Cellink 4710874200036 RF Wireless Keyboard User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	179237
Application ID	+3qBazYrzK6uFD75dt5eaA==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.27kB (65872 bits)
Date Submitted	2001-11-14 00:00:00
Date Available	2001-11-09 00:00:00
Creation Date	2001-10-11 15:17:05
Producing Software	Acrobat 4.05 Import Plug-in for Windows
Document Lastmod	2001-10-11 15:17:51
Document Title	users manual
Document Creator	Acrobat 4.05 Import Plug-in for Windows

RF COMBO 1
BATTERY INSTALLATION
Mouse
1. As shown as fig.1 to fig.4, please hold the mouse and press the center part of the
two keys with one thumb. Meanwhile, with the other hand, pull the top cap backward
and open it.
2. Put two AAA alkaline batteries according to its direction. Then, put back the top cap
(as shown as fig.3) aiming at and along with the waist of the mouse.
Caution:
When battery power is low, the mouse pattern will show red color on the
right-down corner of window screen for warning.
Keyboard
Open the battery cap, which is on keyboard's reverse side, place 4 pieces AAA Alkaline
batteries,
and put the cap back.
Every time after having changed batteries, please reset up the mouse
according to the steps of " SETUP FOR USE".
HARDWARE INSTALLATION
1. Shut down the power of the computer. (Caution: Do not plug in or out USB or PS/2
connector port when the power of the computer is still on, otherwise will damage
the computer.)
2. Connect the green connector of the receiver (according to the type you
have bought) to the PS/2 connection port of the computer, or connect the white
connector to the USB connection port on the computer.
3. Turn on the computer.
SOFTWARE INSTALLATION (DRIVE PROGRAM)
1. Insert the CD / Driver into Drive -D (In case the CD-ROM is in D-drive).
2. Get into "execution" on window screen. Click twice on the file of
"setup exe" in D-drive of the CD to proceed setup, and follow the
steps indicated in the screen to complete the setup.
3. After the setup has been completed, the screen will restart automatically.
And, it will show a mouse pattern on the right-down corner of the screen.
Caution: When it is in PS/2 mode, this driver doesn't support "Low battery display".
SETUP FOR USE
1. MOUSE:
Aim the front point of the mouse at receiver.
PRESS FIRST THE BUTTON ON THE REVERSE SIDE OF MOUSE, THEN PRESS THE
CONNECTOR BUTTON ON THE RECEIVER. (NEVER DO THE CONTRARY WAY.)
The LED lights of the mouse and keyboard will light up. When mouse LED light goes
off ,
it means the setup of the mouse is completed.
2. KEYBOARD:
PRESS THE BUTTON ON THE REVERSE SIDE OF KEYBOARD. When the LED light
of keyboard goes off, it means the setup of the keyboard is completed as well. And
you may start to work with this RF Combo device.
3. The setup must be completed in one minute. If exceeded, please repeat the steps.
MOUSE BUTTON FUNCTION SETUP
1. Get into setup from the control desk or directly click into the mouse pattern shown in
right-down corner of the screen. It shows the functions as following:
. Button
: setup for habit of using right or left hand,
adjustment of the speed of
continuously pressing twice the mouse
buttons, adjustment of numbers
of column for each rolling.
. Mouse Marking: to set up the pattern or mouse marking.
. Wheel
: to set up the functions of hot key, zooming, and
rolling of auto-turning.
. Motion
: to set up the moving speed of mouse sign, the
length of the dragging
tail, and non-border, etc.
2. After the function is set up, press "Yes" to store the new setup.
TROUBLESHOOTING
If the mouse or keyboard doesn’t function well, please follow the steps below:
1. Check if the connector of USB or PS/2 port is well connected or not.
2. Check if the positive(+) and negative(-) pole of the battery is put correctly. If the power
is low,
the mouse will become sluggish or slow.
3. Reset: Follow the steps of "Setup for use".
HARDWARE MAINTENANCE AND CLEANING
When the mouse doesn't move smoothly or its speed is not normal, please clean the
rolling
ball of the mouse. The steps are as follows:
1. Follow the arrow direction (open with clockwise direction, and close with
counterclockwise
direction) to turn the rolling ball cap, which is under the mouse, to take out the
ball.
2. Wipe the ball with a clean cloth dampen with clean water or alcohol, and wipe the
dust inside
the mouse with a dry clean cloth. After the cleaning is done, put back the ball
and the cap.
(Caution: never clean with organic dissolvent.)
ENVIRONMENT
To avoid environmental interference, which will reduce the effective distance, it should
be noted
below for the mouse and receiver:
1. Do not put the mouse and receiver on metal cabinet or metal desk. It's better
not having
metal or interference source around, which may affect the RF communication,
and
reduce the communication distance.
2. The ideal for the mouse and receiver is having 15-20 cm distant from computers
or, in
3.
any open place.
Keep a distance of more than 1.5m to avoid interference if there are other RF
devices in using
HOW TO REMOVE THE DRIVER
- From the windows taskbar, click the Start, then select Setup, Control desk, Add
/ Remove
program. Find the file USB RF MOUSE and click Add / Remove.
- In the window Confirm File Deletion, click YES.
- In the window RF MOUSE , click the OK.
- Check if the driver is already removed. If yes, click OK.
For any problem in using this device, please reach to the Customer Service Center
through the
e-mail on the website. A response will be forwarded by e -mail to you very soon


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:10:11 15:17:51-04:00
Create Date                     : 2001:10:11 15:17:05-04:00
Creator                         : Acrobat 4.05 Import Plug-in for Windows
Producer                        : Acrobat 4.05 Import Plug-in for Windows
Page Count                      : 4

EXIF Metadata provided by EXIF.tools