Cellphone Mate SureCall F2GO3 5 Band Mobile Booster User Manual
Cellphone-Mate Inc. dba SureCall 5 Band Mobile Booster
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4011875 |
| Application ID | vNyE04manDTMOuNxTUrnpw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 131.97kB (1649628 bits) |
| Date Submitted | 2018-09-19 00:00:00 |
| Date Available | 2018-09-21 00:00:00 |
| Creation Date | 2018-09-17 13:50:23 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-09-17 13:50:32 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2017 (Macintosh) |
Fusion2Go™ 3.0 v2 Vehicle Voice and 4G Data Signal Booster User Guide 09.18.2018 Table of Contents Thank you for purchasing SureCall’s Fusion2Go 3.0 cell phone signal booster kit. Fusion2Go 3.0 provides enhanced voice, text and 4G data signal for any vehicle. If you have any questions during setup, please reach out to our US-based experienced support technicians: • Call: 1-888-365-6283 • Email: support@surecall.com How It Works.................................................................................................................................. 3 How It Works How It Works The SureCall Fusion2Go 3.0 is a high-quality bidirectional booster that enhances cellular signals for vehicles. The Fusion2Go 3.0 works with two antennas: • An inside antenna that communicates with your cell phone. • An outside antenna that communicates with the cell tower. Signals sent from a cell tower are received by the outside antenna, amplified by the booster and then sent to your cell phone via the inside antenna. When your phone transmits, the signal is sent to the inside antenna, and then sent to the cell tower via the outside antenna. Package Contents.......................................................................................................................... 4 Step 1: Mount Outside Antenna..................................................................................................... 5 Step 2. Install the Inside Patch Antenna......................................................................................... 5 Step 3. Place Booster and Connect Cables.................................................................................. 6 Step 4. Connect Power.................................................................................................................. 7 LED Indicators ............................................................................................................................... 8 Troubleshooting.............................................................................................................................. 8 Outside Magnetic Antenna Inside Antenna Specifications................................................................................................................................. 9 Antenna Kitting Information.......................................................................................................... 10 Consumer Guidelines................................................................................................................... 12 Power Adapter Fusion2Go Three-Year Product Warranty....................................................................................................... 13 SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com Package Contents Installation Package Contents Step 1: Mount Outside Antenna 1. Unpack all package contents. For missing or damaged items, contact your reseller. Place the magnetic-mount antenna on the top of your vehicle, preferably toward the back, maximizing the distance from planned location of the inside patch antenna. Ensure that the antenna has at least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna. 2. Turn over the signal booster and record the model and serial number for reference: Serial #: Purchase Date: 3. Keep the carton and packing material to store the product in case you need to return it. Your Fusion2Go 3.0 signal booster package includes the following items: • One SureCall Fusion2Go 3.0 signal booster • DC power adapter • One inside patch antenna • One outside magnetic mount antenna One free magnetic vent clip Note, For applications that require a more secure mount or where mounting surface is not metal, an optional adhesive mount has also been included with your kit. Follow these guidelines for use of adhesive mount: • Always clean the surface properly. Apply the tape as soon as possible after cleaning to avoid contaminants • Use an adequate amount of tape • Ensure that all materials meet the required minimum tape application temperature of 15°C • Roll down tape firmly both after tape application and then again after parts are bonded together Next, run the cable from the outside antenna across the car’s roof and into the car. To hide and protect the antenna cable, carefully pull down the door seal, run cable underneath it and push the seal back into place. Run the cable to the inside of the vehicle near the