screws
www.adj.com
5
CUSTOMER SUPPORT
ADJ® provides a customer support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You may also visit us on the web at
www.adj.com for any comments or suggestions. For service related issue please contact ADJ.
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
Voice: 800-322-6337 Fax: 323-532-2941
E-mail: support@americandj.com
ADJ GROUP SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: +31 45 546 85 30 Fax: +31 45 546 85 96
E-mail: support@adjgroup.eu
WARRANTY REGISTRATION
The PRO EVENT TABLE II is covered by a 1 year (365 days) limited warranty. All returned service
items whether under warranty or not, must be freight pre-paid and accompany a return authorization
(R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief
description of the problem as well as the R.A. number must also be written down on a piece of
paper and included in the shipping container. If the unit is under warranty, you must provide a copy
of your proof of purchase invoice. Items returned without a R.A. number clearly marked on the
outside of the package will be refused and returned at customer’s expense. You may obtain a R.A.
number by contacting customer support.
www.adj.com
6
LIMITED WARRANTY
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of
manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific
warranty periods below). This warranty shall be valid only if the product is purchased within the United States of
America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase
by acceptable evidence, at the time service is sought.
B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product–please
contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC
factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are
within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within
the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be
shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability
whatsoever for loss of or damage to any such accessories, or for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which
ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or
serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser
by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check up. During
the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts,
and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The
sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement
thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were
manufactured after August 15, 2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any
obligation to include these changes in any products theretofore manufactured. No warranty, whether expressed or
implied, is given or made with respect to any accessory supplied with products described above. Except to the extent
prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product,
including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no
warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product
after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is
expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or damage, direct
or consequential, arising out of the use of, or inability to use, this product. This warranty is the only written warranty
applicable to ADJ Products, LLC Products and supersedes all prior warranties and written descriptions of warranty
terms and conditions heretofore published.
LIMITED WARRANTY PERIODS
Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog
Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, Power/Data Distribution, etc. excluding LED and lamps)
Laser Products = 1-Year (365 Days) (excluding laser diodes which have a 6-Month Limited Warranty)
LED Products = 2-Year (730 Days) (excluding batteries which have a 180 Day Limited Warranty)
NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to product purchased within the United States.
StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180 Day Limited Warranty)
ADJ DMX Controllers = 2 Year (730 Days)
American Audio Products = 1 Year (365 Days)
www.adj.com
7
SETUP INSTRUCTIONS
1. Unfold both table sections and position them close towards each other.
2. Intersect both table sections together, inserting one side into the other side.
www.adj.com
8
3. Make sure both table sections fit together properly and there are no gaps/spaces between them.
4. Secure both table sections together by installing (2) black metal table support bars.
Insert square ends of each support bar into the slots on each side of the table.
Insert the front bar first then insert the back bar. Make sure each support bar is completely
inserted into the slots and make sure both table sections are level and sitting on a flat surface.
www.adj.com
9
5. Hand tighten the (4) thumb screws located on the support bar slots on both ends of the table.
6. Place the carpeted shelf inside the top section of the table on top of both metal support bars, with
the open cable hole facing front. Make sure the shelf is completely installed and flat before
placing any equipment on it.
www.adj.com
10
7. Attach included ADJ logo poster board to the front side of the table using the included (4) screws.
Make sure not to overtighten the screws to avoid poster board damage.
PPoosstteerr BBooaarrdd DDiimmeennssiioonnss:: LL
25" (635mm) x H 22.5" (571.5mm)
www.adj.com
11
DIMENSIONAL DRAWINGS
OPTIONAL ACCESSORIES
ORDER CODE
ITEM
PRO888
PRO-SHELF ALUMINUM SHELVES
PRO821
PRO-ETB CARRYING BAG
PRO379
PRO EVENT SCRIM - WHITE
