Centrak 2X37Y DIM Hygiene Monitor IT-370/373/374/375 User Manual Report
Centrak, Inc. DIM Hygiene Monitor IT-370/373/374/375 Report
Centrak >
Users Manual
Document Name:
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 1 of 6
CenTrak
Hand Washing Monitor
Hardware Installation
Guide
Warning:
This guide is in draft form and can be changed without notice at
anytime by CenTrak. Please contact CenTrak prior to commercial
use to receive all the necessary and latest information about the
system.
Copyright © 2010 CenTrak, Inc. All rights reserved.
Caution: Any changes or modifications not
expressly approved by the party responsible
for product compliance could void the user's
authority to operate the equipment.
Document Name:
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 2 of 6
How to Install
the CenTrak Hand
Washing Monitor
Hardware
Items Needed ............................................................... 3
Small Round Soap Dispenser Installation ................ 4
Large Round Soap Dispenser Installation ............... 5
Flat Front Sanitizer Dispenser Installation ............... 6
Small Round Dispenser
Large Round Dispenser
Flat Front Dispenser
CENTRAK HWM HARDWARE INSTALLATION GUIDE
Document Name:
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 3 of 6
How to Install the CenTrak Hand Washing
Monitor Hardware
Items needed for Installation
CenTrak Hand Washing Monitor
Rounded back, double stick adhesive mount
(for use on round dispensers)
Flat double stick adhesive mount
(for use on flat front dispensers)
Flat side
mounts to
HWM
Round back
mounts to
dispenser
For use on flat front
type dispensers
CENTRAK HWM HARDWARE INSTALLATION GUIDE
Document Name:
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 4 of 6
Small Round Soap Dispenser
A-1. Peel off flat side of adhesive backing and firmly
place flat side down onto Hand Washing Monitor as
shown in Figure A-1.
Press on firmly for 15 seconds.
A-2. Peel off curved side of adhesive covering and
place Hand Washing Monitor (HWM) onto dispenser,
making sure to mount more than 3 inches above push
mechanism (where soap comes out).
Press firmly and hold for 15 seconds.
Fig. A-2
Fig. A-1
Flat side
mounts to
HWM
Round back
mounts to
dispenser
CENTRAK HWM HARDWARE INSTALLATION GUIDE
Document Name:
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 5 of 6
Large Round Soap Dispenser
B-1. Peel off flat side of adhesive backing and
firmly place flat side down onto Hand Washing
Monitor as shown in Figure B-1.
Press on firmly
for 15 seconds.
B-2. Peel off curved side of adhesive covering and
place Hand Washing Monitor onto dispenser,
making sure to mount above push mechanism (3”
above where soap comes out).
Press firmly and hold for 15 seconds.
Fig. B-2
Fig. B-1
Flat side
mounts to
HWM
Round back
mounts to
dispenser
CENTRAK HWM HARDWARE INSTALLATION GUIDE
Document Name:
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 6 of 6
Flat Front Sanitizer Dispenser
C-1. Using the flat double stick mounting adhesive,
Peel off adhesive backing and firmly place onto
back of Hand Washing Monitor. Then remove
backing from other side.
C-2. Place HWM onto dispenser, 4-5 inches above
where soap comes out.
Press firmly and hold for 15 seconds.
Fig. C-2
Fig. C-1