planned location of the booster (under the seat of the vehicle, or in the front or middle console). Note: T he outside antenna must not be collocated or operating with any other antenna or booster. Fusion2Go 3.0 Amplifier Power Adapter Inside Patch Antenna Outside MagneticMount Antenna and optional adhesive mount Step 2. Install the Inside Patch Antenna Identify a location for the inside antenna on or near your front dashboard that is 1. Within 2-3 feet of the typical cell phone location 2. At least 8 inches (20cm) from cellular devices and 3. At least 4 inches (10cm) from metal SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com Installation Installation Next, peel Velcro backing and apply to a clean dry surface in your chosen location. Or try this - Use the free vent clip provided with your product as a mounting surface then simply clip to an air vent. Step 4. Connect Power Step 3. Place Booster and Connect Cables Connect the power cord connector to the signal booster and insert the other end into your cigarette lighter adapter1. The Power LED illuminates to show that the signal booster is ready for use. The Alert LEDs flash 5 times to show the frequency band is operational. Select a well-ventilated location for the booster that is away from excessive heat, direct sunlight, and moisture. We often suggest installing beneath a seat or within the front console. Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal. Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the cable from inside patch antenna to the connection marked INSIDE. Tighten the connections and wrap up any loose cable. Note: When your car is off, turn the power switch to OFF to keep the booster from continuing to draw power from your vehicle. [1] WARNING: The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster and/or cause personal injury. Outside Magnetic Antenna LTE-A LTE-V CELLULAR PCS AWS LTE-A POWER Power Connector Power Switch DC Power Adapter LTE-V CELLULAR POWER PCS AWS Inside Patch Antenna SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com DC Power Jack SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com Troubleshooting LED Indicators Specifications Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal. Normal operation is indicated by Green LEDs (both flashing and solid). In the event Red LEDs appear, antenna adjustments may be needed. Product Fusion2Go 3.0 (US) Fusion2Go 3.0 v2 (Canada) Uplink Frequency Range (MHz): 698‑716 / 776‑787 / 824‑849 / 1850‑1915 / 1710‑1755 (G Block Included) Downlink Frequency Range (MHz): 728‑746 / 746‑757 / 869‑894 / 1930‑1995 / 2110‑2155 (G Block Included) Color Condition Indication Input / Output Impedance: 50 Ω Green Solid Indicates normal operation. Maximum Gain: 50 dB Green Flashing Normal operation. Indicates that Automatic Gain Control (AGC) is self-adjusting due to oversignal or antenna proximity. Gain Adjustment: 20 dB (Automatic) Red Flashing Indicates issues caused by overpowering or oscillation. Maximum Uplink Power 29.0 dBm Noise Figure: ≤ 5 dB VWSR: ≤ 2.0 Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards DC Power: 6-15V Maximum Output Power: 1 Watt EIRP Cable: SC-174 RF Connectors: FME Male (both ends) Power Consumption: ≤ 10W Adjustment of your outside antenna placement is likely needed. Verify that it has sufficient separation from the inside antenna, as well as, any potentially interfering objects or antennas Note that the booster case may become warm during operation. This is normal. Troubleshooting Problem Resolution Signal booster has no power Verify that the Power LED is ON. Operation Temperature: -4º to +158º F Connect the power supply to an alternate power source. Dimensions: 5.625 x 4 x 1.125 inches Weight: 1.43 lbs Certification: FCC ID: RSNF2GO3 Verify that the power source is operational and the fuse is intact. If it remains OFF, contact tech support at: 1-888-365-6283 or support@surecall.com After completing installation, signal has not Improved Specifications IC: 7784A-F2GO3 Verify that cable connections are tightly fitted to the booster. Try further separating the antennas. Note: The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Note: Bars are not always a reliable measure of signal. The best way to confirm signal coverage is the ability to place and hold a call. SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com Kitting Information Antenna Kitting Information Component Prod No. Description Kitting Information Gain LTE-A LTE-V 800 MHz 1900 MHz Vehicle Outdoor Antenna and Cable SC-202W and SC174-12.5 ft (12.5 ft) -3.16 dB -5.15 dB -5.65 dB -2.85 dB -3.34 dB / NG Outdoor Antenna and Cable SC200W and SC174-10 ft (10 ft) -2.3 dB -2.3 dB -2.3 dB -5.8 dB -3.98 / -5.96 dB Indoor Antenna and Cable SC110W and SC174-10 ft (10 ft) -2.7 dB -2.7 dB -3.2 dB -5.8 dB -3.98 / -5.96 dB *All equivalent antennas and cables are suitable for use with the Fusion2Go 3.0 v2 Gain Component Prod No. Description LTE-A LTE-V 800 MHz 1900 MHz 1700 MHz / 2100 