Cellink 4710874200036 RF Wireless Keyboard User Manual

Cellink Co., Ltd. RF Wireless Keyboard users manual

a href="https://usermanual.wiki/Cellink" itemprop="url"> Cellink >

users manual

RF COMBO 1 BATTERY INSTALLATION Mouse 1. As shown as fig.1 to fig.4, please hold the mouse and press the center part of the two keys with one thumb. Meanwhile, with the other hand, pull the top cap backward and open it. 2. Put two AAA alkaline batteries according to its direction. Then, put back the top cap (as shown as fig.3) aiming at and along with the waist of the mouse. Caution: When battery power is low, the mouse pattern will show red color on the right-down corner of window screen for warning. Keyboard Open the battery cap, which is on keyboard's reverse side, place 4 pieces AAA Alkaline batteries, and put the cap back. Every time after having changed batteries, please reset up the mouse according to the steps of " SETUP FOR USE". HARDWARE INSTALLATION 1. Shut down the power of the computer. (Caution: Do not plug in or out USB or PS/2 connector port when the power of the computer is still on, otherwise will damage the computer.) 2. Connect the green connector of the receiver (according to the type you have bought) to the PS/2 connection port of the computer, or connect the white connector to the USB connection port on the computer. 3. Turn on the computer. SOFTWARE INSTALLATION (DRIVE PROGRAM) 1. Insert the CD / Driver into Drive -D (In case the CD-ROM is in D-drive). 2. Get into "execution" on window screen. Click twice on the file of "setup exe" in D-drive of the CD to proceed setup, and follow the steps indicated in the screen to complete the setup. 3. After the setup has been completed, the screen will restart automatically. And, it will show a mouse pattern on the right-down corner of the screen. Caution: When it is in PS/2 mode, this driver doesn't support "Low battery display". SETUP FOR USE 1. MOUSE: Aim the front point of the mouse at receiver. PRESS FIRST THE BUTTON ON THE REVERSE SIDE OF MOUSE, THEN PRESS THE CONNECTOR BUTTON ON THE RECEIVER. (NEVER DO THE CONTRARY WAY.) The LED lights of the mouse and keyboard will light up. When mouse LED light goes off , it means the setup of the mouse is completed. 2. KEYBOARD: PRESS THE BUTTON ON THE REVERSE SIDE OF KEYBOARD. When the LED light of keyboard goes off, it means the setup of the keyboard is completed as well. And you may start to work with this RF Combo device. 3. The setup must be completed in one minute. If exceeded, please repeat the steps. MOUSE BUTTON FUNCTION SETUP
Download:
Mirror Download [FCC.gov]
Document ID179237
Application ID+3qBazYrzK6uFD75dt5eaA==
Document Descriptionusers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.27kB (65872 bits)
Date Submitted2001-11-14 00:00:00
Date Available2001-11-09 00:00:00
Creation Date2001-10-11 15:17:05
Producing SoftwareAcrobat 4.05 Import Plug-in for Windows
Document Lastmod2001-10-11 15:17:51
Document Titleusers manual
Document CreatorAcrobat 4.05 Import Plug-in for Windows
FCC ID Filing: PQY-4710874200036

Navigation menu