MHz Marine Outdoor Antenna and Cable SC288W or Galaxy 5412-P and SC240-40FN (40 ft) -0.52 dB -0.52 dB -0.98 dB -2.52 dB -2.12 / -2.92 dB Indoor Antenna and Cable SC248W Panel and SC240-20FN (20 ft) 4.94 dB 4.94 dB 4.71 dB 6.44 dB 6.64 / 6.24 dB Indoor Antenna and Cable SC302W and SC240-20FN (20 ft) 0.44 dB 0.44 dB 0.71 dB 1.44 dB 0.64 / 1.24 dB Outdoor Antenna and Cable SC288W and SC240-40FN (40 ft) -0.52 dB -0.52 dB -0.98 dB -2.52 dB -2.12 / -2.92 dB Indoor Antenna SC120W whip 1.2 dB 1.2 dB 1.2 dB 3 dB 3 / 3 dB Indoor Antenna and Cable SC302W and SC240-20FN (20 ft) 0.44 dB 0.44 dB 0.71 dB 1.44 dB 0.64 / 1.24 dB Desktop / RV *All equivalent antennas and cables are suitable for use with the Fusion2Go 3.0 v2 •• Warning: Unauthorized antennas, cables, and/or coupling devices are prohibited by FCC new rules. Changes or modifications not expressly approved by SureCall could void the user’s authority to operate the equipment. •• FCC 27.50(d)(4) Statement: Fixed, mobile and portable (hand-held) stations operating in the 1720-1755 MHz band are limited 1 Watt EIRP. Fixed stations operating in this band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable stations operating in this band must employ a means for limiting power to the minimum necessary for successful communications. When used with any mobile device utilizing the 1710-1755 MHz band, the FCC limits booster equipment placement to a maximum of 10 meters above ground level. Installation of this equipment which does not comply with federal requirements may subject the owner to FCC enforcement action. 10 SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com PreAGC 1700 MHz / 2100 MHz PreAGC Pulse GSM 4.1 MHz AWGN Frequency (MHz) Input (dBm) Output (dBm) Gain (dB) Input (dBm) Output (dBm) Gain (dB) Uplink: 1710-1755 -27.2 20.0 47.2 -25.3 20.7 46.0 Uplink: 1850-1915 -25.6 20.9 46.5 -25.9 19.6 45.5 Uplink: 824-849 -25.3 22.3 47.6 -21.7 25.6 47.3 Uplink: 698-716 -24.1 28.0 47.1 -20.1 26.6 46.7 Uplink: 777-787 -21.3 25.6 46.9 -20.5 25.9 46.4 Downlink: 2110-2155 -48.5 -3.7 44.8 -49.4 -4.5 44.9 Downlink: 1930-1995 -45.7 1.0 46.7 -46.7 0.2 46.9 Downlink: 869-894 -51.1 -5.5 45.6 -51.6 -5.8 45.8 Downlink: 728-746 -48.0 -0.3 47.7 -48.4 -1.8 46.6 Downlink: 746-757 -49.4 -2.8 46.6 -50.9 -4.3 40.6 FCC 15.105 Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com 11 Warranty Safety Information Consumer Guidelines Three-Year Product Warranty This is a CONSUMER device BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05 1 You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e. MUST NOT be installed within 20 cm of) any person. You MUST cease operation of this device immediately if requested by the FCC (or ISED in Canada) or a licensed wireless service provider. WARNING: E911 location information may not be provided or may be inaccurate for calls served by using this device. Ce produit est un appareil de CONSOMMATION AVANT DE L’UTILISER, vous DEVEZ ENREGISTRER CE DISPOSITIF auprès de votre fournisseur de services cellulaires et obtenir son consentement. La plupart des fournisseurs de services cellulaires autorisent l’utilisation d’amplificateurs de signal. Il se peut que certains fournisseurs n’autorisent pas l’utilisation de ce dispositif sur leur réseau. Si vous n’êtes pas sûr, contactez-le. Au Canada, AVANT DE L’UTILISER vous devez répondre à toutes les exigences ISED CPC-2-1-05 2 Vous DEVEZ utiliser ce dispositif avec les antennes et les câbles autorisés, tel que le spécifie le fabricant. Les antennes DOIVENT être installées à au moins 20 cm (8 po) (NE DOIVENT PAS être installées à moins de 20 cm) de toute personne avoisinante. Vous DEVEZ arrêter cet appareil immédiatement à la demande de la FCC (ISED au Canada) ou de tout fournisseur de services cellulaires autorisé. AVERTISSEMENT: Il se peut que les informations relatives à la localisation E911 ne soient pas disponibles ou soient inexactes pour les appels qui utilisent cet appareil. Register your cellular booster with your wireless carrier at the following urls: Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html AT&T: https://securec45.securewebsession.com/attsignalbooster.com/ T-Mobile: https://support.t-mobile.com/docs/DOC-9827 Sprint: https://www.sprint.com/legal/fcc_boosters.html U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp CAN ICES-3 (B)/NMB-3(B) (Canada) : This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device. Cet appareillage numérique de la classe B répond a toutes les exigencies de l’interférence canadienne causant des réglements d’équipment. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle intérference reçue, y compris l’intérference qui peut causer l’opération peu désirée. La puissance de sortie nominale indiquée par le fabricant pour cet appareil concerne son fonctionnement avec porteuse unique. Pour des appareils avec porteuses multiples, on doit réduire la valeur nominale de 3,5 dB, surtout si le signal de sortie est retransmis et qu’il peut causer du brouillage aux utilisateurs de bandes adjacentes. Une telle réduction doit porter sur la puissance d’entrée ou sur le gain, et ne doit pas se faire au moyen d’un atténuateur raccordé à la sortie du dispositif. 1 For details on the requirements specified in ISED CPC-2-1-05, visit: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html 2 Pour plus de détails sur les exigences ISED CPC-2-1-05, reportez-vous au site: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html 12 SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com Register at www.SureCall.com SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014. Products returned by customers must be in their original, un-modified condition, shipped in the original or protective packaging with proofof-purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the outside of the shipping container. Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. (The Buyer does not need to include accessories sold in addition to the signal booster, such as antennas or cables.) This warranty does not apply to any product determined by SureCall to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages the product’s physical or electronic properties. SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workmanship, and will perform in full accordance with applicable specifications. The limit of liability under this warranty is, at SureCall’s option, to repair or replace any product or part thereof which was purchased up to THREE YEARS after May 1, 2014 or TWO YEARS for products purchased before May 1, 2014, as determined by examination by SureCall, prove defective in material and/or workmanship. Warranty returns must first be authorized in writing by SureCall. Disassembly of any SureCall product by anyone other than an authorized representative of SureCall voids this warranty in its entirety. SureCall reserves the right to make changes in any of its products without incurring any obligation to make the same changes on previously delivered products. As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all products returned to SureCall for repair, and SureCall will pay the return shipping with the exception of products returned from outside the United States, in which case the Buyer will pay the shipping charges. The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, which are found to meet the applicable specifications or which are not defective or not covered by this warranty. Products sold by SureCall shall not be considered defective or non-conforming to the Buyer’s order if they satisfactorily fulfill the performance requirements that were published in the product specification literature, or in accordance with samples provided by SureCall. This warranty shall not apply to any products or parts thereof which have been subject to accident, negligence, alteration, abuse, or misuse. SureCall makes no warranty whatsoever in respect to accessories or parts not supplied by it. Limitations of Warranty, Damages and Liability: EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING. SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL SURECALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER CAUSED. All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California, and any controversy that cannot be settled directly shall be settled by arbitration in California in accordance with the rules then prevailing of the American Arbitration Association, and judgment upon the award rendered may be entered in any court having jurisdiction thereof. If one or more provisions provided herein are held to be invalid or unenforceable under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof. SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers. SureCall shall not be held liable to anyone for any indirect, special or consequential damages due to omissions or errors. The information and specifications in this document are subject to change without notice. © 2018. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com 13 48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 www.surecall.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c138 79.159824, 2016/09/14-01:09:01 Create Date : 2018:09:17 13:50:23-04:00 Metadata Date : 2018:09:17 13:50:32-04:00 Modify Date : 2018:09:17 13:50:32-04:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Instance ID : uuid:be63e449-d805-d54d-9712-c92dbb004ea4 Original Document ID : xmp.did:ED7F117407206811AFFDC0EF630C59C0 Document ID : xmp.id:10416bc7-8dec-46d7-9a95-0a3ace330cd4 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:d5ec8bf3-418d-4f50-9596-513d274f4d9a Derived From Document ID : xmp.did:5ce8efc1-3cc2-4e8a-a8de-daf52a10d534 Derived From Original Document ID: xmp.did:ED7F117407206811AFFDC0EF630C59C0 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2018:09:17 13:50:23-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : OneColumn Page Count : 8 Creator : Adobe InDesign CC 2017 (Macintosh)EXIF Metadata provided by EXIF.tools